Embed Size (px)
Citation preview
German, British & Japanese Medical Gas Outlets
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
German, British & JapaneseMedical Gas Outlets
Features
•Colored-codedforeasygasserviceidentificationaccordingtoISO32•PressureLidcanbedisassembledduringmaintenance•Multipleassemblymethods•100%testedandindividuallypackaged•GermanStandardisCElistedandcompliantwithISO9170-1DIN13620-2•BritishStandardisCElistedandcompliantwithHTM02-01,ISO9170-1andBS5682-1998•JapaneseStandardiscompliantwithISO9170-1andJIST7101
British Standard Japanese Standard German Standard
Medical Suction Regulator
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Specifications
German, British & Japanese Medical Gas Outlets
GENTEC®gasoutletsaredesignedfordeliveryofmedicalgasfromacentralpipelinesystem.theseoutletsare100%individu-allytestedforleakstoensuresafety.TheoutletsfulfillISO9170-1andaremanufacturedinanISO9001:2000andISO13485certifiedmanufacturingfacility.
The Inlet Pipe
•Theswiveldesignallowstheinletpipetobeinstalledinsixdirectionsforeaseofinstallation•Multipleconnectionsavailable:90˚coppertubing,180˚coppertubing,90˚flexibleconnection,180˚flexibleconnection,90˚VCRconnection
Body
•Durablehighqualityforgedbrassbody•Thesealingringcanbereplacedwithoutinterruptinggasservicetootheroutlets•Bodyiscompatiblewithpreviousmodelpressurelid
Gas Service Indication Ring
•UsesISO32colorcodefordifferentiatinggasservice•Durableandconspicuous
Pressure Lid
•Manufacturedfromhighqualityaluminumalloy•Anodizedtoprotectagainstoxidationandcorrosion
Base Block
•Highqualityforgedbrass
Surface Mount2
Flush Mount3
Installation Mount4
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Configuration
German, British & Japanese Medical Gas Outlets
Base Block (Console)1
Base Block (Installation bracket)4
Base Block (In the wall)3
Base Block (On the wall)2
Socket (German)6
Socket (British)7
Socket (Japanese)8
Round-faced pressure lid with panel and protective cover
5
Round-faced pressure lid
SN
Flat-faced pressure lid
P
Flat-faced pressure lid with panel
P2
Please choose the base block, socket, pressure lid to meet your requirement(s)
Flat-faced pressure lid with panel and protective cover
P1
Flat-faced pressure lid with rotective sleve
P
Medical Suction Regulator
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
German, British & Japanese Medical Gas Outlets
Dimensions - units in millimeter(s)
German, British & Japanese Medical Gas Outlets
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
Dimensions - units in millimeter(s)
Surface Mount2
Flush Mount3
Install hole
Repair Schematics
1. Pull the pressure lid off 2. Loosen the two retaining bolts 2-3 mm
3. Pull out the body at an angle 3. Replace the sealing ring without disassembling the panel mount
Medical Suction Regulator
Genstar Technologies Company, Inc. 4525 Edison Avenue, Chino, CA 91710 T. 909.606.2726 F.909.606.6485 www.genstartech.com
German, British & Japanese Medical Gas Outlets
38Series
1Installation
6Type
VGas Service
SInlet Direction
P08Connection
SLid Options
1: Console2: Surface mount3: Flush mount4: Installation bracket
6: GSO7: BSO8: JSO
O: OxygenV: VacuumA: Air (400 kPa)2: N2OC: CO2
N:N2
MA7: Air (800kPa)
S: 90˚R: 180˚
P08: Straight, O.D. of 8mmHB4: Flexible hose: 1/4”HB5: Flexible hose 5/16”M14: Threading M14 x 1.5VCR
SN: Round-faced pressure lidS: Round-faced pressure lid with paneland protective coverP: Flat-faced pressure lid with protective slevePN: Flat-faced pressure lidP1: Flat-faced pressure lid with panel and protective coverP2: Flat-faced pressure lid with panel
Ordering Information
Doc. No.: GR-FLY-MEDEMGO0414 Rev. Level V1
