Kukko Pullers

KUKKO – A world in motion since 1919!

2 www.KUKKO.com

in the KUKKO brand name becoming syn-onymous with extractor tools. Strict adhe-rence to the requirements of the customer benefi t – in a combination of Bergisch reli-ability, ever current modernity, high techni-cal competence and contemporary service concepts – has made KUKKO an esteemed partner of the retail trade and one of the top European system suppliers in the work-shop area of the automotive industry.

The company headquarters has been in Remscheid-Hasten since 1936. For four generations, KUKKO has been an inde-pendent, owner-managed family business with above-average earnings and is now one of the world‘s leading manufacturers of extractor tools of all types. Kleinbon-gartz & Kaiser oHG, the core company of today‘s KUKKO Group, was founded in 1919 by Alfred Kleinbongartz and his brother-in-law, Emil Kaiser, in Remscheid, the center of the German tool industry. From the very beginning, KUKKO specialized in the deve-lopment and manufacturing of extractor tools for the non-destructive dismounting of gears, bearings, ball bearings and simi-lar components in all areas of technology. To this day, the product lines, extractor tools and dismounting tools are the core business of the KUKKO Group. Numerous German and foreign patents, registered designs, and utility models bear witness to the intensive, continuously successful de-velopment work.

Innovation, quality, competence, ser-

vice, proximity to the customer have for decades been the foundation of the company‘s success in the world‘s markets. More than 60% of production is expor-ted and sold worldwide in more than 100 countries. The success with more than 150 extractor types in more than 500 diff erent imple-mentation sizes has, over time, resulted

Innovation

Quality

Competence

Service

Proximity to the customer

The pulling tool specialist since 1919

Innovation from tradition to achieve success

KUKKO-Werkzeugfabrik Kleinbongartz & Kaiser oHG

is the manufacturer of extractor tools for users in

trade and industry.

3www.KUKKO.com

QMS-TGA-ZM-01-93-00

Audit

QM-064-R50 AGQS Qualitäts- und Telefon +49 2191 438 24

Certificate QM-064-95-05 Umweltmanagement GmbH

Telefax +49 2191 438 26

Validity

2012-03-31 Elberfelder Straße 77 www.agqs.de

1st certification 1995-02-01 D-42853 Remscheid

[email protected]

CERT I F ICATE The AGQS Qualitäts- und Umweltmanagement GmbH hereby

certifies, that the company TURNUS Eduard Gottfr. Ferne GmbH & Co. KG

D-42857 Remscheid Taubenstr. 5

for the scope development, production and sales

of tools at the sites D-42857 Remscheid, Taubenstr. 5

D-42853 Remscheid, Herderstr. 10 + 13

has implemented and maintains a quality management system.

An audit, documented in a report, has verified that this

management system fulfills the requirements of the following

standard: DIN EN ISO 9001:2008

Remscheid, 2009-03-23

GQmwer28

CC

93-00 -R50 AG5-05 Um31 Elbe1 D-42

C

QMS-TGA-ZM-01-93-00

Audit QM-064-R50 AGQS Qualitäts- und Telefon +49 2191 438 24

Certificate QM-064-95-05 Umweltmanagement GmbH Telefax +49 2191 438 26

Validity 2012-03-31 Elberfelder Straße 77 www.agqs.de

1st certification 1995-02-01 D-42853 Remscheid [email protected]

CERT I F ICATE The AGQS Qualitäts- und Umweltmanagement GmbH hereby

certifies, that the company

KUKKO–Werkzeugfabrik Kleinbongartz & Kaiser oHG

D-42857 Remscheid

Taubenstr. 5

for the scope

development, production and sales of

pullers and special tools

at the sites

D-42857 Remscheid, Taubenstr. 5

D-42853 Remscheid, Herderstr. 10 + 13

has implemented and maintains a quality management system.

An audit, documented in a report, has verified that this

management system fulfills the requirements of the following

standard:

DIN EN ISO 9001:2008

Remscheid, 2009-03-23

Our quality philosophy covers not only product quality and customer benefi t, but also the processes run-ning in our companies.

One demonstration of this is the Group-wide DIN EN ISO quality ma-nagement system which KUKKO im-plemented as early as 1994, one of the fi rst German tool manufacturers to do so, certifi ed in 1995, and since then has continuously implemented, developed and re-certifi ed.

KUKKO currently complies with the requirements of DIN EN ISO 9001:

2008 with expanded process-orien-ted requirements in all areas from de-sign to procurement, production and sales to after-sales service.

KUKKO and TURNUS „T.Q.M.“

Concept of orientation towards customer benefi t

4 www.KUKKO.com

KUKKO – A world in motion since 1919!

5www.KUKKO.com

Conversion kg to pounds:

1 2,204623 10 22,04623

2 4,409246 15 33,069345

3 6,613869 20 44,09246

4 8,818492 25 55,115575

5 11,023115 30 66,13869

6 13,227738 35 77,161805

7 15,432361 40 88,18492

8 17,636984 45 99,208035

9 19,841607 50 110,23115

Precautionary Notes and Helpful Hints

All tools must always be used for the intended purposes

under the envisioned conditions and

within their postulated limitations.

Check the condition of your tools at regular intervals, and replace any damaged or worn parts.

Keep the threads of all spindles, heads, etc. clean and well oiled. (KUKKO special sliding grease for pressure screws Art. 699999)

Before you start work, acquaint yourself with the proper use of the tool or tools in question, with due attention to pertinent safety measures.

If anything at all is unclear about any of the above, it is best to call the factory for some fi rsthand advice.

Prior to starting work, make sure that the pulling tool is in good working order.

Double-check the tool for correct mounting, and monitor the forces incidental to the pulling process.

Never violate the maximum load data prescribed for the tool in question. Use a torque wrench

(for mechanical/pressure-screw-driven tools) or a pressure gauge (hydraulic/pump-driven tools)

to keep tabs on the applied forces.

Always wear suitable personal protective equipment, including protective goggles.

Always wrap the pulling tool and the workpiece in a protective blanket as a precaution against the potential eff ects of sudden release.

If the tool appears to be overloaded, works sluggishly, or is otherwise negatively conspicuous, interrupt the pulling process, and replace the tool with a larger model.

Never use an electric- or pneumatic-powered impact/hammer drill for driving a pulling tool.

Never use extensions to increase the applied torque.

Never alter a pulling tool or related product in any way.

Since heat detracts from the thermal properties of steel, and since some parts require heating to facilitate their removal, remember to never heat the pulling tool along with the part.

> 3 mm

90

Easy-glide positioning and fric-tional fi xation of puller arms thanks to optimized new geo-metry of the guide-rails.

The new KUKKO ARMLOCK guarantees maximum stability of the sliding part and the claw.

The knurled-knob adjusters enable quick loosening, posi-tioning and tightening of the puller arms by hand, without requiring a wrench.

Easy-turn tightening nut thanks to a built-in thrust bearing that reduces friction.

Easy adjustability of counter-stay braces via internal spring-washer mounts.

Tools with hydraulic cylinders for some extra "force".

Art.-No.

2 0 - 2

7www.KUKKO.com

20-1 009433 90 3 5/8 100 4 70-140 614160 17 5 80 1,10

20-10 009921 120 5 100 4 70-180 614160 17 5 80 1,20

20-2 009501 160 6 150 6 100-220 621220 22 7,5 150 2,80

20-20 010088 200 8 150 6 100-260 621220 22 7,5 150 3,10

20-3 009686 250 10 200 8 180-340 626280 27 12,5 300 7,00

20-30 010163 350 14 200 8 180-440 626280 27 12,5 300 8,00

20-4 009761 520 21 200 8 200-590 633350 36 15 400 13,40

20-40 411861 650 26 300 12 200-710 633350 36 15 400 14,80

20-5 009846 750 30 400-700 16-27 340-1000 637600 41 20 650 44,30

20-1-2 466311 90 3 5/8 200 8 70-140 17 614160 5 80 1,60

20-1-25 908675 90 3 5/8 250 10 70-140 17 614160 5 80 2,10

20-1-4 989643 90 3 5/8 400 16 70-140 17 614160 5 80 1,90

20-10-2 466496 120 5 200 8 70-180 17 614160 5 80 1,70

20-10-25 908682 120 5 250 10 70-180 17 614160 5 80 2,25

20-10-4 989650 120 5 400 16 70-180 17 614160 5 80 1,70

20-2-3 466564 160 6 300 12 100-220 22 621220 7,5 150 3,60

20-20-3 466649 200 8 300 12 100-260 22 621220 7,5 150 3,90

20-3-25 901188 250 10 250 10 180-340 27 626280 12,5 300 7,60

20-3-3 466724 250 10 300 12 180-340 27 626280 12,5 300 8,10

20-3-4 467066 250 10 400 16 180-340 27 626280 12,5 300 9,20

20-3-5 467301 250 10 500 20 180-340 27 626280 12,5 300 10,20

20-30-3 466809 350 14 300 12 180-340 27 626280 12,5 300 9,10

20-30-4 467141 350 14 400 16 180-440 27 626280 12,5 300 10,20

20-30-5 467486 350 14 500 20 180-440 27 626280 12,5 300 11,20

20-4-3 466984 520 21 300 12 200-590 36 633350 15 400 14,50

20-4-4 467266 520 21 400 16 200-590 36 633350 15 400 15,60

20-4-5 467554 520 21 500 20 200-590 36 633350 15 400 16,60

20-40-4 730641 650 26 400 16 200-710 36 633350 15 400 17,00

20-40-5 731976 650 26 500 20 200-710 36 633350 15 400 18,00

2-arm universal pullers, type series 20

with standard-type arms in standard-lengths. These arms are attached to and removed from the puller head by tightening and loosening the retaining bolt with a wrench.

2-arm universal pullers with extended pulling arms,

type series 20

· No. 20-1-2 – 20-20-30 with standard-length arms in combination with arm extensions. · Practical arm extensions allows accommodation of any required, case-specifi c depth.· No. 20-3-25 – 20-40-5 with standard-type, off -length arms.

8 www.KUKKO.com

20-1+ 644771 90 3 5/8 100 4 70-140 614160 17 5,0 80 1,10

20-10+ 644856 120 5 100 4 70-180 614160 17 5,0 80 1,20

20-2+ 644931 160 6 150 6 100-220 621220 22 7,5 150 2,80

20-20+ 645013 200 8 150 6 100-260 621220 22 7,5 150 3,10

20-3+ 645198 250 10 200 8 180-340 626280 27 12,5 300 7,00

20-30+ 645273 350 14 200 8 180-440 626280 27 12,5 300 8,00

20-1-S 757396 90 3 5/8 100 4 70-140 614160 17 4,5 35 1,00

20-10-S 757471 120 5 100 4 70-180 614160 17 4,5 35 1,10

20-2-S 727368 160 6 150 6 100-220 621220 22 7,0 120 2,70

20-20-S 727443 200 8 150 6 100-260 621220 22 7,0 120 3,00

20-3-S 727511 250 10 200 8 180-340 626280 27 10 220 6,90

20-30-S 727696 350 14 200 8 180-440 626280 27 10 220 7,90

219-1 777777 190 8 series: 20; 20+; 20-S; 20+S 0,70

a

2-arm universal pullers, type series 20+

with quick-adjusting type arms.

These arms can be quickly and easily attached to the puller head by hand, i.e., by tightening and loosening the ergonomic knurled knob.

2-arm universal pullers, type series 20-S

with special-purpose arms for working in particularly confi ned spaces.

Special for pulling gear wheels, bearings, pinions and detents.

Clamp for 2-arm pullers

Combine the 2-arm pullers in the 20 series with clamp 219-1, available separately, for additional grip on the part to be extracted. It is attached to the puller arm after the puller has been fi tted andprevents the puller arm slipping under very high forces.

SMALLpulling arms!

9www.KUKKO.com

20-1+S 756221 90 3 5/8 100 4 70-140 17 614160 4,5 35 1,10

20-10+S 756306 120 5 100 4 70-180 17 614160 4,5 35 1,20

20-2+S 756481 160 6 150 6 100-220 22 621220 7,0 120 2,80

20-20+S 756559 200 8 150 6 100-260 22 621220 7,0 120 3,10

20-3+S 756634 250 10 200 8 180-340 27 626280 10 220 7,00

20-30+S 756719 350 14 200 8 180-440 27 626280 10 220 8,0

20-4-AV 706233 520 21 300-500 12-20 200-590 36 633500 12 400 18,70

20-40-AV 732058 650 26 300-500 12-20 200-710 36 633500 12 400 20,00

20-5 009846 750 30 400-700 16-27 340-1000 41 637600 15 650 44,30

2-arm universal pullers, type series 20-S+

with quick-adjusting type special-purpose arms for working in particularly

confi ned spaces.


Heavy-duty, two-arm universal pullers, type series 20-AV

with length-adjustable arms

SMALLpulling arms!

10 www.KUKKO.com

Art.-No.

3 0 - 2

11www.KUKKO.com

30-1 013393 90 3 5/8 100 4 70-140 17 614135 6 80 1,30

30-10 013621 120 5 100 4 70-180 17 614135 6 80 1,60

30-2 013478 160 6 150 6 100-220 22 621220 9 150 3,50

30-20 013706 200 8 150 6 100-260 22 621220 9 150 3,90

30-3 013546 250 10 200 8 180-340 27 626280 11 250 9,00

30-3-25 901256 250 10 250 10 180-340 27 626280 11 250 7,00

30-30 303005 350 14 200 8 180-440 27 626280 11 250 10,50

30-4 303302 375 15 200 8 220-500 36 633350 15 500 15,30

30-40 303319 520 21 200 8 280-600 36 633350 15 500 21,00

30-5 303326 650 26 300-500 8 290-740 41 637350 20 650 30,50

30-1-2 730726 90 3 5/8 200 8 70-140 17 614135 6 80 2,10

30-10-2 730801 120 5 200 8 70-180 17 614135 6 80 2,20

30-2-3 730986 160 6 300 12 100-220 22 621220 9 150 4,70

30-20-3 731068 200 8 300 12 100-260 22 621220 9 150 4,80

30-3-25 901256 250 10 250 10 180-340 27 626280 11 250 7,00

30-3-3 731143 250 10 300 12 180-340 27 626280 11 250 10,30

30-3-4 731228 250 10 400 16 180-340 27 626280 11 250 11,80

30-3-5 731303 250 10 500 20 180-340 27 626280 11 250 11,30

3-arm universal pullers, type series 20

with standard-type arms in standard-lengths.

These arms are attached to and removed from the puller head by tightening and loosening the retaining bolt with a wrench.

3-arm universal pullers with extended pulling arms,

type series 30

· No. 30-1-2 – 30-20-3 with standard-length arms in combination with arm extensions. · Practical arm extensions allows accommodation of any required, case-specifi c depth.· No. 30-3-25 – 30-3-5 with standard-type, off -length arms.

12 www.KUKKO.com

9-1 005053 10 10 13 series: 20; 20+; 30; 30+ 0,85

9-2 005138 15 15 17 series: 20; 20+; 30; 30+ 1,60

30-1+ 731488 90 3 5/8 100 4 70-140 17 614135 6 80 1,40

30-10+ 731556 120 5 100 4 70-180 17 614135 6 80 1,50

30-2+ 731631 160 6 150 6 100-220 22 621220 9 150 3,60

30-20+ 731716 200 8 150 6 100-260 22 621220 9 150 3,70

30-3+ 731891 250 10 200 8 180-340 27 626280 11 250 8,80

30-1-S 727771 90 3 5/8 100 4 70-140 17 614135 6 40 1,40

30-10-S 728198 120 5 100 4 70-180 17 614135 6 40 1,50

30-2-S 727856 160 6 150 6 100-220 22 621220 9 120 3,50

30-20-S 727931 200 8 150 6 100-260 22 621220 9 120 3,70

30-3-S 728013 250 10 200 8 180-340 27 626280 11 220 9,40SMALLpulling arms!

Hydraulic pressfor use with 2 - and 3-arm pullersIf it should not be possible to separate a part that is stuck using the standard pressure spindle, the hydraulic press is used. The extra press is then placed bet-ween the spindle and the part to be extracted, and the part that is stuck is pulled hydraulically without the need for great force.

3-arm universal pullers, type series 30+

with quick-adjusting type arms.

These arms can be quickly and easily attached to the puller head by hand, i.e., by tightening and loosening the ergonomic knurled knob.

3-arm universal pullers, type series 30-S

with special-purpose arms for working in particularly confi ned spaces.


13www.KUKKO.com

8-01 887871 7 series: 20; 20+; 30; 30+ 0,85

8-02 887901 10 series: 20; 20+; 30; 30+ 1,60

SMALLpulling arms!

30-1+S 756894 90 3 5/8 100 4 70-140 17 614135 6 40 1,10

30-10+S 756979 120 5 100 4 70-180 17 614135 6 40 1,20

30-2+S 757051 160 6 150 6 100-220 19 621220 9 120 2,80

30-20+S 757136 200 8 150 6 100-260 19 621220 9 120 3,10

30-3+S 757211 250 10 200 8 180-340 22 626280 11 220 7,00

11-0-AV 730078 375 15 300-500 12-20 220-500 36 633350 15 500 23,10

11-1-AV 730153 520 21 300-500 12-20 280-600 41 637500 20 650 28,50

11-2-AV 730238 650 26 300-500 12-20 290-740 41 637500 20 650 30,50

Hydraulic pressure spindle for use with medium-sized 2 - and 3-arm pullersIf it should not be possible to separate a part that is stuck using the standard pressure spindle, it can be swapped for a hydraulic pressure spindle. When pul-lers with hydraulic spindles are used, the hydraulic pulling force must always be built up in a controlled way i.e. using a torque wrench.

3-arm universal pullers, type series 30-S+

with quick-adjusting type special-purpose arms for working in particularly

confi ned spaces.


Heavy-duty 3-arm universal pullers, type series 11-AV

with length-adjustable arms

14 www.KUKKO.com

1-V-100-P1-V-150-P

Art.-No.

2 0 - 1

15www.KUKKO.com

Standard-type arms in standard lengths

· P: 1 pair = 2 pcs· S: 1 set = 3 pcs

1-90-P 001338 100 4 2 20-1; 20-10 0,56

2-150-P 002403 150 6 2 20-2; 20-20 1,20

3-200-P 003233 200 8 2 20-3; 20-30 3,10

1-90-S 001413 100 4 3 30-1; 30-10 0,80

2-150-S 002571 150 6 3 30-2; 30-20 1,80

3-200-S 003318 200 8 3 30-3; 30-30 4,70

Standard-type with off -length arms


1-190-P 001666 200 8 2 20-1; 20-10 1,00

1-250-P 001901 250 10 2 20-1; 20-10 1,25

2-300-P 002731 300 12 2 20-2; 20-20 2,12

3-300-P 003561 300 12 2 20-3; 20-30; 20-4; 20-40 3,20

3-400-P 003806 400 16 2 20-3; 20-30; 20-4; 20-40 5,30

3-500-P 004148 500 20 2 20-3; 20-30; 20-4; 20-40 8,50

1-190-S 001741 200 8 3 30-1; 30-10 1,20

1-250-S 002083 250 10 3 30-1; 30-10 1,65

2-300-S 002816 300 12 3 30-2; 30-20 3,20

3-200-S 003318 200 8 3 30-3; 30-20; 30-4; 30-40 4,70

3-300-S 003646 300 12 3 30-2; 30-20; 30-4; 30-40 6,50

3-400-S 003981 400 16 3 30-3; 30-30; 30-4; 30-40 7,70

3-500-S 004223 500 20 3 30-3; 30-30; 30-4; 30-40 11,70

1-190-P1-250-P2-300-P3-300-P3-400-P3-500-P

1-90-P2-150-P3-200-P

1-90-S2-150-S3-200-S

1-V-100-P 985058 100 20-1; 20-10; 20-1+; 20-10+; 20-1-S; 20-10-S; 20-1+S; 20-10+S; 20-1-S-T; 20-10-S-T; 20-1+S-T; 20-10+S-T 0,60

1-V-150-P 985089 150 20-1; 20-10; 20-1+; 20-10+; 20-1-S; 20-10-S; 20-1+S; 20-10+S; 20-1-S-T; 20-10-S-T; 20-1+S-T; 20-10+S-T 0,82

2-V-150-P 985201 150 20-2; 20-20; 20-2+; 20-20+; 20-2-S; 20-20-S; 20-2+S; 20-20+S 1,08

1-V-100-S 985065 100 30-1; 30-10; 30-1+; 30-10+; 30-1-S; 30-10-S; 30-1+S; 30-10+S; 30-1-S-T; 30-10-S-T; 30-1+S-T; 30-10+S-T 0,90

1-V-150-S 985096 150 30-1; 30-10; 30-1+; 30-10+; 30-1-S; 30-10-S; 30-1+S; 30-10+S; 30-1-S-T; 30-10-S-T; 30-1+S-T; 30-10+S-T 1,23

2-V-150-S 985218 150 30-2; 30-20; 30-2+; 30-20+; 30-2-S; 30-20-S; 30-2+S; 30-20+S 1,62

Extensions, type series V

KUKKO extensions can be inserted into standard claws of series 20 and series 30 puller. An unlimited number of extensions can be joined and inserted, depending on the depth of the part to be pulled.· P: 1 pair = 2 pcs· S: 1 set = 3 pcs

1-190-S1-250-S2-300-S3-300-S3-400-S3-500-S

1-V-100-P1-V-150-P2-V-150-P

1-V-100-S1-V-150-S2-V-150-S

16 www.KUKKO.com

Off -length arms with quick-adusting


Quick-adjusting type special-purpose arms for confi ned spaces

in standard lengths· P: 1 pair = 2 pcs· S: 1 set = 3 pcs

1-92-P 732393 100 4 2 20-1+; 20-10+ 0,56

2-152-P 973765 150 6 2 20-2+; 20-20+ 1,20

3-202-P 732706 200 8 2 20-3+; 20-30+ 3,36

1-92-S 973741 100 4 3 30-1+; 30-10+ 0,84

2-152-S 973772 150 6 3 30-2+;30-20+ 1,80

3-202-S 973895 200 8 3 30-3+; 30-30+ 5,04

1-192-P 973611 200 8 2 20-1+; 20-10+ 0,98

1-252-P 973673 250 10 2 20-1+; 20-10+ 1,12

2-302-P 973819 300 12 2 20-2+; 20-20+ 2,15

3-302-P 973932 300 12 2 20-3+; 20-30+ 4,20

3-402-P 974014 400 16 2 20-3+; 20-30+ 5,80

3-502-P 974137 500 20 2 20-3+; 20-30+ 8,08

1-192-S 973635 200 8 3 30-1+; 30-10+ 1,47

1-252-S 973697 250 10 3 30-1+; 30-10+ 1,68

2-302-S 973833 300 12 3 30-2+;30-20+ 3,20

3-302-S 973956 300 12 3 30-3+; 30-30+ 6,30

3-402-S 974038 400 16 3 30-3+; 30-30+ 8,70

3-502-S 974151 500 20 3 30-3+; 30-30+ 12,12

1-92-P2-152-P3-202-P

2-152-P2-302-P3-202-P3-302-P3-402-P3-502-P

1-92-S1-192-S1-252-S

2-152-S2-302-S3-202-S3-302-S3-402-S3-502-S

Special-purpose arms for confi ned spaces in standard lengths

interchangeable with standard puller arms of series 20 and 20-S pullers. · P: 1 pair = 2 pcs· S: 1 set = 3 pcs

1-91-P2-151-P3-201-P

1-91-P 434716 100 4 2 20-1; 20-10 0,50

2-151-P 702921 150 6 2 20-2; 20-20 1,36

3-201-P 726521 200 8 2 20-3; 20-30 3,52

1-91-S 497834 100 4 3 30-1; 30-10 0,75

2-151-S 728686 150 6 3 30-2; 30-20 2,04

3-201-S 728846 200 8 3 30-3; 30-30; 30-4; 30-40 1,80

1-91-S1-191-S1-251-S

SMALLpulling arms!

17www.KUKKO.com

1-191-P1-251-P1-401-P2-301-P3-301-P3-401-P3-501-P

1-191-P 461286 200 8 2 20-1; 20-10 0,90

1-251-P 461446 250 10 2 20-1; 20-10 1,20

1-401-P 985010 400 16 2 20-1; 20-10 1,24

2-301-P 703188 300 12 2 20-2; 20-20 2,00

3-301-P 726781 300 12 2 20-3; 20-30; 20-4; 20-40 4,60

3-401-P 726941 400 16 2 20-3; 20-30; 20-4; 20-40 5,60

3-501-P 727108 500 20 2 20-3; 20-30; 20-4; 20-40 6,70

1-191-S 497917 200 8 3 30-1; 30-10 1,35

1-251-S 498091 250 10 3 30-1; 30-10 1,80

1-401-S 985034 400 16 3 30-1; 30-10 1,86

2-301-S 728769 300 12 3 30-2; 30-20 3,06

3-301-S 728921 300 12 3 30-3; 30-4; 30-40 6,90

3-401-S 729003 400 16 3 30-3; 30-4; 30-40 8,40

3-501-S 729188 500 20 3 30-3; 30-4; 30-40 9,96

Special-purpose arms for confi ned spaces in off -lengths


1-191-S1-251-S1-401-S2-301-S3-301-S3-401-S3-501-S

Quick-adjusting type special-purpose arms for confi ned spacesinterchangeable with standard puller arms of series 20 and 20-S pullers. · P: 1 pair = 2 pcs· S: 1 set = 3 pcs

1-93-P2-153-P3-203-P

1-193-P1-253-P2-303-P3-303-P3-403-P3-503-P

1-93-P 973352 100 4 2 20-1+S; 20-10+S 0,56

2-153-P 973789 150 6 2 20-2+S; 20-20+S 1,36

3-203-P 973901 200 8 2 20-3+S; 20-30+S; 30-4; 30-40 3,76

1-93-S 973758 100 4 3 30-1+S; 30-10+S 0,84

2-153-S 973796 150 6 3 30-2+S; 30-20+S 2,04

3-203-S 973918 200 8 3 30-3+S; 30-30+S; 30-4; 30-40 5,64

1-193-P 973642 200 8 2 20-1+S; 20-10+S 0,98

1-253-P 973710 250 10 2 20-1+S; 20-10+S 1,24

2-303-P 973857 300 12 2 20-2+S; 20-20+S 2,04

3-303-P 973970 300 12 2 20-3+S; 20-30+S 4,10

3-403-P 974052 400 16 2 20-3+S; 20-30+S 5,90

3-503-P 974175 500 20 2 20-3+S; 20-30+S 6,90

1-193-S 973659 200 8 3 30-1+S; 30-10+S 1,47

1-253-S 973734 250 10 3 30-1+S; 30-10+S 1,86

2-303-S 973871 300 12 3 30-2+S; 30-20+S 3,06

3-303-S 973994 300 12 3 30-3+S; 30-30+S 6,15

3-403-S 974076 400 16 3 30-3+S; 30-30+S 8,85

3-503-S 974199 500 20 3 30-3+S; 30-30+S 10,35

Quick-adjusting type special-purpose arms for confi ned spaces

in off -lengths


1-93-S2-153-S3-203-S

1-193-S1-253-S2-303-S3-303-S3-403-S3-503-S

SMALLpulling arms!

SMALLpulling arms!

SMALLpulling arms!

18 www.KUKKO.com

Art.-No.

1 7 - 11 8 - 1

19www.KUKKO.com

Separator sets with pulling device, serie15

4-parts, the sets contain one separator, one pulling device and a pair of extensions.

• The sharp blades enable fl ush parts to be extracted where hooks cannot be used.• The sharp, wedge-shaped blades are pressed behind the parts to be extracted, being placed between the bearing and seat.• For pulling, the tension bolts on the pulling device (model 18) must be screwed into the separator.• Sets in the KUKKO-L-BOXX system: • Register online and extend the manufacturer‘s warranty to three years. • Secure storage of the tools in special foam. • Operating manual always visible in the lid. • Cases can be combined for easier transport.

Separator sets with pulling device, model 17

4-parts, the sets contain one separator with centrical quick-action adjusting screw,

one pulling device and a pair of extensions.

• Particularly easy to handle, because the separator jaws tighten quickly and centrically with the aid of the adjusting screw.• The sharp, wedge-shaped blades are pressed behind the parts to be extracted, being placed between the bearing and seat.• For pulling, the tension bolts on the pulling device (model 18) must be screwed into the separator.• Sets in the KUKKO-L-BOXX system: • Register online and extend the manufacturer‘s warranty to three years. • Secure storage of the tools in special foam. • Operating manual always visible in the lid. • Cases can be combined for easier transport.

15-K 007641 15-0, 18-0, 19-1-P 4 5-60 13/64 – 2 3/8 60 2 3/8 M 10 2,70

15-A 007521 15-1, 18-1, 19-1-P 4 12-75 1/2 – 3 75 3 M 10 4,70

15-B 007606 15-2, 18-2, 19-2-P 4 22-115 7/8 – 4 5/8 115 4 5/8 M 14 x 1,5 8,40

15-C 007781 15-3, 18-3, 19-3-P 4 25-155 1 – 6 1/4 155 6 1/4 M 18 x 1,5 14,70

15-D 007866 15-4, 18-4, 19-4-P 4 30-200 1 1/4 – 8 200 8 G 5/8“ 32,00

15-E 308826 15-5, 18-5, 19-5-P 4 30-250 1 1/4 – 10 250 10 G 3/4“ 50,60

17-K 008856 17-0, 18-0, 19-1-P 4 5-60 13/64 – 2 3/8 60 2 3/8 M 10 2,90

17-A 008511 17-1, 18-1, 19-1-P 4 12-75 1/2 – 3 75 3 M 10 5,00

17-B 008696 17-2, 18-2, 19-2-P 4 22-115 7/8 – 4 5/8 115 4 5/8 M 14 x 1,5 9,20

17-C 008771 17-3, 18-3, 19-3-P 4 25-155 1 – 6 1/4 155 6 1/4 M 18 x 1,5 16,1

Extensions for pulling bolts, type series 19

with the aid of these extensions, the pulling bolts can be accommodated to any required pulling depth.· 1 pair = 2 pcs

19-1-P 169984 100 18-0+18-1 0,30

19-2-P 170041 100 18-2 0,60

19-3-P 170126 100 18-3 0,60

19-4-P 168321 200 18-4 1,60

19-5-P 152306 200 18-5 2,00

20 www.KUKKO.com

Separators, type series 15

Press the separator jaws together by uniformly tightening the nuts on both sides.

15-0 006951 5 - 60 13/64 – 2 3/8 60 2 3/8 M 10 18-0 0,70

15-1 007033 12 - 75 1/2 – 3 75 3 M 10 18-1 1,00

15-2 007118 22 - 115 7/8 – 4 5/8 115 4 5/8 M 14x1,5 18-2 2,50

15-3 007293 25 - 155 1 – 6 1/4 155 6 1/4 M 18x1,5 18-3 5,20

15-4 007378 30 - 200 1 1/4 – 8 200 8 G 5/8“ 18-4 11,50

15-5 007453 30 - 250 1 1/4 – 10 250 10 G 3/4“ 18-5 18,60

17-0 008108 5 - 60 13/64 – 2 3/8 60 2 3/8 M 10 18-0 0,95

17-1 008283 12 - 75 1/2 – 3 75 3 M 10 18-1 1,50

17-2 008368 22 - 115 7/8 – 4 5/8 115 4 5/8 M 14 x 1,5 18-2 3,34

17-3 008443 25 - 155 1 – 6 1/4 155 6 1/4 M 18 x 15 18-3 6,90

Separators, type series 17

with centrical quick-action adjusting screw

Particularly easy to handle, because the separator jaws tighten quickly and centrically with the aid of the adjusting screw.

The adjusting nuts on the separator must be tighte-ned evenly in turn. Other-wise the separator blade may twist on the spindle or the spindle thread may be-come damaged.

Information for separation pulling

21www.KUKKO.com

When pulling the separator blades, make sure that they are seated as far as the stop under the part to be ext-racted before pulling the pulling device upwards.

The arms of the pulling de-vice must always be scre-wed into the separator bla-de until they stop.

Pulling devices with a mechanical pressure screw, type series 18

For use with a separator, screw the pulling bolts into the tapholes in the separator jaws.

Pulling devices with a hydraulic pressure screw, type series 18

For use with a separator, screw the pulling bolts into the tapholes in the separator jaws.

18-0 075599 50-110 2 – 4 13/32 150 6 15-0, 17-0 3 14 612130 0,85

18-1 075674 60-150 2 3/8 – 6 200 8 15-1, 17-1 5 19 618175 1,70

18-2* 075759 60-200 2 3/8 – 8 250 10 15-2, 17-2, 13-2 7 22 621170 3,20

18-3* 005961 80-300 3 1/8 – 12 300 12 15-3, 17-3, 13-3 10 27 626280 6,20

18-4* 006043 120-380 5 – 15 350 14 15-4 15 27 626280 13,90

18-5* 075834 150-440 6 – 18 400 16 15-5 20 41 637600 20,70

18-2-B 885723 60-200 2 3/8 – 8 250 10 12 8-01 13-2, 15-2, 17-2 7 4,1

18-3-B 885730 80-300 3 1/8 – 12 300 12 12 8-02 13-3, 15-3, 17-3 10 6,7

18-4-B 885747 120-380 5 – 15 350 14 - 8-1-B 15-4 15 17,0

18-5-B 885754 150-440 6 – 18 400 16 - 8-2-M 15-5 20 26,8

* The models 18-2, 18-3, 18-4 and 18-5 can be converted for hydraulic operation at will by simply replacing the mechanical pressure screw with a hydraulic pressure screw.

22 www.KUKKO.com

KUKKO –

A world in motion since 1919!

23www.KUKKO.com

24 www.KUKKO.com

We show you how it works!The QR codes on our products now take you to product information, tips, examples and comprehensive videos of the products in use.

Video application

25www.KUKKO.com

Internal extractors, no. 21-0 through 21-9

These patented* extractor models made of tough, high-tensile steel (30CrNiMo8) with an internal safety stop have excellent tensioning eff ect and can be actuated either with a counterstay or with a slide-hammer unit, depending on the situational requirements. (*DE 102009026247 / EP 10168699.6-1251)

21-0

21-00

21-01

21-02

21-1

21-2

21-3

21-4

21-5

21-6

21-0 010408 5- 8 13/64 – 5/16 73 22-1; 22-0; 21-V-0 0,07

21-00 010576 6-10 1/4 – 13/32 73 22-1; 22-0; 21-V-0 0,07

21-01 010651 8-12 5/16 – 1/2 73 22-1; 22-0; 21-V-0 0,08

21-02 010736 10-14 25/32 – 9/16 73 22-1; 22-0; 21-V-0 0,08

21-1 010811 12-16 1/2 – 5/8 72 22-1; 22-0; 21-V-0 0,16

21-2 010996 14-19 9/16 – 3/4 72 22-1; 22-0; 21-V-0 0,18

21-3 011153 18-23 23/32 – 15/16 89 22-1; 22-2; 22-0-1; 22-0; 21-V-0 0,20

21-4 011238 20-30 7/8 – 1 1/4 92 22-1; 22-2; 22-0-1; 22-0; 21-V-0 0,22

21-5 011498 28-40 1 7/64 – 1 5/8 101 22-1; 22-2; 22-0-1; 22-0; 21-V-0 0,36

21-6 011566 36-46 1 27/64 – 1 13/16 113 22-2; 22-3; 22-0-1 0,68

21-7 011641 45-58 1 25/32 – 2 19/64 135 22-2; 22-3; 22-0-1 1,20

21-8 011726 56-70 2 1/4 – 2 3/4 133 22-2; 22-3; 22-0-1 1,44

21-9 011986 70-100 2 3/4 – 4 166 22-3; 22-0-1 2,56

Internal extractors with segment grip, no. 21-E

specially designed for pulling parts situated close to a casing wall.

21-40 411526 9,6-18 3/8-3/4 10 3/8 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,22

21-41 186066 11,5-19 29/64-3/4 12 1/2 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,22

21-42 186141 12,5-21 1/2-55/64 14 9/16 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,22

21-43 186226 14,5-22 37/64-7/8 15+16 5/8 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,22

21-44 186301 16,5-23 21/32-59/64 17+18 3/4 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,23

21-45 186486 18,5-24 47/64-61/64 20 13/16 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,23

21-46 186554 20-25 51/64-1 22 7/8 92 22-1; 22-2; 22-0; 22-0-1; 21-V-0 0,23

21-7

21-8

21-9

26 www.KUKKO.com

Art.-No.

2 1 - 32 2 - 2

27www.KUKKO.com

Internal extractors, nos. 21-89 and 21-90

for pulling large ball bearings, ball-bearing races, sleeves and similar parts.

Extension for Internal extractor

· An unlimited number of extensions can be joined and inserted, depending on the depth of the part to be pulled.· The internal extractor will be screwed step by step into the extension with the counter stay or the slide hammer.

21-89 011801 56-110 2.1/4 - 4.3/8 185 22-0-2; 22-4 2,30

21-90 012068 100-200 4 - 7.7/8 220 22-0-2; 22-5 6,30

Internal extractors with segment grip, no. 21-E

specially designed for pulling parts situated close to a casing wall.

21-0-E 909153 4,8-6,5 3/16-1/4 54 22-0,22-0-1,22-1,22-2 0,04

21-00-E 909160 6,8-9,5 9/32-3/8 54 22-0, 22-0-1, 22-1, 22-2 0,04

21-01-E 909177 9,5-12,5 3/8-1/2 54 22,0,22-0-1,22-1,22-2 0,04

21-1-E 930003 12,0-16,0 1/2-5/8 80 22-0,22-0-1,22-1,22-2 0,16

21-2-E 931000 14,0-19,0 9/16-3/4 83 22-0,22-0-1,22-1,22-2 0,18

21-3-E 931109 18,0-23,0 23/32-15/16 90 22-0,22-0-1,22-1,22-2 0,20

21-4-E 909184 24-0-34,0 61/64-1.5/16 98 22-0,22-0-1,22-1,22-2 0,24

21-5-E 924071 34,0-48,0 1.5/16-1.7/8 110 22-0-1; 22-2 0,24

21-6-E 924088 48,0-63,0 1.7/8-2.15/32 120 22-0-1; 22-2 0,24

21-7-E 924095 63,0-78,0 2.15/32-3.1/16 120 22-0-1; 22-2 0,24

21-V-0 909207 21-V-040; 21-V-060;

21-V-080; 21-V-310 4 40-100 21-0 – 21-5; 21-40 – 21-46 1,00

21-V-040 909214 - 1 40 21-0 – 21-2 0,08

21-V-060 909221 - 1 60 21-0 – 21-2 0,10

21-V-080 909238 - 1 80 21-0 – 21-2 0,14

21-V-310 914386 - 1 100 21-3 – 21-5; 21-40 – 21-46 0,28

28 www.KUKKO.com

on- and unscrewed

reduction collar

* Counterstays 22-1, 22-2 and 22-3 are each supplied with an attached reduction collar.

** Type 22-3 is supplied with an attached connecting nut and a reduction collar screwed into the nut.

Use according to table.

Counterstays, type series 22

for internal extractors series 21 and 21-E

Once the internal extractor has been mounted in the bore of the part to be extracted, the pulling force is applied by tightening the head nut of the pulling screw in a counterstay placed on the workpiece from which the component is to be extracted.

22-1* 012228 21-0 – 21-02 with reduction collar

21-1 – 21-5; 21-0-E – 21-4-E without reduction collar3 0,60

22-2* 012303 21-3 – 21-5; 21-0-E – 21-4-E with reduction collar

21-6 – 21-8; 21-5-E – 21-7-E without reduction collar4 1,60

22-3** 012488 21-6 – 21-8 with reduction collar with

21-9 without reduction collar5 3,90

22-4 112478 21-89 7 4,50

22-5 012556 21-90 9 7,80

22-122-222-3

22-422-5

Key/pin extractor with slide hammer, type series 22

10-piece set in plastic case (275 x 230 x 80 mm)

Extractor sets with slide-hammers strikers for pulling such threaded parts as parallel keys and dowel pins and, in combination with an internal extractor, for use on ball bearings, ball bearing races, sleeves and similar parts.

KS-22-01 924569M3; M4; M5; M6; M8; M10;

KS-22-01-GH = M12; verzinkt: M7; M10; 15-16G

10 21-0 – 21-8; 21-0-E – 21-7-E 220 0,85 3,0

KS-22-02 951121M6; M8x1; M10; M10x1; M12x1;

M15x1,5; KS-22-01-GH=M12; verzinkt: M7; M10; 15-16G

10 21-0 – 21-8; 21-0-E – 21-7-E 220 0,85 3,0

KS-22-01Interchange-able stud bolts

The counterstay heads have built-in

thrust bearings for easy, frictionless application of the requisite pulling force (no. 22-2, 22-3, 22-4).

29www.KUKKO.com

Slide-hammer strikers, type series 22-0

for internal extractors and needle bearing extractors belonging to

type series 21 and 21-E.

Useful for jobs with restricted space where standard counterstay can‘t be used. Slide hammer unit is attached to the extractor and hammer vigorously bumped against the ridge to extract the bearing.

22-0 012143 21-0 – 21-2; 21-0-E – 21-4-E with reduction collar

21-3 – 21-5; 21-40 – 21-46 without reduction collar250 150 0,50 0,70

22-0-1 555558 21-3 – 21-8; 21-40 – 21-46; 21-0-E – 21-4-E with reduction collar

21-9; 21-5-E – 21-7-E without reduction collar340 230 1,70 2,50

22-0-2* 111204 21-90 with reduction collar

21-89 without reduction collar530 340 5,00 6,50

22-0-2-100 111211 22-02 - - 3,00 3,00

22-0-2-100

22-0

22-0-1

22-0-2

5kg

1,7kg

0,5kg

* For particularly tight-fi tting parts, the hammer‘s striking weight can be increased to 8 kg by adding

a screw-on weight (available as a special accessory no. 22-0-2-100).

Slide-hammer 22-0-2

The hammer‘s striking weight can be increased by adding one or more aditional screw-on weights (art.-no. 22-0-2-100). Each aditional weight increases the striking weight by 3 kg.

+ =5kg

3kg

8kg

30 www.KUKKO.com

THE NEW TIDYING SYSTEM FOR KUKKO TOOLS FROM SORTIMO:

Secure storage of the tools in special foam

Complete – see everything at a glance

Operating manual in the cover is always visible

Special grease for pressure screws included

Fits the systems of well-known manufacturers

Online registration to extend the manufacturer‘s warranty to three years

Y E A RS

KUKKO SYSTEM

31www.KUKKO.com

TOOLS INSERT-BOXES LOCKABLE OFFICE MAX. LOAD CAR HOLDER 100 KG + CRASHSAFE

SECURE MOBILE FLEXIBLE

With the L-BOXX system from KUKKO, every option is open to you. You can confi gure them with insert boxes, deep drawing parts, foam inserts and a variety of applications for the lid. Your tool, small parts and spares are stored and transported safely and clearly. The L-BOXX system is the perfect mobile solution and can be su-perbly integrated into your vehicle.They are available in various sizes and even as empty boxes.

ONE SYSTEM. SEVERAL OPTIONS.

The following cases are followed so far in

KUKKO SYSTEM

available to others:

Y E A RSregister.kukko.com

PRODUCTREGISTRATION +

WARRANTY-EXTENSION

ONLINE

quick and easy

registration.

15-B 007606 Separating set 4

17-B 008696 Separating set withquick-action pressure screw 4

24-A 012716 Set of bearing pulling and extracting tools (2 cases) 11

24-B 012891 Set of bearing pulling and extracting tools (2 cases) 14

25-A 013058 Set of bearing extracting tools 8

25-B 013133 Set of bearing extracting tools 10

25-C 013218 Set of bearing extracting tools 11

70-K 786754 Ball bearing extractor set for deep-groove ball bearings 35

70-A 022128 Ball bearing extractor set for deep-groove ball bearings 57

70-B 320866 Ball bearing extractor set for deep-groove ball bearings 47

K-2030-10 974748 Set of 2- and 3-arm pullers 6

K-2030-10-S 306181 Set of 2- and 3-arm pullers for confi ned spaces 6

K-2030-10-S-T 852022 Set of 2-and 3-arm pullers for very confi ned spaces 6

K-2030-10-S/8000C 178740 Set of 2- and 3-arm pullers for confi ned spaces and Wera Zyklop-ratchet 8

32 www.KUKKO.com

Combi puller set, KS-2030-1+S/8000A

for combining 2 KUKKO pullers plus Wera Zyklop ratchet 8000A

The combi set, which is a result of a co-operation between Wera and KUKKO, off ers an unbeatable combination of the tried and tested KS-2030-1+S puller set with the addition of the superb Wera Zyklop 8000A ratchet – never previously available in this combination. This set is based on the 2 and 3-arm pullers with slender S-legs for tight cavities, which are needed in any workshop. The arms can be quickly and easily attached to the puller head by hand, i.e., by tightening and loosening the ergonomic knurled knob. The Wera Zyklop 8000A ratchet with 1/4“ drive is the perfect complement for any extraction process.

Combi puller set, K-2030-10-S/8000C

for combining 8 pullers plus Wera Zyklop ratchet 8000C and bonus spanner

The combi set, which is a result of a co-operation between Wera and KUKKO, off ers an unbeatable combination of the tried and tested K-2030-10-S puller set with the addition of the superb Wera Zyklop 8000C ratchet – never previously available in this combination. This set is based on the 2 and 3-arm pullers with slender S-legs for tight cavities, which are needed in any workshop. The Wera Zyklop 8000C ratchet with 1/2“ drive is the perfect complement for any extraction process.

drive

KS-2030-1+S/8000A 345857 90 100 13 1/4“ 2,14

drive

K-2030-10-S/8000C 178740 120-130 100-350 17 1/2“ 9,15

33www.KUKKO.com

Art.-No.

129-1

34 www.KUKKO.com

suitable for

129-1 024696 18-22 3/4 - 7/8 50 2universal type for passenger cars and light

commercial vehicles 0,75

suitable for

129-3-A 803178 30 1 3/16 65 2 9/16

e.g., AUDI A6 and A8, 1999 models, BMW series 3 and 5, and other types of

vehicles with confi ned connecting spaces2,00

suitable for

129-3 270949 34 1 5/16 70 2 3/4 medium-size trucks, busses and construction vehicles 2,00

129-4 271021 40 1 5/8 85 3 3/8 heavy trucks, busses and construction vehicles 2,60

suitable for

129-5 865084 36 1 7/16 70 2 3/4medium-size and heavy trucks,

busses and special-purpose vehicles 3,80

suitable for

129-2 024771 16-22-32 5/8 - 7/8 - 1 1/4 70 2 3/4all passenger cars, commercial vehicles

and medium-sized trucks 1,20

Universal type for passenger cars and light commercial vehicles

Extractor for DIN ISO 7803 ball joints

Special tool for forcing out ball journals when removing ball-and socket joints.

Suitable for all passenger cars, commercial vehicles

and medium-sized truckswith lever transmission, with 3 openings


Special model for passenger cars with aluminum chassis

Especially for aluminum chassis, with lever transmission


For trucks, busses and construction vehicles

with lever transmission


For medium-size and heavy trucks, busses an special-purpose vehicles

Especially for medium and heavy trucks


35www.KUKKO.com

suitable for

129-5-H 865091 36 1 7/16 70 2 3/4 15 mittlere und schwere LKW, Busse, Bau- und Sonderfahrzeuge 4,60

suitable for

129-5-45-H10 333361 35-45 1 13/32 -1 3/4 120 5 10 heavy universal trucks, buses, low-fl oor buses 7,91

129-5-45-H20 333422 35-45 1 13/32 -1 3/4 120 5 20 heavy universal trucks, buses, low-fl oor buses 9,61

For medium-size and heavy trucks, busses and

special-purpose vehicles

Especially for medium and heavy trucks

With hydraulic spindle to allow controlled and safe working. It uses the entire capability of the puller over and above what can be achieved with a mechanical spindle. Special-purpose tool for extracting the ball pins when dismantling the ball joints, for example on tie rods, steering arms, axle suspensions, stabilizers etc.

Heavy-duty ball joint puller for trucks

Especially for heavy trucks, busses etc.

Hydraulic ball joint puller with hydraulic cylinder. This can be screwed onto the extracting tool in three diff erent positions*, which enables parts to be extracted even in places that are awkward to get at.Special-purpose tool for extracting ball pins when dismantling ball joints, for example on push and tie rods. A hydraulic hand pump, such as the KUKKO YHP-325 hand pump, must be used to drive the hydraulic cylinder (with 3/8“ high fl ow coupling box).

Heavy-duty ball joint puller for trucks 129-5-45-H10 and 129-5-45-H20

hydraulic hand pump, such as the KUKKO YHP-321 hand pump (with tubing), must be used to drive the hydraulic cylinder (with 3/8“ high fl ow coupling box).

+

129-5-45-H10

129-5-45-H20YHP-321

* 3 possible positions of the pressure cylinder:

36 www.TURNUS.de

37www.TURNUS.de

177-HP04 158132 177-P000; 177-P045; 177-P090; 177H000 4 0,34

Picks & hooks rangePick, 45° pick, 90° pick and hook, set inside practical plastic case.

Set of 4 picks and hooks for boring out holes and bores, releasing stuck seal washers or seal rings and separating cables in cable harnesses. Can also be used in sanitary and automotive applications. 2-component comfort grip for eff ortless screwing operations. Hard and fast grip even if hands are wet and greasy.

177-P000 017538 3,5 70 155 0,035

177-P045 017545 3,5 70 155 0,035

177-P090 017552 3,5 70 155 0,035

177-H000 017521 3,5 70 155 0,035

Picks & hooks

Pick, 45° pick, 90° pick and hook

Set of 4 picks and hooks for boring out holes and bores, releasing stuck seal washers or seal rings and separating cables in cable harnesses. Can also be used in sanitary and automotive applications. 2-component comfort grip for eff ortless screwing operations. Hard and fast grip even if hands are wet and greasy.

177-P000

177-P045

177-P090

177-H000

170-006 051389 3,5 x 100 / 4 x 125 / 5,5 x 150 / 6,5 x 150 PZ 1 / PZ 2 1,00

Set of 6 screwdrivers in cardboard packaging

Set of slotted and Philips head screwdrivers.

2-component comfort grip for eff ortless screwing operations. Hard and fast grip even if hands are wet and greasy. The anti-slip edge at the end of the handle increases reliability even further.In cardboard packaging with transparent panel.

38 www.TURNUS.de

mm mm mm

176-075 017378 0,5 mm 2,5 75 160 0,027

176-100 017385 0,8 mm 3,5 100 185 0,034

176-125 017392 1,0 mm 5,5 125 230 0,076

176-150 017408 1,2 mm 6,5 150 265 0,110

176-PH0 017415 PH 0 – 60 145 0,032

176-PH1 017422 PH 1 – 80 175 0,057

176-PH2 017446 PH 2 – 100 205 0,083

176-PH3 017453 PH 3 – 150 265 0,147

176-PZ0 017460 PZ 0 – 60 145 0,032

176-PZ1 017477 PZ 1 – 80 175 0,053

176-PZ2 017484 PZ 2 – 100 205 0,085

176-PZ3 017491 PZ 3 – 150 265 0,147

VDE set of 5 screwdrivers in cardboard packaging

Certifi ed to IEC 60900:2004, isolated, 1000 V

peaks produced according to DIN ISO 2380 and DIN ISO 8764

5-part insulated screwdriver set for safe working under voltages up to 1000 V. 2-component comfort grip for eff ortless screwing operations. Hard and fast grip even if hands are wet and greasy. The anti-slip edge at the end of the handle increases reliability even further. In cardboard packaging with transparent panel.

VDE slotted screwdriver

Certifi ed to IEC 60900:2004, isolated, 1000 V

peaks produced according to DIN ISO 2380 and DIN ISO 8764

Insulated slotted screwdriver for safe working under voltages up to 1000 V. 2-component comfort grip for eff ortless screwing operations. Hard and fast grip even if hands are wet and greasy. The anti-slip edge at the end of the handle increases reliability even further.

176-005 017361 2,5 x 75 / 3,5 x 100 / 5,5 x 125; PH 1 / PH 2 1,00

39www.TURNUS.de

mm mm mm

171-0806 005429 0,20 mm 0,8 60 140 0,01

171-1206 002008 0,20 mm 1,2 60 140 0,01

171-1506 005443 0,25 mm 1,5 60 140 0,01

171-1806 005450 0,30 mm 1,8 60 140 0,01

171-2006 005467 0,40 mm 2,0 60 140 0,01

171-2506 025960 0,40 mm 2,5 60 140 0,01

171-2507 025977 0,40 mm 2,5 75 155 0,01

171-3010 025984 0,50 mm 3,0 100 180 0,02

171-3015 025991 0,50 mm 3,0 150 230 0,03

171-3024 026011 0,50 mm 3,0 240 320 0,05

171-3510 026028 0,60 mm 3,5 100 180 0,02

171-3515 026035 0,60 mm 3,5 150 230 0,03

171-4010 026042 0,80 mm 4,0 100 180 0,02

171-4015 026059 0,80 mm 4,0 150 230 0,03

171-PH000 026080 PH 000 – 60 140 0,02

171-PH00 026073 PH 00 – 60 140 0,02

171-PH0 026066 PH 0 – 60 140 0,02

171-PH108 026097 PH 1 – 80 160 0,03

171-PH118 026103 PH 1 – 185 265 0,07

171-PH128 026110 PH 1 – 285 365 0,08

171-PZ0 002640 PZ 0 – 60 140 0,01

171-PZ1 002664 PZ 1 – 80 160 0,01

171-T01 002893 T 01 – 50 130 0,01

171-T02 002909 T 02 – 50 130 0,01

171-T03 002916 T 03 – 50 130 0,01

171-T04 002923 T 04 – 50 130 0,01

171-T05 002930 T 05 – 50 130 0,01

171-T06 002947 T 06 – 50 130 0,01

171-T07 998714 T 07 – 50 130 0,01

171-T08 998721 T 08 – 60 140 0,02

171-T09 998738 T 09 – 60 140 0,02

171-T10 998745 T 10 – 80 160 0,03

171-T15 998752 T 15 – 80 160 0,03

171-T20 001414 T 20 – 100 180 0,04

171-R006 018115 1,5 x 60 / 2,0 x 60 / 2,5 x 75; PH00 x 60 / PH0 x 60 / PH1 x 60 6 0,10

171-R106 018122 TX 04 / TX 05 / TX 06 / TX 07 / TX 08 / TX 10 6 0,12

Precision Screwdriver, 6 pcs.

Tool set in rolling bag

2-component comfort grip with rotating cap. These precision screwdrivers are especially suitable for tasks in mechanical engineering, electronics or modelmaking.The smooth- turning rotation cap allows fast screwing.

Precision Screwdriver

2-component comfort grip with rotating cap.

These precision screwdrivers are especially suitable for tasks in mechanical engineering, electronics or modelmaking. The smooth- turning rotation cap allows fast screwing.

40 www.TURNUS.de

472-020 537852 200 x 100 19,5 x 9,5 1,00

472-025 537937 250 x 120 22 x 10,5 1,62

472-030 538019 300 x 140 25 x 12 2,42

Lever clamps

All-steel clamp, with lever grip. Self-locking and resistant to vibration. With release lever for easy release in any position. Sliding clamp, die-forged, hardened and tempered, high-gloss galva-nized. Galvanized and hinged clamping plate. Release lever made from hardened plastic-coated steel. Ergonomic lever handle. Hardened and tempered fi xed clamp made from blank-drawn sectional steel, high-gloss galvanized.

504+025 002329 250 x 120 30 x 8 1,70

504+030 225483 300 x 120 30 x 8 1,70

504+040 002336 400 x 120 30 x 8 2,00

504+050 225506 500 x 120 30 x 8 2,15

504+060 225513 600 x 120 30 x 8 2,35

504+080 225520 800 x 120 30 x 8 2,70

504+100 012946 1000 x 120 30 x 8 3,10

Universa with dual-component grip

Malleable cast iron, with convenient 2-component grip for eff ortless clamping fi xed and moving arms made from high-quality malleable cast iron, safety hollow profi le rail, grooved side, galvanized, plastic protective covers, smooth-running trapezoidal threaded spindle, burnished.

469UH020 942861 200 x 100 19,5 x 9,5 1,00

469UH025 942878 250 x 120 22 x 10,5 1,50

469UH030 942885 300 x 140 25 x 12 1,90

469UH040 942892 400 x 120 25 x 12 2,00

469UH060 942908 600 x 120 25 x 12 2,50

Universa with dual-component grip

Malleable cast iron, with convenient 2-component grip for eff ortless clamping, fi xed and moving arms made from high-quality malleable cast iron, safety hollow profi le rail, grooved side, galvanized, plastic protective covers, smooth-running trapezoidal threaded spindle, burnished.

470+016 700027 160 x 80 16 x 7,5 0,50

470+020 700041 200 x 100 19,5 x 9,5 0,90

470+025 700058 250 x 120 22 x 10,5 1,30

470+030 700065 300 x 140 25 x 12 1,80

470+040 700072 400 x 120 25 x 12 1,90

470+060 700096 600 x 120 25 x 12 2,40

Screw clamps

All-steel, 2-component grip, slip protection and spindle protection, plus range. Fixed clamp made from cold-drawn sectional steel, hardened and tempered. Sliding clamp, die-forged, har-dened and tempered, galvanized. With comfort grip and slip protection. Clamping member with integrated spindle protection.

41www.TURNUS.de

500-120 498177 120 x 65 22 x 6 0,60

503-016 520274 160 x 80 22 x 6 0,71

503-120 009519 200 x 100 30 x 8 1,35

504-025 502379 250 x 120 30 x 8 1,60

504-030 502454 300 x 120 30 x 8 1,70

504-040 502522 400 x 120 30 x 8 1,85

504-050 502607 500 x 120 30 x 8 2,05

504-060 502782 600 x 120 30 x 8 2,20

504-080 502867 800 x 120 30 x 8 2,60

504-100 502942 1000 x 120 30 x 8 3,00

Screw clamps, UNIVERSA

Malleable cast iron, with handy wooden grip, covered grip eliminates risk of injury caused by burrs, fi xed and moving arms made from high-quality malleable cast iron, safety hollow profi le rail, grooved side, galvanized, plastic protective covers, smooth-running trapezoidal threaded spindle, burnished.

492+116 004200 160 x 80 22 x 6 0,90

492+120 004217 200 x 80 22 x 6 0,95

492+125 004224 250 x 80 22 x 6 1,00

492+130 003739 300 x 80 22 x 6 1,05

492+140 003746 400 x 80 22 x 6 1,16

492+220 003753 200 x 100 30 x 8 1,59

492+225 003760 250 x 100 30 x 8 1,68

492+230 003777 300 x 100 30 x 8 1,78

492+240 003784 400 x 100 30 x 8 1,97

492+250 003791 500 x 100 30 x 8 2,16

492+325 003807 250 x 120 30 x 8 1,83

492+330 003814 300 x 120 30 x 8 1,92

492+340 003821 400 x 120 30 x 8 2,11

492+350 003838 500 x 120 30 x 8 2,30

492+360 003845 600 x 120 30 x 8 2,49

492+380 003852 800 x 120 30 x 8 2,87

492+390 003869 1000 x 120 30 x 8 3,25

492+430 003876 300 x 140 35 x 9 2,55

492+440 003593 400 x 140 35 x 9 2,80

492+450 003609 500 x 140 35 x 9 3,05

492+460 003616 600 x 140 35 x 9 3,30

492+480 003623 800 x 140 35 x 9 3,80

492+490 003630 1000 x 140 35 x 9 4,30

492+540 003647 400 x 175 35 x 9 3,13

492+550 003654 500 x 175 35 x 9 3,38

492+560 003661 600 x 175 35 x 9 3,63

492+580 003678 800 x 175 35 x 9 4,13

492+590 003685 1000 x 175 35 x 9 4,63

“Optima” malleable cast iron screw clamps

Screw clamps with 2-component comfort grip.

Rigid arms with shaft reinforcement for powerful clamping, lasting protecting against corrosion. Flexible plastic protective covers, integrated internal slip protection (projection 80 mm and above), smooth-running trapezoidal threaded spindles, safety hollow profi le rail, grooved, galvanized.

42 www.TURNUS.de

Hand vises

with broad head and wing nut, gripping power: 20.000N

Strong, highly reliable type, made of special-purpose, drop-forged tool steel,heat-treated and galvanized, surface-ground jaws, serrated on the inside, with prismatic indent for holding round or angular parts, reinforced shanks with pivot guide and covered, captive round-steel bracing spring.

Hand vise with wrench

with broad head and hexonal nut and wrench, gripping power: 20.000N


Saw-sharpening and hoop vises

with slender jaws, 45° off set

indispensable for holding saw blades during sharpening, for making hoops, for soldering work, and for holding parts of complicated geometry.To be used only in combination with a bench vise.

Pointed-jaw hand vise

with narrow head and wing nut, gripping power: 20.000N


L

mm

101-100 535049 40 18 100 0,33

101-120 535124 45 22 120 0,50

101-130 535209 42 25 130 0,55

101-145 535384 52 28 145 0,73

101-160 535469 58 35 160 0,90

101-180 535537 60 40 180 1,50

101-200 535612 65 45 200 1,90

L

mm

103-160 909833 58 35 160 1,0

103-180 527952 60 40 180 1,6

103-200 528034 65 45 200 2,1

L

mm

112-125 529444 30 30 125 0,65

112-150 529512 40 35 150 1,00

L

mm

102-120 527617 13 20 120 0,34

43www.TURNUS.de

326-132 012076 2-4-6-8-10-12-14-16-18-20 10 1,65

326-133 012083 2-4-6-8-10-12-14-16-18-20-22-24-26-28-30 15 1,95

326-134 012090 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20 19 2,80

326-230 687991 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-22-24-25-28-30 25 4,74

Set of arch punches

DIN 7200 A, inside wooden box, sets of 10, 15 and 19 parts

For punching or producing seals and seal rings out of rubber, leather, felt, plastic, cork, cloth, etc.

Set of arch punches

DIN 7200 A, in plastic case, set of 25 parts

including a plastic plate 100 x 80 mmFor punching or producing seals and seal rings out of rubber, leather, felt, plastic, cork, cloth, etc.

Amm

....-digit

333-015 158255 1,5 15 1,09

333-020 158262 2,0 15 1,1

333-025 158279 2,5 10 1,24

333-030 158286 3,0 10 1,32

333-040 158293 4,0 10 1,96

333-050 158309 5,0 8 2,08

Type holder set

Type holder sets in various sizes, inside a metal case.

Contains: AAA BB CC DD EEEE FF GG HH III JJ KK LLL MM NNN OOO PP Q RRR SSS TT UUU V WW XX Y Z & // -- ..‚‚1111 2222 333 4444 555 666 777 888 999 000 ++ 8/10/15 blank types

326-109 916695 3-5-7-9-11-13-15-17-19 9 1,00

326-119 916701 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-20 19 2,14

326-120 626532 3-5-6-8-10-12-13-14-16-19-22-25 12 1,73

326-130 997700 2-4-6-8-10-12-14-16-18-20-22-24-26-28-30 15 2,92

Set of arch punches

DIN 7200 A, inside plastic wallet, available in sets of 9, 12, 15 and 19

For punching or producing seals and seal rings out of rubber, leather, felt, plastic, cork, cloth, etc.

© 2012 Kleinbongartz & Kaiser oHG. All rights reserved. Unauthorized copying or distribution without written permission is strictly prohibited.

BR-K

atal

og-E

N-0

312-

lett

er

KUKKO-Werkzeugfabrik

Kleinbongartz & Kaiser oHG

Taubenstrasse 5 • 42857 Remscheid • GERMANYPhone +49(0)2191/9339-0Fax +49(0)2191/9339-100

[email protected] • www.KUKKO.com

over

Documents

Kukko Pullers