Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Emerging Technologies in Mechanical Engineering 2018 (ETME
2018) is held at the Ramada Plaza Jeju Hotel (Jeju, Korea) on August
19-22, 2018.
ETME, which is held every two years, is hosted by the Korean
Society of Mechanical Engineers (KSME), the Chinese Mechanical
Engineering Society (CMES) and the Japan Society of Mechanical
Engineers (JSME), but it is an academic conference involving
mechanical engineers from all over the world. Mechanical engineering
should take another leap forward with emerging technologies not only
from inside mechanical engineering, but also from outside, based on
artificial intelligence, big data, IOT and so on. In this regard, the need
for academic conferences to discuss various emerging technologies in
depth in the field of mechanical engineering is somewhat late.
ETME 2018 is aimed at promoting cooperation not only among
researchers and engineers around the world but also between all
experts in the mechanical engineering field. This conference will
provide various programs such as plenary lectures, keynote lectures,
oral/poster sessions, and social tour and so on.
The Organizing Committee truly welcomes all participants to Jeju
for this unique gathering in the midst of enchanting environment of the
World Natural Heritage.
Wan Doo Kim, Ph.D.General Chair of ETME 2018
Korea Institute of Machinery & Materials, Korea
6
General Chairs
Advisory Committee Members
Program Chairs
Publicity Chairs
Special Program Chair
Local Organizing Chair
Workshop Chair
● Wan Doo Kim, Korea Inst. of Machinery & Materials, Korea● Li Peigen, Huazhong Univ. of Science and Technology, China● Marie Oshima, The Univ. of Tokyo, Japan
● Hyung Hee Cho, Yonsei Univ., Korea● Zhang Yanmin, Chinese Mechanical Engineering Society, China● Naoya Sasaki, Hitachi, Ltd., Japan
● Jae-Bok Song, Korea Univ., Korea● Wang Decheng, China Academy of Machinery Sciences, China● Shin Morishita, Yokohama Nat’l Univ., Japan
● Eui-Sung Yoon, Korea Inst. of Science and Technology, Korea● Lu Daming, Chinese Mechanical Engineering Society, China
● Jae Jong Lee, Korea Inst. of Machinery & Materials, Korea
● Cheol Kim, Kyungpook Nat’l Univ., Korea
● Doo Yong Lee, Korea Advanced Inst. of Science and Technology, Korea
Organizing Committee
Finance Chair
Exhibition Chair
● Chan Il Park, Gangneung-Wonju Nat’l Univ., Korea
● Heon-Sul Jeong, Kunsan Nat’l Univ., Korea
7
Emerging Technologies in Mechanical Engineering
Award Chairs
Publication Chairs
Session Organizers
Secretary
● Haecheon Choi, Seoul Nat’l Univ., Korea● Zhou Yu, Harbin Inst. of Technology, China
● Maenghyo Cho, Seoul Nat’l Univ., Korea● Wang Shuqin, Chinese Mechanical Engineering Society, China
● Hyunsu Kim, Dong-Eui Univ., Korea● Hae-Jin Choi, Chung-Ang Univ., Korea● Hyungpil Moon, Sungkyunkwan Univ., Korea● Jin Weon Kim, Chosun Univ., Korea● Hyun Chul Kim, Nat’l Research Foundation of Korea, Korea● Kyoungdoug Min, Seoul Nat’l Univ., Korea● Yoon Hyuk Kim, Kyung-Hee Univ., Korea● Chang Woo Lee, Korea Inst. of Machinery & Materials, Korea● Tae Jun Kang, Inha Univ., Korea● Ho-Young Kim, Seoul Nat’l Univ., Korea● Young-Deuk Kim, Hanyang Univ., Korea● Dong-Kwon Kim, Ajou Univ., Korea● WonHee You, Korea Railroad Research Inst., Korea● Juhyun Jeon, Chung-Ang Univ., Korea● Gyuhae Park, Chonnam Nat’l Univ., Korea● Hak Joo Lee, Korea Inst. of Machinery & Materials, Korea● Woochul Kim, Yonsei Univ., Korea● Hoon Eui Jeong, Ulsan Nat’l Inst. of Science and Technology, Korea● Youngseog Lee, Chung-Ang Univ., Korea● Sang Gyu Choi, Korea Inst. of Machinery & Materials, Korea● Sehyun Shin, Korea Univ., Korea● Si-Hyung Lim, Kookmin Univ., Korea● Kyung-Tae Kang, Korea Inst. of Industrial Technology, Korea● Jin Hyung Kim, Korea Embassy in Germany, Korea● So-Nam Yoon, Korea Inst. of Machinery & Materials, Korea● Chong Doo Cho, Inha Univ., Korea
● Junhee Lee, Korea Inst. of Machinery & Materials, Korea
8
Conference Venue
Conference Information
Ramada Plaza Jeju Hotel is a top-notch deluxe hotel which is located within five minutes ride
from both Jeju Harbor and Jeju International Airport. It can be reached within an hour wherever you
are on the Jeju Island.
Various types of 380 guest rooms which command a magnificent view of mountains and the
sea are in place awaiting their guests. Besides, attached facilities such as the convention center
which can accommodate up to 1,200 people, small and medium-sized seminar rooms, health club,
indoor and outdoor swimming pools, and hot spa, etc. guarantee successful business transactions
and comfortable amenities to its guests.
Floor Plan
9
Emerging Technologies in Mechanical Engineering
Registration
Participants can register on-site during the conference at the lobby, 2F, Ramada Plaza Jeju Hotel.
The registration fee is as below.
For each category in the above, please refer to the followings:
Regular
All authors, co-authors, participants from industry, private and governmental research and
development laboratories, independent consultants and technical managers, etc. The regular fee
includes admission to all technical sessions, break refreshments, lunches, welcome reception,
banquet, and a conference kit including an abstract book.
Student
Graduate or undergraduate university students. The student fee includes admission to all
technical sessions, break refreshments, lunches, welcome reception, banquet, and a conference kit
including an abstract book. Students should be able to present a valid student ID/certificate during
registration.
Accompanying Person
Spouses or family members of participants. The accompanying person fee includes admission to
banquet.
Categories Registration Fee
KSME/CMES/JSME MemberRegular USD 700
Student USD 350
Non-MemberRegular USD 750
Student USD 400
Accompanying Person USD 100
10
Social Events
Welcome Reception
• Date : August 19 (Sun.)
• Time : 18:00-19:30
• Place : Lobby (2F), Ramada Plaza Jeju Hotel
Opening Ceremony
• Date : August 20 (Mon.)
• Time : 13:00-13:15
• Place : Ballroom 1 (2F), Ramada Plaza Jeju Hotel
Conference Banquet
Dinner will be served in buffet style. Performance by ‘Jeju Special Self-Governing Dance
Company’ is scheduled during Conference Banquet.
• Date : August 21 (Tue.)
• Time : 19:00-20:30
• Place : Ballroom (2F), Ramada Plaza Jeju Hotel
Closing Ceremony / Lottery
• Date : August 22 (Wed.)
• Time : 13:00-13:15
• Place : Ballroom 1 (2F), Ramada Plaza Jeju Hotel
Social Tour (The applicants only)
Following the conference, an optional tour will conclude the conference on Wednesday, August
22, 2018. This tour will include an English-speaking guide, lunch (sandwiches), tour bus, and
admission fee.
• Meeting : 13:30 / Lobby (1F), Ramada Plaza Jeju Hotel
• Time : 13:30~18:00
• Tour Course : Ramada Plaza Jeju Hotel → Hallim Park → Yongmeori Coast → Ramada Plaza
Jeju Hotel
11
Emerging Technologies in Mechanical Engineering
General Information
Certificate of Participation
Certificate of Participation is included in the name tag set. In case you happen to lose it, you can
request it by e-mail after the conference ([email protected]).
Oral Presentation
1. Time allocation
- Plenary Lectures: 50 min. (45 min. speech + 5 min. Q&A)
- Keynote Lectures: 40 min. (35 min. speech + 5 min. Q&A)
- Oral Presentations: 15 min. (12 min. speech + 3 min. Q&A)
2. Laptops with MS Power Point installed will be provided to each room. Presenters who wish to
use any other programs are kindly advised to bring their own laptops and projector cable.
Poster Presentation
1. Presenters should prepare their posters appropriate for the size of the poster stand. Available
work area is 120 cm tall by 90 cm wide.
2. Presenters are responsible for posting and retrieving their posters. Pushpins or tapes will be
provided.
3. Presenters are required to set up their posters just after the previous oral sessions or plenary
lectures, and are required to stay by their posters during the entire session. After the session,
the posters and associated materials should be promptly removed.
4. The poster boards will be numbered by the organizers. The numbers of your poster board is
available on page 22~26.
Session Day Time Location
Poster Session (MoB)August 20 (Mon.)
10:45~11:45
Lobby, 2F
Poster Session (MoD) 17:00~18:00
Poster Session (TuB)August 21 (Tue.)
10:45~11:45
Poster Session (TuD) 17:30~18:30
Poster Session (WeC) August 22 (Wed.) 12:15~13:00
Award
The Award Committee will recognize the Best Paper Award. The winners will be selected based
on the quality of papers and presentations. Award Ceremony is scheduled in Closing Ceremony on
August 22.
12
Lottery
A variety of prizes are prepared for participants. In order for you to win the lottery, please attend
Closing Ceremony, which will be held on August 22 (Wed.). Please do not forget to bring your
lottery ticket, which is in your name tag.
Lunch
Day Time Place
August 20 (Mon.)11:45~13:00 Black Stones & Tammora (1F)
August 21 (Tue.)
Map of Restaurant
Lobby
Main Entrance
Deli shop
1F
BLACK STONES(Lunch)
Tammora(Lunch)
Black Stones & Tammora(Lunch)
13
Emerging Technologies in Mechanical Engineering
Wireless Internet
Wireless internet is available for the conference participants in the conference venue.
Taxi
In Korea, there are two types of taxis, the regular and the Mobum (black color with yellow taxi
cap on the roof). Usually Mobum taxi runs with bigger and nicer cars, but it charges more than the
regular taxi. You can easily find taxis everywhere in Jeju.
Credit Cards
Major international credit cards are commonly accepted at most hotels, department stores,
restaurants, and shops. Restaurants and shops generally display signs indicating what cards they
accept.
Electricity
In Korea, outlets for 220 volts 60 Hertz are dominant. Always check the power supply before
using your equipment.
Emergency Phone Number
- 119 : Fire, Rescue & Hospital Services
- 112 : Police
- 1330 : Korea Travel Phone
14
Conference Topics
Program Information
Thermal Engineering
IT Applications
Fluids Engineering
Smart Machines & Sensors
Energy
Devices for Energy Conversion
Robotics
Dynamics & Control
AI Applications
Biomedical Engineering
Biomimetic Technology
Micro/Nano Systems
Safety, PHM & Reliability
CAE & Computational Studies
Education
3D Printing
Nanomanufacturing & Applications
Metamaterials
Engineering Materials
Manufacturing & Design
Transportation
15
Emerging Technologies in Mechanical Engineering
Plenary/Keynote Lecturers
August 20 (Mon.)Algorithm-based Automated Synthesis of Linkage Mechanisms
Prof. Yoon Young Kim
Seoul Nat’l Univ., Korea
Monday, August 20 / 13:15~14:15, Ballroom 1 (2F)
August 21 (Tue.)Intelligent Manufacturing in Chinese Industry
Prof. Li Peigen
Huazhong Univ. of Science and Technology, China
Tuesday, August 21 / 13:00~14:00, Ballroom 1 (2F)
Trends of R&D of Robot Technology and Its Societal Dissemination in
Japan
Prof. Hajime Asama
The Univ. of Tokyo, Japan
Tuesday, August 21 / 14:00~15:00, Ballroom 1 (2F)
Plenary Lecturers
16
August 20 (Mon.)From Reliability Design to Reliability Manufacture
Prof. Shan-Tung Tu
East China Univ. of Science and Technology, China
Monday, August 20 / 14:15~15:00, Ballroom 2 (2F)
August 21 (Tue.)A New Generation of Intelligent Manufacturing and Corresponding Talent
Cultivation
Prof. Ming Chen
Tongji Univ., China
Tuesday, August 21 / 15:15~16:00, Ballroom 2 (2F)
Numerical Study of Particle-laden Turbulence
Prof. Changhoon Lee
Yonsei Univ., Korea
Monday, August 20 / 14:15~15:00, Ballroom 3 (2F)
High-throughput Detection of Cellular Traction Forces for Screening of
Drugs and Regulatory Genes
Prof. Shinji Deguchi
Osaka Univ., Japan
Monday, August 20 / 14:15~15:00, Ballroom 4 (2F)
Keynote Lecturers
17
Emerging Technologies in Mechanical Engineering
Making Bulky Sensors Much Smaller by MEMS Technology
Prof. Shuji Tanaka
Tohoku Univ., Japan
Tuesday, August 21 / 15:15~16:00, Ballroom 3 (2F)
3D Printing Commercialization Strategy
Dr. Chang Woo Lee
Korea Inst. of Machinery & Materials, Korea
Tuesday, August 21 / 15:15~16:00, Ballroom 4 (2F)
18
Time August 19 (Sun.) August 20 (Mon.) August 21 (Tue.) August 22 (Wed.)
08:00Registration
08:30
09:00
Oral Session(09:00~10:30)
Oral Session(09:00~10:30)
Oral Session(09:00~10:30)09:30
10:00
10:30Break
(10:30~10:45)Break
(10:30~10:45)Break
(10:30~10:45)
Poster Session (MoB)(10:45~11:45)
Poster Session (TuB)(10:45~11:45) Oral Session
(10:45~12:15)
11:00
11:30
Lunch(11:45~13:00)
Lunch(11:45~13:00)
12:00Poster Session (WeC)
(12:15~13:00)12:30
13:00 Opening Ceremony (13:00~13:15)Plenary Lecture 2
(13:00~14:00)
Closing Ceremony / Lottery (13:00~13:15)
Plenary Lecture 1(13:15~14:15)
13:30
Social Tour(13:30~18:00)
14:00Plenary Lecture 3
(14:00~15:00)Keynote Lectures 1~3(14:15~15:00)14:30
15:00 Break(15:00~15:30)
Break (15:00~15:15)
Keynote Lectures 4~6(15:15~16:00)15:30
Oral Session(15:30~17:00)16:00
Oral Session(16:00~17:30)16:30
RegistrationThe 5th
KSME-CMES-JSME
Joint Session(16:30~18:30)
17:00Poster Session (MoD)
(17:00~18:00)17:30 Poster Session
(TuD)(17:30~18:30)18:00
Welcome Reception
(18:00~19:30)Meeting of KSME-CMES-JSME
Key Organizing Committee (18:00~20:00)
18:30
19:00
Conference Banquet(19:00~20:30)19:30
Meeting of Local Organizing Committee
(19:30~21:00)
20:00
20:30
21:00
Program at a Glance
19
Emerging Technologies in Mechanical Engineering
Session Time Table
Session Room Ballroom 2 Ballroom 3 Ballroom 4 Mara Udo Biyang
08:00~ Registration [Lobby, 2F]
Session Manufacturing & Design 1
Fluids Engineering 1
Biomedical Engineering 1
Safety, PHM & Reliability 1
Devices for Energy Conversion 1
Biomimetic Technology
09:00~09:15 MoA1.1Surbhi Uniyal
MoA2.1Sohyun Jung
MoA3.1Nahmkeon Hur
MoA4.1Wei Wang
MoA5.1Devendra Singh Bisht
MoA6.1Seongmin Kang
09:15~09:30 MoA1.2Pattaramon Jongpradist
MoA2.2Ilhoon Jang
MoA3.2Hong Seok Park
MoA4.2Tao Sun
MoA5.2Hwang Hun Jeong
MoA6.2HyungKwan Chang
09:30~09:45 MoA1.3Tsuyoshi Toeda
MoA2.3Mahdi Nili Ahmadabadi
MoA3.3Yong Jae Kim
MoA4.3Wisal Kamal
MoA5.3Jaewon Ahn
MoA6.3Han Bi Jeong
09:45~10:00 MoA1.4Hoon Lim
MoA2.4Naoya Oshida
MoA3.4Md Siddik Alom
MoA4.4Luke Park
MoA5.4Young-Cheol Kim
MoA6.4Sang Moon Kim
10:00~10:15 MoA1.5Hye-Min Cha
MoA2.5Muhammad Salman
Abbasi
MoA3.5Suyeong Seo
MoA4.5Kwang-Hee Im
MoA5.5Mojiz Abbas Trimzi
MoA6.5Sunho Park
10:15~10:30 MoA1.6Hyungki Kim
MoA2.6Jungtaek Kim
MoA3.6Sungyeun Yang / / MoA6.6
Hoon Yi
10:30~10:45 Break
10:45~11:45 Poster Session (MoB) [Lobby, 2F]
11:45~13:00 Lunch [Black Stones & Tammora,1F]
13:00~13:15 Opening Ceremony [Ballroom 1, 2F]
13:15~14:15Plenary Lecture 1 [Ballroom 1, 2F]
"Algorithm-based Automated Synthesis of Linkage Mechanisms"Prof. Yoon Young Kim (Seoul Nat’l Univ.)
14:15~15:00
Keynote Lecture 1Prof. Shan-Tung Tu(East China Univ. of
Science and Technology)
Keynote Lecture 2Prof. Changhoon Lee
(Yonsei Univ.)
Keynote Lecture 3Prof. Shinji Deguchi
(Osaka Univ.)
15:00~15:30 Break
Session Manufacturing & Design 2
Fluids Engineering 2
Biomedical Engineering 2
Safety, PHM & Reliability 2
Devices for Energy Conversion 2
Smart Machines & Sensors
15:30~15:45 MoC1.1Selvarani Perumal
MoC2.1Hyunseung Lee
MoC3.1Tohru Yamashita
MoC4.1Zhang Hongli
MoC5.1Yanggon Kim
MoC6.1Cheol Hoon Park
15:45~16:00 MoC1.2Vu Van Quang
MoC2.2Young Min Park
MoC3.2Ali Turab Jafry
MoC4.2Yuri Yun
MoC5.2Dong-Wook Kwak
MoC6.2Hyo Seung Han
16:00~16:15 MoC1.3Imad Obaid Al-Fahad
MoC2.3Joon-Ho Kim
MoC3.3Hiroyuki Saito
MoC4.3Yang Ge
MoC5.3Hyunse Kim
MoC6.3Joon-Oh Shin
16:15~16:30 MoC1.4Su-Jin Lee
MoC2.4Ehsan Adeeb
MoC3.4Seongjin Park
MoC4.4Dawn An
MoC5.4Kee-Bong Choi
MoC6.4Subodh Barthwal
16:30~16:45 MoC1.5Hyo-seo Kwak
MoC2.5Jihyuk Kim
MoC3.5Chanryeol Rhyou
MoC4.5Liu Junjun
MoC5.5So-Nam Yun
MoC6.5Hiroki Kaneda
16:45~17:00 MoC1.6Pilgong Choi
MoC2.6Xiao-lei Hu / MoC4.6
Dong-Won Jang / MoC6.6Yuya Kubokawa
17:00~18:00 Poster Session (MoD) [Lobby, 2F]
18:00~20:00 General Meeting of KSME-CMES-JSME Key Organizing Committee
August 20 (Mon.)
Oral Session
20
Session Room Ballroom 2 Ballroom 3 Ballroom 4 Mara Udo Biyang Chuja
08:00~ Registration [Lobby, 2F]
Session Manufacturing & Design 3
Fluids Engineering 3
Nanomanufacturing & Applications
Safety, PHM & Reliability 3 AI Applications Thermal
Engineering 1
09:00~09:15 TuA1.1Sung-won Youn
TuA2.1Xin Li
TuA3.1Seokmin Kim
TuA4.1ZhiPing Zhao
TuA5.1Akilesh Sivaswamy
TuA6.1Vinh Tung Le
09:15~09:30 TuA1.2Yuvaraj N.
TuA2.2Birhan Abebaw
Negash
TuA3.2Daesuk Kim
TuA4.2Wang Chao
TuA5.2Yash Soni
TuA6.2Kim Choon Ng
09:30~09:45 TuA1.3Rohit Sharma
TuA2.3Yunyoung Choi
TuA3.3Geehong Kim
TuA4.3Minsun Cho
TuA5.3Jing-Fung Lin
TuA6.3Kwon Yong Shin
09:45~10:00 TuA1.4Byeongyoon Moon
TuA2.4Hyunsik Kim
TuA3.4Sungsu Park
TuA4.4Seung-Wook Baek
TuA5.4Gabriel Ascanio
TuA6.4Won-Hee Park
10:00~10:15 TuA1.5Sungwook Kang
TuA2.5Ujjwal Shrestha
TuA3.5Sung-Jei Hong
TuA4.5Bruno R. Mose
TuA5.5Maher Dhahri
TuA6.5Seung Jin Oh
10:15~10:30 / TuA2.6Younghwan Lee / TuA4.6
Tron Van TranTuA5.6
Pedram LorzadehTuA6.6
Shan-Tung Tu
10:30~10:45 Break
10:45~11:45 Poster Session (TuB) [Lobby, 2F]
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~14:00Plenary Lecture 2 [Ballroom 1, 2F]
"Intelligent Manufacturing in Chinese Industry"Prof. Li Peigen, Huazhong Univ. of Science and Technology, China
14:00~15:00Plenary Lecture 3 [Ballroom 1, 2F]
"Trends of R&D of Robot Technology and Its Societal Dissemination in Japan"Prof. Hajime Asama, The Univ. of Tokyo, Japan
15:00~15:15 Break
15:15~16:00
Keynote Lecture 4Prof. Ming Chen
(Tongji Univ.)
Keynote Lecture 5Prof. Shuji Tanaka
(Tohoku Univ.)
Keynote Lecture 6Dr. Chang Woo Lee
(Korea Inst. of Machinery & Materials)
Session Manufacturing & Design 4
Micro/Nano Systems 3D Printing Energy 1 Robotics Thermal
Engineering 2
16:00~16:15 TuC1.1Cui Sha-hua
TuC2.1Hoon Kim
TuC3.1Yeongjun Kim
TuC4.1Ho-Un Jeong
TuC5.1Hyunsoo Yang
TuC6.1Hwan Suk Lim
16:15~16:30 TuC1.2Shijian Yuan
TuC2.2Fakhre Alam Khan
TuC3.2Sivachidambaram
Pichumani
TuC4.2Sungha Baek
TuC5.2Keijun Kusumoto
TuC6.2Teuku Azuar Rizal
16:30~16:45 TuC1.3Shobhna Mishra
TuC2.3Raja Rajeswari N.
TuC3.3Kyung-Jung Hwang
TuC4.3Seokhwan Lee
TuC5.3Haedo Cho
TuC6.3Razali Thaib
The 5th KSME-CMES-
JSME Joint Session
16:45~17:00 TuC1.4Seok Soon Lee
TuC2.4Jungchul Lee
TuC3.4Venkatraman R.
TuC4.4Youngmin Woo
TuC5.4Hosun Lee
TuC6.4Jae Hyun Baek
17:00~17:15 TuC1.5Yeong-ho Kim
TuC2.5Junsuk Lee
TuC3.5Jinsu Kim
TuC4.5Truc Huu Nguyen
TuC5.5Tao Wang
TuC6.5MinGyu Ham
17:15~17:30 / TuC2.6Yongdae Kim / / TuC5.6
Bum-Jun LeeTuC6.6
Geun Sik Lee
17:30~18:30 Poster Session (TuD) [Lobby, 2F]
19:00~20:30 Conference Banquet [Ballroom, 2F]
August 21 (Tue.)
21
Emerging Technologies in Mechanical Engineering
Session Room Ballroom 2 Ballroom 3 Ballroom 4 Mara Udo Biyang Chuja
08:00~ Registration [Lobby, 2F]
Session Manufacturing & Design 3
Fluids Engineering 3
Nanomanufacturing & Applications
Safety, PHM & Reliability 3 AI Applications Thermal
Engineering 1
09:00~09:15 TuA1.1Sung-won Youn
TuA2.1Xin Li
TuA3.1Seokmin Kim
TuA4.1ZhiPing Zhao
TuA5.1Akilesh Sivaswamy
TuA6.1Vinh Tung Le
09:15~09:30 TuA1.2Yuvaraj N.
TuA2.2Birhan Abebaw
Negash
TuA3.2Daesuk Kim
TuA4.2Wang Chao
TuA5.2Yash Soni
TuA6.2Kim Choon Ng
09:30~09:45 TuA1.3Rohit Sharma
TuA2.3Yunyoung Choi
TuA3.3Geehong Kim
TuA4.3Minsun Cho
TuA5.3Jing-Fung Lin
TuA6.3Kwon Yong Shin
09:45~10:00 TuA1.4Byeongyoon Moon
TuA2.4Hyunsik Kim
TuA3.4Sungsu Park
TuA4.4Seung-Wook Baek
TuA5.4Gabriel Ascanio
TuA6.4Won-Hee Park
10:00~10:15 TuA1.5Sungwook Kang
TuA2.5Ujjwal Shrestha
TuA3.5Sung-Jei Hong
TuA4.5Bruno R. Mose
TuA5.5Maher Dhahri
TuA6.5Seung Jin Oh
10:15~10:30 / TuA2.6Younghwan Lee / TuA4.6
Tron Van TranTuA5.6
Pedram LorzadehTuA6.6
Shan-Tung Tu
10:30~10:45 Break
10:45~11:45 Poster Session (TuB) [Lobby, 2F]
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~14:00Plenary Lecture 2 [Ballroom 1, 2F]
"Intelligent Manufacturing in Chinese Industry"Prof. Li Peigen, Huazhong Univ. of Science and Technology, China
14:00~15:00Plenary Lecture 3 [Ballroom 1, 2F]
"Trends of R&D of Robot Technology and Its Societal Dissemination in Japan"Prof. Hajime Asama, The Univ. of Tokyo, Japan
15:00~15:15 Break
15:15~16:00
Keynote Lecture 4Prof. Ming Chen
(Tongji Univ.)
Keynote Lecture 5Prof. Shuji Tanaka
(Tohoku Univ.)
Keynote Lecture 6Dr. Chang Woo Lee
(Korea Inst. of Machinery & Materials)
Session Manufacturing & Design 4
Micro/Nano Systems 3D Printing Energy 1 Robotics Thermal
Engineering 2
16:00~16:15 TuC1.1Cui Sha-hua
TuC2.1Hoon Kim
TuC3.1Yeongjun Kim
TuC4.1Ho-Un Jeong
TuC5.1Hyunsoo Yang
TuC6.1Hwan Suk Lim
16:15~16:30 TuC1.2Shijian Yuan
TuC2.2Fakhre Alam Khan
TuC3.2Sivachidambaram
Pichumani
TuC4.2Sungha Baek
TuC5.2Keijun Kusumoto
TuC6.2Teuku Azuar Rizal
16:30~16:45 TuC1.3Shobhna Mishra
TuC2.3Raja Rajeswari N.
TuC3.3Kyung-Jung Hwang
TuC4.3Seokhwan Lee
TuC5.3Haedo Cho
TuC6.3Razali Thaib
The 5th KSME-CMES-
JSME Joint Session
16:45~17:00 TuC1.4Seok Soon Lee
TuC2.4Jungchul Lee
TuC3.4Venkatraman R.
TuC4.4Youngmin Woo
TuC5.4Hosun Lee
TuC6.4Jae Hyun Baek
17:00~17:15 TuC1.5Yeong-ho Kim
TuC2.5Junsuk Lee
TuC3.5Jinsu Kim
TuC4.5Truc Huu Nguyen
TuC5.5Tao Wang
TuC6.5MinGyu Ham
17:15~17:30 / TuC2.6Yongdae Kim / / TuC5.6
Bum-Jun LeeTuC6.6
Geun Sik Lee
17:30~18:30 Poster Session (TuD) [Lobby, 2F]
19:00~20:30 Conference Banquet [Ballroom, 2F]
August 22 (Wed.)
Session Room Ballroom 2 Ballroom 3 Ballroom 4 Mara Udo Biyang
08:00~ Registration [Lobby, 2F]
SessionEngineering Materials 1
IT Applications Metamaterials Energy 2Dynamics &
Control 1Thermal
Engineering 3
09:00~09:15WeA1.1
Siti Ujila MasuriWeA2.1
Dong Hwan KimWeA3.1
Kyoungsik KimWeA4.1
Hung Viet LeWeA5.1
Mounir MeloussiWeA6.1
Atsushi Tsujimori
09:15~09:30WeA1.2
Byunghyun KangWeA2.2
Moohyun ChaWeA3.2
Do-Nyun KimWeA4.2
Su Won KimWeA5.2
Jin Hyun JangWeA6.2
Nasruddin A. Abdullah
09:30~09:45WeA1.3
Liu JunjunWeA2.3
Bong Sub SongWeA3.3
Joo Hwan OhWeA4.3
Hossein NeishabouriWeA5.3
Hyeob ChoiWeA6.3
G. M. Lionus Leo
09:45~10:00WeA1.4
Joong Yeon LimWeA2.4Jin Jang
WeA3.4Hyuk Lee
WeA4.4Hyunho Ha
WeA5.4Kyuhyun Sim
WeA6.4Alagappan Narayanan
10:00~10:15WeA1.5
Parthipan N.
WeA2.5Dhiren Ramanbhai
Patel
WeA3.5Joon-soo Lim
WeA4.5Samsul Rizal
WeA5.5Myounggyu Noh
WeA6.5Hongwone Choi
10:15~10:30WeA1.6
Kyoung Joon Choi/ / /
WeA5.6Ravindra S. Birajdar
/
10:30~10:45 Break
SessionEngineering Materials 2
CAE & Computational Studies
Transportation & Education
Energy 3Dynamics &
Control 2Thermal
Engineering 4
10:45~11:00WeB1.1
Rohit SharmaWeB2.1
Feng ChenWeB3.1
Yeong Jo JuWeB4.1
Suhaeng HeoWeB5.1
Adil Naseer KhawajaWeB6.1
ShinKwan Kim
11:00~11:15WeB1.2
Nohjun MyungWeB2.2
Ilyoup SohnWeB3.2
Byeong Hee YangWeB4.2
Minho BangWeB5.2
Baek Ju SungWeB6.2
Hyung Gyu Park
11:15~11:30WeB1.3
Jungmin NohWeB2.3
Saekyeol KimWeB3.3
Jae-Hun KimWeB4.3
Anh Ngoc VuWeB5.3
Beom-Jun KangWeB6.3
Iwan Setyawan
11:30~11:45WeB1.4
Shinseong KangWeB2.4
Min-Geun KimWeB3.4
Adil Naseer KhawajaWeB4.4
Van-Tien GiapWeB5.4
Junjie Huang
WeB6.4Syed Safeer Mehdi
Shamsi
11:45~12:00WeB1.5
Quoc Thien PhamWeB2.5
Sunyoung ImWeB3.5
Dong Joo SongWeB4.5
Ali AkbarWeB5.5
Liang XuanWeB6.5
Wei Ting Hsu
12:00~12:15WeB1.6
Hung-Kuk OhWeB2.6
Hyeok LeeWeB3.6
Hahyeon JoWeB4.6
Jeoungsu Na/ /
12:15~13:00 Poster Session (WeC) [Lobby, 2F]
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1, 2F]
13:30~18:00 Social Tour
22
August 20 (Mon.)
Poster Session (MoB)
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
10:45~11:45
1 MoB.01Seunggyu Kim 17 MoB.17
Jongman Kim 33 MoB.33 Kyung-Wuk Kim 49 MoB.49
Prashant Pendyala
2 MoB.02 Han-Wool Kim 18 MoB.18
Do Yeon Lee 34 MoB.34 Pankwon Kim 50 MoB.50
Youngdo Jung
3 MoB.03 Taehee Yoon 19 MoB.19
Seung-Yop Lee 35 MoB.35 Taeho Kim 51 MoB.51
Daun Kim
4 MoB.04 Yun Seok Heo 20 MoB.20
Binh Thanh Nguyen 36 MoB.36 Yoon-Hwan Kim 52 MoB.52
Jihoon Lee
5 MoB.05 Jeesoo Lee 21 MoB.21
Seonggi Kim 37 MoB.37 Dongkyu Lee 53 MoB.53
Minsu Kim
6 MoB.06 Junmoo Kim 22 MoB.22
Kyoung-Soub Lee 38 MoB.38 Minseok Kim 54 MoB.54
Bong Su Kang
7 MoB.07 Giup Seo 23 MoB.23
Seong Gyu Lee 39 MoB.39 Yoon Hyuk Kim 55 MoB.55
Sungho Lee
8 MoB.08 Jaejin Kim 24 MoB.24
Joon-yeong Kim 40 MoB.40Donghwan Hwang 56 MoB.56
Chan Kyu Lee
9 MoB.09Su Yeon Lee 25 MoB.25
Yusung Kim 41 MoB.41 Soonmo Cho 57 MoB.57
Seongmin Kang
10 MoB.10 Joonho Seo 26 MoB.26
Seungbin Park 42 MoB.42 Han-Byeol Oh 58 MoB.58
Taemin Lee
11 MoB.11 EunKyung Bae 27 MoB.27
Uikyu Chae 43 MoB.43 Jiwhan Noh 59 MoB.59
Minho Seong
12 MoB.12 Si-Myung Park 28 MoB.28
Yong Sang Cho 44 MoB.44 Kahyun Sun 60 MoB.60
Hangil Ko
13 MoB.13 Kyung-tae Lee 29 MoB.29
Seong-Eun Kim 45 MoB.45 Insol Hwang 61 MoB.61
Yong-jai Park
14 MoB.14 Kirok Kwon 30 MoB.30
Anna Go 46 MoB.46 Hyun-Ha Park
15 MoB.15 Sang-Eun Park 31 MoB.31
Zhenglin Li 47 MoB.47 Seung-Chul Park
16 MoB.16 Seongjung Kim 32 MoB.32
Hun Jin Jeong 48 MoB.48 Changwook Seol
Poster Session
23
Emerging Technologies in Mechanical Engineering
Poster Session (MoD)
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
17:00~18:00
1 MoD.01 Minhee Kim 17 MoD.17
Hyunseob Lee 33 MoD.33 Youngsu Noh 49 MoD.49
Changyu Kim
2 MoD.02 Minhee Kim 18 MoD.18
Dong Hwan Kim 34 MoD.34 Jaemin Eom 50 MoD.50
Wae Gyeong Shin
3 MoD.03 Do Young Lee 19 MoD.19
Seongwook Cho 35 MoD.35 Sung-Cheol Jang 51 MoD.51
Byeung-Cheol An
4 MoD.04 Ji Young Yoon 20 MoD.20
Byoungik Choi 36 MoD.36 Jung-Ho Park 52 MoD.52
Woong-Bae Kim
5 MoD.05 Munkyoung Choi 21 MoD.21
Seongheum Han 37 MoD.37 Hunseok Lee 53 MoD.53
Keon Hee Baek
6 MoD.06 Viet Luyen Vu 22 MoD.22
Jeong-Jung Kim 38 MoD.38 Junpil Park 54 MoD.54
Sungcheol Park
7 MoD.07 Ming Guo 23 MoD.23
Cheonji Lee 39 MoD.39 Hong Bo Dinh 55 MoD.55
Bongkuk Son
8 MoD.08 Jun-Ho Jeon 24 MoD.24
Jinseong Park 40 MoD.40 Younghoon Kong 56 MoD.56
Chan IL Park
9 MoD.09 Yeonghyeon Gim 25 MoD.25
Kang-Ho Lee 41 MoD.41 Sungho Choi 57 MoD.57
Se-Bu Oh
10 MoD.10 Sun Min Kim 26 MoD.26
Wonseop Kim 42 MoD.42 Seongin Moon 58 MoD.58
SeungWoo Lee
11 MoD.11 Chan Jin Park 27 MoD.27
Bohee Maeng 43 MoD.43 Taesoon Kim 59 MoD.59
Xiao Xiao
12 MoD.12 Hun Sik Han 28 MoD.28
Duck-Gyu Lee 44 MoD.44 To Kang 60 MoD.60
Jaekyung Kim
13 MoD.13 Kuendong Ha 29 MoD.29
Junghoon Park 45 MoD.45 Young-Sam Ham 61 MoD.61
Beom Gyun Jeong
14 MoD.14 Yeon-Won Lee 30 MoD.30
Jong Hyeon Park 46 MoD.46 Jungmoo Han 62 MoD.62
Seung Sik Shin
15 MoD.15 Sooyoung Chang 31 MoD.31
Yoonsuk Kim 47 MoD.47 Wan-Kyu Choi 63 MoD.63
Kwang Joon Kim
16 MoD.16 Tae-Woo Kim 32 MoD.32
Hanjin Jo 48 MoD.48 Youngsu Ko
24
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
10:45~11:45
1 TuB.01Chang-Yong Kim 17 TuB.17
Taemin Kim 33 TuB.33Bum Joon Kim 49 TuB.49
Soongeun Kwon
2 TuB.02Hyung Mo Bae 18 TuB.18
Ho Yeon Lee 34 TuB.34Young-Loul Kim 50 TuB.50
Hyungjun Lim
3 TuB.03Donghwi Lee 19 TuB.19
Sangho Sohn 35 TuB.35Dongil Shin 51 TuB.51
Seungjo Lee
4 TuB.04Seungyeong Choi 20 TuB.20
ChunLoon Cha 36 TuB.36Junmo Kim 52 TuB.52
Dong Kyo Oh
5 TuB.05Hwankuk Kim 21 TuB.21
Sung-Ho Lee 37 TuB.37CheongHwan Lee 53 TuB.53
MoonChul Yoon
6 TuB.06Jeong-Heon Shin 22 TuB.22
Dongoh Lee 38 TuB.38Euimin Cheong 54 TuB.54
Kangpyo Lee
7 TuB.07Seungho Han 23 TuB.23
Myung-whan Bae 39 TuB.39UnBong Baek 55 TuB.55
Hun Bong Lim
8 TuB.08Da Min Shim 24 TuB.24
Byonghu Sohn 40 TuB.40Woo-Gon Kim 56 TuB.56
Hun Bong Lim
9 TuB.09Youngbae Han 25 TuB.25
Sung-Woo Ha 41 TuB.41JeongHwan Lee 57 TuB.57
Hun Bong Lim
10 TuB.10Tae-hyun Chang 26 TuB.26
Jungchul Kim 42 TuB.42Hieu Hong Le 58 TuB.58
Hyun Woo Kim
11 TuB.11Honggun Kim 27 TuB.27
Dae-Wan Kim 43 TuB.43Daeil Kwon 59 TuB.59
Min Sook Yu
12 TuB.12Munseok Choe 28 TuB.28
Qasim Sarwar Khan 44 TuB.44Heeseong Kim 60 TuB.60
Wan-Sik Woo
13 TuB.13Inmyong Park 29 TuB.29
Jong Dae Kim 45 TuB.45Younghun Lee 61 TuB.61
Sungho Choi
14 TuB.14Sungchun Choi 30 TuB.30
ChanYong Jung 46 TuB.46Yong-Su Kwon 62 TuB.62
Kyu-Taek Han
15 TuB.15Heungsu Kim 31 TuB.31
Sabir Hossain 47 TuB.47Taeksu Lee
16 TuB.16Chun-Loon Cha 32 TuB.32
Hyeonseok You 48 TuB.48Ji Min Seok
August 21 (Tue.)
Poster Session (TuB)
25
Emerging Technologies in Mechanical Engineering
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
10:45~11:45
1 TuB.01Chang-Yong Kim 17 TuB.17
Taemin Kim 33 TuB.33Bum Joon Kim 49 TuB.49
Soongeun Kwon
2 TuB.02Hyung Mo Bae 18 TuB.18
Ho Yeon Lee 34 TuB.34Young-Loul Kim 50 TuB.50
Hyungjun Lim
3 TuB.03Donghwi Lee 19 TuB.19
Sangho Sohn 35 TuB.35Dongil Shin 51 TuB.51
Seungjo Lee
4 TuB.04Seungyeong Choi 20 TuB.20
ChunLoon Cha 36 TuB.36Junmo Kim 52 TuB.52
Dong Kyo Oh
5 TuB.05Hwankuk Kim 21 TuB.21
Sung-Ho Lee 37 TuB.37CheongHwan Lee 53 TuB.53
MoonChul Yoon
6 TuB.06Jeong-Heon Shin 22 TuB.22
Dongoh Lee 38 TuB.38Euimin Cheong 54 TuB.54
Kangpyo Lee
7 TuB.07Seungho Han 23 TuB.23
Myung-whan Bae 39 TuB.39UnBong Baek 55 TuB.55
Hun Bong Lim
8 TuB.08Da Min Shim 24 TuB.24
Byonghu Sohn 40 TuB.40Woo-Gon Kim 56 TuB.56
Hun Bong Lim
9 TuB.09Youngbae Han 25 TuB.25
Sung-Woo Ha 41 TuB.41JeongHwan Lee 57 TuB.57
Hun Bong Lim
10 TuB.10Tae-hyun Chang 26 TuB.26
Jungchul Kim 42 TuB.42Hieu Hong Le 58 TuB.58
Hyun Woo Kim
11 TuB.11Honggun Kim 27 TuB.27
Dae-Wan Kim 43 TuB.43Daeil Kwon 59 TuB.59
Min Sook Yu
12 TuB.12Munseok Choe 28 TuB.28
Qasim Sarwar Khan 44 TuB.44Heeseong Kim 60 TuB.60
Wan-Sik Woo
13 TuB.13Inmyong Park 29 TuB.29
Jong Dae Kim 45 TuB.45Younghun Lee 61 TuB.61
Sungho Choi
14 TuB.14Sungchun Choi 30 TuB.30
ChanYong Jung 46 TuB.46Yong-Su Kwon 62 TuB.62
Kyu-Taek Han
15 TuB.15Heungsu Kim 31 TuB.31
Sabir Hossain 47 TuB.47Taeksu Lee
16 TuB.16Chun-Loon Cha 32 TuB.32
Hyeonseok You 48 TuB.48Ji Min Seok
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
17:30~18:30
1 TuD.01Il-Je Cho 17 TuD.17
Kuk-Hyun Ahn 33 TuD.33Jini Hyeon 49 TuD.49
Namyun Kim
2 TuD.02HyunAh Lee 18 TuD.18
Jaesung Kwon 34 TuD.34Soo Won Kwon 50 TuD.50
Sungchan Yun
3 TuD.03Joong Yong Yi 19 TuD.19
Jung Ryeol Hong 35 TuD.35Jinwook Jeong 51 TuD.51
Woochul Kim
4 TuD.04Daehae Kim 20 TuD.20
Seong-yeol Yoo 36 TuD.36Hyeon Soo Lim 52 TuD.52
Agha Aamir
5 TuD.05Seungho Ahn 21 TuD.21
Cheonghwa Lee 37 TuD.37Seobin Eom 53 TuD.53
Wonsuk Jung
6 TuD.06Sung Soo Shin 22 TuD.22
Baek Gyu Choi 38 TuD.38Jaekeun Yoon 54 TuD.54
Young Su Kim
7 TuD.07JeongJu Kim 23 TuD.23
Kiho Kim 39 TuD.39Jong Hyeok Jeon 55 TuD.55
Junjie Yu
8 TuD.08Sehjin Park 24 TuD.24
Jaeuk Cho 40 TuD.40Seon Woong Koo 56 TuD.56
Yewon Jung
9 TuD.09In Seok Lee 25 TuD.25
Young-Jae Kim 41 TuD.41Myeong Hee Jeong 57 TuD.57
Hae Jeong Kim
10 TuD.10Jiwoo Choi 26 TuD.26
Seohang Lee 42 TuD.42Wooyeong Lim 58 TuD.58
Yong Suk Yang
11 TuD.11Heetae Yoon 27 TuD.27
Seungyeol Lee 43 TuD.43Yuan-Wu Jiang 59 TuD.59
Ji Eun Lee
12 TuD.12Duk-gam Woo 28 TuD.28
Jeongick Lee 44 TuD.44Yuan-Wu Jiang 60 TuD.60
Jaecheol Yun
13 TuD.13Duk Gam Woo 29 TuD.29
Jaemin Yoon 45 TuD.45Nae-Un Kang 61 TuD.61
Hongguen Park
14 TuD.14Sung-Hoon Jung 30 TuD.30
SeungJun Lee 46 TuD.46Woojin Oh 62
TuD.62Emmanuel
Kokloku
15 TuD.15Kyeong-Ho Shin 31 TuD.31
HyeWon Lee 47 TuD.47Yeosang Yoon 63 TuD.63
MinHa Kim
16 TuD.16Seung-Nam Yu 32 TuD.32
TaeJun Song 48 TuD.48Seonggeun Han 64
TuD.64Gwang-Wook
Hong
Poster Session (TuD)
26
Time Panel No. Paper No. Panel
No. Paper No. Panel No. Paper No. Panel
No. Paper No.
08:00~ Registration (2nd Floor)
12:15~13:00
1 WeC.01Da-Mi Yu 17 WeC.17
Hyungwoo Lee 33 WeC.33Minsoo Kim 49 WeC.49
Jeongnam Kim
2 WeC.02Sun Hong Yoon 18 WeC.18
SungHyun Bae 34 WeC.34Kwanoh Kim 50
WeC.50Umarov
Rakhmatjon
3 WeC.03Keebeom Park 19 WeC.19
Hyeonguk Mun 35 WeC.35Seung-Yoon On 51 WeC.51
Chang Hwan Yang
4 WeC.04Inhak Lee 20 WeC.20
Hee Rok Hong 36 WeC.36Young Choi 52 WeC.52
Taeho Kim
5 WeC.05Jeongseok Kim 21 WeC.21
Soonhwan Hwang 37 WeC.37Sangheon Park 53 WeC.53
TaeSick An
6 WeC.06Jung Woo Kim 22 WeC.22
Hyun-Woong Kim 38 WeC.38Donghyun Yoon 54 WeC.54
Seokbae Lee
7 WeC.07Hyung-Kweon Kim 23 WeC.23
Haeseong Kang 39 WeC.39Jae-Hoon Kim 55 WeC.55
Seung-Hun Lee
8 WeC.08Youngjin Kwon 24 WeC.24
Young Chan Jung 40 WeC.40Sanghyun Hong 56 WeC.56
Heonyoung Kim
9 WeC.09Jaesu Han 25 WeC.25
Sunil Moon 41 WeC.41Byung-Wook Jeon 57 WeC.57
Dong-Seok Shin
10 WeC.10Seong Chan Jun 26 WeC.26
Sang Hun Sul 42WeC.42
NguyenThi Phuong
58 WeC.58Minkyung Kim
11 WeC.11Byeongyoon Moon 27 WeC.27
Ju-hyun Jeon 43WeC.43
Karuppasamy Pandian
Marimuthu59 WeC.59
Wonhee You
12 WeC.12Jaeoh Han 28 WeC.28
Hu Seung Lee 44 WeC.44Min Soo Kang 60 WeC.60
Chul-Su Kim
13 WeC.13Joonsoo Jun 29 WeC.29
Yongjune Kim 45 WeC.45Kyungheum Park 61 WeC.61
Kwangseok Oh
14 WeC.14Sungwoo Chang 30
WeC.30Joshua Minwoo
Kweun46 WeC.46
Chi-Hwan Kim 62 WeC.62HyunWook Lee
15 WeC.15Chanho Park 31 WeC.31
Jin Woo Lee 47 WeC.47Ho-Young Lee 63 WeC.63
Jae-Hee Jang
16 WeC.16Been-hui Lee 32
WeC.32Fekadu Tolessa
Maremi48 WeC.48
Youngcheol Jeong 64 WeC.64Byung Jin Cho
August 22 (Wed.)
Poster Session (WeC)
27
Emerging Technologies in Mechanical Engineering
Technical Program
Oral Session
August 20 (Mon.)
Ballroom 1
13:00~13:15 OpeningCeremony
13:15~14:15 PlenaryLecture1 Chair:Prof.WangDecheng(ChinaAcademyofMachinerySciences)
13:15~14:15 [PL0001]Algorithm-basedAutomatedSynthesisofLinkageMechanisms/YoonYoungKim(SeoulNat’lUniv.)/87
Ballroom 2
09:00~10:30 Manufacturing&Design1 Chairs:Prof.Soo-HongLee(YonseiUniv.),Dr.TsuyoshiToeda(FujiElectricCo.,Ltd.)
09:00~09:15 [MoA1.1]EvaluatingChallengesinSuccessfulImplementationofSustainableConsumptionandProductionUsingISM-MICMACAnalysis/SurbhiUniyal(GraphicEraUniv.),SachinKumarMangla(Univ.ofPlymouth),PravinP.Patil(GraphicEraUniv.)/101
09:15~09:30 [MoA1.2] Lightweight Bus Body Design and Optimization for RolloverCrashworthiness / Pattaramon Jongpradist, Suphanut Kongwat (KingMongkut’sUniv.ofTechnologyThonburi)/ 102
09:30~09:45 [MoA1.3]FlexibleBusinessandManufacturing (FBM)Model -EmergingMechanism that Describe the Industrial Business Structure by JEMA - /TsuyoshiToeda(FujiElectricCo.,Ltd.),ToruIshikuma(AzbilCorporation),IchiroTakahashi(TheJapanElectricalManufactures’Association)/103
09:45~10:00 [MoA1.4]Technology and International StandardizationTrend of SmartFactory / Hoon Lim, Jong KooYoon (Korea Construction Equipment
28
TechnologyInst.)/ 10410:00~10:15 [MoA1.5]DevelopmentofthePipeDefectManagementSystemUsingDeep
Learning/Hye-MinCha,Mi-KyeongShin,Woo-JinJo,Soo-HongLee(YonseiUniv.)/105
10:15~10:30 [MoA1.6]ShapeSimilarity-basedCatalogRetrievaltoSupport3DModelingUsingPointCloudinaPlant3DCADSystem/HyungkiKim(KoreaInst.ofMachinery&Materials),ChangmoYeo(KyungpookNat’lUniv.),MoohyunCha(KoreaInst.ofMachinery&Materials),DuhwanMun(KyungpookNat’lUniv.)/106
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
14:15~15:00 KeynoteLecture1 Chair:Prof.ChanIlPark(Gangneung-WonjuNat’lUniv.)
14:15~15:00 [KN0001]FromReliabilityDesigntoReliabilityManufacture/Shan-TungTu,Xian-ChengZhang(EastChinaUniv.ofScienceandTechnology)/ 93
15:00~15:30 Break
15:30~17:00 Manufacturing&Design2 Chair:Prof.ChulKim(PusanNat’lUniv.)
15:30~15:45 [MoC1.1]PerformanceofColdCoolantforMachiningof Inconel718UsingCarbideCuttingTool/SelvaraniPerumal(GovernmentPolytechnicCollege),SenthilkumaarJayalakshmiSellappan,Arun Illangovan,ThamizhmaniiS.(MadanapalleInst.ofTechnologyandScience)/107
15:45~16:00 [MoC1.2]OptimizationofCuttingModeParameterstoEnhanceEfficiencyinProfileGrindingforInnerRingGrooveofBallBearings/VuToanThang(HanoiUniv.ofScienceandTechnology),NguyenAnhTuan(Univ.ofEconomicandTechnicalIndustries),VuVanQuang(HanoiUniv.ofScienceandTechnology)/ 108
16:00~16:15 [MoC1.3]StudyofCorrosionEffectsontheMixed-modeFracturePropertiesofSteelPlates/ImadObaidAl-Fahad(Univ.ofBasra)/ 109
29
Emerging Technologies in Mechanical Engineering
16:15~16:30 [MoC1.4]OnBasicStudyofLaserDirectJoiningforCFRPandMetalsUsingHighPowerDiodeLaser/Su-JinLee,Kwang-DukChoi,Eun-JoonChun, In-sungChoi,JeongSuh(KoreaInst.ofMachinery&Materials)/ 110
16:30~16:45 [MoC1.5]DevelopmentoftheIntegratedSystem(D.D.I.,FilamentWindingandCuringProcesses)forManufacturingtheHighPressureVessel(TypeII)/Hyo-seoKwak,Gun-youngPark,HanseamSeong,ChulKim(PusanNat’lUniv.)/ 111
16:45~17:00 [MoC1.6]SynchronizationControlofaHigh-speedLineScannerforMetalPBF3DPrintingProcess/PilgongChoi,DongsigShin(KoreaInst.ofMachinery&Materials),BongkukSon(ChungnamNat’lUniv.),HyonkeeSohn(KoreaInst.ofMachinery&Materials)/ 112
Ballroom 3
09:00~10:30 FluidsEngineering1 Chairs: Prof. Simon Song (Hanyang Univ.),
Prof. Fumihito Kato (Nippon Inst. of Techology)
09:00~09:15 [MoA2.1]DynamicsofCorrosiveImbibitioninPorousMedia/SohyunJung(SeoulNat’lUniv.),WonjungKim(SogangUniv.),Ho-YoungKim(SeoulNat’lUniv.)/ 113
09:15~09:30 [MoA2.2]NovelPaper-basedViscometerUtilizingColorimetricAnalysiswithSmartphone/IlhoonJang,HyunwoongKang,SimonSong(HanyangUniv.)/ 114
09:30~09:45 [MoA2.3]ExperimentalParametricStudyofaRectangularCross-junctionResonatorTube for Developing a Novel Energy Harvesting Device withVelocity Measuring Potential / Mohammad Hasan Karimi, Mahdi NiliAhmadabadi(IsfahanUniv.ofTechnology)/ 115
09:45~10:00 [MoA2.4]ElectromagneticDriveMicropumpHavingThrustBallBearingwithMagneticFluidSeal forBiomedicalApplications/NaoyaOshida,NoriyasuMasumoto,FumihitoKato,ZhangXiaoyou(NipponInst.ofTechnology)/ 116
10:00~10:15 [MoA2.5]MultimodalBreak-upofDoubleEmulsionDroplet/MuhammadSalmanAbbasi,RyungeunSong (SungkyunkwanUniv.),HyoungsooKim(KoreaAdvancedInst.ofScienceandTechnology),JinkeeLee(SungkyunkwanUniv.)/ 117
10:15~10:30 [MoA2.6]EvaporationofMicroscaleCapillaryFlowsinanOpenRectangularChannel/JungtaekKim,Ho-YoungKim(SeoulNat’lUniv.)/ 118
10:30~10:45 Break
30
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
14:15~15:00 KeynoteLecture2 Chair:Prof.HaecheonChoi(SeoulNat’lUniv.)
14:15~15:00 [KN0002]NumericalStudyofParticle-ladenTurbulence/ChanghoonLee(YonseiUniv.)/ 94
15:00~15:30 Break
15:30~17:00 FluidsEngineering2 Chair:Dr.Xiao-leiHu(AnhuiUniv.ofTechnology)
15:30~15:45 [MoC2.1]Level-setbasedNumericalSimulationofFilmCondensation inaMicrochannel/HyunseungLee,GihunSon(SogangUniv.)/ 119
15:45~16:00 [MoC2.2]StudyofRealFluidEffectsonLaminarCounterflowDiffusionFlame/YoungMinPark,BokJikLee(GwangjuInst.ofScienceandTechnology)/ 120
16:00~16:15 [MoC2.3]VentilationPerformanceofMethaneandPropaneReleasedintheFuelGasSupplySystemRoomofaGas-fueledVessel/Joon-HoKim,Deog-HeeDoh(KoreaMaritimeandOceanUniv.),ByungChulChoi(KoreanRegisterofShipping)/ 121
16:15~16:30 [MoC2.4]AGPU Implementationof IB-LBMtoStudytheEffectofCornerRadius as well as Downstream Cylinder Incident Angle in StaggeredArrangement:ANumerical Investigation/EhsanAdeeb,ChangHyunSohn(KyungpookNat’lUniv.)/ 122
16:30~16:45 [MoC2.5]PerformanceImprovementofDoubleSerpentineDiffuserbyGerlachShaping/JihyukKim,Ji-YeolBae,HyungMoBae,HeeokEom,SooyoungNoh,HyungHeeCho(YonseiUniv.)/ 123
16:45~17:00 [MoC2.6]Numerical Investigationof theAnnularChamber InfluenceontheGas-ejectionLoad/Xiao-leiHu,JiayiGuo(AnhuiUniv.ofTechnology),NenggangXie,TaoLiu,SunChuanbin(AnhuiUniv.ofScienceandTechnology)/ 124
31
Emerging Technologies in Mechanical Engineering
Ballroom 4
09:00~10:30 BiomedicalEngineering1 Chair:Prof.HyungsukLee(YonseiUniv.)
09:00~09:15 [MoA3.1]ANewMethodofPredictingHemolysisinaBloodPump/NahmkeonHur,SinwhaChoi,SungwonKang,WonjungKim(SogangUniv.)/ 125
09:15~09:30 [MoA3.2]DevelopmentofaLifeScienceEngineeringSystemforProliferatingStemCells/HongSeokPark,SaurabhKumar,BowenQi,NguyenDinhSon(Univ.ofUlsan)/ 126
09:30~09:45 [MoA3.3]Effectof InSituSynthesizedAuNanoparticlesonExtractionofPhotosyntheticElectronsfromThylakoidMembranes/YongJaeKim,JaehyoungYun,SeonilKim,HyeonaugHong,WonhyoungRyu(YonseiUniv.)/ 127
09:45~10:00 [MoA3.4] A Bifunctional Monomer ProducesTough Hydrogel AfterCopolymerization/MdSiddikAlom,VanTronTran,MdTarifulislamMredha,SurajK.Pathak,InsuJeon(ChonnamNat’lUniv.)/ 128
10:00~10:15 [MoA3.5]3DHumanBlood-brainBarrieronaChip/SuyeongSeo,HwieunKim(KoreaInst.ofScienceandTechnology),Seung-YeolNah(KonkukUniv.),Hyewhon Rhim (Korea Inst. of Science andTechnology), Kangwon Lee(SeoulNat’lUniv.),NakwonChoi,Hong-NamKim(KoreaInst.ofScienceandTechnology)/ 129
10:15~10:30 [MoA3.6]PEONanofiberPatterningbyNear-fieldElectrospinningforHighlyAlignedMyoblastGrowth/IlHoSeo,JihongMin,SungyeunYang,WongunKoh,WonhyoungRyu(YonseiUniv.)/ 130
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
14:15~15:00 KeynoteLecture3 Chair:Prof.YoonHyukKim(Kyung-HeeUniv.)
14:15~15:00 [KN0003]High-throughputDetectionofCellularTractionForcesforScreeningofDrugsandRegulatoryGenes/ShinjiDeguchi(OsakaUniv.)/ 95
15:00~15:30 Break
32
15:30~16:45 BiomedicalEngineering2 Chair:Prof.YunSeokHeo(KeimyungUniv.)
15:30~15:45 [MoC3.1] The Effect of POCS Method and Smooth Processing forReconstruction in Ultrasonic CT /TohruYamashita, Kaoru Furushima(KumamotoCollege)/ 131
15:45~16:00 [MoC3.2]MultilayeredElectrohydrodynamicJetPrintingofTwo-dimensionalElectrode Array in Paper-based Digital Microfluidics / AliTurab Jafry,HyungdongLee,AyodyaPradhiptaTenggara,HosubLim,YoungkwangMoon,YongwooLee,DoyoungByun,JinkeeLee(SungkyunkwanUniv.)/ 132
16:00~16:15 [MoC3.3]PerformanceinSterilizationoftheUVSterilizerforIndwellingUrethralCathetersLeftinPlace/HiroyukiSaito(HirosakiUniv.)/ 133
16:15~16:30 [MoC3.4]ComputationalModelingofCollagenFibersinCancerMicroenvironmentUsingDelaunayTriangulation/SeongjinPark,SeongjinLim,JessieSungyunJeon(KoreaAdvancedInst.ofScienceandTechnology)/ 134
16:30~16:45 [MoC3.5]OptimalRatefortheContinuousPhaseModulation inStandingSurfaceAcousticWaves /ChanryeolRhyou,SehyunPark,HyungsukLee(YonseiUniv.)/ 135
Mara Room
09:00~10:15 Safety,PHM&Reliability1 Chairs:Prof.Kwang-HeeIm(WoosukUniv.),Prof.TaoSun(ShanghaiUniv.)
09:00~09:15 [MoA4.1] Dynamics of a High-voltage Switchgear System Excited byEarthquake/TaoSun,WeiWang(ShanghaiUniv.)/ 136
09:15~09:30 [MoA4.2] Modeling and Simulation of Electric Field on a HighVoltageSwitchgear/TaoSun,LingLi(ShanghaiUniv.)/ 137
09:30~09:45 [MoA4.3]ForcedResponseofRotatingBladesbyBlade-Tip-Timing(BTT)/WisalKamal,HongHeeYoo(HanyangUniv.)/ 138
09:45~10:00 [MoA4.4]CompressorBladeDigitalTwinSysteminGasTurbineEngine/LukePark(DoosanHeavyIndustriesandConstruction),InGulKim(ChungnamNat’lUniv.)/ 139
10:00~10:15 [MoA4.5]NDECharacterizationandDetectionTechniquesofAluminumWiresofHoneycombSandwichCompositePanelsUsingTerahertzWaves/Kwang-HeeIm(WoosukUniv.),Sun-KyuKim(ChonbukNat’lUniv.),Jong-AnJung(SongwonUniv.),Young-TaeCho(JeonjuUniv.),Yong-DeuckWoo(WoosukUniv.)/ 140
33
Emerging Technologies in Mechanical Engineering
10:15~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
15:00~15:30 Break
15:30~17:00 Safety,PHM&Reliability2 Chair:Dr.Seung-WookBaek(KoreaResearchInst.ofStandardsandScience)
15:30~15:45 [MoC4.1]EquipmentAbnormalityDegreeDetectionUsingWeightOptimizingPotentialFieldDetectors/ZhangHongli,RenZhongyuan,LiuShulin,XuDanping,JiaoWenhui(ShanghaiUniv.)/ 141
15:45~16:00 [MoC4.2]DataDrivenAircraftEngineHealthManagementUsingCMAPSSData/YuriYun,JoohoChoi(KoreaAerospaceUniv.)/ 142
16:00~16:15 [MoC4.3]RemainingUsefulLifePredictionofRotatingMachinerybasedonK-SDistanceandLSTM/YangGe,XiaomeiJiang,YanDou(ChangshuInst.ofTechnology)/ 143
16:15~16:30 [MoC4.4] Novel Approach for Remaining Useful Life Prediction basedon Accelerated LifeTesting Model / Dawn An (Korea Inst. of IndustrialTechnology)/ 144
16:30~16:45 [MoC4.5]ResearchofElevatorHydraulicControlSystembasedonRatioPressure-flowCompoundValve/LiuJunjun,ManZengguang,ZhongJiawei,LiuZhong(ChangshuInst.ofTechnology)/ 145
16:45~17:00 [MoC4.6]DevelopmentofAlgorithmtoTrackCenterofGravityofCraneVehicleandtoPreventRolloverUsingMachineLearning/Dong-WonJang,Dong-CheonBaek,Jong-WonPark(KoreaInst.ofMachinery&Materials)/ 146
Udo Room
09:00~10:15 DevicesforEnergyConversion1 Chair:Dr.So-NamYun(KoreaInst.ofMachinery&Materials)
09:00~09:15 [MoA5.1]StudyandAnalysisofParametersofPassiveModularDaylightingSystem/DevendraSinghBisht,HarryGarg,ShravanaKumarR.R.,VinodKarar(CSIR-CentralScientificInstrumentsOrganisation)/ 147
09:15~09:30 [MoA5.2]ADesignofSlidingModeControllerwithSmithPredictoronElectro
34
HydrostaticDrivenTravelMotor/HwangHunJeong(KoreaConstructionEquipmentTechnology Inst.), So NamYun (Korea Inst. of Machinery& Materials), IllYeong Lee (Pukyong Nat’l Univ.), Jong IlYoon (KoreaConstructionEquipmentTechnologyInst.)/ 148
09:30~09:45 [MoA5.3]Analysisof ImpactHeaderforBetterActionControlling/JaewonAhn,DongwonYun,MyongjinKim,Do-YoungKim(DaeguGyeongbukInst.ofScience&Technology)/ 149
09:45~10:00 [MoA5.4]TestofaVibrationEnergyHarvesterforSmartTireMonitoringSensorModule/JonghoSeo,HanminLee,Young-CheolKim(KoreaInst.ofMachinery&Materials)/ 150
10:00~10:15 [MoA5.5]MathematicalModelingandSimulationof0.2mlJet InjectionbyMechanicalImpulseofPiezoelectricActuator/MojizAbbasTrimzi,YoungbogHam(KoreaInst.ofMachinery&Materials/Univ.ofScience&Technology),ByeungcheolAn(Univ.ofScience&Technology),JunghoPark,SonamYun(KoreaInst.ofMachinery&Materials)/ 151
10:15~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
15:00~15:30 Break
15:30~16:45 DevicesforEnergyConversion2 Chair:Dr.So-NamYun(KoreaInst.ofMachinery&Materials)
15:30~15:45 [MoC5.1]EffectofanExhaustGasRecirculationSystemCombinedwithaTurbochargerCut-outSystemonVibrationCharacteristicsofaPropulsionShafting System and an Energy Efficiency Design Index of New Ships /Yanggon Kim (Korean Register), Go Ryoung Park (Sewol InvestigationCommission),MoonSeekLee(WartsilaKorea),KwonHaeCho,UeKanKim(KoreaMaritimeandOceanUniv.)/ 152
15:45~16:00 [MoC5.2]StudyonAnalysisofElectrical&PhysicalSignalCharacteristicsofHollowTypePiezoelectricActuator forNoiseElimination/Dong-WookKwak(ChungnamNat’lUniv.),Jung-HoPark,Sung-MookChoi(KoreaInst.ofMachinery&Materials),Jae-MinKim,Hu-SeungLee(ChungnamNat’lUniv.)/ 153
35
Emerging Technologies in Mechanical Engineering
16:00~16:15 [MoC5.3]DesignandFabricationofa30kHzUltrasonicWaveguideforCoolingApplicationsUsingFiniteElementMethods/HyunseKim,EuisuLim,YanglaeLee(KoreaInst.ofMachinery&Materials)/ 154
16:15~16:30 [MoC5.4]MathematicalModelingofaPiezo-drivenFlexureDevice/Kee-BongChoi,JaeJongLee,GeehongKim,HyungjunLim,SoongeunKwon(KoreaInst.ofMachinery&Materials),SangchulLee(KoreaBasicScienceInst.)/ 155
16:30~16:45 [MoC5.5]DynamicCharacteristicsofElectro-hydraulicProportionalPressureReducingValvefor IndependentMeteringValve/So-NamYun,YoungbogHam,JunghoPark(KoreaInst.ofMachinery&Materials),MoongonKim(SFHyworld,Korea)/ 156
Biyang Room
09:00~10:30 BiomimeticTechnology Chair:Prof.HoonEuiJeong(UlsanNat’lInst.ofScienceandTechnology)
09:00~09:15 [MoA6.1]Moth-eye-inspiredMultifunctionalPolymerPad/SeongminKang(ChungnamNat’lUniv.)/ 157
09:15~09:30 [MoA6.2]All-solid-stateElectricallyTunablePhotonicCrystals forFlexibleCamouflagingSkins/HyungKwanChang,JungyulPark(SogangUniv.)/ 158
09:30~09:45 [MoA6.3]FishingSpiderInspiredModelofDrag-dominatedWaterJumpers/HanBiJeong(SeoulNat’lUniv.),EunjinYang(Korea Inst.ofScienceandTechnologyEvaluationofPlanning),YunsukJeung(SeoulNat’lUniv.),JulietteAmauger(EcoleNormaleSuperieure),Ho-YoungKim(SeoulNat’lUniv.)/ 159
09:45~10:00 [MoA6.4] Guided Cracking of Electrodes by Stretching Prism-patternedMembraneElectrodeAssemblies forHigh-performanceFuelCells /SangMoonKim,ChangwookSeol(IncheonNat’lUniv.),Chi-YeongAhn(SeoulNat’lUniv.),SegeunJang(KoreaInst.ofScienceandTechnology),Yong-HunCho(KangwonNat’lUniv.),JiwooChoi,SungjunKim,Yung-EunSung,MansooChoi(SeoulNat’lUniv.)/ 160
10:00~10:15 [MoA6.5]SuspendedGrapheneNanopatternsforEngineeringStructureandFunctionofStemCells/SunhoPark,DaunKim,DohyeonLee,WoochanKim,JanghoKim(ChonnamNat’lUniv.)/ 161
10:15~10:30 [MoA6.6]Wet-responsiveMultifunctionalHydrogelAdhesive forTransferPrinting/HoonYi,MinhoSeong,KahyunSun, InsolHwang,MinSuKang,HyunwookKo,HoonEuiJeong(UlsanNat’lInst.ofScienceandTechnology)/ 162
10:30~10:45 Break
36
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
13:00~13:15 Opening Ceremony [Ballroom 1]
15:00~15:30 Break
15:30~17:00 SmartMachines&Sensors Chairs:Dr.SangGyuChoi(KoreaInst.ofMachinery&Materials),
Prof.JungKim(KoreaAdvancedInst.ofScienceandTechnology)
15:30~15:45 [MoC6.1]ExperimentofHighPrecisionSmartRollerSupportedbyMagneticBearings/CheolHoonPark(KoreaInst.ofMachinery&Materials),CheolHan,JihunAhn(MagnetarInc.)/ 163
15:45~16:00 [MoC6.2] A Soft Insole Sensor System Using Artificial Neural NetworkModeling forMeasurementofGroundReactionForce/HyoSeungHan,SanghyunHwang,JuyoungYoon,DongjinHyun(HyundaiMotorCompany)/ 164
16:00~16:15 [MoC6.3]AScanning3DSensorandItsObjectRecognitionforAutonomousRobot/Joon-OhShin, In-GyuJang,Dae-HeePark,Yong-HwaPark (KoreaAdvancedInst.ofScienceandTechnology)/ 165
16:15~16:30 [MoC6.4]CarbonNanotubeCoatedZincOxideNanocompositeasaPesticideSensor/SubodhBarthwal (ShardaUniv./AmityUniv.),BhimSingh(AmityUniv.),NakshatraBahadurSingh(ShardaUniv.)/ 166
16:30~16:45 [MoC6.5] Measurement of Adhered Oil FilmThickness Using UltrasonicTechnique/HirokiKaneda,AkitoshiTakeuchi(KochiUniv.ofTechnology)/ 167
16:45~17:00 [MoC6.6]EstimationofOilFilmRuptureRationUsingUltrasonicTecnique/YuyaKubokawa,AkitoshiTakeuchi(KochiUniv.ofTechnology)/ 168
37
Emerging Technologies in Mechanical Engineering
August 21 (Tue.)
Ballroom 1
13:00~14:00 PlenaryLecture2 Chair:Prof.YujiNakasone(TokyoUniv.ofScience)
13:00~14:00 [PL0002]IntelligentManufacturinginChineseIndustry/LiPeigen(HuazhongUniv.ofScienceandTechnology)/ 88
14:00~15:00 PlenaryLecture3 Chair:Prof.Jae-BokSong(KoreaUniv.)
14:00~15:00 [PL0003]TrendsofR&DofRobotTechnologyandItsSocietalDisseminationinJapan/HajimeAsama(TheUniv.ofTokyo)/ 89
19:00~20:30 Conference Banquet [Ballroom]
Ballroom 2
09:00~10:15 Manufacturing&Design3 Chairs:Dr.SungwookKang(KoreaInst.ofIndustrialTechnology),
Dr.Sung-wonYoun(Nat’lInst.ofAIST)
09:00~09:15 [TuA1.1]FabricationofHighAspectRatioMicropatterns inSolubleBlock-copolymerPolyimidebyUV-assistedThermal ImprintProcess/Sung-wonYoun,KentaSuzuki,TakagiHideki,HiroshiHiroshima(Nat‘l Inst.ofAIST),YoshinoriKinoshita,KatsuhiroHayashi(RiverEletecCorporation)/ 169
09:15~09:30 [TuA1.2]Preliminary InvestigationonSS304SurfacePatternbyAbrasiveWaterJetPolishingTechniqueforSurgicalInstruments/YuvarajN.(VelTechRangarajanDr.SagunthalaR&DInst.ofScienceandTechnology),SagasthiranSalaiK.,UdayakumarA.S.M.(St.Joseph’sCollegeofEngineering),LeninrajS.(AnnaUniv.),HlochS.(TechnicalUniv.ofKosice)/ 170
09:30~09:45 [TuA1.3]Ultra-precisionDiamondTurningofTitaniumAlloyforBiomedicalApplications/VinodMishra,RohitSharma(CSIR-CentralScientificInstrumentsOrganisation),GauravLuthra(AuxeinMedicals),HarryGarg,VinodKarar(CSIR-CentralScientificInstrumentsOrganisation)/ 171
38
09:45~10:00 [TuA1.4]AStudyonVibrationReductionofCast IronFrameTypeMotorConsideringPreloadofBallBearing,BoltConnectionandThermalEffectofRotor/ByeongyoonMoon,HyunyongPark(HyundaiElectricCo.,Ltd.),DaeseongCho(PusanNat’lUniv.)/ 172
10:00~10:15 [TuA1.5] OverlayWelding Analysis for the Least Distortion ConsideringWeldingSequenceandCoolingWaterEffect/SungwookKang,JaewoongKim(KoreaInst.ofIndustrialTechnology)/ 173
10:15~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
15:00~15:15 Break
15:15~16:00 KeynoteLecture4 Chair:Dr.JaeJongLee(KoreaInst.ofMachinery&Materials)
15:15~16:00 [KN0004]ANewGenerationofIntelligentManufacturingandCorrespondingTalentCultivation/MingChen(TongjiUniv.)/ 96
16:00~17:15 Manufacturing&Design4 Chair:Prof.SeokSoonLee(GyeongsangNat’lUniv.)
16:00~16:15 [TuC1.1]BasedontheTheoryofTRIZSolvingtheProblemof21700Lithium-ionBatteryCupricEarWelding/CuiShao-hua,MeiJiang-ping(TianjinUniv.),FangLiang(TianjinLishenBatteryJoint-StockCompany)/ 174
16:15~16:30 [TuC1.2]Double-sidedPressureSheetHydroformingofLargeCurvedShellswithAluminumAlloyTailoredBlank/WeiLiu,YongchaoXu,ShijianYuan(HarbinInst.ofTechnology)/ 175
16:30~16:45 [ TuC1.3] Performance Enhancement of ElectromagneticWelding byCrowbarringTechnique / Shobhna Mishra, Jmvv S. Aravind, Renu Rani,SurenderKumarSharma,EkanshMishra,RishiVerma,NitinD.Waghmare,ArchanaSharma(BhabhaAtomicResearchCentre.)/ 176
16:45~17:00 [TuC1.4]ElectromagneticFormingwithInductionHeatingProcessingTechnology/SeokSoonLee,SeungminTak,HanbinKang(GyeongsangNat’lUniv.)/ 177
17:00~17:15 [ TuC1.5] Implementation ofVisionTechnique forTorsionalVibrationMeasurement/Yeong-hoKim(KoreanRegisterofShipping),Yeong-hwanKim,Ue-KanKim,Deog-HeeDoh(KoreaMaritimeandOceanUniv.)/ 178
39
Emerging Technologies in Mechanical Engineering
19:00~20:30 Conference Banquet [Ballroom]
Ballroom 3
09:00~10:30 FluidsEngineering3 Chair:Prof.XinLi(ZhejiangUniv.)
09:00~09:15 [TuA2.1]ForceCharacteristicsandTwo-dimensionalPressureFieldsofAirFlotationUnitswithDifferentNumbersofOrifices/XinLi,XuboYu(ZhejiangUniv.),ChengyeZou(Univ.ofHongKong),KaigeShi(ZhejiangUniv.)/ 179
09:15~09:30 [TuA2.2]ModelingDynamicBehaviourofMagnetorheologicalDamperbyGeneticAlgorithm/BirhanAbebawNegash(KoreaRailroadResearchInst./Univ.ofScienceandTechnology),WonheeYou,GwansupLee(KoreaRailroadResearchInst.)/ 180
09:30~09:45 [TuA2.3]OptimalFlowBatteryDesignbasedonEvolutionaryAlgorithm/YunyoungChoi,SeongyoonKim,Jung-IlChoi(YonseiUniv.)/ 181
09:45~10:00 [TuA2.4]ControlofFlowoveraCircularCylinderwithaSplitterPlateatHighReynoldsNumber/HyunsikKim,HaecheonChoi(SeoulNat’lUniv.)/ 182
10:00~10:15 [TuA2.5]OptimizationofCasingandJ-GroovetoSuppressUnsteadyFlowintheFrancisHydroTurbine/UjjwalShrestha,ZhenmuChen,YoungDoChoi(MokpoNat’lUniv.)/ 183
10:15~10:30 [TuA2.6]NumericalStudyontheEffectofThroatShapeforaFlushIntake/YounghwanLee,SukYoungJung(AgencyforDefenseDevelopment)/ 184
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
15:00~15:15 Break
15:15~16:00 KeynoteLecture5 Chair:Dr.Eui-SungYoon(KoreaInst.ofScienceandTechnology)
15:15~16:00 [KN0005]MakingBulkySensorsMuchSmallerbyMEMSTechnology/ShujiTanaka(TohokuUniv.)/ 97
40
16:00~17:30 Micro/NanoSystems Chair:Prof.YongdaeKim(KyungilUniv.)
16:00~16:15 [TuC2.1]Reduction inPhononGroupVelocity inNanofilms /HoonKim,MehmetEminKilic,AloysiusSoon,WoochulKim(YonseiUniv.)/ 185
16:15~16:30 [TuC2.2]VariableStiffnessGrapheneOxideStressSensorsforRobotGrippers/FakhreAlamKhan,C.MuhammedAjmal,SeonghyunBae,SungwonSeo,HyungpilMoon,SeunghyunBaik(SungkyunkwanUniv.)/ 186
16:30~16:45 [TuC2.3] Analytical and Numerical Modeling of Microfluidic Flow intoMicroneedleforTransdermalDrugDelivery/RajaRajeswariN.,PraveenKumarS.,GnanavelB.K.(SaveethaEngineeringCollege)/ 187
16:45~17:00 [TuC2.4] Polymeric Atomic Force Microscope Cantilevers Fabricated inElastomericMoldsviaUltravioletCuring/JungchulLee,YeowonYoon,BoraLee,JuheeKo(SogangUniv.)/ 188
17:00~17:15 [TuC2.5]DevelopmentofMOFEmbeddedFilterStructureforTrappingIndoorVolatileOrganicCompounds/JunsukLee,JanghyeonLee,Si-HyungLim(KookminUniv.)/ 189
17:15~17:30 [TuC2.6] Experimental Study on Metallization for Nano/Micro DevicesOperatedinPhysicalContactMode/YongdaeKim(KyungilUniv.)/ 190
19:00~20:30 Conference Banquet [Ballroom]
Ballroom 4
09:00~10:15 Nanomanufacturing&Applications Chairs:Dr.JaeJongLee(KoreaInst.ofMachinery&Materials),
Prof.SungSuPark(SungkyunkwanUniv.)
09:00~09:15 [TuA3.1]FabricationofHighPowerLaserStableGlassNanoimprintedSurface-enhancedRamanSpectroscopySubstrate/MohsinAliBadshah,JonghyunJu,SeokminKim(Chung-AngUniv.)/ 191
09:15~09:30 [TuA3.2] High-sensitive RealTime Spectral Polarization MeasurementTechnique / Daesuk Kim,Vamara Dembele, Inho Choi, Sukhyun Choi(ChonbukNat’lUniv.)/ 192
09:30~09:45 [TuA3.3]LargeAreaMicro-nanoHybridPatterningUsingFemtosecondLaserDirectlaser-writing/GeehongKim,HyungjunLim,KeebongChoi,SoongeunKwon,JaejongLee(KoreaInst.ofMachinery&Materials)/ 193
09:45~10:00 [TuA3.4]TumoroidandOrganoidon3DMicrofluidicCellCultureChipforBiomedicalAapplications/SungsuPark,WanyoungLim,YujungLee,Myeong
41
Emerging Technologies in Mechanical Engineering
HyeonYoon(SungkyunkwanUniv.)/ 19410:00~10:15 [TuA3.5]IndiumTinOxideNanoparticles(ITO-NPs)/SilverNanowires(AgNWs)
HybridStructuralThinFilmsforTransparentWearableElectronics/Sung-JeiHong(KoreaElectronicsTechnologyInst.)/ 195
10:15~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]
15:00~15:15 Break
15:15~16:00 KeynoteLecture6 Chair:Prof.Heon-SulJeong(KunsanNat’lUniv.)
15:15~16:00 [KN0006]3DPrintingCommercializationStrategy/ChangWooLee(KoreaInst.ofMachinery&Materials)/ 98
16:00~17:15 3DPrinting Chair:Dr.JiHoonYu(KoreaInst.ofMaterialsScience)
16:00~16:15 [TuC3.1]FabricationofPressureSensorwithElectrospunPoly(Vinylidenefluoride-co-trifluoroethylene) /Yeongjun Kim (Hanyang Univ.), Junhee Lee(Korea Inst.ofMachinery&Materials), JeHoonOh(HanyangUniv.)/ 196
16:15~16:30 [TuC3.2]PerformanceEvaluationofanAirFoilFabricatedthroughAdditiveManufacturingUsingSimulationandExperimentalTechniques/KrishnaM.,RaghavS.,RaghuramanS.,SivachidambaramPichumani(SASTRADeemedUniv.)/ 197
16:30~16:45 [TuC3.3] Improving Suspension Bush Durability Utilizing 3D PrintingTechnology/Kyung-JungHwang,Yong-HyunRyu,Dae-UnSung(HyundaiMotorResearchCenter)/ 198
16:45~17:00 [TuC3.4]AReviewofAdditiveManufacturing -Techniques,Trends,andChallengesinModernManufacturingScenario/RajMohanR.,VenkatramanR.,RaghuramanS.(SASTRADeemedUniv.)/ 199
17:00~17:15 [ TuC3.5] Lightweight Design of a Door-trim Jig throughTopologyOptimizationforAdditiveManufacturing/JinsuKim, InGwunJang(KoreaAdvancedInst.ofScienceandTechnology)/ 200
19:00~20:30 Conference Banquet [Ballroom]
42
Mara Room
09:00~10:30 Safety,PHM&Reliability3 Chair:Prof.Dong-KilShin(YeungnamUniv.)
09:00~09:15 [TuA4.1]EffectsofRemeltingonFatigueWearPerformanceofCoating/ZhiPingZhao,XinyongLi(ChangshuInst.ofTechnology)/ 201
09:15~09:30 [TuA4.2]NumericalAnalysisofFailureCriteriaforDouble-glazedPVModules/WangChao(ChangshuInst.ofTechnology),NiYangdong(CanadianSolarInc.),ZhengYubin(DalianUniv.ofTechnology)/ 202
09:30~09:45 [TuA4.3] Improving Defect Healing in Graphene by Enhanced SelectiveElectrochemicalDeposition/MinsunCho,SuminKang,Taek-SooKim(KoreaAdvancedInst.ofScienceandTechnology)/ 203
09:45~10:00 [TuA4.4]CorrosionofMetallicMaterialforHydrogenService/Seung-WookBaek(KoreaResearchInst.ofStandardsandScience),JungHyunKim(HanbatNat’lUniv.),UnBongBaek(KoreaResearchInst.ofStandardsandScience),MyeongsikJeong(KoreaInst.ofIndustrialTechnology),Min-SooSuh(KoreaInst.ofEnergyResearch),BoSikKang(KoreaInst.ofMachinery&Materials)/ 204
10:00~10:15 [TuA4.5]MeasurementofInterfacialAdhesionofFilmTypeAdhesiveinaHighHumidityEnvironment/BrunoR.Mose,In-JunJung,JaeYoungJang,Dong-KilShin(YeungnamUniv.)/ 205
10:15~10:30 [TuA4.6]Stiff,StrongandStretchablePhysicalHydrogelswithHighWaterContent/TronVanTran,SurajK.Pathak,InsuJeon(ChonnamNat’lUniv.)/ 206
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]15:00~15:15 Break
16:00~17:15 Energy1 Chair:Dr.SeokhwanLee(KoreaInst.ofMachinery&Materials)
16:00~16:15 [TuC4.1]ControlStrategytoMinimizePowerTransmissionLossofParallelTypeHybridElectricVehicle/Ho-UnJeong,Jae-HoonHan,Sung-HoHwang(SungkyunkwanUniv.)/ 207
16:15~16:30 [TuC4.2]EffectsofGasoline-ethanolBlendsonCombustionandParticleEmissionsCharacteristicsfromaSparkIgnitionDirectInjection(SIDI)Engine
43
Emerging Technologies in Mechanical Engineering
/SunghaBaek,JaehoCho,Cha-LeeMyung,SimsooPark(KoreaUniv.)/ 20816:30~16:45 [TuC4.3]Experimental Investigation intotheEffectof InertGas(Nitrogen,
Carbondioxides)AdditionontheDiesel-triggeredDual-fuelCombustionwithNaturalGasinaHeavy-dutyCIEngine/ JeongwooLee,SunyoupLee,ChanggiKim,SeokhwanLee(KoreaInst.ofMachinery&Materials)/ 209
16:45~17:00 [TuC4.4]DevelopmentofaHeatInputDeviceforaFreePistonStirlingEnginefromtheWastedExhaustGasofDieselGensets/YoungminWoo,JinyoungJang,DaeHunChung,JaejoonChoi(KoreaInst.ofEnergyResearch,Korea)/ 210
17:00~17:15 [TuC4.5]ANumericalStudyonNOxFormationBehaviorsinaLean-premixedGasTurbineCombustorUsingCFD-CRNMethod/TrucHuuNguyen,Jung-KyuPark(KonkukUniv.),Seung-ChaiJung,ShaunKim(HanwhaTechwinR&DCenter)/ 211
19:00~20:30 Conference Banquet [Ballroom]
Udo Room
09:00~10:30 AIApplications Chair:Prof.Jing-FungLin(FarEastUniv.Taiwan)
09:00~09:15 [TuA5.1]ComparingSpeechClassificationofRussianDigits0-9byHMMandNeuralNetworkModels/AkileshSivaswamy,EvgeniyPavlovskiy(NovosibirskStateUniv.)/ 212
09:15~09:30 [TuA5.2]ANovel3DScanningAlgorithmCombinedwithUpcomingNewRapidPrototypingFilesforBetterReliabilityoftheAdditiveManufacturedProduct /Yash Soni, Narendra Kumar, Prashant K. Jain (Indian Inst. ofInformationTechnology,DesignandManufacturing)/ 213
09:30~09:45 [TuA5.3]ArtificialNeuralNetworkModelofRetardance inCitrateCoatedFerrofluidsUsingResilientPropagationAlgorithm/Jing-FungLin,Yan-YuYang(FarEastUniv.)/ 214
09:45~10:00 [TuA5.4]CycloidalTransmissionswithMagneticGears/RicardoChicurel,OmarTenorio,GabrielAscanio(Nat’lAutonompusUniv.ofMexico)/ 215
10:00~10:15 [TuA5.5]Near-wallandTurbulenceModelingofPlaneTurbulentWallJets/MaherDhahri(HigherInst.ofAgriculturalSciencesofChottMariem),HanaAouinet(Univ.ofTunisElManar)/ 216
10:15~10:30 [TuA5.6]UsingFiniteElementMothodinCalculationofStressConcentrationFactor around a Elliptical Hole in Composite Hybrid Lamina / PedramLorzadeh,PezhmanTaghipourBirgani(IslamicAzadUniv.)/ 217
44
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]15:00~15:15 Break
16:00~17:30 Robotics Chair:Prof.FumihitoKato(NipponInst.ofTechnology)
16:00~16:15 [TuC5.1]PreliminaryResultsonModelingandControlofMultipleAerial-groundManipulatorSystemwithLoadFlexibility/HyunsooYang(SeoulNat’lUniv.),NicolasStaub,AntonioFranchi(Lab.forAnalysisandArchitectureofSystems),DongjunLee(SeoulNat’lUniv.)/ 218
16:15~16:30 [TuC5.2]FundamentalStudyonImprovementofGraspingPerformanceofElectricProstheticHandbyMulti-jointThumbStructure/KeijunKusumoto,NoriyasuMasumoto,FumihitoKato(NipponInst.ofTechnology)/ 219
16:30~16:45 [TuC5.3]AnkleKinematicsEstimationbyUsingSoftCapacitiveStretchSensors/HaedoCho,SeunghunLee,SangjoonJ.Kim,JungKim(KoreaAdvancedInst.ofScienceandTechnology)/ 220
16:45~17:00 [TuC5.4]WeightedMobilityIndexbasedHybridControlSchemeforEffectiveDrivingofCMG-RobobikeunderUnknownTrackConditions/HosunLee(KwangwoonUniv.),NakYoungChong(JapanAdvancedInst.ofScienceandTechnology),WoosungYang(KwangwoonUniv.)/ 221
17:00~17:15 [TuC5.5] Cascade Control with Gain Scheduling for Fluidic-driven SoftManipulator/TaoWang,YunceZhang(ZhejiangUniv.)/ 222
17:15~17:30 [TuC5.6]SLAMwithIteratedExtendedKalmanFilteronSE(2)/Bum-JunLee,HyungpilMoon(SungkyunkwanUniv.)/ 223
19:00~20:30 Conference Banquet [Ballroom]
Biyang Room
09:00~10:30 ThermalEngineering1 Chair:Prof.GeunSikLee(Univ.ofUlsan)
09:00~09:15 [TuA6.1]InvestigationofThermalContactResistanceofSuper-alloyThermalProtectionSystem/VinhTungLe,NamSeoGoo(KonkukUniv.),JaeYoungKim(AgencyofDefenseDevelopment)/ 224
45
Emerging Technologies in Mechanical Engineering
09:15~09:30 [TuA6.2]TheFallacyofEnergyEfficiencyforSeawaterDesalinationProcessesforSustainableDevelopment/KimChoonNg,MuhammadWakilShahzad,MuhammadBurhan(KingAbdullahUniv.ofScienceandTechnology)/ 225
09:30~09:45 [TuA6.3]ThermalSinteringofInkjet-printedSilverPatternsbyaHeatedGasFlow/KwonYongShin,SanghoLee,KyungtaeKang(KoreaInst.ofIndustrialTechnology)/ 226
09:45~10:00 [TuA6.4]OptimizationofFire-relatedPropertiesinLayeredStructures/Won-HeePark(KoreaRailroadResearchInst.)/ 227
10:00~10:15 [TuA6.5]ModelingandProcessSimulationofAdvancedAdsorptionChillerIncorporating Electromagnetic-activated Desorption / Seung Jin Oh(KingAbdullahUniv.ofScienceandTechnology),MKumja(Nat’lUniv.ofSingapore),WongeeChun(JejuNat’lUniv.),KimChoonNg(KingAbdullahUniv.ofScienceandTechnology)/ 228
10:15~10:30 [TuA6.6]ThermalCharacteristicsofaTi–Cu-coatedFiberBraggGratingTemperatureSensoratCryogenicTemperatures/Ya-LiWang,YunTu,Shan-TungTu(EastChinaUniv.ofScienceandTechnology)/ 229
10:30~10:45 Break
11:45~13:00 Lunch [Black Stones & Tammora, 1F]15:00~15:15 Break
16:00~17:30 ThermalEngineering2 Chair:Prof.NamSeoGoo(KonkukUniv.)
16:00~16:15 [TuC6.1]PerformanceEnhancementofSeasonalThermalEnergyStorageSystemThroughtheInletPositionControl/HwanSukLim,SungChoi,YongTaeKang(KoreaUniv.)/ 230
16:15~16:30 [TuC6.2]UtilizationofBeeswax/BentoniteasEnergyStorageMaterialonBuildingWallComposite/HamdaniUmar,SamsulRizal,MedyanRiza(Univ.ofSyiahKuala),TeukuAzuarRizal(SamudraUniv.)/ 231
16:30~16:45 [TuC6.3]ExperimentalInvestigationofBeefTallowUtilizationasPhaseChangeMaterials forCoolingMedia inBuilding IntegratedPhotovoltaics/RazaliThaib,SamsulRizal,MedyanRiza(Univ.ofSyiahKuala)/ 232
16:45~17:00 [TuC6.4]AStudyonthePerformanceofaHybridDesiccantDehumidifierCombinedwithaHeatPumpandaDesiccantWheel/JaeHyunBaek,Yong-ChanKim(KoreaUniv.)/ 233
46
17:00~17:15 [TuC6.5]PerformanceInvestigationofaNovel IntegratedDehumidificationProcessUsingaLiquidDesiccant/MinGyuHam,WooJinJeon,Young-DeukKim(HanyangUniv.)/ 234
17:15~17:30 [TuC6.6] Enhancement ofTemperature Uniformity of Steel Pipes insidean Annealing Furnace by Adopting Modified Inlet Geometry andTheirArrangement/TuThienNgo(Univ.ofUlsan),PhuMinhNguyen(HoChiMinhCityUniv.ofTechnology),GeunSikLee(Univ.ofUlsan)/ 235
19:00~20:30 Conference Banquet [Ballroom]
Chuja Room
16:30~18:30 The5thKSME-CMES-JSMEJointSession Chair:Prof.Byoung-HoChoi(KoreaUniv.)
19:00~20:30 Conference Banquet [Ballroom]
47
Emerging Technologies in Mechanical Engineering
August 22 (Wed.)
Ballroom 2
09:00~10:30 EngineeringMaterials1 Chair:Prof.ParthipanN.(M.KumarasamyCollegeofEngineering)
09:00~09:15 [WeA1.1]SynthesisandCharacterizationofNanoCa-DTPMP,NanoSi-Zn-DTPMP,andNanoSi-Ca-DTPMPScaleInhibitors/ LingeswaranKaniappan,RadhiyatulHikmahAbu,SitiUjilaMasuri(Univ.PutraMalaysia)/ 236
09:15~09:30 [WeA1.2]QuantitativeEvaluationofScratchResistanceofPolymericMaterialsbasedonScratchWidthandEnergyRelationship/ByunghyunKang,Byoung-HoChoi(KoreaUniv.)/ 237
09:30~09:45 [WeA1.3]EffectsofPretreatmentsonPhysicochemicalPropertiesofRiceStraw/LiuJunjun,ManZengguang,GuoLanzhong(ChangshuInst.ofTechnology),Chunxia He (Nanjing Agricultural Univ.),TangWu (Changshu Inst. ofTechnology)/ 238
09:45~10:00 [WeA1.4]FabricationofCompositesUsingPolymerReinforcedbyNano-CelluloseandMultiscaleHomogenizationTechniqueUsingRepresentativeVolumeElement(RVE)/ Min-WookPark,SeulBiLa,OliviaHeuiyoungPark,JoongYeonLim(DonggukUniv.)/ 239
10:00~10:15 [WeA1.5]TribologicalandMechanicalPropertiesofAA6061ReinforcedwithSiCandGraphiteforAutomobileApplications/ParthipanN.,ManikandanA.(M.KumarasamyCollegeofEngineering),IlangkumaranM.(K.S.RangasamyCollegeofTechnology),ManickamC.(M.KumarasamyCollegeofEngineering)/ 240
10:15~10:30 [WeA1.6]TheEffectofMagneticTreatmentonWearBehaviorofAISI8620Steel / Kyoung Joon Choi (Korea Basic Science Inst.), SeungchangYoo,JunhyukHam,JihyunKim(UlsanNat’l Inst.ofScienceandTechnology),SooyeolJeong,YeonsukChoi(KoreaBasicScienceInst.)/ 241
10:30~10:45 Break
10:45~12:15 EngineeringMaterials2 Chair:Prof.Hung-KukOh(AjouUniv.)
10:45~11:00 [WeB1.1]DuctileRegimeMachiningofMicrolensArrayonGermaniumbySlowToolServo/RohitSharma,VinodMishra,HarryGarg,VinodKarar(CSIR-CSIO)/ 242
48
11:00~11:15 [WeB1.2]VeryHighCycleFatigueFailureAnalysisofShotPeenedSpringSteel/NohjunMyung,NaksamChoi(HanyangUniv.)/ 243
11:15~11:30 [WeB1.3]Multi-Patch IsogeometricAnalysisofGeometricallyExactShellsConsidering Geometric Continuities and CoordinateTransformations /JungminNoh,YounDohHa(KunsanNat’lUniv.)/ 244
11:30~11:45 [WeB1.4]ReducedBasisApproximation forRapidAnalysisofLaminatedComposites/ShinseongKang,KyunghoonLee(PusanNat’lUniv.)/ 245
11:45~12:00 [WeB1.5] Investigating the Mechanical Properties of Jujube Flesh byCompressionandImpactTests/QuocThienPham,Nai-ShangLiou(SouthernTaiwanUniv.ofScienceandTechnology)/ 246
12:00~12:15 [WeB1.6]ConventionalAtomicModelandMechanicalEngineering/Hung-KukOh(AjouUniv.)/ 247
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
Ballroom 3
09:00~10:15 ITApplications Chairs:Prof.JungHwanLee(KunsanUniv.),
Mr.DhirenRamanbhaiPatel(PanditDeendayalPetroleumUniv.)
09:00~09:15 [WeA2.1]Self-locationRecognitionSchemesand ImplementationofanIndoorFlyingQuadrotor/HunSeKim,DongHwanKim(SeoulNat’lUniv.ofScienceandTechnology)/ 248
09:15~09:30 [WeA2.2] Integrationof ImmersiveVRTechnologies forVirtualTraining,Prototyping and AutonomousVehicles / Moohyun Cha, Mingeuk Kim,Chanseok Park (Korea Inst. of Machinery & Materials), Duhwan Mun(KyungpookNat’lUniv.),EricMatson(PurdueUniv.)/ 249
09:30~09:45 [WeA2.3]NuclearSpentFuel InspectionRobotUsingImageSensor/BongSubSong(DaeguGyeongbukInst.ofScienceandTechnology),JongwonPark(KoreaAtomicEnergyResearchInst.),DongwonYun(DaeguGyeongbukInst.ofScienceandTechnology)/ 250
09:45~10:00 [WeA2.4]EvaluationofHoveringPerformanceofDronesUsingMonoVision/JinJang,Do-SikKim,Jong-WonPark(KoreaInst.ofMachinery&Materials)/ 251
10:00~10:15 [WeA2.5] An Investigation of Correlation between Surface Roughness
49
Emerging Technologies in Mechanical Engineering
Parameters and ImageTexture Features of 6082T6 Alloy Sand BlastedComponents / Dhiren Ramanbhai Patel, Kiran Bhaskar Mysore (PanditDeendayalPetroleumUniv.)/ 252
10:15~10:45 Break
10:45~12:15 CAE&ComputationalStudies Chair:Dr.IlyoupSohn(KoreaInst.ofScienceandTechnologyInformation)
10:45~11:00 [WeB2.1]TheUltimateWorkingTorqueofRotaryShoulderedConnectionsunderDifferentAxialTensionandBoreholeCurvature/FengChen,WeiZhu,NanWang,QinfengDi,WenchangWang(ShanghaiUniv.)/ 253
11:00~11:15 [WeB2.2]AComparativeAnalysisofFluidSimulationApproachforaHighSpeedScatteringFlow/IlyoupSohn(KoreaInst.ofScienceandTechnologyInformation),Sun-GyuJung,JunLee,Sang-AhLee(Paratech)/ 254
11:15~11:30 [WeB2.3] Reliability-based Design Optimization of a Pick-up Device ofManganeseNoduleMiner/SaekyeolKim(HanyangUniv.),Su-gilCho(KoreaResearchInst.ofShipsandOceanEngineering),MinukLee(VirtualMotionR&DCenter),JihoonKim,TaeHeeLee(HanyangUniv.),SanghyunPark,SupHong,Hyung-WooKim,Cheon-HongMin,Jong-SuChoi(KoreaResearchInst.ofShipsandOceanEngineering),Young-TakKo,Sang-BumChi(KoreaInst.ofOceanScience&Technology)/ 255
11:30~11:45 [WeB2.4]Multipatch IsogeometricAnalysis forGeometricallyExactShellElementsUsingNitsche’sMethod/Min-GeunKim,HanminLee,Jeong-WooHan,Geun-HoLee(KoreaInst.ofMachinery&Materials)/ 256
11:45~12:00 [WeB2.5]ANovelApproachtoReduceDynamicSubstructuresbyProperOrthogonal Decomposition Method / Sunyoung Im (Seoul Nat’l Univ.),EuiyoungKim(KoreaInst.ofMachinery&Materials),MaenghyoCho(SeoulNat’lUniv.)/ 257
12:00~12:15 [WeB2.6] Bi-stable CFRP Laminated Composites with Negative InitialCurvature/HyeokLee,JongguLee(SeoulNat’lUniv.),JunghyunRyu(KoreaAtomicEnergyResearchInst.),MaenghyoCho(SeoulNat’lUniv.)/ 258
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
50
Ballroom 4
09:00~10:15 Metamaterials Chair:Dr.YongjuneKim(CenterforAdvancedMeta-Materials)
09:00~09:15 [WeA3.1]ElasticallyAdjustableNanoporousMaterialsforOpticalDevicesandComponents/DongheokShin,ChangwookKim,KyoungsikKim(YonseiUniv.)/ 259
09:15~09:30 [WeA3.2]AuxeticMeta-tubeDesignforConcentric-tubeRobots/KwangjeLee,DongsikSeo,Do-NyunKim(SeoulNat’lUniv.)/ 260
09:30~09:45 [WeA3.3]FlexuralElasticMetamaterialforBroadbandVibrationShielding/JooHwanOh(UlsanNat’lInst.ofScienceandTechnology),BadreddineAssouar(Univ.deLorraine),YoonyoungKim(SeoulNat’lUniv.)/ 261
09:45~10:00 [WeA3.4]Fully-transmissiveElasticPlanarMetasurface:AnomalousWavefrontControlwithinSubwavelengthScale/HyukLee,JunKyuLee(SeoulNat’lUniv.),HongMinSeung(KoreaResearchInst.ofStandardsandScience),YoonYoungKim(SeoulNat’lUniv.)/ 262
10:00~10:15 [WeA3.5]MultipleDiameterPatternsofMetalDielectricMetalStructureforBroadeningtheRangeofIREmission/Joon-sooLim,NamkyuLee, InjoongChang,DongIlShim,SeungyeongChoi,HyungHeeCho(YonseiUniv.)/ 263
10:15~10:45 Break
10:45~12:15 Transportation&Education Chairs:Dr.HyunWookLee(KoreaRailroadResearchInst.),
Prof.DongJooSong(YeungnamUniv.)
10:45~11:00 [WeB3.1]ShapeOptimizationofSeatCushionFramewithDissimilarMaterialsConsideringAutomobileVibrationCharacteristics/YeongJoJu,EuySikJeon,Dea-HoPark(KongjuNat’lUniv.)/ 264
11:00~11:15 [WeB3.2]ExperimentalVerificationofSteeringAngleControl foraThree-wheeledElectricVehicletoReduceaSenseofDifference/ByeongHeeYang,Young-JinPark(KoreaAdvancedInst.ofScienceandTechnology)/ 265
11:15~11:30 [WeB3.3]ObjectEstimationwithUltra-shortRangeRadarforRearAutomaticEmergencyBraking/Jae-HunKim,BongsobSong(AjouUniv.)/ 266
11:30~11:45 [WeB3.4]AerodynamicDesignofaSolarVehicleforEffectiveTransportationwithinCities/AdilNaseerKhawaja(NFCInst.ofEngineeringandTechnology)/ 267
51
Emerging Technologies in Mechanical Engineering
11:45~12:00 [WeB3.5]AnEffectiveCapstoneDesignProjectCourseOperationbyusingDesignThinking/DongJooSong(YeungnamUniv.)/ 268
12:00~12:15 [ WeB3.6] Education Methodology based on IP-R&D (Research andDevelopmentbasedonIntellectualProperty) inMechanicalEngineering/HahyeonJo,Young-SeongKim,Seul-BiLa(DonggukUniv.),Hyo-SungKim(HyosungPatent&LawFirm),JoongYeonLim(DonggukUniv.)/ 269
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
Mara Room
09:00~10:15 Energy2 Chair:Dr.AnhNgocVu(HoChiMinhCityUniv.ofTechnlogy)
09:00~09:15 [WeA4.1]AirfoilDesignOptimizationofVerticalAxisWindTurbinebasedonCFDSimulationofHorizontalCrossSection/AnhNgocVu,PhucHuuNguyen,HungVietLe(HoChiMinhCityUniv.ofTechnlogyandEducation)/ 270
09:15~09:30 [WeA4.2]EffectofFilletofPerforatedBlocksonHeatTransferinTurbineBladeTrailingEdge/SuWonKim,SeokMinChoi,JeongJuKim,SangjaeKim,EuiYeopJung,HyungHeeCho(YonseiUniv.)/ 271
09:30~09:45 [WeA4.3]PneumaticVariableInertiaFlywheel/HosseinNeishabouri(PartoPakEnergyCo.)/ 272
09:45~10:00 [WeA4.4] Development of Covalent-bonded Organic/Carbon Anode forSodium-IonBattery /HyunhoHa (Korea Inst.ofMachinery&Materials/KyungpookNat’lUniv.),SeunghoonNam,SeungminHyun(Korea Inst.ofMachinery&Mechanics),Soo-HwanJeong(KyungpookNat’lUniv.)/ 273
10:00~10:15 [WeA4.5]ComparisonofPredictivePerformanceandMeasurementofOff-grid15kWpSolarPowerGenerationinAcehTamiang/SamsulRizal,RazaliThaib,HamdaniUmar(Univ.ofSyiahKuala,Indonesia),T.AzuarRizal(SamudraUniv.)/ 274
10:15~10:45 Break
52
10:45~12:15 Energy3 Chair:Prof.DongSooKim(HanbatNat’lUniv.)
10:45~11:00 [WeB4.1]SolidOxideFuelCellSystemModelingwithHeatingandCoolingSystems:TheCaseofaHospital/SuhaengHeo,Jong-hyunSon,Young-BeomKim(HanyangUniv.)/ 275
11:00~11:15 [WeB4.2]EnhancementofFilmCoolingEffectivenessforBladeTipCoolingUsingVariousSlots/MinhoBang,SehjinPark,SeungyeoungChoi,JeongJuKim,Won-GuJoo,HyungHeeCho(YonseiUniv.)/ 276
11:15~11:30 [WeB4.3]AnEffectivelyAerodynamicDesignOptimizationofVerticalAxisWindTurbine/AnhNgocVu(HoChiMinhCityUniv.ofTechnology),HungVietLe(HoChiMinhCityUniv.ofTechnlogyandEducation)/ 277
11:30~11:45 [WeB4.4]AProposalofEfficiencyDefinitionsforReversibleSolidOxideFuelCellSystemCoupledwithWasteSteam/Van-TienGiap,KookyounAhn(KoreaInst.ofMachinery&Materials)/ 278
11:45~12:00 [WeB4.5]StochasticModelingofCarbon-supportedPlatinumCatalystLayerforOptimizationofPlatinumUtilizationinPEMFC/AliAkbar,SeunghoShin,JiawenLiu,SukkeeUm(HanyangUniv.)/ 279
12:00~12:15 [WeB4.6]Temperature Decrease in Hydroelectric GeneratorWorking inVacuumCondition/JeoungsuNa,NamSikJoo(NONGRIDCo.,Ltd.)/ 280
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
Udo Room
09:00~10:30 Dynamics&Control1 Chair:Prof.HeonSulJeong(KunsanNat’lUniv.)
09:00~09:15 [WeA5.1] Experimental Analysis of Mechanical Behavior and NumericalSimulationoftheVibratoryResponseofMagnetorheologicalElastomerBeam/MounirMeloussi,SalahAguib,NourAbdelkader,SettetAhmed(BoumerdesUniv.)/ 281
09:15~09:30 [WeA5.2]PositiveandNegativeVariableSwashPlateHydraulicPistonPumpAnalysisUsingCo-simulation/HeonSulJeong,JinHyunJang(KunsanNat’lUniv.)/ 282
09:30~09:45 [WeA5.3]UnmeasuredMotionEstimationMethodDuringGolfSwing/HyeobChoi,SukyungPark(KoreaAdvancedInst.ofScienceandTechnology)/ 283
53
Emerging Technologies in Mechanical Engineering
09:45~10:00 [WeA5.4]DevelopmentofHardware-in-the-loopTestRig forDualClutchActuator / Kyuhyun Sim, Sang-Min Oh (Sungkyunkwan Univ.), ChoulNamkoong,ChanggiGoo,Ji-SukLee (SECOSeojinAutomotiveCo.,Ltd.),Kwan-SooHan,Sung-HoHwang(SungkyunkwanUniv.)/ 284
10:00~10:15 [WeA5.5]DesignComparisonsofVibration-basedElectromagneticEnergyHarvesters/SeongYeolYoo(KeimyungUniv.),Young-WooPark,MyounggyuNoh(ChungnamNat’lUniv.)/ 285
10:15~10:30 [WeA5.6] Study onVibrations inVerticalTurbine Pumps / Ravindra S.Birajdar(KirloskarBrothersLimited),AappasahebA.Keste(MESCollegeofEngineering)/ 286
10:30~10:45 Break
10:45~12:00 Dynamics&Control2 Chair:Dr.JiwoonKwon(KoreaConstructionEquipmentTechnologyInst.)
10:45~11:00 [WeB5.1]ElastomericBearingswithDampeningEffectandVibrationStability/AdilNaseerKhawaja(NFCInst.ofEngineeringandTechnology)/ 287
11:00~11:15 [WeB5.2] Study for Improvement of Control Accuracy of ProportionalHydraulicValve/BaekJuSung,JongbaeLee (Korea Inst.ofMachinery&Materials)/ 288
11:15~11:30 [WeB5.3]AnalyticalandExperimentalVerificationforNovelDesignofVibroRipper /Beom-JunKang, JiwoonKwon (KoreaConstructionEquipmentTechnologyInst.)/ 289
11:30~11:45 [WeB5.4]ModelingandSimulationAnalysisofFourWheelSteeringForklift/JunjieHuang,BenxianXiao(HefeiUniv.ofTechnology)/ 290
11:45~12:00 [WeB5.5]ResearchonDynamicCharacteristicsofFTTransmissionbasedonJointSimulation/LiangXuan(JianghanUniv.),ChaoXie,TianminGuan,HengJiang(DalianJiaotongUniv.)/ 291
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
54
Biyang Room
09:00~10:15 ThermalEngineering3 Chair:Prof.Dong-KwonKim(AjouUniv.)
09:00~09:15 [WeA6.1]PerformanceAnalysisofaHeatTransformerwithaPlate-typeGenerator/AtsushiTsujimori(Kanto-gakuinUniv.)/ 292
09:15~09:30 [WeA6.2]An InvestigationontheEffectof theVaporTemperature in theReactionZonetotheLiquidYieldandCompositionofBio-oilwiththeMerantiSawdustasRawMaterial /NasruddinA.Abdullah,RachmadRahardian,ImansyahIbnuHakim,NandyPutra,RaldiA.Koestoer(Univ.Indonesia)/ 293
09:30~09:45 [WeA6.3]ExperimentalInvestigation,ANNModelingandTOPSISOptimizationofGasolinePremixed,Al2O3NanoAdditiveBlendedWCODirectInjectedHCCI-DIEngine/G.M.LionusLeo(St.Joseph’sCollegeofEngineering),S.Sekar(RajalakshmiEngineeringCollege),S.Arivazhagan(St.Joseph’sCollegeofEngineering)/ 294
09:45~10:00 [WeA6.4]OperativeEffectofIron(II,III)OxideNanofluidin4055SSTPCTUsingResponseSurfaceMethodology/AlagappanNarayanan,KarunakaranN.(AnnamalaiUniv.)/ 295
10:00~10:15 [WeA6.5]OrganicRankineCycleUsingLowGradeHeatSourcebelow100℃/HongwoneChoi(SeoulNat’lUniv.),Dong-KyuKim(Chung-AngUniv.),Min-SooKim(SeoulNat’lUniv.)/ 296
10:15~10:45 Break
10:45~12:00 ThermalEngineering4 Chair:Prof.Young-DeukKim(HanyangUniv.)
10:45~11:00 [WeB6.1]StudyontheCondensationHeatTransfer forVariousSubstrateThicknessandThermalConductivity/ShinKwanKim,ChanByon(UlsanNat’lInst.ofScienceandTechnology)/ 297
11:00~11:15 [WeB6.2]FastMassTransportunderGraphiticNanoconfinement/HyungGyuPark(SwissFederalInst.Technology)/ 298
11:15~11:30 [WeB6.3] DevelopmentofHybridLoopHeatPipeforApplicationonHighHeatFluxDevice/NandyPutra,ImansyahIbnuHakim,IwanSetyawan(Univ.Indonesia)/ 299
55
Emerging Technologies in Mechanical Engineering
11:30~11:45 [WeB6.4]Thermoelectric Generator’s Performance Enhancement / SyedSafeerMehdiShamsi,YoungChoi,YoungMinKim(KoreaInst.ofMachinery&Materials),TaeYoungKim(ChonbukNat’lUniv.)/ 300
11:45~12:00 [WeB6.5]ExperimentalStudyofFlowBoilingHeatTransferonHydrophilicandHydrophobicSurfaces/WeiTingHsu,GeehongChoi,NamkyuLee,DongIlShim,SeungyeongChoi,HyungHeeCho(YonseiUniv.)/ 301
13:00~13:15 Closing Ceremony / Lottery [Ballroom 1]
13:30~18:00 Social Tour
56
August 20 (Mon.)
Lobby, 2F
10:45~11:45 PosterSession(MoB) Chairs:Prof.YoonHyukKim(KyungHeeUniv.),
Dr.JunHeeLee(KoreaInst.ofMachinery&Materials)
[MoB.01] Multi-purposeOn-chipTestingforAntibioticSusceptibility/SeunggyuKim,FahimMasum,SeokhunLee,JessieSungyunJeon(KoreaAdvancedInst.ofScienceandTechnology)/ 305
[MoB.02] EffectofDentalCrownwithDifferentCuspAngles:3DFiniteElementAnalysis/Han-WoolKim,Eun-JeongBae,JoongYeonLim(DonggukUniv.)/ 306
[MoB.03] DielectrophoreticSeparationandEnrichmentofBacteriainMicrofluidicChipandItsAutomatedSystem/TaeheeYoon,KyungaHyun,HyoilJung(YonseiUniv.)/ 307
[MoB.04] MicrofluidicBloodCellSeparationforCirculatingTumorCellsEnrichment/SunghanLee(KeimyungUniv.),BongseopKwak(KoreaInst.ofMachinery&Materials),YunSeokHeo(KeimyungUniv.)/ 308
[MoB.05] AccurateEstimationofWallShearStressofaPressure-drivenLaminarFlowVisualized by Magnetic ResonanceVelocimetry / Jeesoo Lee, SeungbinKo(HanyangUniv.),Jee-HyunCho(KoreaBasicScienceInst.),SimonSong(HanyangUniv.)/ 309
[MoB.06] A Microfluidic Integrated Electrochemical Aptasensor for Detection ofBisphenolA/JunmooKim,LeilaKashefi-Kyerabadi(YonseiUniv.),NamHoBae,YooMinPark,SeokJaeLee(NationalNanofabCenter),Hyo-IlJung(YonseiUniv.)/ 310
[MoB.07] Eye-trackinginVirtualRealityforTherapeuticApproachonUnilateralNeglectofStrokePatients/GiupSeo,JihunKim,JaehyoKim(HandongGlobalUniv.)/ 311
[MoB.08] StudyontheMechanicalCharacteristicsofBraidedShaftforMedicalUse/JaejinKim,JunhoMoon(KoreaInst.ofIndustrialTechnology),YongdaeKim(KyungilUniv.),WoojinKim(KoreaInst.ofIndustrialTechnology)/ 312
[MoB.09] DevelopmentofSystemforStrokePatientstoImproveMotorFunction/Su
Poster Session
57
Emerging Technologies in Mechanical Engineering
YeonLee,JiHunKim,JaeHyoKim(HandongUniv.)/ 313[MoB.10] Slave-masterRobotSystemtowardInteractiveTele-echographyDiagnostic
System/JoonhoSeo,JangHoCho,TaehoKim,HyukJinLee,OhwonKwon(KoreaInst.Machinery&Materials)/ 314
[MoB.11] HeartRateandRespiratoryRateMonitoringforCollectingClinicalBigdataofPatientsinRoboticGaitTraining/EunKyungBae(Univ.ofUlsan),Sang-EunPark(AsanMedicalCenter),YoungjinMoon,MinHoChun,JaesoonChoi(AsanMedicalCenter/Univ.ofUlsan)/ 315
[MoB.12] DesignOptimizationofMandibularAdvancementDeviceforaPatientwithPartialDentures/Si-MyungPark (Korea Inst.ofScienceandTechnology),SoyonePark(KyungpookNat’lUniv.),HyeinChio(YonseiUniv.),LaehyunKim(KoreaInst.ofScienceandTechnology),SooHongLee(YonseiUniv.),GunwooNoh(KyungpookNat’lUniv.)/ 316
[MoB.13] ResearchonVentilationPerformanceEvaluationbasedonSeatingPositionforDrivers/Kyung-taeLee,Mun-SeokChoe,Kwon-SeKim(KongjuNat’lUniv.),Jin-WooKim,Young-Junkim(Seaton),Doo-SeukChoi(KongjuNat’lUniv.)/ 317
[MoB.14] DevelopmentofMicro-RTDSensorforRapidDiagnosisofDiabetesMellitusUsing Photothermal Effects of Red Blood Cells / Kirok Kwon, SudesnaChakravarty,Kyung-AHyun(YonseiUniv.),NamHoBae,SeokJaeLee(NationalNanofabCenter),Hyo-IlJung(YonseiUniv.)/ 318
[MoB.15] AnalysisofSkinConductanceSignal forEstimationofPatient’sConditionDuringTrainingonRoboticLocomotionRehabilitationSystem/Sang-EunPark (AsanMedicalCenter),EunKyungBae(Univ.ofUlsan),MinHoChun(AsanMedicalCenter/Univ.ofUlsanCollegeofMedicine), JaesoonChoi,YoungjinMoon(AsanMedicalCenter)/ 319
[MoB.16] TheDevelopmentofaRobustSignLanguageRecognitionSystemUsinganArmband-typeEMG-IMUSensor/SeongjungKim,JongmanKim,Bum-MoKoo,Soon-JaeAhn,Young-JaeJeong,Tae-HeeKim,Ha-NeulJung,Young-HoKim(YonseiUniv.)/ 320
[MoB.17] ThePerformanceofFingerGestureRecognitionSystemAccordingtoFeatureVectors/JongmanKim,Seong-JungKim,Bum-MoKoo,Soon-JaeAhn,Young-JaeJeong,Tae-HeeKim,Ha-NeulJung,Young-HoKim(YonseiUniv.)/ 321
[MoB.18] ComparisonAnalysisofCardiopulmonaryResuscitationPowerandRightAtrialPressure forPredictingCPRQuality/DoYeonLee,Sung-MinKang,Seoug-WookChoi(KangwonNat’lUniv.)/ 322
[MoB.19] BiologicalRemovalofCesiumandStrontiumfromRadioactiveWasteWaterbyLarge-ScaleMicroalgae-containingMembranes/Sang-HyoLee,HaraKu,JieunHong,TaeyoonKim,HanbokSeo,Seung-YopLee(SogangUniv.)/ 323
58
[MoB.20] NanoparticleCoatingforAnti-reflectiveApplications/BinhThanhNguyen,CholongJung,GyuhyunHan,Seung-ChulPark,HyuneuiLim(KoreaInst.ofMachinery&Materials)/ 324
[MoB.21] Skin-mimickingPressureandTemperatureStepTactileSensor/SeonggiKim,SunjongOh(Korea Inst.ofMachinery&Materials),MinseongKim(KoreaAdvanced Inst.ofScienceandTechnology),YoungdoJung,HyuneuiLim(KoreaInst.ofMachinery&Materials)/ 325
[MoB.22] EffectofDampedShoulderTrackingMechanismforShoulderRehabilitation/Kyoung-SoubLee,Hyung-SoonPark(KoreaAdvancedInst.ofScienceandTechnology)/ 326
[MoB.23] EffectofCompressiveStressonAirwayCiliaryBeating/SeongGyuLee(YonseiUniv.),SangnamLee, JooheonYoon (YonseiUniv.CollegeofMedicine),HyungsukLee(YonseiUniv.)/ 327
[MoB.24] Influence and Error Analysis ofVentricular Assist Device with CounterPulsationControlofPhaseLockedLoop/Joon-yeongKim,SeongminKang,SeongwookChoi(KangwonNat’lUniv.)/ 328
[MoB.25] The Correlation between ExerciseType and Stress /Yusung Kim (KoreaAdvanced Inst. of Science andTechnology), Minsu Park (Korea Univ.),SeungbumLee(KoreaAdvancedInst.ofScienceandTechnology),HyunsikJun (KoreaUniv.),HyungsoonPark (KoreaAdvanced Inst.ofScienceandTechnology)/ 329
[MoB.26] ANovelMotorizedBendingApparatusforSurgicalPlate/SeungbinPark,Jeonghwan Lee, Simyung Park (Korea Inst. of Science andTechnology),Gunwoo Noh (Kyungpook Nat’l Univ.), Jungwoo Lee (Kyung Hee Univ.),MinsooPark (SeoulNat’lUniv.ofScienceandTechnology),YoungjunKim(KoreaInst.ofScienceandTechnology)/ 330
[MoB.27] MEMSNeuralProbeforMonitoringNeurochemicals In-vivo/UikyuChae,HyoguenShin(KoreaInst.ofScienceandTechnology),HyunyongYu(KoreaUniv.),Il-JooCho(KoreaInst.ofScienceandTechnology)/ 331
[MoB.28] FabricationofPolycaprolactone/HydroxyapatiteScaffold to ImprovetheProliferationofOsteoblast-likeCellandBiomimeticMineralization/YongSangCho(WonkwangUniv.),SunkyungChoi(ChungnamNat’lUniv.),SehwanLee(WonkwangUniv.),KeeK.Kim(ChungnamNat’lUniv.),YoungsamCho(WonkwangUniv.)/ 332
[MoB.29] SingleCell-ladenMicrowellArraysofHematologicalTumorCellsforImprovedLiveCell ImagingofNkCell-mediatedTumorLysis/Seong-EunKim,HyemiKim,JunsangDoh(PohangUniv.ofScienceandTechnology)/ 333
[MoB.30] ANovelDesignofMembrane for IncreasedSensitivityofEnzyme-linked
59
Emerging Technologies in Mechanical Engineering
ImmunosorbentAssay(ELISA)/AnnaGo,YoungjuPark,MinhoLee(Chung-AngUniv.)/ 334
[MoB.31] PulsatileMicromixerDrivenbyWaterHeadPressure/ZhenglinLi,KorakotBoonyaphon,GeunyongKim,Sung-JinKim(KonkukUniv.)/ 335
[MoB.32] FabricationofFunctionalImplantScaffoldContainingwithBoneConductiveMaterialsandIn-vitroStudy/HunJinJeong(WonkwangUniv.),So-JungGwak(T&RBiofab),Young-SamCho,Kyung-DuckSeo,Sueng-JaeLee(WonkwangUniv.)/ 336
[MoB.33] OptimizationofSideHoles inaDoubleJStentforHighUrineFlowintheStenoticUreter/Kyung-WukKim(SoongsilUniv.),YoungHoChoi,SeungBaeLee(SeoulNat’lUniv.BoramaeHospital),YasutakaBaba(HiroshimaUniv.Hospital),Hyoung-HoKim,Sang-HoSuh(SoongsilUniv.)/ 337
[MoB.34] DetectionAlgorithmforTransitionWalkingfromLevelGroundtoUpslopeandStairAscentbasedonPlantarPressure/PankwonKim,JinkyuLee,ChoongsooS.Shin(SogangUniv.)/ 338
[MoB.35] PredictionofElderlyFallDuringiTUGTestbyIMUSensorSystem/Jeong-WooSeo,JinseungChoi,TaehoKim,JinsooLee,JunggilKim,GyeraeTack(KonkukUniv.)/ 339
[MoB.36] DevelopmentofaFEMModelofTransparentOrthodonticDevicetoPredicttheThickness/Yoon-HwanKim,Sung-HanRhim(DankookUniv.)/ 340
[MoB.37] AutomatedPlatforms forSamplePreparation inMolecularDiagnostics /DongkyuLee,Kang-HoLee,ChangwonKim,OhwonKwon(Korea Inst.ofMachinery&Materials)/ 341
[MoB.38] DisinfectionofBacterialPathogensUsingElectric-field InducedVortices/MinseokKim,JongyoonHan(KoreaInst.ofMachinery&Materials)/ 342
[MoB.39] EvaluationofBiomechanicalParametersLeadingtoHighLoadinginAnteriorCruciateLigamentofTarget-sideKneeduringGolfSwing/TserenchimedPurevsuren,BatbayarKhuyagbaatar,MaroCheon,MinkiHong,MingiChoi,JoonhoLee,KyungsooKim,YoonHyukKim(KyungHeeUniv.)/ 343
[MoB.40] TheEffectoftheRelationBetweenaSupportingFootandanObstacleontheTrippingoverforControllingaRoboticAnkleProsthetics/DonghwanHwang,JiwukJung,HyunSooWoo,YongkooLee(KoreaInst.ofMachinery&Materials)/ 344
[MoB.41] StudyontheExtrusionProcessofMulti-LumenTubeforUse inCatheter/SoonmoCho(KoreaInst.ofIndustrialTechnology),GyuManKim(KyungpookNat’lUniv.),WoojinKim(KoreaInst.ofIndustrialTechnology)/ 345
[MoB.42] EffectofBeveledOpticalFiberonBeamProfileandJointAngleMeasurement/Ji-SunKim,Han-ByeolOh,Jae-HoonJun(KonkukUniv.)/ 346
60
[MoB.43] Fabricationof theHydrophilicLineonaHydrophobicSurfacebyaLaserAblationProcessing/JiwhanNoh(Korea Inst.ofMachinery&Materials),MinkyungKim(KoreaUniv.)/ 347
[MoB.44] Flexible,StretchableandHighlySensitiveMechanicalSensorbasedonHybridConfigurationsofMicrostructures/KahyunSun,Hyun-HaPark,InsolHwang,MinhoSeong,Hoon-EuiJeong,Sang-HyeonLee(UlsanNat’l Inst.ofScienceandTechnology)/ 348
[MoB.45] FabricationofBio-inspiredDirectionalAdhesionPatchbyCNCMachining/InsolHwang,HoonYi,HangilKo,Hyun-HaPark,Sang-HyeonLee,MinsuKang,HoonEuiJeong(UlsanNat’lInst.ofScienceandTechnology)/ 349
[MoB.46] FlexibleandShape-reconfigurableHydrogelInterlockingAdhesivesforHighAdhesioninWetEnvironments/Hyun-HaPark,MinhoSeong,KahyunSun,InsolHwang,Sang-HyeonLee,MinsuKang,HangilKo,Hoon-EuiJeong(UlsanNat’lInst.ofScienceandTechnology)/ 350
[MoB.47] FunctionalOpticalComponentsbasedonSelf-assemblyofColloidalParticles/Seung-ChulPark,HelimLim(KoreaInst.ofMachinery&Materials)/ 351
[MoB.48] FunctionalCarbonLayeronCatalystLayerofPolymerElectrolyteMembraneFuel Cell at Low Humidity Condition / Changwook Seol (Incheon Nat’lUniv.),SegeunJang,YunSikKang,SungJongYoo(KoreaInst.ofScienceandTechnology),SangMoonKim(IncheonNat’lUniv.)/ 352
[MoB.49] BioinspiredMicropatternsforTuningtheDimensionalityofCassietoWenzelTransitions/PrashantPendyala,HongNamKim,SungWookYang,Il-JooCho,Eui-SungYoon(KoreaInst.ofScienceandTechnology)/ 353
[MoB.50] BiomimeticMulti-functionalDrillInspiredbytheMandibleofCyllorhynchitesUrsulus/YoungdoJung,Duck-GyuLee(KoreaInst.ofMachinery&Materials),EunokLee(Nat’l Inst.ofEcology),SunjongOh,SeonggiKim(KoreaInst.ofMachinery&Materials),YungkunKim(Nat’l Inst.ofEcology),HyuneuiLim,WanDooKim(KoreaInst.ofMachinery&Materials)/ 354
[MoB.51] MultiscalePatternedStemCellPatchesforTissueRegeneration/DaunKim,SunhoPark,DohyeonLee,WoochanKim,JanghoKim(ChonnamNat’lUniv.)/ 355
[MoB.52] ControllableDetachingofGecko-inspiredDryAdhesiveUsingSMP/JihoonLee,SungHoLee,MoonKyuKwak(KyungpookNat’lUniv.)/ 356
[MoB.53] FabricationofSalvinia InspiredMultifunctionalStructureUsingCapillaryForce-inducedClusteringofMicropillarArrays/MinsuKim,MoonKyuKwak(KyungpookNat’lUniv.)/ 357
[MoB.54] Bio-applicableMicrofluidicSystemUsingLuminolChemicalLuminescenceDetectionwithQuantitativeInjectionofSmallAmountofReagents/BongSuKang,Moon-KyuKwak(KyungpookNat’lUniv.)/ 358
61
Emerging Technologies in Mechanical Engineering
[MoB.55] FabricationofDryAdhesivebyUsingaPVA/SunghoLee,BongSuKang,MoonKyuKwak(KyungpookNat’lUniv.)/ 359
[MoB.56] A Study for the Enhancement of Crop Growth Environment by aSupplementaryLightingSystemControlinVinylGreenhouse/ChanKyuLee,YongHoonIm,SiWonYoon(KoreaInst.ofScienceandTechnology),YoungJikYoun(KoreaInst.ofEnergyResearch)/ 360
[MoB.57] Gecko-foot-inspired Dry Adhesives for Controllable Adhesion System /SeongminKang(ChungnamNat’lUniv.)/ 361
[MoB.58] DevelopmentofUltra-sensitiveMechanicalCrackbasedSensor/TaeminLee,YongwhanChoi,GunheeLee,PeterV.Pikhitsa(SeoulNat’lUniv.),SangMoonKim(IncheonNat’lUniv.),DaeshikKang(AjouUniv.),MansooChoi(SeoulNat’lUniv.)/ 362
[MoB.59] Fabr icat ion of Bioinspired Mushroom-shaped Micro Array UsingNanocompositeandHigh-temperatureDryAdhesiveApplication/MinhoSeong,InsolHwang,HoonYi,Hyun-HaPark,Hoon-EuiJeong(UlsanNat’lInst.ofScienceandTechnology)/ 363
[MoB.60] 3DPrintingTechnique-appliedWallandCeilingClimbingQuadrupedRobotwithHighWaterRepellency/HangilKo,HoonYi,HoonEuiJeong(UlsanNat’lInst.ofScienceandTechnology)/ 364
[MoB.61] Ciliary-beating InspiredTorque Reversal Mechanism forTendon-drivenSoftContinuumRobots/Woo-youngChoi(SeoulNat’lUniv.),Yong-jaiPark(SunmoonUniv.),Kyu-jinCho(SeoulNat’lUniv.)/ 365
17:00~18:00 PosterSession(MoD) Chairs:Prof.JinWeonKim(ChosunUniv.),Prof.Hae-JinChoi(Chung-AngUniv.)
[MoD.01] SensitivityStudyofSimulationonLossofResidualHeatRemovalAccidentinLSTFExperimentUsingSPACECode/MinheeKim(KoreaHydroandNuclearPowerCo.),SangJunHa(KHNPCentralRessearchInstitute)/ 366
[MoD.02] DevelopmentandApprovalofSafetyAnalysisCodeforNuclearPowerPlantsinKorea/MinheeKim(KoreaHydroandNuclearPowerCo.),IlyongYoo,SangJunHa(KHNPCentralResearchInstitute)/ 367
[MoD.03] RotorShapeDesignandAnalysisforImprovementTorqueofSmallLightweightMRBrake/DoYoungLee(DaeguTechnicalUniv.),MyungKwanPark(PusanNat’lUniv.)/ 368
[MoD.04] PredictionofGasLeakagebyPressureandTemperatureUsingComputationalFluidDynamics/JiYoungYoon(KoreaInst.ofIndustrialTechnology)/ 369
[MoD.05] DevelopmentofanElectricallyAssistedTurbochargerforaHeavy-dutyDiesel
62
Engine/MunkyoungChoi,ByunghuiKim(InGineers.)/ 370[MoD.06] OptimumDesignofJ-GroovetoSuppresstheSwirlFlowinaDraftTubeofaBulb
HydroTurbineModel/VietLuyenVu,ZhenmuChen(MokpoNat’lUniv.),Young-DoChoi(Inst.ofNewandRenewableEnergyTechnologyResearch)/ 371
[MoD.07] OptimumDesignofMulti-stageCentrifugalPumpPassageShapefor theImprovementofthePumpPerformance/MingGuo,ZhenmuChen,Young-DoChoi(MokpoNat’lUniv.)/ 372
[MoD.08] NumericalSimulationonNewlyProposedSealingSysteminaCentrifugalPump/Jun-HoJeon,HyonjiKim,YoonhwanChoi,YeonwonLee(PukyongNat’lUniv.),NobuyukiOshima(HokkaidoUniv.)/ 373
[MoD.09] StudyonParticleVelocityDistributionInsideDropletUsingThree-dimensionalParticleTrackingVelocimetryMethod/YeonghyeonGim,DongkyuJang,DongkeeSohn(SungkyunkwanUniv.),HyoungsooKim(KoreaAdvancedInst.ofScienceandTechnology),HanseoKo(SungkyunkwanUniv.)/ 374
[MoD.10] MassProductionofLiposomeEncapsulatedHydrogelBeadsinMicrofluidicSystem/WanjaeChoi,HuisooJang,TaejoonJeon,SunMinKim(InhaUniv.)/ 375
[MoD.11] Drop-filmCollisionDynamicsWithinan ImmiscibleFluid/ChanJinPark,JaebumPark,HoyoungKim(SeoulNat’lUniv.)/ 376
[MoD.12] EffectofTubePluggingontheTubeInletOrificeDesignofaOnce-throughSteamGenerator/HunSikHan(KoreaAtomicEnergyResearchInst.),RayanAlshehri(KingAbdullahCityforAtomicandRenewableEnergy),Han-OkKang,JuhyeonYoon,YoungInKim(KoreaAtomicEnergyResearchInst.)/ 377
[MoD.13] AxisymmetricSqueezingDynamicsofResinDropletwithSurfaceTension/KuendongHa(DankookUniv.)/ 378
[MoD.14] NumericalEstimationforReducingSloshDynamicUsingAir-trappingEffectsinaPartiallyFilledPrismaticTank/HyunjongKim,JunhoJeon,NanjundanParthasarathy,Yeon-WonLee(PukyongNat’lUniv.)/ 379
[MoD.15] DynamicsofWaterImbibitionthroughSuperabsorbentPolymer/SooyoungChang,WonjungKim(SogangUniv.)/ 380
[MoD.16] AssessmentoftheSPACECodeUsingtheLSTFPROTestSimulatingaLossofResidualHeatRemovalAccident/Tae-WooKim,MinheeKim,SangJunHa(KoreaHydroandNuclearPowerCo.)/ 381
[MoD.17] AComparativeStudyforLESoftheBluff-body-stabilizedTurbulentFlames/HyunseobLee,BokJikLee(GwangjuInst.ofScienceandTechnology)/ 382
[MoD.18] EffectofWaterMistonVisibility:PreliminaryInvestigation/DongHwanKim,ChanSeokJeong,ChiYoungLee(PukyongNat’lUniv.)/ 383
[MoD.19] NumericalSimulationofAcousticVaporizationofMicrodroplets/SeongwookCho,GihunSon(SogangUniv.)/ 384
63
Emerging Technologies in Mechanical Engineering
[MoD.20] NumericalStudyonThree-dimensionalDesignofTurbineRotorBladeforLPRE(LiquidPropellantRocketEngine)Turbopump/ByoungikChoi,KuisoonKim(PusanNat’lUniv.),HanggiLee(KoreanAerospaceResearchInst.),SooinJeong(PusanNat’lUniv.)/ 385
[MoD.21] DevelopmentofLaserTrackerSystemUsingAbsoluteDistanceMeasurementMethod / Seongheum Han, Seungman Kim (Korea Inst. of Machinery &Materials),Seung-WooKim(KoreaAdvancedInst.ofScienceandTechnology),Jeong-SeokOh(KoreaInst.ofMachinery&Materials)/ 386
[MoD.22] End-to-endLearningApproachtoCollisionAvoidanceforMobileRobot/Jeong-JungKim,Doo-YeolKoh,JinseongPark,HyeonbeomLee(KoreaInst.ofMachinery&Materials)/ 387
[MoD.23] SuperhydrophobicModificationofNetworkedNanowireSurface/CheonjiLee(SungkyunkwanUniv./KoreaInst.ofMachinery&Materials),SunjongOh,SeungchulPark,WandooKim(KoreaInst.ofMachinery&Materials),JinkeeLee(SungkyunkwanUniv.),HyuneuiLim(KoreaInst.ofMachinery&Materials)/ 388
[MoD.24] Fault IdentificationofFour-wheelSteeringandDrivingElectricVehicle /JinseongPark(KoreaInst.ofMachinery&Materials)/389
[MoD.25] Developmentof3DAir-meshFabricforResistivePressureSensing/Kang-HoLee,Yeong-EunKwon,DongkyuLee,YongkooLee,OhwonKwon(KoreaInst.ofMachinery&Materials)/ 390
[MoD.26] TheExperimentalStudyontheAlignmentof2DImagesforDICbasedonPhotogrammetry/WonseopKim,SeokmooHong(KongjuNat’lUniv.)/ 391
[MoD.27] Smart Contact Lens for Continuous Colorimetric Intraocular PressureMonitoring/BoheeMaeng,JungyulPark(SogangUniv.)/ 392
[MoD.28] DynamicsofthePiezoelectricDrivenInkJetting/Duck-GyuLee,EunjoongLee,KyungjunSong,ShinHur(KoreaInst.ofMachinery&Materials)/ 393
[MoD.29] DevelopmentoftheImpactRobustInsole-typeGroundReactionForce(GRF)MeasurementSystem/JunghoonPark,JungKim(KoreaAdvancedInst.ofScienceandTechnology)/ 394
[MoD.30] NoiseReductionofPointCloudModelUsingModifiedK-NNAlgorithmwithGPUParallelProcessing/ TaeYoungLee,JaeyoungJang,MoonWonJung,JongHyeonPark(HanyangUniv.)/ 395
[MoD.31] PolyimideLift-offProcessingUsingUV-fiberLaser/YoonsukKim,YoungsuNoh,SeunghoPark(HongikUniv.),Byung-KukKim,HyoungJuneKim(ViatronTechnologies)/ 396
[MoD.32] DevelopmentofSmartPersonalTrainingSystem:AutomaticLoadControlbasedonUser’sLiftingSpeed/HanjinJo,KiyoungKim,MinseoKim,Haegeun
64
Ji,JihunKim,JaehyoKim(HandongGlobalUniv.)/ 397[MoD.33] OptimalSystemofHighPowerVCSELModulesforLarge-scaleSiliconWafers
VerticalLPCVD/YoungsuNoh,YoonsukKim,SeunghoPark(HongikUniv.)/ 398[MoD.34] DesignMethodologiesforTendonDrivenSoftGripper/JaeminEom,Woo-
YoungChoi,WoongbaeKim,Jae-RyeongChoi,Kyu-JinCho(SeoulNat’lUniv.)/ 399
[MoD.35] Fluid-thermal-structureInteractionofBellowsinQuickConnect/Disconnect/Sung-CheolJang(KoreaPolytechnic),Hyun-CheolJung(NES),Jeong-PilEom,Kyu-JinShim(GNTP),So-NamYun(KoreaInst.ofMachinery&Materials)/ 400
[MoD.36] FabricationofaNovelPressureSensorUsingContact-resistanceChange/Jung-HoPark(KoreaInst.ofMachinery&Materials),Dong-HwanLee(MontrolCo.Ltd.),So-NamYun,Young-BogHam(KoreaInst.ofMachinery&Materials)/ 401
[MoD.37] DevelopmentofPropulsionEquipmentModelingandSimulatorofPropulsionEquipment forVerificationofPropulsionSystemofComplexPropulsionSystem/HunseokLee,Jae-HeeJang,YoungMinKang,Jin-SeokOh(KoreaMaritimeandOceanUniv.)/ 402
[MoD.38] AStudyonGuidedWavePropagationinLongDistanceCurvedPipe/JunpilPark,SeonggyumJeong,DonggonKang,YounhoCho(PusanNat’lUniv.)/ 403
[MoD.39] TubePluggingCriteriaforGeneralandLocalThinningbasedonAnalyticalandNumericalSolutions/HongBoDinh,JongminYu,KeebongYoon(Chung-AngUniv.),ChulPark,SungwooRyu(EnesgCompany)/ 404
[MoD.40] Basic Study for Development of Multi-stage Mechanical Fuse Device /YounghoonKong(KoreaUniv.ofScienceandTechnology),TaesooKwon,HyunseungJung,JinsungKim(KoreaRailroadResearchInst.)/ 405
[MoD.41] ImagingandSizingofSurfaceDefectsUsingSyntheticApertureFocusingofLaser-generatedSurfaceWaves/SunghoChoi(HanyangUniv.),SangminKim(SamsungElectronics),Kyung-YoungJhang(HanyangUniv.)/ 406
[MoD.42] GuidedWave Mode Selection in AcousticWavenumber SpectroscopyTechniqueforDamageDetection/SeonginMoon,ToKang,SoonwooHan(KoreaAtomicEnergyResearchInst.)/ 407
[MoD.43] Developmentof InstallationProceduretoModularizeReactor Internals /TaesoonKim(KoreaHydroandNuclearPowerCo.)/ 408
[MoD.44] EnhancementofMeasurementSensitivityofWallThinnedPlateUsingModeTuningBasedScanningLDV(LaserDopplerVibrometer)Scanner/ToKang,SeonginMoon,SoonwooHan(KoreaAtomicEnergyResearchInst.),JunyoungJeon,GyuhaePark(ChonnamNat’lUniv.)/ 409
[MoD.45] AStudyontheAnalyzingtheCausesofCorrugationofRail/Young-SamHam
65
Emerging Technologies in Mechanical Engineering
(KoreaRailroadResearchInst.)/ 410[MoD.46] AParametricStudyonChabocheModeltoSimulateMetalRatchetingand
ExperimentalApplication/SungYongKoo,JungmooHan,KaruppasamyPandianMarimuthu,HyungyilLee(SogangUniv.)/ 411
[MoD.47] TMF Life Prediction for Aluminum Alloy Piston Head /Wan-Kyu Choi,SeungsooJang(HanyangUniv.), JongcheonPark(HyundaiMotorGroup),TaewonKim(HanyangUniv.)/ 412
[MoD.48] InvestigationandEvaluationofRideComfortPerformanceonScaled In-wheel-motorVehicle/YoungsuKo,DanielLim,YejiKim,NamsuKim(KonkukUniv.)/ 413
[MoD.49] Reliability-basedDesignOptimizationonFlightControlParametersofGlidingBomb Using PIDOTool / Changyu Kim,Youngeun Hwang, Hwajin Nam(AgencyforDefenseDevelopment)/ 414
[MoD.50] A Study on the Life Cycle Characteristics of Brush-type DC Motor forAutomobiles/WaeGyeongShin(KoreaAutomotiveTechnologyInst.)/ 415
[MoD.51] Simulation of DropletVolume with Consideration of Displacement andMeniscusofPiezoelectricDispenser/Byeung-CheolAn(Univ.ofScienceandTechnology),Young-BogHam,MojizAbbasTrimzi,Jung-HoPark,So-NamYun(Univ.ofScienceandTechnology/KoreaInst.ofMachinery&Materials)/ 416
[MoD.52] MaterialSelectionofAnchorPartsforTendon-driven3DPrintedSoftGripper/Woong-BaeKim,Jun-YoungLee,Woo-youngChoi,Kyu-JinCho(SeoulNat’lUniv.)/ 417
[MoD.53] StudyonTreadBlockDamagePredictioninSmoothRoad/KeonHeeBaek,Subin Choi, Naktak Jeong, Heerok Hong, Eunsung Lee, Hyungmin Lee,MyungwonSuh(SungkyunkwanUniv.)/ 418
[MoD.54] Integrated Process Design of Al6061 Alloy Bolts for Fastening OffshorePlatforms / Sungcheol Park, Kyung-Hun Lee, Myoung-Hwan Kim (KoreaMaritimeandOceanUniv.)/ 419
[MoD.55] ExperimentsonthePrintingResolutionofaNewMetalPBF3DPrintingProcessbyPrintingThinWallsUsingSUS316L/BongkukSon(ChungnamNat’lUniv.),DongsigShin,PilgongChoi,HyonkeeSohn(KoreaInst.ofMachinery&Materials)/ 420
[MoD.56] DynamicAnalysisoftheGearSystembytheTime-varyingMeshStiffnessandBacklash/ChanILPark(Gangneung-WonjuNat’lUniv.)/ 421
[MoD.57] DesignofAsepticWeighingFillingSystemwithDigitalLoadCell/Se-BuOh,SehoonOh(Chung-AngUniv.),ByeongroMin(DaelimUniv.)/ 422
[MoD.58] MachineStatusInformationMonitoring(Accumulation)System/SeungWooLee,JongKweonPark(KoreaInstitueofMachinery&Materials,Korea)/ 423
66
[MoD.59] FormabilityandFormingForceinIncrementalSheetFormingofAA7075-T6atDifferentTemperature/XiaoXiao,Van-CuongDo,Chan-IlKim(KyungpookNat’lUniv.),Xiao-DongLv(BeihangUniv.),Young-SukKim(KyungpookNat’lUniv.)/ 424
[MoD.60] ExperimentsandAnalysisofGlassEdgeSealingUsingMicrowave/JaekyungKim,EuySikJeon,Dong-gooSohn(KongjuNat’lUniv.)/ 425
[MoD.61] AStudyontheEffectofRasterDirectionandInfillofFDMontheBucklingBehaviorofCylindricalLatticeStructurebyAddtiveManufacturing/BeomGyunJeong(KunsanNat’lUniv.),Ji-WonJin(JIAT),Ung-WonPark,Ki-WeonKang(KunsanNat’lUniv.)/ 426
[MoD.62] Bonding Properties on Diffusion Bonding Layer for Micro PCD-WCToolFabrication/Uk-SuKim,SeungSikShin,Ki-GwonKim,Ba-WiJeong,Jung-WooPark(ChosunUniv.)/ 427
[MoD.63] DeburringofOffsetIntersectingHoleswithAbrasiveFlowMachining/KwangJoonKim,YoungGwanKim,KwonHeeKim(KoreaUniv.)/ 428
67
Emerging Technologies in Mechanical Engineering
August 21 (Tue.)
Lobby, 2F
10:45~11:45 PosterSession(TuB) Chairs:Prof.GyuhaePark(ChonnamNat’lUniv.),
Dr.SeokHoYoon(KoreaInst.ofMachinery&Materials)
[TuB.01] NumericalAnalysisofFlameSpreadforWood/Chang-YongKim,WonheePark(KoreaRailroadResearchInsit.)/ 429
[TuB.02] EffectsofAisotropicCnductivityonThermalResponseofSupersonicRadome/HyungMoBae,Ji-YeulBae,JihyukKim,SeungyeongChoi,HyungHeeCho(YonseiUniv.)/ 430
[TuB.03] BoilingHeatTransferEnhancementviaSurfaceWettabilityModification/DonghwiLee(YonseiUniv.),BeomSeokKim(Nat‘lFusionResearchInst.),NamkyuLee,DongIlShim,HeeSeungPark,HyungHeeCho(YonseiUniv.)/ 431
[TuB.04] ThermalFluidCharacteristics inMulti-tubeTypeCirculatingFluidizedBedReactorforCO2Capture/SeungyeongChoi,Joon-sooLim,SeokMinChoi,HyungMoBae,InSeokLee,HyungHeeCho(YonseiUniv.)/ 432
[TuB.05] AStudyontheFlowCharacteristicsofDryingNozzleinCoatingYarnDryingDevice/HwankukKim,KyuHoiDo,Young-MinSeo(KoreaTextileMachineryConvergenceResearchInst.)/ 433
[TuB.06] PhaseChangeEffecton50kWPrintedCircuitHeatExchangerPerformance/Jeong-HeonShin(KoreaInst.ofMachinery&Materials),JooHaAhn,JaeHyunIm(TanktechCo.,Ltd.),JunSeokChoi,SeokHoYoon(KoreaInst.ofMachinery&Materials)/ 434
[TuB.07] TheEffectsof theCompressibilityof theSubsonicFlowonHeatTransferCharacteristics inaMicroscaleImpingingSlotJet/SeunghoHan,Hyun-JinPark,DaeHeeLee(InjeUniv.)/ 435
[TuB.08] MixedRefrigerant-basedOrganicRankineCycleAnalysisforUsingWasteHeatRecoveryfromDieselPowerGenerator/DaMinShim,Kyung-HoShin,Tae-JinLee,Jun-suLee,Dong-SooJung,Joo-HyungKim(InhaUniv.),HunJung,Jong-YoungCho,Sang-HyupLee,Cheol-HeeLee(ResearchInst.ofKoreaElectricPowerCoporation)/ 436
[TuB.09] HeatTransferCharacteristicsofOscillatingHeatPipewithThree-dimensionalStructure/YoungbaeHan,Young-JiKwon(KoreaMilitaryAcademy)/ 437
[TuB.10] StudyonHeatTransferCharacteristicsofaShortHelicalPlateinaHorizontalCircular Tube / Tae -hyun Chang (Kyungnam Univ.) , Kwon-Soo Lee
68
(InternationalUniv.ofKorea),Ki-WonChang(DongHwanInd.Corp),SangMinKim(TAESUNG),Chang-HoanLee(KoreaInst.ofScienceandTechnologyInformation)/ 438
[TuB.11] DesignforHighLatentHeatStorageandHighThermalConductiveofPhaseChangeMaterials(PCMs)UsingCarboxymethylCellulose(CMC)CarbonFoam/HonggunKim,YongsunKim,LeekuKwac,HeejaeShin,SangokLee,UsangLee,HyeKyoungShin(JeonjuUniv.)/ 439
[TuB.12] Analysis of Flame SpreadingVelocity in Static Combustion Chamber ofIgnitionSystemUsingNewIgnitionTechnique/MunseokChoe,KwonseKim,TaejunYoon,DogyeongKang,NamwookKim,DooseukChoi(KongjuNat’lUniv.)/ 440
[TuB.13] NumericalAnalysisoftheCompactHeliumLiquefierwithaGifford-McMahonCryocoolerUsingThree-dimensionalFiniteElementMethod/InmyongPark,YeonsukChoi(KoreaBasicScienceInst.)/ 441
[TuB.14] Analysisof ImprovementforHighPowerDensityCylindrical InstantaneousHotWaterSystem/SungchunChoi(SeoulNat’lUniv.),ChanjungPark(Coway)/ 442
[TuB.15] A3DComputationalElectromagnetic-thermalCoupledAnalysisforEvaluationofCoolingPerformanceofBrushlessDCMotor/HeungsuKim,DongohLee,NamsuKim(KonkukUniv.)/ 443
[TuB.16] TheEffectofDilutedHotOxidantandFuelonNOFormation inOxy-fuelFlamelessCombustionUsingOppositeJet/Chun-LoonCha,Ho-YeonLee,SangSoonHwang(IncheonNat’lUniv.)/ 444
[TuB.17] DevelopmentofTestMethod forCharacterizingFlexibleThermoelectricEnergyHarvester/TaeminKim,DongohLee(KonkukUniv.),CheolungCha(KoreaElectronicsTechnologyInst.),YunhyunRoh,SungjoonHeo(Blue-Sys),NamsuKim(KonkukUniv.)/ 445
[TuB.18] NumericalInvestigationonNOXFormationinOxygen-CH4MILDCombustionwithAirLeakage/HoYeonLee,Chun-LoonCha,Sang-SoonHwang(IncheonNat’lUniv.)/ 446
[TuB.19] NumericalStudyofReverseWater-gasShiftReactioninMicrochannelReactor/SanghoSohn,YoungKim,Jeong-HeonShin,JungchulKim,SeokHoYoon,KongHoonLee(KoreaInst.ofMachinery&Materials)/ 447
[TuB.20] Numerical Simulation of MILD Combustion with Liquid Fuel Spray in aCombustionVessel / ChunLoon Cha, Ho-Yeon Lee, Sang-Soon Hwang(IncheonNat’lUniv.)/ 448
[TuB.21] ComputationalAnalysisonOxygenMildCombustionUsingSynthesisGas/Sung-HoLee(CombustechLtd.),Ho-YeonLee,Chun-LoonCha,Sang-Soon
69
Emerging Technologies in Mechanical Engineering
Hwang(IncheonNat’lUniv.)/ 449[TuB.22] InvestigationontheImprovementofMechanicalPerformancebyImproving
Heat Dissipation in Brushless DC Motor / Dongoh Lee, Heungsu Kim,YounghunLee,TaeminKim,NamsuKim(KonkukUniv.)/ 450
[TuB.23] DevelopmentoftheCombinedDOCandUrea-SCRAftertreatmentSystemwithReductionEffectofNOXEmissionsinaLPGSteamBoiler/Myung-whanBae(GyeongsangNat’lUniv.), JaeokBae(Tokyo Inst.ofTechnology),Hui-seongPark(GyeongsangNat’lUniv.)/ 451
[TuB.24] CoolingPerformanceAnalysisofHeatPumpSystemwithHybridGroundHeatExchanger (GHE) /ByonghuSohn,Jae-SikKang (Korea Inst.ofCivilEngineeringandBuildingTechnology)/ 452
[TuB.25] AStudyontheAmplificationoftheAirCurrentofLow-powerHigh-efficiencyBlowersforHeatPumps/Sung-WooHa(WindampCo.Ltd),Dong-HyunCho(DaejinUniv.),Young-MinOh(WindampCo.Ltd)/ 453
[TuB.26] DesignofaDistributorforFlowUniformityinPrintedCircuitHeatExchangers/JungchulKim,Jeong-HeonShin,SanghoSohn,SeokHoYoon(KoreaInst.ofMachinery&Materials)/ 454
[TuB.27] Cooling Performance Evaluation of Lithium-ion Pouch Cell with LiquidChannelalongBothSurfaces/MaheshSureshPatil(Dong-AUniv.),Dae-WanKim(NTFTechCompany),Jae-HyeongSeo,TongVoNguyen,GihanEkanayake(Dong-AUniv.),SatyamPanchal(Univ.ofWaterloo,Canada),Moo-YeonLee(Dong-AUniv.)/ 455
[TuB.28] ANumericalStudyofFlameStabilization inPorousMediaBurner/QasimSarwarKhan,MyoungKeunKwon,EungRyeolSeo(SamsungElectronics)/ 456
[TuB.29] Experimental and Numerical Study on HeatTransfer Enhancement byChimneyEffect/JongDaeKim,So-NamYun,Jung-HoPark,Young-BogHam(KoreaInst.ofMachinery&Materials)/ 457
[TuB.30] UltrasonicEcho-locationbasedonMachineLearning/ChanYongJung,KwanKyuPark(HanyangUniv.)/ 458
[TuB.31] DevelopmentofVirtualCarSimulator forDeepLearningTraining/SabirHossain,HunNyeongJun,InSeungLee,DeokJinLee(KunsanNat’lUniv.)/ 459
[TuB.32] AutomaticControlofCardiacAblationCatheterwithDeepReinforcementLearningMethodinVirtualSimulation/HyeonseokYou,EunKyungBae(Univ.ofUlsan),YoungjinMoon,JiHoonKwon,JaeSoonChoi(AsanMedicalCenter/Univ.ofUlsan)/ 460
[TuB.33] EstimatingGroundReactionForce(GRF)fromTrunkRotationduringGolf-swing:ApplicationofDeepLearninginSportBiomechanics/BumJoonKim,SukyungPark(KoreaAdvancedInst.ofScienceandTechnology)/ 461
70
[TuB.34] ReinforcementLearningAlgorithmforAssemblyStrategyofSquarePeg-in-holeUsingDMPandPoWER/Young-LoulKim,HyunJunJo,Jae-BokSong(KoreaUniv.)/ 462
[TuB.35] Thin-walledBeamAnalysisbasedonHigher-orderBeamTheoryUsingCross-sectionalDeformationsIdentifiedbyPrincipalComponentAnalysis/DongilShin,YoonYoungKim(SeoulNat’lUniv.)/ 463
[TuB.36] CharacterizationofMetalElectrodeCorrosiononIonicPolymer/JunmoKim,Jae-BumPyo,Taek-SooKim(KoreaAdvancedInst.ofScienceandTechnology)/ 464
[TuB.37] PredictionofReliabilityonFlexibleSubstratesthroughAcceleratedLifeTest/CheongHwanLee,JungwooYe,JaesoolShim(YeungnamUniv.)/ 465
[TuB.38] CombinatorialMechanicalTestingofW-basedAlloysUsingHigh-throughputNanoindentationforFusionReactorApplications/EuiminCheong,DonghyunPark,HaechanJo,DaegunYou, InjunOh,KyunghoonKim,DongwooLee(SungkyunkwanUniv.)/ 466
[TuB.39] EffectofInternalHydrogenonStrainControlledFatigueProperties/UnBongBaek,SeunghoonNahm(KoreaResearchInst.ofStandardsandScience)/ 467
[TuB.40] ReliabilityofCreep-lifePredictiononHeatAffectedZoneofGrade91SteelWeldJoints/Woo-GonKim,JaeyoungPark(KoreaAtomicEnergyResearchInst.),SeonjinKim(PukyongNat’lUniv.),JihyunYoon(KoreaAtomicEnergyResearchInst.)/ 468
[TuB.41] AUniqueInterfacialAdhesionCharacterandItsRole inElectromechanicalCharacteristicsofCVDGrapheneonFlexibleSubstrate/JeongHwanLee,Seung-WookBaek,RakeshSadanandSharbidre, InhyangKang,SeongguHong(KoreaResearchInst.ofStandardsandScience)/ 469
[TuB.42] StrongandStretchableCrystallineHydrogels/HieuHongLe,VanTronTran,SurajKPathak,InsuJeon(ChonnamNat’lUniv.)/ 470
[TuB.43] Non-destructiveWireFaultDiagnosisUsingResistanceSpectroscopyAnalysis/DaeilKwon,EunjooPark(UlsanNat’lInst.ofScienceandTechnology)/ 471
[TuB.44] DeterminationofInspectionIntervalforAircraftStructuresUsingStochasticApproaches/HeeseongKim,SungjinKim,JoohoChoi(KoreaAerospaceUniv.)/ 472
[TuB.45] ExperimentalSetupforStudyaboutPrognosticsandHealthManagementforBLDCMotors/YounghunLee,DongohLee,YoungsuKo,NamsuKim(KonkukUniv.)/ 473
[TuB.46] Multifunctional Alginate-based Magnetic Nanoparticles for MultimodalImagingofBreastCancerCells/Yong-SuKwon,Kee-BongChoi,Jae-JongLee(KoreaInst.ofMachinery&Materials)/ 474
71
Emerging Technologies in Mechanical Engineering
[TuB.47] VerticallyGrownSilverNanostructuresAssembledinGoldNanobowls:HighlyRobust,UniformandUltra-sensitiveSurface-enhancedRamanScatteringSubstrates for miRNA Sensing /Taeksu Lee (Korea Inst. of Machinery &Materials), Jung-SubWi (KoreaResearch Inst.ofStandardsandScience),SeungjooHaam(YonseiUniv.),TaeGeolLee(KoreaResearchInst.ofStandardsandScience),Jae-JongLee(KoreaInst.ofMachinery&Materials)/ 475
[TuB.48] FabricationandCharacterizationof3DScaffoldUsingSodiumAlginateandPoly(vinylalcohol)/JiMinSeok,JaeEunJeong,JunHeeLee,WanDooKim,SuAPark(KoreaInst.ofMachinery&Materials)/ 476
[TuB.49] Fabrication of Carbon Nano-micro Hybrid Pattern for ElectrochemicalCapacitorApplication /SoongeunKwon,SangheeJung,HyungjunLim,Geehong Kim, Keebong Choi, Sunghwi Lee, Jaejong Lee (Korea Inst. ofMachinery&Materials)/ 477
[TuB.50] Patterning Systems and Processes Using Semiconductor Laser Diodes /Hyungjun Lim (Korea Inst. of Machinery & Materials), Daekyeong Jung(Univ.ScienceandTechnology),GeehongKim,JaeJongLee,KeebongChoi,SoongeunKwon(KoreaInst.ofMachinery&Materials)/ 478
[TuB.51] FabricationofLarge-areaThree-dimensionalPlasmonicNanoarchitecturesbasedonRoll-to-rollNanoimprintingProcessand ItsApplicationtoLSPRBiosensors/ Jung-SubWi(KoreaResearchInst.ofStandardsandScience),SeungjoLee (SeoulNat’lUniv.ofScienceandTechnology),SungHoLee(Kyungpook Nat’l Univ.), Dong Kyo Oh, Jeong Dae Kim, Jae Hyuk Lee(SeoulNat’lUniv.ofScienceandTechnology),Kyu-TaeLee (InhaUniv.),InkyuPark (KoreaAdvanced Inst.ofScienceandTechnology),MoonKyuKwak(KyungpookNat’lUniv.),JongG.Ok(SeoulNat’lUniv.ofScienceandTechnology)/ 479
[TuB.52] User-customizedApplicationofRe-attachableMultidimensionalNanopatternsFabricated by Continuous Nanoinscribing and Low-temperature RollImprintingforFlexiblePhotonicandBiosensingDevices/DongKyoOh(SeoulNat’lUniv.ofScienceandTechnology),NguyenDangThuan(HanbatNat’lUniv.),SeungjoLee(SeoulNat’lUniv.ofScienceandTechnology),PyeongsamKo(HanbatNat’lUniv.),Gi-SeokHeo,Chang-HunYun,Tae-WonHa(KoreaInst.ofIndustrialTechnology),JaeHyukLee,JeongDaeKim(SeoulNat’lUniv.ofScienceandTechnology),HongseokYoun(HanbatNat’lUniv.),JongG.Ok(SeoulNat’lUniv.ofScienceandTechnology)/ 480
[TuB.53] LubricationEffectandPressureDistributionofSliderBearingwithRectangularWavedSurface/MoonChulYoon,Jong-DoKim,Do-HunChin(PukyongNat’lUniv.)/ 481
72
[TuB.54] High Speed Manufacturing ofTi6Al4V Components by Selective LaserMeltingProcess/KangpyoLee,KangminKim,SukhyunKang(KoreaInst.ofIndustrialTechnology),Chang-WooLee(KoreaInst.ofMachinery&Materials),KyunghwanJung(KoreaInst.ofIndustrialTechnology)/ 482
[TuB.55] DynamicModelandCharacteristicsAnalysisofHotRollingMillConsideringThermalLoad/HyunIkYang,HunBongLim(HanyangUniv.)/ 483
[TuB.56] AnalysisoftheRollHuntingForceDuetoHardnessinaHotRollingProcess/HunBongLim,HyunikYang(HanyangUniv.),ChangwanKim(KonkukUniv.)/ 484
[TuB.57] ChatterVibrationAnalysisfortheSpindleofaHotPlateMillbyUsingFlexibleMultibodyDynamics/HunBongLim(HanyangUniv.),JeawooPark,SangsooYu(HyundaiSteel),HyunikYang(HanyangUniv.),ChangwanKim(KonkukUniv.)/ 485
[TuB.58] High Precision and Low Cost Air Floating Plate for Flat Panel DisplayManufacturingEquipments/HyunWooKim,Sang-YeonCho,Woo-SeokSeol(KoreaAerospaceResearchInst.)/ 486
[TuB.59] TheExperimentalStudyontheAdhesiveStrengthofAluminumPouchbyFormingDepth/MinSookYu,Jung-MinCho,Mun-YongSong,Min-HaKim(TOPnCCo.,Ltd.),Dong-SooKim(HanbatUniv.)/ 487
[TuB.60] ABasicStudyontheThermallyAssistedMachiningbyMulti-heatSources/Wan-SikWoo,Choon-ManLee(ChangwonNat’lUniv.)/ 488
[TuB.61] NumericalStudyonThermalStressCuttingofSiliconWaferUsingTwo-lineLaserBeams/SunghoChoi,Kyung-YoungJhang(HanyangUniv.)/ 489
[TuB.62] OntheAdvancedMachiningTechnologyUsingCAD/CAE/CAM/Kyu-TaekHan(PukyongNat’lUniv.)/ 490
17:30~18:30 PosterSession(TuD) Chairs:Prof.Dong-KwonKim(AjouUniv.),Prof.JungchulLee(SogangUniv.)
[TuD.01] DevelopmentofRemoteHandlingEquipmentsforLarge-scaleRadiologicalR&DFacility/Il-JeCho,Hee-SuckKang,Sang-BokAhn(KoreaAtomicEnergyResearchInst.)/ 491
[TuD.02] DevelopmentofPrintedOrganicSolarCell (OSC) forEnergyApplication/HyunAhLee,DongSooKim(HanbatNat’lUniv.)/ 492
[TuD.03] ImprovementonExergyEfficiencyofThermalEnergyStorage inDistrictHeating/JoongYongYi(YujinEnergyConsultingCo.),KyungMinKim,MunSeiOh(KoreaDistrictHeatingCo.)/ 493
[TuD.04] Experimental Investigation on Combustion Characteristics of Internal
73
Emerging Technologies in Mechanical Engineering
Recirculation Inducing Burner / Daehae Kim (Korea Inst. of IndustrialTechnology),Min-JunKwon(HanyangUniv.),Sung-WooBae(ChonbukNat’lUniv.),Se-WonKim(KoreaInst.ofIndustrialTechnology)/ 494
[TuD.05] ImpactofLPGFuelandTurbochargedRight-sizingTechnologyonVehicularNanoparticleEmissionsfromGasolineDirectInjection(GDI)Vehicle/SeunghoAhn,JaehoCho,Cha-LeeMyung,SimsooPark(KoreaUniv.)/ 495
[TuD.06] Tailoring Multiscale Structures of Solid Oxide Fuel Cells via AdvancedElectrospray Deposition / Sung Soo Shin (Seoul Nat’l Univ.), JeonghunKim(Korea Inst.ofScienceandTechnology),GuangminLi,HyunhoShin(SeoulNat’lUniv.),JiwonSon,HyoungchulKim(KoreaInst.ofScienceandTechnology),MansooChoi(SeoulNat’lUniv.)/ 496
[TuD.07] EffectofPurgeFlowonHeatTransferonTurbineNozzlewithContouredEndwall/JeongJuKim,SehjinPark,MinhoBang,SeonHoKim,SuWonKim,HyungHeeCho(YonseiUniv.)/ 497
[TuD.08] EffectofHolePatternonFilmCoolingEffectivenessonBladeEndwall/SehjinPark,Ho-SeongSohn,JeongJuKim,InSeokLee,TaehyunKim,HyungHeeCho(YonseiUniv.)/ 498
[TuD.09] Enhancement of HeatTransfer of Shroud Block Using Impingement JetCooling/ InSeokLee,SehjinPark,MinHoBang,SangjaeKim,SeungyeongChoi,HyungHeeCho(YonseiUniv.)/ 499
[TuD.10] MultiscaleStructuredMembranesforHigh-performanceProtonExchangeMembraneFuelCells(PEMFC)/JiwooChoi(SeoulNat’lUniv.),SeguenJang(KoreaInst.ofScienceandTechnology),SangmoonKim(IncheonNat’lUniv.),MansooChoi(SeoulNat’lUniv.)/ 500
[TuD.11] CarbonApproachesasaCost-effectiveSolutionforFlexiblePerovskiteSolarCells/HeetaeYoon,JungjinYoon,MansooChoi(SeoulNat’lUniv.)/ 501
[TuD.12] ProductionofAnimalFatandVegetableOilBlendedBiodiesels/Tae-HanKim,Duk-gamWoo(KyungpookNat’lUniv.)/ 502
[TuD.13] TechnologyofUsingBlendedBiodieselsforaPowerTillerEngine/DukGamWoo,Tae-HanKim(KyungpookNat’lUniv.)/ 503
[TuD.14] A Parametric Study ofThermoelectric Generator System under LowTemperatureGradientCondition/Sung-HoonJung,DongsooJung,Joo-HyungKim(InhaUniv.)/ 504
[TuD.15] GTDCharacteristicofMixedRefrigerantforOceanThermalEnergyConversion(OTEC)/Kyeong-HoShin,Da-MinShim,Tae-JinLee,Jun-suLee(InhaUniv.),Sang-hyupLee(ResearchInst.ofKoreaElectricPowerCorportaion),DongsooJung,Joo-HyungKim(InhaUniv.)/ 505
[TuD.16] DevelopmentofSimulationandDemonstrationSystemsforTeleoperated
74
MaterialHandlingTasks/Seung-NamYu,Dong-SukRyu,Jong-HuiHan,Hyo-JikLee(KoreaAtomicEnergyResearchInst.)/ 506
[TuD.17] FrictionModelingforAccurateEstimationofExternalTorque/Kuk-HyunAhn,Jae-BokSong(KoreaUniv.)/ 507
[TuD.18] FaultTolerantTeleoperationControlbasedonSelf-recoveryMethodologyinHeterogeneousMaster-SlaveSystems/ JaesungKwon,WoosungYang(KwangwoonUniv.)/ 508
[TuD.19] UnifiedSynthesisofSpatialMechanismforPathGeneration/JungRyeolHong,HongHeeYoo(HanyangUniv.)/ 509
[TuD.20] ComputedTorqueControlofHexapodRobotforUnevenTerrain/ Baek-KyuCho,Won-sukJi(KookminUniv.),Seong-yeolYoo(KeimyungUniv.)/ 510
[TuD.21] ReinforcementLearningbasedSelf-balancingQuadrupedRobot/CheonghwaLee,DawnAn(KoreaInst.ofIndustrialTechnology)/ 511
[TuD.22] TheFeasibilityStudyofBoronNitrideNanotubeforEco-friendlyPiezoelectricSmartComposites/BaekGyuChoi,SungYongKim,InhyukKang(PukyongNat’lUniv.),HoonHuh(Korea Inst.of IndustrialTechnology),JaewooKim(NaieelTechnology),Young-SooSeo(SejongUniv.),InpilKang(PukyongNat’lUniv.)/ 512
[TuD.23] Master-slaveManipulatorsAppliedtoR&DTestFacilitiesofKAERI/KihoKim,Jeong-YongPark(KoreaAtomicEnergyResearchInst.)/ 513
[TuD.24] Path Compensation of a Maintenance Robot to Improve the Quality ofChippingonReinforcedConcreteBoxCulverts/JaeukCho,JoonsooJun,SeungyeolLee(DaeguGyeongbukInst.ofScienceandTechnology)/ 514
[TuD.25] AStudyonKinematicandControl fortheWheelchairStorageSysteminaSedanTrunk/Young-JaeKim,TaeunKim,YongsukKim,SoonyongYang(Univ.ofUlsan)/ 515
[TuD.26] AEBSPerformanceEvaluationinOffsetCollisionSituationUsingLowplatformTarget Robot / Seohang Lee, Sanghyeop Park, Beenhui Lee, Jayil Jeong(KookminUniv.)/ 516
[TuD.27] AdvancesinGlazingRobotsfromaTeleoperatedSystemtoaHuman-robotCooperativeSystem/SeungyeolLee(DaeguGyeongbukInst.ofScienceandTechnology)/ 517
[TuD.28] DevelopmentofQRCodeRecognitionLogisticsRobotwithTargetErrorof10mmorLessforSmartFactoryConstruction/JeongickLee(InhaTechnicalCollege)/ 518
[TuD.29] Modeling,ControlandEstimationFrameworkfortheSoftRobot/JaeminYoon,Jun-YoungPark,Dong-JunLee(SeoulNat’lUniv.)/ 519
[TuD.30] FishingLineSpringbasedBiomimetryTendonforConcealedAnkleBrace/
75
Emerging Technologies in Mechanical Engineering
SeungJunLee(IncheonNat’lUniv.),SeunghunLee(KoreaAdvancedInst.ofScienceandTechnology),SanghunJung,HyunhoKim,YeongJinKim,SangheeLee(IncheonNat’lUniv.)/ 520
[TuD.31] DevelopmentofaDistinguishAlgorithmforTrackingControlbasedonConvergenceof1-LayerLaserScannerandSingleCamera/HyeWonLee,TaeJunSong,Kwang-seokOh(HankyongNat’lUniv.)/ 521
[TuD.32] DevelopmentofanAlgorithmfor1-LayerLaserScannerbasedTrackingControlofAutonomousTruckUsing1-WheelDrivingModule/TaeJunSong,HyeWonLee,Kwang-SeokOh(HankyongNat’lUniv.)/ 522
[TuD.33] MicrofluidicDiodeUsingComb-shapedMovingPlugforRectifyingUltra-lowReynoldsNumberFlows/JiniHyeon,HongyunSo(HanyangUniv.)/ 523
[TuD.34] MaterialPropertyMeasurementUsingaSurfaceWavebyCMUT(CapacitiveMicromachinedUltrasonicTransducer)RingArray/SooWonKwon,HyeongGeunJo,KwanKyuPark(HanyangUniv.)/ 524
[TuD.35] CharacterizationofRapidCuringSystemsontheEpoxyResinProperties/JinwookJeong,JongSungWon,WonGiJo,SeungGooLee(ChungnamNat’lUniv.)/ 525
[TuD.36] StudyontheChangeofPhysicalPropertiesofPPSAccordingtoRheology/HyeonSooLim,JongSungWon,SangHoonLee(ChungnamNat’lUniv.),JiYunKim(HuvisCorporation),SeungGooLee(ChungnamNat’lUniv.)/ 526
[TuD.37] Study on the Aging Mechanism and Mechanical Properties of RubberO-ringsUsingtheThermo-oxidativeAcceleratedAgingTest/SeobinEom,SunyoungLee(ChungnamNat’lUniv.),SeongHanPark(AgencyforDefenseDevelopment),SeunggooLee(ChungnamNat’lUniv.)/ 527
[TuD.38] AnalysisforAnisotropicTemperatureChangeofMetamaterial/JaekeunYoon,Young-WookLim,DongchoulKim(SogangUniv.)/ 528
[TuD.39] AnalysisoftheEffectofFoldingDeformationandTensile/CompressionoftheMaterialontheDeformationoftheFoldingShapeStructuresUndertakingExternalLoad/JongHyeokJeon,SungMinKim,HongSeokLim(DonggukUniv.)/ 529
[TuD.40] StudyonthePropertiesofUnidirectionalCarbonFiber/EpoxyCompositesAccordingtoStackingSequencebeforeandafterHoleMachining/SeonWoongKoo,JongSungWon,HaRamLee(ChungnamNat’lUniv.),JuYoungYoun(WooyangAdvancedMaterialCo),SeungGooLee(ChungnamNat’lUniv.)/ 530
[TuD.41] AcousticPerformanceofLarge-areaCrumpledGrapheneFilms/MyeongHeeJeong,JiWonSuk(SungkyunkwanUniv.)/ 531
[TuD.42] ParticleFocusingandSeparationbySwitchingTemperatureGradientswithin
76
aShortRangeofMicrochannels/WooyeongLim,KyunghunLee,Gun-hoKim,TaesungKim(UlsanNat’lInst.ofScienceandTechnology)/ 532
[TuD.43] AnalysisandApplicationofFillingMaterial inMicrospeakerBoxtoImproveSPL inLowFrequency /Yuan-WuJiang (PusanNat’lUniv.),Dan-PingXu(ShanghaiUniv.),Jun-HyungKim,Sang-MoonHwang(PusanNat’lUniv.)/ 533
[TuD.44] AnalysisandDesignofHelmholzProtectorusedinInsertEarphone/Yuan-WuJiang(PusanNat’lUniv.),Dan-PingXu(ShanghaiUniv.),Jun-HyungKim,Sang-MoonHwang(PusanNat’lUniv.)/ 534
[TuD.45] FabricationofSelf-propelledSiliconeMicrotubeviaDipCoatingMethod/Nae-UnKang,HeeKyeongKim,Seung-JaeLee,KyoungDuckSeo(WonkwangUniv.)/ 535
[TuD.46] TheEffectofHighShearRateProcessingonPVDF/PARBlendProperties/WoojinOh,JongSungWon,HyeonSooLim,SongHeeKang,SeungGooLee(ChungnamNat’lUniv.)/ 536
[TuD.47] FabricationofFlexibleandTransparentElectronicsUsingLow-temperatureLaserProcessingandAcidTreatmentofCuNanoparticle/YeosangYoon,JinhyeongKwon,HyunminCho,SeungHwanKo(SeoulNat’lUniv.)/ 537
[TuD.48] HighPerformance,Transparent,ReusableAirFilterbyHierarchicalSilverNanowireNetwork/SeonggeunHan(SeoulNat’lUniv.),SeongminJeong(KoreaResearchInst.ofChemicalTechnology),HyunminCho,SeunghwanKo(SeoulNat’lUniv.)/ 538
[TuD.49] Skin-mountableMultichannelSurfaceElectromyographySensor/NamyunKim,JonghoLee(GwangjuInst.ofScienceandTechnology)/ 539
[TuD.50] TruncatedDropImpactonaSolidforReductionintheBounceMagnitude/SungchanYun(KoreaNat’lUniv.ofTransportation)/ 540
[TuD.51] Mat-shaped FlexibleThermoelectric System based on Bulk Materials /HwanjooPark,DongkeonLee,DonggyuKim,YoominEom,WoochulKim(YonseiUniv.)/ 541
[TuD.52] TheThermalConductivityCharacterizationasaFunctionoftheStrain/AghaAamir,DaewooSuh,SeonghyunBae,SeunghyunBaik(SungkyunkwanUniv.)/ 542
[TuD.53] ANovelFabricationof3.6nmHighGrapheneNanochannelsforUltrafastIonTransport/WonsukJung(ChungnamNat’lUniv.)/ 543
[TuD.54] 3DPrintingProcessResearchforSurfaceRoughnessAccordingtoLaminationMethodofPhoto-sculpture/YoungSuKim,Kyung-hwanKim,Kyung-hyunChoi(JejuNat’lUniv.)/ 544
[TuD.55] Fabricationof IntestineOrganoidvia3DCellPrintingSystem/JunjieYu(KoreaInst.ofMachinery&Materials),Cho-RokJung(KoreaResearchInst.of
77
Emerging Technologies in Mechanical Engineering
BioscienceandBiotechnology),HailiJeon,SangHyunAhn,SuAPark,WanDooKim,JunHeeLee(KoreaInst.ofMachinery&Materials)/ 545
[TuD.56] DevelopmentofMetal3DPrintingProcessbasedonMaterialExtrusion/YewonJung,Min-kyuKim,SuAPark,Wan-DooKim,Chang-WooLee,JunHeeLee(KoreaInst.ofMachinery&Materials)/ 546
[TuD.57] AStudyonOptimalProcessandImprovementofAccuracybyUsingBinderJettingProcesswithSpecialCastingSandPowderBase/HaeJeongKim,SugiuraKuniaki,HyunjunAhn,YeabinMoon,SungwooBae(SENTROLCo.,Ltd.)/ 547
[TuD.58] CharacteristicsofCompositeMetals for3DPrintedElectronics/YongSukYang,HyunwooDang,BonjinKoo,KyusungLee,KyunghyunKim,JiyoungOh(ElectronicandTelecommunicationsResearchInst.),ChangwooLee(KoreaInst.ofMachinery&Materials)/ 548
[TuD.59] AStudyonEnvironmentallyFriendlyandMechanicalPropertiesofBio-basedPCforApplicationofFDM3DPrinting/JiEunLee,SeongjePark,JeanhoPark(KoreaInst.ofIndustrialTechnology),SunchulJin,KiyongKim(SamyangCo.),YongSon(KoreaInst.ofIndustrialTechnology)/ 549
[TuD.60] EffectofLaserRe-meltingProcessingParameterstoFabricateHighDensityCommercialH13ToolSteelsbySelectiveLaserMelting/JaecheolYun,JunghoChoe,Dong-YeolYang,SangsunYang,Yong-JinKim(KoreaInst.ofMaterialsScience),Chang-WooLee(Korea Inst.ofMachinery&Materials),Ji-HunYu(KoreaInst.ofMaterialsScience)/ 550
[TuD.61] MechanicalandElectricalBehaviorsof3DPrintedStrainGauge/HongguenPark,Min-WooKim,Jong-GyuKim,Sun-KonLee,Joo-HyungKim(InhaUniv.)/ 551
[TuD.62] DevelopmentofPowderBedFusion3DPrinterforBiomedicalApplication/EmmanuelKokloku,Dong-SooKim(HanbatNat’lUniv.),Min-HaKim(TOPnCCo,.Ltd)/ 552
[TuD.63] Studyon thePowderBedFusion3DPrinterandOptimizationSinteringProcessforSUSMaterials/MinHaKim(TOPnCCo.,Ltd.),KoklokuEmmanuel,Dong-SooKim(HanbatNat’lUniv.)/ 553
[TuD.64] Visualization of Defect andTensile Behavior in Extrusion AdditiveManufacturingUsingInfraredThermography/Gwang-WookHong,SunKonLee,Eun-HyunKim,Sang-LokPark,Joo-HyungKim(InhaUniv.)/ 554
78
August 22 (Wed.)
Lobby, 2F
12:15~13:00 PosterSession(WeC) Chairs:Prof.HyunsuKim(Dong-EuiUniv.),Prof.YounhoCho(PusanNat’lUniv.)
[WeC.01] DevelopmentofaVoice-activatedHigh-performanceHairDryer/Da-MiYu,Lae-HyongKang(ChonbukNat’lUniv./LANL-CBNU)/ 555
[WeC.02] FabricationofFilm-typeDual-bandFrequencySelectiveStructure /SunHongYoon, Hyun-Ho Park (Korea ElectronicsTechnology Inst.), Jun Lee(Aramsolution)/ 556
[WeC.03] Developmentofan8-AxisAssemblyWorkstationforIntuitiveRobotTeachingbyHumanMotionRecognitionandImitation/KeebeomPark,SujeongBaek,DuckYoungKim(UlsanNat’lInst.ofScienceandTechnology)/ 557
[WeC.04] Driver Intent Inferencefor In-vehicleEquipmentControl/MyoungGuLee(DaekhonCorporation),InhakLee,SangHunLee(KookminUniv.)/ 558
[WeC.05] DesignofanElectricAdhesiveGrippertoHoldVariousObjects/JeongseokKim,BongsubSong,DongwonYun(DaeguGyeongbukInst.ofScienceandTechnology)/ 559
[WeC.06] DevelopmentofModularizationSystembasedonOpenSourceHardwareUsingIoTTechnology/JungWooKim,EunjiLee,WanshiJin,SanghunSul,JaeboongChoi(SungkyunkwanUniv.)/ 560
[WeC.07] A Study on High Efficiency Heat InsulationTechnology for ProtectedHorticultureUsingAerogels/Hyung-KweonKim,Young-SunRyou,Geum-ChoonKang,Young-HwaKim,Tae-SeokLee,Byung-OkJin,Sung-SikOh(NationalInst.ofAgriculturalSciences)/ 561
[WeC.08] Study onVarious Metal Catalysts as Solid Oxide Electrolysis Cells FuelElectrodeMaterialunderCo-electrolysisEnvironment/YoungjinKwon(KoreaMilitaryAcademy)/ 562
[WeC.09] AnExperimentStudyonEffectsofCurrentDensityonVoltageDegradationinPEMFCNEDCDriving/JaesuHan,JaeyoungHan,SangseokYu(ChungnamNat’lUniv.)/ 563
[WeC.10] Influence of Morphology on Advanced Battery-type Electrode forSupercapatteryApplications/SuChanLee,YounghoSeo,KalimuthuVijayaSankar,SeongChanJun(YonseiUniv.)/ 564
[WeC.11] ApplicationofaNeuralNetworkintheDesignofaSoundAbsorberforHigh-pressureMotors/ByeongyoonMoon(HyundaiElectric),Dae-SeongCho
79
Emerging Technologies in Mechanical Engineering
(PusanNat’lUniv.),Sun-WooKwon(UlsanUniv.)/ 565[WeC.12] Design2-speedTransmissionforCompactElectricVehicleUsingDualDisc
Brake/JaeohHan,Jae-WonShin,Jae-ChangKim,Soo-YoungLee,Se-HoonOh(Chung-AngUniv.)/ 566
[WeC.13] AStudyonHalbachArraybasedTubularLinearGeneratortoHarvestEnergyfromPneumaticJackhammers/ JoonsooJun, JaeukCho,SeungyeolLee(DaeguGyeongbukInst.ofScienceandTechnology)/ 567
[WeC.14] Study on Eddy Current Loss Reduction Methods of a Magnetic Gear /SungwooChang,SeungyeolLee (DaeguGyeongbuk Inst.ofScienceandTechnology)/ 568
[WeC.15] VehicleSpeedControlwithNeuralNetworkandErrorCompensator/ChanhoPark,GisungGwak,Sung-HoHwang(SungkyunkwanUniv.)/ 569
[WeC.16] AccidentScenarioSimulationofAEBSVehicleUsingVirtualTestBed/Been-huiLee,SeohangLee,SanghyeopPark,JayilJeong(KookminUniv.)/ 570
[WeC.17] MultiscaleSimulationofEUVResistFabricationonPEBProcessConsideringtheEffectofQuencher/HyungwooLee,MuyoungKim,JunghwanMoon,Sungwoo Park (Seoul Nat’l Univ.), Byunghoon Lee, Changyoung Jeong(SamsungElectronicsCo.,Ltd.),MaenghyoCho(SeoulNat’lUniv.)/ 571
[WeC.18] FEA(FiniteElementAnalysis)RailwaySleepersbyUsingFRP(FiberReinforcedPlastic)/SungHyunBae,JoongYeonLim(DonggukUniv.)/ 572
[WeC.19] AnalysisofRubberSpringCharacteristicsUsingFiniteElementMethod/HyeongukMun (SungkyunkwanUniv.), JongdukChung (KoreaRailroadResearchInst.),MyungwonSuh,NaktakJeong(SungkyunkwanUniv.),Kee-JunPark(KoreaRailroadResearchInst.),Jung-HwanLee(OsanUniv.),HoyongLee(KoreaRailroadResearchInst.)/ 573
[WeC.20] Development of Equivalent Model of the BoltTightened in ComplexStructuresthroughClampingandLooseningAnalysis/HeeRokHong,JongDukChung(KoreaRailroadResearchInst.),MyungWonSuh(SungkyungkwanUniv.),HoYonglee(KoreaRailroadResearchInst.)/ 574
[WeC.21] AStudyon InjectionMoldDesignofReverseEngineeringUsing InjectionMoldingAnalysisandMachineLearning/SoonhwanHwang(ED&C,Ltd.),JongsunKim(KoreaInst.ofIndustrialTechnology)/ 575
[WeC.22] Design Optimization of Steel/Polymeric Composite Gears ConsideringStrength andVibration Characteristics / Hyun-Woong Kim, Cheol Kim(KyungpookNat’lUniv.)/ 576
[WeC.23] Characteristic Length of Double Bolted E-glass/Epoxy Composite withClampingForce/HaeseongKang,HeongJaeChun,ByeongJunPak(YonseiUniv.),JongChanPark,HongSeokJang(HyundaiMotorsGroup)/ 577
80
[WeC.24] CharacteristicLengthofCompositeBoltedJointunderClampingTorque/YoungChanJung,HeoungjaeChun,JaeilChoi(YonseiUniv.),HongseokJang,JongchanPark(HyundaiMotorGroup)/ 578
[WeC.25] Yielding Behaviors by Screw Dislocations at High Strain Rates in SingleCrystalline BCCTantalum: Dislocation Dynamics Study / Sunil Moon,KeonwookKang(YonseiUniv.)/ 579
[WeC.26] 3DFEM-brandVisualAnalyticsbasedonBigdata/SangHunSul,JungWooKim,WanshiJin(SungkyunkwanUniv.)/ 580
[WeC.27] ImplementationofMentoringSysteminCollegeforSmoothTransitiontoWork/Ju-hyunJeon(Chung-AngUniv.)/ 581
[WeC.28] ClearanceFitTrainingProgramforMachineAssemblyToleranceSelectionbyUsingTangibleThingsandQuizGames/Sung-JinOh,Dong-WookKwak,Jae-MinKim,HuSeungLee(ChungnamNat’lUniv.)/ 582
[WeC.29] DesignMethodofRotationallySymmetricDrilled-holeMetamaterialforThree-dimensionalElectromagneticCloak/YongjuneKim,BoyoungKang,Hak-JooLee(CenterforAdvancedMeta-Materials),YongshikLee(YonseiUniv.),Cheng-WeiQiu(Nat’lUniv.ofSingapore)/ 583
[WeC.30] GeneratingMultimodalInterferenceUsinganAnisotropicMetamaterialCavitytoAchieveVariousElasticWaveModeConversion/JoshuaMinwooKweun,XiongweiYang,YoonYoungKim(SeoulNat’lUniv.)/ 584
[WeC.31] VibrationMetamaterialforRadiatedNoiseReduction/ ChanghoonAhn,JinWooLee(AjouUniv.)/ 585
[WeC.32] ElectromagneticSelectiveEmitterMetamaterial forThermophotovoltaicApplication/FekaduTolessaMaremi,NamkyuLee,JoonsooLim, InjoongChang,HyungheeCho(YonseiUniv.)/ 586
[WeC.33] Strain- and Stress-based Path Independent Forming Limit Criteria forZirconiumAlloySheet/MinsooKim(SogangUniv.),SeokmooHong(KongjuNat’lUniv.)/ 587
[WeC.34] PressureSensitiveElastomericFilmwithHair-likeSurfaceNanostructures/KwanohKim,EunjuYeo,MinheeSon,JaeSungYoon,Yeong-EunYoo,JeongHwanKim,Doo-SunChoi(KoreaInst.ofMachinery&Materials)/ 588
[WeC.35] EffectofSizingAgentsofCarbonFibersonFlowCharacteristicsofEpoxyResins/SuhyunLim,Seung-YoonOn,Seong-SuKim(KoreaAdvancedInst.ofScienceandTechnology)/ 589
[WeC.36] CharacterizationofUVPhotopatternableGnF/SU-8Composite/SeungpyoWoo,SungminPark,YoungChoi,SangheonPark,Sang-HeeYoon(InhaUniv.)/ 590
[WeC.37] AnOptimizedReverse-contactandRotated/RampedUVLithographyforthe
81
Emerging Technologies in Mechanical Engineering
FabricationofSharp-tipped,High-aspect-ratioMicroneedles/SungminPark,SeungpyoWoo,YoungChoi,SangheonPark,Sang-HeeYoon(InhaUniv.)/ 591
[WeC.38] Determination and Evaluation of Cohesive Element Parameters for theProgressive Delamination Analysis / DonghyunYoon, Sanghyun Hong,JaehoonKim(ChungnamNat’lUniv.),YoungdaeDoh(AgencyofDefenseDepartment)/ 592
[WeC.39] EvaluationofLowCycleFatigueDamageofNickelSuperalloybyHoldingTime/InkangHeo,Dong-HyunYoon,Jae-HoonKim(ChungnamNat’lUniv.),Sung-HoChang,Si-YeonBae(KEPCOResearchInst.)/ 593
[WeC.40] MixedMode(I+II)FatigueCrackGrowthBehaviorofPowderMetallurgyNickelbasedSuperalloyforTurbineDiscs/SanghyunHong,DonghyunYoon,InkangHeo,JaehoonKim(ChungnamNat’lUniv.)/ 594
[WeC.41] ProbabilisticAnalysisforMechanicalPropertiesofPlain-weaveCarbon/EpoxyCompositeUsingMulti-scaleHomogenizationandMonteMarloSimulation/Byung-WookJeon,Chan-WoongChoi(KunsanNat’lUniv.),Seung-PyoLee(ILJINGlobal),Ki-WeonKang(KunsanNat’lUniv.)/ 595
[WeC.42] DeterminationofEffectivePoreSizeofaPorousMembrane through itsHydraulicCharacteristics/NguyenThiPhuong(Korea Inst.ofMachinery&Materials),GeonheeLee(ChungnamNat’lUniv.),KwanohKim,JeongHwanKim,Doo-SunChoi,Yeong-EunYoo,JaeSungYoon(KoreaInst.ofMachinery&Materials)/ 596
[WeC.43] EnhancementofAnalyticalSolutionofDoubleTorsionTestUsingFiniteElementTechniques/KaruppasamyPandianMarimuthu,KwangminLee,HyungyilLee(SogangUniv.)/ 597
[WeC.44] SuppressionEffectofIntermetallicCompoundsLayeronSolderJointsthroughAdditionGrapheneNanosheets/MinSooKang,Do-SeokKim,Young-EuiShin(Chung-AngUniv.)/ 598
[WeC.45] Studyof theEnvironmentalQualificationMethodofNon-metallicPartsinMechanicalEquipmentbyComparing IEEEStd323andASMEQME-1Standards/KyungheumPark,Han-SooKim,Tae-GuLee(KoreaHydroandNuclearPowerCo.),Phil-SunKang(SoosanEngineering&Service)/ 599
[WeC.46] AStudyofLowCycleFatigueforDuplexStainlessSteel/Il-HeonJeong,Chi-HwanKim(PusanNat’lUniv.),Chang-WonKang(ResearchInst.ofWhayoungCo.Ltd.),Tae-GyuKim(PusanNat’lUniv.)/ 600
[WeC.47] StudyofCoolingPerformancebyMagnetoconvectionEffects inVegetableTransformerOilwithMagneticNanoparticles/Ho-YoungLee(ChangshinUniv.)/ 601
[WeC.48] ComparisonofWeldabilityandStrengthofWeldedPart forVariousHigh
82
HardnessArmorSteel/YoungcheolJeong(ChangwonNat’lUniv.),SeungjunLee,YongmunJung,CheolsuPark,ByungsukLee (Hanwhalandsystems),TaewonPark,HonggyuKim(AgencyforDefenseDevelopment),YoongyoJung,YoungtaeCho(ChangwonNat’lUniv.)/ 602
[WeC.49] NonlinearityStudyofAluminumPlateandEngineValveSpringCoilwithPlasticDeformationbyBending/JeongnamKim,YongheeLee,BoZhu(PusanNat’lUniv.),SeongtaeYun(KoreaAerospace Industries,Ltd.),YounhoCho(PusanNat’lUniv.)/ 603
[WeC.50] Influence of UNSM on theTribological Performance of Cr3C2 CoatingDeposited onto SCMN439 Steel byThermal Spray Method / UmarovRakhmatjon,AmanovAuezhan(SunMoonUniv.)/ 604
[WeC.51] ComparisonofKSandGBStandardHeatTreatmentforMechanicalPropertiesofA356-T6/ChangHwanYang(PusanNat’lUniv.),SangmokKim(HyosungCorporation),SeonghunPark(PusanNat’lUniv.)/ 605
[WeC.52] TheEffectofOxidationTimeontheMechanicalPropertiesofZirconiumAlloy/TaehoKim(UlsanNat’lInst.ofScienceandTechnology),KyoungJoonChoi(KoreaBasicScienceInst.),SeungChangYoo,YunjuLee,JiHyunKim(UlsanNat’lInst.ofScienceandTechnology)/ 606
[WeC.53] PeridynamicGhost InterlayerModel forDynamicFracture inMultilayeredComposites/TaeSickAn,YounDohHa(KunsanNat’lUniv.)/ 607
[WeC.54] StudyonOptimizationofDrawingProcessbyDrawingSimulation/SeokbaeLee (KoreaTesting&Research Inst.),YoungjinSeo (KumohNat’l Inst.ofTechnology),MinwooJeon(KoreaTesting&ResearchInst.)/ 608
[WeC.55] StudyonElectrical,StructuralandMechanicalCharacteristicsofAl-dopedSnOxThinFilmsforTransparentThinFilmTransistorFabricationonFlexibleSubstrate/Seung-HunLee,KiHwanKwon,KwanohKim,JaeSungYoon,Doo-SunChoi,Yeong-EunYoo,JeongHwanKim(KoreaInst.ofMachinery&Materials)/ 609
[WeC.56] ApplicabilitytoRailwayVehiclesofInternalEnvironmentalMonitoringSystembasedonInternetofThings/HeonyoungKim(YonseiUniv.),DonghoonKang(KoreaRailroadResearchInst.)/ 610
[WeC.57] Multi-purposeOptimizationforImprovingBendingStrengthofFrontandSideofOpenSection/Dong-SeokShin,Euy-SikJeon(KongjuNat’lUniv.)/ 611
[WeC.58] UIC513basedMainAirCompressorVibrationInfluenceContributionStudy/MinkyungKim(KORAIL),ChulsooKim(UiDepartmentofRailwayVehicleSys.Eng.),YounggeunLee,SeunggonKim,SunghwaYang,JunhyunPark(KORAIL)/ 612
[WeC.59] VibrationAnalysisofHydraulicSwitchforHigh-speedRailwayTurnoutSystem
83
Emerging Technologies in Mechanical Engineering
/WonheeYou,TaehwanKo,MancheolKim(KoreaRailroadResearchInst.)/ 613[WeC.60] AStudyontheDurability ImprovementofGangwaySystemsforRailway
VehiclesUnderMixedModeBlockFatigueLoading/ SangjunPark,Chul-SuKim(KoreaNat’lUniv.ofTransportation)/ 614
[WeC.61] ModelPredictiveSteeringControlAlgorithmofanAutonomousTruckwithPhysicalConstraintsUsing1-WheelDrivingModule/KwangseokOh,TaejunSong,HyewonLee(HankyongNat’lUniv.)/ 615
[WeC.62] GenerationofAirborneWearParticlesattheWheel-railContact/HyunWookLee(KoreaRailroadResearch Inst.),Hyeong-GyuNamgung(KoreaDistrictHeatingCo.),Soon-BarkKwon,YoungGonLee(DAPInc.)/ 616
[WeC.63] AStudyonOutputCharacteristicsAccordingtoChange-overConditionofGasTurbine-propulsionMotorofHybridPropulsionSystem/Jae-HeeJang,Hun-SeokLee,MinwookKim,Jin-SeokOh(KoreaMaritimeandOceanUniv.)/ 617
[WeC.64] AVibrationalSignalProcessingMethodforDetectionandDiagnosisofWheelFlats inRailwayVehicles/GeoYoungKim,ByungJinCho,JeongSeoKoo(SeoulNat’lUniv.ofScienceandTechnology)/ 618