Hana Upgrade Step by Step

Generated by Jive on 2015-01-19+01:001

My first HANA upgrade - view on the basisside + Step by Step

Introduction:

After I finish my first HANA upgrade I want to share with you the upgrade documents, Prerequisites,important note's, errors and solution.

Upgrade duration was 20 minutes amazing!!!

I had during the upgrade errors for more information, please check at the end of the blog.

SAP HANA SPS08 What's new? The technical side: SAP documents, SCN blogs

http://www.saphana.com/community/blogs/blog/2014/05/28/what-s-new-in-sap-hana-sps-08http://help.sap.com/saphelp_hanaplatform/helpdata/en/81/faed74b8894160917dd43372618a37/content.htm?frameset=/en/81/faed74b8894160917dd43372618a37/frameset.htm&current_toc=/en/6f/22be4fb8c24038bcaf02f91d75b2a1/plain.htm&node_id=3https://www.youtube.com/playlist?list=PLkzo92owKnVwQAKI4s23cOi-gU4qI4YkZhttp://www.saphana.com/docs/DOC-4685My point of view:In my company we used the HANA server to COPA. the SAP CO-PA Accelerator, powered by SAPHANA, empowers organizations with easy access to data to make timely decisions.https://www.youtube.com/watch?v=ZuT16HWAgrMhttp://www.sap.com/pc/tech/in-memory-computing-hana/software/profitability-analysis/index.html

Before upgrading the HANA DB from SPS06 to SPS08 we have a lot of memory and CPU consuming, the totalmemory available on the host is used, CPU resource are running low,And more important problem we did not expect them.

For you can feel it, I I'll put some pictures here:

My first HANA upgrade - view on the basis side + Step by Step


Picture 0.1 DBACOCKPIT administration

Picture 0.2 Alerts from DBACOCKPIT



Picture 0.3 HANA studio administration

After the upgrade like a magic the CPU and memory consuming are decreased, and the system works so fast!!

Tasks you need to take care before you start the upgrade Before I start the upgrade I had to upgrade GCC 4.7 (2001528) and to Run script keepTransaction.py(1919033) and script MERGE_ALL_TABLES (1919034) see details in Prerequisites and planning.

SAP information:

When to upgrade your SAP HANA system?SAP HANA Revision Strategy

Please check "SAP Note 1948334: SAP HANA Database Update Paths for Maintenance Revisions" for thepossible update paths from Maintenance Revisions to SPS Revisions.

SAP Guide:

http://help.sap.com/hana/SAP_HANA_Master_Update_Guide_en.pdfhttp://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf



SAP Note's:

1514967 - SAP HANA: Central Note 2004651 - SAP HANA Platform SPS 08 Release Note 1523337 - SAP HANA Database: Central Note 2000003 - FAQ: SAP HANA 1944799 - SAP HANA Guidelines for SLES Operating System 2009879 - SAP HANA Guidelines for RedHat Enterprise Linux (RHEL) 2001528 - Linux: SAP HANA Database SPS 08 revision 80 (or higher) on RHEL 6 or SLES 11 1918267 - SAP HANA DB: corrupt deltalog of column store table 2052914 - ODBC driver issue after upgrade to Revision >= 82 1995791 - HLM: Updating SAP HANA Troubleshooting

Source release:SPS 06 Rev 64

Target release:SPS 08 Rev 84

Prerequisites and planning: If you upgrade from a lower SAP HANA SPS, it is recommended to update ALL other components

(Studio, Modeler, DB Clients, DBSL, SLT, DS, ...) to at least the minimal version of SAP HANA SPS08.

In order to run the SAP HANA Database Revision 80 (or higher) on SLES 11, additional operatingsystem software packages are requiredTherefore you need to install an additional runtimeenvironment for GCC 4.7 Before you start the upgrade or the installation of Revision 80 or higher,please check out SAP Note 2001528.

If you upgrade from a Revision prior to SPS6, first upgrade your system to the latest SPS6 Revision(69.07) before upgrading to Revision 82.00. (X)

Please make sure to read note 2052914 (ODBC driver issue after upgrade to Revision >= 82) beforedoing the upgrade

Before you start the upgrade from Revision 64, 65 and 66, please check outSAP HotNews Note 1918267. (1919034 - Related to 1918267: How to run procedureMERGE_ALL_TABLES) Please check details below

Before starting the update for the components in your SAP HANA landscape several prerequisites have to be

fulfilled. Make sure you fulfill the following prerequisites: from SAP_HANA_Server_Installation_Guide_en.pdf

If you are performing an offline update, you have all the necessary installation files for the individualcomponents.

You have a valid, permanent SAP license for the SAP HANA database. You have user names and passwords for the following users: adm user sapadm user S-user for the SAP Service Marketplace (SMP)



You have carefully read the update instructions for the individual components You have made the necessary preparations to perform backups for the SAP HANA database and the

other components.

Notes: 1918267, 1919034 (Very important) Run script keepTransaction.py note number 1919033 Run MERGE_ALL_TABLES Note number 1919034

Perform an Update on the SAP HANA SystemThe SAP HANA lifecycle management tool hdblcm(gui) is the recommended tool to update an SAP HANAsystem. With the SAP HANA lifecycle management tool hdblcm(gui) you perform the update from the localhost.To update an SAP HANA system from a remote host you use the SAP HANA lifecycle manager (HLM).

Update Process: from SAP_HANA_Server_Installation_Guide_en.pdf Before updating the SAP HANA components, make sure that no read or write processes are running on theSAP HANA database. Perform the update process in offline mode during a business downtime. After theupdate, you have to start SAP HANA and its components again.

This is a general sequence of the steps you have to perform:1. Stop all processes.2. Make a system backup if necessary.3. Perform an update.4. Update the depending components.5. Perform the post-update steps.6. Restart all processes.

Upgrade Procedure: SAP HANA Lifecycle manager



1. Download Software component from lifecycle management remember you need S-user and downloadthe relevant stack

Picture 1.0



Picture 1.1

2. Press Run to Start the installation

Picture 1.2

You can see the installation successful - Picture 1.2

Picture 1.3



Upgrade duration was 20 minutes!!!

Post-Update StepsAfter an upgrade to a new SAP HANA SPS it is recommended to redeploy the calculation views. For moreinformation, see SAP Note 1962472 - Redeployment of calculation views recommended when upgrading to anew SPS.

Stop the script keepTransaction.py note number 1919033

Upgrade HANA Studio on the Linux

Picture 2.0 After the upgrade we have the messages: update the HANA studio.

Unpack with SAPCAR the studio IMC_STUDIO100_84_0-10009662.SARRun the command: ./hdbinst -a studio --copy_repository= - Picture 2.1



Picture 2.1

Picture 2.2

Log:



Picture 2.3

In case you want to see the log, please go to the path in Picture 2.2

Update studio Procedure:Upgrade from Studio Help Install New software cause error, please check the error at the endof the blog for more information.

Picture 3.0



Picture 3.1

After Picture 3.1 I get an error, please check the information at the end of the blog

Upgrade from Studio Help Check for update



Picture 3.2

After I press on check for update you can see the target studio release and press Next



Picture 3.3

Here you can see the available updates Press next



Picture 3.4

Accept the terms and press finish



Picture 3.5

In Picture 3.5 you can see the update is in process

Picture 3.7

Restart the HANA studio.



Picture 3.8

The HANA studio is updated

Errors and solution:Upgrade Error:



Picture 4.0

You can see the error I get when I start the upgrade. (Picture 4.0)Please follow the following item from note #1995791:Validity: there was a file /usr/sap/HAN.hdbupgrade dated last year

Which was used when the database was upgraded to REL 60. It appears

that the previous upgrade was still in a "hung" state which causes the

error message below (SAP HANA Database installation kit'1.00.60.379371' required)during the manual update as well as using HLM.

Solution: the solution is to mv the file to HAN.hdbupgrade.old and

resume the update. Once resumed a new file HAN.hdbupgrade with recent

date will be generated.

Update Studio Error:



Picture 5.0

Error when I try to update the studio from: Help Install New software Picture 5.0Solution in Note number - 2026732 - Can't update SAP HANA Studio via Update SiteCause:If the differences between studio revisions is great, the Eclipse installer cannot resolve the differences inpackage dependencies.Solution:Users will need to manually upgrade the SAP HANA Studio

I hope this guide will help you to start thinking about upgrading your HANA Server - good luck

Thanks you for reading my document.

Naor

Documents

Hana Upgrade Step by Step