INFINITY · 2021. 6. 20. · Established in April 2014 name under “INFINITY Enterprise”. After six years of ups & downs in business we decided to expand our thought Process, Team,Business

www.infinitymspl.com

Measurement Solutions Pvt Ltd

We Make Your Measurement EASY

INFINITY

http://www.infinitymspl.com/

Established in April 2014 name under “INFINITY Enterprise”. After six years of ups & downs in business we decided to expand our thought Process, Team, Business Portfolio & Much more. So as part expansion we rename as “INFINITY Measurement Solutions Pvt Ltd" We comes up with clear vision, good technical team & more strong association with our solution providers. Our business enter in new era, we are more focused on Customer & Team satisfaction, Product solution & On time service support.

To Become the most successful and trusted company for supply & service ofMeasurement Solutions

Quality Commitment: Supply superior quality product & service to help andimprove product quality of our customer.Customer Benefit: We create sustainable and outstanding benefit for our customer.Employee Empowerment: Create growth orientated work place, focus onculture of mutual trust, work life as team, respect to each other that boost empowerment in employees.

Business Goal: Go Onto Another Level in best product supply & serviceOur Strength: We work as team with supplier & customerWe Believe: We'll never stop experimenting, collaborating and learning for our team & customer.

OURValued Partners

Val

ue

Mis

sion

Vis

ion

Testing Applications we serve…

ELECTRICAL EQUIPMENT TEST & MEASUREMENT DIVISION

Power Transformer Testing


Digital SubstationTesting

Transmission Lines & Towers Testing/

Monitoring

Instrument Transformer

Testing

Substation AssetManagement

Motors & Generators Testing

Gas Insulated Substation Testing

Underground Cable Fault & Diagnostics

System

Battery Testing & Monitoring


PowerTransformer&InstrumentTransformer Application

Insulation Tester Insulation Resistance “Go/ No-Go” Test System for knowing insulation properties of Power equipment.Offers test voltage 250V, 500V, 1kV, 2.5kV, 5kV, 10kV & 15kV to measure IR(t), PI, DAR, Step, Ramp etc.

AC/ DC Hi-Pot KitsMV, HV & EHV Voltages sources check Di-electric Strength of insulating material in various application such as Power Transformer, CT/ VT, Breaker, Underground Cables, Rotating machines etc.

TESTRANO 600Turns Ratio & Winding Resistance Test Kit

CPC 100Multifunction Transformer Test Kit having Universal Primary Injection test System for Electrical Diagnostics

TESTRANO 600 Or CPC100 + CP TD12/ 15Expanded for Tan Delta & Capacitance Kit

CPC 80 + CP TD12/ 15Dedicated Dissipation/ Power Factor Test System

FRANEO 800Sweep Frequency ResponseAnalyser ( SFRA) for Core &Winding Diagnostics

DIRANADielectric Response Analyser for Moisture determination in Oil Paper Insulation

CPC SyncPortable HV Source for Partial Discharge & Voltage withstand tests on Dry-Type Transformer

TANDO 700High precision test system for Dissipation/ Power Factor & Capacitance Measurement

CT AnalyserCurrent Transformer Test & Calibration System

VOLTANO 100Voltage Transformer Test & Calibration System

COMPANO 100Portable Primary & Secondary Injection & basic Protection Test Set

Primary Test Manager (PTM)The Primary Test Manager (PTM) software supports you during diagnostics tests on Current & Voltage Transformer, Circuit Breaker, Rotating Machines, Grounding Systems, Power Transformer as well as its associate equipment such as Bushings & On-Load tap Changers(OLTC)

A high-performance database ensures that the installed equipment & the associated test plans can be manages easily. With the module “PTM DataSync”, you can synchronise your database to central server in order to share & consolidate important asset information company-wide

Power Transformer Routine System



Insulating Oil Testing, Analysing & Handling Systems

Oilport 30Handheld Insulating Oil Moisture in ppm measuring probe.

EE360Online Insulating Oil Moisture in ppm Transmitter

Karl FischerHighly accurate LaboratoryTest Set to know Moisturein Insulating Oil

OilQSenseOnline Process Sensor for measuring Insulating Oil parameters such as ppm, Tan Delta, Permittivity etc.

DTA 100 CAs a high-performance device with a test voltage up to 100 kV, with clear breakdown detection and absolutely reliable measurement results even across several measurement sequences Fully automatic

Breakdown Voltage measurement sequence

Suitable for mineral or silicone oils and ester liquids

Reliable, reproducible measurement results using the latest measurement technology

Designed for daily continuous operations in laboratories

DTL CIts established analysis and diagnostic testing of insulating oil can deliver valuable findings in scientific work, research and development. It offers the latest and most precise information for efficient oil management in plants in the electricity and other industries. Fully automatic

dissipation factor measurement

Pre-programmed standards

Maximum accuracy

Oil Filtration & Pumping System Its an on-site portablefiltration unit designed for removal of Water, Solid Particles from Lube and Dielectric Insulation Oils

Oil Processing UnitIt unit is designed for degassing, drying, heating and filtration of mineral transformer oil, as well as evacuation of transformer tanks.


MPD 500/ MPD 600Basic & High-end Partial Discharge System for Routine & Acceptance tests

PDL 650Acoustics Partial Discharge Localization Test System

MONTESTO 200Portable & Online Partial Discharge Measurement & Temporary Monitoring System for various electrical assets

MPD 800Universal Partial Discharge Measurement & Analysis System

Partial Discharge Measurement System

In the process of oil regeneration, oil degradation products and acidic compounds are removed, the oil becomes clear, oxidation resistance is improved, while gas solubility is reduced.

Oil Regeneration Unit This systems are designed to extend transformer service life by restoring the dielectric strength and chemical composition of dielectric insulating oil




ProductModel

HYDROCAL 1001+

HYDROCAL 1003

HYDROCAL1004 genX

HYDROCAL 1005

HYDRPCAL1006 genX

HYDROCAL 1008

HYDROCAL 1009

Gas-in-oil H2, CO, CH4, H2, CO H2, CO, C2H2 H2, CO, C2H2, H2, CO, CH4, H2, CO, CO2, H2, CO, CO2,Analysis C2H2, C2H4, (individual) (individual) C2H4 C2H2, C2H4 CH4, C2H2, CH4, C2H2,

C2H6 (individual) (individual) C2H4, C2H6 C2H4, C2H6, O2(composite) (individual) (individual)

Moisture in oil Analysis (H2O)

Offshore version

Communicatio TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP TCP/IPn (options) RS 232

RS 485 RS 485 RS 485 RS 485 RS 485 RS 485 RS 485MODBUS MODBUS MODBUS MODBUS MODBUS MODBUS MODBUS

IEC 61850 IEC 61850 IEC 61850 IEC 61850 IEC 61850 IEC 61850DNP 3.0, DNP 3.0, DNP 3.0, DNP 3.0, DNP 3.0, DNP 3.0,GSM/ GPRS/ GSM/ GPRS/ GSM/ GPRS/ GSM/ GPRS/ GSM/ GPRS/ GSM/ GPRS/3G 3G 3G 3G 3G 3G

Transformer Monitoring Option Option

Portable Dissolved Gas AnalyserHYDRCAL 1011 genX P is a portable device for the analysis of dissolvedand free gases from the isolation fluid of oil-filled power transformers and other electrical equipment.Key Features•Individually measures moisture in oil (H2O) and the key gases hydrogen (H2), carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), acetylene (C2H2), ethylene (C2H4), ethane (C2H6), oxygen (O2), nitrogen (N2) and propane (C3H8) dissolved in transformer oil.• Moisture in oil (H2O) measurement•Maintenance-free near infrared measurement system with head-space gas extraction acc. IEC 60567• Operation by integrated 7” colour TFT (800x480 pixel) touchscreenor via genX webserver from any smart phone, notepad or PC• Communication interfaces Wi-Fi, USB or ETHERNET 10/100 Mbit/s•SD memory of test results, history and diagnostic data of power transformers and oil-filled electrical equipment• Integrated thermal report printer

Online Dissolved Gas AnalyzerHYDROCAL Series offers a broad range of products and solutions for the online gas-in-oil monitoring of transformers (online DGA). With its individual and modular system components MTE provides the optimal customer oriented solution for utilities, industries and transformer manufacturers.

Analysis of the gases dissolved in power transformer oil is recognized as the most useful tool for early detection and diagnosis of incipient faults in transformers. The cost effectiveness of online dissolved gas analysis (DGA) and control systems are gaining importance worldwide.



CircuitBreaker &Switchgear (GIS)Application

Timing Measurement on Gas-InsulatedSwitchgear with grounding on both sides !

When measuring operating times on GIS with grounding onboth sides, testing methods such as Dynamic ResistanceMeasurement (DRM) don’t deliver reliable results due to thelow-ohm ground connections that run parallel to the circuitBreaker. CIBANO 500 provides new & simple solution to thisproblem, which allows operating times to be determinedaccurately despite the fact that GIS is grounded on bothsides.

When a timing measurement on a GIS breaker must beperformed with both side grounded, CIBANO 500 offers the

possibility to use the new current sensor measurement method (CSM).

The CSM easily measures the operating times of the circuit breaker with an inductive sensor laid round the ground connection ofthe grounding switch. Nothing else needs to be modified.

It is a highly flexible measuring method, because the adjustable measuring sensor can be easily installed on a multitude of different grounding switches and performs precise timing measurements.

Did you know ?After timing measurements or high residual currents with transient DC components, there may be some residual magnetism left over in the GIS’s current transformer. CIBANO 500 also features the “CT Demagnetization“ function, which quickly & easily demagnetizes the current transformer after timing measurements.

COMPANO 100Portable Primary & Secondary Injection & basic Protection Test Set

CIBANO 500+ CB MC2 + CB TN3Circuit Breaker Test System for timing, micro-ohm and motion test with integrated power supply

CPC 100 + CP RCVoltage withstand test on GIS with Power Voltage Transformer

MPD 600/ MPD 800+ UHF 620High-end Partial Discharge Measurement & Analysis System for GIS. It Extends measurement range to VHF and UHF ranges

VITS60M/ 70M3in1 Multifunction Test Set, Includes Traditional Vacuum Interrupter Integrity Tester For Go/No-Go Pass/Fail Test Results, 2.5/ 5/ 10kV DC Mega-ohmmeter and 60kVdc Hi-Pot

MAC TS4Uses patented technology for determining & Predicting the condition and usable Life of vacuum interrupters in the field, shop or labs. Shop & Lab Use: Fixed & Flexible magnetic field coil test fixtures for testing vacuum interrupters removed from breaker ca be provided.

Vacuum Interrupter Testing

Routine Breaker Assessment Test System



CircuitBreaker &Switchgear (GIS)Application

SF6 Leak Detector Quick response time Quick “Reset“ time Detection of leaks of up

to 5 g / year Comfortable single-

handed operation Battery-operated (with

capacity check) Temperature-

compensated

SF6 Purity Analyzer Ease of onsite calibration

after every 2 year with plug & play new sensor

Fast charging, 8 operation battery capacity, onsite easy battery replacement & external power supply offer durability during testing.

500 test record storage Programmable 5

measurements at every 1 hr. interval gives better breaker analysis.

SF6 Leak Detection, Analysis & Handling Systems

SF6 Gas Filling, Recovery & Handling Cart Professional gas handling and SF6 recovery equally combines environmental protection and economic efficiency. DILO maintenance devices make the SF6 gas handling simple and efficient encompassing the following functions:

SF6 recovery SF6 purification and drying Storage of SF6 Evacuation of air or nitrogen Filling the gas compartments with SF6

SF6 Leak Detection In Enclosed GIS Substations Cost-effective and reliable solution for integral leak

detection. Superior sensitivity to detect SF6 leaks, even in large

indoor substation rooms Simple installation procedure, non-intrusive, not requiring

any outage on your installation Low maintenance needs. Calibration only required once a

year Direct detection method, independent from any pressure

or density reading State-of-the-art photoacoustic technique as referenced in

CIGRE’s #406 bulletin “SF6 Tightness Guide”

Modular/ Mini Series Piccolo Compact Series Mega Series

Product Model B095R12/ B093R30/ B143R11 L030R02

B057R03/ B52INDIA33/ B058R03/ B057R17/ L057R01

L170R01/ L400R01/ L600R01/ L600R02

Volumes recommended < 300 l 200 - 800 l 800 – 1,200 l 1000 – 2000 l/

> 2,000 l

Volume 300 l 600 l 1000 l 2000 l3000 l

Hose DN8, 5 m DN20, 5 m DN20, 5 m DN20, 5 m/ DN40, 5m

Final vacuum < 5 mbar < 1 mbar < 1 mbar/

< 5 mbar < 1 mbar

Recoverytime 144 min/ 164 min 146 min 117 min/ 188 min 93 min/ 118 min

Rating 66kV AIS 132 kV AIS,132kV GIS

765kV AIS,220kV GIS

765kV AIS,765kV GIS

Application MV Substation MV/ HV SubstationHV Substation/ Medium level OEM EHV Substation/ OEM



Camera Solution forvarious Application

Portable Thermal ImagerHandy Thermal Imaging Solution for Locating Hot Spot in various application such as Power Transformer, CT/VT, Breaker, Switchgear Panels, Transmission Lines, etc.Key Features Storage of Fast Infrared Sequences with up to 240 Hz 5.6“Extensive TFT Colour Display that Is Suitable for Daylight

with resolution of 1,280×800 pixels Integrated Viewfinder with Diopter Compensation for

Unrestricted Use under all Lighting Conditions Comprehensive Range of Precision Interchangeable Lenses

Enables for a Wide Range of Applications Integrated Laser Range Finder for Exact Detection of Object

Distances of up to 70m. Integrated GPS module is able to geographically recognize

the measurement location and can automatically locate aswell as archive thermal images.

Robust light metal housing with IP54 protection is ergonomically flexibly designed to provides reliable protection for the high sensitive optronics of the device.

Integrated automatic focusing digital camera with a resolution of 8 Megapixel, video function and LED video.

Corona CameraWith the combination of Visible, Thermal IR and UV inspections at the same time, save time and effort. Co-location of electrical discharges and hot spots give the inspector more insight into the cause of a fault.

GIS Borescope CameraOnline 24x7 Substation Equipment Hot Spot Monitoring avoids fatality by displaying Hot Spot Warning alert on centralize System & Alarm Sound for taking protective action.

Cooled FPA photon detector with (1,280 ×1,024) IR pixels

Opto-mechanical MicroScan with (2,560 ×2,048) IR pixels

High-speed mode enabling frame rates up to 622 Hz in full frame

Thermal resolution up to 0.02 K Extremely short integration times in the

microsecond range

Fixed Camera for various high-end research ApplicationKey features

Acoustic CameraThis camera shows Asset/ Equipment Electronic Image & inform us about leakage location by capturing acoustic sound origin in various application of power utilities in Motors, SF6 Gas leak, Gasket leak in transformers etc..

Handheld SF6 Leak Thermal Imager Handy Thermal Imaging Solution for Locating Hot Spot in various application such as Power Transformer, CT/VT, Breaker, Switchgear Panels, Transmission Lines, etc.



Camera Solution forvarious Application

Drone Thermal Imaging Camera Drone system is a specially designed thermo-diagnostic device. It is equipped with an LWIR micro-bolometric sensor with 640×512 px resolution (in the 7.5

– 13.5 μm range), and its ‘Super Resolution Mode’ functionality can deliver a finalthermogram in 1266×1010 px. resolution.

The RGB camera comes with Full HD (1920 x 1080 px) resolution and provides an absolutely unrivalled optical ultra-zoom – as much as 10x (6.9° to 58.2° field of vision).

It inbuilt internal SSD comes in two storage capacities 128 and 256 GB. Further, its data can be offloaded to an external USB drive or micro SD card as well.

It has a rugged, lightweight aluminum case and the most sensitive component i.e. camera lens, is protected by a replaceable protective cap made of germanium.

It offers an interface enabling the widest range of connections to the drone, the control unit, an external GPS sensor, and other devices. We provide a Wi-Fi low latency live video streaming and command link.

Drone SF6 Leak Thermal Imaging Camera It offers a highly precise thermal imaging with a sensitive, cooled MWIR quantum detector and

a resolution 320×240 and with a precise temperature sensitivity of 15 mK, which also enablesto detect gases in very small concentrations.

It is the ideal solution to detect leaks of hazardous gasses via drone system as there are options to change image and camera setting such as, emissivity, gas intensity range, camera type, and more through standard RC transmitters connected to the CAN bus or PWM inputs.

The thermal camera can also record measured data, including GPS coordinates and the wirelessHDMI transfer of images to the pilot.

Key features Replace error prone manual inspection process with

automated, continuous monitoring using thermal and visual imaging

Early and remote fault detection and alarm generation Monitor newly installed assets or older assets after

maintenance to identify risk for infant mortality or faults Identify transient thermal events not detectable with

manual inspections

Remotely monitor multiple, distant substations from a central location

Complete turn-key system with protocols for data export All data stored to a database for analysis, remote access,

and video playback Automated analysis with built-in industry standard analytics

Online Substation -AIS/GIS Monitoring Camera

Thermal imaging system is designed for continuously monitor the temperature profile of assets within an electrical power substation remotely.

Drone based Thermal Imaging Solution



ProtectionEquipment&DigitalSubstationTesting

CMC 4303-Phase Ultra-Portable protection test set & calibrator

CPC 3533-Phase Compact & versatile relay test set

CMC 3103-Phase Test set for basic testing

RelaySimTestSoftware for system based protection testing with CMC test set & ARCO 400

CMControl PIntuitive control option forsimple manual testing withCMC test sets

CMEngine Programming interface for controlling CMC test set with user specific software

CMC 3566-Phasere Universal relaytest set & commissioningtool

CMC 256plus6-Phase High precision relay test set

ARCO 400Universal test set for recloser controls

COMPANO 100Battery operated primary injection, secondary injection & basic protection test set.

Test UniversePC Software suite for advanced secondary testing with CMC test sets

PTLCreation of specific tes templates which adapt automatically to the actual relay settings.

ADMOMaintenance management solution for protection systems

Time GradingSoftware for easy creation of time grading schedules

OPERATIONMANAGEMENT PLANNING

+

CMC 850Protection test set dedicated to IEC 61850

Recloser Control Test set

1-Phase Test Set

Digital Substation Test Set

3-Phase Test Set

6-Phase Test Set

Software for Test Set



Distributed TemperatureSensing (DTS)This technology makes use of fiber optic sensor cables, typically over lengths of several kilometers, that function as linear temperature sensors. The result is a continuous temperature profile along the entire length of the sensor cable.DTS utilizes the Raman effect to measure temperature. An optical laser pulse sent through the fiber results in some scattered light reflecting back to the transmitting end, where it is analyzed. The intensity of the Raman scattering is a measure of the temperature along the fiber. The Raman anti-Stokes signal changes its amplitude significantly with changing temperature, the Raman Stokes signal is relatively stable.The position of the temperature reading is determined by measuring the arrival timing of the returning light pulse similar to a radar echo. This method is called OTDR (Optical Time Domain Reflectometry).Here it uses the Raman OTDR technology with some unique techniques such as code correlation technology and a single receiver design for both Stokes and anti-Stokes. This approach results in outstanding system reliability (immune to the effects of strain, which can lead to anomalous readings), accurate measurements and high performance, for which AP Sensing is known.

Distributed Acoustics Sensing (DAS)Various DAS / DVS technologies are used in the market, but the most common is based on Coherent Optic Time Domain Reflectometry (C-OTDR). C-OTDR utilizes Rayleigh back-scattering, allowing acoustic frequency signals to be detected over large distances. The interrogator sends a coherent laser pulse along an optical fiber (sensor cable) and scattering sites within the fiber cause the fiber to act as a distributed interferometer with a gauge length like the pulse length (e.g. 10 meters).Acoustic disturbance on a fiber generates microscopic elongation or compression of the fiber (micro-strain), which causes a change in the phase relation and/or amplitude.In the very low frequency range, phase-based C-OTDR systems enable the highly sensitive measurement of transient temperatures due to the elongation/compression of the fiber with temperature changes. This measurement mode is called DTGS (Distributed Temperature Gradient Sensing)With the combination of phase and amplitude measurements, our proprietary 2P squared technology offers low sensitivity to the fading signal commonly observed in other C-OTDR systems. Our DAS system provides constant performance over the entire fiber resulting in a high measurement quality.

Fibre-optic embedded Underground Cable Monitoring System

LV, MV & HV Underground Cable Fault Location

UndergroundCableFaultDetection&DiagnosticsSystem

Cable & Pipe LocatorThe CL 20 cable locator comprising a transmitter and a receiver is used to determine the exact location of cables and metal pipes. The ability to determine laying depths of up to 4.5 m and to measure signal currents at the touch of a button allows you to obtain reliable information on the position of the cable within the shortest time. Fast and exact location of position and laying depth of cables Intuitive operation – no special measurement knowledge required Lightweight and manageable

The UL 30 audio frequency system Locator Set is used to exactly determine the alignment of cables and metal gas or water pipes. With various accessories, this system becomes a universal, indispensable device for power companies, industries, installation companies and water suppliers. Output energy up to 50 VA Automatic or manual impedance adjustment Charging unit and rechargeable battery integrated; battery or mains operation Continuous or cyclical output




Time Domain ReflectometerTDR - IRG 2000 impulse reflection measurement unit or time domain reflectometer is a handy, easy to carry device for single-phase cable fault pre-location. It is used in combination with a surge voltage generator on low-, medium- and high-voltage cables 0 - 65 km in length. It can also be used on live cables carrying voltage up to 400 V.

Key Features Easy and quick cable fault location Light, compact and manageable Main unit for the tried-and-tested pre-

location method Ideal for integration in measurement systems

TDR - IRG 4000 time domain reflectometer is integrated in BAUR cable fault location systems and is used in combination with the system software for locating cable faults in single and three-phase cable systems.Thanks to the novel operational concept, cable faults can be located more rapidly and easilywith IRG 4000. The high-performance industrial PC and improved measurement parametersallow for a precise cable fault location in all cable types.The well-proven and continuously enhanced methods are available for the cable fault location as well as the newly developed Conditioning SIM/MIM method which makes it even more effective and quick to locate wet cable faults that are difficult to detect.

The SIM/MIM technology with 20 reflection measurements per HV pulse allows for selecting the best reflection image for a very precise determination of the fault distance.

Key features Easy operation thanks to intuitive operational concept Maximum precision with high resolution and sampling rate Precise fault location methods for every type of fault

LV, MV & HV Underground Cable Fault LocationCable Route Tracer & Depth MeasurementThe TG 600 audio frequency transmitter was designed specifically for the precise location of cable faults and joints using the twist method. The display of the input and output current makes selection of the correct adjustment easier. High-performance audio frequency transmitter up to 600 VA Frequency of 2 or 10 kHz, quartz-stabilized (other frequencies on request) Potential-free output Impedance adjustment in 8 steps from 0.3 to 300 Ω

Cable IdentificationKSG 200 cable identification system is used to identify single- and multi-core cables in a cable bundle or cable loom. By using the KSG 200, the risk of accidentally cutting a live phase is significantly reduced.Key Features Cable identification on all types of de-energized cables Reliable verification of the cable identification by means of the highly precise three-factor-analysis ATP Safe cable identification on live low-voltage cables Connection technology according to CAT IV/600 V

Cable Sheath Testing and Fault Location SystemShirla the fault location system is used for cable and cable sheath testing as well as for pre-location and pinpointing of cable faults. The pre-location based on the measuring bridge principle according to Murray and Glaser that is designed especially for power cables, also enables pre-location for control and lighting cables. Null balance and evaluation take place automatically.Key features Cable and cable sheath testing up to 10kV DC Resistance measurement Cable and cable sheath fault pre-location with precision measuring bridge Adjustable cable sections that can be defined with length, conductor cross-section and

material respectively and can be considered in the distance calculation




LV, MV & HV Underground Cable Fault LocationBurn Down Transformer for LV & MV NetworkThe high performance ATG 6000 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 5.75 kVA stray field transformer delivers a maximum voltage of 15 kV and is housed in a fully enclosed 19” housing. Proven methodes for cable faults that are difficult to locate Useful for cables that are difficult to access Robust construction for reliable functions Independent current and voltage control on each burning level

Cable Fault Pin-PointingThe BAUR protrac® pin-pointing system is used for the precise pin-pointing of cable and cable sheath faults. Combining acoustic and electromagnetic fault pin-pointing with sheath fault location in one system, it is ideal for universal application. Unique operating convenience thanks to wireless Bluetooth® connections Precise 3D user guidance to the fault Excellent acoustic quality and range Saves time thanks to use of cable route data and the pre-located fault position from the BAUR

Fault Location App

Surge Voltage GeneratorSurge voltage generators are used for pre-location and pinpointing of high- and low-resistive as well as intermittent faults in power cables. The energy stored in a high-voltage capacitor is released at regular intervals or as DC voltage. The thus generated acoustic signal at the fault position can be recorded with a ground microphone and a universal receiver. High surge voltage up to 32 kV Continuously adjustable voltage Voltage monitoring through kV meters with 3 measuring ranges high surge energy in each voltage range

Portable Cable Fault LocatorThe Portable BAUR Syscompact Series cable fault location system is used for cable fault location and cable testing in low- and medium-voltage cables up to 65 km length.Key Features Fully integrated proven cable fault pre-location methods Surge mode for acoustic pin-pointing Easily transportable Ideal for locations that are difficult to access Integrated proven cable fault pre-location methods

Standalone Cable Fault LocatorThe Syscompact 4000, fully enclosed fault location system for pre-location and pinpointing of high-resistive, low-resistive and intermittent faults on low- and medium-voltage cables. Easy operation and the use of latest fault location methods enable fast and safe fault location. Location of low-resistive, high-resistive and intermittent cable faults Efficient cable fault pre-location methods Pinpointing according to the noise location method or acoustic propagation time measurement (with

Universal Locator and ground microphone) Sheath fault location according to the step voltage method (with Universal Locator and two

measurement probes) Easy to handle




Portable Online Partial Discharge Spot Tester for LV, MV & HV cablesliona is a portable online PD spot tester for measuring and locating partial discharges in cables and switchgear during normal mains operation. liona lets you test cable systems and electrical equipment online without switching off partial discharge activities, and then generate trend analyses. Even a PD spot test (duration: 5-10 minutes) is capable of reliably assessing the current status of your system. Automatic PD detection during normal mains operation (without switching off the cable

route) With DeCIFer® technology: PD identification based on 500 million measurement results Precise online PD mapping with PD transponder

LV, MV & HV Underground Cable Testing & Diagnostics

Portable DC Hi-Pot for LV & MV CablesThe portable, one-piece PGK 25/ 50 /80 high-voltage test device for generating negative DC voltage up to 80 kV is primarily used for onsite testing of paper-insulated mass-impregnated cables in the medium-voltage network. The high voltage is generated through a high-voltage transformer with secondary voltage-multiplier. The internal operating frequency of 20 kHz enables the smallest of device dimensions. Continuous adjustable output voltage The voltage measurement is done directly at the high voltage output Timer of 1-30 min Sensitive current measurement for recording the smallest of insulation currents with

6-time range switch, decadal

Portable AC/DC Hi-Pot Testing for LV, MV & HV CablesThere are hardly any other longer-lasting, more robust and cost-effective testing devices than the two-piece high-voltage test devices from the PGK HB series. They generate continuous adjustable test voltages with mains frequency or optionally DC with positive or negative polarity. The display instruments for current and voltage, the safety control unit and the regulating transformer for the voltage are integrated in the operating unit. Testing of medium- and high-voltage cables DC voltage testing of up to 260 kV output voltage with positive or negative polarity AC voltage testing - up to 190 kV for switchgear, busbar and insulating elements Easy-to-maintain2-piece design

VLF truesinus® for LV & MV NetworkThe portable and powerful viola high-voltage frida & viola testing and diagnostics device is used for cable and cable sheath testing of medium-voltage cables up to 20kV & 35 kV resp. and electrical equipment. Another function is insulation testing on electrical equipment. High performance and compact Precise and non-destructive determination of the cable condition Easy and quick test setup Automatic testing and diagnostic sequences

VLF truesinus® for HV NetworkThe BAUR PHG 70/80 portable VLF test systems are used for cable and cable sheath testing of medium-voltage cables of up to 50 kV and electrical equipment. 3 voltage shapes in one device: VLF truesinus®, VLF square wave and DC voltage For medium-voltage cables of up to 50 kV operating voltage Cable testing, fault conditioning, cable sheath testing



UndergroundCableFaultDetection&DiagnosticsSystemLV, MV & HV Underground Cable Testing & Diagnostics

VLF truesinus® with Tan Delta for LV & MV CablesThe portable and high performance high-voltage testing and diagnostics device is available in two different configurations:Frida & viola: Used for cable and cable sheath testing of electrical equipment and medium-voltage cables up to 20kV & 35 kV. Another function is insulation testing on electrical equipment.Frida TD & viola TD: Expands the functional scope of viola with the tan delta diagnostics and MonitoredWithstand Test (MWT) that combines the cable testing and dissipation factor measurement. This allowsfor an accurate and comprehensive assessment of the cable condition. Cable testing and dissipation factor diagnostics in one device High performance and compact Easy and quick test setup Automatic testing and diagnostic sequences

VLF truesinus® with Tan Delta for HV cablesThe combination of the PHG 80 programmable test generator with the BAUR dissipation factor measurement system produces the cable testing and diagnostics system PHG TD. It is operated via PC control. Dissipation factor measurement and diagnostic testing sequences can be programmed in the menu, after which the dissipation factor measured values are automatically determined in various voltage steps and a final evaluation is conducted. Biggest dynamic range of tan delta measured values from 1 to 10-4 with a cable capacitance >10 nF to

20 uF High resolution +/- 1x10-5 applicable even in new PE/XLPE cables Insensitive against interferences due to complete mains separation Lowest time required for assessing a medium-voltage cable (3-phase approx. 1 hour)

Portable Monitored Withstand Testing (MWT) with VLF truesinus®, Tan Delta & Partial Discharge for LV, MV & HV cablesThe PD-TaD 62/ 80 Portable PD diagnostics system is used in combination with a BAUR VLF generator for carrying out: Partial discharge testing and location VLF cable testing with parallel partial discharge testing Dissipation factor measurementWith the partial discharge testing and the dissipation factor measurement, two effective and proven methods for evaluating the ageing condition of medium-voltage cables and cable accessories havebeen combined in a single compact and portable device. The result is a one-step 360° cable analysis with: early detection and localization of weak points through a PD measurement, in addition to the evaluation of dielectric ageing based on the dissipation factor values.Light, robust and portable: PD-TaD is ideal for installation in the cable test vans and, in combinationwith PHG portable, is also suitable for mobile use in the field. Comprehensive 360° cable analysis – with partial discharge and dissipation factor measurement The lightest and most compact PD measuring device up to 80 kVpeak: Saves space and weight in

the cable test van High-quality measurement technology combined with ease of use

VLF truesinus® with Tan Delta & Partial Discharge for LV, MV & HV cablesWith the PHG TD/PD, you get a multifunctional cable testing and diagnostics system that was specially designed and developed for medium-voltage networks. The PHG TD/PD system is also the only cable testing and diagnostics system that gives a comprehensive overview of the quality and ageing condition of the test sample. The diagnostic methods TD and PD are mutually complementary, because on one hand you can detect the complete condition and on the other hand locate individual faults in the operating resources. High performance VLF truesinus® testing device (3 kW) with regulated output voltage Compact, enclosed design in 19” format Variable installation option with separate control and voltage unit Variable connection options to cable stations of different models




LV, MV & HV Underground Cable Fault & Diagnostics Van

Low energy consumption on site – small footprint for test equipment

Only two engineers are needed to execute the full test Cable system shut-down time will be minimized to 6 to 7

hours Voltage withstand test automatically monitored by partial

discharges Results of non-destructive and sensitive PD measurement and

tan δ are available on the same day This approved testing methodology is in accordance with

relevant international standards and recommendations (IEEE, IEC, CIGRE)

TITRON – Cable Fault & Diagnostics VanThe BAUR Titron is a new automatic cable test van designed for cable fault location and cable testing. The new generation of the high-performance cable test van is based on state-of-the-art technology and provides efficient, safe and reliable cable fault location and cable testing.Key features New intuitive operational concept Central, automatic system control Top reliability and quality standard Flexible in terms of technology and equipment

Cable Partial Discharge with Damped Alternating Current MethodOn-site testing and diagnosis up to 400kV of transmission (E)HV power cables with DAC technology.

After-laying testing and diagnosis of newly installed, repaired or service-aged (E)HV cable systems with reliable results and an appropriate assessment of the condition of the cable insulation as well as of the accessories is the key to successful operation of the transmission networks.

DAC HV technology for all types of transmission (E)HV cables with lengths of up to > 100 km!

Cable diagnosis by partial discharges and dissipation factor (tan δ): DAC voltage test and diagnostic measurements (PD and tan δ) provide for reliable detection of poor installation, failures due to inappropriate laying, failures in accessories or deterioration in cable insulation due to aging. It allows much more than a simple “go or no-go” decision. DAC testing is an advanced maintenance tool which supports asset management and grid operation as well.



TransmissionLine&Tower SecurityMonitoring

CPC 100 + CP CU1Universal test system expanded for impedance, k-factor and mutual coupling

CPC 100 + CP CU1 + HGT1Universal test system expanded for ground impedance, and step and touch voltage measurement

Transmission Line Conductor Monitor Get a complete, continuouspicture of conductor behavior in real-time including actual conductor clearance-to-ground (not sag), conductor temperature, line current, and vibration with the Lindsey TLM Conductor Monitor.

Post Insulator Sensors Current and voltage sensing post insulators have been the standard for smart grid applications. 0.5% voltage accuracy, with flat harmonic response, and no phase shift. 1% current accuracy with no phase shift. Voltage and current accuracy is independent of weather and conductor diameter. Safe, low voltage, very low current outputs. Hydrophobic cycloaliphatic epoxy construction provides superior performance in high pollution and

wet environments. 30% increase in leakage distance. Physical construction that meets all the electrical and mechanical requirements of post insulators

providing endless installation options.

Transmission Capacity ForecastingThe SMARTLINE-TCF platform develops highly accurate forecasts of transmission line power carrying capacity. Forecasts can be provided in one-hour to one-week increments with 98% or better confidence. SMARTLINE-TCF is ideal for engineering, operations, and planning functions, as well as for integration with EMS systems in both day-ahead and real-time markets.SMARTLINE-TCF eliminates the dispatch and operational limitations associated with fixed capacitytransmission asset and replaces them with a living set of transmission pathways whose capacitiesreflect real-time conditions. SMARTLINE is key to a true “smart” transmission grid.

Emergency Restoration Tower Design and Testing Compliant to IEEE Std. 1070 and IEC-60652 Dimensionally Compliant to IEEE Std. 1070 High Relative buckling strength All extruded or plate aluminum construction All system components, including columns, weigh <100kgs Manual, crane or helicopter installation Accepts all commercially available fall arrest systems Flat climbing surfaces Column sections pack into 20’ containers Other system components pack into 20’ containers

Transmission Tower Security MonitorTower tampering – cutting of steel, removing bolts, etc. – is a common threat posed by individuals of various motivations. Weakened towers can collapse at lower wind loads that originally designed for, or expected. The Lindsey TLSM™ Tower Security Monitor combines vibration and infra-red sensors to provide early warning of intrusion around the base of transmission towers; intrusion that may have compromised tower integrity. The TLSM Tower Security Monitor is also ideal for surveilling critical dead-end towers.A member of the TLM-family of transmission line monitors, the TLM Security monitor is self-powered and can communicates via satellite radio, making it ideal for even the most remote tower locations.



LowVoltageTesting&MeasurementInstruments

LV/MV Test & Measurement InstrumentsMagnetic Field HiTESTER•Complies with ICNIRP 2010 guidelines as well as other relevant standards for evaluation testing.• Complies with IEC 62110/IEEE 644 as well as IEC 62233.•Bundled with 3 cm2 Sensor used for magnetic field distribution analysis, and 100cm2 Sensor used with the IEC/EN 62233 standard analysis• User-selectable display units (T, A/m, and G)• Simple operation for easy measurement• Bundled with PC application software• Level output for RMS value, or 3-axis waveform output for magnetic fields

Multi Channel Data Logger for Voltage, Temperature, Humidity, Rotation & Digital Input MEMORY HiLOGGER• Capture data with 15 to a maximum of 600 channels• Send data to the PC in real time• Isolated to sustain up to 600 V between modules and earth• USB 2.0, LAN 100BASE-TX, store to 1GB PC Card• Simultaneous fast- and low-speed sampling allows for media storage space efficiency

Multi Channel Analog & Digital Recorder for Voltage, Current, Temperature, Strain, Frequency, Acceleration & Logic data MEMORY HiCORDER• Work efficiently and intuitively using the MR6000’s large touch panel• Capture momentary phenomena by performing isolation measurement at up to 200 MS/s(when using the High Speed Analog Unit U8976)• Enjoy a stress-free user experience thanks to dramatically faster saving of data• Save data in real time while measurement continues.

Digital Phase Rotation Meter with 3-Phase Voltage Measurement Function•Wireless support. Transfers measurements to your smartphone or tablet. (Optional Wireless Adapter Z3210 is necessary)• World’s first non-metallic contact voltage detection and testing• Simply clip onto wire insulation• Phase detection check and line-to-line voltage inspection at the same time• Easy and intuitive phase detection check with backlight and buzzer•Ideal for work certification photos, offering simultaneous display of phase sequence and 3-phase voltage

Non-Metallic Contact Voltage Detector with LED Light• Non-contact detection of AC voltage from 40 V to 600 V with bright LED light• Pen-style, compact detector with pocket clip• Both visual and audible voltage detection indication• Meets safety standards for CAT IV 600 V environments• Prevent dead batteries with battery self-check function and auto power-off function




LV/MV Test & Measurement Instruments

Pencil HiTester• Test lead and main unit in a single body•Overload protection to 600 V at resistance or continuity functions• LED light brightly illuminates test points• CAT IV 300 V, CAT III 600 V

Analog Multimeter• Measures voltage, current and resistance•Drop proof design withstands drop onto a concrete floor from a height of 1 meter• LED check, Battery check support• CAT III 600 V

Digital Multimeter• 60000 count, 5-digit display, high-resolution measurements•±0.025% DC V basic accuracy, wide 20 Hz to 100 kHz AC V frequency characteristics• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)•Includes multiple measurement functions such as DC+ACV, temperature, capacitance, and frequency

•Terminal shutter mechanism (prevents erroneous test lead insertion)• Measure up to 10A with direct input (DT4282 only)•Dual display lets you check voltage and frequency simultaneously• Magnetic strap (optional)• Rear kickstand• Store probes at the back of the tester

• Identify excessively high input with a red screen backlight• Robust design capable of withstanding a drop from a heightof 1 m•USB communications function supports PC measurements (optional)•Broad -15 (5°F) to 55°C (131°F) operating temperature range

AC/DC Clamp Meter (Bluetooth)• Easily get into tight spaces between cables thanks tothin sensor structure• Measure up to 1000 A• Automatic AC/DC function helps boost work efficiency• Measure DC voltages of up to 1700 V (*1)•Simultaneously measure inrush current in RMS and crest values• Expanded -25 °C to 65 °C operating temperature range•Send measured values to a smartphone or tablet using Bluetooth® wireless technology (CM4376)

AC/DC Clamp Meter• Multiple measurement functions• Automatic AC/DC function helps boost work efficiency• Measure DC voltages of up to 1700 V (*1)•Simultaneously measure inrush current in RMS and crest values• Expanded -25 °C to 65 °C operating temperature range•IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50


http://www.in%EF%AC%81nitymspl.com/



WIRED/ WIRELESS CLAMP LOGGER• Measure AC and DC load current and AC leak current• Choose from many current sensors•Place inside a distribution panel, close the cover, and monitor measured values from the outside• Measure power easily—just set the voltage and power factor• Compact, two-channel model fits where other devices don’t•Download measurement data to a tablet or computer with Bluetooth® wireless technology or capture in real time with the LR8410•Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply)• Store 500,000 data points per channel

AC Leakage Clamp Meter•Wireless support. Transfers measurements to your smartphone or tablet. (Optional Wireless Adapter Z3210 is necessary)•Detect minuscule leakage currents with a newly designed sensor. (Core jaw diameter up to φ 40 mm)•Broad measurement range extending from leakage currents to load currents• Solve GFCI and RCD problems quickly•Speed up pass/fail judgments with the built-in comparator function•Output function (waveform/RMS): use with a recorder to record waveforms and fluctuations• External power supply: use an optional AC adapter forcontinuous, long-term measurement

Clamp-On Earth Tester•Earth resistance measurement for multi-grounded systems•Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)• Measure load current up to 60.0 A range• Clamp at the narrowest point•Data transfer to Android™ phones using Bluetooth® wireless technology•Real time data transfer, automatic report generation on Android™ phone

Clamp On AC/DC HiTESTER• Model 3288-20: True RMS•Use the 3288 for high current measurements such as UPS emergency batteries and train motors• Voltage, resistance, and continuity check functions

Clamp On Adaptor•Output large currents of 1,000 A AC continuously (1,500 A for 5 minutes) at a CT ratio of 10:1•Expand the measurement range of normal clamp ammeters•Excellent phase characteristics that can be used to expand power meter measurement ranges





Capacitance Meter•Dual-band 1kHz/1MHz Capacitance Meter for High Speed Testing of Ceramic Capacitors on Production Lines• High-speed analog test time of 0.6 ms (at 1 MHz)•Improved noise resistance and enhanced repeatability in measurement precision even for production lines•1 kHz and 1 MHz measurement frequency supports stable low capacitance testing with taping machines• BIN function, for easy component screening

LCR Meters• DC, 4 Hz to 8 MHz* measurement frequency*Can be customized up to 10 MHz. Please contact your Hioki distributor or subsidiary for more information.• High-speed measurement of 1 ms (fastest time)• High-precision measurement of ±0.05% rdg. (representative value)•Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability•DC bias function: Measure under conditions simulating actual use or in accordance with industry standards•Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines

Impedance Analyzer• 1 MHz to 3 GHz testing source frequency• Fastest test speed of 0.5 msec (Analog measurement time)• 0.07% measured value variability (When measuring a 1 nH coil at 3 GHz)• ±0.65% rdg. basic accuracy• Half-rack size body and palm-sized test head• Comprehensive contact check (via DCR testing, Hi-Z reject or waveform judgment)• Make frequency sweeps, level sweeps and time interval measurements in Analyzer Mode

Resistance Meter• 0.006% basic accuracy, 0.01 μΩ max. resolution, 1A max. testing current• Measure from 0.00 μΩ (testing current 1 A) to 1200 MΩ•Multiplexer Unit Z3003 (option) provides 20-channels of 4-terminal measurements for a complete assessment of multi-point signals (RM3545-02 only)• Low-power resistance measurement with an open voltage not exceeding 20 mV•High-speed, comprehensive productivity support delivers decisions in as little as 2.0 ms from start to finish

LEAK CURRENT HiTESTER• Compliance with Electrical Appliances and Materials Safety Act, JIS/IEC/UL standards• Uninterrupted polarity switching function dramatically reduces cycle time•Support for rated currents up to 20 A gives the instrument more than adequate capability for testing products designed to comply with new standards• Touch panel features simple, interactive operation•Communications functionality and external I/O support allow automatic testing on production lines





Battery HiTester•Hioki benchtop battery testers support simultaneous high-speed measurement of internalresistance and battery voltage for the ever-expanding production lines of increasingly largerlithium-ion low resistance batteries, and other battery packs for high voltage applications.• 3 mΩ to 3000 Ω/300V DC Battery Testers for Production Line Testing of High Voltage BatteryPacks and Modules• Measure high-voltage battery packs up to 300V• Production line testing of high-voltage battery packs and battery modules• Large (low-resistance) cell testing• Choice of PC interfaces for full remote operation

Battery Tester (Built-in Bluetooth® wireless technology)• Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554•Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage• Noise reduction technology improves noise resistance• Analyze battery health in real time using Bluetooth® wireless technology• New protector delivers better ergonomic hold and durability in the field.

Battery Impedance Meter• Low-frequency AC-IR measurement* : Measure the reaction resistance of a battery*The BT4560 ensures battery cell quality by measuring internal impedance at a low frequency of 1 Hz or below• Extremely reliable measurements for low-impedance batteries*The BT4560 uses a testing current of 1.5 A at the 3mΩ range, which improves the S/N ratio•Circuit configuration highly tolerant of contact and wire resistance to provide stable measurements• Voltage measurement function equivalent to 6-digit DMM (± 0.0035% rdg.)

Battery Management SystemBuilding an environment for validating BMS functionality has never been easier.•12-channel battery cell voltage generator that delivers power supply, electronic load, and DMM functionality in a single package.Safer than using actual batteries and separate power supplies.• Simulate cell behavior in individual channels, with 12 channels per SS7081-50 unit• Build a large-scale module environment with a series voltage of 1000 V (5 V/channel ×200 channels = 1000 V)• Simulate cell anomalies that would pose the risk of fire if using actual batteries• Simulate open-wire malfunctions between channels and the BMS• Simulate cell shortsHigh-accuracy, high-precision output and testing.• Simulate cell behavior using high-accuracy voltage output• Take advantage of cell balancing from -1 A to 1 A with two-quadrant output voltages• High-accuracy, high-precision voltage and current measurement•Measure minuscule currents using the 100 μA range (for BMS dark current and cell balancing circuit leakage current)Simplify evaluation with the bundled PC application.• Control up to ten SS7081-50 units• Automate testing by creating sequences of the simulated states you wish to reproduce



PowerMeterTesting&MeasurementInstruments

Power Meter, Power Logger & Power Quality Analyser

Single Phase AC/DC Power Meter•Compatible with the SPECpower® benchmark for server power consumption SPECpower® is a registered trademark of Standard Performance Evaluation Corporation• High-precision ±0.1% basic accuracy• Wide 1mA to 20A measurement range, max. continuous input of 30 A• Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC• Measure harmonic and standby power consumption according to IEC62301•Achieve superior accuracy even with a low power factor for no-load testing of transformers and motors• Synchronized control using up to 8 instruments•Built-in external sensor input terminals to measure up to 5000 A AC (PW3335-03, PW3335-04 only)• Send measured values to HIOKI data loggers using a Bluetooth® wireless technologycompatible adapter

Three Phase AC/DC Power Meter•Compatible with the SPECpower® benchmark for server power consumption SPECpower® is a registered trademark of Standard Performance Evaluation Corporation• Measure DC, and single-phase 2-wire to 3-phase 4-wire with 3-channel input•For development and production of motors, inverters, power conditioners, power supplies, and other devices• High-precision basic accuracy of ±0.1 %• Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC• High-current measurement up to 65 A of direct input• Harmonic measurement up to the 50th order according to IEC 61000-4-7• High-accuracy measurement, even with a low power factor for no-load testing oftransformers and motors• Built-in external sensor input terminals to measure up to 5000 A AC• Synchronize up to 8 units for multi-unit measurement•Create a 6-channel power meter by synchronizing two PW3337 units and using the free PC application

CLAMP ON POWER LOGGER• Measure voltage from the top of the cable with zero risk of short circuit• Supports single to three-phase, 4-wire circuits• Measure between 90V to 520V• Display harmonics up to the 13th order• Slim, compact design that can be placed anywhere• Store months of data on SD cards• QUICK SET function guides you in making the right connections

Power Quality Analyser• Verify power problems in accordance with the IEC61000-4-30 Class A standard• High accuracy and continuous gapless recording(V: ±0.1% of nominal voltage, A: ±0.1% rdg. ±0.1% f.s., W: ±0.2% rdg. ±0.1% f.s.)•Broadband voltage range lets you measure even high-order harmonic components of up to 80 kHz• Maximum 6000 V peak transient voltage up to 700 kHz• Measure up to 6000 A AC• Two systems of power measurement and efficiency calculation for ch 1, ch 2, ch 3 and ch 4•Make simple measurements of inverters with 40 to 70 Hz fundamental frequency and max. 20 kHz carrier frequency• Easily create reports with bundled PQ ONE application software• Optional GPS BOX for synchronizing multiple devices



Important Note



INFINITY Measurement Solutions Pvt LtdRegistered Address:13,Crystal Avenue& IndustrialPark, Near Odhva Ring Circle,Odhav, Ahmedabad. 382415 Gujarat.INDIA.Phone:+9197277 12563 Email: [email protected] Website: www.infinitymspl.com

INFINITY Calibration Testing Services Pvt LtdOne Source for Calibration Services

13,Crystal Avenue& Industrial Park, Near Odhva Ring Circle, Odhav, Ahmedabad. 382415Gujarat. INDIA.M: +919727750516, E: [email protected], W: www.ictspl.com

NABL Calibration ServiceMechanical, Pressure, Temperature,Flow, Electrical, Force, Analytical, Validation, Thermalmapping, AMC Calibration contract & On-Site calibration

GROUP COMPANY

INFINITY Group

Documents

INFINITY · 2021. 6. 20. · Established in April 2014 name under “INFINITY Enterprise”. After six years of ups & downs in business we decided to expand our thought Process, Team,Business