MEDICAL gAS WALL OUTLET QUICK CONNECT …® CHEMETRON Type medical gas outlets are integral to medical gas supply system. PAHSCO® CHEMETRON Type Gas Outlets comply with NFPA99 and

MEDICAL gAS WALL OUTLETQUICK CONNECT

CHEMETRON® COMPATIBLE

l Accepts only Chemetron gas specific adaptersl Indexed to prevent interchangeability of gas servicesl Universal rough-in accepts quick connection (Chemetron®, Ohmeda®, Puritan-Bennett®) or DISS latch valve assembliesl Modular design capability l 100% hydrostatically tested l Complies with NFPA 99 and CGA G-4.1 standardsl UL Listed

FEATURES

SPECIFICATIONSl Medical gas outlet(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC®). Wall outlet shall be designed for concealed piping installation and available for services indicated.l The latch valve assembly shall be Chemetron quick connect compatible and accept only gas specific Chemetron type quick connect adapters. Each latch valve assembly shall be color-coded for ease of gas identification per the appropriate standards (US or ISO). Latch valve assemblies shall have gas specific pin indexing corresponding to the rough-in assembly to prevent interchangeability of gas services and shall adjust up to 1” for variations in wall thickness.l Universal rough-in assembly shall include the wall rough-in plate (16 ga.) with inlet tubing silver brazed to the outlet body. Inlet tubing shall be type "K" copper, 1/2” (12.7 mm) OD, extend 6-1/2 inches (165 mm), and swivel 360º for ease of installation. Rough-in assembly shall accept only the specified gas service by use of indexes. Rough-in assembly shall be of modular design to permit on-site ganging of multiple outlets with assurance of accurate alignment and providing 5” centerline spacing. A dust plug and cover shall be provided to protect rough-in assembly from contamination during handling and installation at the job site.l Rough-in assemblies shall accept any latch valve assembly of the same gas service. The latch valve assembly shall be interchangeable, allowing conversion from one connection style to another without shutting down the medical gas system.l All positive pressure gas outlets shall have a primary and secondary check valve, where the secondary valve in the rough-in assembly allows servicing of the latch valve assembly without having to disrupt gas service to the outlet.l Complete outlet shall be delivered to the customer in a gas specific rough-in assembly, a matching gas specific latch valve assembly, both cleaned for oxygen use and in a sealed package, and a trim plate. All assemblies shall be 100% tested for leaks, manufactured to comply with the latest edition of NFPA 99, and UL Listed.

DIMENSIONS

Represented by:

Copyright © 2010, Genstar Technologies Co., Inc. Form No. 9-MS-CWO (Oct. 2010)

Genstar Technologies Company, Inc.4525 Edison AvenueChino, CA 91710, USATel: 909-606-2726 Fax: 909-606-6485 www.gentechealthcare.com

Technology for a Better Future

Dimensional Data Notes:A. Additional support needed if ganging more than 3 outletsB. Wall thickness may vary from 1/2” to 1” (12.7mm to 25.4mm).C. 1/2” O.D. (3/8” Nominal) type K copper inlet tube allows 360° swivel on outlet body for entry from any angle.D. Inch (mm)

ORDERINg INFORMATION

Ordering Information for Complete Wall Outlets (Includes Latch Valve Assembly, Trim Plate and Rough-in Assembly)Note: US colors listed. For ISO 32 colors replace “U” with “E” in the above catalog numbers.

3823U-O

3823U-V

3823U-A

3823E-2

3823U-W

3820-SLD

Oxygen

Vacuum

Medical Air

Nitrous Oxide

WAGD

Slide

MATERIAL

Cast Aluminum

Powder Coating

Latch Valve Rough-in Trim Plate

Stainless Steel

ABS Plastic

Neoprene

Steel+Plating

Copper

Aluminum

ABS Plastic

Steel/Brass+Plating

Stainless Steel

Brass

Neoprene

Rubber

Chemetron Compatible

gas Service Cat No. Qty

CHEMETRON Type

www.pahsco.com.tw

Medical Gas Outlets

PAHSCO® CHEMETRON Type medical gas outlets are integral to

medical gas supply system. PAHSCO® CHEMETRON Type Gas

Outlets comply with NFPA99 and CGA regulations and pass the

leak tests and connector stability checks. A package of medical gas

outlet includes finishing and rough-in assembly. In addition,

PAHSCO® CHEMETRON Type Gas Outlets are color-coded with

labels and marked with gas name according to NFPA 99 or ISO

7396. They can only connect to corresponding CHEMETRON Type

Quick Adapter. This is to prevent interchangeability of gas services,

hence ensures safety in medical supply. CHEMETRON Type Gas

Outlets are available in Wall and Console Types.

CHEMETRON TypeMedical Gas Outlets

Features and Benefits

Comply with NFPA 99 & CGA

Color coded according to USA standard

360˚ swivel inlet copper pipe for easy installation.

100% pressure and leak tested

Full range of mounting options

Available in Wall and Console Types

Connect to gas specific CHEMETRON Type Quick Adapters

152.

20m

m

126.90mm

12.70mm

63.95mm

165m

m

35.3

5mm

Wall TypeWall Type Gas Outlet includes finishing and rough-in assembly. The

finishing assembly has gas specific index corresponding to the gas

service on the rough-in assembly to prevent interchanging of gas

service. Each finishing assembly shall be color coded for its specified

gas service and processed by sandblasting treatment and painting.

The finishing assembly is intended for the level connection of the

medical gas wall outlets and filling up neighbor space. The rough-in

assembly is available in 1/2” K type copper pipe, which swivels 360˚

for easy installation.

Gases and Services

Oxygen

Air

Vacuum

Nitrous Oxide

Carbon Dioxide

WAGD

Dimensions

Console Type Gas Outlet includes finishing and rough-in assembly.

The finishing assembly has gas specific index corresponding to the

gas service on the rough-in assembly to prevent interchanging of

gas service. Each finishing assembly shall be color coded for its

specified gas service and be mounted for bedhead gas trunking

system. The rough-in assembly is available in 1/2” K type copper

pipe, which swivels 360˚ for easy installation.

Dimensions

Oxygen

Air

Vacuum

Nitrous Oxide

Carbon Dioxide

WAGD

Gases and Services

70.15mm

114.

50m

m

159m

m

58.70mm

12.70mm

22.30mm48.93mm

Console Type

mm

Exploded Diagram

Console Type

Wall Type

Wall Type

PAHSCO No. Description Specification

10322051 O2 1/2" COPPER TUBE10322052 VAC 1/2" COPPER TUBE10322053 AIR 1/2" COPPER TUBE10322054 CO2 1/2" COPPER TUBE10322055 N2O 1/2" COPPER TUBE10322056 WAGD 1/2" COPPER TUBE10322007 SLIDE 1/2" COPPER TUBE

Console Type


10434051 O2 1/2" COPPER TUBE10434052 VAC 1/2" COPPER TUBE10434053 AIR 1/2" COPPER TUBE10434054 CO2 1/2" COPPER TUBE10434055 N2O 1/2" COPPER TUBE10434056 WAGD 1/2" COPPER TUBE

Ordering Information

Distributor

4F, No.160, Daye Road, Beitou District, Taipei 11268, Taiwan

Tel: +886-2-2895-5050 Fax: +886-2-2897-8282

E-mail: [email protected]

www.pahsco.com.tw

www.pahsco.com.tw

Medical Gas OutletsCHEMETRON DISS

PAHSCO® CHEMETRON DISS Medical Gas Outlets are designed

with CGA’s concept of Diameter Index Safety System, and is

meant for medical gases at 200 psig or less. Gas outlets are

integral to medical gas supply system. PASHCO® CHEMETRON

DISS Gas Outlets comply with NFPA99 and CGA regulations. At

the same time, they pass various leak tests and connector stability

checks. A complete medical gas outlet includes finishing and

rough-in assembly. Moreover, PAHSCO® CHEMETRON DISS Gas

Outlets are color-coded with labels and marked with gas name

according to NFPA 99 or ISO 7396. They only accept

corresponding DISS Quick Adapter. This is to effectively eliminate

interchangeability of gas services, hence ensures safety in medical

supply. PASHCO® CHEMETRON DISS Gas Outlets are available

in Wall and Console Types.

CHEMETRON DISS Medical Gas Outlets

Features and BenefitsCE certified and UL listed

Comply with NFPA 99 & CGA

Color coded according to USA standard

360° swivel inlet copper pipe for installation from any angle

100% pressure and leak tested

Full range of mounting options

Available in Wall Type and Console Type

Connect to gas specific DISS Quick Adapter

Wall Type

CHEMETRON DISS Wall Outlet includes finishing and rough-in

assembly. The finishing assembly has gas specific index corresponding

to the gas service on the rough-in assembly to prevent interchanging of

gas service. Each finishing assembly shall be color coded for its

specified gas service and processed by sandblasting treatment and

painting. The finishing assembly is intended for the level connection of

the medical gas wall-outlets and filling up neighbor space. The rough-in

assembly is available in 1/2”, K type copper pipe, which swivels 360° for

installation from any angle.

Gases and Services

Dimensions

153

mm

127mm

12.70

165

mm

63.48mm

35.

35m

m

Oxygen

Medical Air

Vacuum

Carbon Dioxide

Nitrous Oxide

Nitrogen

WAGD

IAIR

CHEMETRON DISS Console Outlet includes finishing and rough-in

assembly. The finishing assembly has gas specific index

corresponding to the gas service on the rough-in assembly to

prevent interchanging of gas service. Each finishing assembly shall

be color coded for its specified gas service and be mounted for bed

head gas trunking system. The rough-in assembly is available in

1/2”, K type copper pipe, which swivels 360° for effortless

installation.

Console Type

Oxygen

Medical Air

Vacuum

Carbon Dioxide

Nitrous Oxide

Nitrogen

WAGD

IAIR

Gases and Services

70.30mm

114

.50m

m

12.70mm

159

mm

56.20mm 80mm

48.93 22.30

Dimensions

Exploded Diagram

Console Type

Wall Type

Ordering Information

Wall Type Rough-In Assembly


10322141 O2 1/2” COPPER TUBE10322143 AIR 1/2" COPPER TUBE10322146 VAC 1/2" COPPER TUBE10322144 CO2 1/2" COPPER TUBE10322142 N2O 1/2" COPPER TUBE10322145 N2 1/2" COPPER TUBE10322147 WAGD 1/2" COPPER TUBE10322148 IAIR 1/2" COPPER TUBE

Console Type Rough-In Assembly


10428251 O2 1/2" COPPER TUBE10428253 AIR 1/2" COPPER TUBE10428252 VAC 1/2" COPPER TUBE10428254 CO2 1/2" COPPER TUBE10428256 N2O 1/2" COPPER TUBE10428255 N2 1/2" COPPER TUBE10428257 WAGD 1/2" COPPER TUBE

10428258 IAIR 1/2” COPPER TUBE

Wall Type Service Kit

Console Type Service Kit

8040000031 O-ring Kit AIR, N2O, CO2, IAIR,N2

8040000032

8040000034

O-ring Kit O2

O-ring & Spring Kit VAC, WAGD


8040000031 O-ring Kit AIR, N2O, CO2

8040000032

8040000034

O-ring Kit O2, IAIR

8040000033 O-ring & Spring Kit N2O-ring & Spring Kit VAC, WAGD


Distributor

4F, No.160, Daye Road, Beitou Dist., Taipei 11268, TaiwanTel: +886-2-2895-5050 Fax: +886-2-2897-8282E-mail: [email protected]

www.pahsco.com.tw

Medical Gas OutletsCHEMETRON DISS

l Color-coded for easy gas service identification l Modular structure, convenient maintenancel German (DIN) Gas Outlet is CE listed and compliant with EN ISO 9170-1 and DIN 13620-2l British (BS) Gas Outlet is CE listed and compliant with HTM 02-01, ISO 9170-1 and BS 5682l Japanese (JIS) Gas Outlet is compliant with EN ISO 9170-1 and JIS T 7101

Solutions for Life

German / British / Japanese Medical Gas Outlets38X6 / 38X7 / 38X8

GENTEC® gas outlets are designed for delivery of medical gas from a central pipeline system. These outlets are 100% individually tested for leaks to ensure safety. The outlets are designed with safety in mind and comply fully with ISO 9170-1. Outlets are manufactured in an ISO 9001: 2008 and ISO 13485 registered facility.

Base Blockl High quality forged brass

38XX Series Medical Gas Outlets

Genstar Technologies Company., Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com

Specifications

German Standard

British Standard

Japanese Standard

Console Installation Bracket Flush Mount Surface Mount

The Inlet Pipe l Base block allows for the inlet pipe to be in- stalled in 6 different directions for ease of installationl Multiple connections available: 90o copper tubing, 180o copper tubing, 90o hose connection, 180o hose connection, 90o VCR connection, 180o VCR connection

Gas Specific Indexingl Prevents interchanging of gas service

Pressure Lidl Manufactured from high quality plastic l Uses color code for differentiating gas service

Bodyl Durable high quality forged brass bodyl The sealing ring can be replaced without interrupting gas service to other outletsl Body is compatible with previous model pressure lid



Dimensions units in millimeter(s)

M14X1.5

64

52

56

56

15

9074

46

24

6-M4

8

26548

63

64

3~5

M14X1.5

64

63

5

47

24

6-M4

63

5

47

2-M

4

62

MAX 82

45o45o

45o

45o

64

64

64

3~5

3~5 3~5

3~53~5

47.5

(DIN

)50

.5(B

S,J

IS)

47.5

(DIN

)50

.5(B

S,J

IS)

47.5

(DIN

)50

.5(B

S,J

IS)

47.5

(DIN

)50

.5(B

S,J

IS)

47.5

(DIN

)50

.5(B

S,J

IS)

47.5

(DIN

)50

.5(B

S,J

IS)

66 /

70

Hol

e si

ze

47.5

(DIN

)50

.5(B

S,J

IS)

55(D

IN)~

65(B

S)

66 /

70

Hol

e si

ze

47.5

(DIN

)50

.5(B

S,J

IS)

55(D

IN)~

65(B

S)

1. Pull the pressure lid off

2. Loosen the two retaining bolts 2-3 mm Pull out the body at an angle

3. Replace the sealing ring without disassembling the panel mount

1A. Pull the pressure lid and the decor off

Surface Mount

Flush Mount

Install hole



Dimensions units in millimeter(s)

Repair Schematics

Type of Mounting Configuration Type of Mounting Configuration

P / C

Flat-faced pressure lid, console type with console plate

P / B

Flat--faced pressure lid, console type with installation bracket

P2 / C

Flat--faced pressure lid with round decor,console type with console plate

P2 / B

Flat--faced pressure lid with round decor,console type with installation bracket



*: Please ask GENTEC or your local distributor for availability.

Ordering Information ( Console Type )

381 6 - V - S P08 - P / C

Series Type Gas Service

Inlet Direction

Inlet Connection

Lid Type

Type of Mounting

6: GSO (DIN)

7: BSO (BS)

8: JSO (JIS)

O: Oxygen

V: Vacuum

A: Air (400 kPa)

2: N2O

C: CO2*

N: N2-800*

A8: Air-800*

S: 90o

R: 180o

P08: Straight, O.D. of 8mm


HB4: Flexible hose: 1/4"


M14: Threading M14 X 1. 5VCR

P: Flat-faced pressure lid

P2: Flat-faced pressure lid

with round decor

C: With console plate

B: With installation bracket

Type of Mounting Configuration Type of Mounting Configuration

P / F

Flat-faced pressure lid, wall type,flush mount with protective cover

P / W

Flat--faced pressure lid, wall type,surface mount with protective cover

P1 / F

Flat-faced pressure lid with square decor, wall type, flush mount

P1 / W

Flat-faced pressure lid with square decor, wall type, surface mount



Ordering Information ( Wall Type )

*: Please ask GENTEC or your local distributor for availability.

382 6 - V - S P08 - P / F

Series Type Gas Service

Inlet Direction

Inlet Connection

Lid Type

Type of Mounting

6: GSO (DIN)

7: BSO (BS)

8: JSO (JIS)

O: Oxygen

V: Vacuum

A: Air (400 kPa)

2: N2O

C: CO2*

N: N2-800*

A8: Air-800*

S: 90o

R: 180o





M14: Threading M14 X 1. 5VCR

P: Flat-faced pressure lid

P1: Flat-faced pressure lid

with square decor

F: Flush Mount

W: Surface Mount

Documents

MEDICAL gAS WALL OUTLET QUICK CONNECT …® CHEMETRON Type medical gas outlets are integral to medical gas supply system. PAHSCO® CHEMETRON Type Gas Outlets comply with NFPA99 and