Measurement and display units for valve technology

2

Various methods of measuring for diff erent areas of application

In addition to process valves, GEMÜ provides an entire series of measurement and display units for valves. The current product range includes various fl owmeters as well as a selection of technologies for temperature, pressure and level measurement systems. The portfolio is complimented by display units for sensor systems.

For fl ow measurement systems, GEMÜ off ers a variety of designs: variable area fl owmeters, fl ow transmitters, magnetically inductive fl owmeters and ultrasonic fl owmeters.All measurement devices have in common that they are characterised with a robust construction and are simple to integrate into a system.

www.gemu-group.com 3

Table of contents

Flow measurement systems 4 - 8

Pressure measurement systems 9 - 11

Level measurement systems 12

Temperature measurement systems 13

Display units for sensor systems 14

GEMÜ manufacturing sitesand sales locations worldwide 15

4

Flow measurement systems

A measuring fl oat is lifted by the volumetric fl ow in a conical metering tube until equilibrium is achieved between the weight of the measuring fl oat and the force caused by the fl ow resistance. The measuring fl oat is lifted higher or lower according to the volume fl ow rate.

GEMÜ 800/850Features• Variable area principle • For corrosive, inert gaseous and liquid media• Corrosion resistant, robust and high chemical resistance• Optional electrical limit switches or instrument sensor

Technical specifi cations:Tube material: Trogamid-TTM, polysulphone, PVC,

PVDFMeasuring range: From 2 l/h to 20,000 l/h for liquids and

0.2 Nm³/h to 450.0 Nm³/h for airAvailable sizes: DN 10 to 65Connection: By union ends with insert

GEMÜ 840Features• Part fl ow principle • Consists of main fl ow unit, orifi ce plate, part fl ow unit, manual

diaphragm valves • For corrosive and inert liquid media • Robust, high chemical resistance• Optional electrical limit switches or instrument sensor

Technical specifi cations:Housing material : PVC-U, grey, PPMeasuring range: From 3,000 l/h to 50,000 l/hAvailable sizes: DN 65Connection: By solvent cement or welded spigots

www.gemu-group.com 5

GEMÜ 1250/1251/1252/1256/1257Limit switches

Features• Suitable for GEMÜ fl owmeters with magnetic fl oat• Simple mounting and setting by clamping to fl owmeter• Reed contacts are actuated by the magnet in the fl oat

Technical specifi cations:GEMÜ 1250: With bistable reed contact with SPDT

(Single Pole Double Throw) contactGEMÜ 1251 - 1257: With bistable reed contact for Min or

Max limit valueOption: ATEX

GEMÜ 1270-1273Instrument sensors

Features• Suitable for GEMÜ fl owmeters with magnetic fl oat • For continuous fl ow monitoring• Simple mounting and setting by clamping to fl owmeter• Reed contacts in a chain of resistors are actuated by the

magnet in the fl oat

Technical specifi cations:GEMÜ 1270/1271: The signal reading is eff ected via

voltage divider (0-10kOhm)GEMÜ 1272/1273: The signal reading is eff ected via

integrated 2-wire measuring trans-ducer (4-20mA)

GEMÜ 1270/1271: ATEX optional

6

Flow measurement systems

Turbine fl ow transmitters

These can be used either as pure measuring turbines or as totalizers or batch controllers for measuring ranges from 120 to 25,000 l/h. The measuring turbines provide various electrical output signals for further processing.

GEMÜ 3020Flow transmitter (Turbine)

Features• For inert and corrosive aqueous liquids • Connection by metric or imperial union ends with insert

Technical specifi cations: Turbine material : PVDFTurbine body material: PVDF / PVC-U, greyAvailable sizes: DN 25 / DN 50Measuring range: DN 25: 120 to 3600 l/h

DN 50: 500 to 25000 l/hPower supply: 24 V DCFrequency output: 24 V PNPCurrent output: 4 to 20 mA

GEMÜ 3021Flow transmitter, totalizer or batch controller

Features• Measuring transducer with totalizer or batch controller• For inert and corrosive aqueous liquids • Electronic system enables adjustment to operating conditions • Signal inputs for PLC or switching signals• Connection by metric or imperial union ends with insert

Technical specifi cations: Turbine material : PVDFTurbine body material: PVDF / PVC-U, greyAvailable sizes: DN 25 / DN 50Measuring range: DN 25: 120 to 7200 l/h

DN 50: 500 to 25000 l/hPower supply: 24 V DCOutputs depending on type: Frequency 24 V PNP;

current 0/4 to 20 mA; 2 x relay

www.gemu-group.com 7

Magnetically inductive fl owmeter

The GEMÜ 3030 mFlow fl owmeter operates according to the magnetically inductive measurement principle. It is suitable for electrically conductive media and enables exact measurement of fl ow velocities and fl ow rates of inert and corrosive liquids. The simple mechanical construction of the GEMÜ 3030 mFlow magnetically inductive immersion-type fl owmeter off ers quick and easy installation. The device has a backlit display and is operated via a membrane key-pad at the front of the housing. Electrical connections are at the rear.

GEMÜ 3030 mFlowFeatures• Same measurement device can be used for diff erent nominal

sizes• No moving parts in the medium• Access rights via diff erent user levels• Integrated Web browser capability• Simple commissioning and versatile operating facilities

- Fascia keys- PC connection with Internet browser - Fieldbus interfaces e.g. Profi bus-DP

Technical specifi cations:Available sizes: DN 25 to 300Temperature range: 0 to 135 °CConnection: By various fi ttingsTemperature sensor: optionalPower supply: 24 V DCMeasuring range: 0 to 4 m/s, 0 to 10 m/sOutput signals: 0 / 4 to 20 mA;

pulse; relayFieldbus interface: Profi bus DPConductivity of medium: ≥ 20 μS/cm

8

Ultrasonic fl owmeter

The GEMÜ C38 SonicLine® is an ultrasonic fl owmeter operating according to the phase diff erence method. The metering tube is made of PFA and can be directly integrated into the piping system by standard fl are unions. The medium only contacts the metering tube. The electronic housing is made of PP. The connection cables are PTFE encapsulated.

GEMÜ C38 SonicLine®

Features• High accuracy and repeatability• Suitable for very dynamic processes (dosing time < 1s)• Integrated dosing function• No moving parts in the metering tube and thus subject to low

wear• All media wetted parts are made of PFA (HP quality)• Excellent chemical resistance• Minimal deadleg• Empty pipe signal• Compact design

Technical specifi cations:Nominal size : ⅜" to 1"Measuring range: 0.03 to 120 l/minConnection: Flare connectionTube material: PFA-HPPower supply: 24 V DCMedia temperature: 0 to 80 °CAccuracy: ± 1 % of measuring rangeOutput signals: 4 to 20 mA; pulse

Flow measurement systems

www.gemu-group.com 9

Pressure measurement systems

The GEMÜ 3120 is available in various diff erent versions for the pressure measurement systems area. The devices are available as pressure transducers, diff erential pressure transducers and diff erential pressure measurement devices. The HydraLine® series (GEMÜ C30, C31, C32) comprises pressure transmitters and pressure measurement devices for high purity media applications.

GEMÜ 3120Pressure/diff erential pressure transducer

Features• The pressure transducer converts the physical variable

pressure proportionally into an electrical signal• The diff erential pressure transducer measures the physical

variable pressure at 2 measuring points and converts the diff erential into an electrical signal. Plus and minus diff erentials are evaluated.

• GEMÜ 3120 is available as a 2-wire transducer (4-20 mA) and as a pressure measurement device with either current (0/4-20 mA) or relay output (adjustable MIN and MAX switch points)

Technical specifi cations:Measuring range: 0 to 10 barSensor material: Stainless steel 1.4401 / 1.4301 or

ceramics with PTFE diaphragmConnecting element: PVDF Current output: 0/4 to 20 mAPower supply: 24 V DCMedia temperature: -10 to 60 °C

10

GEMÜ C30 Hydra-GaugePressure gauge

Features• Especially suitable for pressure measurement of ultra high

purity chemicals• All media wetted parts are made of PFA/PTFE (HP quality)• Pressure transmission by double diaphragm technology• Pressure gauge can be rotated through 360°• Optionally with electrical switching contacts• REACH / ROHS compliant• Other certifi cates on request (e.g. FDA compliance)

Technical specifi cations:Nominal size : ¼" to 1¼" (In-Line, Dead-End)Operating pressure: 0 to 6 barConnection: Flare connection, NPTValve body material: PFA-HP, PTFEDiaphragm material PFAMedia temperature: 5 to 60 °CAccuracy: ± 1,6 % of measuring range

or scale end value

Pressure measurement systems

www.gemu-group.com 11

GEMÜ C31 Hydra-SensorPressure transmitter

Features• Especially suitable for pressure measurement of ultra high

purity chemicals• All media wetted parts are made of PFA/PTFE (HP quality)• Pressure transmission by double diaphragm technology• Pressure transmitter can be rotated through 360°• Protection class IP 65 or IP 67 (depending on version)• REACH / ROHS compliant• Other certifi cates on request (e.g. FDA compliance)

Technical specifi cations:Nominal size : ¼" to 1¼" (In-Line, Dead-End)Operating pressure: 0 to 6 barConnection: Flare connection, NPTValve body material: PFA-HP, PTFEDiaphragm material PFAPower supply: 10 to 30 V DCMedia temperature: 5 to 60 °CAccuracy: ≤0.5 % of measuring spanOutput signals: 4 to 20 mAOption: Digital display

GEMÜ C32 Hydra-DryMeasuring transducer with ceramic sensor

Features• Especially suitable for pressure measurement of ultra high

purity chemicals• All media wetted parts are made of PFA/PTFE (HP quality)• The pressure is transmitted by a ceramic sensor• The sensor is isolated from the process by a double

diaphragm system• Protection class IP 67• REACH / ROHS compliant• Other certifi cates on request (e.g. FDA compliance)

Technical specifi cations:Nominal size: ¼" to 1¼" (In-Line, Dead-End)Operating pressure: 0 to 6 barConnection: Flare connection, NPTValve body material: PFA-HP, PTFEDiaphragm material PFAPower supply: 12 to 30 V DCMedia temperature: 0 to 60 °CAccuracy: ≤0.5 % of measuring spanOutput signals: 4 to 20 mAOption: Digital display with switch points

12

Level measurement systems

GEMÜ provides level transmitters with fl oat for detection of measured values and plant automation. They are installed via a threaded adapter and DIN/ANSI fl anges.

GEMÜ 902Level transmitter

Features• On reed contact basis • For monitoring liquid levels of inert and corrosive media• Independent of: pressure, conductivity, concentration,

density• Direct reading of medium level

Technical specifi cations:Media wetted parts: Choice of: PP, PVDF,

PVC-U, stainless steelVersion: With limiting contacts (monostable)

or working contacts (bistable)Supply voltage: Uv ≤ 40 VDCTemperature range: -10 to 80 °C

GEMÜ 910Level transmitter

Features• On reed contact basis / chain of resistors • For monitoring liquid levels of inert and corrosive media • Independent of: pressure, conductivity, concentration,

density• Direct reading of medium level • Continuous linear measuring signal• Compatible with the digital multifunction device GEMÜ 1276

for optical indication and signal evaluation, e.g. limit switch points

Technical specifi cations:Media wetted parts: Choice of: PP, PVDF,

PVC-U, stainless steelVersion: With chain of resistors or 2-wire

transducer (4-20mA)Supply voltage: With chain of resistors: Uv ≤ 40 VDC;

2-wire transducer: Uv = 11V to 40 V (dependent on load resistor)

Temperature range: -10 to +80 °C

www.gemu-group.com 13

Temperature measurement systems

GEMÜ 3220Features• High accuracy and repeatability• No moving parts and thus subject to low wear

Technical specifi cations:Measuring range: 0 to 100 °CSensor material: Ceramics

(option encapsulated in PVDF)Connecting element: PVDF Version: 2-wire transducer or 4-wire

temperature measurement device with display

Current output: 0/4 to 20 mAPower supply: 24 V DCProcess connection: Dependent on the version:

G ½" or G ¾" thread

Temperature transducer and temperature measurement device with integrated display

The GEMÜ 3220 temperature transducer converts the physical variable temperature proportionally into an electrical signal. The process connection is confi gured as standard with male threads to DIN 3852 in sizes G 1/2 and G 3/4. The electrical connection is via a plug complying with DIN EN 175301-803 form A. The installation position is optional. After screwing in the connecting element, the upper part of the housing can be rotated up to ±180° to the required position by loosening the fastening screws. Media wetted components are made of PVDF or ceramics, the housing is made of ABS and the seal of FPM.

14

Display units for sensor systems

GEMÜ 1276Universal display unit

Suitable for use in the engineering industry, laboratory equipment and process plant. A display of up to 5 digits shows the various measured values (pressure, temperature, fl ow).

Features• Universal, digital display unit for use with all common

measurement units • 4 or 5 -digit LED display• Input signal: 0 to 10 VDC, 0/4 to 20 mA• Power supply: 24 VDC, 115 VAC, 230 VAC• Option with sensor supply: 10 VDC or 24 VDC• Option with analogue output: 0 to 10 VDC, 0/4 to 20 mA• Option with RS232 interface• Option: 2 or 4 relay switch points freely adjustable• Input for frequency: Version ZF

15

AFRICA GEMÜ Valves Africa Pty. LtdPhone: +27(0)11 462 7795Fax: +27(0)11 462 4226office@gemue.co.za

AUSTRALIAGEMÜ Australia Pty. LtdFax: +61-2-43 23 44 96mail@gemu.com.au

AUSTRIAGEMÜ GmbHPhone: +43 22-36 30 43 45-0Fax:+43 22-36 30 43 45-31info@gemue.at

BELGIUMGEMÜ Valves bvba/sprlPhone: +32 2 702 09 00Fax: +32 2 705 55 03info@gemue.be

BOSNIA/HERCEGOVINAALTERA d.o.o.Phone: +387 51 434 311Fax: +387 51 434 311altera@blic.net

BRAZIL / SOUTH AMERICA

GEMÜ Indústria de ProdutosPlásticos e Metalúrgicos Ltda.Phone: +55-41-33 82 24 25Fax: +55-41-33 82 35 31gemu@gemue.com.br

BULGARIAGEMÜ GmbHPhone: +43-22-36 30 43 45-0Fax:+43 22-36 30 43 45-31info@gemue.at

CANADAGEMÜ Valves Canada Inc.Phone: +1-450-902-2690Fax: +1-404-3 44 4003info@gemu.com

CHINA GEMÜ Valves (Shanghai) Co., LtdPhone: +86-21-2409 9878info@gemue.com.cn

CROATIASTRIX d.o.o.Phone. +38 51 23 70 381Fax +38 51 23 70 675strix@zg.t-com.hr

CZECH REPUBLICFluidtechnik Bohemia s.r.o.Phone: +420 548 213 233-5Fax: +420 548 213 238brno@fluidbohemia.cz

DENMARKGEMÜ ApSPhone: +45 70 222 516 Fax: +45 70 222 518info@gemue.dk

EGYPTNoaman Engineering Co.Phone: +20-2-33 47 21 57Fax: +20-2-33 03 18 79

ESTONIA/LATVIAUAB BiotechaPhone: +370 5 270 90 55Fax: +370 5 270 90 56info@biotecha.lt

FINLANDGemü OyPhone: +35-89-82-54-14-0Fax: +35-89-82-54-14-13orders@gemue.fi

FRANCEGEMÜ S.A.SPhone: +33-3 88 48 21 00Fax: +33-3 88 49 12 49info@gemu.frINTERCARATPhone: +33-3 88 48 21 20Fax: +33-3 88 49 14 82sales@intercarat.com

GERMANY GEMÜ Gebr. Müller GmbH & Co. KGPhone: +49-79 40-12 30Fax: +49-79 40-12 31 92 (Domestic) Fax:+49-79 40-12 32 24 (Export)info@gemue.de

GREAT BRITAIN / UK GEMÜ Valves LtdPhone:+44-19 25-82 40 44Fax:+44-19 25-82 80 02info@gemu.co.uk

GREECEA. Stamopoulos Industrial ProductsPhone: +30-210-7798 663Fax: +30-210-7473 359astamop@otenet.gr

GUATEMALAProyect, Guatemala S.A.Phone: +502 2429-0202Fax: +502 2476-7439guatemala@grupoproyect.com

HONG KONGGEMÜ Valves (Shanghai) Co., LtdPhone: +86-21-64 42 65 52Fax +86-21-64 89 18 85info@gemue.com.cn

HUNGARYMULTIVALVE Kft.Fax: +36 1306 4491iroda@multivalve.hu

INDIAGEMÜ IndiaRepresentative Office Phone: +91-79-64505560sales@gemu.in

INDONESIAGemu Valves Pte Ltd(Indonesia Representative Office)Phone: +62 (21) - 6231 0035Fax +62 (21) - 2907 4643info@gemu.co.id

IRANSINARAD Kala Co., LtdPhone: +98-21- 22096277, 22095187Fax: +98-21-22096811GEMU@sinarad.com

IRELANDGEMÜ Ireland LtdPhone: +353 (0)21 4232023Fax: +353 (0)21 4232024info@gemu.ie

ISRAELTreitelChemical Engineering LtdPhone:+972-3-9 78 77 77Fax:+972-3-9 23 29 28gemu@treitel.co.il

ITALYGEMÜ S.r.l.Phone: +39-02-40044080Fax: +39-02-40044081info@gemue.it

JAPANGEMÜ Japan Co., Ltd.Phone: +81-52-936-2311Fax: +81-52-936-2312info@gemu.jp

LITHUANIAUAB BiotechaPhone: +370 5 270 90 55Fax: +370 5 270 90 56info@biotecha.lt

MACEDONIAEurocons Group d.o.o.Phone: +381 13 801 460Fax: +381 63 394 790borko@eurocons.co.yu

MALAYSIAGEMU VALVES PTE LTD(Malaysia Representative Office)Phone: +(603)- 7832 7640Fax: +(603)- 7832 7649info@gemu.com.sg

MEXICOGEMU Valvulas S.A. de C.V.German Centre 01210 Mexico, D.F., MexicoPhone: +52 55 7090 4161 +52 55 7090 4179

NETHERLANDSStartflow B.V.Phone: +31-8 80 04 46 00info@startflow.nl

NEW ZEALANDGEMÜ Australia Pty.Phone: +61-2-43-23 44 93Fax: +61-2-43-23 44 96mail@gemu.com.au

PHILIPPINESGEMÜ Valves PTE. LtdPhone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg

POLANDAFT Sp. Z. o.oPhone: +48-61-8 20 51 45Fax: +48-61-8 20 69 59aft.poznan@aft.pl

PORTUGALContimetra-Instrumentos Industriais, LdaPhone: +351-21-4 20 39 00Fax: +351-21-4 20 39 01industria@contimetra.com

ROMANIA String S.R.L. RomaniaPhone: +40 238 72 62 80Fax: +40 238 71 58 00info@string.ro

RUSSIA OOO „GEMÜ GmbH“Phone: +7 495 980 662 58 35Fax: +7 495 980 662 58 35info@gemue.ru

SERBIA Eurocons Group d.o.o.Phone: +381 13 801 460Fax: +381 13 837 250info@eurocons.rs

SINGAPOREGEMÜ Valves PTE. LtdPhone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg

SLOVAKIAEURO-VALVE s.r.o.Phone. +421 31 705 5007Fax +421 31 705 5007euro-valve@euro-valve.com

SLOVENIAGeneral Industry, Water Treatment, Plastic Piping Systems Strix Inziniring d.o.o.Phone: +386 1 54 66 050Fax: +386 1 54 66 058info@strix-inz.siPharma, Biotech, Food Ipros d.o.o.Phone: +386 1 200 26 20Fax: +386 1 423 18 24ipros@ipros.si

SOUTH KOREAJID Corporation Co. LtdPhone: +82-2-326-5545Fax: +82-2-326-5549master@jidcorp.com

SPAINELION, S.A.Phone: +34-9-32 982 000Fax: +34-9-34 311 800elion@elion.es

SWEDENGEMÜ Armatur ABPhone: +46-31-99 65 00Fax: +46-31-99 65 20order@gemu.se

SWITZERLANDGEMÜ GmbH Phone: +41-41-7 99 05 05Fax: +41-41-7 99 05 85info@gemue.ch

TAIWANGEMUE Taiwan Representative OfficePhone: +886-3-3 56 68 50Fax: +886-3-3 56 68 45gemu.twn@msa.hinet.net

THAILANDGEMÜ Valves PTE. LtdPhone: +65-65 62 76 40Fax: +65-65 62 76 49info@gemu.com.sg

TURKEYDurko Çevre Enerji Phone: +90 216 402 20 00Fax: +90 216 402 20 10info@durkocevre.com.tr

UAE + MIDDLE EASTGEMU Middle East FZCOPhone: +971-4-88 60 125Fax: +971-4-88 60 124info@gemue.ae

UKRAINECSC AutomationPhone: +380 (44) 494 33 55Fax: +380 (44) 494 33 66csc-a@csc-a.kiev.ua

UNITED STATESGEMÜ Valves Inc.Phone: +1-678-5 53 34 00Fax: +1-404-3 44 93 50info@gemu.com

GEMÜ manufacturing sitesand sales locations worldwide

GEMÜ manufacturing site

GEMÜ subsidiary

www.gemu-group.com

GEMÜ Gebr. Müller Apparatebau GmbH & Co. KGFritz-Müller-Straße 6-8 · D-74653 Ingelfi ngen-CriesbachPhone +49 (0)7940 123-0 · info@gemue.de

Subj

ect t

o al

tera

tion

· 09/

2016

· 88

4522

62