Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Spea
kerC
raft®
Access your iPod® from any room in your home.
iPod® and the MZC
SpeakerCraft
The MZC/iPod Interface kit is designed to control all iPod models with Dock Connector*. The naviPod provides five commands; volume up, volume down, pause/play, next track and previous track. SpeakerCraft's naviPod kit includes a 5-button infrared remote control and a receiver unit that plugs directly into the top of the iPod. Also included is a SpeakerCraft IR emitter and four iPod replacement buttons. This kit combined with our MZC-66 Multi-Zone Controller, provides several additional codes to add more functions than are available with the naviPod alone.
* Some Models Dock Sold Seperately, Not Compatible With iPod mini or iPod shuffle.
SpeakerCraft's MZC/iPod Interface kit, with the MZC-66 system offers:
• Mute• Next Chapter• Next Play list• Next Track/Scan Fwd • Pause• Play/Pause• Play/Resume• Power Off• Power On• Previous Play list• Previous Track/Scan Reverse• Previous Chapter• Repeat• Stop• Volume Up• Volume Down
The enhanced naviPod code library is available on our web site and can easily be added to the existing libraries in EZ-Tools.
Once the IR codes are entered for the EZ-Pad buttons in their respective positions, the user can then control and distribute their iPod tunes throughout the house by the simple placement of an IRE-1.0 emitter on the face of the naviPod. Connect the iPod through its base to an audio input on the MZC-66. Connect the IRE-1.0 to the respective IR output port on the MZC-66 and the system is complete.
Installation:
• Insert the naviPod into the top jack on the iPod.• Place the IRE-1.0 emitter over the IR window of the naviPod.• Plug the emitter to the respective IR jack adjacent to the source input jacks on the MZC-66 where the iPod is connected.• Download the latest EZ-Tools program from the SpeakerCraft web site. This contains the 17 infrared commands for the naviPod. They are listed under Apple in the CMD Library tab of EZ-Tools.• Enter the appropriate function codes for the appropriate keypad buttons using EZ-Tools.• Download programing to the MZC-66 via the Transfer Cable.
®940 Columbia Ave. Riverside, CA 92507 (800) 448-0976 Fax (951) 787-8747www.speakercraft.com
LIT07001(rev1)
How It's Done
iPod is a registered trademark of Apple Computer, Inc. naviPod is a registered trademark of TENtechnology, a division of TEN Ventures Inc.
VCR DVD
MUTE
iPod CD
PWR
BASS TREB
TNR AUX
VCR DVD
MUTE
iPod iPodCD
PWR
BASS TREB
TNR AUX
iPod
VCR DVD
MUTE
CD
PWR
BASS TREB
TNR AUX
VCR DVD
MUTE
iPod CD
PWR
BASS TREB
TNR AUX
VCR DVD
MUTE
SAT CD
PWR
BASS TREB
TNR AUX
VCR DVD
MUTE
SAT CD
PWR
BASS TREB
TNR AUX
iPod
IRE-1.0Infrared Emitter
iPod®
With naviPod™ &Dock Attached
MZC-66 Multi-Zone Controller
Control Up to Six Different Rooms in Your Home, Using EZ-PAD Keypads and CAT-5 Cable
Analog Audio Output
LIVING ROOM DINING ROOM
FAMILY ROOM PATIO
MASTER BEDRM KIDS ROOM
SpeakerCraft®
MASTER POWER
ZONE STATUS
3 4
5 6
1 2
MZC-66
MENU
Apple® and SpeakerCraft, The Future of Distributed Audio.
naviPod™
IR Receiver
SpeakerCraft IR Emitter
naviPod™ Remote
iPod® Replacement
Keypad Buttons
Analog AudioOutput Cable