Upload
lorenzin
View
30
Download
4
Embed Size (px)
DESCRIPTION
scambiatore
Citation preview
GEA ECOFLEX Plate Heat Exchanger: NT100M CDL-10
Thermal data for 1 unit(s) in parallel and 1 unit(s) in series
hot side cold side
Media: Water Water
Media group acc. PED 97/23/EC: Group 2 - others Group 2 - others
Heat exchanged: 600,00 kW
Mass flow: 51616 51735 kg/h
Volume flow: 52,84 52,68 m³/h
Temperature inlet: 75,00 55,00 °C
Temperature outlet: 65,00 65,00 °C
Pressure drop: 0,38 0,36 bar
Working pressure inlet: 1,50 1,50 barg
Filling volume: 0,03029 0,03161 m³
Product properties
Density: 976,82 982,03 kg/m³
Heat capacity: 1,00015 0,99785 kcal/kg°C
Thermal conductivity: 0,66147 0,65329 W/mK
Dyn. viscosity inlet: 0,377 0,502 cP
Dyn. viscosity outlet: 0,432 0,432 cP
Unit Data
Plate Type: NT100M HV
Heat transfer area (total / per unit): 21,85 21,85 m²
Number of plates (total / per unit): 48 48
Plate thickness: 0,50 mm
LMTD: 10,00 K
Surface margin: 95,1 %
Plate material: AISI316
Gasket material / Gasket type: EPDM glueless
Internal flow (passes x channels): 1 x 23 1 x 24
No. of frames (par. / ser. / total): 1 1 1
Frame material und surface: S235-JRG2 painted RAL5002
alternative: S355 J2+N
CIP:
The connection types and positions are defined in the attached dimension sheet.
Design temperature: Min.: 0,00 / 0,00 Max.: 100,00 / 100,00 °C
Design pressure: Min.: 0,00 / 0,00 Max.: 10,00 / 10,00 barg
Test pressure: 13,00 / 13,00 barg Design code: PED 97/23/EC AD-2000 Checkfactor 1.3
PED category: Art.3, Abs. 3, , Normal
Conformity assessment diagram: Medium innocuous and steam pressure at Tdesign> 0.5 barg