MT-500 .R2

Class-D DSC capabilities meets the latestEN 301-025 operations

Position Send/Request function

Built-in CH70 watch receiver

Large dot-matrix LCD

LL position indication with GPS connected

Channel name indication

SELECT/ENT knob for channel/menu

Alphanumeric keypad microphone

One button instant access to CH16

All available INT'L channels

Priority, All and Memory Scan

Mounting bracket for overhead and desktop

Flush mount kit included

ATIS mode for inland waterways *Depending on version

Waterproof equivalent to the JIS-7

www.m-techmarine.com

MARINE VHF TRANSCEIVER

MT-500 .R2 FEATURES:

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

The MT-500 .R2 is a compact Class-D DSC equipped

marine VHF from M-TECH. It meets the EN 301-025

capabilities with inside separate CH70 watch receiver.

Position Send/Request functions are also included,

which enable you to transmit/request the position data

to your friends. The received position data is trans-

ferred to a connected plotter, if your plotter is DSC

capable. Large "SELECT/ENT" knob can be rotated

and pushed, which supplies you simple and easy

operation for channel and menu selection.

Construction is waterproof equivalents to the JIS-7

standard. Flush mount kit is included in the box.

MT-500 .R2 MARINE VHF TRANSCEIVER

K35011C ©2011 Pony Electric Corp. Printed in Japan

M-TECH. YOUR SHIPMATE.E-mail. info@m-techmarine.com http://www.m-techmarine.com

Manufacturer: PONY ELECTRIC CorporationNo. 202, 6-28, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan

Tel. +81 (0)3 3405 5733 Fax. +81 (0)3 3405 8677

SUPPLIED ACCESSORIESSUPPLIED ACCESSORIES

● Power cable ● NMEA Data cable ● Mounting bracket

● Microphone hanger

Less than -70dB.

Less than -40dB unsquelched.

-6dB/Octave slope within +1/-3dBfrom 300 to 2500Hz, 18dB/Octaveover 3000Hz.

All INT'L plus authorized local channels.

Dimensions :

Weight :

Channels :

160(W) x 69(H) x 165(D) mm.Heat sink included. Not bracket.

1.150 Kg with MIC.

Vdc Input : 13.6Vdc.

Receiver Current : 200mA in Standby (2 receivers).

Modulation Acceptance : +/-7 kHz minimum.

Adjacent ChannelSelectivity :

Image Rejection :

IntermodulationSpurious Response :

Less than -70dB for +/-25kHz.

Less than -70dB.

156.300MHz - 162.000MHz.

Audio Output Power :

Receive Frequencies :

0.5µV or less for 20dB SINAD.Sensitivity :

0.25µV to 0.80µV @ full squelch.Squelch Range :

6 Amps @ 25W Tx. 1 Amp @ 1W Tx.

Modulation : G3E for Voice, G3B for DSC Data.

Output Power : 25W / 1W.

Transmit Frequencies : 156.025MHz - 157.425MHz.

Less than 0.25µW.Spurious /Harmonic Emissions :

+/-5kHz deviation with 100% modulation.Modulation Limiter :

+6dB / Octave slope within +1/-3dB from300 to 2500Hz, 18dB/Octave beyond 3000Hz.Audio Low Pass Filter is included.

Less than -40dB.

Frequency Response :

Hum & Noise :

Noise Level :

Specifications are subject to change without notice.

SPECIFICATIONSSPECIFICATIONS

GENERAL RECEIVER

TRANSMITTER

DIMENSIONSDIMENSIONS

Audio FrequencyResponse :

Less than 4% @ 1kHz for +/-3kHz deviation. Modulation Distortion :

Tx Current :

● Flush mount kit

3.0W min. @ 4ohms with less than10% distortion.

137 mm

6

9 m

m

160 mm

49 mm

1

65

mm

4

3 m

m