A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Metal Fabrication Facilityincluding CNC Turret Punch Presses, CNC Press Brakes,

Stamping Presses, Coil Equipment, Spot & Seam Welders, and Expanders

Online Bidding Opens: Thursday, June 18th

Online Bidding Closes: Thursday, June 25th

Paris, Kentucky

ONLINE AUCTION

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)2

ONLINE AUCTIONHilcoTM Industrial

ONLINE BIDDING OPENS

THURSDAY, JUNE 18TH

BEGINNING AT 10AM LOCAL TIME

ONLINE BIDDING CLOSES

THURSDAY, JUNE 25TH

CHeCk www.HIlCoInd.Com For ClosInG tImes

PREVIEwMONDAY, JUNE 22ND

BY APPOINTMENT ONLY

9AM TO 4PM LOCAL TIME to sCHedUle An eArlIer InspeCtIon, pleAse ContACt ed CervAC At 847-849-2935 or emAIl eCervAC@HIlCoGloBAl.Com

ASSET LOCATION149 CLEVELAND DRIVE PARIS, KY 40361

FURTHER INFORMATION• A 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT

IS MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANKLETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE.AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENTIS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), ORWHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AUCTION WILLBE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE WILL BE POSTED TO OUR WEBSITE WITH HOURS OF REMOVALBETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITEAFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.

MACHINERY &  EQUIPMENT

ED CERVAC 847-849-2935 • ECERVAC@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

CNC TURRET PUNCH PRESSES

For more information, please visit us on the web at www.hilcoind.com/vermontcastings 3

CNC PUNCH PRESSES • CNC PRESS BRAKES

Register and Bid Online Only at

www.hilcoind.com

CNC TURRET PUNCH PRESSES2 – AMADA MODEL VIPROS 358 KING

30-TON CNC TURRET PUNCHES, S/Ns 35820102, 35820324 (1995/1997),58-Station Turret, Thick Turret, with (4)Auto Index Stations, Tool Balancer andAmadan-04PC Controls

1 – AMADA MODEL PEGA 357 30-TONCNC TURRET PUNCH, S/NP3571257QH (1989), 58-Station Turret,Thick Turret, with (2) Auto Index Stationsand Amadan-04PC Controls

2 – AMADA MODEL PEGA 345 30-TONCNC TURRET PUNCHES, S/NsAQ450273, AQ450288 (Both 1996), 58-Station Turret, Thick Turret, with AutoIndex Stations and Amadan-04PCControls

CNC PRESS BRAKES1 – ADIRA MODEL QHA-6320 630-KN HYDRAULIC CNC PRESS BRAKE,

S/N 3757/7304 (1994), 2050mm Max Length, 102mm Stroke, 84 mm/sApproach, with Back Gauge and Hurco Autobend 7 Controls

1 – ACCURPRESS MODEL 71008 100-TON CNC PRESS BRAKE, S/N 2282(1993), 8' Bed, Electric Foot Switch and Accurpress PLC Controls

1 – HURCO MODEL PH65/25 65-TON HYDRAULIC CNC PRESS BRAKE,S/N 5326 (2001), 8' Bed, with Die Clamps, 36" Back Gauge, HurcoAutobend 7 Controls, Shadow Light Curtains and Electric Foot Switch

2 – ACCURPRESS MODEL 7606 60-TON HYDRAULIC CNC PRESSBRAKES, S/Ns 4264, 4263 (Both 1997), 6' Bed, with Back Gauge,Accurpress CNC Controls and ETS Programmable Controls, Electric FootSwitch

1 – ACCURPRESS MODEL 7608 60-TON HYDRAULIC CNC PRESSBRAKE, S/N 2580 (1994), 8' Bed, with Back Gauge, Accurpress CNCControls, Please Note: Out of Service

STAMPING • COIL EQUIPMENT

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)4

STAMPING1 – SHIEH YIH MODEL SNC-110 110-TON

MECHANICAL PRESS, S/N EN1106 (1986),45" x 27" Bed, 25-1/2" x 20-1/2" Ram, 180mmStroke, 90mm Ram Adjustment, 350mm DieHeight, 50-SPM, with Jobber Plus PLC PressControls, Light Curtains and Dual Palm ButtonOperation

1 – VERSON MODEL 7-1/2 105-TON OBI PRESS,S/N 6123, 39" x 30" Bed, 8" Stroke, 4" SlideAdjustment, 18" Shut Height, with StrokeSelector Inch and Single, Dual Palm ButtonOperation

1 – NIAGARA MODEL E4-1/2 75-TON OBI PRESS,S/N 34677, 36" x 24" Bed, 8" Stroke, 3-1/2" SlideAdjustment, 16" Shut Height, 40-SPM, withCushion, Jobber Plus PLC Press Controls, LightCurtains and Dual Palm Button Operation

1 – HEIM MODEL S2-40 40-TON STRAIGHT SIDEPRESS, S/N H-3668, 22" x 56" Wide Bed, 2" Stroke, 3" Slide Adjustment, 105-SPM and 12" Wide Windows

COIL EQUIPMENT2 – MECON MODEL 200MDC48 20,000-LB. COIL

REELS, S/Ns 2459N47, 2459N46, with KeeperArms

1 – AMERICAN 2,500-LB. COIL REEL, S/N 2685,20" Wide with Keeper Arms

1 – 2,500-LB. COIL REEL, 20" Wide with KeeperArms

1 – PA INDUSTRIES MODEL SRF-M18 18" WIDESERVO ROLL FEEDER AND STRAIGHTENER,S/N 23750502, 7-Roll Straightener, 2-Roll ServoFeeder, with Magnum PLC Controls

1 – NIAGARA MODEL 200-7-42 42" WIDE COILSTRAIGHTENER, S/N F-1997, 53" x 42"Capacity, 12-Rolls, with Niagara Mod-U-LoopControls

2 – PRE MODEL PI20F12-LS 12" WIDE SERVOROLL FEEDS, S/Ns 0106-005, 0106-004, .105"Thickness, 99.99 Max Length, with Press RoomPLC Controls

SHEET METAL • METAL FABRICATION

For more information, please visit us on the web at www.hilcoind.com/vermontcastings 5

SHEET METAL1 – ROPER MODEL PEXTO 617 18-GA. PIPE BEADING

MACHINE, S/N 1057-9-03, 2-Roll Design, with 3" & 3-1/2"Dia. Rolls and Electric Foot Switch

1 – SAMPSON MODEL 1KMP12 PIPE BEADING MACHINE,S/N 314 (1999), with 2-1/2" Dia. Die Rolls

1 – PEXTO MODEL 520-C ACME STYLE LOCK SEAMER, S/N7-65, 20-Ga. Capacity and 54" Wide Travel

5 – HYDRAULIC PIPE EXPANDERS, Die Sizes: 7.5" – 10" –10.5" – 13", All Expanders Tie into Single Hydraulic PowerUnit, with (3) 5-HP Motors

4 – HYDRAULIC PIPE EXPANDERS, Die Sizes: 4" Male – 4"Female – 7" Male – 7" Female, All Expanders Tie into SingleHydraulic Power Unit, with 10-HP Motor

1 – 50" WIDE PIPE ACME STYLE CRIMPING PRESS, with 4" Dia. Ram, 480-Volt

1 – PIPE CRIMPER, with 2-5/8" Dia. Die Rolls and Electric FootSwitch

2 – PIPE BEADING MACHINES, with 5"/2” Dia. Rolls andElectric Foot Switch

1 – LIP ROLLER BEADING MACHINE, 2-Roll Design with2-3/8" Dia. Die Rolls and Electric Foot Switch

1 – LIP ROLL MACHINE, with (28) Top & Bottom Rolls, 2-1/4"Approx. Dia. Rolls

METAL FABRICATION1 – PINES MODEL M-54536 7/8" APPROX. CNC TUBE BENDER,

S/N 10710-03011, with Digital Dial-A-Bend Programmable Controls,Mandrel Extractor and Safety Mats

1 – 36" WIDE PLATE BENDING ROLL, with Wire Grooved Roll and ElectricFoot Switch

1 – 34" WIDE PLATE BENDING ROLL, with Wire Grooves 1 – MILFORD MODEL 305 RIVETER, S/N 2723, with Electric Foot Switch 1 – MILFORD MODEL 305 RIVETER, S/N 539, with 12" Throat and Tooled

for Rivet 539 1 – 5-HEAD ROLL FORMER, 3" Dia. Rolls, 4-1/8" Horizontal Distance

Between Center and Manual Height Adjustment 1 – TALOC MODEL C71-18 CLINCHING MACHINE, S/N 14275013 (2014),

18" Throat, 3/4-HP Motor, with Stand – Load Arm and Electric Foot Switch 1 – TALOC MODEL H412 CLINCHING MACHINE, S/N 3413, with 12" Throat

WELDING • SUPPORT EQUIPMENT • ROLLING STOCK • CNC EDM

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)6

WELDING1 – NATIONAL MODEL ROUECHE 150-KVA RESISTANCE SEAM WELDER, S/N F30858-041406, with

Entron Controls, 440-Volts and Single Phase 1 – 30-KVA SPOT WELDER, 28" Throat, with Water Cooled Tips and Intertron 105 Controls 1 – OTC MODEL DP-400 WELDER, S/N D30010YPZ144481008 (2006), with Wire Feed Attachment

SUPPORT EQUIPMENT1 – WULFTEC MODEL WCRT-200 AUTOMATED ROTARY STRETCH WRAPPER, S/N 9113-1-0803,

with 4' Rotary Arm Capable of 8' Radius, 30" Wide Conveyor and Allen Bradley Panel View 550 PLCControls

1 – WILTON 1-1/2 HP VERTICAL MILLING MACHINE, 9-1/2" x 32" T-Slotted Table, 5" Stroke, 3,000-RPM,with Machine Vise

1 – DELTA MODEL 33-890 12" RADIAL ARM SAW, S/N 05i11227 (1994), with 14" x 30" Sliding Table, 20" Head Travel

5 – HYDRAULIC POWER UNITS, (2) with 30" x 42" x 22" Deep Tanks, 30-HP Pump Motors,(2) with 27" x 60" x 17" Deep Tanks, 20-HP Pump Motor & Heat Exchanger, (1) with 24" x 48" x 16" Deep Tank,25-HP Sterling Motor

14 – AMERICAN MODEL METER DTM-200A ONE TENTH CU.FT. REVOLUTION GAS METERS

SKID STEER LOADER1 – BOBCAT MODEL 453 SKID STEER LOADER, S/N K561811707

CNC EDM1 – MITSUBISHI MODEL DWC-90 CNC ELECTRICAL DISCHARGE MACHINE, S/N 579C1103 (1988),

with Filter System, Sony DRO and Mitsubishi CNC Controls, Please Note: Out of Service

Register and Bid Online Only at

www.hilcoind.com

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Hilco Industrial, LLC • KY License #RP-3533 • IL  License #444.000215

Printed in USA • VER4271 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

FollowUs on:

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial ONLINE AUCTIONTerms of Sale

A 16% buyer's premium will be charged on all assets whenpayment is made by means of cash, cashier’s check, com-pany check (with bank letter of guarantee) or wire transferwithin 48 hours of sale close. an 18% buyer's premium willbe charged on all assets when payment is made by creditcard (accepted for invoices of $2000 or less), or when pay-ment is received after 48 hours of sale close. Everythingwill be sold online to the highest bidder for cash, in accor-dance with the Auctioneer’s customary “Terms of Sale”,copies of which will be posted online. All items will be sold“as is, where-is” without any warranties, expressed orimplied. Although obtained from sources deemed reliable,the Auctioneer makes no warranty or guarantee to theaccuracy of the information herein contained. Bidders areencouraged to thoroughly inspect the items on which theyintend to bid prior to sale. Absolutely no items will beremoved until the day after the conclusion of the sale andpayment is made in full. Subject to additions, deletionsand prior sale. For updated information, please visit ourwebsite at www.hilcoind.com for any date, sale process,terms and conditions and list of available assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made toHilco Industrial, LLC. Payment Options: VISA, MastercardDiscover accepted – if invoice total is $2,000 or less; WireTransfer; Certified Check; or Company Check (with Bank let-ter of guarantee – see sample letter below). All sales are sub-ject to sales tax. Purchasers claiming exemptions from taxesmust provide proof satisfactory to the Auctioneer of their enti-tlement to claim such exemptions. Please see complete termsand conditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at theAuction of Vermont Castings on June 18-25, 2015.

Metal Fabrication Facilityincluding CNC Turret Punch Presses, CNC Press Brakes,

Stamping Presses, Coil Equipment, Spot & Seam Welders, and Expanders

Online Bidding Opens: Thursday, June 18th

Online Bidding Closes: Thursday, June 25th

Paris, Kentucky