HALVORSEN OFFSHORECorporate presentation

Halvorsen Group overview

• 1842 Engineering workshop established in the south of Norway• �• 1975 First offshore delivery• �• 2013 Integration of :

‒Maritime Industry Services ‒Smart Automation

• �

Companies in Halvorsen Group have a goal to be complete supplier to the global process and topside market

Offices: USA, Norway, Hungary, Singapore

HALVOR SØRENSENFlekkefjord, 1842

Halvorsen – founder

1975 - First offshore deliverySeveral thousands of steel embedded plates the to

Brent and Statfjord Condeeps platforms

Foto: Aker/NOM

Three condeeps in Gannsfjord

Photo: Aker/NOM

Gulftide 1978

• The first offshore multidiscipline job

•Specialty in pressure and temperature

•Glycol Regeneration Units, System for antifreeze

execution, Tanks are still on the platform

•Phillips Petroleum (Conoco Phillips)

•Production started at Ekofisk, from Gulftide

Photo: NOM

Halvorsen Offshore

• Global supplier of Multidiscipline Systems / Packages to the Oil

and Gas Industry

• Deliveries according to NORSOK and ISO

• Production facilities in Norway and Hungary

• Long experience within the Offshore Industry

• Strong HSE focus

Fabrication facility in Kvinesdal

Fabrication facility in Stavanger

• FAT / Inspection

• Commissioning• 60 people

• safety course

Motech fabrication facility in Mosonudvar

Angholmen Offshore Subsea Facilities

20.000 m² production facility area

Halvorsen Offshore - Products

• Waste Heat Recovery Units and Exhaust systems

• Gas Turbine Technology

• Boiler & Steam Systems

• MEG / TEG / Chemical Injection Systems

• Water Treatment Systems

• Separators and Scrubber Systems

• Pig Launchers/ Receivers Systems

• Air Oil Separators

• New generation of Water Wash Systems for Gas Turbines

• New Halvorsen Inlet Cooling System

• Tailor Made Systems

After Marked Services

Multidiscipline Systems / Packages:

Heat and Power GenerationMore power – less emissions

Heat & Power generation, topside

• Gas Turbine Auxilliaries• Gas Turbine Technology

• Thermobolts, Thermopack

• INCO-FLEX Expansion Bellow®

• Waste Heat Recovery Units• HRSG and OTSG• Combined Cycle

• Heat recovery steam generators• Inlet Cooling• Exhaust silencers

More power – less emissions

Waste Heat Recovery Units

• Recovers and regenerates heat

from hot streams

• Transforms the heat into electricity

BENEFITS:

• Decreases the costs of fuel and

energy consumption needed for the

processing

• A dramatically decrease of pollution

• Reduction in auxiliary energy

consumption

Waste Heat Recovery Units and Exhaust system

• Development of new Exhaust Systems

• Modification of existing Exhaust Systems

• Patented solutions

• CFD/FEM analysis

Statoil’s LM Turbine on Veslefrikk B

• delivery in AISI 321

• designed to withstand high

temperatures

• crew of 10 workers has

been sent offshore for 16

days to dismantle the old

duct and install the new

onboard

35 tons exhaust duct on 7 trucks

Inlet Cooling

Benefits

• Increased production in hot areas

• Better performance of the turbine

• A cost-effective, environmental solution for power generation, with low

payback periods and short installation time

• Appropriate for offshore use

• Small instalment

Cools down the air intake for the gas turbine

Boiler & Steam Systems

• Engineering and fabrication in house

• Innovative Solutions

• Complex systems for FPSO, Rig and Platforms

MEG / TEG / Chemical Injection Systems

• Project specific design

• Built according to customer specification

Pig Launchers / Receivers System

• Pig Launchers Systems

• Pig Receivers Systems

Everything is done in-house Halvorsen Offshore

Water Treatment Systems

• Statoil: Troll C platform – NOx reduction project

• Total: Martin Linge platform, one of the most advanced

platforms which will operate in the North Sea – Fresh Water

Generation package with Reverse Osmosis system

Fresh / Process Water Maker, Produced Water Treatment

Troll C platform in North Sea

Photo: Øyvind Hagen/Statoil

NOx reduction project

•Halvorsen Offshore provides complete

solution – idea, engineering, fabrication,

installation, maintenance

•NOx win – win situation•Gothenburg protocol fulfilled

•Operational in the North Sea in 2014

•Pilot project – first installation offshore following

all NORSOK and Statoil’s specifications

Troll C platform - Statoil

• purpose of the system is to reduce the NOx emission from gas turbines to below 25 ppm of NOx by injection of demineralized water into the combustion chamber of the gas-turbine• converts sea water into demineralized water (DW) for injection into the gas turbine• reverse osmosis is used to reduce the conductivity (salt content) from more than 53000 µS/cm to less than 1 µS/cm• material selection:• titanium• superduplex• duplex

Wet low NOx project

NOx project delivery to Troll C

Martin Linge platform - Total

• MARTIN LINGE field in the North West part of the Norwegian

Continental Shelf (NCS) of the North Sea approximately 170 km west

of Bergen

• New platform remotely operated from onshore

• Fresh Water and Potable Water system delivered by Halvorsen

Offshore

• system which will produce, receive, store, treat and distribute fresh

water in the form of potable and service water to all users on the

platform

• field contains some 190 million barrels of oil equivalent (oil and gas)

and first oil is scheduled for the fourth quarter of 2016

Fresh Water Treatment

Separator and Scrubber Systems

• Separators and scrubbers delivered

with proven technology

• High quality products, meeting the highest

specifications

Oseberg A / Statoil – Second stage

suction scrubber

• overall responsibility for

mngm, administration,

coordination and proper

completion of the

equipment and services

defined within technical

requisition

• design, manufacturing,

calculation, certification,

testing, inspection,

mechanical completion,

packing, documentation

and delivery of the new

scrubber

Air Oil Separators

• The most efficient Air Oil Separator on

the market

• Removes up to 99,97 of oil droplets

down to 0,2 microns

• Low pressure drop over separator

• Simple installation

• Preassembled on skid, which can be

tailor made to suit local demands

• Fitted at more than 150 gas turbines

and compressors worldwide

• Factory Acceptance Test (FAT) and

client approval available at Halvorsen

testing facility

PROCESS TOPSIDEFrom well to pipeline with a greener footprint

FOTO: Harald Pettersen, Statoil

Engineering

• Capacity: one third of all our employees are skilled engineers

• 3D modeling in PDMS; GA drawings in Inventor, AutoCAD,

MicroStation, Plant3D

Design tools – 3D modeling

PDMS & Plant3D

Certifications

• Pre-qualified multi discipline supplier to the oil and gas industry • NS-EN ISO 9001 standardization• NS-EN ISO 14001 standardization• DnV: Pressure and temperature systems cl.1 & 2• Registered in Achilles, EqHub, Sellicha, Fpal• Delivers in accordance with: • NORSOK

• PSA

• DNV

• PED

• Lloyds Register

• ISO

Authorized Engineering Workshop

• Authorized NDE organization

• Meet all requirements of EN 473 /NORDTEST

• Certified according to NS-EN 3834-2

• Welding & NDE documentation according to Weld-Eye

• In-house personnel:

o IWE (International Welding Engineer)

o IWS (International Welding Specialist)

o NDE operators level 3 approval

(Non Destructive Examination)

Valgfri slide

Du kan legge denne sliden tidligere i presentasjonen, eller lenger bak.

Som ikke trenger å brukes, men som noen ganger er OK

EPCI & MMO

Maintenance & Modification

Offshore Modification & Maintenance

Rig & Drilling Modifications (EPCIC/Packages)

• Industrial Energy and Processing technology• Renewable energy• Technology development• System packages

Offshore personnel

- Safety course

- Disciplines

- Responsibility

Installation, modification & services

• Recognized experience• Good statistics on safety

Halvorsen Project Management

• Halvorsen Offshore project execution method is based on well-defined project phases (sub) interface and workflows• This ensures optimal management and control, productivity, economy and quality from start to completion• The management system is our tool to ensure implementation and continuous improvement of project management methodology

Feasibility &

Method

definition

Engineering Procurement Construction InstallationComissioning

& Completion

Tender

& Order

handling

Halvorsen Management System

Content:

• HSE Procedures

• QA Procedures

• Environment Procedures

• Organization Plan

• Policy

• HSE Action plan

• Link to our Chemical database

• Link to our incident database - avvik.no

• Link to our occupational health service – LBHT

Safran Planning Tool

PIMS Document Management System

Customer’s Document System

• SAP

• OrderMate

• Navision / Micfosoft Dinamics

• VDBX – Vendor Data Base Exchange

• ProArc

• ProCoSys

• Web-based Document Exchange Platforms

WeldEye Quality System

Fabrication in Kvinesdal

Work in progress

at Halvorsen Offshore

WHAT CAN WE DO FOR

YOU?

Halvorsen Group