Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
14 800.854.2235 carvin.com
The LS1002 is a multipurpose, 2-way loudspeaker system to be used as a main, fill, or monitor system in any type of sound reinforcement applica-tion.The LS1002 features 10” driver for low and mid frequency reproduc-tion and a titanium high frequency driver that extends the frequency response to 20 kHz.
LS1002 TechnicaL SpecSFrequency Resp: +/-3dB 85Hz - 20kHz (72Hz - 10dB)Power Capacity: 200 W continuous, 400 W peakSensitivity: 98 dB SPL, 1W / 1M (124 dB MAX)Nominal directivity: 60 degrees HxVNominal Impedance: 8 OhmsDimensions: 12.5”W x 11.5”D x 18”HWeight: 21 lbs.
LS1002 10” 300w 2-way $19999
$16999 List $295
The LS1502 is a multipurpose, 2-way main / wedge monitor system. The LS1502 is equally at home as a mains loudspeaker system where maximum cover-age with minimal enclosures is needed. The LS1502 features a high efficiency 15” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion.
See LS1502A power specs aboveFrequency Resp: +/-3dB 53Hz - 18kHz (47Hz - 10dB)Power Capacity: 400 W continuous, 800 W peak Sensitivity: 100 dB SPL, 1W / 1M (129 dB MAX)Nominal Directivity: 90 degrees HxVNominal Impedance: 8 OhmsDimensions: 18.25”W x 14”D x 27.25”HWeight: 44 lbs
The LS1202 is a multipurpose,2-way loudspeaker system to be used as a main, fill, or monitor system. The enclosure features a high efficiency 12” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion.
Frequency Resp: +/-3dB 76Hz - 20kHz (70Hz - 10dB) Power Capacity: 300 W continuous, 600 W peak Sensitivity: 97 dB SPL, 1 Watt @ 1 meterNominal Directivity: 90 degrees HxVNominal Impedance: 8 OhmsDimensions: 15.25”W x 13”D x 24.25”HWeight: 33 lbs.
LS1202 TechnicaL SpecS
LS SERIESHIGH PERFORMANCE Loudspeakers
LS1502
LS1503LS1202
LS1802
LS1002
LS2153LS1801
LS1523
Designed for musicians and mobile DJs, Carvin’s LS Series loudspeak-ers are designed for today’s concert needs. Consisting of eight models, the LS Series reaches sonic heights with high performance componants together with multi-ply plywood enclosures & crossover designs.
APS SPECS: FREQ. RESPONSE: 20 to 20kHz, THD less than .05% @ 90%, .1% at full power, SLEW RATE: 50V/µs, ACTIVE EQ: ± 6 dB @ 100 Hz, 100 Hz to 5 kHz mid sweep, 10kHz, EQ bypass switch, (SUB WOOFER: 24dB/Octave @ 80 & 120 Hz) • Relay muting and Speaker Guard™ protection, Peak and protection & power on indicators, On-Off power switch, Power Req. 120VAC 60 Hz . 240 AC/50Hz model available
Carvin’s optional LS Active Powered Systems take the guesswork out of selecting the ideal power source to drive your loudspeakers. With bi-amped and tri-amped models designed to handle the most demanding applications, APS amplifiers are perfectly mated with four Carvin loud-speakers—the LS1502A, LS1503A, and LS1523A—creating studio quality powered systems. There’s even one APS power pack created specifi-cally to generate the bone shaking impact of our LS1801A subwoofer. APS systems make setup and operation easier with less gear to haul. Connect your mixer directly to these systems and you’re ready to rock!
LS1202 12” 300w 2-way $29999
$22999 List $395
LS1502 15” 2-way paSSive $32999
$24999
List $495
LS1502a 15” 350w Bi-amped $46999
$39999
List $795
Main/Monitor Package1002-2 • 2LS1002 • 2 PRO50S $33999 save $50
1002-4 • 4 LS1002 • 2 PRO50S, PRO25S $65999 save $108
Main/Monitor Package1202-2 • 2 LS1202 • 2 PRO50S $45999 save $50
1202-4 •4 LS1202 • 2 PRO50S, PRO25S $89999 save $108
Passive Monitor Package1502-2 • 2 LS1502 • 2 PRO50S $49999 save $50
1502-4 • 4 LS1502 • 2 PRO50S, PRO25S $94999 save $130
“Active” Monitor Package1502A-2 • 2 LS1502A • 2 PRO50XLR, AD70 $74999 save $132
1502A-4 • 4 LS1502A • 2 PRO25XLR, PRO50XLR, AD70 $149999 save $190
LS1502A 2-wAy Bi-AmPED 350w RmS (Hi Freq: 50w @ 16 Ω, Lo Freq.300w @ 8Ω
LS1503A 3-wAy TRi-AmPED 425w RmS (Hi Freq: 50w @ 16Ω, mid Freq: 75w @ 16 Ω, Lo Freq. 300w @ 8 Ω)
LS1523A 3-wAy TRi-AmPED 900w RmS (Hi Freq: 80w @ 16 Ω, mid Freq: 120w @ 8Ω, Lo Freq. 700w @ 4 Ω)
LS1801A SuB wOOFER 700w RmS @ 4 Ω
Only 33 Lbs.
Only 44 Lbs.
APS ACTiVE CONTROLS• 3-band EQ, parametric mid sweep• EQ in/out switch • XLR through
3 Year Limited Warranty
MADE IN
USAMADE IN
USA
$5/mo. $7/mo.
$10/mo.
$20/mo.$14/mo.
$27/mo.
$14/mo.
$27/mo.
$14/mo.$29/mo.
$22/mo.$45/mo.
Only 21 Lbs.
15800.854.2235 carvin.com
The LS1802 is a very high output, dedicated subwoofer system used for low frequency reproduction wherever additional LF coverage is needed. The LS1802 is well suited to supplement main sound reinforcement systems, drum or side fills, or installed in live music venues, clubs, or houses of worship. The LS1802 features dual high efficiency, high capacity 18” low frequency drivers with 4” voice coils for maximum low frequency extension.
Frequency Resp: +/-3dB 30Hz - 150Hz (24Hz - 10dB)Power Capacity: 1600 W continuous, 3200 W peak Sensitivity: 102 dB SPL, 1W / 1M (137 dB MAX)Nominal Impedance: 4 OhmsDimensions: 40”W x 22.75”D x 23.5”HWeight: 122 lbs
LS1802 TechnicaL SpecS
The LS1801 is a compact, high output, dedicated subwoofer. A 1 3/8” pole mount is included for using the LS1801 with a pole to elevate other LS series mains systems. The LS1801 features a high efficiency, high capacity 18” low frequency driver with 4” voice coil for maxi-mum low frequency extension and continuous high powered applications.
See LS1801A powered speaker specs on pg 12Frequency Resp: +/-3dB 35Hz - 150Hz (29Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 98 dB SPL, 1W / 1M (130 dB MAX)Nominal Impedance: 4 OhmsDimensions: 19.75”W x 22.75”D x 23.5”HWeight: 69 lbs
LS1801 TechnicaL SpecS
The LS2153 is a compact, quasi 3-way professional loudspeaker system. The LS2153 is designed as a quasi 3-way system featuring dual high efficiency 15” drivers. The bottom 15” is dedic-tated to low frequency, while the other 15” for low / mid frequencies. The LS2153’s high frequency reproduction comes from a Titanium high frequency driver. A great system for high-pow-ered applications where portability and lightweight is important.
Frequency Resp: +/-3dB 51Hz - 20kHz (45Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 101 dB SPL, 1W / 1M (133 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 4 OhmsDimensions: 16.5”W x 15”D x 43.75”HWeight: 73 lbs
LS2153 TechnicaL SpecS
The LS1503 is a 3-way profession-al, portable loudspeaker system ideally used as a front of house mains system for small to medium sized events. The LS1503 features a high efficiency 15” low freq. driver, a 6” mid driver and a Titanium high frequency driver mounted to a 90 deg. x 60 deg. constant directivity horn lens. Step up to a 3-way system that offers studio quality sound for your audience.
See LS1503A power specs on pg 14Frequency Resp: +/-3dB 52Hz - 20kHz (46Hz - 10dB)Power Capacity: 400 W continuous, 800 W peak Sensitivity: 101 dB SPL, 1W / 1M (130 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 8 OhmsDimensions: 18.75”W x 15”D x 28.75”HWeight: 58 lbs
LS1503 TechnicaL SpecS
LS1503 $34999
3-way paSSive
LS1503a $54999
Tri-amped 425w powered
$39999 List $695
List $1095$59999
LS1801 $34999
18” paSSive SuBwoofer
$39999
List $695
LS2153 $39999
duaL 15” paSSive 3-way
$44999 List $695
Only 73 Lbs.
Only 58 Lbs.
Only 69 Lbs. - 4” voice coil
Only 122 Lbs. - 4” voice coils
4” voice coils
LS1802 $54999
duaL 18” 1600w SuBwoofer
$59999 List $1095
LS SERIESHIGH PERFORMANCE 3-way Systems
$11/mo.
$16/mo.
$12/mo.
$11/mo.
$16/mo.
List $1095
$59999 $16/mo.
LS1801a $54999
700w powered SuBwoofer
4” voice coils
Only 98 Lbs.
The LS1523 is a 3-way professional loud-speaker system ideally used as a front of house mains system for small to medium sized ven-ues. The LS1523 features dual high efficiency 15” drivers for low frequency reproduction, two 6” mid drivers for articulate midrange reproduction and a Titanium high frequency driver. If you need high output and 3-way clear sound reproduction, step up to the LS1523.
See LS1523A powered speaker specs on pg 12Frequency Resp: +/-3dB 49Hz - 20kHz (43Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 101 dB SPL, 1W / 1M (133 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 4 OhmsDimensions: 22.5”W x 15”D x 46.75”HWeight: 98 lbs
LS1523 TechnicaL SpecS
LS1523 $54999
3-way paSSive
LS1523a $74999
Tri-amped 900w powered
$59999 List $1095
List $1495$79999
$16/mo.
$22/mo.
LS1518 $87999
LS1523 (x2), LS1801 (x1) PRO10S (x2)
pacKaGe deaLS
LS1518a $126999
LS1523A (x1), LS1801 (x1) PRO10XLR (x2)
The uLTimaTe LS SeT up!
16 800.854.2235 carvin.com
The TRx153b is an exceptional 3-way enclosure featuring a powerful 600w, 3” voice coil, heavy duty cast 15” low frequency driver, 60˚x40˚ horn loaded medium throw 8” mid driver, and 60˚x40˚ horn loaded Hi frequency pro driver. The TRx153b can be run passively with its com-puter-tuned, internal crossover or it can be con-veniently switched out for full tri-amp access. Ideally matched to the TRx218b, the TRx153b can be stacked on top of a vertical TRx218b for an over-the-crowd, 7 foot tower, or stacked side by side with another TRx153b on a horizontally laid TRx218b for 120 ̊of coverage. The TRx153b includes 12 fly points for overhead suspension.
Frequency response: 62 Hz to 20 kHz +/- 3dBuseable Low Frequency: 50 Hz (-10dB)impedance / Power Handling:Full Range Passive: 8 ohms / 600 WrmsTri Amped: LF: 8 ohms / 600 Wrms MF: 8 ohms / 200 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Tri Amped: LF: 100 dB MF: 102 dB HF: 105 dBDirectivity: 60 deg. Horizontal 40 deg. VerticalConnections: Neutrik NL4 and NL8 connectorsConfigurations: Full Range Passive or TriampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20”WF x 12.75WB x 17.25D x 41.75H”, 95 lbs
TRX153b TechnicaL SpecS
The powerful TRx118b & TRx218b subwoofers, features a new custom engi-neered, high Q 4” voice coil cast 18” driver allowing for a tighter, powerful sub-bass in a smaller cabinet design. The compact design is ideal for both large and small venues.
TrX 18” SuBwooferS
TRX153b without grill
Frequency response: 60 Hz to 18 kHz +/- 3dBuseable Low Frequency: 54 Hz (-10dB)impedance / Power Handling:Full Range Passive: 8 ohms / 400 WrmsBi Amped: LF: 8 ohms / 400 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 18.5W x 14.5D x 24H”, 51 lbs
TRX152 TechnicaL SpecS
TRX153b 15" 800w 3-wAy MEdIuM THROw MAIN
TrX153b $59999 List $1195
Serial No.XXX000
MADE IN THE
USAINPUT THROUGH
NL8 PINOUT1+ LOW POS.1– LOW NEG.2+ MID POS.2– MID NEG.3+ HIGH POS.3– HIGH NEG.4+ THROUGH4– THROUGH
TRI AMP
FULLRANGE
PASSIVE
NL4 PINOUT1+ INPUT POS.1– INPUT NEG.2+ NOT USED2– NOT USED
c
3 WAY LOUDSPEAKER SYSTEMPOWER CAPACITYFULL RANGE PASSIVE – 600Wrms / 8 ohmsTRI AMP LF – 600Wrms / 8 ohms MF – 200Wrms / 8 ohms HF – 60Wrms / 16 ohms
Easy passive or tri-amp changeover
2500-218b-2 $194999
1 DCm2500 amp, 2 TRX218b, 2 PRO50TL cables
SUBWOOFER SYSTEM
The powerful compact TRX122 12” & TRX152 15” monitor/mains are ideal for stage monitoring vocals with its sweet, focused high end, balanced mids and tight low end. The cabinet is designed with a 45 degree tilt for nor-mal monitoring and a 62.5 degree tilt for near field monitoring. With its 8 fly points and pole mount, it works well for front of house mains in smaller venues.
TRX Main/MoniToRS
Frequency response: 35 Hz to 150 Hz +/- 3dBuseable Low Frequency: 29 Hz (-10dB)impedance / Power Handling: 8 ohms / 800 WrmsSensitivity: (SPL 1W/1M) 98 dBConnections: Neutrik NL4 connectorsConfigurations: SubwooferEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20W x 22.5D x 24H”, 78 lbs
TRX118b TechnicaL SpecS
2000-118b-2 $129999
1 DCm2000 amp, 2 TRX118b, 2 PRO50TL cables
SUBWOOFER SYSTEM
TrX122 $32999
List $649
TrX218b $79999 $69999List $1495
• BALTIC BIRCH • DURATEX™ FINISH
TRX122 & TRX152 are both pole mountable as mains.
Frequency response: 68 Hz to 18 kHz +/- 3dBuseable Low Frequency: 60 Hz (-10dB)impedance / Power Handling:Full Range Passive: 8 ohms / 300 WrmsBi Amped: LF: 8 ohms / 300 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 16W x 12.5D x 20.5H”, 32 lbs
TRX122 TechnicaL SpecS
Frequency response: 35 Hz to 150 Hz +/- 3dBuseable Low Frequency: 29 Hz (-10dB)impedance / Power Handling: 8 ohms / 800 WrmsSensitivity: (SPL 1W/1M) 102 dBConnections: Neutrik NL4 connectorsConfigurations: SubwooferEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 40W x 22.5D x 24H”, 143 lbs
TRX218b TechnicaL SpecS
pL42 pole42” high, 1 3/8” diameter$19.99
CompactLightweight 78 Lbs.
4” voice coil
TRX122 & TRX152 are both stand mountable as mains.
$64999
$37999
$18/mo.
$10/mo.
TrX152 $34999
List $695
$39999$11/mo.
TrX118b $44999 $41999 List $895
$13/mo.
$39/mo.
$21/mo.
$58/mo.
MADE IN
USAMADE IN
USA3 YEAR WARRANTY
Compact 143 Lbs. 4” voice coils
17800.854.2235 carvin.com
Frequency response: 62 Hz to 20 kHz +/- 3dBuseable Low Frequency: 50 Hz (-10dB)impedance / Power Handling:Full Range Passive: 8 ohms / 600 WrmsTri Amped: LF: 8 ohms / 600 Wrms MF: 8 ohms / 200 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Tri Amped: LF: 100 dB MF: 102 dB HF: 105 dBDirectivity: 60 deg. Horizontal 40 deg. VerticalConnections: Neutrik NL4 and NL8 connectorsConfigurations: Full Range Passive or TriampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20”WF x 12.75WB x 17.25D x 41.75H”, 95 lbs
Frequency response: 68 Hz to 18 kHz +/- 3dBuseable Low Frequency: 60 Hz (-10dB)impedance / Power Handling:Full Range Passive: 8 ohms / 300 WrmsBi Amped: LF: 8 ohms / 300 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 16W x 12.5D x 20.5H”, 32 lbs
TrX153-44 $839999
List $18,823 Package Savings $719Passive 4-way system with sub rackPackage contains• Four TRX153 • Four TRX218b• One TRX1mAiN Rack • One TRX2SuB Rack
TrX153-22 $479999
List $10,359 Package Savings $369
Passive 4-way systemPackage contains• Two TRX153 • Two TRX218b• One TRX1mAiN Rack
TrX153-22T $619999
List $12,543 Package Savings $481Tri-amp plus Sub 4-way systemPackage contains• Two TRX153 • Two TRX218b• One TRX2SuB Rack • One TRX3TRi Rack
Sp8250 $38999
250 ft. 12ga 8 conductor speaker wire
Sp8 $1699
eaNL8 Speakon™ connector 8-pin
Choose from two, 4-way passive crossover systems and two, 4-way active crossover systems. All TRx sys-tems include power amplifiers, cables, and racks. Choose your own mixing console from pages ( 3 - 9 ) and receive an additional 10% off of the lowest marked price.
SYSTEM QTY TRX122 AMP CABLES INCLUDED SYSTEM TRX1222 two none 2 PRO50TL $659.99 TRX1224 four none 2 PRO50TL, 2 PRO25TL $1249.99 TRX1222-M2 two DCM1015 2 PRO50TL, 2 PRO10P $1079.99 TRX1224-M4 four DCM1015 4 PRO50TL, 2 PRO10P $1699.99
12” TRX122 MoniToR SYSTeMS—WiTh pacKaGe DiScoUnTS
SYSTEM QTY TRX152 AMP CABLES INCLUDED SYSTEM TRX1522 two none 2 PRO50TL $699.99 TRX1524 four none 2 PRO50TL, 2 PRO25TL $1349.99 TRX1522-M2 two DCM1015 2 PRO50TL, 2 PRO10P $1129.99 TRX1524-M4 four DCM1500 4 PRO50TL, 2 PRO10P $1779.99
15” TRX152 MoniToR SYSTeMS—WiTh pacKaGe DiScoUnTS
TRX MoniToR SYSTeMS
TrX1main $234999 rack• Two DCm2000 Amps• One DCm2570 Amp• One XC3000 Crossover• Four PRO50TL Speakon cables• Two PRO10TL Speakon cables• Four PRO10XLR cables• One 12 space Rw12 rack w/ casters
TrX2SuB $149999 rack• Two DCm2000 Amps• One XC3000 Crossover• Two PRO50TL Speakon cables• Two PRO10XLR cables• One 12 space Rw12 rack w/ casters
TrX3Tri $234999 rack• One DCm600 Amp• One DCm1500 Amp• One DCm2570 Amp• One XC3000 Crossover• Six PRO10XLR cables• One SP8250 8 conductor wire spool• Six SP8 (NL8) • 8 SP4 (NL4)• One 12 space Rw12 rack w/ casters
Packages feature multiple monitors, two monitor mix setups with multiple monitors and 4 monitor mix setups with multiple monitors.
Tri-amp plus Sub 4-way systemPackage contains• Four TRX153 • Four TRX218b• One TRX2SuB Rack • One TRX3TRi Rack• Two DCm2000 • Two SP50 • Two XLR8
TrX153-44T $949999
List $21,007 Savings $1021
SaVe$170
SaVe$250
SaVe$250
TRX MainS SYSTeMS
$20 per month
$38 per month
$32 per month
$51 per month
$21 per month
$41 per month
$34 per month
$54 per month
$45/mo. $74/mo. $74/mo.
MADE IN
USAMADE IN
USA3 YEAR WARRANTY
$144/mo.
$186/mo.
$252/mo.
$285/mo.
18 800.854.2235 carvin.com
dJ MixerpRo-MiX 7 $29999
List $599 24-BIT DSP256 EFFECTS
PRISTINE SOUND - VERSATILE - EASy TO USE
CHANNELS• 7 channels with ultra low-noise preamps • Freq. response: 20 - 20k Hz with less than 0.01% THD • 4 stereo channel faders for CD, tape and turntables
CH INPUTS• 4 PAIRS L/R RCA INPUTS: Line & Phono (RIAA) equalized • 4 segment LED metering for each channel • 3 professional XLR balanced and 1/4” mic inputs
CH EQUALIZATION • Active 3-band EQ on every channel Lo, Mid & Hi
PROCESSOROne 24-Bit effects processor with 256 effects • Reverbs, Echo’s, Flanging, Chorus - adjustable parameters • Assignable to crossfade mix A /B and Mic 1-3
MASTER • Talk-over switch • A/B Crossfader • Master output fader with L/R LED metering• Monitor pan mix from Master or Cue • Monitor level
The S16 new ultra-low noise preamps (same as SL console) provide noiseless and distortion-free studio recordings. The exclusive 44w stereo power amp section will give ample power to your passive studio monitors • 8 phantom powered XLR Mic pre-amps • 4 stereo (8 mono) chan-nels with gain switches • channel inserts • 3 band channel EQ • dual effects sends • ste-reo pan • headphone jack • LED VU meters • two balanced XLR outputs and two 1/4” out-puts • effects send and return jacks • RCA tape in and out.
S1 6 16 CH RECORdING uSB Mixer
Freq. response: 20 - 20 kHz ±1 dBTHD distortion: less than .002%Equivalent input noise: -128dBmS/N Ratio 100 dBDynamic Range: 114 dBMic Gain: 45 dBLine Gain: 30 dBTotal Gain: 65 dB (balanced)Max Output: +20 dBmEQ Section HI ±15 dB @ 12k Hz MID ±10 dB @ 2.2k Hz LOW ±15 dB @ 85 HzStereo Power Amp: 44w RMSSize/Wt: 16W x 12D x 3”H Wt: 8 lbs
STUDIO MATE S16 SPECS
Frequency Response: 75 Hz to 19.5 kHzPower Handling: 125w RMSRecommended Amp: 50 to 150 wattsNominal Impedance: 8ΩInputs/Outputs: Two 1/4”(PM5B) , two spring terminalsWoofer Enclosure Type: Vented BoxConstruction: Molded EnclosureDim/Wt: 10.5”H x 6.75D” x 6.75W • 4 lbs.
pM5 TechnicaL SpecificaTionS
The PM5-B is simply the best spot/reference monitor made! • As a true 2-Way system, you get the full audio spectrum from 86 to 19.5kHz. • This multi-purpose monitor yeilds excellent high frequency and exceptional bass from a heavy-duty 5 1/4” woofer. • 125W capacity • High output level is “big” sounding, not what you’d expect from a small enclosure. • High impact molded enclosure incorporates mounting slots for hanging. • The Black PM5-B features a 20-degree angle insert bracket to accept a mic stand for spot monitoring & dual 1/4” speak-er jacks (so you can daisy-chain PM5-B’s together) along with wire terminals. The PM5-W (white) features wire terminals.
PM5 125w REFERENCE SPOT MONITOR
Applications: Spot monitor/reference monitor for studios, home theater, auditoriums & clubs. Water resistant for indoor/outdoor installations.
pm5-w $6999
white
pm5-B $7999
Black–stand mount & 1/4” jacks
• Monitor select to Cue from 1 - 4 CH• Monitor (headphone) 1/4” jack • MONTIOR (mono) 1/4” jack • Aux Mono/Sub output Level control • 150 Hz crossover with Bypass • Zone output level control w/source switch from Master or Monitor • Zone 1/4” output jack
MAIN OUTPUTS/ENCLOSUREMaster Outputs: XLR bal. - L/R, Mono/Subwoofer • Master Outputs: L/R main (for cuing, R/L record)Aux Outputs: Zone and two Monitor 1/4” outputs • Black powder coat steel: 19W x 3.5D x 8.5H”, 9 lbs • Built in power supply - no wall-wart, 90 to 250V 50-60 Hz
S16 $29999 List $395
R162 Rackmount Kit $14.99
$9/mo.
$9/mo.
neW!exclusive 44w
Stereo power amp
19800.854.2235 carvin.com
PM5 125w REFERENCE SPOT MONITOR
SL DESIGN The SL evolved from serious live/recording design studies resulting in a state-of-the-art console that offers pristine performance. Renown for its trans-parent clean sound and performance.
• EIN better than -128 dB• THD lower than .002%. • Bandwidth 10 Hz to 80k Hz (Mic. In - Master Out)• Crosstalk less than -80 dBu @ 1k Hz
CHANNEL FEATURES• Direct Out - balanced• Tape In - balanced• Line In - balanced• Mic. In - balanced• Insert - TRS• +48V Switch per 8 CH• Phase Switch• Tape In Switch• Low Cut Filter• 4 Band EQ - 2 Mid Sweeps• EQ Bypass switch• 8 Aux sends• Pre/Post switch for Aux 3/4 & 5/6• Aux 7/8 Pan control• Tape to 5-8 switch• Aux 7/8 Pre Fader with EQ switch• Solo switch with LED• Mute switch with LED• L/R bus assign switch• 1-8 bus assign switches• Long throw 100mm fader• CH Metering (10 segment LED’s)
MASTER FEATURES• L/R MASTER faders• 8 SUB GROUP faders w Peak/Mute LED’s L/R Pan , Mute, & Solo• 8 AUX SENDS PFL switches, Group Flip 1-4 switches• 4 STEREO RETURNS Level, L/R Pan, Aux 1, 2 Levels, Mute, Solo sw• TAPE IN - L/R or Aux 1/2• TAPE OUT - L/R / Aux 7/8• CONTROL RM GROUP (level to) L/R, Aux 1/2, Aux 7/8, Tape, Mono, Studio• STUDIO GROUP Level to L/R, Aux 1/2, Aux 7/8• Metering - 8 sub + L/R (10 segment LED’s)
MASTER CONNECT• L/R Master (XLR & TRS)• 8 Master Sub Groups (XLR-bal.)• 8 Master Inserts. L/R (TRS)• 8 AUX Sends (TRS-bal.)• 4 AUX Stereo Returns (L/R, 8-TS)• Tape L/R IN/OUT(RCA)• 2 High current Headphone (TRS)• External 2U Power Supply (4-wire NL4 Speakon™)
CONSTRUCTION• Copper shielded FR-4 Fiberglas™ circuit cards• High slew rate 4565 & 2043 op-amps• 1% tolerance SMT components• Sealed controls• Powder coat steel chassis• 1000 watt external 2U SLP5600 power supply• Standard 10’ Speakon™ cable to connect power supply
SL40c 40ch
FREE Rw40 HEAVy DuTy ROAD wARRiOR CASE
G12V 12V XLR mini-light $29.99 ea (accepts up to 3)
$359999List $6995
SL Studio Live 40 CH 8 Bus Console
SLP5600POwER SUPPLY
$108/mo.
DIMENSIONS/wTSL40C: 52.0”W x 22.7”D x 8”H, 68 lbs. add 2.25”total width for handles
20 800.854.2235 carvin.com
dyNAMIC ANd CONdENSER MICS The m50 is Carvin’s “value priced” profes-sional vocal mic that is not to be compared with the poor perfor-mance of other $49 mics. Unidirectional with a cardioid polar pattern. Features a c o n v e n i e n t o n / o f f switch built in foam wind screen for pop, breath & wind noise rejection. Freq. Resp. is 50 Hz to 14 kHz.
SAVE 5% when 4 or more mics are purchased
Together with Carvin’s Cm90E as overhead mics, the D44 and D42 uni-directional dynamic mics are all you need to mic your drums. Both models are capable of han-dling high sound pressure levels and a uni-directional cardioid polar pickup pattern for rejecting unwanted sound. The Zinc die-cast metal housing features an adjustable stand mount.
The Cm90E is a unidirec-tional condenser mic. • Extremely flat response and wide frequency range of 30Hz to 20kHz will give the user exceptionally accurate results in recording and sound rein-forcement applications • High sensitivity for use in distant miking such as choirs, podi-ums and conference rooms • Excellent for overhead drum miking with max SPL at 132dB • Cardioid polar pattern gives maximum rejection of off-axis sounds for excellent feedback control.
The m68 microphone is our most popular unidirectional hand-held dynamic micro-phone. It is renowned for its presence and crisp output for live vocal applications. • Frequency response is 45Hz to 15kHz • Built-in foam wind screen for excellent pop, breath and wind noise rejection • Cardioid polar pattern for excellent off-axis performance and feedback control.
d44 $5999 List $99
BASS DRum miC
d42 $4999 List $89
SNARE-TOm TOm miC
m68 $7999 List $159
uNiDiRECTiONAL DyNAmiC VOCAL miC cm90e $11499 List $239
uNiDiRECTiONAL CONDENSER miC
dRuM MICS
FREE 20ft XLR mic cable
m50 $4999 List $129
uNiDiRECTiONAL DyNAmiC VOCAL miC
List $599dmK7 $39999 SAVE $84
7 miC KiT: One D44, Four D42, Two CM90E
dmK3 $12999
SAVE $30 3 miC KiT: One D44, Two D42
List $285
cTm100 $24999 List $659
TuBE CONDENSER STuDiO miC
FREE 20ft XLR mic cable
FREE 20ft XLR mic cable
awesome Tube Warmth
• EQ’d for studio monitoring • Lightweight comfortable fit • High Quality closed back design• Neodymium magnet• 9ft cord-gold plated 1/8”connector(1/4” adaptor included)• Freq. Resp: 20 - 22 kHz • Imp: 64ohm• Sens: 106dB S.P.L. at 1KHz +/- 3dB
h40m $4999 List $129
STuDiO HEADPHONES
Note: drum mics do not ship with XLR cables
SPECIFICATIONS: FREQUENCy RESP.: D42: 80Hz to 13kHz D 4 4 : 2 0 H z t o 1 0 k H z , M A X I M U M S P L ( @ 1 % T H D ) D 4 2 : > 1 3 0 d B , D44: >140dB
TuBE CONdENSER MIC The Cm87S is a high quality, multi-purpose Large Diaphragm Studio Condenser mic. It features a cardi-oid pattern with a Gold Sputtered, 6 micron element and premium, noiseless FET electronics. A 10 dB pad switch handles really hot sig-nals and a low cut switch reduces rumble. Ideal for stunning vocals as well as capturing nuances of an acoustic guitar. A max. SPL of 145dB (with 10dB pad) also makes it an excellent instrument and per-cussion mic. SPECIFICATIONS:Freq. Range: 30Hz-20 kHz, Dynamic Range: 133 dB, Output Imp.: 200 Ohms, Pad Switch: 10dB, Low Cut Switch: -6dB @ 80Hz , Shockmount: eliminates low freq. vibration & handling noise (-72 dB below 40Hz), Power Supply: 48V (Included) Cable: Oxygen-free 30 ft. cable Mic Dimensions: 7.5”L x 2.75”WCase: Custom aluminum flight case
Optional pop screen wS87: $29.99
CONdENSER MIC
cm87S $14999 List $495CONDENSER STuDiO miC
The CTm100 is perfect for recording both criti-cal vocals and instruments for the warmest, fullest, smoothest sound. The dual diaphragm, multi-pattern design gives you 9 different polar patterns to get the perfect sound every time! you will not need to EQ this mic - it sounds awesome right out of the box! The CTM100 features dual 1” gold sputtered 5 micron diaphragms in a special shock mounted capsule and a vacuum tube pre-amp. The included power supply houses the control for the 9 different polar patterns. The shock-mount suspension virtually eliminates vibra-tion and handling noise. If you want your recordings to sound as warm and full as your favorite artist, the CTM100 is the ulti-mate in classic sound reproduction! SPECIFICATIONS:Freq. Range: 20 Hz - 20 kHz, Dynamic Range: 133 dB, Output Imp.: 300 Ohms, Power Supply: 48V Cable: 30 ft. Gold 7-pin cable, Mic Dimensions: 9.75”L x 2.75”W Includes: travel case, foam windscreen, shockmount suspension, XLR cable and carry pouch for mic.
21800.854.2235 carvin.com
The UX16 16-channel professional wireless systems offer the freedom of running multiple systems simultaneously The UX16-MC hand held system utilizes our finest M68 ele-ment for crisp hi-end with a smooth bottom-end • The optional UX16-ID 7-color ID end caps let you know who’s on what channel • Our latest dual AA batteries technology replaces the old 9V battery system lasting up to 25 hours • The PLL (phase lock loop) engineering uses UHF technology (ultra high frequencies) to assure the signal carrier is locked-in for up to 300’ • Dual Diversity receivers automatically switch to the best signal path so you don’t get drop-outs • Full bandwidth with less than .5% THD delivers impeccable sound that even the high priced systems lack.
16 CHANNEL uHF IN EAR SySTEMS• 16 UHF Channels • Stereo Monitoring• Digital clarity earpieces• Premium Koss™ Ear pieces • Purchase unlimited receivers
uX-dr $29991u rackmount kit for 1 or 2 uX16 or uX1000
uX-GT $2299 mini XLR to 1/4” instr. cable for body packs
uX-Lp1 $7999 Lavalier mic for body packs
uX16-Bp List $445 $21999
Body pack and uX16 receiver uXBP16 body pack only $139.99Order instrument cable, headset mic or lavalier mic separate
SPECIFICATIONS: 50 Hz to 18 kHz. S/N ratio: 100dB, Audio Input: 600Ω XLR. Stability: ±.005%, Freq. stability: ±0.005% crystal con-trolled, powered by AC/DC power adapter (provided). Warranty: 90 days, batteries required.
pm1000 List $599 $29999
with KOSS™ ear pieceS Includes Pm1000 transmitter & Pm1001 receiver
uHF wIRELESS SySTEMS
uX16-id $1499 7 colored end caps for mic iD
pm1001eXTra receiverS$12999
The UX1000 is our finest wireless system featuring 960 user selectable channels with diversity UHF receivers. Superb tone, anti-feedback control, low battery indicator and assignable groups are just some of the features of the UX1000. Select either the UX1000-MC hand held mic or the UBP1000 belt-pack transmitter. Step up to a wireless system that will meet all your expectations.SPECIFICATIONS: 50 Hz to 19 kHz. S/N ratio: 101dB, Receiving System: Diversity- PLL Synthesized, Stability: ± 0.005%, Image Rejection: >60 dB, THD: ≤1% @ 1kHz, RF Sensitivity: -107dBµ for 12 dB S/N AD, Audio Output: -12 dBµ / 800 ohm -unbalanced, Output Conn.: Unbalanced 1/4” phone jack, Balanced XLR, Steel case, 8.3” W x 1.6” H x 5.4” D, Net Weight: 2.3 lbs, Warranty: 90 days, batteries required.
uX1000-mc List $895$42999
Hand Held mic and uX1000 receiver
uX1000-Bp List $795 $39999
Body pack and uX1000 receiver • uBP1000 body pack only $249.99Order instrument cable, headset mic or lavalier mic separate
ACCESSORIES FOR UX16-BP & UX1000-BP
uX-hm2 $9999 Headset mic for body packs
uX16-mc List $495 $22999
Hand Held mic and uX16 receiver
Carvin’s In-Ear monitors can actually improve the quality of your performances by letting each performer hear themselves, as well as others in the group, clearly. UHF operation puts them high above radio and TV interfer-ence, as well as increasing their effective range (up to 300’. typical). The Pm1000 offers 16 user-selectable channels – virtually eliminating any chance of interference by other wireless units. Stereo or mono transmission modes allow easy integration into any sound system. Use the Pm1000 transmitter with as many PM1001 receiver/In-Ear units as you want, or use multiple Pm1000 transmitters for separate monitor mixes. SPECIFICATIONS: 50 Hz to 12 kHz. Audio Input: 600Ω XLR. Stability: +-.005%, 16 PLL sythesized UHF channels, powered by AC power adapter (provided). Warranty: 90 days. 9V battery required.
eXTra KOSS™ear pieceS
KoS1 $2399
UX1000 rear
16 CHANNELS
To take the kind of abuse that I tend to dish out on stage to my gear... Carvin wirelesses must be made of steel. Cause thats what it seems like. Sturdy and absolutely the most reliable piece of equipment I own. Hands down.– Mike D. Killswitch Engage
960 channeLS4 uSer GroupS
22 800.854.2235 carvin.com
• Steel enclosure• Premium XLR connectors• Braided steel strain-reliefs (not plastic)• Heavy 22 ga individually shielded copper wire• SK8-100 100’ ideal for on-stage distribution• SK16 & SK24 feature 8 XLR returns
SK8-100 8 CH + 4 returns—100’ $149.99SK12 12 CH + 4 returns—100’ $229.99SK16 16 CH + 8 returns—100’ $299.99SK24 24 CH + 8 returns—100’ $399.99
SNAKE CABLES
pro5TL 5’ 12 GA spkr cable - 2 cond. $22.99pro10TL 10’ 12 GA spkr cable - 4 cond. $29.99pro25TL 25’ 12 GA spkr cable - 4 cond. $39.99pro50TL 50’ 12 GA spkr cable - 4 cond. $59.99pro100TL 100’ 12 GA spkr cable - 4 cond. $99.99
1/4” PREMIuM 15GA SPEAKER CABLES
pro5S 5’ 15 ga speaker cable $11.99pro10S 10’ 15 ga speaker cable $14.99pro25S 25’ 15 ga speaker cable $18.99pro50S 50’ 15 ga speaker cable $24.99
mTf55 XLR cable ground lifter $17.99
mTm65 male XLR to 1/4” matching trans. $17.99
mTf60 female XLR to 1/4” matching trans. $17.99
INSTRuMENT ANd LINE CABLESPremium instr. & mic cables features low-noise, heavy gauge copper wire for superior performance.
pro3p 3’ shielded 1/4” patch cable $7.99pro10p 10’ shielded 1/4” patch cable $9.99pro20p 20’ shielded 1/4” instr cable $16.99pro20pr 20’ shielded rt. angle 1/4” cable $16.99pro20c 20’ braided tweed 1/4” cable $16.99
ad64 1/4” plug to 1/4” plug $6.99
rc30 1/4” plug to RCA plug $6.99
ad66 RCA plug to 1/4” plug $6.99
ap1 stereo 1/4” plug to R & L 1/4” jacks $7.99
ad70 male XLR to 1/4” stereo $10.99
ad71 female XLR to 1/4” stereo $10.99
rr10 10’ 1/4” stereo plug to L/R RCA $10.99
MIC ANd LINE XLR CABLES
XLrm Male XLR$4.99
XLrf Female XLR $4.99
pro3XLr 3’ bal. shielded mic w XLR’s $6.99pro10XLr 10’ bal. shielded mic w XLR’s $9.99pro25XLr 25’ bal. shielded mic w XLR’s $19.99pro50XLr 50’ bal. shielded mic w XLR’s $29.99
TRANSFORMERS
XLpm2 Stainless steel dual male XLR plate. For custom installation. $16.99
XLpf2 Stainless steel dual female XLR plate. $16.99
aB1 1/4” to 1/4” footswitch. For A/B switching of guitar, line, or speakers (for inputs or outputs). $22.99
These 1/4” 6 inch long assorted colored cables are sold in packages of six.Sh66 $9.99 6 cables per package
pB48 STereo paTch Bay features 1/4” bal. connections for both the front & rear panel. Patch bay may be used either bal.or unbal. Front panel jacks are “half-normalled” & can easily be configured as “not normalled” without soldering if desired. $39.99
fdr60 Direct box with 1/4” input, balanced XLR outputs. Includes input attenuator and ground lift. $29.99
phw22 Phantom power supply. Switchable 12v or 48v phan-tom supply for condenser mics. Dual XLR inputs and outputs. $39.99
aDapToRS
PRO20C
Sp4 4-conductor Speakon™ $7.99Sp8 8-conductor Speakon™ $16.99Sp64 Speakon™ coupler $9.99ad40 Speakon™/bannana $19.99ad41 1/4” female to Speakon™ $19.99ad42 1/4” female to Banana $14.99
AD40
AD41
AD42
SP64
r6 6’ cable, 4 RCA plugs to 4 RCA plugs $10.99
pp10 10’ 1/4” stereo plug to R & L mono plugs $10.99
SLc8 8’ stereo 1/4” to 1/4” male $29.99
8 ReTURnS (SenDS) on16 & 24 ch MoDeLS
HIGH CuRRENT SPEAKON CABLES
SP4
23800.854.2235 carvin.com
1/4” PREMIuM 15GA SPEAKER CABLES
MS13 $2999
30” professional fixed boom with adjust-able tripod stand. Includes mic cable clips. Anti-reflective black.
MS11 $2299
36” Telescoping short fixed boom with adjustable tripod stand. Set stand as low as 18”H - ideal for micing bass drum or amp cabinets. Anti-reflective black.
MB9 $1499
35” professional boom. Anti-reflective black.
Ma12 $2999
This amp stand is strong enough to hold a 2 x 12 combo amp or medium sized speak-er. Height adjustments are simple with the quick-lock knob. Holds up to 100 lbs.
SS20 $4999
This speaker stand is adjustable to 6ft 8inches high. It will support speaker enclo-sures up to 85 lbs. For use with speakers fea-turing pole mount cup. Anti-reflective black.
MR20 $6999
This heavy-duty adjustable stand will hold over 150 lbs and makes getting to your mixer controls easy. You can mount your power amps underneath the mixer with the built-in 12-space 19” rack rails. Features a set of sturdy casters. Anti-reflective black.
GSD3 $1499
This compact high quality guitar stand is perfect for both acoustic and electric gui-tars and basses. Anti-reflective black. RS20882 $6399
Folding tubular stand with rubber cush-ion-holds 7 guitars-acoustic or electric.
GSD $1199
Quality tubular stand with rubber cov-ered contact points won’t scuff glossy or natural wood finishes. Secure, safe support for your guitar. Adjustable neck height. Anti-reflective black.
DB35 $3999
24“ x 16“ dolly board features non-skid Duratuff II™ and heavy-duty 31/2” swivel casters with a double bearings system. will withstand weights up to 1000 Lbs!
MST12 3999
This fully adjustable tripod music stand features a 13” x 19” sheet holder that can be adjusted to any angle (pivots 180˚)! Extends to 46” high. Anti-reflective black
SS20 $4999
MS11 $2299
MB9 $1499
GSD3 $1499
MS15 $1999
This mic stand features a low silhouette cast base for high stability. The positive grip action clutch provides quick adjust-ments from 34” to 62”. Anti-reflective black.
MST12
3999
DB35$3999
MK18 $4499
This heavy-duty keyboard stand uses a quick-set mechanism for fast set-ups, great-er adjustment range and superior strength. Holds over 150 lbs. Adjustable height: 27”- 34 1/2”. Spread: 21”- 29 1/2”. Base width: 20”. Anti-reflective black.
6’ 8” speaker
stand
Heavy duty Cases and Stands
MS15 $1999
MK18$4499
GSD $1199
RS20882 $6399
Quick release
adjustment lever
Protect your 19” rack gear in Carvin’s heavy-duty Road warrior™ cases featuring plywood inner walls (not fiberboard). u spaces inside overall
rw4 4 18.5d 21w x 19d x 8.75”h $79.99 rw5 5 12.75d 20.5w x 13.2d x 10”h $89.99rw6 6 18.5d 20.75w x 19d x 12”h $99.99 rw8 8 18.5d 20.75w x 19d x 15”h $119.99rw12 12 18.5d 20.9w x 23d x 23.75”h $179.99with casters
RoaD WaRRioR™ caSeS
RW16 16 space $299.99shockmount / casters premium plywood- not fiberboard
SS10 $4999
MS9 $1599
Mini mic stand with boom.
SS10 $4999
wall mount speaker bracket for use with speakers featuring pole mount cup. Anti-reflective black.
MB1 $3999
Rw16 16U shockmount case
Shockmountfoam core
cB2 $2999
MR20 $6999
MS13
$2999
Heavy duty speaker stand bag with handles. Made out of rugged fabric. Holds two stands.
Ma12$2999
MS9 $1599