Dec’17JSW Steel Ltd. - CIN: l27102mh1994plc152925 | JSW Steel Coated Products Ltd.- CIN: U27100mh1985plc037346

HOT ROLLED COILSPLATES & SHEETS

JSW STEEL LTD.JSW Centre, Bandra Kurla Complex, Bandra (East), Mumbai - 400051Phone: 022 4286 1000 | Fax: 022 4286 3000 | Toll free: 1800-266-2661 Email: support.steel@jsw.in | Web: www.jsw.in

Disclaimer: While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at reader's risk and no warranty is implied or expressed by JSW Steel with respect to the use of information contained herein. The information in this publication is subject to change or modification without notice. Please contact the JSW Steel office for the latest information.

Content

21 Testing Facilities

22 Packing standard forHot Rolled Coils

23 Hot RolledCut to Length

24 Vijayanagar WorksProduct Specification

26 ProductRange

27 Product Capabilities

48 Dolvi WorksProduct Specification

76 The Ultimate Test

79 SalesOffices

05 JSW Group

07 JSW Steel

09 JSW SteelCoated Products

11 SettingBenchmarks

14 JSW Hot RolledProducts

15 ManufacturingFacilities

18 Advantages JSW

19 ManufacturingProcess

20 ProductCapabilities

JSW Steel helping indiamove forward.

040504

JSW GroupAn $11 billion conglomerate, with presence across India, USA, South America & Africa, the JSW

Group is a part of the O.P. Jindal Group with strong footprints across core economic sectors,

namely, Steel, Energy, Infrastructure, Cement, also in Ventures and Sports.

The Group is paving the way for India’s development as a global superpower. JSW Steel is

India’s leading steel producer and among the world’s most illustrious steel company. The Group

is also leading in every sector that it operates in.

JSW Energy is one of the earliest private entrants into the power sector positioned strongly as

a full-spectrum integrated power company with a presence across the power sector value

chain. It is one of the most efficient Power Company in the country with one of the country's

largest open cast mining operation by volume and one of the largest private sector Hydro

Operator in India. JSW Cement creates the building blocks of India with its environment friendly

products. JSW Infrastructure is contributing to the nation’s development by providing world

class services to clients through state of- the-art ports, terminals, shipyards and other

facilities. JSW Sports runs the Sports Excellence Program (SEP) to identify, nurture and develop

Indian athletes to ensure that they bring sporting glory to the nation on the global stage. JSW

Sports also runs the Bengaluru Football Club & The Bengaluru Yodhas wrestling team.

The JSW Group is committed to creating more smiles at every step of the journey. JSW Founda-

tion, the Group’s CSR and sustainability arm, is in constant pursuit of making life better for

communities with its various initiatives in the fields of health, education, livelihood and sports,

along with art and culture.

JSW Group is proud to be charting a course to excellence that creates opportunities for every

Indian and leads to the creation of a sustainable, dynamic and developed nation.

Dolvi & Salav WorksVijayanagar Works Salem Works

The flagship company of USD 11 billion JSW Group, JSW Steel is one of

India’s leading integrated steel manufacturers with a capacity of 18 MTPA.

It is one of the fastest growing companies in India with a footprint in over

140 countries. With state-of-the-art manufacturing facilities located in

Karnataka, Tamil Nadu and Maharashtra, it is recognized for its innovation

and quality.

JSW offers a wide gamut of steel products that includes Hot Rolled, Cold

Rolled, Bare & Pre-painted Galvanized & Galvalume®, TMT Rebars, Wire

Rods and Special Steel.

JSW Steel continues to enhance its capabilities to meet the rapidly

changing global market needs. To stay on the leading edge of technical

advancement, JSW has entered into technological collaboration with JFE

Steel Corp, Japan to manufacture high strength and advanced high

strength steel for the automobile sector. JSW Steel has also entered into a

joint venture with Marubeni-Itochu Steel Inc. Tokyo, to set up a

state–of-the-art steel processing centers.To strengthen its global

network, the Company has also acquired a Pipe and Plate making steel

mill in Baytown, Texas in USA. Going forward, JSW Steel aims to produce 40

million tons of steel annually.

JSW Steel Ltd.

06 07

Vasind Works Tarapur Works Kalmeshwar Works

08 09

JSW Steel Coated Products Limited is 100% subsidiary company of JSW Steel,

having state–of-the-art manufacturing facilities in the state of Maharashtra.

JSW Steel Coated Products Ltd. is India’s largest manufacturer and exporter of

Coated Steel as well as Colour Coated Steel. The production facilities, Tarapur

and Vasind Works, are located in the vicinity of major ports. The company’s

Kalmeshwar Works is centrally located near Nagpur to serve across regions.

JSW is an ISO 9001: 2008 Certified Organization and the first licensee producer

for Galvalume® in India. The Tarapur plant is specialized in manufacturing

Ultra-Thin Coated Products. The company is also a manufacturer of appliance

grade colour coated products. JSW’s Kalmeshwar Works is the first producer of

Galvanized and Colour Coated Steel in India. JSW also has established India’s

first Appliance Grade Line to manufacture Pre Coated and Vinyl Coated Metal.

JSW Steel Coated Products Ltd.

• First continuous annealing line in India

• Widest Cold Rolling Mill (upto 1870 mm width)

• India's largest Coated Steel producer

• First Licensee Galvalume® producer in India

• JSW Steel Salem works is the largest integrated Alloy and Special Steel plant in India

• Widest Hot Strip Mill in India

• India’s most modern and largest Vertical Caster-300/260/220 x 2200 mm

• India's only Multi-Radii Bloom Caster operational at Salem works

• ZERO EFFLUENT discharge for greener & cleaner environment

• 1.6 million trees planted at Vijayanagar works, transforming the area into a green oasis

• India’s largest Long Steel producer by installed capacity

SettingBenchmarks

Steel Melting Shop

Blast Furnace - IV

10 11

12 1312

Widest Hot Strip mill in India

14 15

ManufacturingFacilities

JSW Hot Rolled Products

Vijayanagar Works

The Vijayanagar plant of JSW Steel is the first

integrated steel plant to reach 10 MTPA

capacity at a single location in India.

It is the first plant in India to use

the Corex technology for

hot metal production.

The first Hot Strip Mill at

Vijayanagar was

commissioned in 1997.

Since then it has grown

exponentially and now has an installed

capacity to produce 10 MTPA of steel.

Located 380 kms from

Bangalore in Toranagallu, North Karnataka -

a part of the Bellary-Hospet iron ore belt - it is

a fully integrated steel plant well-connected

with both Goa and Chennai ports.

Dolvi Works

Located on the West coast of India, the plant has a jetty that can handle a capacity of 10 million tonnes

per annum. This provides the unit with logistical advantages in importing raw materials and exporting

finished products. Located around 80 kms from Mumbai, the unit is well connected via rail, road and

sea and has given JSW Steel a strategic presence in Western India.

The Dolvi Steel Plant caters to several industries including automotive, infrastructure, construction,

machinery, LPG cylinder-manufacturers cold rollers, the oil and gas sectors and consumer durables.

JSW Steel manufactures superlative Hot Rolled (HR) coils at its Hot Strip Mills (HSM), situated at Vijayanagar,

Karnataka and at Dolvi, Maharashtra. The production of these coils involves the use of state-of-the-art equipment

and manufacturing processes that ensure products of the highest quality. At Vijayanagar, HSM-I has commis-

sioned capacity of 3 MTPA and HSM-II has commissioned capacity of 5 MTPA, equipped with sizing presses and

an automatic line inspection facility. It is the widest Hot Strip Mill in India, capable of rolling upto 2150 mm. JSW

Steel’s Dolvi unit in Maharastra has commissioned capacity of 3.6 MTPA . The Dolvi unit HSM uses a combination

of the advanced Conarc Process and Thin Slab Casting technology, which facilitates the production of HR coils

which are superior in quality due to their thinner gauges and finer surface quality. The convenient coastal location

of the Dolvi unit allows easy access to the plant and makes the import and export of raw materials and finished

goods extremely efficient.

1716

Vijayanagar

Dolvi

18 19

• KR Process and Co-injection Technology for production of ultra low Sulphur Steel• Low levels of dissolved Oxygen & Hydrogen:- RH-OB Process• Clean Steel with low NMI (Non Metallic Inclusions):- Combined Blowing, Sublance System, DART System, Inclusion Morphology Modification, Full Shrouding System, Tundish Furniture, Vertical Bend Caster, Mold Fluid Flow• Minimum Segregation: Dynamic Soft Reduction Technology• Close Dimensional Tolerances: Automatic Profile Control Model• High Strength and Dual Phase Steel (Plain Carbon & Low Alloy) depending on customer requirements• Flatness/Shape in Cut To Length Form: Automatic Flatness Control Model at HSM and Robust Leveling System in Cut to Length Line

• Expertise in Hot Metal Operation without mixer & Desulphurisation units• Casting speed of 11 mtr/min in two casters - benchmark in the world• Thin Slab Casters• Direct Rolling without any preheating of the slab• Hydraulic Auto Gauge Control & PCFC for Profile Control• Raw Material to Hot Rolled Coil in 222 minutes

Advantages JSW Manufacturing ProcessVijayanagar Works

Vijayanagar Works

Dolvi Works

Dolvi Works

Des

ulp

har

isat

ion

Uni

tB

asic

Oxy

gen

Furn

ace

Lad

le H

eati

ng F

urna

ceS

lab

Cas

ter

Hot

Str

ip M

ill

Cut

to

leng

th

HR

Coi

ls

HR

Sh

eets

Bla

st F

urna

ceC

orex

Sint

erin

gCo

ke O

ven

Non

-Cok

ing

Coal

Iron

Ore

Fin

esFl

uxes

Coki

ng C

oal Iron

Ore

Fi

nes

Lim

esto

ne

Bla

st F

urna

ce

Lad

le H

eati

ng F

urna

ceC

onti

nuou

sca

stin

gEl

ectr

ic A

rc F

urna

ce

Cok

e O

ven

Coal

Coa

l inj

ecti

on

Coa

l by

Pro

duc

e

Pig

Iron

Cas

ting

Dire

ct re

duc

tion

Nat

ural

Gas

Hot

Str

ip M

ill

Cut

to

leng

th

HR

Coi

ls

HR

Sh

eets

2120

Product Capabilities

Vijayanagar

Width Tolerance

Thickness Tolerance

Tongue/fish Tail

Packing

Width upto 1500mm: - 0/+ 20 mm for95% of coil length (for balance 5% in

Head end and +25 mm max).Width >1500mm: - 0/+ 25 mm for 95%of coil length (for balance 5% in Head

end and +30 mm max).

Up to 6 mm thickness 3/4th EN for 95%coil length (balance coil length is full

EN 10051) and for > 6 mm thickness 6%of thickness for 95% of coil length

(balance coil length is full EN 10051).

80% of coils 500 mm max eachend and 20% coils 1000mm max

or as agreed.

800mm Max (500mm Head end,500mm Tail end)

1.2-1.3mm = +/- 0.030mm, 1.31-1.40mm = +/- 0.050mm, 1.41-4.00mm = +/- 0.075mm, > 4 - 10 mm

= +/- 0.10mm, > 10 mm +/- 1%thk

Parameter Dolvi Vijayanagar

Grades

762 (+/- 40) mm

2100 mm Max

Mill Edge

As Per Standards/Customized(Approx Max 620Mpa)

Thickness (mm) 1.4 - 25.4 Mm 1.2 - 25 Mm

762 (+/- 20) mm

1800mm Max

Mill Edge

As Per Standards/Customized

900 - 2100 Mm 900 - 1550 MmWidth (mm)

Coil ID

Coil OD

Edge

YS/UTS (Mpa)

Re-rolling Grades, Drawing & PressForming Grades includes HSLA

grades, Tube and Pipe/ FormingGrades, Structural General

Engineering/Tube/ Forming Gradesand Chequered Grade, High TensileGeneral Engineering/Tube/ FormingGrades, LPG/Low Pressure VesselGrades, Medium Carbon Grades,

Weather Resistance Grades & LinePipe Grades

Auto, Line pipe (Oil & Gas), ColdRolled, Pipes & Tubes, Projects &

Construction, LPG, Machinery

+15/-0mm

As Agreed1-2 Circumferential and 2 to 4

bands through the eye or as agreed

Testing Facilities

Chemical Composition

Impact Energy

Bend Test

Cupping Value

Drop Weight Tear Test

Microstructure

Internal Cleanliness Macro Etching and S Printing

Metallurgical Microscope with Image Analyzer

DWTT m/c - 30,000J

Bending and folding m/c - 100T

Computerized UTM 10T/25T/30T/60T/120T

Vickers/Rockwell Hardness Tester

Impact Testing m/c - (BSEN 450J/ASTM600J)

Tensile Properties

Hardness

Optical Emission SpectrometerOxygen, Hydrogen & Nitrogen Analyzer

Parameter Equipment

Hydraulic Erichsen Cupping Tester

NOTE:

• Thickness Tolerance, Width Tolerance, Flatness Tolerance and Camber Tolerance shall be as per standards appli

cable (JIS, EN, ASTM, IS, ISO etc)

• For the steel sheet and the regular portion of the steel coil, measurement of thickness shall be made at any point

not less than 40mm from both side edges

• The tolerances do not apply to the head end and tail end of the coils (irregular/uncropped/ fish tail or tongue

portion)

• Either plus or minus side of the thickness tolerances given in tables may be limited on request. The total

tolerances in this case shall be equal to those given in the table

• Closer Tolerances can be accepted on mutual agreement

22 23

Packing standard for Hot Rolled Coils

Hot RolledCut to Length

Domestic 215032 or as agreed(with ID Steel Ring for nominalthickness up to 2.6mm)

1.4 25.4 900

Export & API 1.6 25.4 900

43 or as agreed(with ID Steel Ring for nominalthickness up to 2.6mm)

Customer

Type

Bare Steel Strapping

(2 digit Numeric code)

First Digit: Eye strap

Second Digit: Circum strap

Thickness

minimum

mm

Thickness

maximum

mm

Width

minimum

mm

Width

maximum

mm

2150

Edge Protector(on request)Sticker / Marking

+ Customer name+ Destination+ Size+ Grade+ Coil No+ Heat No+ Bundle No

Steel Straps

ID ring / sleeve(on request)

Steel Straps

Edge Protector(on request)

Sticker / Marking+ Customer name+ Destination+ Size+ Grade+ Bundle weight+ Heat No+ Bundle No

Wooden Blocks(on request)

Products are packed according to the requirement and typical Hot Rolled coil packing is displayed below

HR Packing

Marking of Hot Rolled Coils

Two labels, one on ID of the coil and the other on OD of

the coil will have the following details. Manufacturer

Name, Customer Name, Coil No., Heat No., Size (T x W

in mm), Grade, Coil Weight. Typical Adhesive Label

(refer to the adjacent figure)

Note: Packing and Marking are mutually agreed based

on customer requirements.

Product Specification

Product RangeCTL 5

Minimum

8 61.2 2.5

900 900 9001600

1500 1000 100013000

10

2050

13000

350000 170000

900

1100

550

900

25000

25.4

2050

12000

6 15 15

Maximum Minimum Maximum Minimum Maximum

CTL 6 CTL 7

Thickness (mm)

Width (mm)

Length (mm)

Bundle Weight (tons)

Capacity (Tons/annum)

Yield Strength

Tensile Strength

1) YS: ≤450Mpa &TS: ≤590Mpa

(8.0-25.4mm) x (900-2050mm)

2) YS: 450-600Mpa &TS: 590-800Mpa

(8.0-20.0mm) x (1000-2050mm)

(20-22.0mm) x (1000-1600mm)

2524

Vijayanagar WorksProduct Specification

26 27

Product Range

Product CapabilitiesProduct/Grade HSM-2HSM-1

Cold Rolling/Welded Tube

Plain Carbon Structural

Medium Carbon Grade

High Tensile Grades (Fe 510)

igh Tensile Grades (Fe 590)

API PSL 2 Grades

Low Carbon, EDD, IF Steel

Dual Phase Steel / TRIP Steel –

X42 / X46 /X52 / X56

(4.0-8.0) x (900-1250) (4.0-6.0) x (1000-1500)(6.0-25.4) x (1000-2000)

(4.0-8.0) x (1000-1500)(8.0-25.4) x (900-2000)

(4.0-8.0) x (1000-1500)(8.0-25.4) x (900-2000)

(1.6-1.8) x (900-1250)≥3.0 x (900-2100)

(3.0-5.0) x (900-1500)(5.0-6.5) x (900-1800)

6.0-8.0) x (900-1500)(8.0-18.0) x (900-2000)(18.0-25.4) x (900-1600)

(6.0-12.0) x (900-1250)

(7.0-12.0) x (900-1250)

1.6/1.8 x (900-1050)(2.0-3.0) x (900-1280)

≥3.0 x (900-1320)

1.6/1.8 x 900(2.0-2.8) x (900-1100)

≥2.8 x (900-1250)

(2.2-3.5) x (900-1000)(3.5-6.0) x (900-1150)

≥2.0 x (900-1300)for Low Carbon

(2.5-3.0) x (900-1000)(3.0-4.0) x (900-1100)

≥4.0 x (900-1250)

(2.2-3.5) x (900-1250)(3.5-6.0) x (900-1400)

1.4/1.8 x (900-1250)(2.0-4.0) x (900-1500)

(4.0-25.0) x (900-2100)

(1.4-2.0) x (900-1250)(2.0-3.0) x (900-1500)

≥3.0 x (900-2100)

X60 / X65X60 / X65

X70

X80 –

(3.2-4.5) x (900-950)

(1.6-2.0) x (900-1200)(2.0-3.0) x (900-1250)(3.0-6.0) x (900-1500)

(6.0-25.0) x (900-2100)

(2.0-2.5) x (900-1200)(2.5-4.0) x (900-1250)(4.0-6.0) x (900-1500)

(6.0-25.0) x (900-2100/2000)

2928

S 11513 Grade D

SAE J403

EN 10111

IS 11513

SAE J403

EN 10111

EN 10111

EN 10111

IS 11513

IS 11513

IS 11513

IS 11513

SAE J403

Minimum Maximum

CTL 7

Standard Specification Chemical Composition (%)

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Micro alloys

max

Al

SAE J403

SAE J403

SAE J403

IS 11513

IS 11513

SAE J403

SAE J403

SAE J403

1010

Dd11

Grade DD

1008

Dd12

DP13

Dp14

Grade DD + B

Grade EDD

Grade EDD + B

Grade O

1005

1006

10B05

10B06

Grade H

Grade MA

1012

1015

1018

0.10

0.08

0.08

0.08

0.15

0.06

0.08

0.06

0.08

0.25

0.12

0.08-0.13

0.12

0.10

0.10

0.08

0.10

0.16

0.10-0.15

0.13-0.18

0.15-0.20

0.45

0.40

0.40

0.40

0.60

0.35

0.25-0.40

0.35

0.25 - 0.40

1.70

0.50

0.30-0.60

0.60

0.45

0.30-0.50

0.35

0.45

1.60

0.30-0.60

0.30-0.60

0.60-0.90

0.035

0.030

0.025

0.025

0.040

0.050

0.050

0.050

0.050

0.045

0.035 0.035

0.050

0.045

0.030

0.050

0.025

0.030

0.025

0.050

0.050

0.050

0.035

0.030

0.025

0.025

0.040

0.030

0.030

0.030

0.030

0.050

0.030

0.045

0.030

0.030

0.025

0.030

0.025

0.030

0.030

0.030

0.02 min

0.02 min

0.02 min

0.02 min

0.02 min 0.012

0.012

0.012

0.012

0.012 B: 15-50ppm

B: 15-50ppm

B: 8-40ppm

B: 8-40ppm

0.20

0.012

0.012

0.012

0.02 min

0.02 min

0.02 min

Re-rolling (CRCA & Galvanising applications)

Electrical stampings and forming

IS 1079 HR1

IS 1079

IS 1079

CTL 7

Standard Specification Chemical Composition (%)

EquivalentSpecification Grade

Cmax

Mnmax

Smax

Pmax

Simax

Nmax

CEmax

Micro alloysmaxAl

HR2

HR3

0.15

0.10

0.08

0.60

0.45

0.40

0.035 0.050 0.35

0.35

0.35

0.035

0.030

0.040

0.035

0.015 max

0.015 max

0.015 max

0.012

0.012

0.012

SAE J403 1026

JIS G4051

SAE J403

SAE J403

JIS G4051

SAE J403

SAE J403

JIS G4051

SAE J403

SAE J403

SAE J403

Minimum Maximum

CTL 7

Standard Specification Chemical Composition (%)

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

Cr

max

CE

max

Micro alloys

max

Al

SAE J403

JIS G4051

JIS G4051

JIS G4051

SAE J403

SAE J403

JIS G4051

SAE J403

S28C

1030

1030 Mod

S30C

1035

1040

(Mc11)

1536

S35C

1541

1045

1040

(Mc11)

1042

S40C

S50C

(Mc12)

1060

S55C

S45C

1050

1055

0.32-0.38

0.32-0.38

0.36-0.44

0.43-0.50

0.37-0.44

0.40-0.47

0.37-0.43

0.47-0.53

0.22-0.28

0.25-0.31

0.28-0.34

0.26-0.34

0.27-0.33

0.30-0.37

0.52-0.58

0.55-0.65

0.42-0.48

0.48-0.55

0.50-0.60

0.60-0.90

0.60-0.90

1.35-1.65

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

1.20-1.50

0.60-0.90

1.20-1.50

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.60-0.90

0.050

0.030

0.050

0.050

0.050

0.050

0.030

0.030

0.050 0.030

0.030

0.050

0.050

0.030

0.050

0.030

0.050

0.050

0.030

0.050

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.030

0.15-0.35

0.15-0.35

0.15-0.35

0.15-0.35

0.15-0.35

0.15-0.35

0.15-0.35

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.30

0.30

0.20

0.20

0.20

0.20

0.20

Medium carbon grades

30 31

Structural, general engineering and forming

IS 5986 Grade 235(Fe360)

EN 10025

EN 10025

EN 10025

ASTM A1011

ASTM A1018

ASTM A1018

IS 2062

IS 2062

ASTM A1011

IS 2062

IS 2062

IS 5986

EN 10025

JIS G3101

JIS G3106

JIS G3106

JIS G3106

ASTM A572

ASTM A36

ASTM A1018

IS 2062

IS 2062

IS 2062

IS 2062

IS 5986

EN 10025

EN 10025

ASTM A1011

ASTM A1011

S235JR

S235J0

E250BR

E250B0

E250A

SS Grade 40

SS Grade 40

SS Grade36 Type1SS Grade36 Type1

0.20

SM400C

S275JR

SS400

SM400B

SM400A

Grade 42

E275A

E275BR

E275B0

E275C

Grade 325

S235J2

E250C

S275J0

S275J2

A36

SS Grade36 Type2

SS Grade36 Type2

SS Grade45

0.25

0.22

0.25

Grade 255(Fe410)

0.18

0.23

0.22

0.23

0.20

0.18

0.25

0.25

0.25

0.21

0.17

0.17

0.17

0.17

0.20

0.25

0.25

0.23

0.22

0.22

0.20

0.20

0.25

0.21

0.90

1.50

0.90

1.50

1.30

1.40

1.50

1.50

2.5xC mi

0.60-1.40

1.00

1.40

1.40

1.40

1.50

1.50

1.50

1.50

1.50

1.50

1.30

1.50

1.50

1.50

t≥20: 0.8-1.20

1.35

1.35

1.35

0.025 0.025

0.040

0.040

0.040

0.040

0.035

0.045

0.045

0.045

0.045 0.045

0.045

0.045

0.045

0.045

0.040

0.040

0.040

0.040

0.050 0.050

0.050

0.025

0.040 0.040

0.040

0.040

0.045

0.045

0.045

0.040

0.040

0.040

0.040

0.040

0.040

0.040

0.040

0.035 0.035

0.035 0.035

0.035 0.035

0.035 0.035

0.035 0.035

0.030

0.40

0.40

0.40

0.40

0.040

0.040

0.040

0.035

0.030 0.030

0.050

0.35

0.35

0.40

0.40

0.030

0.25

0.25

0.25

0.25

0.20

0.040

0.040

0.025

0.035

0.035

0.035

t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225

t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225

t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225t≤16: 235 t≥16: 225

t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240

t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240

t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240

t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240

t≤16: 245 t≥16: 235t≤16: 245 t≥16: 235

t≤16: 275 t≥16: 265t≤16: 275 t≥16: 265

t≤16: 245 t≥16: 235t≤16: 245 t≥16: 235t≤16: 245 t≥16: 235t≤16: 245 t≥16: 235

0.012 0.20

0.25

0.25

0.25

0.25

0.20

0.012

0.012

Ti: 0.025

Ti: 0.025

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

L

T

L

L

L

L

L

L

L

L

L

L

L

T

T

T

0.014

Ti: 0.025

Ti: 0.025

Ti: 0.025

Ti: 0.025

255

Type1/2/3 or 5

0.43

0.42

0.41

0.39

0.42

250

290

250

310

250

t≤20: 275 t≥20: 265

t≤20: 275 t≥20: 265

t≤20: 275 t≥20: 265

t≤20: 275 t≥20: 265

325

0.014

0.012

0.012

0.012

0.012

0.012

0.012

0.012

0.014

0.012

0.012

0.012

0.012

0.012

235

250

250

275

275

Equivalent

Specification GradeC

max

Mn

max

S

max

P

maxSi

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

max

Al

Standard Specification Chemical Composition (%)

t≤16: 275 t≥16: 265t≤16: 275 t≥16: 265t≤16: 275 t≥16: 265t≤16: 275 t≥16: 265t≤16: 275 t≥16: 265t≤16: 275 t≥16: 2650.18

1.35

0.040

0.040

Ti: 0.025

0.35

0.42

0.41

0.41

0.39

0.42

0.40

0.40

0.40

L 1.6≤t≤2.5: 212.5≤t≤6: 22

2.5≤t≤6: 211.6≤t≤2.5: 18

2.5≤t≤6: 19t≥6: 21

t≥6: 21t≥6: 21t≥6: 211.6≤t≤2.5: 20 2.5≤t≤6: 21

360-470

t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510

t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510

365

410

410

365

380

380

410-520

410

410

400-510

400-510

400-510

400-510

400-550

400-550

400-550

415

410

430

430

430

430

420-530

t≤5: 21

t≤5: 23

t≤5: 23

t≤5: 23

1.6≤t≤2.5: 20

t≥6: 19

21

22

t≤3: 17

1.5≤t≤2: 15 2≤t≤2.5: 162.5≤t<3: 171.5≤t≤2: 15 2≤t≤2.5: 162.5≤t≤3: 171.5≤t≤2: 15 2≤t≤2.5: 162.5≤t≤3: 17

2.5≤t≤6: 19t≥6: 21

1.5≤t≤2: 172≤t≤2.5: 182.5≤t≤3: 19

1.5≤t≤2: 172≤t≤2.5: 182.5≤t≤3: 19

1.5≤t≤2: 172≤t≤2.5: 182.5≤t≤3: 19

-

t≥3: 26 t≤12: t t≥12: 2t

20 27

27

27

27

27

27

27

27

27

27

27

27

47

0

-20

1.5t

2t

23

23

t≥3: 21

2t

2t

2t

t≥3: 24t≥3:24t≥3: 24

t≥3: 24t≥3:24t≥3: 24

t≥3: 24t≥3:24t≥3: 24

t≥3: 24

1.5t2t

22

t≥3: 19 t≤12: 2t t≥12: 3t

22

22

22

t≥3: 21

t≥3: 21

1.5t

2t

2t

2t

2t

2t

2t

2t

2t

Room Temp

0

-20

t≤12: t t≥12: 2t

0

0

0

20

-20

-20

0

Room Temp

UTS (Mpa)

min

t≤3: 430-580 t≥3: 410-560t≤3: 430-580 t≥3: 410-560t≤3: 430-580 t≥3: 410-560t≤3: 430-580 t≥3: 410-560

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510t≤3: 360-510 t≥3: 360-510

t≤3: 430-580 t≥3: 410-560t≤3: 430-580 t≥3: 410-560

23

23

2t

2t

2t

1t

1t

1t

32 33

IS 3502 E250A

EN 10025

ASTM A36

S275JR

A36

0.23

0.21

0.25

1.50

1.50

0.045 0.045 0.40

0.40

0.035 0.035

0.050

0.42

0.40

0.040

0.012 0.25

0.012

Equivalent

Specification GradeC

max

Mn

max

S

max

P

maxSi

max

N

max

CE

max

Micro alloys

max

Al

Standard SpecificationStandard Specification Chemical Composition (%)

T 250 410 23

21410-560

400-550

275

250

T

T

20 27

Tensile

Test

Direction

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

YS (Mpa)

minUTS (Mpa) Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

2t

IRS-M41/97

IS 2062

JIS G3125

EN 10025

EN 10025

ASTM

E250BR

0.12

S355J2WP

SPA-H

S355J0WP

NA

Corten A

0.1

0.12

0.22

0.12

0.12

0.25 - 0.45

0.20-0.50

1.50

1

1

0.20-0.50 0.25-0.75

0.25-0.75

0.75

0.75

0.045

0.030

0.040

0.045

0.075-0.14

0.07-0.15

0.28-0.72

0.040

0.035 .06-0.15

0.035 .06-0.15

0.030 0.01-0.20

t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240t≤20: 250 t≥20: 240

0.25

0.009

0.009

T0.012

0.08 max

0.02 min

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

maxCE

max

Micro alloys

maxAl

Standard Specification Chemical Composition (%)

Cr: 0.35-0.60Cu: 0.30-0.60Ni: 0.20 - 0.47V: 0.05, Nb: 0.04

Cr: 0.30-1.25Cu: 0.25-0.55Ni: 0.65

Cr: 0.30-1.25Cu: 0.25-0.55Ni: 0.65

Cr: 0.50-1.25Cu: 0.25-0.55Ni: 0.65, V: 0.05

Cr: 0.30-1.25Cu: 0.25-0.60Ni: 0.65

340

T

T

t≤6: 345t≥6: 355

t≤6: 480t≥6: 490

355

355

340

t≤3: 510-680t≥3: 470-630

t≤3: 510-680t≥3: 470-630

480

t≤6: 22

27

27

27

1.5≤t≤2: 142≤t≤2.5: 152.5≤t≤3: 16

1.5≤t≤2: 142≤t≤2.5: 152.5≤t≤3: 16

t≥6: 15

t≥3: 20

t≥3: 20

t≤6: 0.5tt≥6: 1.5t

22

2t

2t 0

-20

1t

Tensile

Test

Direction

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 50mm%El (min)

GL: 80mm

%El (min)

GL: 5.65 √ (A)YS (Mpa)

min

UTS (Mpa) Bend

(180 deg)Temp ºC Impact

(J) min

480

Chequered sheets and plates for structural use

Atmoshpheric corrosion resistance applications

34 35

High tensile structural and forming applications

IS 2062 E300A

IS 2062

IS 2062

IS 2062

IS 5986

ASTM A572

IS 2062

IS 2062

ASTM A1011

IS 2062

IS 2062

ASTM A1011

ASTM A572

IS 2062

IS 2062

IS 5986

JIS G3101

ASTM A572

IS 2062

EN 10025

EN 10025

IS 2062

IS 2062

E300BR

E300B0

E350B0

E350C

E350BR

SS Grade50

E350A

Grade 355

Grade 50

SS Grade 55

Grade 490

SS540

Grade 60

E450A

E450BR

Grade 65

IS 2062

ASTM A572

E300C

S355J2

S355K2

Grade 55

E410A

E410B0

E410C

E410BR

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.20

0.23 or 0.20

0.25 or0.22

0.26 or 0.20

0.22

0.22

0.26 or 0.23

0.20

0.20

1.50

1.55

1.35 or1.50

1.55

1.55

1.55

1.60

1.60

1.50

1.50

1.50

1.50

1.35 or 1.50

1.50

1.35 or 1.60

1.65

1.65

1.35 or 1.65

1.35 or 1.60

1.35 or 1.50

1.60

1.60

1.60

0.035

0.050

0.040

0.045 0.045

0.045

0.045

0.040 0.040

0.050 0.050

0.040

0.045

0.050

0.045

0.045 0.045

0.045 0.045

0.040

0.050

0.045

0.045

0.045

0.040 0.040

0.045

0.045

0.045

0.45

0.45

0.45

0.45

0.40

0.45

0.45

0.45

0.45

0.55

0.55

0.035

0.045

0.045

0.040

0.035

0.025 0.025

0.40

0.45

0.45

0.40

0.030

0.040

0.050

0.045

0.025 0.025

0.045 0.045

0.40

0.45

0.45

0.45

0.45

0.20

0.25

0.25

0.035

0.040

0.040

0.035

0.012 0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.012

0.012

0.012

0.012

Ti: 0.025

0.25

0.25

0.25

0.25

0.20

Type1/2/3 or 5

Ti: 0.025

0.25

Type1/2/3 or 5

Type1/2/3 or 5

Type1/2/3 or 5

0.012

0.012

0.012

0.012

0.20

0.20

0.012

0.012

0.012

0.012

0.012

0.012

0.012

Equivalent

Specification GradeC

max

Mn

max

S

max

P

maxSi

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

max

Al

Standard Specification Chemical Composition (%)

t≤20: 350 t≥20: 330

t≤20: 350 t≥20: 330

t≤20: 350 t≥20: 330

380

t≤20: 410 t≥20: 390

t≤20: 410 t≥20: 390

t≤20: 410 t≥20: 390

t≤20: 410 t≥20: 390

490

t≤16: 400 t≥16: 390

415

t≤20: 450 t≥20: 430

t≤20: 450 t≥20: 430

450

t≤20: 300t≥20: 290

t≤20: 300t≥20: 290

t≤20: 300t≥20: 290

t≤20: 300t≥20: 290

355

250

275

t≤20: 350 t≥20: 330

t≤16: 355 t≥16: 345

t≤16: 355 t≥16: 345

3800.25 or 0.20

0.25 or 0.22

1.60

0.045

0.040

0.20

0.44

0.44

0.44

0.44

0.45

0.5

0.5

0.5

0.5

0.45

0.52

0.52

0.47

0.47

0.47

0.45

0.45

0.45

JIS G3101 SS490 0.050 0.050 0.20 t≤16: 285 t≥16: 275T

T

T

T

L

T

T

T

T

T

T

T

IS 5986 Grade 420 0.20 1.50 0.035 0.035 0.200.012 4200.45 T

T

T

T

T

T

JIS G3106 SM490B 0.18 1.60 0.550.035 0.035 0.20 t≤16: 325 t≥16: 315T

JIS G3106 0.20SM490A 1.60 0.550.035 0.035 0.20 t≤16: 325 t≥16: 315T

JIS G3106 SM490C 0.18 1.60 0.550.035 0.035 0.20 t≤16: 325 t≥16: 315T

EN 10025 S355JR 0.24 1.60 0.550.035 0.035 0.012 1) With out MA or2) MA: 0.201 t≤16: 355 t≥16: 3450.45 T

EN 10025 0.20S355J0 1.60 0.550.030 0.030 0.012 0.20 t≤16: 355 t≥16: 3450.45 T

T

T

T

T

T

L

T

T

T

T

19

15

t≤5: 16

440

440

440

420-530

490

480-590

450

450

490

490-610

490

490

490-610

490-610

490-610

t≤3: 510-680t≥3: 470-630

485

540

540

480

540

540

540-650

540

520

570

570

550

t≤5: 19

t≤5: 22

t≤5: 22

t≤5: 22

1.6≤t≤2.5: 162.5≤t≤6: 17

18

1.6≤t≤2.5: 142.5≤t≤6: 15

1.5≤t≤2: 14 2≤t≤2.5: 152.5≤t≤3: 16

1.5≤t≤2: 14 2≤t≤2.5: 152.5≤t≤3: 16

1.5≤t≤2: 14 2≤t≤2.5: 152.5≤t≤3: 16

1.5≤t≤2: 14 2≤t≤2.5: 152.5≤t≤3: 16

22 2t

2t

2t

2t

27

27

27

27

27

27

47

27

27

27

40

20

25

25

25

27

0

-20

20

20

20

20

20

20

t≥3: 12

t≥3: 20t≥3: 20

t≥3: 20t≥3: 20

t≥3: 20t≥3: 20

t≥3: 20t≥3: 20

t ≤12: 2tt ≥12: 3t

Room Temp

Room Temp

0

t≥3: 15

0

0

0

20

-20

-20

-20

Room Temp

Room Temp

UTS (Mpa)

min

t≤3: 510-680t≥3: 470-630

t≤3: 510-680t≥3: 470-630

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

440

t≤3: 510-680t≥3: 470-630

2.5t

2.5t

22

22

22

22

22

22

22

2.5t

2t

2t

2t

2t

t ≤12: 2tt ≥12: 3tt

2t

2t

2t

2t

2t

2t

2t

2t

2t -20

0

2t

3t

t≥3: 18 t ≤12: 2tt ≥12: 3tt

3736

Simple pressure vessels

ASTM A285 Grade A

ASTM A285

IS 6240

IS 15914

EN 10120

ASTM A285

JIS G3116

JIS G3116

IS 15914

IS 15914

IS 15914

EN 10120

JIS G3116

Grade B

Grade 1

HS 235

P245NB

Sg325

HS 345

SG295

HS 295

SG255

P265NB

Grade C

HS 265

0.20

0.20

0.20

0.20

0.17

0.22

0.16

0.16

0.28

0.19

0.18

0.16

0.19

0.30 min

0.50 min

1.00

0.70 min

1.50

0.90

0.90

0.30 min

0.30 min

0.90

0.40 min

0.40 min

0.30 min

0.035 0.035

0.025 0.025

0.025

0.025 0.025 0.25

0.25

0.25

0.25

0.35

0.35

0.30

0.025 0.025

0.025

0.030 0.030

0.015

0.025 0.025

0.030 0.030

0.030 0.030

0.025 0.025

0.035 0.035

0.045

0.055

0.035 0.035

0.015

0.009 0.10

0.10

0.10

0.10

0.10

0.08

0.08

0.009

0.009

0.009

0.009

0.009

0.009

0.02 min

0.015 min

0.015 min

0.015 min

0.020 min

0.020 min

0.020 min

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

maxCE

max

Micro alloys

max

Al

Standard Specification Chemical Composition (%)

T

T

T

T

T

T

T

T

T

T

L

L

L

165

185

240

235

245

205

265

265

295

345

255

295

325

310-450

345-485

350-450

360-460

360-450

380-515

410-510

410-500

450-560

490-610

400

440

490

30

1t

1t

1.5t

1.5t

13.525

25

3≤t≤5: 34

22

3≤t≤5: 32

20

18

28

26

28

27

Tensile Test

Direction

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 50mm

YS (Mpa)

minUTS (Mpa)

min

%El (min)

GL: 80mm

%El (min)

GL: 5.65 √ (A)Bend

(180 deg)

ECV (mm)

min

22

t≤3: 26

t≤3: 24

Boiler tubes and pressure vessels

415-550 25

25

23

22

22

23

21

21

415-550

440-590

450-585

450-585

485-620

485-620

T

T

T

T

T

T

T

T

T

T

210 330

360-480

360-480

410-530

t≤16: 235

t≤16: 235t≥16: 225

t≤16: 265

220

220

t≤275

240

240

260

260

2≤t≤2.5: 202.5≤t≤3: 21 t≥3: 26t

28

24

20 40

T 410-530t≤16: 255t≥16: 265

2≤t≤2.5: 172.5≤t≤3: 18 t≥3: 22t -20 28

20 40

-20 28

20 31

21

Tensile Test

Direction

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 50mmYS (Mpa)

min

UTS (Mpa)

min%El (min)

GL: 80mm%El (min)

GL: 5.65 √ (A)

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

T

IS 10748

EN 10207

EN 10207

EN 10028

ASTM A516

ASTM A515

ASTM A515

ASTM A516

ASTM A515

ASTM A516

ASTM A178

EN 10028

P235S

P235GHEN 10028

Grade 2

16Mo3

16Mo3

Grade 65

Grade 65

Grade 70

Grade 70

Grade A

P265GH

P265S

Grade 60

Grade 60

0.16

0.16

0.20

0.20

0.24

0.21

0.12-0.20

0.28

0.24

0.31

0.27

0.12-0.20

0.12

0.40-1.20

0.40-1.20

0.40-0.90

0.90

0.85-1.20

1.20

0.85-1.20

0.60

0.27-0.63

0.60-1.40

0.50-1.50

0.90

0.60-0.90/0.85-1.20

0.40-0.80

0.035

0.010 0.025

0.035 0.035

0.035

0.035

0.035

0.035

0.035

0.035

0.025 0.025

0.015

0.040 0.040

0.0250.015

0.0250.025

0.15-0.40

0.15-0.40

0.10-0.35

0.15-0.40

0.35

0.15-0.40

0.15-0.40

0.15-0.40

0.040 0.040

0.035

0.035

0.035

0.035 0.035

0.40 0.020 min

0.02 min0.40

0.025

0.035

0.035

0.07

Mo: 0.25-0.35,Cr, Cu & Ni: 0.30

0.020 min

0.012

0.012

0.012

0.012

0.02 min

0.02 max

Equivalent

Specification Grade

C

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Micro alloys

max

Al

Standard Specification Chemical Composition (%)

0.06-0.18

0.20

38 39

Notes

1 When the steel is aluminium killed, the total aluminium content shall not be less than 0.02 percent.

When the steel is silicon killed, the silicon content shall not be less than 0.10 percent. When the steel

is aluminium silicon killed, the silicon content shall not be less than 0.03 percent and total aluminium

content shall not be less than 0.01 percent.

2 When copper bearing steel is required the copper content shall be between 0.20 and 0.35 percent.

3 Classes for the suitability of hot dip galvanizing (for guidance)

Class1 -≥ Si: 0.03 max and Si+2.5P: 0.09 max

Class2 -≥ Si: 0.35 max

Class3 -≥ Si: 0.14 - 0.25 and P: 0.035 max

4 Carbon Equivalent (CE) = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15

CE (PCM) = C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B

5 Customized composition and properties may be mutually agreed upon between the purchaser and

the supplier.

6 Project Orders technical parameters shall be mutually agreed based on the clients requirements

7 The values given here are indicative; however the final will be as per standard requirements or mutual agree

ment.

Line pipes and casing & tubing

245-450 415-655 0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

0.93

290-495 415-655

320-525 435-655

360-530 460-760

390-545 490-760

415-565 520-760

450-600 535-760

485-635 570-760

555-705 625-825

379-552 517

0 40

40

40

40

50

50

50

55

70

70

HV 248

HV 248

HV 248

HV 248

HV 248

HV 248

HV 248

HV 248

HV 248

HV 248

0

0

0

0

0

0

0

0

0

YS (Mpa)

min

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

YS/UTS

max

UTS (Mpa)

min %El (min)

GL: 50.8mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

Hardness

max

2t

2t

2t

2t

2t

2t

2t

3t

3t

2t

API 5L Gr BM

API 5L

API 5L

API 5L

API 5L

API 5L

API 5L

API 5L

API 5L

API 5CT

X 42M

X 46M

X 52M

X 60M

X 65M

X 70M

X 80M

J55

X 56M

0.22

0.22

0.22

0.22

0.22

0.12

0.12

0.12

0.12

1.2

1.3

1.3

1.4

1.4

1.6

1.6

1.7

1.85

0.015

0.015

0.015

0.015

0.015

0.015

0.015

0.015

0.04 0.04

0.015 0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.45

0.45

0.45

0.45

0.45

0.45

0.45

0.45

0.45

0.015

0.015

0.015

0.015

0.015

0.015

0.015

0.05 0.05

0.05 0.05

0.05 0.05

0.040

0.040

0.040

Cr: 0.4, Mo: 0.25

Cr: 0.4, Mo: 0.25

Cr: 0.3

Cr: 0.3

0.43 0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.25

0.43

0.43

0.43

0.43

0.43

0.43

0.43

0.43

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

V

max

Nb

max

Ti

maxCE(IIW)

max

Others

max

CE (pcm)

maxAl

Standard Specification Chemical Composition (%)

EN 10132

JIS G4105

JIS G4105

JIS G4105

EN 10083

SAE J404

SAE J404EN 10083

SAE J403

SAE J403

EN 10083

SAE J404

EN 10083

SAE J403

6150

58CrV4

16MnCr5

51CrV4

50CrV4

15Cr3

4135

15B22

26MnB5

15B26

30MnB5

8620

SCM415

SCM435

SCM420

34CrMo4

20MnB5

22MnB5

15B21

0.48-0.53

0.14-0.19 1.00-1.30

0.40-0.60

0.70-1.10

0.12-0.18

0.45-0.55

0.47-0.55

0.13-0.18

0.18-0.23

0.30-0.37

0.17-0.23

0.18-0.23

0.33-0.38

0.19-0.24

0.23-0.28

0.27-0.33

0.18-0.23

0.22-0.29

0.19-0.25

0.55-0.62

0.70-0.90

0.70-1.10

0.70-1.10

0.60-0.85

0.60-0.85

0.60-0.85

1.10-1.40

1.10-1.40

1.10-1.40

1.10-1.40

1.10-1.40

1.10-1.40

0.70-0.90

1.15-1.45

0.030

0.035

0.030

0.035

0.035

0.035

0.0400.040

0.040

0.040

0.040

0.040

0.050

0.050

0.050

0.035

0.030

0.030

0.030

0.040

0.035 0.400.035

0.035

0.15-0.35

0.035

0.15-0.40

0.40

0.035 0.15-0.35

0.035

0.035

0.15-0.40

0.035

0.035

0.035

0.030

0.030

0.030

0.030

0.030

0.15-0.35

0.15-0.35

0.15-0.35

0.0300.040

0.15-0.350.40

0.40

0.40

0.40

0.15-0.35

V: 0.10-0.20

V: 0.10-0.25

V: 0.15min

B: 0.0008-0.005

B: 0.0005-0.003

B: 0.0008-0.005Ti: 0.025 max

B: 0.0005-0.003

B: 0.0005-0.003

B: 0.0008-0.005

B: 0.0008-0.005Ti: 0.05 max

0.80-1.10

0.50-0.80

0.90-1.20

0.90-1.20

0.80-1.10

0.90-1.20

0.90-1.20

0.90-1.20

0.90-1.20

0.90-1.200.80-1.10

0.35

0.35

0.30

0.30

0.40-0.60 0.40-0.70

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

Ni

max

Cu

max

Mo

max

Micro alloys

max

Cr

max

Al

V: 0.10-0.25

0.33-0.38

0.60-0.900.70-0.90

0.15-0.30

0.15-0.30

0.15-0.30

0.15-0.300.15-0.25

Alloyed steels

4140

Drawing & press forming

IS 1079 HR1

IS 5986

EN 10111

IS 1079

JIS G3131

EN 10111

ASTM A1011

EN 10111

IS 1079

ASTM A1011

JIS G3131

IS 1079

JIS G3131

SAE J403

EN 10111

IS 1079

IS 5986

JIS G3101

EN 10025

EN 10025

IS 5986

JIS G3113

EN 10025

Grade 165

DD11

SPHD

DD13

HR3

DS Type A

DS Type B

DD12

SS330

1012

DD14

Grade 205(Fe330)

HR0

S235J2

HR2

SPHC

HR4

Grade 235(Fe360)

SAPH370

S235JR

S235J0

0.10

0.02-0.08

SPHE

0.25

0.15

0.17

0.17

0.17

0.17

0.15

0.12

0.12

0.15

0.10

0.08

0.08

0.08

0.08

0.10

0.10

0.08

0.10-0.15

0.60

0.50

0.50

0.35

0.40

0.40

0.35

0.50

1.70

0.80

0.60

0.60

0.60

0.45

0.50

0.45

0.30-0.60

1.50

1.00

1.40

1.40

1.40

0.035 0.040

0.050

0.035

0.030

0.030

0.030

0.040

0.030

0.030

0.0250.025

0.035

0.035

0.025

0.050

0.040

0.035 0.050

0.050

0.020

0.035

0.040

0.030

0.030

0.030

0.025

0.035

0.020

0.040 0.040

0.045

0.0400.040

0.050 0.050

0.050 0.030

0.045

0.030

0.040 0.040

0.045

0.040

0.035

0.030

1.5≤t≤2: 170-3602≤t≤8: 170-340

1.5≤t≤2: 170-3302≤t≤8: 170-310

1.5≤t≤2: 170-3102≤t≤8: 170-290

t≤16: 205t≥16: 195

205

0.0120.02 min

0.02 min

0.20

Ti: 0.025B: 0.003

Ti: 0.025B: 0.003

Ti: 0.025B: 0.003

Ti: 0.025B: 0.003

Ti: 0.025B: 0.003

Ti: 0.025B: 0.003

0.012

0.012

T

T

T

T

T

T

T

T

T

T

T

L

L

L

L

L

T

T

T

0.01 min

0.01 min

0.02 min

0.02 min

Ti: 0.025

Ti: 0.025

Ti: 0.025

0.20

0.20

0.35

0.35

0.35

t≤16: 235t≥16: 225

t≤16: 235t≥16: 225

t≤16: 235t≥16: 225

0.012

0.012

0.012

0.012

0.012

0.012

0.012

165

1.5≤t≤2: 170-3402≤t≤8: 170-320

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

max

Ai

Standard Specification Chemical Composition (%)

235

t≤6: 2256≤t≤8: 2258≤t≤14: 215

L

1.6≤t≤2: 32 2≤t≤2.5: 33 2.5≤t≤3.15: 353.15≤t≤4: 364≤t≤6.3: 37

270-440 t≤3: 24t≤3:29

“t≤3: 26t≤3:31”

1.2≤t≤1.6: 27 1.6≤t≤3.2: 29 t≤3.2: 31

“t≤3: 29t≥3: 34"

1.2≤t≤1.6: 301.6≤t≤2: 322≤t≤2.5: 332.5≤t≤3.2: 353.2≤t≤4.0: 37t≥4.0: 39

290-400

440 max

270-420

270

400 max

270-380

420 max

270

270-400

270

380 max

330-440

330-430

t≤3: 360-510t≥3: 360-510

t≤3: 360-510t≥3: 360-510

t≤3: 360-510t≥3: 360-510

1.2≤t≤1.6: 31 -1.6≤t≤2: 332≤t≤2.5: 352.5≤t≤3.2: 373.2≤t≤4.0: 39t≥4.0: 41

t≤5: 26

t≥1.5≤2.17

t≥1.5≤2.17

t≤3: 32 t≥3: 37

t≤3: 20

t≤6.3: 25 on GL: 200mm

t≥1.5 ≤2: 17t≥2 ≤2.5: 18t≥2.5 ≤3: 19

t≥3: 24t≥2 ≤2.5: 18t≥2.5 ≤3: 19

t≥3: 24t≥2 ≤2.5: 18t≥2.5 ≤3: 19

t≤3: 19

t≤3: 23

t≤3: 22

1.5≤t≤2: 232≤t≤3: 24

t≤3: 25

1.5≤t≤2: 252≤t≤3: 26

t≤3: 28

1.5≤t≤2: 282≤t≤3: 29

t≤3: 31

1.5≤t≤2: 312≤t≤3: 32

t≥3: 28 2t

t≤12: closet≥12: 1t

t≥3.2: Closet≥3.2: 0.5t

Close

Close

Close

Close

Close

27

27

27

20

t≥3: 28

t≥3: 26

t≥3: 24

t≥3: 30

3≤t≤8: 28

t≥3: 30

3≤t≤8: 30

t≥3: 33

t≥3: 36

3≤t≤8: 33

3≤t≤8: 36

-20

1t

1t

-

t≤12: tt≥12: 2t

t≤12: tt≥12: 2t

0.5t

2t

1t

0

t≤2: 0.5tt≥2: 1t

UTS (Mpa)

min

360-470

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

370

1t

1t

42 43

Drawing & press forming

1.6≤t≤2: 222≤t≤2.5: 232.5≤t≤3.25: 243.25≤t≤6: 25

t≤5: 21

1.6≤t≤2: 31 2≤t≤2.5: 32 2.5≤t≤3.15: 343.15≤t≤4: 354≤t≤6.3: 36

1.6≤t≤2: 29 2≤t≤2.5: 30 2.5≤t≤3.15:323.15≤t≤4: 334≤t≤6.3: 34

410

410-520

400-510

400

400-550

t≤3: 430-580t≥3: 410-560t≥2.5 ≤3: 17

430

440

440

t≤3: 430-580t≥3: 410-560

t≤3: 430-580t≥3: 410-560

450

450

480

480

540

540

21

22

22

t≤2.5: 18t≤2.5: 20

t≥6: 18

1.6≤t≤2: 212≤t≤2.5: 222.5≤t≤3.25: 233.25≤t≤6: 24

t≤2.5: 20t≤2.5: 22

t≥6: 20

t≤3: 17

t≤3: 25

t≥6.3: 24onGL: 200mm

t≥6.3: 22onGL: 200mm

t≥1.5 ≤2: 15t≥2 ≤2.5: 16

t≥1.5 ≤2: 15t≥2 ≤2.5: 16t≥2.5 ≤3: 17

t≥1.5 ≤2: 15t≥2 ≤2.5: 16t≥2.5 ≤3: 17

2t

t≤12: tt≥12: 2t

t≤2: 1tt≥2: 1.5t

27

27

27

20

22

23

t≥3:24

t≥3:21

t≥3:21

t≥3:21

1.6≤t≤3.25: 1t

3.25≤t≤6: 1.5t

20 2t

2t1.6≤t≤3.25: 0.5t3.25≤t≤6: 1t

2t

2t

2t

2t

2t

2t

2t

2t 20 27

27

27

0

-20

2t

UTS (Mpa)

min

490490

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

1.5t

1t

SAE J403 E J403

IS 2062

IS 5986

JIS G3101

JIS G3113

EN 10025

EN 10025

SAE J403

ASTM A36

EN 10025

IS 2062

IS 2062

ASTM A1018

JIS G3113

SAE J403

SAE J403

ASTM A1011

ASTM A1018

ASTM A1011

IS 2062JIS G3134

IS 2062

JIS G3134

E250A

Grade 255(Fe410)

1018

S275J2

S275J0

S275JR

1021

HSLASGrade 55

Class1

HSLASGrade 55

Class1

HSLASGrade 50

Class1

HSLASGrade 50

Class1

1020

SAPH440

SPFH540

E410A

SS400

SAPH400

A36

E350ASPFH490

0.21

0.18

E275A

E300A

0.18-0.23

0.18-0.23

0.23or0.21

0.25or0.22

0.20

0.25

0.20

0.13-0.18

0.23

0.20

0.15-0.20

0.23

0.25

0.18

0.20

0.23

t≥20:0.8-1.20

0.30-0.60

0.60-0.90

0.30-0.60

1.50

1.30

1.50

1.50

1.50

1.50

1.50

0.60-0.90

1.50

1.55

1.35or

1.50

1.50

1.60

0.050 0.050

0.040

0.035

0.030

0.025

0.050

0.050

0.045

0.0450.045

0.045

0.040

0.030

0.040

0.050 0.030

0.040

0.030

0.025

0.040 0.40

0.40

0.45

0.45

0.45

0.030

0.045

0.045

0.040

0.035

0.045 0.045 0.40

0.050

0.0300.050

0.0401.35or

o.500.040

0.040 0.040

0.040

0.040

0.045 0.045

0.040

0.040

0.040

255

t≤6: 305 6≤t≤8: 2958≤t≤14: 275

340

340

0.25

0.42

0.40

0.40

0.40

0.43

0.44

0.42

0.25

0.25

0.20

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

0.012

0.012

0.012

L

L

L

T

T

T

T 250

T

T

L

T

L

T

TT

L

T

T

0.25 0.47

0.25 0.5

380

380

355

t≤20: 410 t≥20: 390

0.012

-

0.012

0.012

0.012

0.012

t≤20: 250 t≥20: 240

t≤16: 245t≥16: 235

t≤6: 2556≤t≤8: 2358≤t≤14: 235

t≤16: 275 t≥16: 265

t≤16: 275 t≥16: 265

t≤16: 275 t≥16: 265

t≤20: 275 t≥16: 265

t≤20: 300 t≥20: 290

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

max

Ai

Standard Specification Chemical Composition (%)

t≤20: 350 t≥20: 330325

L

44 45

Drawing & press forming

1.6≤t≤2: 192≤t≤2.5: 20

2.5≤t≤3.25: 213.25≤t≤6: 22

t≤2.5: 23t≥2.5: 25

520 t≤2.5: 16t≥2.5: 18

520 t≥6: 16

t≤2.5: 14t≥2.5: 16

t≥6: 14

t≥3: 31

t≥3: 29

t≤2.5: 23t≥2.5: 25

570

590

380

550

550

390-510

410

410

400-500

320-400

370-460

380

420-530

410

410

420-530

430-550

450-570

t≥6: 22

t≥6: 22

t≥3: 27

t≤2.5: 20t≥2.5: 22t≥2.5: 25

t≥3: 24

t≥3: 26

t≥3: 19

t≥3: 18

t≥3: 23

t≥3: 24

t≥6: 20t≥2.5: 25

t≥3: 25

t≤3: 19

t≤2.5: 20t≤2.5: 22

t≤3: 20

-

-

2.5t

2.5t

2.5t20

t≥3: 30

t≥3: 28

0.5t

1.5t

1.5t

t≤12: 2tt≥12: 3t

t≤12: 2tt≥12: 3t

Close

UTS (Mpa)

min

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

1.5t

3t

3t

1.5t

1.5t

1.5t

1.5t

ASTM A1011HSLAS

Grade 60Class1

HSLASGrade 60

Class1

HSLASGrade 65

Class1HSLAS

Grade 65Class1

HSLASGrade 45

Class2

HSLASGrade 45

Class1

HSLASGrade 45

Class1

HSLASGrade 45

Class2

ASTM A1018

IS 2062

JIS G3134

ASTM A1011

ASTM A1018

IS 1079

IS 1079

HR5_MA_YST255

HR5_MA_YST305

ASTM A1018

EN 10149

ASTM A1011

ASTM A1011

ASTM A1018

IS 5986 Grade 355

IS 1079

IS 5986

ASTM A1011

ASTM A1018

IS 1079

EN 10149

HR5_MA_YST340

Grade 325

HSLASGrade 50

Class2

HSLASGrade 50

Class2

E450A

SPFH590

HR5_MA_YST380

S355MC(E38)

0.26

0.16

S315MC(E34)

0.22

0.16

0.15

0.20

0.12

0.16

0.26

0.26

0.22

0.26

0.16

0.15

0.15

0.12

0.22or

0.20

0.20

0.15

1.50

1.50

1.60

1.30

1.50

1.50

1.65

1.30

1.35or

1.45

1.50

1.50

1.60

1.60

1.35

1.35

1.50

1.50

1.60

0.040

0.040 0.040

0.040 0.040

0.040

0.020 0.020

0.020 0.020

0.020

0.040

0.040 0.040

0.040

0.020 0.020

0.020 0.025 0.50

0.035 0.035

0.040 0.040

0.040

0.040

0.50 0.015 min0.025

0.040

0.040 0.040

0.45

0.020 0.020 0.02 min

0.040 0.040

0.040

0.045 0.045

0.040

0.040

410

340

325

0.25

0.20

0.20

0.52

0.42

0.20

0.20

0.20

0.20

0.22

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

0.012

0.012

0.012

0.02 min

0.02 min

L

L

L

T

L

T

T

310

310

310

L

L

L

L

T

T

L

T

T

L

L

T

0.45

340

355

355(380)

0.012

0.012

0.012

0.012

410

t≤20: 450t≥20: 430

420

450

310

315(340)

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

max

Ai

Standard Specification Chemical Composition (%)

L

46 47

Drawing & press forming

450 t≤2.5: 18t≥2.5: 20t≥2.5: 25

450 t≥6: 18

t≥3: 15

t≥3: 19

t≥3: 20

_

t≤2.5: 16t≥2.5: 18

t≤3: 16

t≤3: 14

t≤3: 12

t≤3: 12

t≤3: 11

t≤2.5: 16

t≥3: 21

t≤2.5: 14t≥2.5: 16

480-590

480-620

520

480

480

550-680

540-650

550-700

600-760

650-820

500-620

520-670

520

700-880

750-950

590

t≥6: 14

t≥3: 18

13

_

t≤3: 10

t≤3: 10

t≤3: 15

2t

t≤12: 2tt≥12: 3t

2t

t≥3: 17

t≥3: 17

t≥3: 12

t≥3: 14

t≥3: 14

t≥3: 13

t≥3: 12

t≥3: 12

t≥3: 15

2t

2t

1.5t

2.5t

UTS (Mpa)

min

Mechanical properties (’t’ = thickness in mm & ‘GL’ = Gauge Length)

%El (min)

GL: 5.65 √ (A)

%El (min)

GL: 50mm%El (min)

GL: 80mm

Bend

(180 deg)

Impact

Temp ºC

Impact

(J) min

0.5t

2t

2t

2.5t

1t

t≤12: 2tt≥12: 3t

1t

ASTM A1011HSLAS

Grade 55Class2

HSLASGrade 55

Class2

HSLASGrade 60

Class2

HSLASGrade 60

Class2

HSLASGrade 65

Class2

HSLASGrade 65

Class2

Grade 490

S500MC

S550MC

S600MC

S650MC

S700MC

ASTM A1018

IS 5986

EN 10149

ASTM A1011

ASTM A1018

IS 1079

EN 10149

HR5_MA_YST450

S460MC(BSK46/E46)

ASTM A1018

IS 1079

ASTM A1011

IS 5986

EN 10149

EN 10149

EN 10149

EN 10149

EN 10149

IS 1079 HR5_DP590

Grade 420

S420MC(E42)

0.16

HR5_MA_YST500

0.12

0.12

0.12

0.16

0.15

0.15

0.20

0.12

0.15

0.15

0.12

0.15

0.15

0.16

0.20

0.12

0.12

1.50

1.50

1.70

1.80

1.90

2.00

2.00

2.10

1.35

1.50

1.50

1.50

1.60

1.60

1.50

1.60

1.60

1.50

0.040 0.040

0.040 0.040

0.040

0.020 0.020

0.015 0.025

0.020

0.030

0.015 0.025

0.025

0.020

0.040 0.040

0.040

0.040

0.50

0.50

0.50

0.60

0.60

0.015 min

0.015 min

0.015 min

0.015 min

0.015 min

0.015 min

0.015 min

0.020

0.035

0.040

0.040

0.040

0.50

0.50

0.015

0.015

0.025

0.015 0.035

0.025

0.035 0.035

0.0250.015

0.015

0.050

380

t≤8: 700t≥8: 680

t≤8: 650t≥8: 630

0.20

0.22

0.20

0.22

0.45

0.42

NB+V+Ti:0.22

Mo: 0.50

NB+V+Ti:0.25

Mo: 0.50

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

Nb/V/Ti:0.005 min

0.22

0.22

0.20 0.45

0.20

MA: 0.15Cr+Mo: 1.0

NB+V+Ti:0.26

Mo: 0.50

0.012

0.012

0.02 min

0.02 min

L

L

T

L

550

550

460(460)

490

500

600

550

T

T

L

L

T

L

L

L

L

L

L

L

T

0.012

0.012

0.012

380

420

420(420)

410

410

Equivalent

Specification GradeC

max

Mn

max

S

max

P

max

Si

max

N

max

CE

max

Tensile

Test

Direction

YS (Mpa)

min

Micro alloys

maxAi

Standard Specification Chemical Composition (%)

L

4948

Dolvi WorksProduct Specification

50 51

Cold Rolling and Galvanising

IS 11513 Gr EDD

IS 11513 Gr EDD

IS 1079 Gr EDD

IS 11513 Gr EDD

IS 11513 Gr EDD

IS 11513 EDD

IS 11513 EDD

IS 11513 EDD

IS11513 Gr EDD

IS 6240 Gr - 1

IS 2062 (Fe 410WA& B)

EN10111Dd11

SAE1008

SAE1010

EN10111DD11,

EN10111Dd13

SAE1006R

SAE 1541

SAE 1006

SAE 1006

SAE 1006

SAE 1006

SAE 1006

SAE 1006

SAE 1030

ASTM 621,622 A621,

B622

SAE - 1020

(ThyssanKrupp

Electrical)

DIN1614Pt.1 St24

DIN1614Pt.1 St24

DIN1614Pt.1 St24

DIN1614Pt.1 St24

DIN1614Pt.1 St24

DIN1614Pt.1 St24

900 - 12701271 - 1560

900 - 12501251 - 13501351 - 1560900 - 12501251 - 13501351 - 1560

900 - 12501251 - 13501351 - 1560

900 - 12501251 - 13501351 - 1560

900 - 12501251 - 13501351 - 1560

900 - 12701271 - 13501351 - 1560

900 - 13501250 - 12511351 - 1560

900 - 13501251 - 12501351 - 1560

900 - 12501251 - 14501451 - 1560

900 - 12501251 - 14501451 - 1560

900 - 11401141 - 12501251 - 13501351 - 1550

900 - 11401141 - 12501251 - 13501351 - 1560

900 - 1450

900 - 1250

900 - 12501251 - 13501351 - 1560

900 - 1560

900 - 1350

900 - 156016 MnCr5,20MnCr5

1251 - 1350900 - 12501351 - 14501451 - 1560

1451 - 1560900 - 12501251 -13501351 - 1450

900 - 1450 0.28 - 0.32

0.02 0.02

0.02 0.02

0.025 0.025

1.51 - 12.01.80 - 12.0

1.50 - 12.01.80 - 12.02.0 - 12.01.5 - 5.01.8 - 5.02.0 - 5.0

1.5 - 12.01.6 - 12.02.0 - 12.0

1.5 - 12.01.8 - 12.02.0 - 12.0

1.5 - 12.01.8 - 12.02.0 - 12.0

1.5 - 12.01.8 - 12.02.0 - 12.0

1.5 - 12.01.8 - 12.02.0 - 12.0

1.5 - 12.01.8 - 12.02.0 - 12.0

1.5 - 7.01.8 - 7.02.0 - 7.0

1.6 - 12.01.8 - 12.02.0 - 12.0

1.5 - 12.01.45 - 12.01.9 - 12.0

1.7 - 6.51.8 - 6.52.0 - 6.52.5 - 6.5

1.7 - 12.01.8 - 12.02.0 - 12.02.5 - 12.0

3.0 - 6.0

3.0 - 5.0

3.7 - 10.0

2.5 - 6.0

2.2 - 12.03.0 - 12.03.2 - 12.03.5 - 12.0

2.2 - 12.03.0 - 12.03.2 - 12.03.5 - 12.0

3.0 - 6.0

4.0 - 8.0

2.2 - 8.02.5 - 8.03.0 - 8.03.2 - 8.0

900 - 12501251 - 13501351 - 14501451 - 1560

0.03

0.05

0.3

0.1 - 0.25

0

0.03

0.05

0

0.1

0.03

0.03

0.05 0.1 - 0.15

0.1 - 0.15

0.3

0.15

0.4

0.4

0.4

0.4

0.4

0.18- 0.4

0.3 - 0.6

0.55 - 0.7

0.4 - 0.5

0.6

0.25 - 0.4

0.3 - 0.6

1.35 - 1.5

0.9

1.1 - 1.4

0.4 - 0.6

0.05

0.07

0.6 - 0.9

0.6 - 0.9

0.6 - 0.9

0.045

0.08

0.08

0.03 0.03

0.01 0.01

0.2

0

0.05 - 0.2

0.05 - 0.15

0.08

0.05

0.05

0.05

0.06

0.012

0.06 - 0.08

0.05 - 0.08

0.065 -0.13

0.05 - 0.08

0.36 - 0.42

0.24 - 0.29

0.22 - 0.28

0.18 - 0.23

0.17 - 0.22

0.2

0.03

0

0

0

0

0

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width

(mm)

Mn P SiSC

Equivalent Grade Dimensional ScopeChemical

(% Max unless

0.25

0.15 - 0.25

ASTM 515Gr70 / SAE

1026

ASTM 515Gr70 / SAE

1026

0.01 0.02

0.03 0.03

0.03 0.03

0.03 0.03

0.03 0.03

0.03 0.03

0.02 0.025

0.015 0.03 - 0.15

0.015 0.02

0.025 0.025

0.045 0.045

0.02 0.02

0.01

0.02

0.02

0.01

0.035 0.035

0.02 0.025

0.05 0.03

0.035 0.035

50 0.03 - 0.1

0.025 -0.04

0.025 -0.04

0.02 -0.04

0.015 - 0.07

0.09 - 0.16

0.02 - 0.06

0.02

0.02

0.02 - 0.06

0.01 - 0.04

0.02 - 0.06

0 - 0.05

0 - 0.06

0 - 0.06

60

60

80

70

70

120

120

120

120

120

50

70

65

65 0.04 0.04 0.1

0.1

0.15

0.04 0.04

0.04 0.04

0.04 0.05

0.05

0.1

0.1

0.1

0.04

0.04 0.04

0.04 0.04

0.01 0.01 0.1 O.02

O.02

O.02

O.005 O.005 O.005

0.01 0.08

0.01 1.0 - 1.3

80

70

100

70

75

20

0

-20

260

300 410

485 21 on G-50 mm

25 on GL-5.65A

25 on GL-5.65A

1.5t

0.01

270 - 350 330 - 400

230 - 330 250 - 35025 on GL -

50mm

25%

240 350 - 4500.02

0 - 0.02

Ai (mm)

Compositionotherwise specified)

CrN ppm Ni Cu Mo Nb V Ti YSMPa UTSmPA %eLong bt180

0.02

0.02

0.02

0.02

0.02

0.015 - 0.055

1t

1t

1t

5352

Cold Rolling and Galvanising

IS 1079 HRSYST255

IS 10748 Gr1

JISG3132 &

JISF3131SPHT1

SAE 1035

SAE 5046H

SAE 1541

ML 45

SCM 435

MC 40

ITW C 303.0 - 10.03.5 - 10.0

2.5 - 101271 - 13501351 - 1560

2.5 - 12.03.0 - 12.03.5 - 12.0

900 - 12501251 - 13501351 - 1560

900 - 12501251 - 13501351 - 1555

900 - 11401141 - 13501351 - 1450

2.8 - 8.03.0 - 8.04.0 - 8.0

3.5 - 5.0

3.0 - 8.0 900 - 1270

900 - 1140

2.2 - 8.02.8 - 8.03.0 - 8.0

2.3 - 8.02.5 - 8.04.0 - 8.05.0 - 8.05.0 - 8.0

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

900 - 1250

2.8 - 8.0 900 - 1450

1.2 - 1.5

1.6 - 12.02.0 - 12.02.2 - 12.03.0 - 12.0

900 - 12701271 - 13501351 - 14501451 - 1560

0.035 0.03

0.02

0.1 - 0.25

0

0

900 - 1270 0.28 - 0.33 1.2 - 1.3

0.6 - 0.9

0.6 - 0.9

1.2 - 1.5

1.65

0.6 - 0.9

0.65 - 0.75

1.6

0.65 - 1.1

0.3 - 0.5

0.31 - 0.38

0.37 - 0.45

0.4 - 0.5

0.23

0.38 - 0.44

0.48 - 0.52

0.43 - 0.5

0.1

0.16

0.02

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width

(mm)

Mn P SiSC

Equivalent Grade Dimensional ScopeChemical

(% Max unless

0.01 0.02 0.15

0.060.045 0.045

0.025 0.025 0.2 - 0.25

0.15 - 0.35

0.001 - 0.03

0.02 0.02

0.001-

0.0250.001 - 0.03

0.2 - 0.25

0 - 0.02

0.01 - 0.04

0.02 - 0.05

0.02

120

120

70

120 0.02 - 0.05

70

70

0.005 -0.015 70

0.1

0.1

0.8

0.1

0.1

0.1

0.1 0.1 0.1 O.02

270 500 18 on G-5.65A

17 on G-50 mm

341 - 419 2t

2t

1t

450 550

230 320

320

30 on GL-

5.65A

Ai (mm)

Compositionotherwise specified)

CrN ppm Ni Cu Mo Nb V Ti YSMPa UTSmPA %eLong bt180

0.01

54 55

Drawing and press forming

IIS 11513 Gr EDD

IS 2062-2011E300

IS 2062-2011E300

IS 2062-2011E250

IS 1079 D

IS 1977 Fe 360JISG3113

SAPH370

EN10149-

2 St355MC

KLL 009

DIN17100

IS1079 HRSYST 255

JISG3134SAFH590

JISG3134SAFH540

JISG3113SAPH400

JISG3113SAPH400

JISG3113SAPH400

JISG3113SAPH440

JISG3113SAPH440

SAE 1006

SAE 1008

SAE 1008

SAE 1008

IS 2062 A, B, C.

IS 2062 A, B, C.

JIG3101& JISG3106

Ss400& SM

EN100025S275JR,S275JO

ASTMA283 &ASTM

A570 D& 45

ASTMA283 &ASTM

A570 D& 45

EN100025S275JR,S275JO

DINEN

10149-QSTE380

DINEN

10149-QSTE380

JIG3101& JISG3106

Ss400& SM

DP-600 3.0 - 5.0

DIN1614Pt.1 St24

1.5 - 12.01.6 - 12.02.0 - 12.02.5 - 12.0

900 - 12501251 - 13501351 - 14501451 - 1560

900 -12501251 - 13501351 - 1450451 - 1560

900 - 1270

900 - 1560

900 - 1250

1.75 - 3.992.4 - 3.992.6 - 3.993.0 - 3.99

4.0 - 6.0

2.3 - 4.2

1.5 - 3.491.75 - 3.492.0 - 3.49

900 - 12701271 - 13501351 - 1560

3.5 - 6.0 900 - 1560

900 - 1270

900 - 1270

900 - 1250

1.4 - 3.0

900 - 1260

2.6 - 4.5

2.6 - 4.5

3.0 - 13.0

2.5 - 12.53.0 - 12.5

900 - 1550

900 - 12501251 - 1550

2.0 - 10.02.5 - 10.03.2 - 10.0

1.2 - 1.5

900 - 11401251 - 14501451 - 1560

900 - 12501251 - 13501351 - 14501451 - 1555

900 - 12501251 - 13501351 - 14501451 - 1560

2.5 - 4.03.0 - 4.03.2 - 4.03.5 - 4.0

DIN17100

St 44.2,St 44.3

DIN17100St 44.2,St 44.3

6.0 - 15.0 900 - 1550

2.0 - 8.03.0 - 8.03.5 - 8.0

900 - 12501251 - 14501451 - 1560

8.0 - 20.0 900 - 1560 0.22

2.5 - 5.02.6 - 5.02.8 - 5.03.0 - 5.0

0.01 0.015

0.03 0.03

1.35 0.04

0.06

0.04

0.4

0.4

0.1

0.5

0.03

0.08

0.065

0.4

0.15 - 2.2

0.21

1.35

1.4

0.5

0.5

0.5

1.7

2

1.6

0.6

1.5

1

0.6

1.35

1.35

1.6

1.6

0.21

0.17

1

0.04 0.04 0.04

0.04 0.04 0.04

0.1

0.1

0.1

0.1

0.1

0.16

0.12

0.12

0.1

0.21

0.21

0.22

0.2

0

0

0

0.4

0

0

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width

(mm)

Mn P SiSC

Equivalent Grade Dimensional ScopeChemical

(% Max unless

0.25

0.04 0.04

0.05 0.05

0.03

0.035

0.035

0.03

0.03

0.025 0.025

0.025

0.035

0.025

0.02

0.02

0.02

0.02

0.025

0.025

0.040.04

0.04 0.40

0.05

0.05

0.04 0.04

0.035 0.035

0.02

0.02 - 0.04

0.4

0.06

0.02 - 0.07

0 - 0.06

0.015

0.02 - 0.06

0.02 - 0.05

0.02 - 0.05

120

90

100

100

120

60

0.02-0.05

60

120

0.7

0.09 0.2

0.01

0.01

0.1

0.1

O.05

O.15

O.05 355 540

590

320 - 400

420

240

355

235

380 - 460

380 - 460

250

250

100

120

120

600 - 700 21 on GL-50mm

30 on GL-50mm

30 on GL-50mm

36 on GL-50mm 1.5t

32 on GL-50mm

32 on GL-50mm

32 on GL-0t

340 - 400

305 - 400

305 - 400

270 - 305

320 410

410

41050 mm

320

320

410

410

2.0t

2.0t

2.0t

350 - 410

430 - 550

370

240 - 400

460 - 550

460 - 550

24 on GL-5.65A

22 on GL-5.65A

28 0n 80mm GL

35 on GL-5.65A

25 on GL-5.65A

21 on50 mm GL

21 on GL-50mm

23 on GL-5.65A

23 on GL-5.65A

23 on GL-5.65A 0.5t

0t 27J at 00C

Close

1.5t

1t

Ai (mm)

0.02

Compositionotherwise specified)

Mechanical properties

CrN ppm Nb V Ti YSMPa UTSmPA %ELong bt180 Imapact

Test

0.02-0.05 440 - 520

400 - 490

56 57

Drawing and press forming

IS 2062-2011E250

IS 2062-2011E450

IS 2062 E350

IS 2062 E350

JISG3106SM490

ABJISG3106SM490

AB

EN Fe10025510B

DIN EN10149QSTE420

EN Fe10025fe510B

DINEN 10149|S460MC

KLL - 004

DIN17100St 52.3

DIN17100

St 52.3

TelcoSS4012A

TelcoSS4012A

TataMotor-E-38

BSK 46,Tr46,E-46

TataMotorsE-46

BSK46/Tata

MotorsE-46

3.0 - 8.03.5 - 8.04.0 - 8.04.5 - 8.0

4.0 - 14.0 900 - 1560

900 - 11401141 - 12501251 - 14501451 - 1560

900 - 1260

900 - 1560

900 - 13501351 - 1560

6.0 - 14.0

2.7 - 5.0

2.5 - 5.993.0 - 5.99

6.0 - 16.06.0 - 15.0

900 - 13501351 - 1560

1.6 - 3.01.8 - 3.0

900 - 12601261 - 1560

900 - 1560

900 - 1560

900 - 1560

900 - 1560

900 - 11401141 - 12501251 - 1560

3.01 - 12.0

3.0 - 8.0

2.0 - 10.0

2.5 - 8.02.4 - 8.03.0 - 8.0

8.01 - 12.0

0.025 0.025

0.025

0.025

0.03 0.03 0.03

0.015

0.04

0.1

0.4

0.4

0.1

0.2

0.12

0.12

1.2

1.0

1.6

1.2

1.5

1.5

0.7

0.7

1

1

1

1

0.17

0.2

0.2

0.1

0.1

0.1

0.12

0.12

0.120.12

0.55

0.55

0.05

0.5

0.2

0.2

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width

(mm)

Mn P SiSC

Equivalent Grade Dimensional ScopeChemical

(% Max unless

0.02

0.04 0.04

0.03

0.04 0.04

0.03

0.03

0.03 0.03

0.025

0.03

0.025

0.025 0.025

0.025 0.025

0.02 - 0.06

0.02

0.02

0.02

0.02

0.02

0.02

0.02

90

90

120

0.06 0.095 0.045

0.045

0.045

0.045

0.045

0.045

0.15

0.095

0.095

0.095

0.095

0.095

0.095

0.09 0.02

0.06

0.06

0.06

0.055

0.055 370 - 460 440 - 560

500 - 610

500 - 610

500 - 610460

460 - 530

460 - 530

520 - 620

520 - 670

23 on GL-50mm

21 on GL- 0.5t5.65A

14 on G-50mm

28 on GL-5.65A

22 on GL-5.65A

22 on GL-5.65A

27 on GL-5.65A

27 on GL-

2t

2t

0.5t

0.5t

0.5t

0.5t

0.5t

0.5t

1t

1t

2t

420 - 490

255 410

460

325 - 460

355

355

390 - 490

390 - 4905.65A

355 - 410

355 - 410

25 on GL-5.65A

21 on GL-5.65A

21 on GL-5.65A

21 on GL-5.65A

Ai (mm)

Compositionotherwise specified)

Mechanical properties

CrN ppm Nb V Ti YSMPa UTSmPA %ELong bt180 Imapact

Test

0.02-0.07 450 - 530

490 - 630

490 - 630

58 59

Welded tubes and pipes

IS 10748 Gr 1,IS 1079 DD

IS 2062 Fe410CuWA,

EN10149-

2 St355MC

JISG3106SM490A,B

En10025Fe510B

En10025Fe510B

En10025S355

En10025Fe510B

JISG3106SM490A,B

JISG3106SM490A,B

JISG3106SM490A,B

JISG3132SPHT1

JISG3132SPHT1

JISG3132SPHT1

JISG3132SPHT1

IS 2062 E350

IS 2062 E350

IS 2062-2011E350

IS 2062-2011E350

IS 10748 Gr1

IS 10748 Gr1

IS 10748 Gr2

IS 10748 Gr2

IS 10748 Gr-3,IS 2062 A,B

IS 10748 Gr-3,IS 2062 A,B

JIS G 3103SS400 ASTM - A36M

ASTM - A36M ST42.3

JIS G3113SAPH 400

JIS G3113SAPH 400

SAE 1008

SAE 1008

ASTM A1011-07,HSLA Gr50CL-1/2; ASTM A 1011-07,SS

Grade 50; ASTM A 572 Gr 50

ASTM A 572 - 07 Gr50 Type 1

ASTM A 572 - 07 Gr50 Type 1

IS 2062 E-250

IS 2062 E-250

IS 2062 Fe 410WA, WB

IS 2062 Fe 410WA, WB

1.5 - 3.491.75 - 3.492.0 - 3.492.5 - 3.49

1.5 - 4.0 1.8- 4.0 2.5 -4.0

3.5 - 6.0

4.0 - 20.0

1.6 - 3.992.5 - 3.992.8 - 3.99

4.0 - 8.0

8.01 - 16.0

6.0 - 16.06.0 - 15.0

2.5 - 5.993.0 - 5.99

5.0 - 15.0

1.5 - 12.01.8 - 12.02.2 - 12.02.3 - 12.0

DIN17100St 52.3

DIN17100St 52.3

DIN17100St 52.3

DIN17100St 52.3

2.9 - 6.0 2.8- 6.0 3.0- 6.0

1.55 - 12.02.0 - 12.02.2 - 12.03.0 - 12.01.6 - 3.992.5 - 3.99

1.5 - 12.52.2 - 12.52.5 - 12.53.0 - 12.5

2.4 - 6.4 2.5- 5.0 3.0 -5.0

5.01 - 20.0

2.4 - 7.0 2.5- 7.0 3.0 -7.0

7.01 - 20.0

3.0 - 8.0 4.0- 8.0

8.01 - 16.08.01 - 12.0

900 - 13501351 - 1550

900 - 13501351 - 1550

900 - 1550

0.5 0.035

0.5 0.035

0.5 0.03

0.03

0.04

0.04

0.04

900 - 12701271 - 13501351 - 14501451 - 1560

900 - 1560

0.1

0.1

0.055

-0.1

0.23

0.25

0.23

0.23

0.2

0.2

0.2

1.7

0.1

0.1

0.1

0.1

0.16

0.16

0.23

0.23

0.22

0.22

900 - 1560

900 - 12501251 - 13501351 - 1520

900 - 1520

900 - 1520

900 - 12701271 - 13501351 - 1555

1.5

1.5

1.5

1.5 0.045 0.045

0.045 0.045

0.045 0.045

0.045 0.045

900 - 13501351 - 1560

900 - 13501351 - 1560

900 - 11401141 - 12501251 - 1560

900-1560

950 - 12701271 - 13501351 - 14501451 - 1550950 - 12701271 - 13501351 - 14501451 - 1550

900 - 13501351 - 15001501 - 1550

900 - 12501251 - 13501351 - 14501451 - 1555

950 - 12501251 - 1550

900 - 1550

900 - 13501351 - 15001501 - 1550

0.03 0

0

0

0

0.4

0.4

0.4

0.55

0.55

0.55

0

0

0

0

0

0.4

0.4

0.4

0.4

0.04

0.035

0.05

0.04

0.04

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width

(mm)Mn

P SiSC

Equivalent Grade Dimensional ScopeChemical

(% Max unless

1.5 0.05

1.35 0.04

0.05

1.35

1.35

0.04

0.05

1.5 0.04

1.5

1.6

0.3 - 0.5

0.5 0.05 0.05

0.05 0.05

0.001 - 0.001 - 0.001 -

0.6

0.04 0.04

0.04

1.2

1.2

0.04 0.04

0.6 0.05 0.05

0.05 0.05

0.02

0.02 min

0.02 -

120

120

90

120

120

120

120

120

120

120

90

90

120

70

0.2 0.2

0.2 - 0.35

0.6 0.008 0.008

0.005 -0.05

0.005 -0.05

0.15

235

320

320 410

410

270 - 400

410

450

450

450

490 - 630

490 - 630

490 - 630

0.025 345

345

345

355

355

355

250

250

250

250

170

230

210

210

240

240

340 - 670

290

320

330

330

410

410

410

410

410

410 23 on GL-5.65√A

23 on GL-5.65√A

23 on GL-5.65√A

23 on GL-5.65√A

25 on GL-5.65√A

24 on GL-5.65√A

30 on GL-5.65√A

30 on GL-5.65√A

30 on GL-5.65√A

19 on GL-5.65√A

20 on GL-5.65√A

22 on GL-5.65√A

22 on GL-5.65√A

23 on GL-5.65√A 3t

2.5t

1.5t

1.5t

1.5t

2t

2t

3t

33 on GL-5.65√A

32 on GL-5.65√A

32 on GL-5.65√A

21 on 50 mm GL

21 on GL-50mm

17 on GL-50mm

25 on GL-5.65√A

1t

1t

1t

1t

2t

2t

2t

2t

2t

2t

Ai (mm)

0.02

0.02

0.02

0.02

Compositionotherwise specified)

Mechanical properties

NiN ppm Cr CuMo Nb V Ti YSMPa UTSmPA

%ELong bt180

170

250

6160

Line pipes

Electrical stamping and forming

0.05 0.05

0.05 0.05

0.05

0.080.05 0.05

0.05

0.05 0.05

0.10.08

0.05

0.04

0.04 0.04 0.04

0.06

0.06

0.06

0.05

0.04 0.04

0.04

448 - 600

448 - 600

483 - 621

552- 690

360 -500

390 - 540

390 - 530

414 - 565

245 - 450 415 - 670

425- 600

414 - 758

414 - 758

414 - 758

414 - 758

425

435 - 600

434 - 758

450 - 550

455 - 758

460 - 585

495 - 650

520 - 680

517 - 758

531 - 758

531 - 758

565 - 758

621 - 827

425 - 600

245 - 360

245 - 360

241 - 448

241 - 448

290 - 496

290 - 496

300 - 400

260 - 400

317 - 524

300 - 410

359 -531

1t 27J at -20:C 0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9 8

8

8

8

8

7

7

8

8

8

8

8

8

8

8

8

8

0.87 90% on - 20:C

90% on - 20:C

90% on - 20:C

85% on - 20:C

90% on 0:C

0.87

0.85

0.85

0.87

0.88

0.88

27J at -20:C

27J at -20:C

27J at -20:C

27J at -20:C

27J at -20:C

50J at -20:C

55J at 0:C

85J at 0:C

35J at -20:C

40J at 0:C

70J at -10:C

40J at -10:C

68J at 0:C

100J at -20:C

90J at -20:C

68J at -5:C

90J at -20:C

90J at -20:C

1t

1t

1t

1t

1t

2t

2t

2t

2t

2t

2t

2t

1t

1t

1t

1t

1t

1t

30 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

26 on GL - 50 mm

30 on GL - 50 mm

30 on GL - 50 mm

27 on GL - 50 mm

25 on GL - 50 mm

26 on GL - 50 mm

28 on GL - 50 mm

24 on GL - 50 mm

24 on GL - 50 mm

24 on GL - 50 mm

27 on GL - 50 mm

21 on GL - 50 mm

28 on GL - 50 mm

Nb

Mechanical properties

TiV YS Mpa

(min)

UTS Mpa

(mm)%Elong (min) BT 1800 Impact Test DWTTYS/UTS

( max)ASTM(GrainSize)

API 5LB -with Cu(.2 - .35) 7.5 - 12.0

4.0 - 8.0

8.01 - 20.0

8.01 - 20.0

4.0 - 11.0

4.0 - 10.0

10.0 - 15.0

4.0 - 8.0

4.0 - 10.0

4.0 - 22.0

API 5L B

API 5L B

API 5L B

API 5L B

API 5L X42

API 5L X42

API 5L X42

API 5L B

API 5L X46

API 5L X46

API 5L X52

API 5L X52

API 5L X56

API 5L X60

API 5L X60

API 5L X65

API 5L X65

API 5L X70

API 5L X80

6.0 - 12.0

6.0 - 10.0

4.0 - 16.0

4.0 - 8.0

4.0 - 16.0

4.0 - 16.0

4.0 - 12.7

12.71 - 16.0

8.0 - 16.0

4.5 - 11.5 5.0- 10.0

900 - 1550 0.22 1.2

1.2

1.2

1.2

1.5

1.3

1.3

1.25

1.2

1.4

0.22

0.22

0.22

0.22

0.22

0.22

0.08

0.120

0.22

0.22

0.22

0.22

0.22

0.22

0.22

0.16

0.15

0.12

0.1

900 - 1550

900 - 1550

900 - 1550

900 - 1550

910 - 1550

910 - 1550

900 - 11401141 - 1560

950 - 1550

950 - 1550

950 - 1550

950 - 1550

950 - 1560

900 - 1550

900 - 1500

950 - 1500

950 - 1560

900 - 1550

950 - 1550

950 - 1550

0.015

0.015

0.015

0.015

0.015

0.015

0.015

0.025

0.025

0.025

0.025

0.025

0.025

0.025

0.02

0.02

0.02

0.02

0.02

0.01

0.010 0.018

0.025

0.025

0.025

0.025

0.025

0.025

0.0250.015

0.01

0.01

1.0 -1.35

1.4

1.5

1.1 - 1.4

1.1 - 1.35

1.4

1.45

1.65

1.65

1.85

0.015

0.015

0.01

0.015

0.015

0.015

0.015

0.015

0.35 0.01

0.015 - 0.03

0.015 - 0.03

0.015 - 0.03

0.4

0.4

0.4

0.4

0.4

0.4

0.4

0.4

0.4

0.4

0.4

0

0

0

0.35

0.35

0.35

0.25

0.15 -0.35

0.15 -0.25

90

90

85

90

70

100

100

120

100

100

100

0 - 0.05

0 - 0.06

0 - 0.07

0.06

0.06

0 - 0.15

0.2 -0.35

0.15 0.08

0.2

0.15 0.15

Thickness

(mm)

Width

(mm)Mn P Si Al

(min)

N ppm

(max)Ni Cr Cu MoSC

Equivalent Grade

Dimensional Scope Chemical(% Max unless

0.1

0.15

0.2

0.2

0.2 0.2

0.1

0.10.15

Raymond Ld0106/ Thyssan Krupp

Electrical

2.0 - 4.0 900 - 1250

0.1

0.015 0.2 - 0.4

0.6 - 1.1

0.50.12

900 - 10501051 - 1250

900 - 11401141 - 12501251 - 14501451 - 1560

2.0 - 4.02.1 - 4.0

1.8 - 5.02.0 - 5.02.2 - 5.02.5 - 5.0

DIN1614 Pt.1 St22, RSt 23

SAE 1008

As Per Standards

IS 11513 D, DD

BIS JIS EN

Equivalent Grade Dimensional Scope

SAE/ASTM Others C NmThickness

(mm)

witdh

(mm)

0.015 0.07 - 0.1 0.2 - 0.6 0.2 - 0.4 50

40

120

0.2 - 0.4

0.05

0.05 0.05 0.07 0.07

0.10.95 - 1.2

0

0.02 - 0.030.01

0.04 0.04

0.04 0.04

Chemical Composition

(% Max unless otherwise specified)

S P Si AL (Min) N ppm (max) Ni Cr Cu Ti

62 63

Medium Carbon Un-alloyed grades

IS 2062 E350 BR

IS 2062-2011 E250

IS 2062 E250(Fe 410WA &WB)

IS 2062-2006E 250A

IS 2062-2011 E350

IS 2062 -2011 E410

IS 2062 E 250 A, B

IS 2062 E 250 A, B

IS 2062 - 2006E 250A

SAE - 1020

ASTM 515 Gr70 / SAE 1026

ASTM 515 Gr70 / SAE 1026

SAE 1030

SAE 1035

SAE 1541

IS 2062(Fe 410WA & B)

ASTM A 572 Gr 50

ASTM A 572 Gr 50 Type I

ASTM A 572 Gr 42 (290);ASTM A 515 Gr 60 (415);

ASTM A 1011 SS &HSLA Gr 45

EN 10025S355JR

EN 10025-2-2004 S275JO

En1002 5S355JR

SAE 1018

SAE 1018

ASTM A 1011 SS &HSLA Gr 55/60 ;

ASTM A 572 Gr 55

EN 10025S275JR

4.0 - 20.05.0 - 20.0

2.0 - 10.02.5 - 10.02.8 - 10.03.2 - 10.04.0 - 10.0

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

2.2 - 8.02.4 - 8.03.0 - 8.03.5 - 8.0

4.0 - 12.5

4.0 - 20.04.0 - 16.0

2.0 - 8.02.5 - 8.03.0 - 8.03.2 - 8.02.0 - 8.02.5 - 8.03.0 - 8.03.2 - 8.0

6.0 - 16.0

4.0 - 8.0

2.0 - 16.02.2 - 12.02.5 - 12.03.0 - 12.0

TATA 55HF

2.2 - 8.02.5 - 8.03.0 - 8.03.2 - 8.0

2.2 - 12.03.0 - 12.03.2 - 12.03.5 - 12.0

2.2 - 12.03.0 - 12.03.2 - 12.03.5 - 12.0

ITW C 30

3.0 - 6.0 900 - 1450

16 MnCr5,20MnCr5

2.5 - 103.0 - 10.03.5 - 10.0

2.5 - 123.0 - 12.03.5 - 12.0

MC 402.8 - 8.03.0 - 8.03.0 - 8.0

2.2 - 10.03.0 - 10.03.5 - 10.04.0 - 10.0

3.0 - 8.0 900 - 1270

10.01-20.0 900 -1560

900 -15604.0 - 16.0

0.23

0.2

0.16 - 0.2

1.35

0.3-0.4

1.2 - 1.7

1.1 - 1.4

1.6

0.4 - 0.6

0.6 - 0.9

0.6 - 0.9

0.6 - 0.9

0.6 - 0.9

0.6 - 0.9

1.2 - 1.5

1.2 - 1.3

900 - 12501251 - 1560

900 - 1350

900 - 13501351 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12701271 - 13601361 - 14501451 - 1560

0.22

0.22

1.5

0.02

1.5

1.2

900 - 1560

900 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12701271 - 13501351 - 1560

900 - 12501251 -13501351 - 1560

900 - 12501251 - 13501351 - 1555

900 - 12501251 - 13501351 - 14501451 - 1560

1.5

1.5

1.5

0.75 - 0.9

0.6 - 0.9

BIS JIS EN SAE/ASTM Others Thickness(mm)

Width(mm)

MnC

Equivalent Grade Dimensional Scope

0.22

0.18 - 0.22

0.23

0.2

0.2

900 - 1250

0.22 - 0.28

0.18 - 0.23

0.17 - 0.22

0.24 - 0.29

0.37 - 0.45

0.38 - 0.44

0.28 - 0.32

0.28 - 0.33

0.31 - 0.38

0.045 0.045

0.04

0.03 0.03

0.02

0.04 0.04

0.05

0.04 0.04

0.035 0.035

0.05

0.01

0.02 0.02

0.035 0.03

0.03

0.03

0.025

0.01 0.02

0.045 0.045

0.045 0.045

0.04 0.04

0.2

0

0.05 - 0.2

0.05 - 0.15

0.2 - 0.25

0.1 - 0.25

0

0.15

0.15 - 0.25 0 - 0.02

0.02 - 0.06

0 - 0.05

0 - 0.06

0.1 - 0.06

0.005 - 0.015

0 - 0.02

0.01 - 0.04

120

120

120

70

70

70

50

0.55

0.035

0.45

0.4 0.01 - 0.04

0.01-0.07

0.4

0.4

0.1 0.02 - 0.06

75

70 0.1 0.11.0 - 1.3

0.1 0.1 0.1 0.2

0.1 0.10.08

90

90

75

120

120

120

0.2 0.15 0.2 0.06

0.02 - 0.035

70

0.03 - 0.1

355 490 - 630

410

410300

260 485

341 - 419

270 500

250

250

240

540

0.4

0.4

0.45

355

345

240

310 410

410

450

490- 630

275

22 on GL-5.65 A

21 on GL-50 mm

25 on5.65 A

23 on GL-5.65 A

23 on GL-5.65 A

2t

2t

2t

2t

2t

2t

2t

2t

2t

2t

410 - 560

410

410

410

22 on GL-5.65 A

22 on GL-5.65A

25 on GL-5.65A

18 on GL-5.65 A

23 on GL-5.65 A

23 on GL-5.65 A

25 on GL-5.65 A

21 on GL-50 mm

30J at 200C

S

0.01 0.01

Chemical Composition (% Max unless otherwise specified) Mechanical properties

SiP Al (min) N ppm

(Max)Ni Cr Cu Mo Bt180Nb

YS

(Mpa)

UTS (Mpa)Imapact

Test

0.045

0.045 0.045

0.045

0.035

0.0250.015

0.03

0.005

0.005

%ELong

6564

Medium Carbon Un-alloyed grades

IS 2062-2011 E350

IS 2062-2011 E350

IS 2062 E450

IS 2062 E450

ASTM A 572 Gr 65 Type 1

ASTM A 572 Gr 65 Type I

SAE 5046H

ASTM A572 Gr 50 Type 1

ASTM A572 Gr 50 Type I

ASTM A572 Gr 50

ASTM A572 Gr 50 Type I

EN 10025S355JR

EN 10025S355JR

EN 10025S355JR

IS 2062 E 350 BR

IS 2062 E 350 BR

EN 10025Fe510B

EN 10025Fe510B

ASTM A572 Gr 50 Type I

ASTM A572 Gr 50

ASTM A572 Gr 50

2.2 - 10.02.5 - 10.03.0 - 10.03.5 - 10.04.0 - 10.0

2.2 - 10.02.5 - 10.03.0 - 10.03.5 - 10.04.0 - 10.0

10.01 - 20 900 - 1560

900 - 1560

900 - 1560

900 - 1560

900 - 1560

10.01 - 20

10.01 - 15

4.0 - 12

12.01 - 20

12.01 - 16

4.0 - 10.05.0 - 10.0

3.8 - 15.04.0 - 15.0

DIN17100St52.3

DIN17100St52.3

10.01 - 20

3.5 - 5.0

2.2 - 8.02.8 - 8.03.0 - 8.0

2.3 - 8.02.5 - 8.04.0 - 8.05.0 - 8.06.0 - 8.0

2.8 - 8.0 900 - 1450

ML 45

SCM 435

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

0.23

0.23

0.23

1.35

1.35

1.35

1.35

1.65

1.65

1.65

0.6 - 0.9

0.65 - 0.75

0.65 - 1.1

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

900 - 12701271 - 1560

900 - 1560

900 - 1560

900 - 12501251 - 1560

900 - 1140

900 - 11401141 - 13501351 - 1450

BIS JIS EN SAE/ASTM Others Thickness

(mm)Width

(mm)Mn

C

Equivalent Grade Dimensional Scope

0.23

0.23

1.5

1.5

1.5

1.5

0.2

0.2

0.23

0.23

0.23

0.4 - 0.5

0.48 - 0.52

0.43 - 0.5

0.05

0.05

0.05

0.05

0.025 0.025 0.02 - 0.25 0.01

0.15 - 0.35

70

0.06

0.06

0.4

0.4

0.40.04

0.45

0.45

0.45

0.45

0.06

0.06

0.06 120

120

120

120

120

120

1200.01-0.06

0.01-0.06

0.1 0.1 0.1

120

120

0.005 - 0.05

0.005 - 0.05

0.005 - 0.05

0.005 - 0.05

355

355

450

450

450

550

550

550

0.02 - 0.05

0.02 - 0.05

0.02 - 0.05

345

345

345

345

345

375

375

450

450

450

490 - 615

490 - 615

490 - 630

490 - 630

450

450 21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

22 on GL-5.65 A

22 on GL-5.65 A

20 on GL-5.65 A

20 on GL-5.65 A

17 on GL-5.65 A

17 on GL-5.65 A

17 on GL-5.65 A

17 on GL-50 mm

1.5t

1.5t

1.5t

1.5t

1.5t

2t 27J at 270C

27J at 270C2t

2t

2t

2t

3t

3t

2t

S

Chemical Composition (% Max unless otherwise specified) Mechanical properties

SiP AL (min) N ppm

(Max)Ni Cr Cu Mo Bt180Nb

YS

(Mpa)

UTS (Mpa)Imapact

Test

1.35 0.05

0.04

0.04

0.04

0.04

0.045 0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

0.045

%ELong

66 67

Simple Pressure Vessels

Boiler Tubes And Pressure Vessels

IS 2002 Gr1,IS 2062 E-250

IS 1977 Fe 360 JISG3113SAPH370

JISG3106SM490A.B

JISG3106SM490A.B

En10025Fe510B

En10025Fe510B

ASTM A516Gr 55

ASTM A516Gr 55 DIN17100 St 37.2

2.4 - 7.02.5 - 7.03.0 - 7.0

900 - 13501351 - 15001501 - 1550

0.23

0.1

02

02

900 - 11401141 - 12501251 - 14501451 - 1560

900 - 13501351 - 1560

900 - 13501351 - 1560

2.0 - 10.02.2 - 10.02.5 - 10.03.2 - 10.0

2.5 - 5.993.0 - 5.99

6.0 - 16.06.0 - 15.0

DIN17100 St 52.3

DIN17100 St 52.3

ASTM A516Gr 65

ASTM A516Gr 65

IS 2002 Gr3,IS 2062 E350

IS 2002 Gr3,IS 2062 E350

BIS JIS EN SAE/

ASTM

Others Thickness

(mm)

Width (mm)

C

Equivalent Grade Dimensional ScopeChemical Composition

(% max unless or as specified)

1.5

1

1.5

1.5

0.045 0.045 0.04

0.04

0.04

0.040.04

0.04

0.04 0.03

0.55

0.55

250

235

355

35590

90

0.02 - 0.06

410

370

490 - 630

490 - 630

23 onGL-5.65vA

22 onGL-5.65vA

22 onGL-5.65vA

2t

2t

2t

Mn S P SiAL

(min)N PPM(max)

YS MPa(min)

UTS MPa %Elong(min)

BT 180°

Mechanical properties

IS 11513Gr EDD

"IS 6240Gr - 1"

IS 2062-2011 E250

JISG3116Sg255

JISG3116Sg295

EN10120P310NB1.0437

EN10120P355NB1.0557

EN10120P265NB

IS 2062-2011 E300

IS 2062-2011 E300

IS 2062-2011 E300

IS15914:2011

Hs345

SAE 1006

ASTM 621,622A621,B622

1.5 - 12.01.8 - 12.0

2.5 - 6.0

2.5 - 6.0

2.5 - 5.02.8 - 5.0

2.1 - 2.5

2.2 - 5.02.5 - 5.03.0 - 5.0

2.1 - 3.02.5 - 3.0

900 - 1560

900 - 12501251 - 1350

0.035

0.04

0.04

0.04

0.015

0.015

0.015

0.2

0.2

0.2

0.2

0.2

0.2

0.06

0.3 min

0.9

0.3

0.035 0.25

0.04

0.04 0.35

0.35

0.5

0.5

0.04

900 - 12501251 - 1350

900 - 1350

900-1320

900 - 11401141 - 12501251 - 1350

900 - 12501251 - 1350

0.02 0.032.0 - 12.0

0.025

0.025

BIS JIS EN SAE/ASTM Thickness

(mm)Width

(mm)Mn S P SiC

Equivalent Grade Dimensional Scope Chemical Composition(% max unless or as specified)

1.0

0.7 (min)

1.0

0.7 - 2.0

0.02 - 0.061351 - 1560 70

0.02

0.02

0.1 0.1 0.1 0.2

0.05

0.05 0.05 0.03

0.03

50

240

255

295

295

310

355

350 - 450

400

440

440

460 - 550

510 - 620

25 on GL-5.65 VA

28 on 50mm GL

26 on 50mm GL

26 on 50mm GL

21 on GL-5.65VA

20 on GL-50mm GL

2t

1t

1.5t

1.5t

AL

(min)

Mechanical properties

NiN ppm

(max)

Cr Cu Mo Bt180Nb V Ti YS

(Mpa)

UTS (Mpa) Imapact

Test

100

90

90

%ELong

(min)

68 69

HSLA Grades

0.5

0.02 -0.06

0.015 550

650

600-760

700-8005.65vA

600-700340-400

305-400

305-400

440-520

440-520

300-400

305-400 440-520

500

520-670

450

450

460-530

460-530

450

490-630

450-530

450-630

570

570

390-490

390-490

440-560

500-610

500-610

500-610

460

375

345

345

450

355

450

345

325-405

355-410

355-410

355

370-460

355

420

540

255 410

590

520-620

440-520

420-490

460

0.6 0.02 -0.04

0.02 -0.05

0.02 -0.06

0.02 -0.05

60

100

100

120

120

90

90

120

120

0 - 0.06

0 - 0.06

0.02

0.02 -0.05

0.02 -0.05

0.02 -0.07

0.02 -0.07

20J at00C

27J at00C

27J at400C

27J at400C

20J at00C

0.020

0.020

0.02

0.02

0.02

0.02

0.02

0.02

0.2 0.2 0.20.06 0.06 0.008

0.005-0.05

0.2 -0.35

0.2 -0.35

0.005-0.05

0.055

0.055

0.06

0.06

0.06 0.095 0.045

0.045

0.045

0.045

0.045

0.095

0.095

0.095

0.095

0.095

0.09

0.090.5

0.2

0.2

0.15

0.15

0.06

0.09

0.09

0.095

0.2 0.15

0.22

0.045

0.008 0.025

0.4

0.4

0.4

0.3

0.4

0.5

0.05

0.4

0.4

0.4

0.4

0.05

0.4

0.55

0.55

0.45

0.45

0.2

0.2

0.4

0.1

0.1

0.4

Si

Mechanical properties

NiAl N ppm

(max)

Cr Cu Mo Nb V Ti YS MPa

(Min)

UTS MPa

(Min)

%Elong BT180° Impact

Test

2t

1.2t

0.5t

1t

1t

2t

2t

2.5t

2.5t

1.5t

1.5t

1t

1.5t

1t

2t

2.5t

2.5t

0.5t

0.5t

0.5t

0.5t

0.5t

0.5t

22 on GL-5.65vA

22 on GL-5.65vA

20 on GL-5.65vA

20 on GL-5.65vA

27 on GL-5.65vA

27 on GL-5.65vA

25 on GL-5.65vA

21 on GL-5.65vA

21 on GL-5.65vA

21 on GL-5.65vA

28 on GL-5.65vA

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

30 on GL-50 mm

30 on GL-50 mm

14 on GL-

17 on 50mm GL

17 on GL-50 mm

14 on GL-50 mm

24 on GL-5.65 A

22 on GL-5.65vA

23 on GL-50 mm

21 on GL-5.65vA

25 on GL-5.65vA

IS 2062-2011 E300IS 2062-2011 E450

IS 2062E350

IS 2062E350

JISG3106SM490A.B

JISG3106SM490A.B

IS:2062E450 Cu

BO (Fe570)IS:2062E450 Cu

BO (Fe570)Telco

SS4012ATelco

SS4012A

Tata MotorE-38

BSK 46,TR46, E-46

BSK46/Tata Motors

E-46

Tata MotorsE-46

IS 2062 -2011 E550

IS 2062-2011 E650

SS 4082(TATA)/Domex 650

SRDPS 60/Domex550MC/ 80KSi

4.5 - 10.0

DP-600

IS 2062-2011 E300

IS 2062-2011 E300

IS 2062-2011 E250

IS 2062-2011 E300

DIN EN 10149QSTE 420

JISG3113SAPH440

JISG3113SAPH440

JISG3134SAFH540

JISG3134SAFH590

JIS G3113SAPH 440

JIS G3113SAPH 440

5.0 - 10.0

900 - 1560

3.0 - 8.03.5 - 8.04.0 - 8.04.5 - 8.0

1.75 - 3.992.4 - 3.992.6 - 3.993.0 - 3.99

DIN EN 10149S460MC

WIR006 -Issue C

1.6 - 3.992.5 - 3.992.8 - 3.9

SS Gr 50,HSLA GR50

CL-1/2

4.0 - 8.0

8.01 - 16.0

3.0 - 4.54.0 - 4.5

1.6 - 3.01.8 - 3.0

2.5 - 5.993.0 - 5.99

6.0 - 16.06.0 - 15.0

4.51 - 20.0

3.0 - 8.0

8.01 - 12.0

2.5 - 8.02.4 - 8.03.0 - 8.0

900 - 1560

900 - 1560

900 - 12601261 - 1560

900 - 11401141 - 12501251 - 1560

ASTM A 57207 Gr50 Type 1

ASTM A 57207 Gr50 Type 1

ASTM A 1011-07, ASTM A572 Gr 50

En10025Fe510B

En10025Fe510B

KLL - 004

DIN17100St 52.3

DIN17100St 52.3

900 - 12501251 - 13501351 - 1520

900 - 1520

900 - 12501251 - 1560

900 - 13501351 - 1560

900 - 13501351 - 1560

900 - 1560

4.0 - 6.04.0 - 6.0

2.7 - 5.0

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 11401141 - 12501251 - 14501451 - 1560

900 - 1260

900 - 1560

0.12

900 - 12501251 - 13501351 - 14501451 - 1560

1.75 - 3.992.4 - 3.992.6 - 3.993.0 - 3.99

DIN EN MC10149 S460

4.0 - 14.0

KLL 022

900 - 1560

900 - 1560

3.01 - 12.0

2.0 - 10.0

900 - 1260

900 - 1500

0.12

0.1 1.5

1.6

8.0 - 15.0

3.0 - 5.0

6.0 - 14.0 1.2

1.35 0.04

4.0 - 6.0

2.6 - 4.5

2.6 - 4.5

900 - 1560

900 - 1260

0.21

0.1

1.35 0.04 0.04

0.21 1.35

0.6

0.04

0.04

0.025

0.065

0.2

1.15 - 1.2

1.5

0.23

0.2

0.12

0.12

0.1

0.1

0.1

0.12

0.7

0.7

1

1

1

1

0.12 1.8

2 0.015

0.1 1.7

2

0.12 1.0

0.21

0.21 1.35

1.35

0.25 1.35

0.23900 - 1520 1.35

0.2

0.17

1.5

0.22

0.22

1.6

1.6

1.2

900 - 1250

900 - 1560

0.04

0.05

0.05

0.04

0.045

0.045

0.03

0.03

0.03

0.025

0.025

0.025

0.04

0.035

0.04

0.04

0.01

0.015

0.05

0.04

0.025

0.03

0.04

0.025

0.025

0.025

0.025

0.03

0.02

0.025

0.01

0.01

0.04

0.045

0.03

0.03

0.025

0.025

0.025

900 - 1560

0.025

0.015

0.04

0.025

0.025

0.015

0.04

BIS JIS EN SAE/

ASTMOthers Thickness Width Mn S PC

Equivalent Grade Dimensional Scope Chemical Composition(% max unless otherwise specified)

(mm) (mm)

900 - 14501451 - 1560

70 71

High tensile structural application

0.45

0.45

450

450 570

570

240 410

410

410

410

410

410

250

250

240

250

250

0.02

0.020

0.020

120

120

120

120

120

120

0.02

0.02 -0.35

0.02 -0.35

0

0

0.4

0.4

0.4

0.4

Si

Mechanical properties

NiAl N ppm

(max)

Cr Cu Mo Nb V Ti YS MPa

(Min)

UTS MPa

(Min)

%Elong BT180°

2.5t

2.5t

2t

2t

2t

2t

2t

2t

25 on GL-

5.65 A

20 on GL-

23 on GL-5.65 A5.65 A

23 on GL-5.65 A5.65 A

25 on GL-5.65 A

23 on GL-5.65 A

23 on GL-5.65 A

5.65 A

20 on GL-5.65 A

BO(Fe570IS:2062E450 Cu

BO(Fe570)

Gr-3,IS2062 A, B

IS 10748

IS 10748Gr-3,IS

2062 A, BJIS G 3103

Ss400

IS 2062E-250

IS 2062E-250

IS 2062Fe 410WA, WB

IS 2062Fe 410WA, WB

IS:2062E450 Cu

ASTM - ST42.3

A36M

ASTM - A36M

3.0 - 4.54.0 - 4.5

3.0 - 8.04.0 - 8.0

5.01 - 20.0

2.5 - 5.03.0 - 5.0

8.01 - 16.08.01 - 12.0

900 - 13501351 - 1550

900 - 12501251 - 1550

900 - 1550

1351 - 15001501 - 1550

900 - 13501351 - 15001501 - 1550

900 - 1550

900 - 12501251 - 1560

4.51 - 20.0 900 - 1560

2.4 - 6.4 900 - 1350

2.4 - 7.02.5 - 7.03.0 - 7.0

7.01 - 20.0

0.23

0.16 1.2

1.2

0.045

0.23

0.22 1.6

0.22 1.6

0.16

1.5

1.5

1.5

1.50.22

0.22

0.045

0.045

0.04

0.045

0.04

0.045

0.04

0.045

0.045

0.045

0.045 0.045

0.04

0.045

0.045

BIS JIS EN SAE/

ASTMOthers Thickness Width Mn S PC

Equivalent Grade Dimensional ScopeChemical Composition

(% max unless otherwise specified)

(mm) (mm)

Chequered sheets and plates for structural use

0.04 0.04

0.04 0.04

240

240

410

410

0.4 120

1200.4

S Si

Mechanical properties

P Al N ppm

(max)

YS MPa

(Min)

UTS MPa

(Min)

%Elong BT180°

2t

2t25 on GL-5.65√A

25 on GL-5.65√A

ASTM A36,ASTM A786

ASTM A36,ASTM A786

IS 2062 GrA, IS 3502

IS 2062 GrA, IS 3502

2.5 - 6.03.0 - 6.0

900 - 12501251 - 1350

6.01 - 10.0 900 - 1500

0.22 1.6

0.22 1.6

BIS JIS EN SAE/

ASTMOthers Thickness Width MnC

Equivalent Grade Dimensional ScopeChemical Composition

(% max unless otherwise specified)

(mm) (mm)

Structural and general engineering

0.45

0.4

355

345

490-630

450

240 410

410310

355

540

410

410

450

450

450

450

450

490-615

490-615

410

250

250

345

345

345

345

345

375

375

275 410-560

490-630

0.01 - 0.07 70

120

120

75

90

90

120

120

120

120

120

120

120

0.02 - 0.06

27J at270C

27J at270C

30J at200C

0.01 - 0.06

0.01 - 0.06

0.005-0.05

0.005-0.05

0.005-0.05

0.005-0.05

0.02 -0.035

0.005 -0.05

0.005

0.005

0.035

0.4

0.1

0.4

0.55

0.4

0.4

0.4

0.4

0.4

0.06

0.06

0.4

0.45

0.45

Si

Mechanical properties

NiAl N ppm

(max)

Cr Cu Mo Nb V Ti YS MPa

(Min)

UTS MPa

(Min)

%Elong BT180° Impact

Test

2t

1.5t

2t

2.0t

1.5t

2t

2t

2t

1.5t

2t

2t

1.5t

1.5t

1.5t

2t

2t

22 on GL-5.65 A

22 on GL-5.65 A

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

25 on GL-5.65 A

21 on GL-50 mm

23 on GL-5.65 A

22 on GL-

22 on GL-5.65 A

20 on GL-5.65 A

23 on GL-5.65 A

23 on GL-5.65 A

23 on GL-5.65 A

5.65 A

IS 2062-2011 E250

IS 2062E250 (Fe 410

WA &WB)

IS 2062-2006 E 250A

IS 2062-E 250 A, B

IS 2062-E 250 A, B

IS 2062E 350 BR

IS 2062E 350 BR

IS 2062-2011 E350

IS 2062 -2011 E410

EN 10025S355JR

EN 10025S355JR

EN 10025S355JR

ASTM A 572Grade 50

ASTM A 572Gr 50 Type I

IS 2062E350 BR

ASTM A 572 Gr42 (290); ASTMA 515 GR 60(415); ASTM A1011 SS & HSLAGr 45

EN 10025-2-2004 S275JO

4.0 - 20.05.0 - 20.0

2.0 - 16.02.2 - 12.02.5 - 12.03.0 - 12.0

2.2 - 10.03.0 - 10.03.5 - 10.00.4 - 10.0

2.2 - 10.02.5 - 10.03.0 - 10.03.5 - 10.04.0 - 10.0

2.2 - 10.02.5 - 10.03.0 - 10.03.5 - 10.04.0 - 10.0

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

10.01 - 20.0

4.0 - 12.0

12.01 - 20.0

ASTM A572Gr.50 Type I

ASTM A572Gr.50 Type I

ASTM A572Gr.50 Type I

ASTM A572Gr.50

ASTM A572Gr.50

ASTM A572Gr.50

ASTM A572Gr. 50 Type I

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

900 - 1560

4.0 - 20.04.0 - 16.0

6.0 - 16.0 900 - 1560

900 - 12701271 - 13601361 - 14501451 - 1560

900 - 13501351 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12501251 - 13501351 - 14501451 - 1560

900 - 12501251 - 1560

2.0 - 10.02.5 - 10.02.8 - 10.03.2 - 10.04.0 - 10.0

900 - 11401141 - 12501251 - 13501351 - 14501451 - 1560

2.2 - 8.02.4 - 8.03.0 - 8.03.5 - 8.0

900 - 12501251 - 13501351 - 14501451 - 1560

2.0 - 8.02.5 - 8.03.0 - 8.03.2 - 8.0

2.0 - 8.02.5 - 8.03.0 - 8.03.2 - 8.0

En10025S355JR

SAE 1018

SAE 1018

ASTM A 1011 SS& HSLA Gr 55/60;ASTM A 572 Gr 55

TATA 55HF

900 -1560 0.2 1.510.01 - 20.0

1.35 0.04

10.01 - 20.0

10.01 - 15.0

4.0 - 12.5 900 - 1350 0.22

0.2

1.5 0.045 0.045

0.16 - 0.2 0.3-0.4

0.05

0.04

0.04

0.18 -0.22

1.5

1.35

0.23

0.23

0.2 1.5

0.23 1.35

0.23 1.5

0.75 - 0.9

0.15 -0.2 1.2 - 1.7

0.2 1.5

1.6

0.22 1.35

0.22 1.35

0.23 1.35

0.23

0.23

1.5

0.6 - 0.9

0.05

0.05

0.045

0.045

0.04

0.04

0.05

0.045

0.045

0.04

0.03

0.03

0.04

0.045

0.015

0.045

0.025

0.05

0.05

0.05

0.04

0.045 0.045

0.045 0.045

0.045

900 - 1560

900 - 1560

900 - 1560

900 - 1560

0.04

0.04

0.04

0.045

BIS JIS EN SAE/

ASTMOthers Thickness Width Mn S PC

Equivalent Grade Dimensional ScopeChemical Composition

(% max unless otherwise specified)

(mm) (mm)

900 - 12501251 - 13501351 - 14501451 - 1560

7372

High tensile structural application

0.5

0.4

0.015

0.02 - 0.05

355

380-460

430-550

460-550

460-550 380-460

250 410

410255

460

375 500

450

450

450

450

450

450

450-530

490-630

490-630

490-630

490-630

490-630

517-630

550

345

345

345

345

345

355

355

355

355

355

355

420 - 490 520 - 620

300 - 400 440 - 520

440 - 520

520 - 670

305 - 400

325 - 405

0.4 0.02 - 0.05

120

120

90

90

120

120

120

120

120

0.02 - 0.06

0.02 - 0.05

0.02 - 0.05

27J at00C

0.02 - 0.07

0.2 0.2 0.20.06 0.06 0.008

0.005-0.05

0.005-0.05

0.09 0.2 0.15

0.06

0.09

0.09

0.2 0.15

0.22

0.095 0.045

0.008 0.025

0.02

0.4

0.5

0.3

0.4

0.4

0.05

.06

0.4

0.4

0.4

0.4

0.05

0.55

0.55

0.55

0.55

0.55

0.55

0.06

Si

Mechanical properties

NiAl N ppm

(max)

Cr Cu Mo Nb V Ti YS MPa

(Min)

UTS MPa

(Min)

%Elong BT180° Impact

Test

0.5t

0.5t

1t

1t

1t

2.5t

2.5t

1.5t

1.5t

2t

2t

2t

2t

3t

3t

3t

3t

2.0t17 on GL-50mm

20 on GL-5.65 A

20 on GL-5.65 A

20 on GL-5.65 A

20 on GL-5.65 A

22 on GL-5.65 A

22 on GL-5.65 A

28 on GL-5.65 A

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

21 on GL-50 mm

17 on GL-50 mm

17 on GL-50 mm

14 on GL-50 mm

23 on GL-50 mm

23 on GL-

25 on GL-5.65 A

21 on GL-5.65 A

5.65 A

JIS G3113

IS 2062

A, B, C.

IS 2062-2011 E250

IS 2062-2011 E300

IS 2062-2011 E450

IS 2062-E350

IS 2062E350

IS 2062E350

IS 2062-2011 E350IS 2062-2011 E350

IS 2062-2011 E350

IS 2062-2011 E350

IS 2062-2011 E351

IS 2062-

2011 E300

JIS G3113

SAPH 440

SAPH 440

JISG3106SM490A.B

JISG3106SM490A.B

JISG3106SM490A.BJISG3106

SM490A.B

JISG3106SM490A.B

JISG3106SM490A.B

JIG3101 &

EN10025Fe510B

EN10025Fe510B

EN10025Fe510B

EN10025Fe510B

EN10025Fe510B

EN10025S355

DIN17100St 52.3

DIN17100St 52.3

DIN17100St 52.3

DIN17100St 52.3

DIN17100St 52.3

ASTM A572 Gr 65

DIN17100

EN 10149-2ST355MC

DIN EN10149-QSTE

380

DIN EN10149-QSTE

380

JISG3106SS400 &SM

ASTM A570,D & 45

S275JRS275JO

St 44.2,St 44.3

WIR006 -Issue C

2.5 - 12.53.0 - 12.52.5 - 5.02.6 - 5.02.8 - 5.03.0 - 5.0

2.4 - 3.992.6 - 3.993.0 - 3.99

1.6 - 3.992.5 - 3.992.8 - 3.99

1.6 - 3.992.5 - 3.992.8 - 3.99

2.5 - 5.993.0 - 5.99

6.0 - 16.06.0 - 15.0

2.5 - 6.03.0 - 6.0

2.5 - 4.993.0 - 4.99

900 - 12501251 - 1450

900 - 12501251 - 1560

ASTM A 572Gr 50

ASTM A 1011-07, ASTM

A 572 Gr 50

ASTMA 572- 07

Gr50 Type 1

ASTM A572 Gr50

SS Gr 50HSLA Gr50CL-1/2

900 - 12501251 - 13501351 - 1520

900 - 12501251 - 13501351 - 1520

900 - 13501351 - 1560

900 - 13501351 - 1560

4.0 - 6.04.0 - 8.0

2.7 - 5.0

900 - 14501451 - 1560

1251 - 13501351 - 14501451 - 1560

900 - 11401141 - 12501251 - 14501451 - 1560

900 - 12501251 - 1550900 - 12501251 - 13501351 - 14501451 - 1560

1251 - 14501451 - 1560

3.0 - 8.03.5 - 8.0

DIN EN MC10149 S460

En100025 ASTM A283 &

1.75 - 3.99

KLL 022

900 - 1560

900 - 1560

900 - 1250

2.9 - 6.0

5.0 - 15.0

12.01 - 16.0

900 - 1500 0.1 1.58.0 - 15.0

6.0 - 15.0

4.0 - 8.0 1.35 0.04

4.0 - 8.0

6.0 - 14.0

DIN17100 2.0 - 8.0

4.0 - 14.0

4.0 - 14.0

900 - 1560

900 - 1560

0.2

0.2

1.2 0.03 0.03

900 - 1250 0.22 1.6

KLL - 004

0.04

0.025

0.04

0.21

0.21

1.35

1.35

0.23

0.25

0.23

0.2

0.2

0.2

0.2

1.6

1.6

1.6

1.6

1.65

0.12 1.5

0.21 1.35

0.12 1.0

1.0

0.21 1.35

0.12 1.6

0.25 1.35

0.25 1.35

0.17 1.2

0.2

0.2

1.5

1.5

1.35

900 - 1550

900 - 1250

0.02

0.04

0.04

0.04

0.04

0.04

0.04

0.04

0.045

0.025

.035

0.035

.04

0.01

0.015

0.04

0.05

0.04

0.025

0.025

0.025

0.025

0.04

0.05

0.05

0.05

0.02

0.05

0.04

0.04

0.04

0.04

0.04

0.04

0.04

900 - 1520

900 - 1560

900 - 1560

0.025

0.04

0.04

0.04

0.015

BIS JIS EN SAE/

ASTMOthers Thickness Width Mn S PC

Equivalent Grade Dimensional ScopeChemical Composition

(% max unless otherwise specified)

(mm) (mm)

900 - 1260

74 75

Hot Rolled Coils are used in a variety of applications

• Automobiles

• Boiler and Pressure Vessels

• Ship Building

• Railways

• Transmission Towers

• Oil and Petrochemicals

• Coal and Mining

• General and Heavy Engineering

The Ultimate Test

7776

Sales OfficesCorporate Head OfficeJSW Steel Ltd.JSW CentreBandra Kurla Complex, Bandra (East), Mumbai - 400 051Tel.: +91 22 - 42861000 | Fax: +91 22 - 42863000

7978

Sales OfficesAHMEDABADOffice no. 501 & 502Mondeal Heights, B-wing Iscon Cross Road,Near Novotel Hotel, opp. Karnavati Club, S. G. Highway, Ahmedabad-380 054Mobile: 09427334449Tel: 079-49000270/271/272/273/274/275

BENGALURUThe Estate,3rd Floor, West Wing, 121,Dickenson Road, Bengaluru - 560 042Tel: 080-42448888

CHENNAI5th Floor, KRM Plaza, No. 2,Harrington Road, Chetpet, Chennai - 600 031Tel: 044-28297420, 28297422

COIMBATORET. V. Swamy Road (West), Coimbatore - 641 002Tel: 0422-2541870

DELHINTH Complex (4th Floor),A-2, Shaheed Jeet Singh Marg,Qutub Institutiuonal Area, New Delhi – 110016Tel: 011-48178600 | Fax: 011-48178699

FARIDABADPiyush Global I Building1st Floor, Plot No.5, Opposite Escorts Mujesar Metro Station Main Mathura Road, NH-2, YMCA Chowk, NIT Faridabad - 121006, HaryanaTel: 0129-2239248, 2232387

NOIDA14A, Industrial Area, Buland Shar Road,Ghaziabad - 201 009Tel: 0120-3262875, 2867142

GUWAHATI106, 3rd Floor, Meer Market, Maszid Lane, Kamarpatty, Guwahati - 781 001Tel: 0361-2730054

HYDERABAD7th Floor, Surya Towers, 105, Sardar Patel Road,Secunderabad - 500 003Tel: 040-27846669/79

INDORE3rd Floor, Lakshya Badgara, 13/1,New Palasia, Near Curewell Hospital, Indore - 452 001Tel: 0731-2532156/57/58/59, 4043613

JAIPUREvershine Tower, F-1, 705, 7th floor,Amarpali Circle, Vaishali Nagar, Jaipur - 302 021Tel: 0141-4026760/62/63/64

KANPURRoom No.105, Ratan Esquire, Chunniganj,Kanpur - 208 001Tel: 0512-3271907

KOCHIMitsun Enterprise, 30/1854 B4, 1st Floor, PonnurunniRoad, Chalikkavattom Junction, Vytilla P.O.,Kochi - 682 019Tel: 0484-4026392/4063294

KOLKATAGodrej Waterside, 10th floor, Tower - 1, Unit No. 1003,Block - DP, Plot - 5, Sector V, Salt Lake City, Kolkata - 700 091,Tel: 033-40002020 | Fax: 033-40002021

LUDHIANA109, Modelgram, Near Kochar Market, Opp. MalwaSchool, Ludhiana - 141 002Tel: 0161-6578944, 6450816

MUMBAIGrande Palladium, 6th Floor, 175,CST Road, Kalina, Santacruz (East),Mumbai - 400 098Tel: 022-61871000

NAGPURPoonam Plaza, Palm Road, Civil Lines, Nagpur-440 001Tel: 0712- 2520333

PATNA1, Tilak Nagar East, Behind Patna Diesel, Kankarbagh, Patna - 800 020Tel: 08002230517

PUNEEpicentre2nd Floor, CTS No. 4/6, Above Royal Enfield ShowroomShivajinagar, Wakdewadi, Pune - 411005Tel: 020-64104547, 27111427

RUDRAPURPlot No. 264, By Pass Road, Village Kishanpur, Kichha, District Udam Singh Nagar, Uttrakand - 263 148Tel: 05944-263290

Middle East OfficeJSW Steel Ltd. (DMCC Branch)Unit 309 | X - 3 Tower | Jumeirah Lakes TowersDubai, UAE P.O. Box # 33650Tel.: +971 4 4385286 | Fax: +971 4 4385297Mobile: +971 55336097