garmin nuvi 2565

nüvi® 2565quick start manual

190-01195-26_0A.indd 1 2011/5/24 下午 01:59:55

nüvi 2565 Quick Start Manual 1

Getting Started WARNING

Refer to the Important Safety and Product Information guide available on www.garmin.com for product warnings and other important information.

When using your device for the first time, complete the following tasks.

1. Connect the device to vehicle power (page 1).

2. Mount the device (page 3).3. Register the device (page 4).4. Updating the Software and Maps

(page 4).

Connecting the Device to Vehicle Power

WARNINGThis product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight.

Charge your device before using it on battery power.

1. Fit the bottom of your device into the mount.

2. Tilt your device back until it snaps into place.

190-01195-26_0A.indd 1 2011/5/24 下午 01:59:56

2 nüvi 2565 Quick Start Manual

3. Plug the vehicle power cable ➊

into the mini-USB connector ➋

on the mount.

➊➋

➍

➌

4. Plug the other end of the vehicle power cable into a power outlet in your vehicle.

5. If you are using a traffic receiver, connect the external antenna to the traffic receiver and secure it to the windshield using the suction cups.

6. Video in connector ➌, connecting rear view camera. Driving recorder connector ➍ to connect driving recorder. Rear camera and driving recorder are optional subscriptions.

After the device has been connected to vehicle power, the following occurs.

• The device turns on.• The device acquires satellite

signals. When at least one of the bars is green, your device has

acquired satellite signals.• NOTE: The device may need a

clear view of the sky to acquire satellite signals.

• The device charges as you drive. in the status bar indicates the

190-01195-26_0A.indd 2 2011/5/24 下午 01:59:57


status of the internal battery.

Mounting Your DeviceNOTICE

Before mounting the device, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting.

1. Remove the clear plastic from the suction cup.

2. Clean and dry your windshield and the suction cup with a lint-free cloth.

3. Press the suction cup to the windshield.

4. While pressing, flip the lever back toward the windshield.

5. Snap the mount ➊ onto the suction cup arm ➋.

➊ ➋

Mounting Driving Recorder (Optional)

➊➋

1. Snap driving recorder- GDR 10 to the other arm.

2. Connect GDR 10 transmitter to microUSB port on mount located aside.

190-01195-26_0A.indd 3 2011/5/24 下午 01:59:57


Registering the DeviceGo to www.my.garmin.com for registration

Updating the Software and Maps Go to www.garmin.com.sg for software and map updates

nüMaps GuaranteeYour device is eligible for one free map update within 60 days of acquiring satellites while driving with your nüvi. You are not eligible for the free map update if you register by phone or wait longer than 60 days after the first time you acquire satellites while driving with your nüvi. For more information, go to www.garmin.com/numaps.

Device Overview

➊

➋➌

➊ Power key

➋ microSD™ card slot

➌ External GPS antenna conenctor

Using the Power Key1. Press and quickly release the

Power key to view additional options.

2. Select an option:• To adjust screen brightness,

touch and drag the scroll bar.• To turn off your device, touch

Off. • To reset the device, hold the

Power key for 10 seconds.

190-01195-26_0A.indd 4 2011/5/24 下午 01:59:58


• To exit the menu, press and release the Power key.

About Points of InterestThe detailed maps loaded in your device contain points of interest, such as restaurants, hotels, and auto services.

Finding a Point of Interest by Category1. From the Main menu, touch

Where To? > Points of Interest.2. Select a category.3. If necessary, select a subcategory.4. Select a destination.5. Touch Go!.

Touch > Save on this page to save the location to a Favorites folder on the device. Use the Favorites folder to save the location of your workplace, home, and other common destinations.

6. If necessary, select an option:• Touch Drive to calculate a

route you will navigate by driving.

• Touch Walk to calculate a route you will navigate by walking.

• Touch Public Transit to calculate a route that combines public transit and walking.NOTE: You must have cityXplorer™ maps loaded to navigate using public transit. Go to www.garmin.com to purchase cityXplorer maps.

190-01195-26_0A.indd 5 2011/5/24 下午 01:59:58


Using the Main Menu➊

➋ ➌

➍ ➐ ➑ ➒➎➏• Touch ➊ to select a transportation

mode.• Touch ➋ to find a destination.• Touch ➌ to view the map. • Touch ➍ to stop a route. • Touch ➎ to detour a route.• Touch ➏ to make a call when

connected to a compatible mobile phone. See www.garmin.com/bluetooth for information.

• Touch ➐ to start Voice Command.• Touch ➑ to adjust the volume.• Touch ➒ to open the menu of

tools and settings.

Customise Main Menu Make your own main menu

1. Find the main menu, touch Tools > Settings > Main Menu

2. Select Customize and add any features you like, maximum up to 15 icons.

190-01195-26_0A.indd 6 2011/5/24 下午 01:59:59


3. Touch Save.

Your Route on the MapNOTICE

The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.

Your route is marked with a magenta line on the map. If you depart from the original route, your device

recalculates the route. A speed limit icon could appear as you travel on major roadways.

Using the Map Functions➊ ➋

➌

➍ ➎➏

➓

➐

➑ ➒

• Touch ➊ to view the next turn. If a view of a junction exists, the junction view appears.

• Touch ➋ to view the turn list.• Touch ➌ to zoom in and out. • Touch ➍ to return to the Main

menu.• Touch and hold ➍ from any

screen to return to the Main menu.

190-01195-26_0A.indd 7 2011/5/24 下午 01:59:59


• Touch ➎ to change the data field.

• Touch ➏ to view the Where Am I? page.

• Touch and drag ➐ to view a different area of the map.

• Touch ➑ to view trip information.

• Touch ➒ to change the speed limit if the speed limit shown on the map is incorrect.

• ➓ means current lane info. You will not lose direction, any turn or exist.

Using myTrendsAs you drive with the device on, myTrends™ gathers information that allows the device to predict when you are traveling to a common destination, like your workplace or home. When myTrends is activated, the destination and estimated time of travel will appear in the navigation bar on the map. If a traffic receiver is connected, traffic information may also appear in the navigation bar.

myTrends only works for locations that are saved as Favorites (page 5).

When myTrends information appears in the navigation bar, touch the navigation bar to view route information.

190-01195-26_0A.indd 8 2011/5/24 下午 02:00:00


Avoiding Road Features1. Find the main menu, touch

Tools > Settings > Navigation > Automobile > nuRoute > Avoidances.

2. Select the road features to avoid on your route.

3. Touch Save.

Custom Avoidances 1. Find the main menu, touch Tools

> Car > nuRoute > Custom Avoidances.

2. Select avoid area or avoid road you wish.

3. Touch Save.

Routes Preview Navigate to the destination before travelling and preview 3 routes, select the most suitable route for navigation.

1. Find the main menu, touch Tools > Settings > Navigation > Car > nuRoute > Calculation Mode.

2. If selecting Prompted, GPS will show three different routes for preview before navigation.

3. Touch Save.

190-01195-26_0A.indd 9 2011/5/24 下午 02:00:00


About the Transportation Modes

Automobile mode

Pedestrian mode

Routes are calculated differently based on your transportation mode.

For example, in Automobile mode, the estimated time of arrival is calculated using the speed limit of the roads on the route. Pedestrian mode calculates time of arrival based on walking speed.

Using the On-Screen Keyboard & Handwriting PadWhen an on-screen keyboard appears, touch a letter or number to enter it.

190-01195-26_0A.indd 10 2011/5/24 下午 02:00:00


Touch to add a space. Touch ◄ and ► to move the cursor. Touch to delete a character. Touch and hold

to erase the entire entry. Touch Mode to select the keyboard language mode. nüvi 2565 supports keyboards in English, Japanese, simplified Chinese, and traditional Chinese.

You can also use the on-screen handwriting pad to enter characters in English, simplified Chinese, and traditional Chinese.

About Voice CommandNOTICE

Voice Command supports British English only not supports Bahasa Malay. Some functions may be invalid.

The Voice Command feature allows you to use your device by speaking the words you see on the screen or by speaking certain commands. The Voice Command menu provides a list of available commands to use.

190-01195-26_0A.indd 11 2011/5/24 下午 02:00:00


Activating Voice Command1. Speak Voice Command. The voice command menu

appears.2. Press ASR icon. The voice

command menu appears.

Tips for Using Voice Command

• Talk in a normal voice directed at the device to speak a command exactly as it appears on the screen.

• Respond to voice prompts from the device as needed.

• Speak numbers to enter numbers.

• Speak Exit to exit Voice Command.

Navigating with Voice Command1. Speak your wakeup phrase. The voice command menu

appears.2. Speak Find by Name.3. Listen for the voice prompt and

speak the name of the place. The device repeats the name of the

place as it is searching. A list of locations appears.4. Speak the line number of the

location you want. 5. Speak Yes to navigate to the

location, or speak No to go back to the list of found locations.

190-01195-26_0A.indd 12 2011/5/24 下午 02:00:00


Compass Garmin’s new generation GPS, nüvi 2565 not only provides navigation for drivers but also has a built-in compass to pinpoint direction.

Touch Tool > Compass to start

Enter place or city for your destination. The compass will vary on the move for pinpointing direction.

NOTICEGPS device close to magnet or magnetic items may affect compass accuracy.

The compass indicates final

destination’s direction even from a long distance.

An example below pinpoints Tokyo.

About TrafficNOTICE

Garmin is not responsible for the accuracy or timeliness of the traffic information.

The FM Traffic Message Channel (TMC)

subscription is automatically enabled and does not require an additional subscription purchase to activate. The FM TMC traffic receiver is integrated in the vehicle power cableavailable

190-01195-26_0A.indd 13 2011/5/24 下午 02:00:01


in retail shops. Contact your local distributor for more information.

TMC is only available in Singapore with NAVTEQ Maps

Manually Avoiding Traffic on Your Route1. From the map, touch .2. Touch Traffic On Route. 3. If necessary, touch the arrows to

view other traffic delays on your route.

4. Touch Avoid.

Viewing the Traffic MapThe traffic map shows color-coded traffic flow and delays on nearby roads.

1. From the map, touch .2. Touch Traffic Map to view the

traffic incidents on a map.

Remember Where You Parked Ever feel annoyed can’t find your car in parking lot? Garmin Locate helps you easily find position when removing device from windshield mount.

1. Find main menu > Where To? > Parking

190-01195-26_0A.indd 14 2011/5/24 下午 02:00:01


2. GPS device will show you where you parked

Driving Recorder (Optional Subscsription)Touch Tool > Driving Recorder to start.

Record the traffic or scenery while driving.

➋ ➌ ➍ ➎

➏

➊

1. Touch ➊ to go back to menu page

2. Touch ➋ for Video Quality, Format and Software Update setting.

190-01195-26_0A.indd 15 2011/5/24 下午 02:00:02


System default provides Video Quality setup in High (pixel 1280x720), Medium (pixel 640x480) and Low (pixel 320x240) to choose.

3. Touch ➌ for playback

3-1 CategoryYou can list recorded file by All, Single Date or Protected.

3-2 Delete RecordSelect the file you wish to delete, touch and delete.

3-3 Changing Status from Play and Pause Touch to pause and touch to play.

3-4 Mark and ProtectMark the video while playing, not losing any important section. Marked part will be saved as “protected” to prevent deleting accidently.

190-01195-26_0A.indd 16 2011/5/24 下午 02:00:02


4. Touch ➍ to choose recording voice or means not to record voice; means to record voice.

5. Touch ➎ to save the file and the current recorded file will not be rewritten.

6. When ➏ showing on the screen, represents system starts video recording.

Connect to PCNOTICE

Driving recorder is an optional subscription. When purchasing, package contains a microSD card 8GB with software. Software only supports Windows operating system (Windows XP/ Vista/7)

1. Built in software in microSD card with driving recorder. Open execute file and start. (The Internet connection is recommended. It will be convenient for look up recorded file relative position.)

2. There are three parts in software. Left “file playing”, upper right “map position” and lower right “file information.”

190-01195-26_0A.indd 17 2011/5/24 下午 02:00:02


3. Files can be categorised as all files, date and protected for switching.

4. User can select file be protected or not. Switch to protected and the file will become “read only.” There will be a pop up window as an alert if deleting the file.

5. When previewing video, recorded coordinates and speed info will be shown on map and information window.

190-01195-26_0A.indd 18 2011/5/24 下午 02:00:03


Route in blue on right corner is video recorded route. Marker indicates video current location. User can preview relative position from windows and can select any route on the map to watch recorded video.

Hands-free Features

Pairing Your PhoneHands-free calling is available on some nüvi models. Before you can pair, your phone and the device must be turned on and within 33 ft. (10 m) of each other.

1. Enable the Bluetooth® component on your phone.

2. Touch Tools > Settings > Bluetooth.

3. Touch Bluetooth > Enabled > Save.

4. Touch Add Phone > OK.5. Select your phone, and touch OK.6. Enter the Bluetooth PIN (1234)

for your device in your phone.

190-01195-26_0A.indd 19 2011/5/24 下午 02:00:03


Power CablesYour device can be powered by the following ways:

• Vehicle power cable• USB cable • AC adapter (optional accessory)

Finding More InformationYou can find more information about this product on the Garmin Web site.

• Go to www.garmin.com.sg/products/ontheroad/

• Go to http://buy.garmin.com to purchase accessories.

• Touch Tools > Help.

Contacting Garmin Product SupportGo to http://www.garmin.com.sg/support, or e-mail [email protected], or call Garmin Asia at +886-2-26429199 ext 2

Garmin®, the Garmin logo, and nüvi® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. cityXplorer™, myTrends™, and nüMaps Guarantee™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. Mac® is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. microSD™ is a trademark of SD-3C, LLC.

© 2011 Garmin Ltd. or its subsidiaries

190-01195-26_0A.indd 20 2011/5/24 下午 02:00:04

May 2011 Part Number 190-01195-26 Rev. A Printed in Taiwan

© 2011 Garmin Ltd. or its subsidiaries

Garmin International, Inc.1200 East 151st Street, Olathe, Kansas 66062, USA

Garmin (Europe) Ltd.Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR, UK

Garmin CorporationNo.68, Zhangshu 2nd Rd., Xizhi Dist., New Taipei City 221, Taiwan

www.garmin.com.sgwww.garmin.com.my

190-01195-26_0A.indd 2 2011/5/24 下午 02:00:04

Documents

garmin nuvi 2565