Connect2 Quick-Connect Medical Gas Outlets - O.E. … Quick-Connect Medical Gas Outlets ... accommodate any field piping arrangement. The primary gas check can be ... All specifications

Product Specification

Accepts both Chemetron® and Ohmeda® adapters in the same outlet

Push-button release for Chemetron adapters; Ohmeda adapters are twist-released

Cleaned for oxygen service

Safety keyed to help prevent cross-connections

Conforms to NFPA and CGA

UL and CSA approved

Description

The Allied Connect2® medical gas outlet stations

provide convenient access to medical gases in

patient care locations. They accept either a

Chemetron or Ohmeda adapter in the same

outlet.

The outlets are field-gangable in any order desired

by the facility. Outlets are spaced 5" (12.7 cm)

center to center. Outlet finish plates and rough-in

plates are pin indexed using steel pins for positive

cross-connection prevention. Primary valves are

separate from the finish plate, allowing easy

testing for leaks and cross connection. Primary

valves are made of brass and contain a chrome-

plated self-sealing poppet. Primary valves are

field-adjustable to compensate for variations in

plaster thickness of 1/2" to 3/4". Outlets may be

special ordered with extended valve bodies that

allow for an additional 3/8" or 3/4" adjustment.

The type K copper inlet tube has a 1/2" OD

connection, and can rotate 360 degrees to

accommodate any field piping arrangement.

The primary gas check can be serviced without

shutting off the gas supply.

Finish plates consist of a stainless steel insert

surrounded by a silver metallic-finish ABS high-

impact decorative trim.

Elements

Connect2® Quick-Connect Medical Gas Outlets

Connect2 Quick-Connect Medical Gas Outlets


Dimensional Data

Refer to installation instructions prior to assembly.


Safety keyed to help prevent cross-

connections

Conforms to NFPA 99 and CGA standards

Built-in push-button latch release mechanism

Modular design


UL listed

Description

The Chemetron® 500 Series outlet stations


patient care locations. They are fully compatible

with Chemetron style latch-keyed adapters.



center to center, and may be ganged with

Chemetron modular electrical assemblies in a

console arrangement. Outlet finish plates and

rough-in plates are pin indexed using steel pins for

positive cross-connection prevention. Primary

valves are separate from the finish plate, allowing

easy testing for leaks and cross connection.

Primary valves are made of brass and contain a

chrome-plated self-sealing poppet. Primary

valves are field adjustable to compensate for

variations in plaster thickness of 1/2" to 3/4".

Outlets may be special ordered with extended

valve bodies that allow for an additional 3/8" or

3/4" adjustment.




The primary gas check can be serviced without

shutting off the gas supply.




Elements

500 Series Chemetron®

Quick-Connect Medical Gas Outlets

500 Series Chemetron Quick-Connect Medical Gas Outlets

Dimensional Data




Safety keyed to help prevent cross-connections

Conforms to NFPA 99 and CGA/DISS

standards

Modular design


UL listed

Description

The Chemetron® 560 Series DISS outlet stations


patient care locations. They are fully compatible

with DISS style diameter indexed threaded

adapters.



center to center, and may be ganged with

Chemetron modular electrical assemblies in a

console arrangement. Outlet finish plates and

rough-in plates are pin indexed using steel pins for

positive cross-connection prevention. Primary

valves are made of brass, nickel-plated, and

contain a self-sealing poppet. Primary valves are

field adjustable to compensate for variations in

plaster thickness of 1/2" to 3/4". Outlets may be

special ordered with extended valve bodies that

allow for an additional 3/8" or 3/4" adjustment.







Elements

560 Series DISS Medical Gas Outlets

560 Series DISS Medical Gas Outlets


Dimensional Data



• Conforms with NEC requirements

• Hospital grade receptacles

• Modular design

• Combines with Chemetron® 500/560 Series Medical Gas Outlet Stations

• Blank modules for custom services

• UL listed components

Description

The Chemetron 580 Series modular electrical devices provide a convenient method to provide electrical services in patient care locations. They gang with any modular outlet or another modular electrical device to provide a finished console. The modular electrical devices are field-gangable in any order desired by the facility.

The devices include the electrical mechanism and two-gang galvanized steel electrical boxes mounted in a zinc-plated steel mounting plate for corrosion resistance and fire safety. Finish plates are die-cast zinc, chrome-plated for appearance and to match Chemetron modular gas outlets. A blank version is available for field punching to mount non-standard devices.

Elements

580 Series Electrical Devices

Catalog Number Quantity Device Description

64-07-0001 120V 20 AMP 23000HG Twist Lock

64-07-0010 120V 15 AMP 8200HG Ivory Duplex

64-07-0011 120V 15 AMP 8200HG Red Duplex

64-07-0020 120V 20 AMP 8200HG Ivory Duplex

64-07-0021 120V 20 AMP 8200HG Red Duplex

64-07-0030 120V 15 AMP 8200HG SC62 Safety Ivory Duplex

64-07-0031 120V 15 AMP 8200HG SC62 Safety Red Duplex

64-07-0040 Switch Ivory SPST

64-07-0041 Switch Red SPST Lighted Handle

64-07-0042 Switch Ivory 3-Way

64-07-0060 Ground SLR 3S Double

64-07-0070 Blank

Ordering Information

580 Series Electrical Devices


1720 Sublette Avenue St. Louis, MO 63110 USA (314)771-2400 www.alliedhpi.com ISO 9001 CERTIFIED

Customer Service: USA: (800) 444-3960 FAX: (314) 771-7537 Canada/Mexico: (800) 446-0552 FAX: (800) 246-6201 International: (314) 268-1683 FAX: (314) 771-5183

All specifications are nominal and subject to change without notice.

Warranty: See Allied Statement of Warranties for details.

Form 64-00-0004 November 2005

© 2005 Allied Healthcare Products, Inc.® Printed in USA

Dimensional Data



• Safety keyed to help prevent cross-connections

• Conforms to NFPA 99

• Rough-in channel box protected by metal plaster guard until final assembly

• Adjustable valve mechanism to compensate for variations in plaster thicknesses up to 3/8"

• Cleaned for oxygen service

• UL listed

Description

The Chemetron® 400 Series outlet stations provide convenient access to medical gases in patient care locations. They are fully compatible with Chemetron-style latch-keyed adapters. Finish plates are stainless steel with a satin finish. Outlet finish plates and rough-in plates are safety keyed for positive cross-connection prevention. Primary valves are separate from the finish plate, allowing easy testing for leaks and cross-connection. Primary valves are made of brass and contain a chrome-plated self-sealing poppet. Primary valves are field adjustable to compensate for variations in plaster thickness of 1/2" to 3/4". The type K copper inlet tube has a 1/2" OD connection. The primary gas check can be serviced without shutting off the gas supply. The outlet stations are fully compliant with NFPA 99 1999 and CSA Z-305, and are cleaned for oxygen service in accordance with CGA G-4.1. The outlet is UL listed.

The latch release is color-coded and labeled for the gas service. Release is easily accomplished with one hand using a latch release. The primary valve poppet provides a dust-proof seal. Vacuum outlets may be used with or without slide brackets for vacuum collection bottles of up to 1/2-gallon capacity. (Where slide brackets are used, order one per vacuum outlet.)

Elements

400 Series Chemetron® Quick-Connect Medical Gas Outlets


400 Series Chemetron Quick-Connect Medical Gas Outlets

Dimensional Data



• Accepts both Chemetron® and Ohmeda® adapters in the same outlet

• Conforms to NFPA 99 and CGA standards.

• Safety keyed to help prevent cross-connections

• Rough-in channel box protected by metal plaster guard until final assembly

• Adjustable valve mechanism to compensate for variations in plaster thicknesses up to 3/4"


• UL listed and CSA approved

Description

The Allied Connect2® medical gas outlet stations provide convenient access to medical gases in patient care locations. They accept either a Chemetron or Ohmeda adapter in the same outlet. Finish plates are color-coded plastic with stainless steel inserts. Outlet finish plates and rough-in plates are safety keyed for positive cross-connection prevention. Primary valves are separate from the finish plate, allowing easy testing for leaks and cross connection. Primary valves are made of brass and contain a self-sealing poppet. Primary valves are field adjustable to compensate for variations in plaster thickness of 1/2" to 3/4". Outlets may be special ordered with extended valve bodies that allow for an additional 3/8" or 3/4" adjustment. The type K copper inlet tube has a 1/2" OD connection. The primary gas check can be serviced without shutting off the gas supply.

The outlet stations are fully compliant with NFPA 99 and CSA Z-305, and are cleaned for oxygen service in accordance with CGA G-4.1. The outlet is UL listed. Release is easily accomplished with one hand using a push-button release (or twist release for Ohmeda style adapters). The primary valve poppet provides a dust-proof seal. Vacuum outlets maybe used with or without slide brackets for vacuum collection bottles of up to 1/2-gallon capacity. (Where slide brackets are used, order one per vacuum outlet.)

Elements

400 Series Connect2® Medical Gas Outlets

400 Series Connect2 Medical Gas Outlets


Dimensional Data



Safety-keyed to help prevent cross-connections

Conforms to NFPA 99

Rough-in channel box protected by metal plaster

guard until final assembly

Adjustable valve mechanism to compensate for

variations in plaster thicknesses up to 3/8"


UL listed

The Chemetron® DISS outlet stations provide

convenient access to medical gases in patient care

locations. They are fully compatible with DISS

style diameter indexed threaded adapters.

The face plate is stainless steel with a satin finish.

Outlet finish plates and rough-in plates are safety

keyed for positive cross-connection prevention.

Primary valves are made of brass and contain a

chrome-plated self-sealing poppet. Primary

valves are field-adjustable to compensate for

variations in plaster thickness of 1/2" to 3/4".

Outlets may be special ordered with extended

valve bodies that allow for an additional 3/8" or

3/4" adjustment.


connection. The primary gas check can be

serviced without shutting off the gas supply.

The outlet stations are fully compliant with

NFPA 99 1999 and are cleaned for oxygen service

in accordance with CGA G-4.1. The outlet is

UL listed.

Vacuum outlets may be used with or without slide

brackets for vacuum collection bottles of up to

1/2-gallon capacity. (Where slide brackets are

used, order one per vacuum outlet.)

Elements

460 Series Chemetron®

DISS Medical Gas Outlets

Description

460 Series Chemetron DISS Medical Gas Outlets


Gas Service

Top

Inlet Connection

Quantity

Oxygen 64-35-0001

Vacuum 64-35-0004

Air 64-35-0002

Nitrous Oxide 64-35-0005

Evacuation Vacuum 64-35-0009

Carbon Dioxide 64-35-0003

Oxygen/CO2 (CO2 less than 7%) 64-35-0008

Nitrogen 64-35-0010

Slide Bracket 64-59-1212


Materials

Component Material

Valve Body Machined Brass

Viton Seal

Valve Block Brass Forging/Machined Brass

Type K or L Seamless Copper Tube

Viton Seal

Outlet Box 20 Gauge Steel

Cover Plate Stainless Steel

#4 Satin Finish

Buffed Edge

Plastic Color-Coded Release Button

460 Series Chemetron DISS Medical Gas Outlets


Dimensional Data

Refer to installation instructions prior to assembly. Refer to installation instructions prior to assembly. Refer to installation instructions prior to assembly.


• Safety keyed to prevent cross-connections

• Conforms to NFPA 99 and CSA standards

• Accepts Med*Star and ‘07 Series Adapters

• Modular design


• UL Listed

Description

The Oxequip® Med*Star® Series outlet stations provide

convenient access to medical gases in patient care locations. They are fully compatible with Med*Star and ’07 Series adapters.

The outlets can be grouped together in any order desired by the facility. Outlets are spaced 5" (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. Valve bodies are separate from the finish plate, allowing easy testing for leaks and cross connection, and contain a self-sealing poppet. Valve bodies are field adjustable to compensate for variations in plaster thickness of 12.7 mm (1/2") to 19 mm (3/4").

The 152.5 mm (6") Type K copper inlet tube has a 9.5 mm (3/8") ID (12.7 mm (1/2") OD) connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply.

The cam plate contains a positive latching mechanism to retain the adapter in the outlet. The adapter is removed by operating the release mechanism which is integral to the Med*Star adapter (’07 Series adapters use the twist mechanism).

All components (cam plate, tumbler, valve body, poppet, faceplate) are individually field replaceable.

Elements

Oxequip® Med*Star® Quick-Connect Medical Gas Outlets

Oxequip Med*Star Quick-Connect Medical Gas Outlets


Dimensional Data



• Safety keyed to prevent cross-connections

• Conforms to NFPA 99 and CSA standards

• Modular design


• UL Listed

Description

The Oxequip Diameter Index Safety System (DISS) Series outlet stations provide convenient access to medical gases in patient care locations. They are fully compatible with DISS style diameter indexed threaded adapters. The outlets can be grouped together in any order desired by the facility. Outlets are spaced 5" (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. The chrome-plated brass valve bodies contain a self-sealing poppet, and are separate from the finish plate, allowing easy testing for leaks and cross connection. Valve bodies are field adjustable to compensate for variations in plaster thickness of 12.7 mm (1/2") to 19 mm (3/4").

The 152.5 mm (6") Type K copper inlet tube has a 9.5 mm (3/8") ID (12.7 mm (1/2") OD) connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply.

Elements

Oxequip® Med*Star® DISS Medical Gas Outlets

Oxequip Med*Star DISS Medical Gas Outlets


Dimensional Data



Inlet and outlet pressure gauges

0-300 psig (0 kPa-2067 kPa)

250 psi maximum working pressure

Flows to 27 cfm (764 lpm) at 150 psig

(1035 kPa)

Quarter-turn shutoff valve

Remote outlet capability

Factory pre-piped assembly

Adjusts for plaster variations to 3/4"

Description

Pressurized Gas Control Panel shall be designed

to deliver variable pressures to power pneumatic

surgical tools. The unit shall have inlet supply

gauge, 0-300 psig (0 kPa to 2067 kPa) to indicate

the supply line pressure.

Located immediately upstream of this gauge shall

be a supply line shut off valve, rated at not less

than 250 psig (1722.5 kPa) pressure. A quarter

turn of the valve handle shall be required to

obtain a fully open or closed position.

An adjustable relieving type pressure regulator

with an operating range of 0-250 psig (0 kPa to

17.55 kPa) shall provide required pressure to the

gas service outlet.

There shall be an outlet supply gauge, 0-300 psig

(0 kPa to 2067 kPa) to give indication of the

outlet pressure being supplied to the outlet(s).

The pressurized control panel shall be pre-piped

internally, requiring only external supply line

connection(s).

Additional outlets in the same room may be

connected to the remote outlet pigtail furnished

in the control panel. Remote outlets shall be

regulated by the adjustable pressure regulator

within the panel and shall match the pressurized

control panel outlet.

Elements

Pressurized Gas Control Panel

Metal Faceplate

Polymer Faceplate

Pressurized Gas Control Panel


1720 Sublette Avenue

St. Louis, MO 63110 USA

(314) 771-2400

www.alliedhpi.com

ISO 9001 CERTIFIED

Customer Service:

USA: (800) 444-3960

FAX: (314) 771-7537

Canada/Mexico: (800) 446-0552

FAX: (800) 246-6201

International: (314) 268-1683

FAX: (314) 771-5183

All specifications are nominal and subject to change

without notice.

Warranty:

See Allied Statement of Warranties for details.

Form 75-00-0003 Rev. March 2013

© 2013 Allied Healthcare Products, Inc.® Printed in USA


Dimensional Data

Panel Type Outlet Fitting Faceplate

Construction Part Number Quantity

Nitrogen DISS Metal 75-20-0005

Nitrogen DISS Polymer 75-20-0005-P

Nitrogen DYNA-CON Metal 75-20-0006

Nitrogen DYNA-CON Polymer 75-20-0006-P

Nitrogen SCHRADER Metal 75-20-0007

Nitrogen SCHRADER Polymer 75-20-0007-P

Instrument Air DISS Metal 75-20-0008

Instrument Air DISS Polymer 75-20-0008-P

Documents

Connect2 Quick-Connect Medical Gas Outlets - O.E. … Quick-Connect Medical Gas Outlets ... accommodate any field piping arrangement. The primary gas check can be ... All specifications