Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
Page 65
MC602S
Page 66 Page 67 Page 69
Page 70 Page 71 Page 72 Page 73
Page 74 Page 75
MC603S MC031V MC054V RC
MC605V/D MC601V MC609V RC MC610V RC/MC611V RC
MC612V D RC MC613V D RC
North American Products
63 64
6m
3m
Detection area
100% 2m 2.5m75 % 1m 1.5m50 % 0.5m 1m10% 0m 0.5m
2.5m2m
Microwave Motion Sensor�Microwave Motion Sensor�
Detection Pattern (max / min)
SPECIFICATIONS
MC602S ON-OFF Function / Enhanced Detection Zone
Detection Pattern (max / min)
5 Year Guarantee
5 Year Guarantee
SPECIFICATIONS
MC603S ON-OFF Function / Economical VersionON/OFF function
5 Year Guarantee
5 Year Guarantee
ON/OFF function
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
200W@120Vac 400W@277Vac (ballast) 400W@120Vac 800W@277Vac(resistive)
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
200W@120Vac 400W@277Vac (ballast) 400W@120Vac 800W@277Vac(resistive)
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
8m Max.
12m
5s/30s/90s/3min/20min/30min
N/A
N/A
5lux/15lux/30lux/50lux/100lux/Disable
-35℃~70℃
IP20
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
6m Max.
6m
5s/30s/90s/3min/20min/30min
N/A
N/A
2lux/10lux/25lux/50lux/ disable
-25℃~60℃
IP20
Daylight threshold Daylight threshold
Driver
LN
Driver
NL
LN
12m
3m
Detection area
100% 3m 4m75 % 2m 2.5m50 % 1m 2m25% 0.5m 1m
3m 4m
65 66
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
Linear & battenWall light High bay & low bay Wall light
Normal motion detectingNormal motion detecting
North American Products
North American Products
Microwave Motion Sensor�
SPECIFICATIONS
MC031V IP65 Microwave Motion Sensor For Warehouse
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
MC031V A MC031V B
MC031V C MC031V D
5s/30s/90s/3min/20min/30min
5s/5min/10min/30min/60min/+∞
120/277Vac,50/60Hz
5.8GHz±75MHz, ISM wave band
<0.5mW
≤1W(stand-by)
8m
15m
Sensor: 10%/20%/30%/50%
Sensor: 50lux/100lux/200lux/disable
-35℃~55℃
IP65
Microwave Motion Sensor�
Detection Pattern (max / min)
5 Year Guarantee
5 Year Guarantee
Step dimming
10%
100%
t2t0 t1
Daylight threshold
MC031V A
1-10V dimmable control gearLoad
BrownL in
Yellow L out
Blue N Red +
Black-
~220-240VAC
MC031V B1-10V dimmable control gear
Load
BrownL in
Yellow L out
Blue N Red +
Black-
~220-240VAC
1-10V dimmable control gearLoad
BrownL in
Yellow L out
Blue N Red +
Black-
~220-240VAC
MC031V C
MC031V D
1-10V dimmable control gearLoad
BrownL in
Yellow L out
Blue N Red +
Black-
~220-240VAC
IP65
MC031V A/MC031V B/MC031V CMC031V D
120Vac 4A electronic/magnetic ballast 277Vac 3A electronic/magnetic ballast
15m
3m
Detection area
100% 3.5m 4.5m50 % 2m 3m
4.5m3.5m
67 68
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
High bay & low bayLinear & batten
Normal motion detecting1-10V
1-10V
1-10V
1-10V
North American Products
North American Products
Microwave Motion Sensor�Microwave Motion Sensor�
Detection Pattern (max / min)
SPECIFICATIONS
1-10V dimmable control gearLoad
BrownLin Yellow Lout
Blue N Red +
Bla
ck-
120-277Vac
1-10V
MC054V RC Dimming Function / Remote Control Microwave Sensor
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
5 Year Guarantee
5 Year Guarantee
Sensor:5s/30s/1min/3min/20min/30minRemote control: 5s/30s/1min/3min/5min/10min/20min/30min Sensor:0s/1min/3min/10min/30min/∞Remote control: 0s/10s/1min/3min/5min/10min/30min/+∞
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
<1W(stand-by)
8m Max.
15m
Sensor:10%/20%/30%/50%
Sensor:5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~55℃
IP65
Detection Pattern (max / min)
Step dimming
10%
100%
t2t0 t1
Daylight threshold
MC054V A/MC054V B/MC054V C
MC054V D
MC054V RC A MC054V RC B
MC054V RC C MC054V RC D
IP65
SPECIFICATIONS
MC605V/DDimming Function/ Detachable VersionFor LED Tri-proof Light & LED Batten
DDD
1-10V Dimmable LED Driver1-10V Dimmable LED Driver1-10V Dimmable LED Driver
1-10V Dimmable LED Driver1-10V Dimmable LED Driver1-10V Dimmable LED Driver
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
4m Max.
8m
10%/20%/30%/50%
5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~70℃
IP20
5s/30s/90s/3min/20min/+∞
0s/5s/5min/10min/30min/1h/∞
5 Year Guarantee
5 Year Guarantee
Step dimming
10%
100%
t2t0 t1
Daylight threshold
120Vac 4A electronic/magnetic ballast 277Vac 3A electronic/magnetic ballast
Load
Load
8m
Detection area
100% 2m 2.5m75 % 1m 1.5m50 % 0.5m 1m25% 0m 0.5m
3m
2m 2.5m
15m
3m
Detection area
100% 2m 3.5m50 % 1m 2m
3.5m2m
69 70
MH01
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
120Vac: 4A Electronic/magnetic ballast277Vac: 3A Electronic/magnetic ballast
Linear & batten
Linear & battenHigh bay & low bay
Normal motion detectingNormal motion detecting
North American Products
North American Products
15m
3m
Detection area
100% 2m 3.5m50 % 1m 2m
3.5m2m
Microwave Motion Sensor�
Detection Pattern (max / min)
Microwave Motion Sensor�
Detection Pattern (max / min)
SPECIFICATIONS
MC601VNorth American Version / Dimming Function
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
400W@120Vac(Ballast) ,1000W@277Vac(Ballast) 800W@120Vac(Resistive),1000W@277Vac(Resistive)
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
12m
5s/30s/90s/3min/20min/+∞
0s/5s/5min/10min/30min/1h/disable
10%/20%/30%/50%
2lux/5lux/10lux/25lux/50lux/100lux/disable
-35℃~70℃
IP20
8m Max.
Step dimming
10%
100%
t2t0 t1
Step dimming
10%
100%
t2t0 t1
5 Year Guarantee
5 Year Guarantee
Daylight threshold
SPECIFICATIONS
MC609V RCDimming Function/ Detachable VersionFor LED Tri-proof Light & LED Batten
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
800W@347Vac(Inductive);1200W@347Vac(Resistive)1200W@480Vac(Inductive);1800W@480Vac(Resistive)
Sensor:5s/30s/1min/3min/20min/30minRemote control: 5s/30s/1min/3min/5min/10min/20min/30minSensor:0s/1min/3min/10min/30min/DisableRemote control: 0s/10S/1min/3min/5min/10min/30min/Disable
347/480Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
8m Max.
15m
10%/20%/30%/50%
5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~55℃
IP65
5 Year Guarantee
5 Year Guarantee
Daylight threshold
MC609V RC A MC609V RC B
MC609V RC C MC609V RC D
1-10V dimmable control gearLoad
BrownL in Yellow L out
Blue N Red +
Bla
ck-
1-10V
MC609V A/MC609V B/MC609V C
MC609V D
IP65
3m
Detection area
100% 2m 3.5m75 % 1m 2m50 % 0.5m 1.5m10% 0m 0.5m
3.5m
12m
2m
LNNLLNNL
71 72
MH01
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
Linear & battenHigh bay & low bay
High bay & low bayLinear & batten
Normal motion detecting
Normal motion detecting
1-10V+ -
1-10V+ -
North American Products
North American Products
Master-slattlie controlSYNC
8m
Detection area
100% 2m 2.5m75 % 1m 1.5m50 % 0.5m 1m25% 0m 0.5m
3m
2m 2.5m
15m
3m
Detection area
100% 2m 3.5m50 % 1m 2m
3.5m2m
Microwave Motion Sensor�
Detection Pattern (max / min)
Microwave Motion Sensor�
Detection Pattern (max / min)
Step dimming
10%
100%
t2t0 t1
Step dimming
10%
100%
t2t0 t1
5 Year Guarantee
5 Year Guarantee
Daylight threshold
SPECIFICATIONS
MC610V RC/MC611V RCNorth American Version / Dimming Function
347/480Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
8m Max.
15m
10%/20%/30%/50%
5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~55℃
IP20
Sensor: 5s/30s/1min/3min/20min/30minRemote control: 5s/30s/1min/3min/5min/ 10min/20min/30min
Sensor:5s/30s/1min/3min/20min/30minRemote control: 5s/30s/1min/3min/5min/ 10min/20min/30min
Sensor: 0s/1min/3min/10min/30min/DisableRemote control: 0s/10S/1min/3min/5min/ 10min/30min/Disable
Sensor:0s/1min/3min/10min/30min/DisableRemote control: 0s/10s/1min/3min/5min/ 10min/30min/Disable
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
8m Max.
15m
10%/20%/30%/50%
-35℃~55℃
IP20
5lux/15lux/30lux/50lux/100lux/150lux/Disable
SPECIFICATIONS
MC612VD RCNorth American Version / Dimming Function
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
Sensor: 5s/30s/1min/5min/10min/15min/30minRemote control: 5s/30s/1min/10min/15min/30minSensor: 0s/1min/3min/5min/10min/30min/+∞Remote control:0s/1min/3min/5min/10min/30min/+∞
120/277Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
4m Max.
8m
10%/20%/30%/50%
5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~70℃
IP20
5 Year Guarantee
5 Year Guarantee
Daylight threshold
MC610V RC MC611V RC
LNNL
LED driver
73 74
Daylight harvesting
80%20%
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
Linear & battenLinear & batten
Normal motion detectingNormal motion detecting
120Vac: 4A Electronic/magnetic ballast277Vac: 3A Electronic/magnetic ballast
347Vac: 3A Electronic/magnetic ballast480Vac: 3A Electronic/magnetic ballast
120Vac: 4A Electronic/magnetic ballast277Vac: 3A Electronic/magnetic ballast
MH02
MH02
North American Products
North American Products
8m
Detection area
100% 2m 2.5m75 % 1m 1.5m50 % 0.5m 1m25% 0m 0.5m
3m
2m 2.5m
Microwave Motion Sensor�
Detection Pattern (max / min)
5 Year Guarantee
5 Year Guarantee
Microwave Motion Sensor�
SPECIFICATIONS
MC613VD RCDimming Function/ Detachable VersionFor LED Tri-proof Light & LED Batten
Operating voltage
Rated Load
HF system
Transmitting power
Power consumption
Detection Area(Radius)
Max. Mounting height
Hold time
Stand-by Period
Stand-by DIM Level
Daylight sensor
Operating temperature
IP rating
Sensor: 5s/30s/1min/5min/10min/15min/30minRemote control: 5s/30s/1min/10min/15min/30minSensor: 0s/1min/3min/5min/10min/30min/+∞Remote control:0s/1min/3min/5min/10min/30min/+∞
347/480Vac
5.8GHz±75MHz, ISM wave band
<0.5mW
≤0.5W(stand-by)
4m Max.
8m
10%/20%/30%/50%
5lux/15lux/30lux/50lux/100lux/150lux/Disable
-35℃~70℃
IP20
Daylight threshold
Step dimming
10%
100%
t2t0 t1
Reset Auto Mode
QS1
QS2
QS3
QS4
100%
50%
75%
25%
5s
30s
1min
3min
30min
20min
10min
5min
10%
20%
30%
50%
0s
10s
1min
3min
+
30min
10min
5min
8
5Lux
15Lux30Lux
50Lux
100Lux150Lux
Disable
Quick Setting
Detection Area
Hold Time
Stand-by DIM Level
Stand-by Period
Daylight Sensor
ON/OFF
DIM Test
Page 77
MS01
Page 79
MS02
Page 81
MK003
Page 82
MH01
Page 83
MH02
Page 83
MH03
Accessories
LED driver
75 76
*These data were tested by a 165cm height person and his walking speed is 1m/s.
*
North American Products
Linear & batten
Normal motion detecting
347Vac: 3A Electronic/magnetic ballast480Vac: 3A Electronic/magnetic ballast
MH02
SPECIFICATIONS
MS01Daylight Sensor
Operating voltage �
Max.current sink
Dimming range
Color coding of cable
Cable length
Detection angel �
Operating temperature
IP rating
1~10Vdc
50mA(Maximum rating)
1% - 100%
Red+,Black-
80cm
90°
-0℃~45℃
IP20
Motion sensor
5 Year Guarantee
5 Year Guarantee
77 78
When the ambient light is larger than the present illumination level (Set by 1-10V daylight sensor), the lamp stays off.
When the ambient light is below the present illumination level, the lamp switches on when motion is detected.
The lamp light dims to maintain its present illumination level against the ambient light.
If there is sufficient ambient light, the lamp turns off at once, even with motion trigger.
If there is insufficient ambient light, the lamp dims to a stand-by dimming level (Set in the motion sensor) when no motion is detected during hold time, it will switch off after stand-by period.
Connecting to 1-10V interface and using photocell to measure the ambient lux level and automatically calculate how much artificial light is needed.
Dimming level atstand-by period
Remain the present level on the sensor
AccessoriesAccessories
Automatically switches onwhen motion is detected
Automatically switches off
High bay & low bayLinear & batten
Daylight harvesting
80%20%
Accessories Accessories
ON/OFF function
Identifying of artificial LED light and natural light
SPECIFICATIONS
MS02Daylight Switch
Operating voltage �
Rated Load
Open/close
Operating temperature
IP rating
220~240Vac
400W LED
-20℃~50℃
IP20
5 Year Guarantee
5 Year Guarantee
Dusk-to-dawn Switching
Setting
MS02 is suitable to installed in all types of LED lighting fixtures and switches on lights at dusk, switches off lights at dawn.
Note: As MS02 is designed for LED lighting fixtures, it is not applicable to tungsten-halogen lamp. The user needs to determine whether it can be used in other types of luminaires.
By selecting the correct combination of the DIP switches, switching on/off lux level can be set based on desired requirements.
79 80
Automatically switches on the lights at dusk.
When the ambient light level is below the open lux level, the sensor will switch on the lights at 100% brightness automatically. When the ambient light level is over the close lux level, the lights will be switched off.
AccessoriesAccessories
Stays continuously illuminated throughout the night.
Switches off the lights at dawn.
Open:5lux/10lux/25lux/50lux/100lux/150lux/200lux/disableClose:25lux/50lux/75lux/100lux/200lux/300lux/400lux/disable
Wall light
Accessories Accessories
The Microwave Sensor's green working light will flash 3 times when the remote control is set successfully.
Accessories
SPECIFICATIONS
MK003Temperature Sersortemperature guard
Operating voltage �
temperature of derating
Length of wire
Connection
Dimension �
IP rating
1~10Vdc
60℃
400mm
White:1-10V(+)Black:1-10V(-)
31.5x15x8mm
IP20
R
Reset Auto Mode
QS1 QS2 QS3 QS4
100%50% 75%25%
5s 30s 1min 3min
30min20min10min5min
10% 20% 30% 50%
0s 10s 1min 3min
+30min10min5min 8
5Lux 15Lux 30Lux 50Lux
100Lux 150Lux Disable
Quick Setting
Detection Area
Hold Time
Stand-by DIM Level
Stand-by Period
Daylight Sensor
ON/OFF DIM Test
Test (2s)
SETTINGS (REMOTE CONTROL MH01)
Press the “ON/OFF” button, the light goes to constant on or constant off mode, the sensor is disabled.Press “ Reset ” or “ Auto Mode” button to quit from this mode.
Press “Reset” button, all parameters are the same as the DIP switch setting.
Press “Auto Mode” button, the sensor starts to work and all parameters setting will remain the same as the previous status before the light is switched on/off.
The button “Test(2s)” is for factory testing purpose only. The sensor will go in to test mode,Detection sensitivity: 100%Hold time: 2secstand-by dim level:10%Stand-by period: 0s Daylight sensor: DisableTest mode can be disabled by pressing any button.
Button Remarks
Reset
Auto Mode
QS1 QS2
QS3 QS4
ON/OFF
Test (2s)
DIM Test
Press “DIM Test” button to test the dimming function. The sensor will dim automatically and return to the normal work mode.
SceneOptions
DetectionArea
HoldTime
Stand-byperiod
Stand-bydim level
DaylightSensor
QS1
QS2
QS3
QS4
100%
100%
100%
100%
30s
1min
5min
10min
1min
3min
10min
30min
10%
10%
10%
10%
5Lux
10Lux
30Lux
Disable
Note: Detection area / Hold time /Stand-by period /
Stand-by dim level / Daylight sensor can be adjusted
by pressing the corresponding button. The latest setting
will stay valid.
Mounting height Distance between each sensor
15m 4m
12m 3.4m
9m 2.4m
6m 1.6m
3m 0.8m
7.5° 7.5°
R
Reset Auto Mode
QS1 QS2 QS3 QS4
100%50% 75%25%
5s 30s 1min 3min
30min20min10min5min
10% 20% 30% 50%
0s 10s 1min 3min
+30min10min5min 8
5Lux 15Lux 30Lux 50Lux
100Lux 150Lux Disable
Quick Setting
Detection Area
Hold Time
Stand-by DIM Level
Stand-by Period
Daylight Sensor
ON/OFF DIM Test
Test (2s)
Motion sensor Motion sensor
As the control angle of the Infrared Remote Control is fixed (15°), if the sensors are installed too close to each other, the settings of both sensors will be configured. Please refer to the below chart for the distance of the installation of each sensor:
81 82
Powered by a standard 1-10Vdc interface without needing a special led driver with NTC connection.
Accessories
High bay & low bay Flood light
Accessories Accessories
Button Remarks
Reset
ON/OFFPress the"ON/OFF"button,the light goes to constant on or costant off mode,sensor is disabled.
Press "Reset"button, all parameters are the same as the DIP switch setting.
Detection area: 50% /100%
Daylight sensor: 5Lux/15 Lux/50 Lux/Disable
Hold time: 10s/90s/3min/10min
Button
Transmit Uploads the settings
Detection Area
Hold time
Stand-by period
Stand-by DIM level
Daylight Threshold
Auto mode
ON-OFF
Reset
Ambient Threshold
Dim+ / Dim -
1/2/3/4
25%/50%/75%/100%
The timeout from 100% to dim 5S/30s/1min/5min/10min/15min/20min
5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/ Disable
The timeout from dim to off0S/1min/3min/5min/10min/20min/30min/+�
10%/20%/30%40%
1. Movement Motion detect 3-6m2. Presence detect 3-6m3. Presence detect with daylight harvesting 3-6m4. High mounting: 6-15m 5. High mounting with daylight harvesting : 6-15m
Permanent ON/OFF
Button for default settings
Pressing this button, will disable the daylight harvesting function, which is offset if the current threshold is not suitable
Adjust the target light level according to the ambient light
4 optional quick settings
Name Description
Merrytek Exhibitions
83 84
Light + Building Trade Fair (Frankfurt, Mar 2016)
International Lighting Fair (Hongkong, Oct 2016)
International Lighting Exhibition (Guangzhou, Jun 2016)
International Sourcing Fair (Ningbo, May 2016)
Luxlive Fair (London, Nov 2016)
Accessories
Accessories
SETTINGS (REMOTE CONTROL MH02)
SETTINGS (REMOTE CONTROL MH03)