This is a version of a publication

in

Please cite the publication as follows:

DOI:

Copyright of the original publication:

This is a parallel published version of an original publication.This version can differ from the original published article.

published by

Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-AssistedEddy-Current Brake at High-Temperature Working Conditions

Gülec Mehmet, Aydin Metin, Nerg Janne, Lindh Pia, Pyrhönen Juha

M. Gulec, M. Aydin, J. Nerg, P. Lindh and J. Pyrhonen, "Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature WorkingConditions," in IEEE Transactions on Industrial Electronics, doi: 10.1109/TIE.2020.2992020.

Author's accepted manuscript (AAM)

IEEE

IEEE Transactions on Industrial Electronics

10.1109/TIE.2020.2992020

© 2020 IEEE

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtainedfor all other uses, in any current or future media, including reprinting/republishing this material foradvertising or promotional purposes, creating new collective works, for resale or redistribution toservers or lists, or reuse of any copyrighted component of this work in other works.

Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature

Working Conditions

Journal: Transactions on Industrial Electronics

Manuscript ID 20-TIE-0203.R1

Manuscript Type: Regular paper

Manuscript Subject: Actuators and Motors

Keywords: Eddy currents, Electromagnetic analysis, Rotating machine nonlinearanalysis

Are any of authors IEEEMember?: Yes

Are any of authors IESMember?: Yes