Upload
ahmed-awad
View
15
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Statistics
Citation preview
Describing Data: Displaying and Exploring Data
Chapter 4
Dot Plots
A dot plot groups the data as little as possible and the identity of an individual observation is not lost.
To develop a dot plot, each observation is simply displayed as a dot along a horizontal number line indicating the possible values of the data.
If there are identical observations or the observations are too close to be shown individually, the dots are “piled” on top of each other.
LO1 Construct and interpret a dot plot.
4-2
Dot Plots - ExamplesThe Service Departments at Tionesta Ford Lincoln Mercury and Sheffield Motors, Inc., two of the four Applewood Auto Group Dealerships, were both open 24 days last month. Listed below is the number of vehicles serviced during the 24 working at the two Dealerships. Construct dot plots and report summary statistics to compare the two dealerships.
LO1
4-3
Dot Plot – Minitab Example
LO1
4-4
Stem-and-Leaf In Chapter 2, frequency distribution was used to organize data
into a meaningful form. A major advantage to organizing the data into a frequency
distribution is that we get a quick visual picture of the shape of the distribution.
There are two disadvantages, however, to organizing the data into a frequency distribution:
(1) The exact identity of each value is lost
(2) Difficult to tell how the values within each class are distributed.
One technique that is used to display quantitative information in a condensed form is the stem-and-leaf display.
LO2 Construct and interpret a stem and leaf plot.
4-5
Stem-and-leaf Plot ExampleListed in Table 4–1 is the number of 30-second radio advertising spots purchased by each of the 45 members of the Greater Buffalo Automobile Dealers Association last year. Organize the data into a stem-and-leaf display. Around what values do the number of advertising spots tend to cluster? What is the fewest number of spots purchased by a dealer? The largest number purchased?
LO2
4-6
Stem-and-Leaf Stem-and-leaf display is a statistical technique to present a
set of data. Each numerical value is divided into two parts. The leading digit(s) becomes the stem and the trailing digit the leaf. The stems are located along the vertical axis, and the leaf values are stacked against each other along the horizontal axis.
Advantage of the stem-and-leaf display over a frequency distribution - the identity of each observation is not lost.
LO2
4-7
Stem-and-leaf Plot Example
The usual procedure is to sort the leaf values from the smallest to largest.
LO2
4-8
Measures of Position The standard deviation is the most widely used
measure of dispersion.
Alternative ways of describing spread of data include determining the location of values that divide a set of observations into equal parts.
These measures include quartiles, deciles, and percentiles.
LO3 Identify and compute measures of position.
4-9
Percentile Computation To formalize the computational procedure, let Lp refer to the
location of a desired percentile. So if we wanted to find the 33rd percentile we would use L33 and if we wanted the median, the 50th percentile, then L50.
The number of observations is n, so if we want to locate the median, its position is at (n + 1)/2, or we could write this as (n + 1)(P/100), where P is the desired percentile.
LO3
4-10
Percentiles - Example
Listed below are the commissions earned last month by a sample of 15 brokers at Salomon Smith Barney’s Oakland, California, office.
$2,038 $1,758 $1,721 $1,637 $2,097 $2,047 $2,205 $1,787 $2,287 $1,940 $2,311 $2,054 $2,406 $1,471 $1,460
Locate the median, the first quartile, and the third quartile for the commissions earned.
LO3
4-11
Percentiles – Example (cont.)
Step 1: Organize the data from lowest to largest value
$1,460 $1,471 $1,637 $1,721
$1,758 $1,787 $1,940 $2,038
$2,047 $2,054 $2,097 $2,205
$2,287 $2,311 $2,406
LO3
4-12
Percentiles – Example (cont.)
Step 2: Compute the first and third quartiles. Locate L25 and L75 using:
205,2$
721,1$
12100
75)115(4
100
25)115(
75
25
7525
L
L
LL
lyrespective positions,
12th and 4th the at located are quartiles third and first the Therefore,
LO3
4-13
Percentiles – Example (cont.)In the previous example the location formula yielded a whole number. What if there were 6 observations in the sample with the following ordered observations: 43, 61, 75, 91, 101, and 104 , that is n=6, and we wanted to locate the first quartile?
Locate the first value in the ordered array and then move .75 of the distance between the first and second values and report that as the first quartile. Like the median, the quartile does not need to be one of the actual values in the data set.The 1st and 2nd values are 43 and 61. Moving 0.75 of the distance between these numbers, the 25th percentile is 56.5, obtained as 43 + 0.75*(61- 43)
75.1100
25)16(25 L
LO3
4-14
Box Plot
A box plot is a graphical display, based on quartiles, that helps us picture a set of data.
To construct a box plot, we need only five statistics: the minimum value, Q1(the first quartile), the median, Q3 (the third quartile), and the maximum value.
LO4 Construct and analyze a box plot.
4-15
Boxplot - Example Alexander’s Pizza offers free delivery of its pizza within 15 miles.
Alex, the owner, wants some information on the time it takes for delivery. How long does a typical delivery take? Within what range of times will most deliveries be completed? For a sample of 20 deliveries, he determined the following information: Minimum value = 13 minutes Q1 = 15 minutes Median = 18 minutes Q3 = 22 minutes Maximum value = 30 minutes
Develop a box plot for the delivery times. What conclusions can you make about the delivery times?
LO4
4-16
Boxplot ExampleStep1: Create an appropriate scale along the horizontal axis.
Step 2: Draw a box that starts at Q1 (15 minutes) and ends at Q3 (22 minutes). Inside the box we place a vertical line to represent the median (18 minutes).
Step 3: Extend horizontal lines from the box out to the minimum value (13 minutes) and the maximum value (30 minutes).
LO4
4-17
Skewness In Chapter 3, measures of central location (the mean,
median, and mode) for a set of observations and measures of data dispersion (e.g. range and the standard deviation) were introduced
Another characteristic of a set of data is the shape. There are four shapes commonly observed:
symmetric, positively skewed, negatively skewed, bimodal.
LO5 Compute and understand the coefficient of skewness.
4-18
Skewness - Formulas for Computing
The coefficient of skewness can range from -3 up to 3. A value near -3, indicates considerable negative skewness. A value such as 1.63 indicates moderate positive skewness. A value of 0, which will occur when the mean and median are
equal, indicates the distribution is symmetrical and that there is no skewness present.
LO5
4-19
Commonly Observed Shapes
LO5
4-20
Skewness – An Example
Following are the earnings per share for a sample of 15 software companies for the year 2010. The earnings per share are arranged from smallest to largest.
Compute the mean, median, and standard deviation. Find the coefficient of skewness using Pearson’s estimate.
What is your conclusion regarding the shape of the distribution?
LO5
4-21
Skewness – An Example Using Pearson’s Coefficient
0171225
18395433
225115
9544016954090
1
95415
2674
222
..$
).$.($)(
Skewness the Compute :4 Step
3.18 is largest to smallest from arranged data, of set the in value middle The
Median the Find :3 Step
.$)).$.($...).$.($
Deviation Standard the Compute :2 Step
.$.$
Mean the Compute :1 Step
s
MedianXsk
n
XXs
n
XX
LO5
4-22
Describing Relationship between Two Variables
When we study the relationship between two variables we refer to the data as bivariate.
One graphical technique we use to show the relationship between variables is called a scatter diagram.
To draw a scatter diagram we need two variables. We scale one variable along the horizontal axis (X-axis) of a graph and the other variable along the vertical axis (Y-axis).
LO6 Create and interpret a scatterplot.
4-23
Describing Relationship between Two Variables – Scatter Diagram Examples
LO6
4-24
Describing Relationship between Two Variables – Scatter Diagram Excel Example
In the Introduction to Chapter 2 we presented data from the Applewood Auto Group. We gathered information concerning several variables, including the profit earned from the sale of 180 vehicles sold last month. In addition to the amount of profit on each sale, one of the other variables is the age of the purchaser.
Is there a relationship between the profit earned on a vehicle sale and the age of the purchaser?
Would it be reasonable to conclude that the more expensive vehicles are purchased by older Buyers?
LO6
4-25
Describing Relationship between Two Variables – Scatter Diagram Excel Example
LO6
4-26