modular · PDF filemodular desks Bridge Desk – Quarter-Moon (RQMB) •Completes a worksurface by connecting to a freestanding desk with flush plates •Comes with two gables, one

PRODUCT MAP / TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . 2 2

F IXED -HE IGHT DESK BAS ICS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8

SEMI - SUPPORTED L - SHAPED DESK & RECTANGULARWORKSURFACE BAS ICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2

HE IGHT-ADJUSTABLE DESK BAS ICS . . . . . . . . . . . . . . . . . . . . . 3 6

V I S ITOR OPT ION BAS ICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 8

DESK F IN I SHES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0

GRA IN D IRECT ION / USER EDGE . . . . . . . . . . . . . . . . . . . . . . . 4 2

PRODUCT L I ST ING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4

expansion desking price guide – January 22, 2018

modular desks

R N D R S Semi-Supported L-Shaped Desk with Suspended Return– Half Gable

Page 78Depth A: 24" or 30" / Depth B: 24" or 30" /Width A: 57" – 84" / Width B: 66" – 84"

R N R W R Semi-Supported L-Shaped Desk withSuspended Worksurfaceand Radius Corner –Full Gable


R N R R R Semi-Supported L-Shaped Desk withSuspended Return andRadius Corner –Full Gable


R N D W R Semi-Supported L-Shaped Desk with SuspendedWorksurface – Full Gable


R N D R R Semi-Supported L-Shaped Desk with Suspended Return– Full Gable


R N D W S Semi-Supported L-Shaped Desk with SuspendedWorksurface – Half Gable


R U R R Single Structure L-ShapedDesk with Radius Corner –Full Gables


R U R S Single Structure L-ShapedDesk with Radius Corner –Full and Half Gables


R U R D Single Structure L-ShapedDesk with Radius Corner –Half Gables


R U D R Single Structure L-ShapedDesk – Full Gables


R U D S Single Structure L-ShapedDesk – Full and HalfGables


R U D D Single Structure L-ShapedDesk – Half Gables


modular desks

product map


R D U R Rectangular Desk withKeyboard Support – Full Gables

Page 110Depth: 30" or 36" / Width: 42" – 60"

R D U S Rectangular Desk withKeyboard Support – Full and Half Gables


R D F D Cross Grain RectangularDesk with – Half Gables

Page 108Depth: 20" – 36" / Width: 24" – 60"

R D R S Rectangular Desk – Full and Half Gables

Page 102Depth: 20" – 36" / Width: 24" – 84"

R D R D Rectangular Desk –Half Gables

Page 104Depth: 20" – 36" / Width: 24" – 84"

R D F S Cross Grain RectangularDesk with – Full and HalfGables

Page 106Depth: 20" – 36" / Width: 24" – 60"

R N R W S Semi-Supported L-Shaped Desk withSuspended Worksurfaceand Radius Corner –Half Gable


R D A R Rectangular Desk withVisitor Access – Full Gables

Page 98Depth: 24" – 36" / Width: 60" – 84"

R D R R Rectangular Desk – Full Gables

Page 100Depth: 20" – 36" / Width: 24" – 84"

modular desks

product map (continued)


R D U D Rectangular Desk withKeyboard Support – Half Gables


R V S S Concave Transition Desk –Full and Half Gables

Page 113Depth A: 24" or 30" / Width: 36" – 84" / Depth B: 30" or 36"

R N R R S Semi-Supported L-Shaped Desk withSuspended Return andRadius Corner –Half Gable


R V U S Extended Corner Desk –Full and Half Gables


R V U D Extended Corner Desk –Half Gables


R D K R Extended Corner Deskwith Keyboard Support –Full Gables

Page 128Depth A: 24" or 30" / Depth B: 24" or 30" / Width A: 48" or 54" / Width B: 60" – 84"

R D S K Standard Corner Deskwith Keyboard Support –Half Gables

Page 120Depth: 24" or 30" / Width: 42" or 48"

R T S R Standard Radius CornerDesk – Half Gables


R V U R Extended Corner Desk –Full Gables


R K X D EDP Corner Desk withKeyboard Support – Half Gables

Page 117Depth: 16" or 22" / Width: 36" or 42"

R V R D Radius Corner Desk –Half Gables


R D S D Standard Corner Desk –Half Gables


R K D S EDP Desk – Full and Half Gables


R K S S EDP Transition Desk –Full and Half Gables


modular desks



R V S D Concave Transition Desk –Half Gables


R V W S Extended Curved CornerDesk – Full and HalfGables

Page 135Depth A: 24" or 30" / Depth B: 30" or 36" / Width A: 42" – 54" / Width B: 66" – 84"

R V W D Extended Curved CornerDesk – Half Gables


R T L D L Rectangular Worksurface

Page 138Depth: 20" – 30" / Width: 24" – 84"

R V W R Extended Curved CornerDesk – Full Gables


R D K S Extended Corner Deskwith Keyboard Support –Full and Half Gables


R D K D Extended Corner Deskwith Keyboard Support –Half Gables


modular desks



R T L D C Cross Grain RectangularWorksurface

Page 140Depth: 20" – 30" / Width: 24" – 60"

R D R P Rectangular PeninsulaDesk – Half Gables


R D B N D-Shaped PeninsulaWorksurface

Page 143Depth: 24" – 36" / Width: 48" – 84"

R D B U D-Shaped Peninsula Desk– Half Gables

Page 144Depth: 24" – 36" / Width: 48" – 84"

R V D D Extended D-ShapedPeninsula Desk – Half Gables

Page 146Depth: 24" or 30" / Width A: 42" – 54" / Width B: 54" – 84"

R V D K Extended D-ShapedPeninsula Desk withKeyboard Support – Half Gables

Page 148Depth: 24" or 30" / Width A: 48" or 54" / Width B: 66" – 84"

R T C D End Worksurface –Convex

Page 158Depth: 18" / Width: 48" – 72"

R Q M B Bridge Desk –Quarter-Moon

Page 157Depth: 20" – 36" / Width: 20" – 36"

R V X K D Extended P-ShapedPeninsula Desk withKeyboard Support –Half Gables


R D P D P-Shaped Peninsula Desk– Half Gables

Page 154Depth: 24" – 36" / Width: 48" – 84"

R H M B End Worksurface –Half-Moon

Page 156Depth: 18" – 36" / Width: 48" – 72"

R V N D Extended Curved D-Shaped Peninsula Desk– Half Gables


R V X D Extended P-ShapedPeninsula Desk – Half Gables


modular desks



R J R R Height-AdjustableRectangular Desk – Full Gables


R J R S Height-AdjustableRectangular Desk – Full and Half Gables


R J R D Height-AdjustableRectangular Desk – Half Gables


R J U S Height-Adjustable ExtendedCorner Desk – Full andHalf Gables


R J U D Height-Adjustable ExtendedCorner Desk – Half Gables


R T S Q Square Table

Page 167Width: 24" – 54"

R T C I Round Table

Page 168Diameter: 42" – 54"

R T E L Ellipse Table

Page 169Depth: 24" – 36" / Width: 48" – 84"

modular desks



R T L V C W/R/S Cross GrainRectangular Worksurface

Page 172Depth: 20" – 30" / Width: 42" – 60"

R T L V L W/R/S RectangularWorksurface

Page 170Depth: 20" – 30" / Width: 42" – 84"

R A V B W/R/S-MountedWorksurface Brackets

Page 173

R T R T Rectangular Table


fixed-height desk basics


modular desks

• Three fixed-height desks are available: Modular, Single Structure and Semi-Supported L-Shaped Desks• Desk assemblies span up to 84" in width without multiple supports• Desks are shipped knocked down• Desks are compatible with all Teknion underworksurface storage products• Cannot be attached to Teknion's W/R/S Wall Rail System. For details on W/R/S, refer to the Application Guide

Expansion Desking worksurfaces are offered in Generic, Linear and Curvilinear shapes. They can be used individually orwith other desks to create a variety of workstation configurations.

Curvilinear Shape Modular DesksDesigned to create wrap-around workstations thatminimize lateral movement

Generic Shape Modular DesksAvailable in a variety of shapes including: Rectangular,EDP, EDP Corner, Standard Corner, Extended Corner,Rectangular and D-Shaped Peninsula and Bridge

Linear Shape Modular Desks• Inspired from other Teknionproduct offerings

• May be used as an aestheticalternative to generic orcurvilinear shape desks

Standard RadiusCorner Desk – HalfGables (RTSR)

EndWorksurface –Convex (RTCD)

Also available:

L-Shaped Desks• Two L-Shapes are available:Single Structure or Semi-Supported

• Available with or withoutRadius Corner Worksurface

• Single Structure Desk issupported with gables on bothends

• Semi-Supported L-ShapedDesks are supported with gableson one direction and a selectionof various support styles (Legs,Frame Leg, Semi-SupportedLeg, storage; all not included)on the other direction

• L-Shaped Desks are available upto 84" x 84"

fixed-height desk basics (continued)


modular desks

Bridge Desk – Quarter-Moon(RQMB)• Completes a worksurface byconnecting to a freestandingdesk with flush plates

• Comes with two gables, onehalf and one 3/4

• Can be applied to left or rightof worksurface

• Depth must equal desk depth

End Worksurface – Half-Moon(RHMB)• Used to attach and completeback-to-back workstations

• Must connect to freestandingdesks using flush plates

• Comes with a choice of leg (Central Post Leg – 3 1/2"Round or Camber Base)

• Width must equal the totaldepth of both desks

Worksurfaces• Worksurface dimensions listed are actual dimensions of the finished product

• Some desks include a built-in compressed gas support for mouse and keyboard; see individual product pages

• Height adjustment of keyboard is activated by a release paddle located on the right underside of the surface

• Grain direction varies depending on the type of desk specified; see page 42

• The tilt of keyboard is adjusted using a knob located on the left underside of the surface

AccessoriesCan be specified separately

+15˚

-15˚

0˚35.5"

29"22.5"

6.5"6.5"

0"

modular desks



Desking Column Grommet

Worksurface

Structural Beam

Desking Gable Grommet

Corner Post

Wire Management Clip

Gable Attachment

Non-Handed Gable (except for MetalC-Leg)

Levelers are included with the gable andhave an adjustment range of 3", exceptfor Metal C-Leg (1" adjustment range)

Assembly Plate is available withL-Shaped Desks only

All desks include a worksurface, grommets, structural beams, corner posts and gables (or c-legs)

modular desk anatomy

single structure L-shaped desk anatomy

29" floor totop of finishedworksurface

2

3

45

6

7

8

9

2

1

1

3

4

5

6

7

8

9

10

10

modular desks



All desks with half gables must be connected to other desks

Gables• Full and half gables are non-handed for on-sitereconfigurability; Metal C-Legis handed

• All gable styles include agrommet

• Half gables provide additionalkneespace clearance at deskjunctions

• Flush plates are included tomaintain stability and level thesurface

• A desk cannot be mounted withMetal C-Legs, if: – overhead cabinets are stacked– Sit-On Cabinets or Elevated

Desktop Cabinets are used

Grommets• Desks come with factory-madegrommet cut-outs on the gablesand worksurfaces

• Provide openings for electricalwiring and communicationcables

• Include plastic ring and cover

Supports• Six support styles are availableto provide a variety of aestheticoptions

• Include leveler with a 3"adjustment range

• Support style/deskcombinations are not allavailable; see individual productpages

Flush-Mounted Modesty Panels(RDML, RDMO)• Not required for structuralstability, except in someconfigurations when overheadcabinets are stacked. For details,refer to page 396

• Can be specified full- or3/4-height

• Available in Solid (Laminate) orMetal. Metal panels are offeredin two styles: Embossed(4 patterns) and Solid

• Can be specified with orwithout grommet

Linear Style

3/12"Round

Square

Central Post Legs

Camber Base

FullGable

HalfGable

MetalC-Leg

2" Post Leg –Adjustable

Angled Leg

29" to 32"floor to topof finishedworksurface(All others)

24" to 32"floor to topof finishedworksurface(this leg only)

semi-supported L-shaped desk & rectangularworksurface basics


modular desks

• Only Semi-Supported L-Shaped Desks (RNDW_ and RNDR_), Semi-Supported L-Shaped Desks with Radius Corner(RNRW_ and RNRR_), Rectangular Peninsula Desk (RDRP), Rectangular Worksurfaces (RTLDL and RTLDC) can be semi-supported

• The left or right handed configuration is available. It is determined by the return (the shortest worksurface). The righthanded configuration is illustrated below

• Legs, Frame Leg, Semi-Supported Leg, or Storage, must be ordered separately• Suspended Modesty Panel is optional and can be ordered separately

Expansion Desking semi-supported L-shaped desks and worksurfaces can be used to minimize components and reduce theoverall cost of the workstation.

semi-supported L-shaped desk anatomy


4

3

2

1

5

Worksurface


Assembly Plate

Desking Worksurface Grommet is included with desk and is centered inthe worksurface. Not available with Semi- Supported L-Shaped Desk withRadius Corner. It can be changed with Rectangular Grommets (RAGC)which can be specified separately

Supports: Legs, Frame Legs, Semi-Supported Leg, Storage (Supported orHang-On) and W/R/S Brackets are not included with worksurface; theymust be specified separately

7

6

8

9

10

11

12

13

Cable Tray

Corner Post


Gable Attachment

Non-Handed Gable

Levelers are included with the gable and have an adjustment range of 3"


Structural Beam

2 3

4

5

6

7

8

9

1012

13

11

1

semi-supported L-shaped desk & rectangularworksurface basics (continued)


modular desks

Frame Legs (RWWO, RWWFL,or RWWFG)• Support the end of aworksurface to maintainstability

• Three Frame Leg support stylesare available:

• When specified, support andhardware are not included withdesk

Legs• Five leg support styles are available:

• Central Post Legs can be specified withRectangular Worksurfaces (RTLDL,RTLDC) only

• When specified, support and hardwareare not included with desk

24" to 32"floor to topof finishedworksurface(this leg only)

supporting applications – 28" high freestanding storage and other supports

Supported by a FreestandingStorage Configurations• Can be used to support one endof a desk or worksurface

• Must be installed withSupported Pedestal andhardware are included with deskto maintain stability

Side-Supported ConfigurationsCabinet depth must equal depthof worksurface under which it isinstalled

Back-Supported ConfigurationsCabinet width must equal depthof worksurface under which it isinstalled

Linear Leg

3 1/2"Round

Square

Central Post Legs

2" Post Leg –Adjustable

Angled Leg

Semi-Supported Leg – Solid(RAVG)• Supports the end of aworksurface which must beattached to another desk orstorage to maintain stability

• Must be specified full widthonly

• Cannot replace a standard gablewhen attached to a corner post

• When specified, support andhardware are not included withdesk

Also Available:

29" to 32"floor to topof finishedworksurface(All others)

Linking Plates• Can be used to link one end ofa worksurface to a desk

• When specified, Linking Platesand hardware are included withdesk or worksurface

Open SolidInfill

GlassInfill

29" from floorto top offinished

worksurface

Rectangular Worksurface (RTLDLor RTLDC) in CollaborativeApplications• Must be connected in the junctionof two desks (shown) or can also beused as a return on a single deskwith a full gable or credenza

• Even widths are actual; odd widthsare 1/2" smaller

• 60" maximum unsupported span isrequired when connected as areturn on a junction of two deskswith half gables or c-legs

60"max.

modular desks



hanging applications – freestanding storage higher than 28"

Side-Supported Configurations• Cabinet width must be addedto determine the workstationfootprint

• Only the 24" deep RectangularWorksurface can be side-supported by the Hang-OnSupports

Back-Supported Configurations• Cabinet width must equaldepth of worksurface underwhich it is installed

• Cabinet depth must be addedto determine the workstationfootprint

Freestanding Storage Higherthan 28" and Hang-On Kit(RBXHK)• Can be used to support one endof a desk or worksurface

• Must be installed with Hang-OnKit to maintain stability

• Semi-Supported Desk widthsare available in 3" increments inorder to fit with standard 6"layout for hang-on storageconfigurations

• When specified, Hang-OnBrackets and hardware areincluded with desk, except forExtended Supporting Towers(RBXT or RBXTC) thebrackets and hardware areincluded with storage only

modular desks



Freestanding ConfigurationsThe appropriate support combination will allow using the Rectangular Worksurface as a freestanding product

Some restrictions apply to the support combinations:

freestanding applications

Semi-Supported Legs

Frame Legs Hang-On Supports andSemi-Supported Leg

Semi-Supported Leg andLegs

modular desks


height-adjustable desk basics

• Height adjustment must be executed by a qualified installer• Cannot be attached to Teknion's W/R/S Wall Rail System. For details on W/R/S, refer to the Application Guide

Expansion Desking height-adjustable desks can accommodate all the accessories.

7" d

4

3

2

1

5

6

7


Fixed-Height Worksurface

Height-Adjustable Worksurface

Gable Attachment

Handed Height-Adjustable Half Metal Gable

Corner Post

Worksurface Support

9

8

10

11

12

13

Backsplash

Handed Height-Adjustable Metal C-Leg

Levelers are included with the gable and have an adjustment range of 3"



Structural Beam

1

2

3

4

56

9

10

11

12

13

7

8

modular desks


height-adjustable desk basics (continued)

• When Height-Adjustable Desks with Half Gables (RJRS, RJRD, RJUS and RJUD) are specified, the adjacent desk must beadjusted at the same height and must be linked with flush plates to maintain stability

• Only 2" Post Legs – Adjustable can be installed under Worksurfaces (RTLDL, RTLDC and RTCD) attached to height-adjustable desks

• Overhead Cabinets cannot be stacked

Height-Adjustable DesksAvailable in Rectangular andExtended Corner shapes

PedestalsWhen height is under 29", 0612configuration Pedestal (RBSP) orMobile Pedestal with Seat(RBTPS) can be used

Height-Adjustable Full MetalGable and Height-AdjustableMetal C-Leg• Handed and attached withuniversal mounting hardware

• Grommet included

Height-Adjustable Half MetalGable• Handed and attached withuniversal mounting hardware

• Grommet included

• Provides additional kneespaceclearance at desk junction

Flush-Mounted Modesty Panel(RDML and RDMO)• Can be specified full- or3/4-height

• Is mandatory only on shortestwidth (Width A, see productpages) of Height-AdjustableExtended Corner Desks

Grommets• Height-Adjustable Desks comewith factory-made grommetcutouts on the gables andworksurfaces

• Provide openings for electricalwiring and communicationcables

• Include plastic ring and cover

Full Metal Gable

MetalC-Leg


26" to 32"floor to topof finishedworksurface

modular desks


visitor option basics

The visitor recessed option allows an additional kneespace clearance for visitor.

Recessed Visitor Option (R)• Allows more kneespaceclearance for visitor

• Creates an 8" overhang

• Modifies the Inset ModestyPanel width. Use the InsetModesty Panel (RAML orRAMO) with the RecessedDesk Visitor option for thisapplication

Flush Visitor Option (F)Is ideal for small meeting spacesor team workstations

8"

modular desks


desk finishes

All Laminate components are protected with a solid plastic edge

Desks and related parts are available in a wide variety of finish colors. Finish codes must be included in the order.

Worksurface Keyboard SupportMechanisms Finished in Black

All Worksurfaces Available in Foundation Laminatecolors or Flintwood (NoCathedral)

Edge Trims• Available in Straight Trim (6) or Flintwood Flat Trim (9)

• Flintwood Flat Trim is only available on Flintwood worksurfaces.Edge trims will be finished to match the Flintwood worksurface

• Straight Trim is not available on Flintwood worksurfaces

Worksurface Keyboard SupportsAvailable in Foundation Laminatecolors or Flintwood (NoCathedral)

Fixed-Height Solid End Gables and Semi-Supported Leg• Available in Source Laminate colors

• Corner Posts and Structural Beams will match the color of endgables

Fixed-Height and Height-Adjustable Metal End Gables • Available in Foundation or Mica colors

• Corner Posts and Structural Beams will match the color of endgables

Fixed-Height and Height-Adjustable Full Metal C-Legs • Available in Foundation or Mica colors

• Corner Posts and Structural Beams will match the color of MetalC-Legs

modular desks


desk finishes (continued)All Desking Grommets (RAG)• Available in Source Laminate, Foundation and Mica colors

• Worksurface grommets match with a Flintwood worksurfacefinish or with a Foundation Laminate finish whenever acorresponding match is available in Source Laminate colors.Otherwise worksurface grommets match with the gable finish

• Grommets on modesty panels will match the panel finish

Levelers Finished in Black

Solid Modesty Panels (RDML,RAML, REML and REVL) Available in Source Laminatecolors

Metal Modesty Panels (RDMO,RAMO, REMO and REVO) Available in Foundation or Micacolors

Glass Modesty Panels (REVG) Available in 1/4" (6 mm)Standard or Back-Paintedtempered glass

Standard glass finish:– Frosted (FT)

LegsAvailable in Foundation or Micacolors

Flintwood Work. Finish Closest Match for Grommet Finish

Code Color Code Color Finish StyleFX Flax 3J Flax Reflect SourceFN Natural Pecan 3K Pecan Reflect SourceFM Medium Sycamore XH Cherry SourceFC Chianti XF Chianti SourceFD Dark Walnut XE Dark Walnut SourceNR Sierra Flint XQ Walnut Cathedralgrain SourceNT Cocoa Brown Flint 3N Cocoa Brown Reflect SourceVA Sycamore 3P Sycamore Reflect SourceVB Black Walnut DA Espresso SourceVZ Blonde Maple XN* Nevada Source5N White Oak 3F Campus Oak Source5P Poppy Seed 3W Slate Source5Q Harvest Cherry 3E Estate Cherry Source5R Earl Grey R Bronze Foundation5S Silverwash 3V Earth Source5T White Truffle XN* Nevada Source5V Caraway 3V Earth Source5W Drift Oak 3U Sand Source5Z American Walnut XQ Walnut Cathedralgrain Source

* This match suggestion is not close enough to be considered as tone on tone

grain direction / user edge


modular desks

RUDR, RUDS, RUDD or RNDWR, RNDRR, RNDWS, RNDRS

RKDS RKXD

RDSD RDSK RVUR, RVUSor RVUD

RDKR, RDKS or RDKD

RDBN orRDBU

RQMBRHMB

RTRT

RTSQ RTCI RTEL

RTSR

RTCD

RVDK RVXD RDPD

RDAR

RVSS orRVSD

RKSS

RVRD

RVXKDRVND

RVWR, RVWSor RVWD

RVDD

RDRR, RDRS,or RDRD

RURR, RURS, RURD or RNRWR, RNRRR, RNRWS, RNRRS

RDFS orRDFD

RDUR, RDUSor RDUD

RTLDL RTLDC

RJRR, RJRS orRJRD

RJUS or RJUD

RDRP

RTLVCRTLVL

EXCEPTION

24"24"or30"

57"to84"

84"24" x 84"Flintwood only

laminate worksurface grain/pattern direction

• Grain direction is an important factor when planning workstation, if a different grain direction is required, please contactyour Teknion Customer Service Representative

• Shading indicates user edge

modular desks


grain direction / user edge (continued)

Flush-MountedModesty Panel

SuspendedModesty Panel

Full Gable

Inset ModestyPanel

Half Gable

Semi-SupportedLeg

WorksurfaceSuspendedModesty Panel

laminate worksurface grain/pattern direction (continued)

flintwood worksurface grain/pattern direction

• There is no user edge so care must be taken during installation to match grain/pattern direction• Grain/patterns are not "centered" on worksurface• Applies to Flintwood (Standard)

Grain Direction Grain Direction

User Edge User Edge

Grain Direction Grain Direction

= Grain Direction =

= Grain Direction =Laminate =

User Edge User Edge

• Grain direction will appear in the samedirection, from side to side worksurface

User Edge User Edge

Flintwood =

User Edge

Right HandedLeft Handed

User Edge

• Regardless of worksurface handedness, grain direction from left to right from theuser's perspective

The pattern direction of Laminate is not "centered" and grain direction can appear in different direction from side-to-sideworksurface

Documents

modular · PDF filemodular desks Bridge Desk – Quarter-Moon (RQMB) •Completes a worksurface by connecting to a freestanding desk with flush plates •Comes with two gables, one