OKUMA #LT-200-M "6-Axis" Turning Center Mazak # MTV-414-22 CNC Vertical Machining Center

ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS & PLANT SUPPORT AUCTIONCNC GRINDERS • CNC TURNING & MACHINING

CENTERS • FORKLIFTS • GENERATOR

Edgetek “Super Abrasive 5-Axis” CNC Grinders

Surplus Consigned from Major Aerospace & Other Manufacturers

(Various Locations: See Online Lot Catalog For Locations)

SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

Belmont "Maxicut" EDM Machine

New 2001/1997

MINSTER # 7 Punch Press

New 1998

New 2004

New 2006

1 of 2

1 of 8

Milling 1 of 5

Several Presses Available

100 Amp

Sale under Management of:Thomas Industries, Inc.

2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727

email: gavel@thomasauction.com www.thomasauction.com

ONLINE AUCTION – REGISTER & BID AT WWW.THOMASAUCTION.COM2

INSPECTIONS - CALL TOM DECOSMO, JR. - (413) 530-0019 OR EMAIL tdecosmo@thomasauction.com

SHARP 3 HP TOOL-ROOM MILL

MATSUURA 760V-DC "Twin Spindle" CNC VerticalMachining Center

CNC GRINDERS(2) Edgetek “Super Abrasive

5-Axis” Cnc Grinders (New2001 & 1997)

Schutte # WU-405 “5-Axis”Tool & Cutter Grinder (New1999)

CNC LATHESOkuma #LT-200-M "6-Axis"

(New 2004)Mori-Seiki # SL-25B

(Fanuc Control)YCM-Supermax # TC-2

GENERATORGenerac Power Systems

Guardian Elite 80KWGenerator (New 2007)

Edgetek “Super Abrasive 5-Axis” Cnc Grinders

Mori-Seiki # SL-25B CNC Turning Center

Blanchard #18-36 Rotary Type Vertical GrinderMazak # MTV-414 CNC Vertical Machining Center

Belmont "Maxicut" EDMMachine

Schutte # WU-405 “5-Axis” Tool & Cutter Grinder

1 of 2

New 2001/1997

Built In CoolantSystem

New 1999

New 1999

Fanuc Control

New 1992

New 2006

Fanuc 11M CNCControl

See LotCatalog forLocationsTHIS BROCHURE IS A PARTIAL LISTING.

COMPLETE LOT CATALOG & PHOTOS AT

www.ThomasAuction.com

CNC MACHINING CENTERS Mazak # MTV-414-22 CNC Vertical

Machining Center (New 1998)Mazak # MTV-414 CNC Vertical

Machining Center (New 1992)Okuma # MX-45VAE CNC Vertical

Machining Center (New 1998)Okuma # MX-45 CNC Vertical Machining

Center (New 1998)Okuma # MC-5VA CNC Vertical

Machining CenterMonarch # VMC-150B CNC Vertical

Machining Center (New 1994)Matsuura # 760-DC “Twin Spindle” CNC

Vertical Machining CenterKuraki # KH-50 CNC Horizontal Machining

CenterMori-Seiki #MV-40 CNC VMCMori-Seiki #MV40-45V CNC VMCEXCEL # PMC-5T18 CNC VMC

CNC MILLERS & H.D.MILLERS

Cincinnati “3-Axis” CNC #750-20 Verci-Power,Retrofitted by Boeing, ABControl

Cincinnati # 330-18 Verci-Power Horizontal Bed-TypeMiller w/ Vertical head

Cincinnati # Cinova 80-205-12, Universal HorizontalMiller

VERTICAL TURRET LATHESBullard 46” Dynatrol VTL w/

Sony DRO

GUN DRILLDeHoff “Knee-Type” Gun Drill,

2” x 24” Capacity

LARGE SELECTION Of PLANT SUPPORT, fORKLIfTS & CRANE 3

VARIOUS LOCATIONS: SEE LOT CATALOG FOR LOCATIONS

MILLING MACHINESAcra 5 HP “Knee Type” Vertical Miller W/ Anilam CNC

ControlBridgeport Series 1, 2 HP Vertical Miller W/ DROBridgeport 1 HP Vertical Miller W/ DROAlliant # RT-2 Vertical 2 HP Miller W/ DROVectrax # GS-20V Vertical Miller W/ DRO & PFSharp 3 HP Knee Miller (Base Mounted) (New 1999)MSC 2HP Vertical Miller, 9” x 49” Table, w/ DRO & PFYCI-Supermax # YC-1.5VS, 3-HP Vertical Miller

GRINDERS-VERTICALBlanchard #18-36 Rotary Type Vertical Grinder

PUNCH PRESSES & PRESS EQUIPMENTRavne # UHS-150 S.S.D.C. Press, 150 TonAida # PC-15(2) Power Punch Press, 150 TonFederal 45 Ton Punch Press, 45 TonPerkins #550-B Punch Press, 45 Ton Minster # 7 OBI Punch Press, 75 TonBliss # 28 1/2 OBI Punch Press, 125 TonBliss # 6100 S.S.D.C. Power Press, AC-ABBliss # 23 OBI Punch Press, 75 Ton(3) Bruderer “Precision” Straightener-Leveler FeedsLittell #626 Coil Cradle/StraightenerRowe #B20-04000 Coil Cradle/Straightener

Okuma # MX-45VAE CNC VerticalMachining Center

Kuraki # KBM-11X CNC Horizontal Boring/Milling Machine

Bullard 46” Dynatrol VTL w/ Sony DRO

Vectrax # GS-20V Vertical Miller Acra 5 HP “Knee Type” Vertical Miller

EXCEL # PMC-5T18 CNC Vertical Machining Center

Bridgeport Series 1, 2 HP Vertical MillerW/ DRO

Stainless Steel Tank, 1800 Gallon, 6ft X 10ft

Bruderer Straightner-Leveler Sunnen # MBB-1660 Hone Tennant Floor Scrubber Model # 5680

1 of 2

Fanuc Control

CNC Control

New 1998

1 of 3

DRO

DRO

New 2003

Late Model

Late Model

Power Stroker

Low Hours

New 2005

Low Hours

ONLINE AUCTION ONLY – BID AT WWW.THOMASAUCTION.COM4

SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)

EDMBelmont Technologies “Sinker-

Type” EDM, 100 Amp (New 2006)

ELOX “Sinker-Type” EDM, 100 Amp(New 1986)

LATHESLeblond 26”x 96” “Regal Servo

Shift” Engine LatheLeblond 13”x 30” “Regal” Engine

Lathe W/ Turret Hardinge # DV-59 Secondary

Lathe Mazak “Gap Bed” Engine Lathe,

14”/19” x 40” (New 1978)TOS-Trencin “Gap Bed” Engine

Lathe, 19”/27” x 78” (New 1995)(2) South Bend “Toolroom Type”

13” x 28” Lathes (Late)

FORKLIFTS & CRANEHyster # H-210XL Forklift w/ 20,000

Capacity (New 2000)Hyster # H-250 Forklift w/ 25,000 lb.

CapacityGrove CraneClark Electric Forklift Model #TM

15S w/ Charger Snorkel # SL-20 Scissor Lift(5) Ecoa Hyd. “Pallet Type” Zero

Lift Tables (New 2010 Unused)

THIS BROCHURE IS A PARTIAL LISTING. COMPLETE LOT CATALOG & PHOTOS AT

www.ThomasAuction.com

DISCLAIMER: Auctioneer is notresponsible for descriptive errors cover-ing specifications, impression counts ormodels of assets offered at this auction,additions or deletions. Items offered

may not necessarily be sold asdescribed and/or photographed.

Buyers should verify all aspects of theirpotential purchases during inspectionas all items offered will be sold “as is,

where is” with all faults.

Please check with the auctioneer’soffice for additions or deletions.

Ravne # UHS-150 S.S.D.C. Press, 150 TonClark Electric Forklift Model #TM 15S

Snorkel # SL-20 Scissor Lift

RUSH DRILL GRINDER

Leblond 13”x 30” “Regal” Engine Lathe

ECOA Hyd. Pallet Type Zero Lift Tables WATER COOLED TRANSFORMERStokes Model 212-11 Vacuum Pump

Lepel Induction Heater

1 of 2

1 of 5

1 of 5

New 2010

Charger Included

Several Sizes

HYSTER # H-210XL "All Terrain" FORKLIFT

COMPLETE LOT CATALOG, REGISTRATION & BIDDING AT WWW.THOMASAUCTION.COM

INSPECTION: BY APPOINTMENT ONLY

5

ONLINE AUCTIONONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS & PLANT SUPPORT AUCTIONCNC GRINDERS – CNCMACHINING CENTERS –FORKLIFTS – GENERATORSurplus Consigned from MajorAerospace & other Mfg.(Various Locations: See Lot Catalog for Locations)

SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)

INSPECTION: BY APPOINTMENT ONLYBuyer's Premium: 15%

Registration: Register and bid at www.thomasauction.com

Payment Due In Full: Thursday, August 6, 2015Removal: All items must be removed by Fri., August

21, 2015Staggered Closing Times: Lots Have 60-Second

Staggered Closing Times.Auto Extend Bidding: If a bid is submitted with less

than 3-minutes remaining, the closing time for thatlot will be extended by 3-minutes.

Payment Types: Certified Check or Wire TransferDisclaimer: Auctioneer is not responsible for errors,

omissions, additions or deletions. Items offered maynot necessarily be sold as described and/or pho-tographed. Buyers should verify all aspects of theirpotential purchases during inspection as all itemsoffered will be sold “as is, where is” with all faults.Please check with the auctioneer’s office for addi-tions or deletions.

THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxwww.thomasauction.com

Under Management of:

ALSO OFFERINGSeiko # SECPER 12 Tapping

MachineBewo Power “Cold Type” Chop

Saw W/ ViseMoore Jig Borer #2 W/ Sony DroMoore #1 Jig BoreB&S # 618 “Micro-master” Hyd.

Surface GrinderNorton 6”X18” Surface Grinder SMW # 65-FS “Omni-Bar” Bar Feed

UnitRhino-Bar Bar Feed UnitLNS “Hydro-Bar” Bar Feed, Model

6.32-HS-5.2

Ikura-Seiki Bartop LUB12-II Mag.Bar Feed for Citizen B-12 SwissTurn (New 2004)

Tennant Floor Scrubber Model #5680

Sunnen # MBB-1660 Hone w/Power Stroking

Ruemelin 60” Hood Type BlastCabinet

Ingersoll-Rand 100-HP RotaryScrew Air Comp (New 1995)

Doall Horizontal Band Saw,(Approx. 12” x 12” capacity)

Marvel # 13A Horizontal Band Saw,13” x 13” Cap (New 1981)

(5) ECOA Hyd. Pallet Type Zero LiftTables (New 2010)

Interlake Power Box StitcherStainless Steel Tank, 1800 Gallon,

6ft X 10ftGanro “Trunnion” Type CNC

Rotary TableHelmel #Checkmaster Coordinate

Measuring Machine # 338-251Stokes Model 212-11 Vacuum

Pump With Intensifying Unit(2) Lepel Induction HeatersCustom SS Ultrasonic Filtration UnitAllen 4-Spindle Super-Speed Drill

Press, 3/8” Cap

TECHNICAL INFORMATION & INSPECTIONSTom DeCosmo, Jr. (413) 530-0019

PAYMENT INFORMATIONIrina Lekhmus (203) 458-0709 X108

New 2000

Grove # IND-68 "Carry Deck" Industrial Crane HYSTER # H-250 FORKLIFT

AUCTION ITEM LOCATION INFORMATION AT WWW.THOMASAUCTION.COM

Diesel Powered

25,000 lb. Capacity

20,000 lb. Capacity

Diesel Powered

Propane Powered

12 Ton Capacity

FORWARDING SERVICE REQUESTED

PRESORTED FIRSTCLASS MAILU.S. POSTAGE

PAIDPermit No. 80Milford, CT

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

ONLINE AUCTIONSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)

AUCTION DATE: TUESDAY, AUGUST 4TH 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

CNC GRINDERS • CNC MACHINING CENTERS • FORKLIFTS • GENERATOR Surplus Consigned from

Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)

SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY

ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS & PLANT SUPPORT AUCTION

YCM Supermax # TC-2 CNC LatheBlanchard #18-36 Rotary Type

Vertical GrinderTsugami # BO-205-II CNC Swiss Type

w/Magazine Bar Feed

New 1990

FANUC OM CNC

New 2012