Embed Size (px)
Citation preview
An economical, easy-to-use
industrial chiller
The industrial NESLAB CFT-300 unit offers
high cooling capacities at an affordable
price. The chiller features an easy-to-
operate digital controller, bright LED
readout, and pressure gauge for fluid
systems diagnostics at a glance.
Reliable, stand-alone operation
The unit’s air-cooled condenser promotes
reliable, stand-alone operation, while the
quick release grill allows for easy condenser
cleaning.
Match your cooling water requirements
Choose between two pumps to meet your
cooling water requirements: the standard
PD-2 and the optional CP-55.
A n a l y ze • Detect • Me a s u re • C o n t ro l™
Economical NESLAB CFT-300
recirculating chiller is ideal for
removing large amounts of heat
from a variety of applications.
NESLAB CFT-300 Recirculating ChillerDelivers a continuous supply of cooling capacity up to 10,650 watts
Typical applications for the CFT-300 unit:
• Analytical Instrumentation
• Lasers
• Process Cooling for Industrial
Applications
• Semiconductor Tools
CFT 300 DataSheet 6/11/06 3:54 PM Page 1
USA HEADQUARTERS
25 Nimble Hill Rd.
Newington, NH 03801
Tel. 800 258 0830
Benelux
Takkebijsters 1
NL-4817 Breda
Tel. +31 (0) 76 5 87 98 88
China
Bldg 6, No. 27, Xin Jinqiao Rd
Jinqiao Export Zone, Pudong
Shanghai 201206
Tel. +86 (21) 68 65 45 88
France
16 Avenue du Québec - Silic 765
91963 Courtaboeuf Cedex
Tel. +33 (0) 1 60 92 48 00
Germany
Dieselstr. 4
76227 Karlsruhe
Tel. +49 (0) 721 4 09 44 44
India
415 City Point
193 Dhole, Patil Road
Pune 411001 INDIA
Tel +91 (20) 6601 1245
United Kingdom
Unit 5, The Ringway Centre
Basingstoke, Hampshire
Rg21 6YH
Tel. +44 (0) 870 609 9254
Specifications
Cooling Capacity at 20° C
60 Hz 10,650 watts
36,315 BTU/hr
9,181 Kcal/hr
50 Hz 9,000 watts
30,690 BTU/hr
7,759 Kcal/hr
Temperature Range* 5° C to 35° C
Temperature Stability +/- 1° C
Pumping Capacity
(PD-2) 60Hz 3 GPM @ 60 PSI(PD-2) 50Hz 11.3 LMP @ 50 PSI
Pumping Capacity
(CP-55 Optional) 60Hz 10 GPM @ 40 PSI
(CP-55 Optional) 50Hz 38 LPM @ 38 PSI
Dimensions
H x W x D in 43" x 25.5" x 27.8"
H x W x D cm 109.5 cm x 64.8 cm x 70.5 cm
Power Requirements 208-230V, 60Hz, 21 amps, 3 phase
380, 50Hz, 12 amps, 3 phase
Shipping Weight 450 lbs/204.1 Kgs
*Extended temperature range (-15° C) units also available
Accessories
611000000047 Air Filter Kit, CFT-300
611000000008 Chiller Plumbing Kit, 3/4"
610000000003 Chloramine-T Algicide
610000000001 Ethylene Glycol
342000000007 External Pressure Reducer, 3/4"
341000000001 External Temperature Readout, 3/4"
611000000055 Fluid Filter Kit, 5 Micron, Partial Flow, 3/4"
611000000056 Fluid Filter Kit, 10 Micron, Partial Flow, 3/4"
611000000057 Fluid Filter Kit, 25 Micron, Partial Flow, 3/4"
611000000058 Fluid Filter Kit, 40 Micron, Partial Flow, 3/4"
©2006 Thermo Electron Corporation. All rights reserved. The information contained herein is
subject to change without notice. Any trademarks, trade names or copyrights remain solely
the property of the manufacturer unless otherwise stated. The only warranties for Thermo
products are set forth in the express limited warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty.
Thermo shall not be liable for technical or editorial errors or omissions contained herein.
PSCFT300v1.0E04/06TC
NESLAB CFT-300 Specifications and Curves
Cooling Capacity
CP 55 Pumping Capacity PD 2 Pumping Capacity
A = CP 55, 60Hz
B = CP 55, 50Hz
A = PD-2, 60Hz
B = PD-2, 50Hz
CFT 300 DataSheet 6/11/06 3:54 PM Page 2
