MIXER COMPANY

GENERAL BULLETIN 08

NEPTUNE HYDRAULICALLYACTUATED “DIA-PUMPS”

2

EZE-CLEANTM Valves—Cartridges can be removed forcleaning without disturbing thepiping to the pump.

Variable Oil By-pass TM stroke adjustment allows bettervalve performance than variable linkage designs. Thevalve checks have extra time to seat even in heavyliquids since they are idle during the by-pass portionof the discharge stroke.

Standard “dia-Pump”Simplex Only

• Simplex capacities from 1 gph(3.7 lph) to 18 gph (68 lph)

• Pressures to 1100 psi (77 kg/cm2)

Request Bulletin DP-1100

Economy Liquid HeadSimplex Only

• Simplex capacities from 1 gph(3.7 lph) to 18 gph (68 lph)

• Pressures to 1100 psi (77 kg/cm2)

Request Bulletin DP-500E

The Original “dia-Pump”Available Simplex or Duplex

• Simplex capacities from 0.2 gph (0.75 lph) to 80 gph (302 lph)

• Pressures to 3000 psi (210 kg/cm2)

Request Bulletin DP-1100

SERIES 500S/500DSERIES

500ASERIES 500E

Request Bulletin AB for Application Information

Request Bulletin DP-1100

All Neptune “dia-Pumps”are adjustable from 10%through 100% of capacityby micrometer dial.

Neptune “dia-Pumps” areavailable in the followingmaterials of construction:

• Cast Iron with 316SS Trim

• 316SS • PVC

• Alloy 20 • Kynar

316SSshown

316SSshown

PVCshown

SERIES 7000

3

CHEM

ICAL FEED

EQU

IPMEN

T

Special Application Pump,Available Simplex or Duplex,Light Slurries and Viscous Fluids to 5,000 cps

• Simplex capacities from 2 gph(7.5 lph) to 30 gph (114 lph)

• Pressures to 450 psi (32 kg/cm2)

RequestBulletin VP

Special Application Pump,Available Simplex or Duplex,Slurries to 10% and ViscousFluids to 20,000 cps

• Simplex capacities from 2 gph(7.5 lph) to 80 gph (302 lph)

• Pressures to 300 psi (21 kg/cm2)

Request Bulletin TP

SERIES 500V

High Volume, High Pressure, Simplex Only

• Simplex capacities to 240 gph (907 lph)

• Pressures to 4000 psi (276 kg/cm2)Request Bulletin DP-2000

SERIES 600

SERIES 500T

PORTABLE “EZE-GRAB” PLATFORMShown below with Series 500V Pump plusoptional Motor Starter, Cord and Plug

Request Bulletin DP-1100

ELECTRICSTROKECONTROLControls pump capacityautomatically in responseto process signals.

Request Bulletin ESC

DOUBLE DIAPHRAGMLEAK DETECTIONOPTION WITHSENSOR/TRANSMITTERRequest Bulletin DP-1100

316SSshown

316SS shown

PVC shown

316SSshown

Mechanically Actuated Diaphragm Metering Pumps

• Simplex capacities to 300 gph (1135 lph)

• Pressures to 150 psi (10 kg/cm2)Request Bulletin DP-7000

4

PORTABLEMINI-TANK FEEDERS

Withcontainment

Electronic pumps withtank and containment

Motor driven pumps,standard pipingarrangement

Withoutcontainment

PACKAGED CHEMICAL FEED SYSTEMS

Neptune manufacturesstandard chemical feedsystems to 500 gallonswith bottom, top or side-mounted pumps.

Request Bulletin FDP/CFS

Top Mount

Automatically adds glycolsolution to make up forleakage in closed loopwater systems.

GLYCOL FEEDERS

Bottom Mount

Request Bulletin GLY

CONTAINMENT SYSTEMS

OPENCONTAINMENTSYSTEM

Containment systems capture leaks or spills.

NIMBLE SKID FLEXIBLEPUMP PACKAGES

Two, three or four pump units. Corrosion resistant poly

base. Containment available.

Request Bulletin FDP/CFS

Request BulletinFDP/CFS

TwoPumps

BottomMounted

5

BY-PASS FEEDERS BROMINE FEEDERS

ACTIVATED POLYMER SOLUTION

NEAT POLYMER

WATER

Electronic diaphragm metering pumps.Operates on any single phase voltage from94 VAC to 264 VAC. Manual, 4-20 mA or

water meter pulse controlled. Variety of liquid end materials.

Request Bulletin PZ

Liquid polymer blend and feed system dilutes, mixes and thoroughly activates emulsion, dispersion and solution polymers.Request Bulletin PM

Hazardous area models available.Request Bulletin PM-EP

Vertical, to 12 gallons, to 300 psi, 200°F

Request Bulletin BF

1 to 50micron rating

BY-PASS FEEDERWITH CARTRIDGEFILTERType DBFC

FILTERFEEDER WITHFILTER BAGIN BASKETType FTF

15 to 300 lb. capacity, to 230 lb./dayfeed rate, to 150 psi, 150°F

Request Bulletin BRD

SERIES PZ PUMPS POLYMASTERTM

PATENTED GATLIN DISTRIBUTIONHEAD

Degree ofpolymeractivation isnot affected by fluctuatingwater pres-sures or dilu-tion waterratio changes.

Type DBFType VTF

PZ Pump with PVC Liquid Head

PZ Pump with PVDF Liquid Head

PZiG Pump with PVC Liquid Head

6

CUSTOM CHEMICAL FEED SYSTEMS

Designed to meet yourrequirements using your specifications orNeptune’s applicationexpertise.

No one is betterqualified to integratecomponents into asystem than thedesigner andmanufacturer of those components. The system andcomponents are backed by the samemanufacturer’s warranty,hence you receive theconfidence of single-source responsibilitywhen you purchase fromNeptune.

Welded manifolds with tubing connections to pump.

Welded manifolds with flangedconnections to pump.

Pressure gauge with snubber, blockand test valve.

Pulsationdampener withblock valve.

7

STEAM

& W

ATER AN

ALYSIS

STEAM & WATER ANALYSIS SYSTEMS

P.O. Box 576, Lansdale, PA 19446215-699-8700 • FAX: 215-699-8795

Custom designed to your application. Standard designsinclude primary and/or secondary cooling. Front mountedgrab sample sink includes work surface and spill containingdrip lip. Nema 12 electrical enclosure with rear opening dooris standard. Select from our list of recognized standardcomponents and instruments, or indicate your choice.

Gauges andindicatorsprovideinformation for control onthe front of the panel.

Inlet isolation,blowdown andWaters HiDPIIhigh-pressurereducing valvesare located onthe front of the panel.

Chiller integrationinto panel layoutsaves on-siteinstallation costand providesbetter coolingefficiency. Localdisconnectprovides safetyand convenience.

BACK VIEW: Tubing match plate used for panelsshipped in sections and reconnected at the job site.

BACK VIEW

BACK VIEW

Coolerinstallationincludesthrottling,isolation and reliefvalves.

Coolantsight flowindicatoraids indistributionof coolantsupply.

Stainless steelsample coolershell is easilyremoved forcleaning.

FTA bathautomaticwater levelcontrols.

Insulatedstainless steelbath resistscorrosion.

FTA valves provideprecise, independenttemperature control ofindividual sample lines.

Stainless steelheaders forcooling water,drain andrelief.

Non-asbestosinsulation forpersonnelprotection.

SEE PAGE 10 FOR FTA SYSTEM

8

SAMPLE COOLERS

High efficiency, counter-flow sample coolers. Allstainless steel construction. Shell is easily removedfor cleaning in place. Pressure/temperature rating,5000 psi at 1000°F.

Request Bulletin W9150

HIGH PRESSURE REDUCERS

Adjustable pressure reducer is interchangeable with otherbrands. All 316 stainless steel wetted parts. Crank-assistedhandwheel and blow-by step in reduction rod provides easier

clean out and adjustment. Pressure/temperature rating, 5000 psi at 300°F.

Request Bulletin W6501

REFILLABLERESIN COLUMNS

Available in many sizes as directreplacements to more expensivedisposables. Valved quick disconnects available.

Request Bulletin W7901

SPARGERASSEMBLY

Used to prepare asample for taking a degassed cationconductivitymeasurement.Options includeconductivity analyzer and nitrogengenerator.

Request Application Bulletin W7950

P.O. Box 576, Lansdale, PA 19446215-699-8700 • FAX: 215-699-8795

HIGH TEMPSHUT-OFF VALVES

Shuts off sample flow when temperaturegets too hot. Rated for 3000 psi. No resetrequired. All stainless construction.

Request Bulletin W270

SAMPLE CONDITIONING

HIGH TEMPERATURE SAMPLE SHUT-OFF

9

CONDITIONING ASSEMBLIES

MULTI-STREAMSEQUENCERS

GRAB SAMPLESTATIONS

Includes all componentsnecessary for obtaining agrab sample from smallerboilers. Completelyassembled. Saves time oninstallation. Pressure/temperature rating, 1000 psi at 450°F.

Request Bulletin W3000

SAMPLECONDITIONINGMODULES

Single point sample panels canbe easily customized to conditiona wide variety of samples. Avail-able with conductivity, pH orsimilar analyzers. Pressure/temperature rating to 4000 psi at 1000°F.

Request Bulletin W3100

PORTABLE SAMPLERS

Easily moved throughout the plant. Can sample any source from 5000 psi at 1000°F to 2 psia at 250°F. All wetted parts stainless steel or acrylic.

Request Bulletin W3150

Used to share continuous on-line analyzers among multiplesample streams in order to save money and minimize space.Standard model can accommodate up to eight streams.Custom model is used for multiple analyzers and includes colortouch-screen operator station.

Request Bulletin W5000

STANDARD SEQUENCER CUSTOM SEQUENCER

10

FTA RETROFITS

CONDENSER LEAKAGEMONITORING SYSTEMS

COOLING WATERISOLATION SKIDS

Provides independent secondary temperaturecontrol of individual sample lines in a compact,economical package. Local temperatureadjustment and indication provided for eachsample line. All wetted parts stainless steel.Insulated stainless steel bath. Chiller optional.Request Bulletin WFTA

Monitors for condenser tube-sheet leaks when unitis down. Available with many forms of analysis.Positive displacement gear pump maintains primeand provides linear flow.Request Bulletin WCLMS

Allows utilization of high-solidscooling water supplies as primarycooling water source. Ideal for use with surface water or mineralladen well water supplies.Available in single or dual process loop configurations.

Request Bulletin WCWIS

P.O. Box 576, Lansdale, PA 19446215-699-8700 • FAX: 215-699-8795

11

PORTA

BLEM

IXERS

SERIESJGFFlangeMount

DRUM MIXERSeries F Clamp-On (shown),

Series E Screws into2" Bung (not shown), 1/4 to 1 HP, Electric or Air

SERIESJGRAngle RiserMount

SERIESJGClampMount

SERIES BDirect Drive Air or Electric Mixers, 1/20 to 1/2 HP

BULK CONTAINER MIXERS Electric or Air

HEAVY DUTY PORTABLE MIXERS

Request PortableMixer Catalog

1/3 HP to 5 HP, Electric or AirGear Drive (350 RPM) and Direct Drive (1750 RPM)

Neptune mixers mount to any

brand/size IBCs.

MIXER COMPANY

P.O. Box 247 • Lansdale, PA 19446-0247Tel: 215-699-8700 • Fax: 215-699-0370Toll-Free Tel: 1-888-3NEPTUNE (1-888-363-7886)Toll-Free Fax: 1-800-255-4017

SERIES BCDirect Drive 1/2 to 3/4 HP Electric1/2 to 2 HP Air

SERIES BFDirect Drive Flange Mount 1 to 3 HP Air

HGL MixerMounted to Cap with PN #107739Bulkhead Fitting

RGT Mixerwith RGT-BKTMounting Bracket

12© 2008 Neptune Chemical Pump Company All Rights Reserved P/N ZL106107 Printed in U.S.A.

SOLD BY:

PULSATION DAMPENERSPVC, polypropylene, 316SS

and Alloy 20 bodies with Viton or EPDM bladders

Request Bulletin PD

BACK PRESSURE VALVESPVC, 316SS, Kynar and Alloy 20 standard.Available 1⁄2"–11⁄2"

Request Bulletin BP

RELIEF VALVES

PVC, 316SS, Kynar and

Alloy 20 standard.Available 1⁄2"–11⁄2"

Request Bulletin RV

SAMPLECOOLERS316SS and InconelRequest Bulletin SC

316SS

PVC

316SS

PVC

CORPORATION STOPS WITH QUILLSUsed to add chemical injection points to low pressure tanks, mains, cooling towers and process systems without draining.

PVC, Kynar, 316SS and Alloy 20 available.HIGH

PRESSURE INJECTION QUILLSUsed to inject chemicals into the turbulent flow zone of high pressure water or steam lines. PVC, Kynar, 316SSand Alloy 20 available. Request Bulletin CS

QUALITY ACCESSORIES BY NEPTUNE CHEMICAL PUMP COMPANY

CALIBRATION COLUMNSStandard sizes 100, 250, 500, 1,000 and 4,000 ml.

Request Bulletin CC

P.O. Box 247 • Lansdale, PA 19446-0247Tel: 215-699-8700 • Fax: 215-699-0370Toll-Free Tel: 1-888-3NEPTUNE (1-888-363-7886)Toll-Free Fax: 1-800-255-4017Web Site: http://www.neptune1.comE-mail: pump@neptune1.com

316SS

PVC

KYNAR

KYNAR

Request Bulletin CS