Upload
cade
View
36
Download
0
Tags:
Embed Size (px)
DESCRIPTION
PBv2.x Pen F/W Upgrade SOP. WWPM_Brian Hung 2011/12/21. The H/W tool only support Windows XP !!. 1. Plug the H/W tool to PC via USB port. Install H/W Tool Driver. 1. Find the device from device manager. 2. Browse the folder of “ WinXP driver” to update the driver. - PowerPoint PPT Presentation
Citation preview
PBv2.x Pen F/W Upgrade SOPWWPM_Brian Hung
2011/12/21
1. Plug the H/W tool to PC via USB port.
The H/W tool only support
Windows XP!!
1. Find the device from device manager2. Browse the folder of “WinXP driver” to update the driver.
Install H/W Tool Driver
Install F/W Upgrade Program
1. Execute “FET-Pro430-Setup.exe“ and finish the installation process
1. Turn off the PB.
2. Connect the PB to H/W tool.
1. Execute “Lite FETPro430”
1. Change the setting as the figure.
1. Change the “Memory Options“ as the figure.
1. Change the “Connection/Device Reset“ as the figure.
1. Click “Open Code File” and choose correct F/W file.
1. Click “AUTO PROG.”.
1. Check the Status is Pass
2. Check if the Check sum of source and memory are the same.