Car Multimedia System

OPERATION MANUAL

—Pure android 4.2

Dear customer，

Thanks for your purchase!

Please read this manual carefully，and keep it for future reference.

17

16

5

14

12

12

1

01

8

5

CONTENTS

Notes on installation……………………………………………………… ………1

Connection guide………………………………………………………………… ...2

Note of connect network…………………………………………………………… 3

Main menu…………………………………………………………………………… 4

Normal setting………………………………………………………………………...

Radio mode …………………………………………………………………..……..

DVD/SD/USB operation mode……………………………………… ……….........

IPOD mode……………………………………………………………………………

Bluetooth mode……………………………………………………………………….

TV mode……………………………………………………………………….… ……1

GPS mode….…………………………………………………………………………..

Brower….……………………………………………………………………………….1

Remote operation….…………………… ……………………………………………

Trouble shooting….…………………… ……………………………………………..

The negative battery terminal must be disconnected before making

connections,which can reduce damaging to the unit due to short circuit.

Be sure to connect the color coded leads correctly according to the

diagram.Incorrect connection may cause the unit malfunction or damage the

vehicle’s electrical

system.

Be sure to connect the speaker(-)leads

to the speaker(-)terminal.never

connect the left and right channel speaker cables each other or to the vehicle

body.Do not block vents or radiator panels.blocking them will cause heat to

build up inside any may result in fire.

After the completion of the

installation and begin to operate the unit(including

replacing the battery),please press the reset button(1) on the front panel with

pointed objects(such as ball pen) to set the unit to initial status.

Before installing the unit,make sure your vehicles is connected to 12v-14v dc

negative grounded electrical system.

NOTES ON INSTALLATION

1

CONNECTION GUIDE

2

3G/WIFI

DONGLE Support list

If there are several kinds of voice broadcast at the same time, suggest

to run a type of Apps.

Through a third party Apps can play 1080P video format RMVB/

AVI/

WAV/

TS/MOV/WMV/MKV/MPG etc.

Such as slow to response, crash, unable to boot, the system abnormalities,

please use the following methods:

1.Clean up the memory, close unnecessary programs running.

2.Unload the third-party Apps whose running is often wrong.

3.Use a pointed object to press the machine panel RES hole to restart the

system.

4.Use one-key reset to restore to factory settings(this process please do

not cut off the power supply, maybe need 3-4mins)

Note of connect network

3

Android 4.22...2

RAM: 1.6 G Bytes DDR3

CPU:Rockchip 3066 6 Cortex A9

Touch each

Pure Android System

Capacitive Screen

Multi-Touch Screen

OS:

NAND :4G Bytes

Inside HD DVR function

Outside OBD vehicle fault detection function.

Outside portable hard disk .

icons, can separately enter into the each model;

Special Features:

Main menu

4

If you want to read the file in gps card, you need press “file manager” icon then sd icon;

and when you connect usb with 3g/wifi usb connector ,you also need read press “file

manager” icon then usb icon;

The menu can sliding and change freely; our Capacitive Screen is primal and car

regulatory level; the interface reaction the fastest and the most sensitive, if you put 1-2

pieces A4 paper on the screen, through the paper, you can still sliding the interface

freely!

7

6

Internal storage;Total space;Nand flash;SD card and USB storage.

Storage5

Select delay time to capture the screen and set the location of the screenshot storage.

Screnshot Setting4

,Wireless display.Brightness

3

Key tone

2

1.Wifi

After connecting “Wifi model“，Open Wifi，connect“TP- LINK_CC0876”，In the

after of connecting “Wifi”，you can click “Browser” to browser internet

and download these softwares.

.Sound

Volumes，

.Display

Wallpaper，

.Apps

Downloaded，On SD Card，Running，All To uninstall these applications

System Setup

.

.

.Security

Screen lock，Owner info，Encrypt tablet，Make passwords visible，Device

administrators，Unknown sources

5

Amplifier2.

,Install web scripts.

Backup & reset9

8.Language &input

Click “Language &input” and choose the

language that your needs.

Spelling correction，Personal dictionary，

Default：select the different input ways of keyboard.

Back up my data，Factory data reset

10.Date &time

Automatic date & time，Automatic time Zone，

set data, set time, Select time zone,

Use 24-hour format，Select data format

11.Accessibility

Large text，Auto-rotate screen，Speak passwords，

Touch &hold delay

13.About tablet

System updates，Status，Legal information，

Model number，Android version，Baseband

version，Kernel version，Build number

.

1

which has five kinds of mode to adjust: Normal → Rock → Popular → Jazz → Classical ;

Press F/B, L/R as right picture which can come to the adjustment to car’s front, back, left, rightloudspeakers.

6

Steering wheel setting

Setup and use of steering wheel:

If your car with steering wheel control,

please operate as follows:

1. Under the circumstance of power cut off,

find the grounding wire of your car's

steering wheel wires(Note: some cars

have three pieces of wires, others have

two pieces), then connect it to the grounding wire of three pieces of steering wheel wires

drew forth from the main unit. If your car's steering wheel has three pieces of wires,

connect the other two pieces of key wires to the rest two pieces of key wires drew forth

from the main unit, you can connect them at will; if your car's steering wheel has two

pieces of wire totally, you can connect the rest one to any piece of the rest two pieces of

key wire drew forth from the main unit;

2. Supply the power to turn on the unit after you confirm the steering wheel connection

wires all correct;

3. Press the steering wheel icon, then steering wheel setup menu will bound out;

4. In steering wheel setup menu, press reset button firstly, you will clear the initial data

and records; means clear all keys. Note: you must press this key to clear all previous

setting before every to change setting.

5. And then, you can make the keys learn. after you press the top function key, next

press save, the icon will change, from grey to yellow; when you have pressed the key of

car's steering wheel, when you see the icon is yellow, that means the key has been got

sample by main unit, then, you can learn the next key till finish all keys learning.

6. When complete the learning, you need to press "save" to save the key you have

learned and start steering wheel function, if you didn't press "save" key after finished

learning, before you will study will make invalid processing.

7. If you don't want it after finish learning, press "reset" to cancel it, at the same time,

close the steering wheel function.

8. Maybe there are several keys in car's steering wheel, you can define by yourself,

make the key function of steering wheel and key function in menu correspondence, and

finish learning. You can ignore it if a key in menu but not in steering wheel, it won't

influence normal use. You just need to learn the keys which are in steering wheel's OK.

9.You can also enter setup menu and press "cancel" to close steering wheel function

after finish learning steering wheel. After closed the steering wheel will have no function.

If you need to turn on steering wheel function, please return to the first step and re-learn

to setup.

7

4

s: press 5,every time reduce 0.05;

5 /6/7/8

9.RDS

Return2.

Exit

8.

5.

4.LOC

3.ST

1.

Manual scan radio -

6.

Manual scan radio-

7.

Manual scan radio+

Manual Scan

Press button, choose different radio channels upward and downward. Long

press the unit will search the channels upward or downward automatically, It stops

when a channel is searched. The different i

Scan

Press 【Scan】button, it auto-scan radio which is per-set in 1-6 button of each

wave band, Every radio is displayed for 10 minutes.

Loc Press 【Loc】button to setup remote or short-range scan radio mode of unit, if be

setup in the short-range scan radio mode, the unit just receive local strong signal

radio. If be setup in remote mode, it will receive local and remote radios.

Radio mode

Manual scan radio+

8

1

switch the radio band. The switching order is as follows:

9you press 9, is invalid

3

Stereo and single track switch:

Press 【ST】button to setup stereo and single track receive radio mode.

RDS(optional function)

If no RDS, or RDS is closed, ;

If

with RDS,

press

,

then

you

can see another prompt dialog box;

as follows:

A.【PTY】

choose your favorite programs style, 2 seconds later it will auto-scan

program of the program style you setup.

B.【TA】it will to auto-search RDS display radio.

C.【AF】AF function is setup to be open while being again, Press it then to close

or re-open it,

If the current signal is weak, within 50 seconds the unit will auto-search

and display

strong signal radio of same style.

Band switch:

FM1→FM2→FM3→AM1→AM2

Favorite radio channels:

When the unit receive a favorite channel, You can press one of the buttons in 1-6

keys for 2 seconds to save it in this button. Press 1-6key to play the preset channel.

Return to main menu:

Press to return to the main menu

9

8

to stop playing, and press11 to play again. 12

11

Repeat/title

13. Fast forward

Previous

10. Fast backward

. Subtitle

. Previous page

. Next page

Return to Previous page

DVD/SD/MMC/USB OPERATIONSoperations

The unit will enter the DVD mode

automatically when you put in a

disc, if there is a disc inside the

device, you can also enter the

DVD mode by pressing DVD icon

in the menu status, Enter/eject disc

button.

1.

Menu display

2.

3

4

5

6.

7.

8.

9.

Audio

11.

12.

Direction key

14.

15

. Next

Play/ pause

Stop

Return to main menu

◆Play/pause

Press button to pause, press it again to recover normal play.

◆Stop:

Press button

◆Direction keys:

Press button to enter the next page; total is three pages;

10

Manual scanning

EQ

7

SYS8

9.

6.

54

8

9

99

49Press button

13

030Press 1

to switch the set of left track, right track, mixed track, stereo, 5

◆Menu play:

Press button [menu] to enter the menu mode. [Note: the disc should be the

VCD2.0, which supports the menu play or DVD].

◆Track function operation

Press

language (which should be supported by disc) freely.

◆ Fast forward / fast backward:

and 1 button long time to play fast forward and fast backward. Press 1

continuously to play fast forward [×2×4×8×20]. Press button directly in fast

forward or fast backward to return to the normal play.

◆Select program setup:

or 1 to choose next or previous.

◆Return to main menu:

Press button 1 to return to main menu.

TV MODE

1.

Automatic scan

2.

Previous Channel

3.

Next Channel

4.

5.

◆TV system setup

Press [TV setup] repeatedly to select the correct TV audio/video system. The

selection sequence is as follows:

PAL_L→PAL_DK→PAL-BG→PAL-M →PAL-N →SECAM_BG→NTSC_M

◆Preset the TV

Press [automatic scan] to scan and save the TV automatically. It can save up to

radio channels.

◆Channel selection:

Press and buttons to select the previous channel and next channel

.

.

Return to main menu

Return to Previous page

-

Manual scanning +

11

Switch to phone9.

Call records8.

7.

6.

5.

4.

2

1.

3

Press 4 to pause / play, press it again to recover normal play.

or 53

[repeat] to replay current program or cyclical replay all programs. 1

Press 6

Repeat/title

EQ

Previous

. Play/pause

.

IPOD OPERATING MODE

1.

Menu display

2.

3

4

5

6.

7.

8.

. Next

Return to main menu

◆Menu play

[menu] to enter menu play mode.

◆Repeat

Press

◆Program selection setup:

Press to select next or previous respectively.

◆In play status:

Return to Previous page

Please note the several following points before reading the Bluetooth operating instructions:◆To connect the mobile phone Bluetooth, enter “Bluetooth” panel and press button to match.◆After the successful match, the Bluetooth picture will turn to “Bluetooth icon”.◆Default matching password is 0000.

. Phone dial number

Phone book

Dial/receive calls

Refuse /hang off calls

Number display

BLUETOOTH MODE

.

Return to main menu

Return to Previous page

12

Auto connectChoose

data of Bluetooth.

DeviceName

or remove the phone contacts from the dvd;

Phone Book

Bluetooth setup

◆Press [ ] to see the save

and change

[ ] to connect

Bluetooth.

Input your phone contacts to the DVD,

Bluetooth Music

◆The Bluetooth of this DVD supports

A2DP, stereo Bluetooth music play

protocol and automatic control. If the

matched mobile phone supports the

functions, you just need to press [Play]

in the standby mode under the A2DP

communication protocol, then, the

device will control the mobile phone automatically to play its music. You can press

[Play] to pause when play the music. The device returns to normal when you press

it again. Press [Stop] to stop playing and [play] to start to play again. Press

[Previous] to select the next program and [Next] to select the previous program.

13

When you install finished m

or "sygic"

When you need use the navigation ,you must click “SD” at first，click

“primo_800*480” “IGO” and install the ”APK” file.

ap, you can open the map，GPS navigation .

GPS navigation

14

after you connecting “hard driver”, “SD ”,“USB”，“photos”, “movie” and

“Tool” ,connect ,then Click“ File Manager” ,you will read the content .

Browser

Click “Browser” Open“ Google” inter page，You can enter into different

websites ，then web searching，read news，know the newest current events，

stock inquiries。

15

1. Power supply

2. Play/Pause

3. Enter/Eject

4. Direction keys

5. Band/System switching button

6. Enter

7. Volume +/-

8. Select the channel/program/Fast

backward/forward

9. Programming/Stereo

10. Playing time display

11. GPS screen switching

12. Repeat/Automatically save the channel

13. Random play/Local & remote control

14. Number keys

15. Audio settings

16. PBC settings

17. Mute

18. Desired program

19. Mode switching

20. Stop/Return

21. Angle selection

22. Title/Language settings

23. Main menu setup

24. Title/Catalog settings

25. Zoom in/Zoom out

26. GPS shortcut/mode

27. TFT screen up-sliding key

28. TFT screen down-sliding key

29. Compensation of equal-loudness

REMOTE OPERATION

16

Trouble shooting

17

What’s in the box

1 x DVD Host

1 x Power Cable

2 x A/V Cable

1 x Cam in Cable

1 x Remote Controller

1 x GPS Antenna

1 x Ipod Cable

1 x 3G/WIFI USB Cable

1 x User’s Manual

1 x Fitting Kits(Optional)

1 x USB Cable(Optional)

1 x Radio Tieline(Optional)

1 x TV Tieline(Optional)

1 x Can bus box(Optional)