Magnetic drum separators give an effective intends to removing ferrous material from dry, mass items in free-streaming preparing frameworks. They are involved a stationary perpetual magnet, either standard Ferrite Magnets or High Power Uncommon Earth Magnets encased in a non-attractive stainless-steel drum. Item stream is occupied with the goal that it falls onto the top and streams over the surface of the drum. Ferrous matter contained in the item stream is attracted to the drum's surface (and held against it) by the effective magnet housed inside. While non-ferrous items tumbles from the side of the drum in a typical way, ferrous metal sticks to its surface. As the segment of the drum with the ferrous material turns to the side inverse the item stream, the attractive field is diminished so that the ferrous matter tumbles from the drum into a gathering holder. The final result is cleansed item prepared for handling without the stress of immoderate harm created by tramp metal. Uncommo
MAGNETIC DRUM SEPARATOR
MAGNETIC DRUM SEPARATOR12/14/2015 11:16 AM 2007 Microsoft
Corporation. All rights reserved. Microsoft, Windows, Windows Vista
and other product names are or may be registered trademarks and/or
trademarks in the U.S. and/or other countries.The information
herein is for informational purposes only and represents the
current view of Microsoft Corporation as of the date of this
presentation. Because Microsoft must respond to changing market
conditions, it should not be interpreted to be a commitment on the
part of Microsoft, and Microsoft cannot guarantee the accuracy of
any information provided after the date of this presentation.
MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO
THE INFORMATION IN THIS PRESENTATION.
1IntroductionMagnetic Drum Separators are of self-cleaning type
and provide continuous removal of ferrous contamination from a wide
range of free-flowing bulk and granular materials in high-volume
applications. Master Magnets Drum Separators are used in
applications where there is a high throughput of material to be
processed and where there is a need to extract smaller ferrous
particles from a given product streamDrum separators are available
in a wide range of sizes to suit a customers specific throughput
requirements and can either have an internal permanent or electro
magnet system depending on the application. Magnetic drum
separators provide an efficient means for extracting ferrous
material from dry, bulk products in free-flowing processing
systems. WorkingMagnetic Drums are constructed with a 180 degree
stationary magnet system, around which a cover revolves. Material
is fed onto the drum cover at the leading point of the magnet
section. Magnetic materials will adhere to the drum cover as it
revolves and will then be discharged behind the normal trajectory.
Non-magnetic materials will free-fall forward following their
normal trajectory.When material flows onto the drum, a stationary
magnetic assembly inside the unit's shell captures tramp metal and
holds it securely to the drum's stainless steel surface. With
contaminants removed, the good product falls freely to a discharge
point. As the drum rotates, cleats sweep the ferrous debris through
and out of the magnetic field. The tramp metal is discharged
separately, creating continuous self-cleaning separation
Industrial UsesPermanent Drum type Magnetic Separator is most
useful for separating tramp iron from non magnetic material
processed in bulk quantity, for the purity of end products,
recovery of metal having commercial value and protection of
processing plant and machinery. These are widely used in all the
processing industry for separation of iron contamination from
Minerals, Chemicals, Food, Flour, Plastics, Grains, Sand, Cement,
Fertilizers, Abrasives, Glass, Slag, Ores, Rock, Refractory and
many other products.Drum Separators can be provided as the drum
only or as a complete assembly with the housing and drive included.
A variety of sizes and strengths are available for many
applicationsRare Earth, Neodymium is 5 times stronger than Ceramic
Magnets and can remove micron sized particles.Magnetic drum
separators provide an efficient means for extracting ferrous
material from dry, bulk products in free-flowing processing
systems.
ApplicationsMinerals and ChemicalsFood and
FlourPlasticsGrainsSandFertilizersAbrasivesGlassSlagOresRockRefractoryRemoval
of ferrous contaminants from glass culletRecovery of scrap ferrous
metals in ELV plantsRemoval of ferrous particles from powder or
granular materialsRecovery of ferrous materials from incinerator
bottom ashRemoval of fine ferrous particles from
foodstuffsSeparation of ferrous in slag processing
applicationsRecovery of ferrous metals from municipal solid
waste
AdvantagesHelps in removing ferrous particles from any non
ferrous powder and granulesIdeal for plastic, food, fertilizer,
pharmaceutical, chemical, glass and continuous process
plantsProvide utmost protection to crushers, grinders, pulverizes,
and allied equipmentCan be used for mining and ore dressing
industryEliminate fire hazards and explosions in plants dealing
with explosive material.Save money, time and labour by reducing
break-down time and improving quality
FeaturesDesigned for continuous separation and self cleaning.
Ideal for high-flow, heavy-contamination applications. It comes
with Stainless steel drum and mild steel or stainless steel
housingsMaximum Recovery of Ferrous MetalsMinimum MaintenanceThey
require minimum space and are simple to operate.They are flexible
enough to be applied for various purposesCONTACTAdvanced Industrial
Material Separator(India) Private LimitedAddress: Plot No.234,
Green Garden, Co Operative Nagar, Ayyabakkam, Ambattur, Chennai -
600058.Mobile:+91 9698 669799, +91 9159566555 +91 9943307188Email::
[email protected]
