Upload
hadiep
View
223
Download
0
Embed Size (px)
Citation preview
KW PlasticsPCR TECHNICAL DATA SHEET
KW 621
PROPERTY
REGULATORY
Copolymer Polypropylene Post-Consumer ResinInjection Molding
Melt Flow ASTM-D1238 7.0 g/10 minutes Specific Gravity ASTM-D792 0.92 g/mlElongation at Yield ASTM-D638 10.5% Tensile Yield Strength ASTM-D638 4,100 psi Flexural Modulus ASTM-D790 170,000 psi Notched Izod Impact ASTM-D256 1.0 ft-lb/inch
CONEG Compliant <100 ppm total ROHS Compliant
NOTE: While this information is presented in good faith and believed to be accurate, KW does not guarantee satisfactory results fromreliance upon such information and disclaims all liability for any loss or damage arising out of its use. No information contained herein
is to be construed as a recommendation to use this product in conflict with any patent.
ISO 9001: 2008 registered, ISO/ IEC 17025: 2005 accredited laboratories, C.O.A. on every lot.
CHARACTERISTICS
KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.
QUALITY
Good impact resistance. Available as mixed color and pre-colored black.
KW-TDS-KW621-20120123 TMB
1 Sanders Road Troy, AL 36081 | 334.566.1563 | 800.633.8744 | kwplastics.com
NOMINAL VALUES