Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Pad Mounted Transformer is designed for underground distribu�on facility, streetlights, place adjacent to residen�al area, school, building, hospital and factory. It is possible to install it near downtown load area. Since it is equipped with protec�on fuse and fault current limi�ng fuse, it can prevent damage to transformer and error expansion in case of error in transformer. External power connec�on unit is designed to be completely insulated. It is available in Radial Feed and Loop Feed type configura�on.
Product F eature s: Single Phase or Three Phase Voltage: Up to 36kV Power Rating: Up to 3000kVA Frequency 50 or 60 Hz Radial Feed or Loop Feed construc�on Live Front or Dead Front construc�on Tank made of mild steel with corrugated Fin walls or Radiators Front Panel can be made of Stainless Steel as an op�on Off-Circuit tap changer Load Break MV bushings Spade type LV bushings 2 or 4-Posi�on Load Break Switch Bay-o-net Expulsion Fuses in series with Current Limi�ng Fuses Pressure Gauge Dial type Contact thermometer Safety Valves Earthing terminals Filter Valve, Drain & Sampling Valve
Technical Data :
Applications : Street Lights Places adjacent to residen�al areas School buildings Hospitals Factories
Note: Specifica�on subject to change without prior no�ce. Custom Design Pad Mounted Transformers with different electrical and mechanical specifica�ons are available on request.
Rated Power: Up to 3000kVA Rated Primary Voltage: Up to 36kV Rated Secondary Voltage: 11kV, 6.6 kV, 3.3 kV, 480V, 415V, 400V, 380V etc. Rated Frequency: 50Hz, 60Hz Phases: Single Phase or Three-phase Temperature Rise Oil/Winding: 50/55 oC , 60/65 oC Design Ambient Temperature: 40 oC Opera�ng Humidity: Up to 95% relative humidity Cooling Method: ONAN Insula�ng Oil Type: Mineral Oil, Bio degradable Oil, Silicone Oil
Pad Mounted Transformers