MT-500 .R2
Class-D DSC capabilities meets the latestEN 301-025 operations
Position Send/Request function
Built-in CH70 watch receiver
Large dot-matrix LCD
LL position indication with GPS connected
Channel name indication
SELECT/ENT knob for channel/menu
Alphanumeric keypad microphone
One button instant access to CH16
All available INT'L channels
Priority, All and Memory Scan
Mounting bracket for overhead and desktop
Flush mount kit included
ATIS mode for inland waterways *Depending on version
Waterproof equivalent to the JIS-7
www.m-techmarine.com
MARINE VHF TRANSCEIVER
MT-500 .R2 FEATURES:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
The MT-500 .R2 is a compact Class-D DSC equipped
marine VHF from M-TECH. It meets the EN 301-025
capabilities with inside separate CH70 watch receiver.
Position Send/Request functions are also included,
which enable you to transmit/request the position data
to your friends. The received position data is trans-
ferred to a connected plotter, if your plotter is DSC
capable. Large "SELECT/ENT" knob can be rotated
and pushed, which supplies you simple and easy
operation for channel and menu selection.
Construction is waterproof equivalents to the JIS-7
standard. Flush mount kit is included in the box.
MT-500 .R2 MARINE VHF TRANSCEIVER
K35011C ©2011 Pony Electric Corp. Printed in Japan
M-TECH. YOUR SHIPMATE.E-mail. [email protected] http://www.m-techmarine.com
Manufacturer: PONY ELECTRIC CorporationNo. 202, 6-28, Akasaka 9-chome, Minato-ku, Tokyo 107-0052, Japan
Tel. +81 (0)3 3405 5733 Fax. +81 (0)3 3405 8677
SUPPLIED ACCESSORIESSUPPLIED ACCESSORIES
● Power cable ● NMEA Data cable ● Mounting bracket
● Microphone hanger
Less than -70dB.
Less than -40dB unsquelched.
-6dB/Octave slope within +1/-3dBfrom 300 to 2500Hz, 18dB/Octaveover 3000Hz.
All INT'L plus authorized local channels.
Dimensions :
Weight :
Channels :
160(W) x 69(H) x 165(D) mm.Heat sink included. Not bracket.
1.150 Kg with MIC.
Vdc Input : 13.6Vdc.
Receiver Current : 200mA in Standby (2 receivers).
Modulation Acceptance : +/-7 kHz minimum.
Adjacent ChannelSelectivity :
Image Rejection :
IntermodulationSpurious Response :
Less than -70dB for +/-25kHz.
Less than -70dB.
156.300MHz - 162.000MHz.
Audio Output Power :
Receive Frequencies :
0.5µV or less for 20dB SINAD.Sensitivity :
0.25µV to 0.80µV @ full squelch.Squelch Range :
6 Amps @ 25W Tx. 1 Amp @ 1W Tx.
Modulation : G3E for Voice, G3B for DSC Data.
Output Power : 25W / 1W.
Transmit Frequencies : 156.025MHz - 157.425MHz.
Less than 0.25µW.Spurious /Harmonic Emissions :
+/-5kHz deviation with 100% modulation.Modulation Limiter :
+6dB / Octave slope within +1/-3dB from300 to 2500Hz, 18dB/Octave beyond 3000Hz.Audio Low Pass Filter is included.
Less than -40dB.
Frequency Response :
Hum & Noise :
Noise Level :
Specifications are subject to change without notice.
SPECIFICATIONSSPECIFICATIONS
GENERAL RECEIVER
TRANSMITTER
DIMENSIONSDIMENSIONS
Audio FrequencyResponse :
Less than 4% @ 1kHz for +/-3kHz deviation. Modulation Distortion :
Tx Current :
● Flush mount kit
3.0W min. @ 4ohms with less than10% distortion.
137 mm
6
9 m
m
160 mm
49 mm
1
65
mm
4
3 m
m