MANDATORY DISCLOSURE BY INSTITUTIONS · Web viewMandatory Disclosure by Institutions running AICTE approved Engineering/Technology/Pharmacy programmes to be included in their respective

MANDATORY DISCLOSURE BY INSTITUTIONS RUNNING AICTE APPROVED ENGINEERING/TECHNOLOGY/PHARMACY PROGRAMMES TO BE INCLUDED IN THEIR RESPECTIVE INFORMATION BROCHURE, DISPLAYED ON THEIR WEBSITE AND TO BE SUBMITTED TO AICTE EVERY YEAR LATEST BY 30TH APRIL TOGETHER WITH ITS URL

The following information is to be given in the Information Brochure besides being hosted on the Institution’s official Website.

“The information has been provided by the concerned institution and the onus of authenticity lies with the institution and not on AICTE.”

I Name of the Institution : Institute of Road and Transport Technology.

Sri Vasavi College Post, Erode- 638 316 Erode District, Tamil Nadu

Telephone No. : 0424 – 2533279, 2533579Fax : 0424 – 2533590E-mail : [email protected] : irttech.ac.in

II NAME & ADDRESS OF THE DIRECTOR : Thiru.R.Sivaramakrishnan,B.E,

DIRECTOR , Institute of Road Transport, Taramani, Chennai – 600 113

Telephone No. : 044- 22541730 Fax No. : 044- 22541761 E-mail : [email protected]

[email protected]

III. Name of the Affiliating University: ANNA UNIVERSITY, COIMBATORE – 641 013

IV. GOVERNANCE Members of the Board and their brief background

1. Thiru Debendranath Sarangi.I.A.S., Chairman Secretary to Government of Tamil Nadu. Transport Department Chennai – 600 009.

2. Thiru V.K.Jayakodi I.A.S., Principal Secretary Commissioner of Technical education Member Guindy,Chennai-600 025.

3. Thiru A. Mohammed Aslam, I.A.S, MemberAdditional Secretary to Government,Transport Department,

mailto:[email protected]

mailto:[email protected]

Chennai-600 009.

4. Thiru A. Devaraj, M.Sc.,AICWA,ACS MemberAdditional Director,Finance Department,Secretariate,Chennai – 600 009.

5. Dr.T.P.Kalaniti,M.D., MemberDirector of Medical Education i/c,Kilpauk, Chennai – 600 010.

6. Thiru M.Ramasubramanian,B.E.M.B.A., MemberManaging DirectorMetropolitan Transport Corporation Ltd.,Pallavan House,Chennai – 600 002.

7. Thiru R.Jeyaraman, MemberManaging DirectorState Express Transport Corpn. Ltd.Thiruvalluvar IllamChennai – 600 002.

8. Thiru R.M.Cheralathan, MemberManaging Director,Tamilnadu State Transport Corpn. Ltd.,12, Ramakrishna Road,Salem – 636 007.

9. Thiru P.Hariraj,M.E., MemberDirector,Highways Research Station,Agro House Thiru-vi-ka Estate,Guindy, Chennai – 600 032.

10. Thiru K.Anbarasu,B.E., MemberDeputy Director General,Bureau of India Standards,CIT Campus, Taramani,Chennai – 600 113.

11. Dr.P. Narayanasamy, Ph.D., MemberProfessor & Head,CSE Department,College of Engineering,Anna university, Guindy,Chennai – 600 025.

12. Thiru R Balasubramaniam ,B.E.M.B.A.,M.C.A., MemberDirector,Central Institute of Road Transport,Bhosari,Pune – 411 026.

13. Thiru. M.K.Subramanian, M.A., Member

Secretary, Automobile Association of Southern India, No. 187, Anna Salai, Chennai – 600 006.

14. Thiru.R.Sivaramakrishnan,B.E, Member Director, Institute of Road Transport,

Taramani,Chennai-600 113.

(a) Number of meetings held during last three years: 2005–06 - 5 , 2006-07- 3 and 2007-08 – 5

Members of Academic Advisory Body Sl.No.

Name Category Position (Chairman/member

1 Dr. B. Viswanathan Principal Chairman2 L.Peter Stanley Bebington Head & Professor Member3 Dr. R.Subramaniam Head & Asst. Professor Member4 Dr. M.R. Mohan Professor, Anna

University ChennaiMember

5 Mr.M.S.RamPrasad Deputy DirectorEducation, IRT, Taramani, Chennai.

Member

6 Mr.V.Swaminathan Deputy DirectorAccounts, IRT, Taramani, Chennai

Member

6 Mr.Pankaj.J.Shah DirectorSRP Envirosystems Pvt. Ltd, Bangalore

Member

Frequency of the Board Meetings and Academic Advisory Body

Once in three months

Organizational chart and processes

Nature and Extent of involvement of faculty and students in academic affairs/ improvements

CLASS COMMITTEE

A class committee consists of teachers of the concerned class, student representatives and a chairperson who is not teaching the class. It is like the 'Quality Circle' (more commonly used in industries) with the overall goal of improving the teaching-learning process. The functions of the class committee include

Chairman(Secretary to Government of

Tamil Nadu, Transport Department)

DirectorInstitute of Road and Transport

Chennai – 600 113

PrincipalInstitute of Road and Transport

Technology, Erode- 638 316

Heads of the Departments

Non -Teaching staffTeaching faculty

Governing council members

Class CommitteeMinisterial staff Technical staff

Students

Solving problems experienced by students in the class room and in the laboratories Clarifying the regulations of the degree programme and the details of rules therein

Informing the student representatives the academic schedule including the dates of assessments and the syllabus coverage for each assessmentInforming the student representatives the details of Regulations regarding weightage used for each assessment. In the case of practical courses (laboratory/ drawing/ project work/ seminar etc. ) the breakup of marks for each experiment/ exercise/ module of work, is clearly discussed in the class committee meeting and informed to the students.

Analyzing the performance of the students of the class after each test and finding the ways and means of solving problems, if any

Identifying the weak students, if any, and requesting the teachers concerned to provide some additional help or guidance or coaching to such weak students.

The class committee for a class under a particular branch is normally constituted by the head of the department. However, if the students of different branches are mixed in each class of the first semester (generally common to all branches), the class committee is to be constituted by the Head of the Institution.

The class committee will be constituted on the first working day of any semester.

At least 4 student representatives (usually 2 boys and 2 girls) will be included in the class committee.

The chairperson of the class committee may invite the Faculty adviser(s) and the Head of the department to the meeting of the class committee.

The Head of the institution may participate in any class committee of the institution.

The chairperson is required to prepare the minutes of every meeting, submit the same to the head of the institution within two days of the meeting and arrange to circulate among the concerned students and teachers. If there are some points in the minutes requiring action by the management, the same shall be brought to the notice of the management by the head of the institution.

The first meeting of the class committee shall be held within one week from the date of commencement of the semester, in order to inform the students about the nature and weightage of assessments within the framework of the Regulations. Two or three subsequent meetings is also held at suitable intervals. During these meetings the student members representing the entire class, shall meaningfully interact and express the opinions and suggestions of the class students to improve the effectiveness of the teaching-learning process.

Mechanism/Norms & Procedure for democratic/good Governance

The following committees have been formed and norms and procedures for democratic/good governance laid down. 1. Head of the Departments are requested to conduct meetings every month along with their staff members and matters related to academic affairs are discussed in the staff meeting.

2. Head of the Departments at the time of the Meeting with the Principal discuss the points raised at the staff meeting and procedures are laid down for improving the Performance of the students and also for smooth functioning of the Institute.

3. Regular meetings are held by the Principal with the class representative to discuss regarding the hardship if any, faced by the students in their Academic schedule, and steps are formulated to clear the barriers to make them perform well in their studies.

4. Principal convenes Hostel and mess representative meetings to elicit the views of the students for the smooth functioning of the Hostel and Mess.

5. In addition there are other Technical and Non-Technical Association, Clubs and forums for students to air their views.

Student Feedback on Institutional Governance/faculty performanceAvailable. Model Students Feedback form given in annexure - 1

Grievance redressal mechanism for faculty, staff and students

There is a complaints cum Redressal committee formed with the following members. They receive complaints from staff and students and redress their grievances.

S.No.

Name Category

Designation Address

1 Dr.R.Anita Member Asst. Professor Dept. of EEE, IRTT, Erode .

2 Mrs.P.Bhuvaneswari

Member Lecturer Dept. of IT, IRTT, Erode .

3 Mrs.M.Annapoorani

Member Lecturer Dept. of CSE, IRTT, Erode .

4 Mrs.Praba Ramadas

Member Accounts Officer

Accounts Officer, IRTT, Erode.

5 Mr.L.Peter Stanley Bebington

Member Professor & Head

Dept. of ECE, IRTT, Erode .

6 Dr.R.Subramaniam

Member Asst. Professor Dept.of Automobile, IRTT, Erode .

7 Mr.N.Kumaraswamy Third Advocate District Court,

Party Member

Erode.

V. PROGRAMMES

Name of the Programmes approved by the AICTE

Sl.No Approved Programmes AICTE approval

Letter No.1 B.E. Automobile Engineering

730-52-224(E)/ET/97

Dated 2nd May,2008

2 B.E. Civil Engineering3 B.E. Computer Science & Engineering4 B.E. Electronics & Communication

Engineering5 B.E. Electrical & Electronics Engineering 6 B.E. Mechanical Engineering7 B.Tech . Information Technology8 M.E. Structural Engineering

Name of the Programmes accredited by the AICTE :

Sl.No Approved Programmes NBA approval Letter

No.Period of Validity

1 B.E. Automobile Engineering

F.No.NBA/ACCR-467/2004 dt. July 27, 2006.

3 years w.e.f.27.07.06

2 B.E. Civil Engineering3 B.E. Mechanical

Engineering

For each Programme the following details are to be given:

Sl.No.

Name of the Programme Numberof seats

Duration Fee

1 B.E. Automobile Engineering 30 4 years 32500/=2 B.E. Civil Engineering 30 4 years 32500/=3 B.E. Computer Science & Engineering 60 4 years 32500/=4 B.E. Electronics & Communication

Engineering60 4 years 32500/=

5 B.E. Electrical & Electronic Engineering 60 4 years 32500/=6 B.E. Mechanical Engineering 60 4 years 32500/=7 B.Tech . Information Technology 60 4 years 32500/=8 M.E. Structural Engineering 18 2 years 38000/=

Cut off mark/rank for admission during the last three years

Branch Year Cut off MarksOC BC MBC SC/ST

Auto2005-06 252.36 245.59 237.10 209.772006-07 159.00 224.53 212.21 189.212007-08 188.25 162.25 173.00 146.00

Civil2005-06 246.78 239.76 225.47 214.852006-07 231.43 222.83 208.99 177.942007-08 180.25 175.50 169.75 156.75

CSE2005-06 263.85 262.89 250.78 229.252006-07 167.25 253.58 234.99 208.632007-08 190.75 185.50 185.50 149.00

ECE2005-06 267.72 264.02 253.47 230.922006-07 259.12 255.87 163.67 211.722007-08 194.50 190.75 187.50 173.50

EEE2005-06 260.53 258.89 247.29 175.502006-07 247.34 243.64 224.8 199.62007-08 186.75 185.00 179.00 160.25

MECH2005-06 262.42 251.83 242.55 210.462006-07 238.93 235.47 213.92 189.632007-08 191.80 182.50 173.75 156.25

IT2005-06 262.01 260.02 247.87 222.752006-07 250.48 248.68 229.25 186.822007-08 189.00 187.75 183.50 144.00

ME.- StructuralEngineering

2005-06 47.118 22.811 26.821 21.3792006-07 37.468 35.724 18.058 13.6712007-08 31.554 24.619 26.463 26.888

Placement Facilities

A Placement and training cell with Principal as patron , Professor L.Peter Stanley Bebington as Placement and Training Officer, Mr.S.Tharves

Mohideen as Additional Placement Officer, Placement secretary and student representatives from each department, is functioning in the Institute to look after the placement activities .

312 of the 2008 passed students were placed in reputed companies and 150 of the 2009 passing out students are placed and the placement process is still on.

An Advisory Committee has also been formed for Training and Placement Cell with the Principal as the Chairman and the Training and Placement Officer as the Convener. The meetings are held at the end of each semester to take stock of the achievements and constraints of the training and placement activities.

An MOU has been signed by the institute with Infosys , Bangalore and our Institution is associated with Infosys Development Centre (DC) at Mysore. A senior infosion, DC SPOC (Single Point Of Contact) is identified to collaborate with our institution to take the initiative forward. The DC SPOC is Mr.Umesha Sridhara Murthy. IRTT SPOC is Mr.L.Peter Stanley Bebington, Professor & Head, Dept.of ECE. Campus connect core team1. Mrs.P.Kalyani, Sel.gr. Lecturer and Head, Department of MCA2. Mr.R.SivaSubramanian, Senior Lecturer, Department of CSE3. Mr.K.S.Thirunavukkarasu, Head, Master of Computer Applications.4. Dr.R.Anita, Head, Electrical & Electronics Engg.5. Dr.A.Saradha, Head, Computer Science & Engg.As part of the campus connect program, Infosys has organized a full time residential program at Infosys campus, Mysore for two weeks from 1st May 2006. Our Institute deputed the following staff members to undergo the training program.

1. Mr.Thirugnanasambantham, Lecturer, MCA.2. Mr.Mohanasundaram, Lecturer, I.T.

The FEP covered the following technical course titles.1. Computer Hardware and system software concepts.2. Programming fundamentals3. Object oriented concepts4. RDBMS5. Analysis of algorithms6. System design Methodologies7. Web Architecture8. Client server concept9. User interface design

The nominated faculty members who had training at Infosys will drive the FP roll out at our College campus and provide Intensive training for our selected group of students.

The following staff members have undergone the soft skill training program conducted by Infosys at Mysore.

1. Mr.S.Tharves Mohideen, SGLecturer, Department of Mechanical Engineering

2. Dr.K.Balamurugan, SGLecturer, Department of Mechanical Engineering

3. Mrs.P.Anurekha, Lecturer, Department of IT

4. Mrs.R.Kalaivani, Lecturer, Department of MCA.

The following staff members have undergone the training program on software testing conducted by Infosys at Mysore.

1. Mr.S.Palanisamy, Lecturer, Department of CSE2. Mr.M.Marikannan, Lecturer, Department of CSE.Mr.Shekar, Anchor & SPOC, E & R Department, Infosys, Mysore,

Mr.PremKumar, Admin Support, E & R Department, Infosys, Mysore and Mr.Narayana Rao, Team Lead, Infosys Technologies, Mysore conducted a road show on the Forenoon of 14-2-08, to apprise the students about the campus connect program conducted by them in our campus.Ms.Selvi, SGLecturer, Department of Mechanical Engineering and two

students from the department of ECE and EEE attended the “SPARK 2008 ” organized by Infosys on March 7th and 8th 2008.

Mr.M.Raja, SG Lecturer, Department of ECE attended the course on Computer Networks as part of the Indo-US Engineering Faculty Leadership institute at the Global Education Center of Infosys Technologies from June 9 to June13,2008.

MOU has also been signed with the following industries1. TAFE,Chennai.2. Sathyam Computers, Chennai.3. FLSmidth, Chennai.4. Sutherland Global Services.

Students visit the above industries for implant training and also do projects for these industries. Guest lectures by experts from the above industries are arranged for the students.

An MoU has been signed with IBM, Bangalore. Dr.A.Saradha and Mr.K.S.Thirunavukarasu have been deputed to undergo the Trainers Training Program at IBM Bangalore for a period of four days. IBM Bangalore have also given one web server and number of software CDs for training the students in the campus.

An Entrepreneurship Awareness camp was conducted for the students from 6-8-08 to 8-8-08 to enlighten the students about self employment.

The institute is the SAE Career Start Written Test Centre of western Tamilnadu.

The placement cell maintains a rich alumni data base through which the students keep themselves updated of the happenings in the corporate area. Various reputed concerns visit our campus frequently to recruit our high caliber engineers. We get regular placement services from companies ON/OFF campus.

Campus placement in the last three years with minimum salary, maximum salary and average salary

Department/Programme Number of

students recruited

Average Salary/annum

in Rs.

Highest salary offered/annum

in Rs.

2005-2006

1.Automobile Engineering2.Computer Science & Engg.3.Electronics & Communication Engg.4.Electrical & Electronics Engg.5.Information Technology6.Mechanical Engineering7.Civil Engineering8.M.E. (Thermal Engineering)

9303024162571

Rs.1,20,000/= Rs.3,00,000/=

2006-2007

1.Automobile Engineering2.Computer Science & Engg.3.Electronics & Communication Engg.4.Electrical & Electronics Engg.5.Information Technology6.Mechanical Engineering7.Civil Engineering8.M.E. (Thermal Engineering

173842331939211

Rs.1,20,000/= Rs.3,00,000/=

2007-2008

1.Automobile Engineering2.Computer Science & Engg.3.Electronics & Communication Engg.4.Electrical & Electronics Engg.5.Information Technology6.Mechanical Engineering7.Civil Engineering

1141473837

28 5

Rs.1,92,000/= Rs.3,60,000/=

Name and duration of programme(s) having affiliation/collaboration with Foreign University(s)/Institution(s) and being run in the same Campus along with status of their AICTE approval. If there is foreign collaboration, give the following details: No such programme is being run in the campus.

Details of the Foreign Institution/University : Not Applicable Name of the University/Institution Address Website Is the Institution/University Accredited in its Home Country Ranking of the Institution/University in the Home Country Whether the degree offered is equivalent to an Indian

Degree? If yes, the name of the agency which has approved equivalence. If no, implications for students in terms of pursuit of higher studies in India and abroad and job both within and outside the country.

Nature of Collaboration Conditions of Collaboration Complete details of payment a student has to make to get the

full benefit of collaboration. For each Collaborative/affiliated Programme give the

following: Not Applicable

Programme Focus Number of seats Admission Procedure Fee Placement Facility Placement Records for last three years with minimum salary,

maximum salary and average salary Whether the Collaborative Programme is approved by AICTE? If not

whether the Domestic/Foreign Institution has applied to AICTE for approval as required under notification no. 37-3/Legal/2005 dated 16th May, 2005

No such programme is being run in the campus.

VI. Faculty Branch wise list of faculty members:

S.No

Branch Permanent Faculty

Visiting Faculty

Adjunct Faculty

Guest Faculty

Permanent Faculty: Student Ratio

1 B.E. Automobile Engineering 7 -- -- -- 1:12.85

2 B.E. Civil Engineering 6 -- -- 1:153 B.E. Computer Science &

Engineering11 -- -- -- 1:16.3

64 B.E. Electronics & Communication

Engineering12 -- -- -- 1:15

5 B.E. Electrical & Electronic Engineering

12 -- -- -- 1:156 B.E. Mechanical Engineering 9 -- 4 -- 1:13.87 B.Tech . Information Technology 12 -- -- -- 1:158 M.E. Structural Engineering 2 -- -- -- 1:9

Number of faculty employed and left during the last three yearsYear Employed Left

2005-2006 17 32006-2007 15 7+2*

2007-2008 - -

* Two faculty members retired from serviceVII. PROFILE OF PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND

DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED

Head of the Institution

STAFF PROFILE

1.Name : Dr. B.VISWANATHAN

2. Date of Birth : 03.10.1949

3. Age : 58

4. Educational : B.E., M.Sc. (Engg), Ph.D

Qualification

5. Work Experience

- Teaching : 31.5 yrs

- Research : 5 years

- Industry : 1 year

- Others : Nil

6. Area of Specializations : B.E., - Electrical

M.Sc.(Eng) – Power Systems

Ph.D - Electrical

7. Subjects teaching at

Under Graduate Level : U.G & P.G Level

Post Graduate Level

8. Research guidance

No. of papers published in

Masters’s - National Journals : 03

Ph.D. - International Journals : 09

- Conferences :

9. Projects Carried out : Transformer Life expectancy evaluation by simulation

studies for Madhya Pradesh State Electricity Board.

10. Patents : Nil

11. Technology Transfer : Nil

12. Research Publications : 12

13. No. of Books Published with details : Nil

Details regarding faculty attached in the ANNEXURE – II

VIII. FEE

Details of fee, as approved by State fee Committee, for the Institution

Rs. 32,500/= ( Per annum) for Government Quota

Rs. 62,500/= ( Per annum) for Management Quota

Time schedule for payment of fee for the entire programme. In two installments at the beginning of odd and even semesters

No. of Fee waivers granted with amount and name of students.

Fee not waived for any student

Number of scholarship offered by the institute, duration and amount

1. Government of Tamil Nadu Scholarship (BC and MBCscholarship)

2. Government of India Scholarship to SC/ST students

3. Adi - Dravidar and Tribal Welfare Loan Scholarship( for hostlers only)

4. Farmers Social Security scheme scholarship

5. Minority Community Scholarship ( minority community students)

6. Labour welfare Scholarship ( Students admitted under reserved quota)

7. Financial aid is given by various trust for economically poor students.

Criteria for fee waivers/scholarship.

1. Parent income should not exceed Rs.1,00,000/=2. The scheme is applicable to the students admitted under Government Quota only.3. Either of the parents or any of the brothers/sisters should not be a graduate.4. They should have secured not less than 40% in aggregate in the final Examination.

Estimated cost of Boarding and Lodging in Hostels.

Lodging Rs. 6200/= Per annumBoarding Rs. 10,000/= Per annum (approximately)

IX. ADMISSION

Number of students admitted under various categories each year in the last three years.

UG(FT) Course Number of seats sanctioned with the year of approval(2008-09)

Number of students admitted under various categories each year in the last three years.

2008-2009As on 25-8-08

2007-2008

2006-2007

UG(FT)

AUTO 30 26 28 28CIVIL 30 27 28 30CSE 60 58 60 60

MECH 60 56 60 59ECE 60 57 60 60EEE 60 59 60 59IT 60 56 60 59

PG(FT)M.E.

Structural Engineering

18 14 9 9

Number of applications received during last two years for admission under Management Quota and number admitted.

Year Applications received

Students admitted

2006-2007 1358 1402007-2008 1927 131

X. ADMISSION PROCEDURE Mention the admission test being followed, name and address

of the Test Agency and its URL (website).No admission test

Number of seats allotted to different Test Qualified candidates separately [AIEEE/CET (State conducted test/University tests)/Association conducted test]Not applicable

Calendar for admission against management/vacant seats:

- Last date for request for applications. 14.05.2008- Last date for submission of application. 05.06.2008- Dates for announcing final results. 28.07.2008 - Release of admission list (main list and waiting list should be

announced on the same day) 28.07.2008- Date for acceptance by the candidate (time given should in no

case be less than 15 days) 08.08.2008- Last date for closing of admission. 31.08.2008- Starting of the Academic session. 11.08.2008- The waiting list should be activated only on the expiry of date of

main list. - The policy of refund of the fee, in case of withdrawal, should be

clearly notified. Refund of tuition fee alone will be done as per letter No. 11131/J3/98 dated 17.06.2000 of the Director of Technical Education, Chennai.

XI. CRITERIA AND WEIGHTAGES FOR ADMISSION

Describe each criteria with its respective weightages i.e. Admission Test, marks in qualifying examination etc. Qualifying Examination – A mere pass in HSC or its equivalent with the minimum average percentage in the relevant subjects or A pass in any one of the HSC (Vocational Stream) prescribed for B.E Degree admissions or any other equivalent qualification approved by the State Board of Technical Education and Training / Higher Secondary Board of Tamilnadu / Anna University for Engineering Admissions. Qualifying Examinations Marks (Maths – 100 marks, Physics + Chemistry- 100 marks) Total –200 marks Cut off marks = 200 marks

Mention the minimum level of acceptance, if any.

For SC/ST Candidates, a mere pass in the qualifying examination. The minimum marks are same as the passing minimum for HSC of State of Tamilnadu.

Candidates belonging to communities other than SC/ST should have obtained the following minimum average percentage.

A. Candidates of HSC(Academic)and other equivalent examination

i) For communities other than BC /BC(Christian)/BC(Muslim)/MBC&DNC /SC/ST - Other communities. A minimum of 55% in Mathematics, Physics and Chemistry.

ii) For BC /BC(Christian)/ BC(Muslim) communities. A minimum of 50% in Mathematics, Physics and Chemistry.

iii) For MBC&DNC communities. A minimum of 45% in Mathematics, Physics and Chemistry.

B. Candidates of HSC(Vocational)and other equivalent examination

i) For communities other than BC /BC(Christian)/BC(Muslim)/MBC&DNC /SC/ST - Other communities. A minimum of 55% in Mathematics, Physics and Chemistry.ii) For BC /BC(Christian)/ BC(Muslim) communities. A minimum of 50% in Mathematics, Physics and Chemistry.iii) For MBC&DNC communities. A minimum of 45% in Mathematics, Physics and Chemistry.

Mention the cut-off levels of percentage & percentile scores of the candidates in the admission test for the last three years.

Branch Year Open Quota MQOC BC MBC SC/ST

Auto

2005-06 252.36

245.59 237.10 209.77 217.37

2006-07 159.00 224.53 212.21 189.212007-08 188.2

5162.25 173.00 146.00

Civil

2005-06 246.78

239.76 225.47 214.85 214.66

2006-07 231.43 222.83 208.99 177.942007-08 180.2

5175.50 169.75 156.75

CSE

2005-06 263.85

262.89 250.78 229.25 238.52

2006-07 167.25 253.58 234.99 208.632007-08 190.7

5185.50 185.50 149.00

ECE

2005-06 267.72

264.02 253.47 230.92 253.27

2006-07 259.12 255.87 163.67 211.722007-08 194.5

0190.75 187.50 173.50

EEE

2005-06 260.53

258.89 247.29 175.50 231.96

2006-07 247.34 243.64 224.8 199.62007-08 186.7

5185.00 179.00 160.25

MECH

2005-06 262.42

251.83 242.55 210.46 233.05

2006-07 238.93 235.47 213.92 189.632007-08 191.8

0182.50 173.75 156.25

IT

2005-06 262.01

260.02 247.87 222.75 192.25

2006-07 250.48 248.68 229.25 186.822007-08 189.0

0187.75 183.50 144.00

ME.- StructuralEngg.

2005-06 47.118

22.811 26.821 21.379 18.776

2006-0737.468 33.009 18.058 13.671

31.430

2007-08 31.554 24.619 26.463 26.888

** M.E., Structural Engineering students were admitted in 2005-06 and 2006-07 as per TANCET marks for 100.

Branch Year Management QuotaOC BC MBC SC/ST

Auto 2006-07 154.21 117.00 150.46 -2007-08 - 144.25 105.75 134.50

Civil 2006-07 202.68 149.29 151.13 176.562007-08 177.00 147.50 120.75 137.75

CSE 2006-07 184.92 240.02 229.73 171.762007-08 185.25 183.75 176.75 161.75

ECE 2006-07 249.25 246.81 232.37 189.882007-08 192.25 182.00 179.00 155.75

EEE 2006-07 227.01 209.90 209.39 164.422007-08 182.00 161.00 169.25 148.00

MECH 2006-07 226.17 209.58 169.01 157.892007-08 184.17 156.50 124.75 133.50

IT 2006-07 238.21 236.34 218.34 181.492007-08 184.00 179.75 172.75 137.50

M.E. (Structural Engineerin

g)

2007-08 - 17.822 12.497 -

Display marks scored in Test etc. and in aggregate for all candidates who were admitted

Annexure-III – Open Quota Annexure-III – Management Quota

Item No I - XI must be given in information brochure and must be hosted as fixed content in the website of the Institution.

http://www.irttech.ac.in/MD/MQ-ADMIT.doc

http://www.irttech.ac.in/MD/GQ-ADMIT.doc

The Website must be dynamically updated with regard to XII–XV.

I. APPLICATION FORM Separate application form for Management quota seats available on request. Application form can not be downloaded or submitted online. Open quota seats are filled by single window system of the Anna University.

II. LIST OF APPLICANTS

List of candidates whose applications have been received along with percentile/percentage score for each of the qualifying examination in separate categories for open seats. List of candidates who have applied along with percentage and percentile score for Management quota seats

Annexure - IV

III. RESULTS OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS

Composition of selection team for admission under Management Quota with the brief profiles of members The Director , (Administration), Institute of Road Transport, Taramani, Chennai – 600 113 The Additional Director, Institute of Road Transport, Taramani, Chennai-600 113The Deputy Director, (Education) Institute of Road Transport, Taramani, Chennai-600 113 The Assistant Director, Institute of Road Transport, Taramani, Chennai-600 113

Score of the individual candidates admitted arranged in order of merit Annexure - V – Open Quota

Annexure - V – Management Quota List of candidates who have been offered admission Annexure-III – Open Quota

Annexure-III – Management Quota Waiting list of the candidates in order of merit to be operative from the

last date of joining of the first list candidates.

The candidates are arranged in the order of Merit and they are called for counseling as per 1:4 ratio. The students who attend the counseling are allotted seats in the order of merit and based on communal rotation and the entire seats in the Management Quota are allotted from the first list itself waiting list will not arise.

List of the candidates who joined within the date, vacancy position in each category before operation of waiting list.

The students who are allotted seats in Management quota have joined within the due date and vacancy does not exist.

IV. Information on infrastructure and other resources available LIBRARY :

Number of Library books/Titles/Journals available (programme-wise)

Sl.No

Name of the Programme No. of Titles

No. of Volumes

National Journal

International Journal

UG





http://www.irttech.ac.in/MD/MQ-OVER.doc

1 Automobile Engineering 1182 2036 8 ASME2 Civil engineering 1930 2931 8 ASCE3 Computer Science & Engg 3954 5267 6 IEL4 Electronics &

Communication Engineering

1753 3830 8 IEL Online

5 Electrical & Electronics Engineering

2261 3212 6 IEL

6 Mechanical Engineering 2696 4291 7 ASME7 Information Technology 957 1525 7 IEL

PG1 M.E., Structural

Engineering347 741 -- ASCE

2 Science & Humanities 2576 3811 7 -

List of online National/International Journals subscribed. We have also subscribed to e. journals through INDEST- AICET consortium. E-Library facilities : More then 1000 CDs available

LABORATORY: For each Laboratory

List of Major Equipment/Facilities

S.NoName of the

Course Name of the laboratory/

WorkshopMajor equipment

1 Department of Automobile Engineering

Engines Testing Lab Universal Engine Test BedHydraulic Dynamometer (300 HD)Eddy Current Dynamometer(20Kw)Eddy Current Dynamometer (40 Kw)Gas Analyzer- NURIBASmoke MeterDigital Storage OscilloscopeCFD Software- STAR CDCDM Unit- AVLDAQ Software- Five Gas AnalyzerVI Software – NIPressure pickup

Automotive Pollution and Electronics Lab

Automotive Chassis ComponentsUniversal Test StandAir Brake SystemShock Absorber Test RigWheel Aligner, Engine Analyser

2

CAD Lab

Pentium IV – 15 Nos.Printer – 2 Nos.Software – STAR CD VI Lab view

S.NName of

theCourse

Name of the laboratory/workshop

Major equipment

2 Department of Information Technology1 Hardware Lab Function Generator (1 MHz)

CRO –30 MHz, DC Regulated Power supply8085 Microprocessor Trainer

8051 Microcontroller Trainer kit12V DC Motor with slotted disk8086 4.77 MHz Microprocessor Kit8251 & 8253 Interface boardKeyboard and Display BoardStepper motor controller with stepper motor8259 Interface Board, FDC Interface BoardHexa decimal Keyboard, 4 digit display cardTraffic light control systemDigital Ammeters & VoltmetersDigital IC Trainer kitTMS 320C50 DSP Trainer kitBPSK Modulation and Demodulation TrainerAM Modulation and Demodulation Kit (VCT 03)FM Modulation and Demodulation Kit(VCT –011)PAM, PPM, PWM Modulation and Demodulation kit (CT –01) Universal VLSI Main board, Piggyback Board.

2 Software Lab Pentium D(Dual core) – 30 NosPentium IV – 30 Nos.Rational Enterprise suite – 10 user MS office 2000 Professional,Visual Studio 6.0 Enterprise,Unix & C for 8386, TurboProlog 2.0, # Turbo PrologTool Box, Turbo Pascal EditorTool Box, Turbo PascalGraphics Tool Box, TurboPascal 5.0, Turbo PascalDatabase Tool Box, Software BHARATHI, WORDLORD,ANSYS 5.7, CATIA,AUTOCAD 2000, STAAD-ProOrcad with Pspice AD

S.N Name of theCourse


Major equipment

3 Dept.of Electronics & Communication

Engineering Digital & Electronics Lab

20 MHz dual trace oscolloscope30 MHz dual traceOscilloscopes3 MHz Function generatorDigital Trainer systemsVLSI Trainer systems

1

2 Communication Lab

5 meter and 3 meter dish antenna with accessoriesCISCO Router and cableRAD ModemDigital Modulation Trainer systemsAdvanced analog communication training systemAntenna Trainer system

3 Microprocessor Lab

100 MHz dual trace oscilloscopeMicroprocessor Trainers & interface boardsDSP Trainer systems

4 Microwave Lab Microwave test benches

Fiber optic Trainer Systems5 Computer Lab Pentium D(Dual core) –10

Pentium IV – 5.Server 1


Name of the laboratory/workshop Major equipment

4 Dept.of Civil Engineering

1

Highway Materials Lab Los Angle’s Abrasion testing machineMarshall stability apparatusDuctility Testing Machine

2Soil Engg.Lab Triaxial shear test apparatus

Permeability apparatusConsolidation apparatus

3

Hydraulic Engg.Lab Turbines – Pelton, Kaplan, FrancisPumps – Centrifugal, Reciprocating, Submerged – Jet and Gear

4 Survey Lab TheodolitesLevelling instrumentTotal station*

5 Environmental Engg.Lab B.O.D. incubatorU.V.Spectro photometer

6 Strength of Materials & Structures Lab

100 Ton UTM40 ton UTM300 Ton compression testing machineLoad cells and LVDT with Data loggerLoad frame (100 T capacity)Ultrasonic TesterVibration generator and Accelerometer

7 Computer Lab Pentium - IV Systems - 15 Nos.Software packages

* - Purchase under process

NoName of the

Course


Major equipment

5Dept.of

Mechanical Engineering Special Machine shop

Hydraulic Surface GrinderShaping MachineUniversal Milling MachineRadial Drilling MachineVertical Milling MachineHydraulic Universal Cylindrical GrinderUniversal Tool & Cutter GrinderGear Hobbing MachinePlanning MachineSlotter

1

2 CAM Lab CNC Bench Milling MachineXL Turn, model: CNC Slant bed Lathe XL Turn, model: CNC Slant bed Lathe

3 Machine Shop All Geared Lathe – Kirloskar – 6 Nos.All Geared Lathe – LahorePSG A141E Lathe - PSGAll Geared Lathe – PSGAll Geared Lathe – PSGMMT Grade one Turnomax 1730 Lathe –

Turnomax – 3 Nos.Parmar – High Precision – ParmarAll Geared Lathe Qetcos HMT LTM – 20/1000 – Kerala QetcosCentre Lathe RDU-260/38 – Gedee WeilerHMT Turret Lathe Model: L22 TP -HMT

4 Foundry Shop Oil Fired Crucible Tilting furnace5 Steam Lab Horizontal Fire tube Boiler

Steam Turbine6 I.C. Engines Lab Two Stage Twin Cylinder ELGI make Air

compressor4 Stroke petrol engine with hydraulic dynamometer Test RigTwin cylinder 4 stroke diesel engine test rigAir blower Test RigSolar water HeaterVariable compression ratio petrol engine test rig.

7 CAD Lab 7.5 KVA Uninterrupted Power supply system11 Nos. of Computer system

CAD/CAM Lab AutoCAD - 7 Nos.CATIA - 5 NosAutoCAD – R12 - 1 NoANSYS 8.1 Version - 5 NosCADEM 8.1 Version - 5 NosMTAB Offline Milling Software - 1 NoMTAB Turning software - 1 No.

SlNo

Name of theCourse


Major equipment

61

Electrical & Electronics Engg.

Electrical Machines Lab

Rectifier UnitInduction generator coupled with DC MotorSynchronous motorSingle Phase AlternatorThree phase AlternatorThree phase Induction MotorSingle phase Induction MotorDC MotorsDC Generator DC Motor sets.

2 Control System Lab Servo Stabilizer UnitDigital Storage OscilloscopeSynchrotranemilter & ReceiverDC & AC Servo meterTransducer modulesDC Position Control moduleI, II & III Order simulators.

Applied Electronics Lab

Cathode ray OscilloscopesChopper Power circuit with firing circuitServo voltage stabilizerChopper based drive with DC motorVariable frequency AC drive with drive motorRectifier unitIGBT based PWM Inventor

PLC & DSP traniner kit

5Power System Simulation Lab

Servo StabilizerOrcad – Software with Pspice AD8085 & 8051 simulatorcomputers

6System Simulation Lab

Pentium D(Dual core) – 5 Nos.Pentium IV – 7 Nos.Pentium III – 4 Nos.


Name of the laboratory/work

shopMajor equipment

7 COMPUTER SCIENCE & ENGINEERING1 Software

LabPentium IV Systems – 264 Nos.Inter Xeon Server – 2 Nos.Itanium Server – 1 No.IBM AIX Server – 1 No.

2 Microprocessor Lab

100 MHz dual trace oscilloscopeMicroprocessor Trainers & interface boardsDSP Trainer systems

List of Experimental Setup As per Anna University syllabus

COMPUTING FACILITIES:

Number and Configuration of Systems

TOTAL NUMBER OF COMPUTERS : 394NO. OF PIII : 53NO. OF PIV : 305Others : 36XEON SERVER : 2ITANIUM SERVER : 1IBM SERVER : 1WEB SERVER : 1

PIV Configuration

Intel Pentium-IV @ 3.0GHz Processor or latest with HTT Intel original Motherboard with Intel 915G chipset. 2 MB L2 cache, 800 MHz FSB, Integrated Intel GMA. 1GB 800 MHz DDR-II RAM, memory support up to 2 GB, 1.44 MB FDD. 80 GB HDD, 10000 rpm, SATA. 2 PCI, 1 Parallel, 1 Serial, 2 PS/2 & 4 USB Integrated 10/100 Ethernet card 17” SVGA color NI monitor-MPR II. PS/2 107 keys OEM Keyboard PS/2 Optical Scroll mouse with pad, Desk top Cabinet, Microsoft windows certified. 52X CD ROM – InternalThe product should be preloaded with a single key CRASH PROOF data loss prevention software, OS and latest Antivirus with one year free updation.

Pentium-IV (Dual core) 2.8GHz, 64bit Processor Intel original Motherboard with Intel 945G chipset. 2 MB L2 cache, 800 MHz FSB, Integrated Intel GMA. 1GB 800 MHz DDR-II RAM, memory support up to 2 GB, 1.44 MB FDD 80 GB HDD, 10000 rpm, SATA. 2 PCI, 1 Parallel, 1 Serial, 2 PS/2 & 4 USB Integrated 10/100 Ethernet card

17” SVGA color NI monitor-MPR II. PS/2 107 keys OEM Keyboard PS/2 Optical Scroll mouse with pad, Desk top Cabinet, 52X CD ROM – Internal The product should be preloaded with a single key CRASH PROOF data loss prevention software, OS and latest Antivirus with one year free updation.

PIV Configuration

MICROPROCESSOR BASED COMPUTER SET CONSISTING OF PCS P4 2.4 WXP PRODILGY 5G02702 TO 2709(PENTIUM 4 CPU 2.4 GHz / 256 MB DDR RAM / 1.44 MB FDD / 40 GB HDD / 512 kb CACHE / 15” CM SVGA / 107 Kbrd / SCROLL MOUSE + PAD / INTEGRATED GRAPHICS / ADD ON 10-100 Mbps ENET CARD / ONBOARD SOUND / 1S-1P / CD-ROM 52X / ATX CABINET WITH SMPS/WINDOWS XP)

PIV Configuration

PCS PIV 2.8 GHz INTEL ORIGINAL MBRD / 512 MB DDR / 1 MBL2 CACHE / 1.44 FDD / 80 GB HDD / 15 CM / 10/100 LAB / 1S 1P / 4 USB PORTS / PS/2 MECH KEYBOARD / PS/2 2 BUTTON OPTICAL SCROLL MOUSE / ATX CABINET WITH SMPS / 52X INTERNAL CD-ROM DRIVE / 17”CM IN LIEU OF 15 CM / WITH OS

PIV Configuration

PCS PIV 2.8 GHz INTEL ORIGINAL MBRD / 512 MB DDR / 1 MBL2 CACHE / 1.44 FDD / 80 GB HDD / 15 CM / 10/100 LAB / 1S 1P / 4 USB PORTS / PS/2 MECH KEYBOARD / PS/2 2 BUTTON OPTICAL SCROLL MOUSE / ATX CABINET WITH SMPS / 52X INTERNAL CD-ROM DRIVE / 17”CM IN LIEU OF 15 CM / WITH OS/HEAD PHONE WITH MIC

PIII Configuration(Accel) PENTIUM III 866 MHz, 256 KB CACHE, 128 MB SDRAM, 20 GB HDD, 15” COLOUR MONITOR (N1), AGD WITH 4MB RAM, 1.44 MB FDD, 104 KEYS KEYBOARD, 2 SERIAL PORT, 1 PARALLEL PORT, 2 USB PORT, 52X CDROM DRIVE WITH MULTIMEDIA KIT, 32 BIT ETHERNET CARD 10/100 Mbps, MOUSE WITH PAD, WITH WIN 98

PIII Configuration INFINITI 2000 BLDS MXM 8110 CPU FCPGA PIII 700 MHz 100 FSB 256 CACHE KIT-SDRAM PC 100 64 MB UN-BUFF NON-ECC 20 GB 1DE HDD, 1.44 MB MINI FLOPPY DRIVE OF 3.5 MS-DOS 6.22 LICENCE TO USE 107 KEYS WIN 98 MECH KBD, MS INTELLIMOUSE W / WHEEL TYPE PS/2, 14” DIGITAL COLOR MONITOR ASET OF TWO AMPLIFIED SPEAKERS HANDS FREE MICROPHONE, 52X CD-ROM 1DE DRIVE

PIII Configuration

INFINITI 2000 BCM 8110 CPU FC DGA PIII 700 MHL 100 FSB 256 CACHE KIT-SD RAM PC/100 64 MB UN-BUFFNON-ECC 20 GB 1DE HDD / 1.44 MB MINI FLOPPY DIRVE / 52X CD-ROM / DE DRIVE KIT-MS-WIN98 PRELOADED W/REC CD MEDIA HANDS FREE MICROPHONE 107 KEYS WIN:98 MECH KAD (CPS/SLF) MS INTELLI MOUSE W/WHELL TYPE PS/2, NORTRON ANTIVIRUS PRELOADED BASIC-PACK FOR WIN 95/98 ONETIME 160 JAZZ J1104171 SPEAKER, 14”DIGITAL COLOUR MONITOR MPR II

PIII Configuration

INFINITI 2000 BLDS MXM8110 CPU FCPGA PIII 650 MHz 100 FSB 256K CACHE, KIT-SDRAM PC 100 64MB UN-BUFFNON ECC 20GB 1DE HDD, 1.44 MB MNI FLOPPY DRIVEOF 3.5, 52X CD-ROM 1DE DRIVE MS-DOS 6.22, LICENCE TO USE (COA AND MANUAL) 120 W MM HCL SPEAKER HAND FREE MICROPHONE, 107 KEYS WIN 98 MECH KBD (PS/211F) MS INTELLIMOUSE W/WHEEL TYPE PS/2, 14” DIGITAL COLOUR MONITOR-MPR II

PIII Configuration

INF 2000 MXM7 550/32/84b/1.44/DOS LTU 14”DIGITAL MONITOR – MPR II 107 KEYS WIN 98 MECH KBD( PS/2 I/F) KIT-MS INTELLIMOUSE WITH WHEEL(PS/2) DIMM 32 MB PC100 NON ECC UNBUFF, CREATIVE 52X MULTIMEDIA KIT

PIII Configuration

INF 2000 MXM6N CEL 466/32 MB(VGA-SOUND), CPU, CELERON, PPGA 4.66 MHz WITH 128K CACHE, DIMM 32 MB PC100 P8S416-1A, 1.44 MB MINI FLOPPY DRIVE OF 3.5, 8 GB INTERNAL ULTRA ATA HDD, 107 KEYS WIN98 MECH KBD(PS/21/F), KIT-MS INTELLIMOUSE WITH WHEEL(PS/2), 14” DIGITAL COLOR MONITOR – MPR II, 48 * 1DE CD-ROM DRIVE INTERNAL, MS-DOS 6.22 LICENCE TO USE/COAS MANUAL

PIII Configuration

INFINITI 2000 HL FOR DGSD, MODEL T9B, DIMM 32 MB PC100 P85416.A, AGP(2X) VGA CARD WITH 4 MB, 4.3 GB ULTRA DMA ATA-33 EIDE HDD, 1.44 MB MINI FLOPPY DRIVE OF 3.5, KIT-MS-WINDOWS 95 LICENCE TO USE, 107 KEYS WIN 98 MECH KBD(AT INTERFACE), KIT MS INSTELLIMOUSE WITH ANTISTATIC PAD, BASIC-PACK FOR WIN 95/98 ONE TIME, CPU PENTIUM-III 450 MHz/512K CACHE W/ECC, HCL 14”DIGITAL COLOR VGA MONITOR

ITANIUM -- 1

1). PCS INTE 2LV1.3 LNX SERVER 6S07588 (ITANIUM 2LV) INTEL ITANIUM 2LV 1.3 GHz WITH 3MB L3C 2*1 GB ECC DDR/73 GB SCSI HDD/17”CM/KBRD/OPT MOUSE/10-100-1000 LAN/1S1P/COMBO DRIVE---1

2). 2*1 GB ECC DDR RAM---1

3). ANTIVIRUS S/W SERVER EDI PAPER LIC---1

4). ANTIVIRUS S/W CLINET EDI PAPER LIC ---1

XEON -- 2

1). PCS XN 2.8 SERVER INTEL XEON 2.8GHz/1MBL2 CACHE, 800FSB DUAL CPU INTEL ORIGINAL MBRD, 2*1GB ECC DDRAM/1.44FDD/2*36 GB SCSI 17CM/ONBRD INTEL PRO 1000 LAN/SCSI CNTRL 1S1P / 4 USB / 1 PS/2 / 2 KBRD / 1 PS / 2 MOUSES / DVD WRITER / 52 * CDR / ATX CABINET WITH SMPS / MECH KBRD PS/2 OPTICAL SCROL MOUSE WITH PAD

2). 2 GB (2*1) 266 MHz ECC DDR RAM

IBM SERVER – 1

IBM SERVER P-Series 510 with AIX 5.3 OS with software DB2 8.2 database

Total number of systems connected by LAN /WAN : 275

Internet Bandwidth

1Mbps dedicated Line

Major Software Packages AvailableSNO SOFTWARE

1 MS Visual Studio 6.0 Enterprise Edition MS Visual C++ MS Visual Basic MS Visual J++ MS Visual FoxPro MS Visual InterD ev MS Image Editor

2 MS Office 2000 MS Word MS Excel MS Power Point MS Access MS Front Page Editor MS Outlook Express

3 Back Office Server 2000 Windows 2000 Server SQL Server 2000 IIS Server ISA Server

4 Rational Enterprise Suite Rational Clear Case LT Rational Requisite Pro Rational Test Rational SODA etc

5 Linux 9.0 Server6 Linux Desktop 9.07 Java 1.2 SDK8 Borland J Builder X9 Win Proxy (Proxy Server)

10 Turbo Assembler 5.011 Windows 2003 Server12 Windows NT 4.013 Windows 9814 Windows XP15 Novel Netware 3.11

16 ORACLE 7.0 Forms 4.5 Reports 2.5 Graphics 2.5

17 MS DOS 6.2218 Paradox RDBMS Engine19 Turbo Pascal20 Turbo Tool Box21 Turbo Prolog

22 Turbo C23 LOTUS 12324 DBASE III Plus25 Bharathi Tamil Software

Special Purpose Facilities Available

1. Internet Browsing Centre2. Language Lab

WORKSHOP: List of facilities available

Games and Sports Facilities

INDOOR GAMES OUTDOOR GAMES GYMNASUIM1. Table Tennis 1. Foot Ball 1. Tread Mill2. Chess 2. Volley Ball 2. Weight Lifting3. Carom 3. Ball Badminton 3. Parallel Bar

4. Horizontal Bar5. Kabaddi 5. Multi-GYM

(12Station)4. Basket Ball

Extra Curricular Activities

National Service Scheme Leo ClubRotract ClubClub of Fine Arts and Photography Kalai kuil Tamil Peravai Youth Red Cross Literary and Debating Association (LADA)Meditation Art of Living

Soft Skill Development Facilities Personality development courses Communication skills course Special attention for Tamil medium students Group discussion and interview techniques

Number of Classrooms and size of each

Number of Classrooms Size of each33 68.63 Sq.m

Number of Tutorial rooms and size of each : Nil Number of laboratories and size of each

S. No. Name of the Laboratory / Workshop Area available

(Sq. M.)Dept: 1. Automobile Engineering

1 Engine Testing Lab 281.00

2 Automotive Engine Components 86.40

3 Automotive Chassis Components 140.32

4 Automotive Electrical Lab 58.32

5 Reconditioning Lab 70.00

6 Vehicle Maintenance Lab 120.55

7 CAD Lab 59.74

Dept. 2. Mechanical Engineering

1 Engineering Practice Lab 379.32

2 Machine shop 379.32

3 Foundry Lab 186.76

4 Special Machine shop 379.32

5 Thermal engineering Lab 379.32

6 Dynamics Lab 98.1

7 CAD Lab 98.1

8 Metrology Lab 58.5

9 CAM Lab 71.1

Dept. 3 Civil Engineering

1 Strength of Materials Lab 225.00

2 Hydraulics Lab 413.00

3 Survey Lab 90.00

4 Soil Mech. Lab 90.00

5 HIGHWAY Material Lab 90.00

6 Environmental Engineering Lab 90.0

7 Computer Lab 27

Dept. 4 Electrical and Electronics Engineering

Electrical Machines Lab 222.3

Instrumentation and Control System Lab 135

Applied Electronics Lab 216

Power System Simulation Lab 58.50

Computer Lab 135

Dept. 5 Electronics and Communication Engineering

Digital Lab /Electronics Lab 90.72

Communication Lab/ Microwave Lab 54.23

DSP Lab/VLSI Lab 100

Microprocessor Lab 86.31

Dept. 6 Information Technology

Computer Lab 67.26

Microprocessor Lab 67.26

Dept . 7 Computer Science and Engineering

Software Lab 246.88

B. E. First Year Lab

Physics and Chemistry 491.51

Number of drawing halls and size of each

Sl.No.

No. of Drawing halls Size of each

1 I-5 439.18 Sq.m2 A-1 222.39 Sq.m3 CE-5 131.67 Sq.m4 Mech 313.11 Sq.m

Number of Computer Centres with capacity of each

Sl.No.

No. of Computer Centres Capacity of Each

1 Computer Centre 264 2 Automobile Engineering 173 Civil Engineering 104 Mechanical Engineering 205 Electronics & Communication

Engg16

6 Electrical & Electronics Engg 167 Information Technology 608 Multimedia Lab 019 Library 05 Central Examination Facility - available.

Number of rooms and capacity of each.

Name of the Hall Capacity of each.I-5 200I-1 to I-4 60 eachCivil T-1 to T-4, T-6 70 eachMechanical (M-1,M-2,M-8,M-6,M-7)

70 each

Assembly hall 75Electronics & communication Engg CT-10, CT-11 70 eachComputer Science & EngineeringAD-21, AD-22, AD-23 70 eachElectrical and Electronics Engineering3 classrooms

70 each

Construction of Guest House is over Construction of Structure Lab is over

New Construction

ECE west and east wing Computer Science and Engineering Dept. Separate Block Hostel with accommodation for 100 students

These proposals will be started after the approval from governing council.

Teaching Learning process

Curricula and syllabi for each of the programmes as approved by the University. – attached in Annexure - VI

Academic Calendar of the University - attached in Annexure - VII

Academic Time Table - attached in Annexure - VIII

Teaching Load of each Faculty - attached in Annexure - IX

Internal Continuous Evaluation System and place As per Anna University regulations

Students’ assessment of Faculty, System in place. Students feedback form attached in Annexure -I

For each Post Graduate programme give the following:

i. Title of the programme M.E., Structural Engineering ii. Curricula and Syllabi

Anna University syllabus –attached in annexure - Refer Annexure -VI

iii. Faculty Profile

SI

NAME DESIGNATION

SUBJECT TEACHING

M.E., Structural Engineering1 Dr. G.S. Thirugnanam Asst Prof 1.Structural Dynamics

2. Steel structural3. Constitutive models and modes of failure

2 Mr. G. Srinivasan Lecturer(Selection Grade)

1. Concrete structures2. Experimental Stress Techniques3.Maintenance, Repair and Rehabilitation of structures.

Brief profile of each faculty. - attached in annexure - II Laboratory facilities exclusive to the PG programme

Structures and SM Lab1. Universal Testing Machine 100 t capacity2. Data Logger (20 channels)3. Accelerometer4. Vibration Generating system5. Test Frame 100 t capacity6. Push pull Jack 30 t capacity – 3 Nos.7. Load Cell - 50 t – 2 Nos.

20 t - 1 No. 10 t - 2 Nos

8. LVDT9. Ultrasonic Testing Machine (NDT) (Pandit make)

10. Structural Engineering Lab under construction

Special Purpose

Software, all design tools in case 1. SAP & ETABS2. ANSYS3. STADPRO

Academic Calendar and frame work Research focus – 1. Concrete Technology, 2. Behaviour of

Steel Structures

List of typical research projects. M.E Structural Engineering

LIST OF M.E. PROJECTS DURING 2007-2008

S.No Title of the Project Name of the Guide Name of the Student1. Seismic vulnerability analysis of

multistory RC buildings

Ms. N.R. Chitra K. Anilbabu

2. Analysis of welded connections for

hollow tubes

Dr.R.Murugesan Beneesh Jenolphin

3. Analysis of kspace frames for large

span flat roof structures

Mr.P.Saravanakumar

G.Sivacidambaram

4. Experimental study on behaviour of

SFRC beams subjected to cyclic

loading

Dr.G.S.Thirugnanam

D.Bhuvaneswari

5. Study on prevention of corrosion in

RCC beam element using cathodic

protection method

Mr.G.Srinivasan V.Vennila

6. Experimental investigation on repair Dr.G.S.Thirugnana S.Manikandan

of corroded RC columns m

7. Experimental study on behaviour of

RC beams strengthened with GFRP

and polypropylene sheet wrapping

Dr.G.S.Thirugnanam

M.Ravichandran

8 Experimental study on behaviour of

RC beam column joints subjected to

cyclic loading

Dr.G.S.Thirugnanam

S.Ramesh

9. .Analytical and experimental Dr.G.Baskar P.Loganathan

Industry Linkage Industry Institute Partnership cell formed in the Institute.MOU signed with M/s S.P.B. Erode, M/s Infosys, Bangalore and M/s. Syscol Mettur. Arrangements for signing MOU with M/s UCOL, Chennai M/s.Delphy-TVS, Chennai and IBM are in progress.

List of publications:

1.Srinivasan.G.,and Thirugnanam..G.S., “Corrosion Prevention Study on RCC beam using anticorrosive coatings”, International Conference on Recent Advances in Concrete and Construction Technolgy, SRM Institute of Technology, Chennai, December 2005,pp 649-654

2.Kamal.T.,and Thirugnanam.G.S.,” Influence of Mineral admixtures on Strength characteristics of Concrete”, National conference on Front line areas of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp 650-658.

3.Prakash.K., and Thirugnanam.G.S.,”Bond Strength of FRP wrappings of Concrete Beams,” National conference on Front line areas of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp 797-802.

4.Prithviraj.k., and Thrugnanam.G.S.,” Seismic behaviour of Flat slab Structures”, National conference on Front line areas of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp 679-688

5.Vivekanandan. And Thirugnanam.G.S.,” Strength and Stability of Space grids”, National conference on Front line areas of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp 751-757

6.Deepa.aAnd Thirugnanam.G.S.,” Influence of Mineral admixtures on Strength characteristics of Concrete”, National conference on Front line areas of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp 665-672

7.Jayakumar. And Thirugnanam.G.S.,”Influence of different voltages on Rebar corrosion in High Performance Concrete”, National conference on Front line areas

of Civil Engineering, VLB Janaki Ammal College of Engineering and Technology, Coimbatore, April 2006, pp

8.Prasad.C., and Thirugnanam.G.S.,”Effects of damages on the Natural frequency of simply supported beams”, National conference on Extreme Engineering and Technological Advancements-XETA 2006, Jayam College of Engineering and Technology, Dharmapuri, April 2006, pp----

9.Shilpa., and Thirugnanam.G.S.,” Ultimate Strength Assessment of RC Shell Structure considering Material and Geometric Non-Linearity”, National conference on Extreme Engineering and Technological Advancements-XETA 2006, Jayam College of Engineering and Technology, Dharmapuri, April 2006, pp---

10.Meena. And Thirugnanam.G.S.,” An Experimental and Theoretical Investigation on Steel Lattice Arch”, National conference on Concrete Technology for the Future”, Kongu Engineering College, Perundurai, April 2006, pp 783-789

11.Dhanasekaran., and Thirugnanam.G.S.,” Non-Linear Response Prediction of Rc framed Structure using ANN”, National conference on Concrete Technology for the Future”, Kongu Engineering College, Perundurai, April 2006, pp 757-768

12.Deepa.and Thirugnanam.G.S.,”Durability characteristics of Concrete using mineral admixtures”, National conference on Concrete Technology for the Future”, Kongu Engineering College, Perundurai, April 2006, pp 355-361

13.Kamal., and Thirugnanam.G.S.,” Strength characteristics of Concrete using mineral admixtures”, National conference on Concrete Technology for the Future”, Kongu Engineering College, Perundurai, April 2006, pp 124-130

14.Vivekanandan.and Thirugnanam.G.S.,” An Experimental and Theoretical Investigation of Space grid”, National conference on Concrete Technology for the Future”, Kongu Engineering College, Perundurai, April 2006, pp 751-757

15.Mohanraj.K., Shivaraj. And Thirugnanam.G.S.,” Seismic Behavior of SFRCX beams under cyclic loading”, Second National conference on Advances in materials and mechanics of Concrete structures”, IIT Madras, August 2005, pp 278-288

16.Rabi Ahamed. And Thirugnanam.G.S.,” Experimental Investigation and Analytical Modeling of SFRC Beams”, National conference on Recent Trends in Concrete Composites for Structural systems, Kongu engineering college, Perundurai, March 2007, pp 341-345

17.Sivakarthikeyan. And Thirugnanam.G.S.,” Experimental study on SIFCON”, National conference on Recent Trends in Concrete Composites for Structural systems, Kongu engineering college, Perundurai, March 2007, pp 489-491

18.Thirugnanam.G.S., “Ductile Behaviour of RC frames with SIFCON beam-column joints”, Key Note Lecture delivered in National conference on Earthquake and Transportation Engineering, Sona College of Technology,Salem, March 2007, pp EQ 35- EQ 42.

19.Rabi Ahamed. and Thirugnanam.G.S.,” Experimental Investigation of SFRC Beams under reversed cyclic loading”, National conference on Earthquake and Transportation Engineering, Sona College of Technology,Salem, March 2007, pp EQ 175- EQ 185.

20.Thirugnanam.G.S.,” Special Concretes”, Key Note Lecture delivered in National conference on Extreme Engineering and Technological Advancements-XETA 2007, Jayam College of Engineering and Technology, Dharmapuri, April 2007, pp---

21.Rabi Ahamed. and Thirugnanam.G.S.,”Experimental Investigation on Ductile Behaviour of SFRC beams”, National conference on Extreme Engineering and Technological Advancements-XETA 2007, Jayam College of Engineering and Technology, Dharmapuri, April 2007, pp—

22.Sivakarthikeyan., and Thirugnanam.G.S.,” Experimental study on SIFCON-A high performance material”, National conference on Extreme Engineering and Technological Advancements-XETA 2007, Jayam College of Engineering and Technology, Dharmapuri, April 2007, pp—

23.Prasathkumar., and Thirugnanam.G.S.,” Flexural behaviour of HPC elements under chloride induced corrosion”, National conference on Extreme Engineering and Technological Advancements-XETA 2007, Jayam College of Engineering and Technology, Dharmapuri, April 2007, pp----

24.Prasathkumar., and Thirugnanam.G.S.,” Flexural behaviour of HPC elements under chloride induced corrosion”, National conference on Front lines of Civil Engineering,20 – 21 April 2007, VLBJCET, Coimbatore. Pp 265-272

25.Kumaran.M. and Thirugnanam.G.S.,” Durability Characteristicc Study of HPC and OPC Concretes with Mineral Admixture, National conference on Front lines of Civil Engineering,20 – 21 April 2007, VLBJCET, Coimbatore. Pp 255-264.

26.Rabi Ahamed. and Thirugnanam.G.S.,” Ductile and Flexural Behaviour of SFRC Beams under Cyclic Loading., The state of Art about Recent Theories,Techniques and Design in Structural Engineering.-2007, Bannari Amman Institute of Technology.,27 – 28 April 2007, pp 170 -174.

27.Rabi Ahamed. and Thirugnanam.G.S.,” Ductile and Flexural Behaviour of SFRC Beams under Cyclic Loading., National conference on Front lines of Civil Engineering,20 – 21 April 2007, VLBJCET, Coimbatore. Pp 273-279.

28.Rabi Ahamed. and Thirugnanam.G.S.,” Seismic Behaviour of SFRC Beams under Cyclic Loading., National conference on Recent Advances in Structural Engineering. Government College of Engineering, Salem,11 – 12 April 2007, pp 15.1 – 15.8.

29.Rabi Ahamed. and Thirugnanam.G.S.,” Seismic Behaviour of SFRC Beams under Cyclic Loading., National conference on Advances and Innavoations in Civil Engineering, Mepco Schlenk College of Engineering College, Sivakasi, March 24, 2007, pp 224 – 230.

30.R.Murugesan & N.V.Ramamoorthy, Comparison of Level of Public Transport Service of Different Ownerships by Numerical Rating and Fuzzy Set Approaches, Journal of Indian Roads Congress, 2006

31.R.Murugesan & N.V.Ramamoorthy, Impact of Service Changes on Bus Transport Performance, Indian Journal of Transport Management, Vol.30, No.4, 2006

32.R.Murugesan , Study of Traffic Operations at Rotaries and their Capacity Enhancement, National Conference on Advances in Road Transportation, National Institute of Technology, Rourkela, Orissa, Feb.2005

33.R.Murugesan , N.R.Chitra and P.Saravanakumar, Effect of Partial Replacement of Sand by Quarry Dust in Concrete with and without Super Plasticizer, National Conference on Concrete Technology for the Future, Kongu Engg. College, Perundurai, Apr.2006.

34.A.Johnson, R.Murugesan, and A.R.Santhakumar, Behaviour of Reinforced Cement Concrete with Synthetic Fiber as a Secondary Reinforcement under Compression, Tension and Flexure, National Conference on Concrete Technology for the Future, Kongu Engg. College, Perundurai, Apr.2006.

35.A.Johnson, A.Kanagasabapathi, R.Murugesan, and A.R.Santhakumar, Behaviour of Reinforced Cement Concrete with Synthetic Fiber as a Secondary Reinforcement under Shear, National Conference on Concrete Technology for the Future, Kongu Engg. College, Perundurai, Apr.2006.

36.A.Kanagasabapathi, R.Murugesan, and A.R.Santhakumar, Experimental Investigation on Fundamental Properties of Synthetic Fiber Reinforced Concrete, National Conference on Extreme Engineering and Technological Advancements, Jayam College of Engineering and Technology, Dharmapuri, Apr.2006.

37.R.Murugesan , Global Positioning System for Vehicle Tracking, National Conference on Earthquake and Transportation Engineering, Sona College of Technology, Salem, Mar.2007.

38.B.N.Kumar and R.Murugesan, Experimental Study on High Volume Concrete, National Conference on Extreme Engineering and Technological Advancements, Jayam College of Engineering and Technology, Dharmapuri, Apr.2007.

39.S.Parimala and R.Murugesan, Strength and Durability Characteristics of High performance Concrete using Mineral Admixtures, National Conference on Extreme Engineering and Technological Advancements, Jayam College of Engineering and Technology, Dharmapuri, Apr.2007.

40.Traffic Congestion – Causes and Remedies National Conference on ‘Earthquake and Transportation Engineering’, Sona College of Technology, Salem, March, 2007.

41.Pre-Engineered Metal Buildings: The Latest in Building Construction”, National Conference on ‘Extreme Engineering and Technological Advancements, Jayam College of Engineering and Technology, Dharmapuri, April. 2007.

42.Optimised Design of Pre-Engineered Buildings, National Conference on ‘Frontline Areas of Civil Engineering’, V.L.B.Janakiammal College of Engineering and Technology, Coimbatore, April, 2007.

CONSULTANCY WORK COMPLETED DURING ACADEMIC YEAR 2007-2008

SL.NO NAME OF WORK AMOUNT IN RS.

CLIENT

1Cement Concrete Mix

Design 66,000.00

Public Work Dept., Mettur Dam,Nabard & Rural Road, Bhavani,Nabard & Rural Road, Erode,

2Cement Concrete

Pavement Design63,000.00

Erode Municipallity,Arcot Municipallity,Kangeyam Town Panchayat,Salem Corporation

3 Bitumen Pavement Design 18,000.00 Salem Corporation

4 Soil Visual Test 36,000.00Komarapalayam MunicipalityGobichettipalayam MunicipalitySalem CorporationVandavasi Municipality

5 Structural Design 38,648.00Vandavasi MunicipalitySouthern Railways, ErodeArcot MunicipaltyGobichettipalayam Municipality

6

Testing of Construction

materials like

Brick, Cement,

Aggregates,

Steel Rod, Cement

Concrete Cube

43,818.00

Kangeyam Town Panchayat,Public Work Dept., Mettur Dam,Bhavani MunicipalityErode MunicipaltyModakkuruchi Town PanchayatVellotam Palayam Town PanchayatNabard & Rural Road, Bhavani,Nabard & Rural Road, ErodeSKM Poods Ltd, ErodeBlock Development Office, ErodeDRDA, ErodeTamilNadu State Transport Corporation, ErodeIRT-PMC Project Wing

Total Amount 2,65,466.00 The Department of Civil Engineering has done the Consultancy Work for the amount of Rs.2, 65,466. 00 in the Academic Year 2007-2008

Placement Status

C . Gunasekaran, M. E., Structures selected as graduate training in Technip (SPIC) , Chennai

Admission procedure

As per Anna University norms Fee Structure

Rs.38,000/= per annum (Tuition fee) Hostel Facilities - Available Contact address of co-ordinator of the PG programme

Name: Dr. B. Viswanathan, PrincipalAddress: Institute of Road and Transport Technology

Vasavi College PostErode – 638 316Erode – DistTamil Nadu

Telephone: 0424 - 2533279, 2533579E-mail: [email protected]

ANNEXURE – I

INSTITUTE OF ROAD AND TRANSPORT TECHNOLOGY, ERODE – 638 316

STUDENTS EVALUATION OF INSTRUCTION

Academic year : Semester and Branch :Name of the Teacher :

Department :

Subject :

(Theory/Practical/Tutorial/Design/Drawing/Project work)

Note: Place a tick against one of the alternatives given for each question as per your assessment. The number against each alternative represents the score for it.

I. Class Room Instruction (Lecturers)

1.Knowledge of subject4. Exceedingly well informed 3. Adequately informed2. Not well informed 1. Scantily informed0. No remarks.

2.Ability to explain4. Clear and well-defined 3. Fair2. Satisfactory 1. Unsatisfactory0. No remarks

3.Use of example to clarify the material4. many 3.Adequate2.Few 1.None0.No remarks

4.Opportunity for raising question and discussion4.Ample 3.Occasional2.Rate 1.Discourages0.No remarks

5.Presentation of class material4.Well organized 3.Fairly organized2.Satisfactory 1.Unsystematic0.No remarks

6.Regularity in engaging classes4.Highly regular 3.Fairly regular2.Rarely 1.Takes few classes0.No remarks

7.Fairness and Impartiality4.Fair and impartial 3.Generally fair2.Doubtful 1.Biased

0.No remarks

8.Use of teaching aids4.Good 3.Satisfactory2.Rare 1.Never0.No remarks

9.Attitude towards students difficulties4.Sympathetic and helpful 3.Usually sympathetic and helpful2.Avoids,but not unhelpful 1.Unhelpful0.No remarks

10.Overall assessment of teacher4.Very good 3.Good2.Fair I.Poor0.No remarks

11.Laboratory Instruction: Give ratings in the scale 0 to 4

0. No remarks 1. Poor 2.Fair 3.Good 4.Very good

No. Items Rating

1. Interesting

2. Relevant to class room instructions

3. Well organized in terms of time,Equipment and instructional

material4. Guidance provided by teacher in

Handling equipment5. Guidance provided by teacher

inPreparing lab. Reports.

6. Quizes conducted

7. Lab reports periodically examinedAnd returned within reasonable time

8. Communicates effectively with students

9. Responds adequately to doubts/questions

10. Engages lab. Classes punctually

III. Tutorial/Design/Drawing/Project work: Give ratings in the scale 0 to 4

0. No remarks 1. Poor 2. Fair 3. Good 4. Very good

No. Items Rating

1. Interesting

2. Work relevant to course/programme

3. Well organized in terms of time

4. Well organized in terms of coverage

5. Guidance provided by teacher inUnderstandings the subject

6. Stimulates discussion in the class

7. Assignments periodically examinedAnd returned in time

8. Encourages students to raise questions

9. Engages classes punctually

10. Communicates effectively.

DEPARTMENT OF AUTOMOBILE ENGINEERING

STAFF PROFILE

1. Name :Dr.N.NEDUNCHEZHIAN

2. Date of Birth :30.07.1962

3. Educational Qualification :Ph.D.

4. Work Experience :

a. Teaching :19 years

b. Research :13 years

c. Industry :11/2 years

d. Others :--

2. Area of Specializations : B.Tech -Automobile Engineering

M.Tech –IC Engines & Gas Turbines

Ph.D – Mechanical Engineering

3. Subjects teaching at Under Graduate level :1. Automotive Diesel Engines

:2. Automotive Electronics 3. Environmental Engineering

Post Graduate level :--4. Research guidance

No. of papers published in Master’s - National Journals : 2Ph.D. 7 - International Journals : 5

- Conferences : 385. Projects Carried out :1. AICTE-MODROBS Project on PC Based Data Acquintson System (Rs.5.50 lakhs)

2. TNSTC Project on “Use of Ethanol in Diesel Engines” Rs.21.00 Lakhs. 6. Patents : --

7. Technology Transfer :--


9. No.of Books published with details:

STAFF PROFILE

1. Name :P. SELLAPPAN

2. Date of Birth :14.05.1958

3. Educational Qualification :M.E.


a. Teaching : 23 years

b. Research :--

c. Industry :--

d. Others :--

5. Area of Specializations : B.Tech -Automobile

M.E –Automobile

Ph.D - --

6. Subjects teaching at Under Graduate level : Automobile Engineering Subjects

Post Graduate level : --7. Research guidance

No. of papers published in Masters’s - National Journals : 05Ph.D. - International Journals : --

- Conferences : --8. Projects Carried out : --

9. Patents : --

10. Technology Transfer : --

11. Research Publications : --

12. No.of Books published with details : --

STAFF PROFILE

1. Name :Dr.R. SUBRAMANIAN

2. Date of Birth :10.05.1963

3. Educational Qualification : B.E, M.E. Ph.D.



b. Research : --

c. Industry : --

d. Others : --


M.E –Automobile Engineering

Ph.D –(Mechanical Engg) Alternative Fuels

6. Subjects teaching at Under Graduate level : Applied Thermodynamics, Renewable Source of Energy, Alternative fuels, Vehicle Dynamics Post Graduate level : --


No. of papers published in Masters’s - National Journals : 5Ph.D. - International Journals : 2

- Conferences :15 Projects Carried out :2

1. Technical viability of using Ethanals an alternative fuel for commercial

Transport Vechicles Funded by TNSTC, CBE.

2. Indegeneous resource utilization: Development of Diesel – Ethanal,

Vegitable oil hybrid fuel blends and Find testing in commercial

transport vehicles funded by DST, Govt.of India for Rs.20.7 lakh

8. Patents : --


10. Research Publications :22


STAFF PROFILE

1. Name :E.RAJASEKAR

2. Date of Birth :27.05.1963

3. Educational Qualification : B.Tech., M.E.



b. Research :

c. Industry : --

d. Others : --



Ph.D –Alternative Fuels.

6. Subjects teaching at Under Graduate level :Automobile Engineering Papers Mechanical Engineering Papers

Post Graduate level :



- Conferences :118. Projects Carried out :PEM Analysis of Temperature distribution in clutch and brake linings.9. Patents : --



12. No.of Books published with details : One,

Structured Cobol Programming

STAFF PROFILE

1. Name : R. THANGAVEL

2. Date of Birth :19.08.1957

3. Educational Qualification : M.E.



b. Research : --

c. Industry :2 years

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level : Engineering Mechanics, Vehicle Dynamics Mechanics of Machines, Simulation of IC Engines Post Graduate level : --



- Conferences : 028. Projects Carried out : --

9. Patents : --



12. No.of Books published with details : 01, Engineering Mechanics

CBH Publishers.

STAFF PROFILE

1. Name :C. LOGANATHAN

2. Date of Birth :12.04.1960



a. Teaching : 22 yrs

b. Research : --

c. Industry :1

d. Others : --

5. Area of Specializations : B.Tech.-Automobile Engineering


Ph.D - --

6. Subjects teaching at Under Graduate level : Automobile Engineering Subjects & Mechanical Engineering Subjects




- Conferences : -- Projects Carried out :

8. Patents : --



11. No.of Books published with details :

STAFF PROFILE

1. Name :R. VENKATACHALAM

2. Date of Birth :14.05.1964




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Mechanical Engineering


Ph.D –Alternate Fuels – (doing)

6. Subjects teaching at Under Graduate level : Automobile Engineering Subjects Mechanical Engineering Subjects

Post Graduate level :.



- Conferences :15 Projects Carried out :--

8. Patents : --




STAFF PROFILE

1. Name :P. SELVAKUMAR

2. Date of Birth :09.07.1962




b. Research : --

c. Industry : --

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level : Automobile Engineering Subjects

Post Graduate level : --




9. Patents : --




.

DEPARTMENT OF CIVIL ENGINEERINMG

STAFF PROFILE

10. Name :G.S.THIRUGNANAM

11. Date of Birth :15.07.1960

12. Educational Qualification : B.E., M.E., Ph.D.



b. Research : 4 years

c. Industry : --

d. Others : --

14. Area of Specializations : B.E -Civil Engineering

M.E –Structural Engineering

Ph.D –Civil Engineering

15. Subjects teaching at Under Graduate level : Design of RC Elements RC Structures, Applied Geology, Hydrology

Post Graduate level : Structural Dynamics, Theory of elasticity & plasticity Concrete Structures Steel Structures,


No. of papers published in Masters’s 5 - National Journals : 1Ph.D. - - International Journals : --

- Conferences : 50

17. Projects Carried out : TNSCST Students Project - 2

18. Patents : --




STAFF PROFILE

1. Name : Dr.R.MURUGESAN

2. Date of Birth : 25.05.1964

3. Educational Qualification : M.E., Ph.D.




c. Industry : --

d. Others : --


M.E –Transportation Engg. & Management

Ph.D –Transportation Engineering

3. Subjects teaching at Under Graduate level : Highway Engineering,

Irrigation Engineering Applied Hydraulics Engineering Mechanics of Fluids

Post Graduate level : Design of Bridges


No. of papers published in Masters’s: 5 - National Journals : 8Ph.D. : 4 - International Journals : 1

- Conferences : 205. Projects Carried out : 3 TNSCST Projects

6. Patents : --




STAFF PROFILE

1. Name :G. SRINIVASAN

2. Date of Birth :04.03.1957

3. Educational Qualification :B.E.(Hons),M.E.



b. Research : --

c. Industry :2 years

d. Others : --


M.E –Civil Engineering

Ph.D ---

6. Subjects teaching at Under Graduate level : Contruction Technology Foundation Engineering Soil Mechanics

Post Graduate level :Repair & Rehabilitation of Structures


No. of papers published in Masters’s:5 - National Journals : --Ph.D. :-- - International Journals : --

- Conferences :58. Projects Carried out : AICTE R&D Project on corrosion prevention in RCC Structural Elements 9. Patents : --




STAFF PROFILE

1. Name :P.PALANIVEL

2. Date of Birth :06.09.1953




b. Research : --

c. Industry : --

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level : Surveying

Estimating & Quantity Surveying Soil Mechanics Foundation Engineering

Post Graduate level : Design of Substructures7. Research guidance

No. of papers published in Masters’s - National Journals : --Ph.D. - International Journals : --


9. Patents : --




STAFF PROFILE

1. Name :P.SARAVANA KUMAR

2. Date of Birth :21.06.1978





c. Industry :1 year

d. Others : --


M.E –Computer Aided Structural Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Mechanics of Solids Basic Dynamics & Asbsimic Design Construction Materials Professional Ethics

Post Graduate level : Asbsimic Design of structures Computational Methods.



- Conferences :68. Projects Carried out : --

9. Patents : --




STAFF PROFILE

1. Name :G.M.GOWTHAMAKUMAR

2. Date of Birth :12.01.1970



a. Teaching :5

b. Research : --

c. Industry :5

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level :Structural Design Engg. Mechanics





9. Patents : --




STAFF PROFILE

1. Name :Dr.G. BASKAR

2. Date of Birth :17.03.1962

3. Educational Qualification :M.E.,M.B.A.,Ph.D.



b. Research :--

c. Industry :--

d. Others :--


M.E –Urban Engineering

MBA-Transport & Finance Managment.

Ph.D –Civil Engineering

6. Subjects teaching at Under Graduate level : Highway Engineering, Railway Engineering, Airports & Harbours Economics & Management Traffic Engineering



No. of papers published in Masters’s 2 - National Journals :1Ph.D. 2 - International Journals : --

- Conferences :13

8. Projects Carried out : 19. Patents : one




STAFF PROFILE

1. Name : N.R. CHITRA

2. Date of Birth :02.03.1965

3. Educational Qualification : B.E., M.E.

4. Work Experience


b. Research : --

c. Industry :--

d. Others : --



Ph.D - doing

6. Subjects teaching at Under Graduate level : Structural analysis Design of Reinforce concrete and brick Masonry structure Building services

Post Graduate level : Optimization in structural design7. Research guidance



9. Patents : --




DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING

STAFF PROFILE

5. Name : Dr. A. SARADHA

6. Date of Birth : 09.06.1967

7. Educational Qualification : B.E., M.E., Ph.D.

8. Work Experience



c. Industry : --

d. Others : --

9. Area of Specializations : B.E - Electronics & Comm Engineering

M.E – Computer Science & Engineering

Ph.D - Computer Science & Engineering

10. Subjects teaching at Under Information Security, Graduate level : Data structures and Algorithms

Software Engineering, Operating systems

Post Graduate level : Operating Systems, Software Quality Assurance

11. Research guidance : 6

No. of papers published in Masters’s - National Journals : NilPh.D. - International Journals : 2

- Conferences : 14Projects Carried out : --

12. Patents : --


10 .Research Publications : Face Recognition using transform

based and Neural Network features


STAFF PROFILE

1. Name : P.KALYANI

2. Date of Birth :19.07.1963

3. Educational Qualification : B.E., M.E.(Ph.D)

4. Work Experience

- Teaching : 22 Yrs

- Research : 2 Yrs

- Industry : --

- Others : --

5. Area of Specializations : B.E - ECE

M.E – CSE

Ph.D - CSE

6. Subjects teaching at Under Graduate level : DBMS, Graphics & Multimedia, Computer Networks

Post Graduate level : RDBMS, Computer Networks


No. of papers published in Masters’s - National Journals :--Ph.D. - International Journals :--


9. Patents : --




STAFF PROFILE

5. Name : R. SIVASUBRAMANIAM

6. Date of Birth : 06.05.1967

7. Educational Qualification : B.E. (CSE).



b. Research : --

c. Industry : --

d. Others : --

9. Area of Specializations : B.E - Computer Science and Engineering

M.E – Nil

Ph.D - Nil

10. Subjects teaching at Under Graduate level : Data Structures & Algorithms

Post Graduate level : Human Resource Management.



- Conferences : 412. Projects Carried out :

13. Patents :

14. Technology Transfer :

15. Research Publications :


STAFF PROFILE

1. Name : G.VENGATACHALAM

2. Date of Birth : 06.07.1966

3. Educational Qualification : M.E. Computer Science & Engg.

4. Work Experience : --


b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electronics and Communication Engineering

M.E –Computer Science and Engineering

Ph.D - --

6. Subjects teaching at UnderGraduate level : C and, Net Frame work, Visual Programming, Computer Networks.

Post Graduate level : Software Project Management



- Conferences : 7

8. Projects Carried out : --

9. Patents : --




STAFF PROFILE

1. Name :S. PALANISAMY

2. Date of Birth : 20.02.1967

3. Educational Qualification : B.E.., M.S, M.B.A., M.Tech.

4. Work Experience : --


b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E - Computer Science & Engg. - 1989

M..Tech – Computer Science & Engg. - 1998

Ph.D – Data Based Management System

6. Subjects teaching at Under Graduate level : DBMS, Computer Graphics, OOAD

Post Graduate level :OOAD, Computer Graphics

Research guidance


- Conferences : -- 2

7. Projects Carried out : --

8. Patents : --




STAFF PROFILE

1. Name : M. ANNAPOORANI

2. Date of Birth : 07.05.1972

3. Educational Qualification : B.E. – CSE, M.E. - CSE



b. Research :--

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Computer Science and Engineering


Ph.D - --

6. Subjects teaching at Under Graduate level : Advanced C Programming

Post Graduate level : Operating Systems




9. Patents : --




STAFF PROFILE

1. Name : M. MARIKKANNAN

2. Date of Birth : 09.04.1973

3. Educational Qualification : M.E. (CSE)




c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Computer Engineering

M.E –Computer Science and Engineering.

Ph.D* -Computer Science & Engg.(doing at Anna Unversity)

6. Subjects teaching at Under Graduate level : Computer Architecture, Design of Algorithms, Object Oriented Analysis & Design

Post Graduate level : Advanced DBMS, Software Engineering




9. Patents : --



12. No.of Books published with details :2(Question and Answer Type)

1. Fundamentals of Computing - CBH Publishers Pvt. Ltd.2. Data Structures

STAFF PROFILE

1. Name : N. MAGESH

2. Date of Birth : 12.07.1971

3. Educational Qualification : M.E.,



b. Research : --

c. Industry : --

d. Others : --



Ph.D – CSE - doining

6. Subjects teaching at Under Graduate level : Design and Analysis of Algorithm, Artificial Intelligence, UNIX Internals

Post Graduate level : Graphics and Multimedia

Research guidance



8. Patents : --




STAFF PROFILE

1. Name : A. KAVIDHA

2. Date of Birth : 12.06.1969

3. Educational Qualification : B.E. (CSE), M.E. (CSE)



b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E - CSE

M.E – CSE

Ph.D - --

6. Subjects teaching at Under Graduate level : Internet Programming, Advanced Java Programming.

Post Graduate level : XML and Web Services




9. Patents : --




STAFF PROFILE

1. Name : N. VASUKI

2. Date of Birth : 17.09.1979

3. Educational Qualification : B.E. (CSE), M.E. (CSE)



b. Research : --

c. Industry : --

d. Others : --


M.E – CSE

Ph.D - --

6. Subjects teaching at Under Graduate level : Computer Architecture, System Sortware,. Design & Anaylsis of Algorithms, Data Structures

Post Graduate level : Computer Networks & Software Engineering



- Conferences : --Projects Carried out : --

8. Patents : --




STAFF PROFILE

1. Name : S. KALAIVANI

2. Date of Birth : 29.05.1979

3. Educational Qualification : B.E. (CSE), M.E. (CSE) (Ph.D)


e. Teaching : 07 years

f. Research : 02 years

g. Industry : --

h. Others : --


M.E – CSE

Ph.D – Datamining in Information Security

6. Subjects teaching at Under Graduate level : Principles of Compiler Design Object Oriented Programming Cryprography & Network Security

Post Graduate level : Data Structures & System Software




8. Patents : --




DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERINGSTAFF PROFILE

1. Name : Dr. B.VISWANATHAN

2. Date of Birth : 03.10.1949

3. Age : 58

4. Educational : B.E., M.Sc. (Engg), Ph.D

Qualification

5. Work Experience

a. Teaching : 31.6 yrs


c. Industry : 1 year

d. Others : Nil

6. Area of Specializations : B.E., - Electrical

M.Sc.(Eng) – Power Systems

Ph.D - Electrical

Subjects teaching at

Under Graduate Level : U.G & P.G Level

Post Graduate Level



Masters’s - National Journals : 03

Ph.D. - International Journals : 09

- Conferences :

5. Projects Carried out : Transformer Life expectancy evaluation by simulation studies for Madhya Pradesh State Electricity Board.6. Patents : Nil

9 Technology Transfer : Nil


2. No. of Books Published with details : Nil

STAFF PROFILE

13. Name :Dr.R. ANITA

14. Date of Birth :11.06.1961

15. Educational Qualification :M.E., Ph.D.



b. Research :--

c. Industry :--

d. Others :--

17. Area of Specializations : B.E -Electrical & Electronics Engineering

M.E –Applied Electronics

Ph.D –Electric Drives and Control

18. Subjects teaching at Under Graduate level : Utilization of Electrical Energy Bio-Medical Instrumentation Microprocessors



No. of papers published in Masters’s - National Journals :02Ph.D. - International Journals :02

- Conferences :1620. Projects Carried out : DST Project in Wind mill

21. Patents :--




STAFF PROFILE

1. Name :R. VALARMATHI

2. Date of Birth :01.06.1964




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electronics and Communication Engg.


Ph.D - doing

6. Subjects teaching at Under Graduate level : Communication Engineering, Optical, Microwave communication, Principles of Management Total Quality Manaagement Electronics Circuits



No. of papers published in : Masters’s - National Journals :02Ph.D. - International Journals :--

- Conferences :02 Projects Carried out : 01

8. Patents : --



11. No.of Books published with details :--

STAFF PROFILE

1. Name :S. VIJAYAN

2. Date of Birth :17.01.1968

3. Educational Qualification :B.E., M.E.


a. Teaching :15 years 6 Months


c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electrical and Electronics Engineering

M.E –Power System

Ph.D –VLSI Design (doing)

6. Subjects teaching at Under Graduate level : Electrical Machines ,Solid State Drives Integrated Circuits



No. of papers published in Masters’s - National Journals : --Ph.D. - International Journals :05

- Conferences :04

Projects Carried out : Design and Implementation of Control Techniques for switched relevance drive8. Patents : --



11 No.of Books published with details : --

STAFF PROFILE

1. Name :M.MOHAMMADHA HUSSAINI

2. Date of Birth :27.06.1969




b. Research : --

c. Industry : --

d. Others : --


M.E –Power Systems

Ph.D - doing

6. Subjects teaching at Under Graduate level : Power System Operation & Control Power Quality, Solid State Relays, Electric Circuit, Electrical Machines

Post Graduate level :7. Research guidance


- Conferences : 02Projects Carried out :

8. Patents : --




STAFF PROFILE

1. Name :A. VETRIVEL

2. Date of Birth :25.07.1971




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electrical and Electronics Engg.


Ph.D –Power Quality (Doing)

6. Subjects teaching at Under Electrical Machines, Circuit Theory, Graduate level : Digital Electronics




- Conferences : 01 Projects Carried out :

8. Patents : --




STAFF PROFILE

1. Name :B. BABY PRIYA

2. Date of Birth :05.09.1973




b. Research : --

c. Industry : --

d. Others : --


M.E –Electrical Machine

Ph.D - doing

6. Subjects teaching at Under Graduate level : Electrical Machines, Power System

Analysis, Electric Circuits, Linear integrated circuits Design of electrical apparatus



- Conferences : 02 Projects Carried out :

8. Patents : --



11. No.of Books published with details : 2 Papers in National Conference

STAFF PROFILE

1. Name : Dr.N. RAJASEKAR

2. Date of Birth :25.09.1979

3. Educational Qualification :Ph.D



b. Research :

c. Industry :--

d. Others :--


M.E –Power Electronics and Drives

Ph.D –Power Electronics and Drives

6. Subjects teaching at Under Graduate level :Power Electronics, Total Quality Managements Fiber Optics & Laser Instruments



No. of papers published in Masters’s - National Journals :--Ph.D. - International Journals : 01


9. Patents : --


11. Research Publications :--


STAFF PROFILE

1. Name :S.DHANAPAL

2. Date of Birth :29.09.1979

3. Educational Qualification :B.E., M.Tech.


a. Teaching :5 years 8 months

b. Research : --

c. Industry : --

d. Others : --


M.E –Power Electronics

Ph.D - --

6. Subjects teaching at Under Graduate level :Power Electronics,Electric Drives & Controls, Electronic Drives & Circuits





9. Patents : --




STAFF PROFILE

1. Name :S. GOMATHI

2. Date of Birth :12.11.1975



a. Teaching : 6 Years 6 Months

b. Research : --

c. Industry : --

d. Others : --


M.E –Control Systems

Ph.D ---

6. Subjects teaching at Under Graduate level :Control Systems, Linear Integrated circuits, Digital Signal Processing & High Voltage Engg, Measurements & Instrumentation



- Conferences : Projects Carried out :

8. Patents : --




STAFF PROFILE

1. Name :K.TAMIL SELVAN

2. Date of Birth :13.06.1981




b. Research : --

c. Industry : --

d. Others : --


M.E –Process Control & Instrumentation

Ph.D ---

6. Subjects teaching at Under Graduate level : Basic Electrical & Electronics Engg., Basic Circuit Analysis Electro Magnetic Teheory

Post Graduate level : 7. Research guidance



9. Patents : --




STAFF PROFILE

1. Name :A. GOWTHAMAN

2. Date of Birth :10.03.1974




b. Research : --

c. Industry : --

d. Others : --


M.E – Applied Electronics

Ph.D ---

6. Subjects teaching at Under Graduate level : Electrical Machines, Field Theory Protection & Switch Gear




- Conferences : -- Projects Carried out : 4 Batches

8. Patents : --




STAFF PROFILE

1. Name :K. MURUGAN

2. Date of Birth :27.09.1977



e. Teaching :7 years 10 Months

f. Research : --

g. Industry : --

h. Others : --

5. Area of Specializations : B.E -Computer Science

M.E –Software Engineering

Ph.D ---

6. Subjects teaching at Under Graduate level : Computer Networks, Database Management Systems Data Structures & Algorithms Object Oriented Programming Software Engineering



- Conferences : -- Projects Carried out : --

8. Patents : --




DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERINGSTAFF PROFILE

25. Name :L.PETER STANLEY BEBINGTON

26. Date of Birth :29.06.1951

27. Educational Qualification :B.E.(ECE),M.Sc.(Engg.)(Communication Systems)



b. Research :--

c. Industry :--

d. Others :--


M.Sc., –Communication Systems.

Ph.D - --

30. Subjects teaching at Under Graduate level : Microprocessors & Microcontrollers Television and Video Engineering Computer Architecture




- Conferences : --Projects Carried out :

32. Patents : --

33. Technology Transfer : -- 34. Research Publications : --

35. No.of Books published: -- with details

STAFF PROFILE

1. Name :R. SHANMUGAM

2. Date of Birth :07.05.1956

3. Educational Qualification :M.E.(Applied Electronics)


a. Teaching :23 yrs

b. Research : --

c. Industry :7 yrs

d. Others : --

5. Area of Specializations : AMIE -Electronics and Communication


Ph.D - --

6. Subjects teaching at Under Graduate level : Electronics Circuit-I, Electronics Circuit – II Total Quality Management





9. Patents : --




STAFF PROFILE

1. Name :M. RAJA

2. Date of Birth :16.06.1966

3. Educational Qualification :M.E. (ECE)



b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electronics and Communication

M.E –Microwave and Optical Engineering

Ph.D ---

6. Subjects teaching at Under Graduate level : Digital Signal Processing Artificial Neural Networks Transmision lines & waveguide computer networks




- Conferences :--Projects Carried out : --

8. Patents : --




STAFF PROFILE

1. Name :G.BALASUBRAMANIAN

2. Date of Birth :02.05.1967




b. Research : --

c. Industry : --

d. Others : --



Ph.D ---

6. Subjects teaching at Under Graduate level :Digital Signal Processing Signals & Systems, Communication Systems





8. Patents : --




STAFF PROFILE

1. Name :A.CHILAMBU CHELVAN

2. Date of Birth :06.05.1967



a. Teaching : 18 yrs.

b. Research : --

c. Industry : 01 year

d. Others : --



Ph.D ---

6. Subjects teaching at Under Graduate level : Embedded System Microprocessor & Microcontroller Control Systems




- Conferences : -- Projects Carried out : --

8. Patents : --


10. Research Publications : 10 Papers


STAFF PROFILE

1. Name :S.BHARATHI

2. Date of Birth :27.07.1976

3. Educational Qualification :M.TECH.



b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electronics and Commn. Engg.

M.E –VLSI System

Ph.D - --

6. Subjects teaching at Under Graduate level :

Post Graduate level :Advanced Digital System Design




9. Patents : --




STAFF PROFILE

1. Name :A.GOWTHAMAN

2. Date of Birth :10.03.1974




b. Research : --

c. Industry : --

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level :Electrical Machines, Field Theory, Power

Post Graduate level :System.



- Conferences : --8. Projects Carried out :1

9. Patents : --




STAFF PROFILE

1. Name :R. SENTHILKUMAR

2. Date of Birth :24.04.1976

3. Educational Qualification :M.E. (Applied Electronics)



b. Research : --

c. Industry : --

d. Others : --


M.E –Applied Electronics Ph.D - --

6. Subjects teaching at Under Graduate level : EMF, OC, DSP, LIC, EC-II, EC-I Communication Theory, Analog & Digital Communication, Electronics & Microprocessors Microprocessor and its applications




- Conferences : 6 (5 National 1 International)Projects Carried out : --

8. Patents : --




STAFF PROFILE

1. Name : N. MADHAVI

2. Date of Birth :30.06.1974

3. Educational Qualification :B.E.(ECE),M. E4. Work Experience :


b. Research :--

c. Industry :--

d. Others :--


M.E., –Applied Electronics

Ph.D - --

6. Subjects teaching at Under Graduate level : Microprocessor & Applications Communication Theory Digital Image Processing





8. Patents : --



STAFF PROFILE

1. Name : P. KALIRAM

2. Date of Birth : 05.02.1979


e. Teaching : 11 years

f. Research :--

g. Industry :--

h. Others :--


M.E., – Communication Systems

Ph.D - --

6. Subjects teaching at Under Graduate level : Television & Video Engineering

Digital Communication Control Systems,

Basics of Electronics Engineering Post Graduate level :




8. Patents : --

9. Technology Transfer : -- 10. Research Publications :--


STAFF PROFILE

1. Name : P.K. KOWSALYA

2. Date of Birth : 07.06.1974


i. Teaching : 9 years

j. Research :--

k. Industry :--

l. Others :--


M.E., –Applied Electronics

Ph.D - --

6. Subjects teaching at Under Graduate level : Electron devices Measurement & Instrumentation Data Structures Total Quality Management





8. Patents : --



STAFF PROFILE

1. Name :S.K. FAIROZE BANU

2. Date of Birth :16.02.1974




b. Research : --

c. Industry : --

d. Others : --



Subjects teaching at Under

Graduate level :1. Microwave Engg 2. Electromagnetic Waves and Wave guides 3. Electronic circuits 4. Electronics Devices and circuits 5. Principles of Communication





8. Patents : --




DEPARTMENT OF INFORMATION TECHNOLOGY

STAFF PROFILE

1. Name : K.S. THIRUNAVUKKARSU

2. Date of Birth : 28.09.1954

3. Educational Qualification :B.E.(EeE),M. E (CSE)4. Work Experience :

m. Teaching : 23 years

n. Research :--

o. Industry : 06 years

p. Others :--

5. Area of Specializations : B.E - EEE

M.E., – CSE

Ph.D - --

6. Subjects teaching at Under Graduate level : Operating Systems Enterprice Resource Planning Programming Languages Software Quality Assurance





8. Patents : --



STAFF PROFILE

1. Name :R.PANDIAN*

2. Date of Birth :09.01.1959



a. Teaching :23 yrs

b. Research :3 yrs., 5 months

c. Industry :--

d. Others :--

5 Area of Specializations : B.E -Electrical & Electronics Engineering


Ph.D –Computer Science (Pursuing)

6. Subjects teaching at Under Graduate level :Digital Systems,Computer Architecture Post Graduate level :Microprocessors,Computer Architecture

7.Research guidance

No. of papers published in Masters’s - National Journals :--Ph.D. - International Journals :2


9. Patents : --

10 Technology Transfer : --


12. No. of Books published with details : --

* Deputed to Anna University, Trichy as Controller of Examinations

STAFF PROFILE

1. Name :P. BHUVANESWARI*

2. Date of Birth :22.11.1974



a. Teaching : 7 years Research : --

b. Industry :2 years

c. Others : --

5. Area of Specializations : B.E -Computer Science and Engg.

M.E –Computer Science and Engg.

Ph.D –Computer Science and Engg.

6. Subjects teaching at Under Graduate level : Computer Network, Cryptography and Network Security Professional ethics and Leaner value Graphicsand Multimedia Database Management System7. Post Graduate level :




10. Patents : --




* is on maternity leave

STAFF PROFILE

1. Name :K.G. MAHESWARI

2. Date of Birth :25.07.1978

3. Educational Qualification : B.E., M.TECH.



b. Research : --

c. Industry : --

d. Others : --



Ph.D - --

6. Subjects teaching at Under Graduate level : Database Management Systems, Object Advanced C Programming, Software Testing Network Programming & Management

Post Graduate level : --1



- Conferences :03Projects Carried out : --

8. Patents : --




STAFF PROFILE

1. Name :M.POONGOTHAI

2. Date of Birth :08.11.1977




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electronics and Comm. Engg.

M.E –Computer Science

Ph.D -

6. Subjects teaching at Under Graduate level : Digital Principle and System Design

Embedded Architecture Visual Programming Digital Signal Processing Information coding Techniques Database Management System Total Quality Management Post Graduate Level :7. Research guidance



9. Patents : --




STAFF PROFILE

1. Name :R. SATHYAVANI

2. Date of Birth :27.09.1977

3. Educational Qualification : B.E., M.TECH.


a. Teaching : 7 Years 5 Months

b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Computer Science

M.E –Advanced Computing

Ph.D - --

6. Subjects teaching at Under Graduate level : Graphics and Multimedia Environmental Science & Engg.,



- Conferences : --8. Projects Carried out : Human Resource Management

9. Patents : --




STAFF PROFILE

1. Name : R. ANUREKHA

2. Date of Birth : 06.06.1976

3. Educational Qualification: B.E.(EEE), M.E.(CSE)



b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E -Electrical & Electronics . Engg.

M.E –Computer Science and Engg.

Ph.D - Networking Security - doing

6. Subjects teaching at Under Graduate level : Computer Methods Embedded Systems Mobile Computing




9. Patents : --




STAFF PROFILE

1. Name :S. MOHANASUNDARAM

2. Date of Birth :04.02.1972

3. Educational Qualification : B.E. (CSE), M.TECH (CSE)


a. Teaching : 13 years 5 months

b. Research : --

c. Industry : --

d. Others : --


M.Tech –Computer Science and Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Object Oriented Programming, Microprocessors and Microcontrollers, User Interface Design Computer Architecture,





9. Patents : --




STAFF PROFILE

1. Name :M. SATHYAKALA

2. Date of Birth :07.10.1979

3. Educational Qualification : B.E., M.Tech.



b. Research : --

c. Industry : --

d. Others : --


M.E –Advanced Computing

Ph.D - --

6. Subjects teaching at Under Graduate level : Component Based Technology, System Software, Data Structure Computer Architecture, Fundamentals of Programming ComputerNetwork, Theory of Computation





9. Patents : --




STAFF PROFILE

1. Name : S. THILAGAVATHI

2. Date of Birth : 01.06.1966


4. Work Experience : 8 yrs.

a. Teaching : --

b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.E - Electronics & Communication Engg

M.E – Computer Science & Engg

Ph.D - --

6. Subjects teaching at Under Graduate level : Digital Signal Processing, Information coding techniques Telecommunication systems Digital Principles and System Design Principles of Communication

Component based Technology, Post Graduate level : --




9. Patents : --




STAFF PROFILE

1. Name : P. THANGAVEL

2. Date of Birth : 10.06.1974

3. Educational Qualification : BE (CSE) M.E.(CSE)

4. Work Experience

a. Teaching : 9 yrs 6 months

b. Research : --

c. Industry : 1 yr

d. Others : --

5. Area of Specializations : B.E - Computer Science & Engineering

M.E – Computer Science & Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Object Oriented Analysis & Design Information System Design Software Engineering



No. of papers published in Masters’s -09 - National Journals : --Ph.D. - International Journals : --


9. Patents : --




STAFF PROFILE

1. Name :B.V. PRAKASH

2. Date of Birth :04.03.1978

3. Educational Qualification : B.E(CSE) M.E (CSE)



b. Research :--

c. Industry : --

d. Others : --

5. Area of Specializations : B.E - Computer Science and Engineering

M.E – Computer Science and Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Data Structures

Professional Ethics Basics of Electronics Engineering Post Graduate level :



- Conferences :-- Projects Carried out :

8. Patents : --




DEPARTMENT OF MECHANICAL ENGINEERINGSTAFF PROFILE

1. Name :K. MAYILSAMY

2. Date of Birth :07.04.1960



a. Teaching :22 yrs 9 months

b. Research :5 yrs.

c. Industry :--

d. Others : --


M.E –Internal Combustion Engineering

Ph.D –Mechanical Engineering

6. Subjects teaching at Under Graduate level :Thermodynamics & Jet Heat and Mass Transfer Thermodynamics

Post Graduate level :Advanced Heat and Mass Transfer Advanced Internal Combustion Engineering


No. of papers published in Masters’s 6 - National Journals : 04Ph.D. 8 - International Journals : --

- Conferences :28

8. Projects Carried out :One AICTE Project

9. Patents : --


11. Research Publications : 32 12. No.of Books published with details :Heat Transfer-Theory and Problems, Pearson Education - 2006

STAFF PROFILE

1. Name :N.KANAGASABAPATHI

2. Date of Birth :26.04.1959




b. Research : --

c. Industry :1 year

d. Others : --


M.E –Engineering Design

Ph.D - doing

6. Subjects teaching at Under Graduate level :Design of Machine Elements, Design of Transmission Systems, Total Quality Management, Fluid Mechanics and Machinery

Post Graduate level :--



- Conferences :4

8. Projects Carried out :

9. Patents :--




STAFF PROFILE

1. Name :S.SELVI

2. Date of Birth :09.06.1964

3. Educational Qualification : B.E.(Mech),

M.E.(Prodn. Engg)




c. Industry : 1 year 3 months

d. Others :--


M.E –Production Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level :Mechatronics, Computer Aided Manufacturing Power Plant Engineering Environmental Science & Engineering




- Conferences :158. Projects Carried out :AICTE R&D Project

Rs. 5.00 lakhs9. Patents : --



12. No.of Books published with details :Structured Cobol Programming

STAFF PROFILE

1. Name :A. SENDHIL KUMAR

2. Date of Birth :07.06.1953

3. Educational Qualification : B.E.(Mech),

M.E.(Prod) MBA



b. Teaching (Polytechnic): 3 years

c. Industry :5 yrs.

d. Others : --


M.E –Production Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Applied hydraulics and Pneumatics Computer Integrated Manufacturing





9. Patents : --




STAFF PROFILE

1. Name :P. KUMARAVEL

2. Date of Birth :10.05.1961

3. Educational Qualification : B.E.(Hons), M.E.


a. Teaching :23 years6 months

b. Research : --

c. Industry :11/2 years

d. Others : --


M.E –Machine Tool Engineering

Ph.D - --

6. Subjects teaching at Under Graduate level : Engineering Mechanics, Design of Jigs, Fixtures and press tools, Engineering Economics and cost analysis




- Conferences :10 Projects Carried out :

8. Patents : --




STAFF PROFILE

1. Name :S.THARVES MOHIDEEN

2. Date of Birth :10.05.1964

3. Educational Qualification : M.E., PGDCA




c. Industry :--

d. Others : --


M.E –Refrigeration & Airconditioning

Ph.D - doing

6. Subjects teaching at Under Graduate level :Thermal Engineering, Thermodynamics, Refrigeration & A/C, Dynamics of Machines

Post Graduate level :Advanced Power Plant Engineering Refrigeration System Design



- Conferences : 088. Projects Carried out : Energy audit in dairy, paper and Sugar industries.9. Patents : --



12. No.of Books published with details :One, Engg. Mechanics, CBH

Publishers, Chennai.

STAFF PROFILE

1. Name :V. PERIASAMY

2. Date of Birth :20.03.1961




b. Research : --

c. Industry : --

d. Others : --


M.E –Industrial Engg.

Ph.D - --

6. Subjects teaching at Under Graduate level : Process planning and cost estimation Machine Tool Engineering





9. Patents : --




STAFF PROFILE

1. Name : Dr. K. BALAMURUGAN

2. Date of Birth : 04.06.1977

3. Educational Qualification : M.E., Ph.D.,

4. Work Experience


b. Research : 4 yrs

c. Industry : 1 yr

d. Others : --


M.E – Production Engineering

Ph.D – Mechanical Engineering

6. Subjects teaching at Under Graduate level : Finite Element Analysis Metrology & Managements



No. of papers published in Masters’s 2 - National Journals : 4Ph.D. 4 - International Journals : 8

- Conferences : 138. Projects Carried out : 1 (DST Sponsored R&D Project) ongoing in AU, CBE9. Patents : --




SCIENCE AND HUMANITIESMATHAMATICES STAFF PROFILE

22. Name :Dr.M.B.K. MOORTHY

23. Date of Birth :11.05.1958

24. Educational Qualification :M.Sc.,M.Phil.,Ph.D




c. Industry : --

d. Others : --

26. Area of Specializations : M.Sc. –Applied Mathematics

M.Phil–Applied Mathematics

Ph.D – Applied Mathematics/Heat Transfer

27. Subjects teaching at Under Graduate level : Engineering Mathematics – I, II & III Numerical Methods Prohability & Statistics

Post Graduate level : Applied Mathematics

28. Research guidance : 5 candidates doing Ph.D under my guidence



30. Patents : --



33. No.of Books published with details : 8

STAFF PROFILE

1. Name :R. MANGALAM

2. Date of Birth :17.09.1957

3. Educational Qualification : M.Sc., M.Phil



b. Research :--

c. Industry :--

d. Others :--

5. Area of Specializations : M.Sc.-Mathematics

M.Phil-Applied Mathematics

Ph.D - --

6. Subjects teaching at Under Graduate level :Engineering Mathematics I,II,III, IV Numerical Methods Discrete Mathematics Probability and Statistics Post Graduate level : Mathematical Foundations of Computer Science. Numerical and Statistical Methods




9. Patents : --




STAFF PROFILE

1. Name :N.SUBRAMANIAM

2. Date of Birth :02.06.1960

3. Educational Qualification : M.Sc., M.Phil.,B.Ed.



b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : M.Sc.-Mathematics


Ph.D - --

6. Subjects teaching at Under Graduate Level : Engineering Mathematics-I, II, III Discrete Mathematics Random Processes. Theory of Computation, Numerical Methods.

Post Graduate level: Mathematical Foundations of Computer Science, Discrete Structures



Masters’s - National Journals : --Ph.D. - International Journals : --


9. Patents : --



No.of Books published with details :7 books *

* 1. Engineering Mathematics – I, II & III 2. Complete Reference to Mathematics-II 3. Random Processes 4. Probability and Queueing Theory 5. Probability and Statistics 6. Discrete Mathematics 7. Mathematical Structures (B.Sc., CT/IT)

STAFF PROFILE

1. Name :U.KRISHNASAMY

2. Date of Birth :27.11.1957




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : M.Sc. - Statistics

M.Phil– Statistics

Ph.D - --

6. Subjects teaching at Under Graduate level : Engineering Mathematics, Probability and Queuing Theory, Random Process, Numerical Methods

Post Graduate level : Resource Management Techniques 7. Research guidance



9. Patents : --



12. No.of Books published with details : 07 (Engineering Mathematics)

STAFF PROFILE

1. Name :S.DURAISAMI

2. Date of Birth :07.03.1958

3. Educational Qualification : M.Sc., M.Phil. PGDOR



b. Research : --

c. Industry : 06 months

d. Others : --

5. Area of Specializations : B.Sc.-Mathematics

M.Sc.–Mathematics

M.Phil-Applied Mathematics

PG Dip.OR: Operations Research

6. Subjects teaching at Under Graduate level : B.E/B.Tech – Engineering Mathematics Papers

Post Graduate level: MCA-.Resource Management Technique




9. Patents : --




STAFF PROFILE

1. Name :K.S. PARTHIPAN

2. Date of Birth :10.03.1961

3. Educational Qualification : M.Sc (Appl.Sci),

M.Phil(App.Sci)


a. Teaching :23 yrs 8 months

b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : M.Sc.-Applied Mathematics


Ph.D - doing

6. Subjects teaching at Under Graduate level : Engineering Mathematics – I,II,III Numerical Methods Post Graduate level :




9. Patents : --




STAFF PROFILE

1. Name :S.KUMARESAN

2. Date of Birth :10.02.1961

3. Educational Qualification : M.Sc., M.Phil.


a. Teaching : 21 years 8 months

b. Research : --

c. Industry : 2 years 4 months

d. Others : --

5. Area of Specializations : M.Sc.-Applied Mathematics

M.Phil–Computer Science

Ph.D - --

6. Subjects teaching at Under Graduate level : Mathematics – I, II & III Probability & Statistics





9. Patents : --




PHYSICSSTAFF PROFILE

1. Name :K. KRISHNAN

2. Date of Birth :12.10.1957

3.Educational Qualification : M.Sc., M.Phil.

4.Work Experience :

b. Teaching :23 years 7 months

c. Research :--

d. Industry : --

e. Others : --

5.Area of Specializations : M.Sc.-Electronics

M.Phil–Thin Films

Ph.D - --

6.Subjects teaching at Under Graduate level : Engineering Physics, Applied Physics, Material Science.


7.Research guidance


- Conferences : --8.Projects Carried out : --

9.Patents : --

10.Technology Transfer : --

11.Research Publications : --

12 .No.of Books published with details : --

STAFF PROFILE

1. Name :M.DAKSHINAMOORTHY

2. Date of Birth :08.05.1962




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.Sc.-Applied Science

M.Sc.–Materials Science

M.Phil-Thin Films

Ph.D - Heat Transfer (Now pursuing)

6. Subjects teaching at Under Graduate level : Engineering Physics, Material Science. Physics Lab





9. Patents : --




STAFF PROFILE

1. Name :S.K.MUTHUKUMAR

2. Date of Birth :05.09.1962




b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.Sc.-Physics

M.Sc.–Electronics

M.Phil –Thin films

6. Subjects teaching at Under Graduate level : Engineering Physics, Applied Physics, Material Science.





9. Patents : --




CHEMISTRYSTAFF PROFILE

34. Name :Dr.K. PERIASAMY

35. Date of Birth :10.08.1953

36. Educational Qualification :M.Sc.,M.Phil.,Ph.D.


a. Teaching :29 yrs. 6 months


c. Industry :--

d. Others :--

38. Area of Specializations : B.Sc. -Chemistry

M.Sc.–Chemistry

Ph.D –Chemistry Interdisciplinary with Environmental Sciences.

39. Subjects teaching at Under Graduate level :B.E/B.Tech. Chemistry/ Envronmental Science Chemistry Lab.

Post Graduate level :--




42. Patents : --


44. Research Publications :15 Papers


STAFF PROFILE

1. Name :T. ATHMAJOTHI

2. Date of Birth :28.08.1959



a. Teaching :21 years 8 months.

b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : M.Sc.–Chemistry

M.Phil-Industrial Electro Chemistry

6. Subjects teaching at Under Graduate level :Engineering Chemistry, Environmental Science





9. Patents : --




STAFF PROFILE

1. Name :R.KARPOORA SUNDARAM

2. Date of Birth :21.03.1963

3. Educational Qualification : M.Sc.


a. Teaching : 21 yrs. 8 months

b. Research : --

c. Industry : --

d. Others : --

5. Area of Specializations : B.Sc. -Chemistry

M.Sc. –Chemistry

Ph.D - --

6. Subjects teaching at Under Graduate level : I B.E – Applied Chemistry Environmental Science & Engineering





9. Patents : --




STAFF PROFILE

1.Name :D. MATHIALAGAN

2.Date of Birth :19.08.1959

3.Educational Qualification :M.A.,M.Ed.,M.Phil.




c. Industry :--

d. Others :--

5. Area of Specializations : B.A - English

M.A. – English

M.Ed. – English

M.Phil - English

6. Subjects teaching at Under Graduate level : Technical English, Communication Skills, Communication Skills Lab. Post Graduate level : Communication Skills Lab.


No. of papers published in Masters’s - National Journals :4M.Phil:40 - International Journals :2

- Conferences :108. Projects Carried out :--

9. Patents :--

10. Technology Transfer :--


13. No.of Books published with details :6

a) English for Engineers, d) English Optional I for B.Ed., Studentsb) English for Engineers-I, e) English Optional II for B.Ed., Studentsc) English for Engineers-II, f) English for Engineers

ANNEXURE – VI

Curricula and syllabi for I year B.E programme as approved by the UniversityANNA UNIVERSITY :: COIMBATORE-13

ANNA UNIVERSITY : COIMBATORE – 13First Year B.E. / B.Tech. 2007 – 2008 batch

Non Circuit BranchesSl. No. I Semester Hours / week Marks *

L T P Sessional Exam. TotalTHEORY

1 Technical English 3 0 0 50 50 1002 Engineering Mathematics – I 4 1 0 50 50 1003 Applied Physics 4 0 0 50 50 1004 Applied Chemistry 4 0 0 50 50 1005 Fundamentals of Programming 3 0 0 50 50 1006 Basics of Electrical & Electronics Engg 4 0 0 50 50 100

PRACTICALS1 Applied Physics Laboratory 0 0 3 50 50 1002 Applied Chemistry Laboratory 0 0 3 50 50 1003 Programming Laboratory 0 0 3 50 50 1004 Engineering Practice 0 0 3 50 50 100

Circuit BranchesSl. No. I Semester Hours / week Marks *

L T P Sessional Exam. TotalTHEORY

1 Technical English 3 0 0 50 50 1002 Engineering Mathematics – I 4 1 0 50 50 1003 Applied Physics 4 0 0 50 50 1004 Applied Chemistry 4 0 0 50 50 1005 Fundamentals of Programming 3 0 0 50 50 1006 Basics of Civil & Mechanical Engg 4 0 0 50 50 100

PRACTICALS1 Applied Physics Laboratory 0 0 3 50 50 1002 Applied Chemistry Laboratory 0 0 3 50 50 1003 Programming Laboratory 0 0 3 50 50 1004 Engineering Practice 0 0 3 50 50 100

Passing Minimum Sessional – 25 Exam. – 25 Total - 50

CIRCUIT BRANCHES NON CIRCUIT BRANCHES

1 Electrical and Electronics Engineering Aeronautical Engineering

2 Electronics and Communication Engineering Automobile Engineering

3 Computer Science and Engineering Civil Engineering

4 Electronics and Instrumentation Engineering Mechanical Engineering

5 Instrumentation and Control Engineering Mechatronics Engineering

6 Information Technology Metallurgy Engineering

7 Bio-Medical Engineering Bio-Technology

8 Medical Electronics Marine Engineering

9 Chemical Engineering

10 Textile Technology

11 Textile Technology(Fashion Technology

12 Food Technology

13 Production Engineering

First Year B.E. / B.Tech. 2008– 2009batch

**Since Anna universiry,Coimbatore has revised the syllabus for 2008-09 batch and it is yet to announce the II-sem curriculum for all the branches ,it will be updated after the announcement.

ANNA UNIVERSITY: COIMBATORE- 641 013B.E - MECHANICAL ENGINEERING CURRICULUM

The syllabus for the above curriculum can be referred here.

http://www.annauniv.ac.in/academic/

http://www.annauniv.ac.in/academic

Curricula and syllabi for each of the programmes as approved by the UniversityANNA UNIVERSITY :: CHENNAI - 600 025

B.E. AUTOMOBILE ENGINEERING

SEMESTER - III

(Applicable to the students admitted from the Academic year 2006 – 2007 onwards)Code No. Course Title L T P M

THEORYMA1201 Mathematics – III 3 1 0 100ME1206 Applied Engineering Mechanics 3 1 0 100AT1201 Applied Thermodynamics 3 1 0 100ME1202 Fluid Mechanics and Machinery 3 1 0 100AT1202 Automotive Petrol Engines 3 0 0 100AT1203 Fuels and Lubricants 3 0 0 100

PRACTICALME1204 Fluid Mechanics and Machinery Lab 0 0 3 100AT1204 Fuels and Lubricants Lab 0 0 3 100AT1205 Two and Three Wheeler Lab 0 0 3 100GE1202 Technical Seminar** 0 0 3 0

SEMESTER – IV


THEORYMA1253 Probability and Statistics 3 1 0 100AT1251 Automotive Diesel Engines 3 0 0 100CE1262 Strength of Materials 3 1 0 100AT1252 Mechanics of Machines 3 1 0 100MH1151 Engineering Materials and Metallurgy 3 0 0 100EC1264 Electronics and Microprocessors 3 0 0 100

PRACTICALEC1265 Electronics and Microprocessors Lab 0 0 3 100AT1253 Engine Testing Lab 0 0 3 100AT1254 Computer Aided Machine Drawing 0 0 3 100GE1251 Technical Seminar** 0 0 3 0

SEMESTER - V

Code No. Course Title L T P MTHEORYGE1301 Professional Ethics and Human Values 3 0 0 100AT1301 Automotive Electrical and Electronics 3 0 0 100AT1302 Automotive Engines Components Design 3 1 0 100AT1303 Automotive Chassis 3 0 0 100

ME1304 Engineering Metrology and Measurements 3 0 0 100AT1304 Vehicle Dynamics 3 0 0 100PRACTICALAT1305 Auto Electrical and Electronics Lab 0 0 3 100AT1306 Automotive Chassis Components Lab 0 0 3 100AT1307 Computer Aided Engine Design Lab 0 0 3 100GE1302 Communication Skills and Technical Seminar** 0 0 3 0

SEMESTER - VI

Code No. Course Title L T P MTHEORYMG1351 Principles of Management 3 0 0 100AT1351 Automotive Chassis Design 3 1 0 100AT1352 Computer Aided Vehicle Design Characteristics 3 1 0 100AT1353 Automotive Pollution and Control 3 0 0 100AT1354 Automotive Transmission 3 0 0 100E1**** Elective – I 3 0 0 100PRACTICALAT1355 Reconditioning Lab 0 0 3 100AT1356 Automotive Engine Components Lab 0 0 3 100AT1357 Computer Aided Chassis Design Lab 0 0 3 100GE1351 Presentation Skills and Technical Seminar** 0 0 3 0

SEMESTER - VII

Code No. Course Title L T P MTHEORYMG1401 Total Quality Management 3 0 0 100MH1004 Finite Element Analysis 3 1 0 100AT1401 Vehicle Maintenance 3 0 0 100AT1402 Vehicle Body Engineering 3 1 0 100E2**** Elective – II 3 0 0 100E3**** Elective – III 3 0 0 100PRACTICALAT1403 Vehicle Maintenance Lab 0 0 3 100AT1404 Computer Aided Manufacturing Lab 0 0 3 100AT1405 Identification of Project Work of next Semester** 0 0 2 0

SEMESTER - VIII

Code No. Course Title L T P MTHEORY

MG1452 Engineering Economics and Cost Analysis 3 0 0 100E4**** Elective – IV 3 0 0 100E5**** Elective – V 3 0 0 100PRACTICALAT1452 Comprehension** 0 0 3 0AT1453 Project Work 0 0 6 200

ANNA UNIVERSITY :: CHENNAI 600 025

B.E. CIVIL ENGINEERINGSEMESTER III

(Applicable to the students admitted from the Academic year 2006 – 2007 onwards)


MA1201 Mathematics – III 3 1 0 100CY1201 Environmental Science and Engineering 3 0 0 100AG1201 Applied Geology 3 0 0 100CE1201 Mechanics of Solids 3 1 0 100CE1202 Mechanics of Fluids 3 1 0 100CE1203 Construction Techniques, Equipment and

Practice 4 0 0 100

CE1204 Surveying– I 3 0 0 100PRACTICALCE1205 Survey Practical – I 0 0 4 100CE1206 Computer Aided Building Drawing 0 0 4 100

SEMESTER IV(Applicable to the students admitted from the Academic year 2006 – 2007 onwards)


MA1251 Numerical Methods 3 1 0 100CE1251 Mechanics of Soils 3 0 0 100CE1252 Strength of Materials 3 1 0 100CE1253 Applied Hydraulic Engineering 3 1 0 100CE1254 Surveying – II 3 0 0 100CE1255 Highway Engineering 3 0 0 100PRACTICALCE1256 Strength of Materials Lab 0 0 3 100CE1257 Hydraulic Engineering Laboratory 0 0 3 100CE1258 Survey Practical – II 0 0 4 100GE1302 Communication Skills and Seminar ** 0 0 2 **

SEMESTER V

Code No. Course Title L T P MTHEORYGE1301 Professional Ethics and Human Values 3 0 0 100CE1301 Irrigation Engineering 4 0 0 100CE1302 Structural Analysis - Classical methods 3 1 0 100CE1303 Railways, Docks & Harbors and Airports 4 0 0 100CE1304 Environmental Engineering 3 0 0 100CE1305 Foundation Engineering 3 0 0 100PRACTICALCE1306 Environmental Engineering Laboratory 0 0 3 100CE1307 Soil Engineering Laboratory 0 0 3 100GE1302 Communication Skills and Technical Seminar ** 0 0 2 0

SEMESTER VI

Code No. Course Title L T P MTHEORYMG1351 Principles of Management 3 0 0 100CE1351 Structural Analysis - Modern methods 3 1 0 100CE1352 Design of Steel Structures 4 2 0 100CE1353 Construction Planning & Scheduling 3 0 0 100CE1354 Design of RC Elements 3 0 0 100

Elective – I 3 0 0 100PRACTICALCE1355 Irrigation Engineering Drawing 0 0 3 100CE1356 Environmental Engineering Drawing 0 0 3 100CE1357 Survey Camp - - - 100GE1351 Presentation Skills and Technical Seminar ** 0 0 3 0

SEMESTER VII

Code No. Course Title L T P MTHEORYMG1401 Total Quality Management 3 0 0 100CE1401 Design of RC and Reinforced Brick Masonry

Structures4 2 0 100

CE1402 Estimation and Quantity Surveying 3 0 0 100CE1403 Basics of Dynamics and Aseismic Design 3 0 0 100CE1404 Building Services 3 0 0 100

Elective - II 3 0 0 100PRACTICALCE1405 Computer Aided Design and Drafting Laboratory 0 0 4 100CE1406 Design Project 0 0 4 100

SEMESTER VIII

Code No. Course Title L T P MTHEORYCE1451 Engineering Economics and Cost Analysis 3 0 0 100

Elective - III 3 0 0 100

Elective - IV 3 0 0 100PRACTICALCode No. Course Title L T P MCE1452 Comprehension** 0 0 3 0CE1453 Project Work 0 0 6 200

** No Examination


B.E. COMPUTER SCIENCE AND ENGINEERING

SEMESTER III(Applicable to the students admitted from the Academic year 2006 – 2007 onwards)

Code No. Course Title L T P M

THEORYMA1201 Mathematics III 3 1 0 100CS1151 Data Structures 3 1 0 100CS1202 Digital Principles and Systems Design 3 1 0 100CS1203 System Software 3 0 0 100CS1204 Object Oriented Programming 3 0 0 100CY1201 Environmental Science and Engineering 3 0 0 100

PRACTICALCS1205 Object Oriented Programming Lab 0 0 3 100CS1206 Digital Lab 0 0 3 100CS1152 Data Structures Lab 0 0 3 100

SEMESTER IV


THEORYMA1252 Probability and Queuing Theory 3 1 0 100CS1201 Design and Analysis of Algorithms 3 1 0 100EC1291 Analog and Digital Communication 3 1 0 100CS1251 Computer Architecture 3 1 0 100CS1252 Operating Systems 3 0 0 100CS1253 Visual Programming 3 0 0 100

PRACTICALCS1207 System Software Lab 0 0 3 100CS1254 Operating Systems Lab 0 0 3 100CS1255 Visual Programming Lab 0 0 3 100

SEMESTER VCode No. Course Title L T P MTHEORYMG1351 Principles of Management 3 0 0 100MA1256 Discrete Mathematics 3 1 0 100CS1301 Database Management Systems 3 1 0 100CS1302 Computer Networks 3 0 0 100CS1303 Theory of Computation 3 1 0 100CS1304 Microprocessors & Micro controllers 3 1 0 100GE1302 Communication Skill & Seminar** 0 0 3 -PRACTICALCS1305 Network Lab 0 0 3 100CS1306 Microprocessors & Micro controllers Lab 0 0 3 100CS1307 DBMS Lab 0 0 3 100

SEMESTER VI


THEORYCS1351 Artificial Intelligence 3 0 0 100CS1352 Principles of Compiler Design 3 1 0 100CS1353 Software Engineering 3 0 0 100CS1354 Graphics and Multimedia 3 0 0 100MA1251 Numerical Methods 3 1 0 100

Elective – I 3 0 0 100GE1351 Presentation Skill & Seminar** 0 0 3 -PRACTICALCS1355 Graphics and Multimedia Lab 0 0 3 100CS1356 Compiler Design Lab 0 0 3 100

SEMESTER VIICode No. Course Title L T P MTHEORYMG1401 Total Quality Management 3 0 0 100CS1401 Internet Programming 3 0 0 100CS1402 Object Oriented Analysis and Design 3 1 0 100IT1252 Digital Signal Processing 3 1 0 100

Elective II 3 0 0 100Elective III 3 0 0 100

PRACTICALCS1403 Case Tools Lab 0 0 3 100CS1404 Internet Programming Lab 0 0 3 100

SEMESTER VIIICode No. Course Title L T P MTHEORYIT1402 Mobile Computing 3 0 0 100

Elective IV 3 0 0 100Elective V 3 0 0 100

PRACTICALCS1451 Project Work 0 0 12 200CS1452 Comprehension** 0 0 2 -


B.E. ELECTRONICS AND COMMUNICATION ENGINEERING



THEORYMA1201 Mathematics III 3 1 0 100EE1211 Electrical Machines 3 0 0 100CS1151 Data Structures 3 1 0 100EC1201 Digital Electronics 3 1 0 100CY1201 Environmental Science and Engineering 3 0 0 100EC1203 Electronic Circuits- I 3 1 0 100PRACTICALEE1261 Electrical Machines Lab 0 0 3 100EC1204 Electronic Devices and Circuits Lab I 0 0 3 100CS1152 Data structure Lab 0 0 3 100



THEORYMA1254 Random Processes 3 1 0 100EC1251 Electronic Circuits II 3 1 0 100EC1252 Signals and Systems 3 1 0 100EC1253 Electromagnetic Fields 3 1 0 100EC1254 Linear Integrated Circuits 3 0 0 100EC1255 Measurements and Instrumentation 3 0 0 100PRACTICALEC1256 Electronics circuits II and simulation lab 0 0 3 100EC1257 Linear Integrated Circuit Lab 0 0 3 100EC1258 Digital Electronics lab 0 0 3 100

SEMESTER V

Code No. Course Title L T P MTHEORYGE1301 Professional Ethics and Human Values 3 0 0 100EC1301 Communication Theory 3 1 0 100EC1302 Digital Signal Processing 3 1 0 100EC1303 Microprocessors and Its Applications 3 0 0 100EC1304 Control Systems 3 1 0 100EC1305 Transmission Lines and Waveguides 3 1 0 100GE1302 Communication skills and Seminar** 0 0 3 -PRACTICALEC1306 Digital Signal Processing Lab 0 0 3 100EC1307 Microprocessor and Application Lab 0 0 3 100

SEMESTER VI

Code No. Course Title L T P MTHEORYMG1351 Principles of Management 3 0 0 100EC1351 Digital Communication 3 1 0 100

CS1302 Computer Networks 3 0 0 100EC1352 Antenna and Wave Propagation 3 1 0 100CS1251 Computer Architecture 3 0 0 100MA1251 Numerical Methods 3 1 0 100GE1351 Professional Skill and Seminar** 0 0 3 -PRACTICALEC1353 Communication System Lab 0 0 3 100EC1354 Networks Lab 0 0 3 100EC1355 Electronic System Design Lab 0 0 3 100

SEMESTER VII

Code No. Course Title L T P MTHEORYMG1401 Total Quality Management 3 0 0 100EC1401 VLSI Design 3 0 0 100EC1402 Optical Communication 3 0 0 100EC1403 Microwave Engineering 3 0 0 100

Elective I 3 0 0 100Elective II 3 0 0 100

PRACTICALEC1404 VLSI Lab 0 0 3 100EC1405 Optical & Microwave Lab 0 0 3 100

SEMESTER VIII

Code No. Course Title L T P MTHEORYEC1451 Mobile Communication 3 0 0 100

Elective III 3 0 0 100Elective IV 3 0 0 100

PRACTICALEC1452 Project Work 0 0 12 200EC1453 Comprehension** 0 0 2 -

** No Examinations


B.E. ELECTRICAL AND ELECTRONICS ENGINEERING

SEMESTER III (Applicable to the students admitted from the Academic year 2006 – 2007 onwards)

THEORY L T P M

1. MA 1201 Mathematics – III 3 1 0 1002. CY 1201 Environmental Science and Engineering 3 0 0 1003. EE 1201 Electromagnetic Theory 3 1 0 1004. EE 1202 Electrical Machines – I 3 1 0 1005. EC 1211 Electronic Devices 3 0 0 1006. CS 1211 Data Structures and Algorithms 3 1 0 100

PRACTICAL

1. EE 1203 Electrical Machines Laboratory – I 0 0 3 1002. CS 1212 Data Structures and Algorithms

Laboratory

0 0 3 100

3 EE 1152 Electric Circuits lab 0 0 3 100

SEMESTER IV ( Applicable to the students admitted from the Academic year 2006 – 2007 onwards)THEORY L T P M

1. MA 1251 Numerical Methods 3 1 0 1002. EE 1251 Electrical Machines – II 3 1 0 1003. EE 1252 Transmission & Distribution 3 1 0 1004. IC 1251 Control Systems 3 1 0 1005. EC 1261 Electronic Circuits 3 0 0 1006. ME 1211 Applied Thermodynamics 3 1 0 100

PRACTICAL

1. IC 1252 Control Systems Laboratory 0 0 3 1002. EC 1262 Electronic Devices and Circuits Laboratory 0 0 3 1003. EE 1304 Electrical Machines Laboratory – II 0 0 3 100

SEMESTER V

THEORY

1. EE 1301 POWER ELECTRONICS 3 0 0 1002. EE 1302 Protection & Switchgear 3 0 0 1003. EC 1311 COMMUNICATION ENGINEERING 3 0 0 1004. EC 1312 Digital Logic Circuits 3 1 0 1005. EC 1313 LINEAR INTEGRATED CIRCUITS 3 0 0 1006. GE 1301 PROFESSIONAL ETHICS & HUMAN

VALUES 3 0 0 100

PRACTICAL

1. EE 1303 Power Electronics Laboratory 0 0 3 1002. EE 1304 Electrical Machines Laboratory – II 0 0 3 1003. EC 1314 Integrated Circuits Laboratory 0 0 3 1004. GE 1302 Communication Skills and Technical

Seminar ** No Examination

0 0 2 **

SEMESTER VITHEORY

1. EE 1351 Solid State Drives 3 0 0 1002. EE 1352 Power System Analysis 3 1 0 1003. EI 1361 Measurements & Instrumentation 3 0 0 1004. EC 1361 Digital Signal Processing 3 1 0 1005. EC 1362 Microprocessor & Microcontroller 3 1 0 1006. MG 1351 Principles of Management 3 0 0 100

PRACTICAL

1. EI 1362 Measurements & Instrumentation Laboratory

0 0 3 100

2. EC 1363 Microprocessor & Micro controller Laboratory

0 0 3 100

3. GE 1351 Presentation Skills and Technical Seminar 0 0 2 **

SEMESTER VIITHEORY

1. EE 1401 Power System Operation and Control 3 1 0 1002. EE 1402 High Voltage Engineering 3 0 0 1003. EE 1403 Design of Electrical Apparatus 3 1 0 1004. MG 1401 Total Quality Management 3 0 0 1005. Elective – I 3 0 0 1006. Elective – II 3 0 0 100

PRACTICAL

1. EE 1404 Power System Simulation Laboratory 0 0 3 100

SEMESTER VIII

THEORY

1. EE 1451 Electric Energy Generation, Utilization and Conservation

3 0 0 100

2. Elective – III 3 0 0 1003. Elective – IV 3 0 0 100

PRACTICAL

1. EE 1452 Project 0 0 12 2002. EE 1453 Comprehension 0 0 2 **

** No Examination.

B.E ELECTRICAL AND ELECTRONICS ENGINEERING

LIST OF ELECTIVES

ELECTIVE I

Sl.No Code No. Course Title L T P M

1. EI 1001 Fibre Optics and Laser Instruments 3 0 0 100

2. CS 1031 Visual Languages and Applications 3 1 0 100

3. IC 1031 Advanced Control System 3 0 0 100

4. EC 1031 Tele Communication Switching and Networks

3 0 0 100

5. EE 1001 Special Electrical Machines 3 0 0 100

ELECTIVE IISl.No Code No. Course Title L T P M

6. EI 1351 Bio-Medical Instrumentation 3 0 0 100

7. CS 1032 Artificial Intelligence and Expert Systems 3 0 0 100

8. CS 1033 Data Communication and Networks 3 0 0 100

9. EE 1002 Power System Dynamics 3 0 0 100

10. CS 1034 Computer Architecture 3 1 0 100

ELECTIVE IIISl.No Code No. Course Title L T P M

11. CS 1035 Operating Systems 3 1 0 100

12. EE 1003 Power System Transients 3 0 0 100

13. CS 1036 Internetworking Technology 3 0 0 100

14. EC 1032 Embedded System Design 3 0 0 100

15. EC 1033 Mobile Communication 3 0 0 100

ELECTIVE IVSl.No Code No. Course Title L T P M

16. EE 1004 Power Quality 3 0 0 100

17. IC 1002 Adaptive Control 3 0 0 100

18. EE 1006 Operation Research 3 0 0 100

19. EC 1461 VLSI Design 3 0 0 100

20. IC 1403 Neural Network and Fuzzy Logic Control 3 0 0 100


B.TECH. INFORMATION TECHNOLOGY



THEORYMA1201 Mathematics III 3 1 0 100IT1201 Signals and Systems 3 1 0 100CS1202 Digital Principles and Systems Design 3 1 0 100CS1151 Data Structures 3 1 0 100IT1202 Principles of Communication 3 1 0 100CS1204 Object Oriented Programming 3 0 0 100

PRACTICALCS1205 Object Oriented Programming Lab 0 0 3 100CS1206 Digital Lab 0 0 3 100CS1152 Data Structures Lab 0 0 3 100



THEORYMA1259 Probability and Statistics 3 1 0 100CS1353 Software Engineering 3 0 0 100IT1251 Information Coding Techniques 3 0 0 100CS1251 Computer Architecture 3 1 0 100IT1252 Digital Signal Processing 3 1 0 100CS1304 Microprocessors and Microcontrollers 3 1 0 100

PRACTICALIT1253 Software Engineering Lab 0 0 3 100IT1254 DSP and Communications Systems Lab 0 0 3 100CS1306 Microprocessors and Microcontrollers Lab 0 0 3 100

SEMESTER VCode No. Course Title L T P MTHEORYGE1301 Professional Ethics and Human Values 3 0 0 100

CS1402 Object Oriented Analysis and Design 3 1 0 100CS1252 Operating Systems 3 0 0 100CS1302 Computer Networks 3 0 0 100EC1391 Telecommunication Systems 3 0 0 100CS1301 Database Management Systems 3 1 0 100GE1302 Communication Skill & Seminar** 0 0 3 -PRACTICALCS1403 Case Tools Lab 0 0 3 100CS1254 Operating System Lab (Linux based) 0 0 3 100CS1307 DBMS Lab 0 0 3 100

SEMESTER VI

Code No. Course Title L T P MTHEORYMG1351 Principle of Management 3 0 0 100IT1351 Network Programming and Management 3 0 0 100IT1352 Cryptography and Network Security 3 1 0 100CS1253 Visual Programming 3 0 0 100IT1353 Embedded Systems 3 0 0 100MA1251 Numerical Methods 3 1 0 100GE1351 Professional Skill & Seminar** 0 0 3 -PRACTICALCS1255 Visual Programming Lab 0 0 3 100CS1305 Network Lab 0 0 3 100

SEMESTER VII

Code No. Course Title L T P MTHEORYMG1401 Total Quality Management 3 0 0 100IT1401 Component Based Technology 3 0 0 100IT1402 Mobile Computing 3 0 0 100CS1354 Graphics and Multimedia 3 0 0 100

Elective I 3 0 0 100Elective II 3 0 0 100

PRACTICALIT1403 Software Components Lab 0 0 3 100CS1355 Graphics and Multimedia Lab 0 0 3 100

SEMESTER VIIICode No. Course Title L T P MTHEORYIT1451 Web Technology 3 1 0 100

Elective III 3 0 0 100Elective IV 3 0 0 100

PRACTICALIT1452 Project Work 0 0 12 200IT1453 Comprehension** 0 0 2 -

ANNA UNIVERSITY:: CHENNAI 600 025B.E. MECHANICAL ENGINEERING

SEMESTER - III( Applicable to the students admitted from the Academic year 2006 – 2007 onwards) Code No. Course Title L T P M

THEORYMA1201 Mathematics – III 3 1 0 100ME1206 APPLIED ENGINEERING MECHANICS 3 1 0 100ME1201 Engineering Thermodynamics 3 1 0 100ME1202 Fluid Mechanics and Machinery 3 1 0 100EE1213 Electrical Drives and Controls 3 0 0 100ME1203 Manufacturing Technology – II 3 0 0 100

PRACTICALME1204 Fluid Mechanics and Machinery Lab 0 0 3 100EE1214 Electrical Engineering Lab 0 0 3 100ME1205 Manufacturing Technology Lab II 0 0 3 100GE1202 Technical Seminar** 0 0 3 0

SEMESTER - IV( Applicable to the students admitted from the Academic year 2006 – 2007 onwards) Code No. Course Title L T P M

THEORYMA1253 Probability and Statistics 3 1 0 100ME1251 Thermal Engineering 3 1 0 100CE1262 Strength of Materials 3 1 0 100ME1252 Kinematics of Machinery 3 1 0 100MH1151 Engineering Materials and Metallurgy 3 0 0 100EC1264 Electronics and Microprocessors 3 0 0 100

PRACTICALCE1263 Strength of Materials Lab 0 0 3 100EC1265 Electronics and Microprocessors Lab 0 0 3 100ME1254 Thermal Engineering Lab – I 0 0 3 100GE1251 Technical Seminar** 0 0 3 0

SEMESTER - V


THEORYGE1301 Professional Ethics and Human Values 3 0 0 100ME1301 Dynamics of Machinery 3 1 0 100ME1302 Design of Machine Elements 3 1 0 100ME1303 Gas Dynamics and Jet Propulsion 3 1 0 100ME1304 Engineering Metrology and Measurements 3 0 0 100ME1305 Applied Hydraulics and Pneumatics 3 0 0 100

PRACTICALME1306 Dynamics Lab 0 0 3 100ME1307 Metrology and Measurements Lab 0 0 3 100

ME1308 Computer Aided Machine Drawing Practice 0 0 3 100GE1302 Communication Skills and Technical Seminars** 0 0 3 0

SEMESTER - VICode No. Course Title L T P M

THEORYMG1351 Principles of Management 3 0 0 100ME1351 Heat and Mass Transfer 3 1 0 100ME1352 Design of Transmission Systems 3 2 0 100ME1353 Automobile Engineering 3 0 0 100ME1354 Power Plant Engineering 3 0 0 100

Elective – I 3 0 0 100PRACTICAL

ME1355 Thermal Engineering Lab – II 0 0 3 100ME1356 CAD / CAM Lab 0 0 3 100ME1357 Design and Fabrication Project 0 0 4 100GE1351 Presentation Skills and Technical Seminar** 0 0 3 0

SEMESTER - VIICode No. Course Title L T P M

THEORYMG1401 Total Quality Management 3 0 0 100ME1401 Finite Element Analysis 3 1 0 100ME1402 Mechatronics 3 0 0 100ME1403 Computer Integrated Manufacturing 3 0 0 100

Elective – II 3 0 0 100Elective – III 3 0 0 100

PRACTICALME1404 Computer Aided Simulation and Analysis Lab 0 0 3 100ME1405 Mechatronics Lab 0 0 3 100ME1406 Identification of Project Work for next Semester** 0 0 2 0

SEMESTER - VIIICode No. Course Title L T P M

THEORYMG1451 Engineering Economics and Cost Analysis 3 0 0 100

Elective – IV 3 0 0 100Elective – V 3 0 0 100

PRACTICALME1451 Comprehension- No Examinations 0 0 3 0ME1452 Project Work 0 0 6 200


CURRICULUM 2005 – FULL TIME MODE

M.E. STRUCTURAL ENGINEERING

SEMESTER – ICode No. Course Title L T P M

THEORY MA1602 Applied Mathematics 3 1 0 100ST1601 Experimental Methods and Model Analysis 3 0 0 100ST1602 Structural Dynamics 3 1 0 100ST1603 Constitutive Models and Modes of Failure 3 1 0 100E1*** Elective I 3 0 0 100E2*** Elective II 3 0 0 100

SEMESTER – IICode No. Course Title L T P M

THEORYST1651 Concrete Structures 3 0 0 100ST1652 Design of Substructures 3 0 0 100ST1653 Steel Structures 3 0 0 100ST1654 Computational Methods 3 1 0 100E3*** Elective III 3 0 0 100E4*** Elective IV 3 0 0 100

PracticalST1655 Structural Engineering Laboratory 0 0 3 100

SEMESTER – IIICode No. Course Title L T P M

THEORY E5*** Elective V 3 0 0 100E6*** Elective VI 3 0 0 100E7*** Elective VII 3 0 0 100

PracticalST1715 Practical Training (4 weeks in previous summer) 0 0 0 100ST1720 Seminar 0 0 2 100ST1751 Project Work – Phase I 0 0 12 *

SEMESTER – IVCode No. Course Title L T P M

PRACTICALST1751 Project Work – Phase II 0 0 24 *

* As per the Regulations 2005

LIST OF ELECTIVES FOR M.E. STRUCTURAL ENGINEERING

Course Code Course Title L T P MST1621 Soil Structure Interaction 3 0 0 100ST1622 Aseismic Design of Structures 3 0 0 100ST1623 CAAD for Structures 3 1 0 100ST1624 Design of Bridges 3 0 0 100

ST1625 Design of Plates, Shells and Spatial Structures 3 0 0 100ST1626 Design of Steel Concrete Composite Structures 3 0 0 100ST1627 Design of Structures for Dynamic Loads 3 0 0 100ST1628 Design of Tall Buildings 3 0 0 100ST1629 Industrial Structures 3 0 0 100ST1630 Maintenance and Rehabilitation of Structures 3 0 0 100ST1631 Optimization in Structural Design 3 0 0 100ST1632 Prestressed Concrete 3 0 0 100ST1633 Stability of Structures 3 0 0 100ST1634 Wind and Cyclone effects on Structures 3 0 0 100

The syllabus for the above curriculum can be referred here.

http://www.annauniv.edu/academic

http://www.annauniv.edu/academic

Annexure-VII

ANNA UNIVERSITY CHENNAI : : CHENNAI – 600 025 ACADEMIC SCHEDULE

ACADEMIC YEAR – 2008 -2009 REVISED ACADEMIC SCHEDULE FOR UG & PG PROGRAMMES OFFERED AT

ENGINEERING COLLEGES AFFILIATED TO ANNA UNIVERSITY CHENNAI

Sl. No. Programme Semester /

Year Reopening

Day

Last working day

Date of Commencement

of University Examination

1. B.E. / B.Tech. III,V, VII 25.06.2008 31.10.2008 06.11.2008 2. B.Arch. V, VII IX 25.06.2008 31.10.2008 06.11.2008

3. B.E. / B.Tech. (Part – time)

II, IV, VI 25.06.2008 31.10.2008 06.11.2008

4. M.Sc. (2 years) / M.Sc. (5 years)

V, VII, IX 25.06.2008 31.10.2008 06.11.2008

5. M.C.A. V 25.06.2008 31.10.2008 06.11.2008 6. B.Arch. III 01.07.2008 31.10.2008 06.11.2008

7. M.Sc. (2 years) / M.Sc. (5 years)

III 01.07.2008 31.10.2008 06.11.2008

8. M.E. / M.Tech. III 01.07.2008 31.10.2008 06.11.2008 9. M.C.A. III 01.07.2008 31.10.2008 06.11.2008 10. M.B.A. III 06.08.2008 15.11.2008 19.11.2009

REOPENING DAY FOR NEXT SEMESTER 16.12.2008

Note: 1. Theory and Practical Examination schedule to be published by the Controller of

Examinations, Anna University Chennai should be followed. (Practical examinations will be conducted in October 2008 before the theory examinations) 2. 450 periods for UG (Full-Time) & 350 periods for PG (Full-Time) shall be conducted within the above schedule of working days for completing the course work for that particular semester.

DIRECTOR (AC)

ANNA UNIVERSITY : COIMBATOREACADEMIC SCHEDULE (ODD SEMESTER)

Semester : UG & PG (JULY 2008 – DECEMBER 2008)

S. No.

Particulars Affiliated Colleges ofAnna University Coimbatore

Remarks

Four Year B.E. / B.Tech / B.Arch., /MCA / M.E. / M.Tech., / B.Sc / M.Sc. / B.C.A.

1. Commencement of Classes (III Semester)

07.07.2008 ----

2. Test -1 04.08.2008 to 09.08.2008 Entry of Test Marks on EMSSchedule will bepromolgated

3. Test -2 08.09.2008 to 13.09.20084. Test -3 13.10.2008 to 18.10.2008

5. Arrear Examinations (I & II Semester)

18.08.2008 to 25.08.2008

6. Registration of students on ExaminationManagement System (EMS)

25.08.2008 to 28.08.2008 In Exam. Data Centre

7. On line registration of DOTE approvedcandidates for Examination

20.10.2008 to 24.10.2008 Lateral Entry Students

8. Last working day 21.11.2008 ----

9. Last date for submission of attendance

21.11.2008, 4.00 PM ----

10. Last Date for payment of Exam. Fee &Issue of Hall Tickets

22.11.2008 ----

11. Commencement of Practical Exam.

Slot - 1 : 24.11.2008 to 29.11.2008Slot - 2 : 01.12.2008 to 06.12.2008

Study Holidays Period from22.11.2008 to 09.12.2008

12. Commencement of Theory Exam.(III Semester)

10.12.2008 ----

13. Date of Reopening (Fourth Semester)

05.01.2009 ----

14. Pongal Holidays 12.01.2009 to18.01.2009 ----

Annexure – VIIIAcademic Time Table

INSTITUTE OF ROAD AND TRANSPORT TECHNOLOGY:: ERODE – 638 316INSTITUTE OF ROAD AND TRANSPORT TECHNOLOGY : : ERODE. ACADEMIC CALENDER FOR V & VII SEMESTER U.G & P.G DEGREE (2008-2009)

Jun-08 Jul-08 Aug-08 Sep-08 Oct-08

DA

TE

DA

Y

PARTICULARS NO. OF WORK DAYS D

ATE

DA

Y


ATE

DA

Y PARTICULARS

NO. OF WORK DAYS D

ATE

DA

Y


ATE

DA

Y PARTICULARS

NO. OF

WORK

DAYS

23 MON 1 1 TUE 7 1 FRI 30 1 MO

N 50 1 WED RAMZAN XX

24 TUE 2 2 WED 8 2 SAT HOLIDAY XX 2 TUE 51 2 THU GANDHI JAYANTHI XX

25 WED 3 3 THU 9 3 SUN HOLIDAY XX 3 WED VINAYAKA CHATHURTHI XX 3 FRI 71

26 THU 4 4 FRI 10 4 MON 31 4 THU 52 4 SAT HOLIDAY XX

27 FRI 5 5 SAT HOLIDAY XX 5 TUE 32 5 FRI 53 5 SUN HOLIDAY XX

28 SAT HOLIDAY XX 6 SUN HOLIDAY XX 6 WED 33 6 SAT HOLIDAY XX 6 MON 72

29 SUN HOLIDAY XX 7 MON 11 7 THU 34 7 SUN HOLIDAY XX 7 TUE 73

30 MON 6 8 TUE 12 8 FRI 35 8 MO

N 54 8 WED AYUTHA POOJA XX

9 WED 13 9 SAT HOLIDAY XX 9 TUE 55 9 THU VIJAYADASAMI XX

PERIODIC TEST - I PORTION : 2 UNITS 10 THU 14 10 SUN HOLIDAY XX 10 WED 56 10 FRI 74

11 FRI 15 11 MON 36 11 THU 57 11 SAT HOLIDAY XX

PERIODIC TEST - 2 PORTION : 2 UNITS 12 SAT HOLIDAY XX 12 TUE 37 12 FRI 58 12 SUN HOLIDAY XX

13 SUN HOLIDAY XX 13 WED 38 13 SAT HOLIDAY XX 13 MON 75

MODEL TEST : FULL PORTION 14 MON 16 14 THU 39 14 SUN HOLIDAY XX 14 TUE 76

155

15 TUE 17 15 FRI INDEPENDENCE DAY XX 15 MO

NPERIODIC TEST - 2

BEGINS 59 15 WED 77

HEADS OF THE DEPARTMENTS ARE REQUESTED TO SCHEDULE THEIR

DEPARTMENT FUNCTIONS / PROGRAMMES OTHER THAN THE

TEST DURATION

16 WED 18 16 SAT HOLIDAY XX 16 TUE 60 16 THU 7817 THU 19 17 SUN HOLIDAY XX 17 WED 61 17 FRI 79

18 FRI 20 18 MON 40 18 THU 62 18 SAT HOLIDAY XX

19 SAT HOLIDAY XX 19 TUE 41 19 FRI 63 19 SUN HOLIDAY XX

20 SUN HOLIDAY XX 20 WED 42 20 SAT HOLIDAY XX 20 MON

MODEL TEST BEGINS 80

TENTATIVE EXAM SCHEDULE 21 MON 21 21 THU 43 21 SUN HOLIDAY XX 21 TUE 81

Practical exam 28.10.08 to 01.11.08 22 TUE 22 22 FRI 44 22 MON 64 22 WED 82

Therory Exam : 12.11.2008 23 WED 23 23 SAT HOLIDAY XX 23 TUE 65 23 THU 83 24 THU 24 24 SUN HOLIDAY XX 24 WED 66 24 FRI 84

Nov-08 25 FRI 25 25 MON 45 25 THU 67 25 SAT HOLIDAY XX

1 SAT HOLIDAY XX 26 SAT HOLIDAY XX 26 TUE 46 26 FRI 68 26 SUN HOLIDAY XX

2 SUN HOLIDAY XX 27 SUN HOLIDAY XX 27 WED 47 27 SAT HOLIDAY XX 27 MON DEEPAVALI XX

3 MON 89 28 MO

NPERIODIC TEST - 1

BEGINS 26 28 THU 48 28 SUN HOLIDAY XX 28 TUE PRACTICAL EXAM BEGINS 85

4 TUE 90 29 TUE 27 29 FRI 49 29 MON 69 29 WED 86

5 WED 91 30 WED 28 30 SAT HOLIDAY XX 30 TUE 70 30 THU 876 THU 92 31 THU 29 31 SUN HOLIDAY XX 31 FRI 887 FRI 93

Copy To : HOD's : AUTO/CIVIL/CSE/EEE/ECE/MECH/I.T./MCA/MATHS/CHEM/ENG/ADO/ACO/FILE With the request to circulate among the staff members PRINCIPAL

Theory and Practical Examination schedule to be published by the Controller of Examinations, Anna University should be followed.

156

Any Shortage in Working days is to be made up by conducting extra classes on Saturdays / Holidays. Class work is to be conducted even during slots of practical examinations. When one group of students take up practical examinations, tutorials and

revision are to be conducted for the remaining students.

157

Annexure – IX

TEACHING LOAD OF EACH FACULTY

S.No Name of the Teaching staff Designation Periods per week

B.E. COMPUTER SCIENCE AND ENGINEERING1 Dr. A.Saradha Asst, Professor 112 P.Kalyani Selection Grade

Lecturer10

3 R.Sivasubramaniam Senior Lecturer 204 G.Venkatachalam Senior Lecturer 215 A.Kavidha Senior Lecturer 226 M.Annapoorani Lecturer 227 S.Palanisamy Lecturer 208 N.Magesh Lecturer 229 M.Marikkannan Lecturer 2110 N. Vasuki Lecturer 2411 S. Kalaivani Lecturer 23

B.E. ELECTRONICS AND COMMUNICATIONS ENGINEERING12 L.Peter Stanley Bebington Professor 1213 R.Shanmugam Selection Grade

Lecturer16

14 R. Valarmathi Selection Grade Lecturer

16

15 M.Raja Selection Grade Lecturer

15

16 G.Balasubramanian Senior Lecturer 2217 A.Chilambuchelvan Senior Lecturer 1918 S. Bharathi Lecturer 2219 R.Senthilkumar Lecturer 2220 S.K. Fairoze Banu Lecturer 2221 N.Madhavi Lecturer 2022 P. Kaliram Lecturer 2223 P.K.Kowsalya Lecturer 22

B.E. INFORMATION TECHNOLOGY24 R.Pandian* Selection Grade

Lecturer25 K.S.Thirunavukarasu Selection Grade

Lecturer11

26 P.Bhuvaneswarai** Lecturer27 K.G. Maheswari Lecturer 2228 M.Poongothai** Lecturer29 R. Sathiyavani Lecturer 2030 S. Thilagavathi Lecturer 2131 S. Mohanasundaram Lecturer 2132 P. Thangavel Lecturer 2133 M. Sathyakala Lecturer 2234 B.V.Prakash Lecturer 14

159

35 R.Anurekha Lecturer 20

* Deputed to Anna University, Trichy as Controller of Examinations ** on Maternity Leave

B.E. ELECTRICAL AND ELECTRONICS ENGINEERING 36 Dr.B.Viswanathan Professor --37 Dr. R.Anita Assistant Professor 1638 S.Vijayan Senior Lecturer 2139 M.Mohammadha Hussaini Senior Lecturer 2140 B.Baby Priya Senior Lecturer 2241 A.Vetrivel Senior Lecturer 2242 Dr.N.Rajasekar Lecturer 2243 S.Dhanapal Lecturer 2244 S.Gomathi Lecturer 2245 K.Tamilselvan Lecturer 2146 A. Gowthaman Lecturer 2247 K.Murugan Lecturer 22

B.E. MECHANICAL ENGINEERING48 Dr.K.Mayilsamy Assistant Professor 1449 Dr.K. Balamurugan Selection Grade

Lecturer20

50 N.Kanagasabapathy Selection Grade Lecturer

21

51 S.Selvi Selection Grade Lecturer

20

52 S.Tharves Mohideen Selection Grade Lecturer

19

53 P.Kumaravel Selection Grade Lecturer

21

54 A.Sendhilkumar Selection Grade Lecturer

20

55 V.Periasamy Selection Grade Lecturer

20

56 R.Venkatachalam Selection Grade Lecturer

21

B.E. AUTOMOBILE ENGINEERING57 Dr.N.Nedunchezhian* Assistant Professor -58 P.Sellappan Selection Grade

Lecturer22

59 Dr.R.Subramanian Assistant Professor 1760 E.Rajasekar Selection Grade

Lecturer21

61 R.Thangavel Selection Grade Lecturer

21

62 C.Loganathan Selection Grade 22

160

Lecturer63 P.Selvakumar Selection Grade

Lecturer21

B.E. CIVIL ENGINEERING64 Dr.G.S.Thirugnanam Assistant Professor 1265 Dr.R.Murugesan Assistant Professor 2166 G.Srinivasan Selection Grade

Lecturer15

67 P.Palanivel Selection Grade Lecturer

15

68 Dr. G.Baskar Assistant Professor 1269 N.R.Chitra Selection Grade

Lecturer15

70 P. Saravanakumar Lecturer 1471 G.M. Gowthamakumar Lecturer

* is on sabbatical leave

MATHEMATICS 72 Dr.M.B.K.Moorthy Professor 1073 R.Mangalam Selection Grade

Lecturer13

74 N.Subramanian Senior Lecturer 1575 U.Krishnasamy Senior Lecturer 1576 S.Duraisamy Selection Grade

Lecturer12

77 K.S.Parthiban Senior Lecturer 1578 S.Kumaresan Senior Lecturer

PHYSICS79 K.Krishnan Selection Grade

Lecturer16

80 S.K.Muthukumar Selection Grade Lecturer

19

81 M.Dakshinamoorthy Selection Grade Lecturer

13

CHEMISTRY82 Dr.K.Periyasamy Assistant Professor 1083 T. Athma jothi Senior Lecturer 1984 R.Karpoorasundaram Senior Lecturer 19

ENGLISH85 D.Mathialagan Selection Grade

Lecturer12

161

Documents

MANDATORY DISCLOSURE BY INSTITUTIONS · Web viewMandatory Disclosure by Institutions running AICTE approved Engineering/Technology/Pharmacy programmes to be included in their respective