Fo
am
Engineering
Protective PackagingThe vital constituent of protective
packaging is the foam that surrounds and supports the item
requiring protection.
The selection of appropriate foam types and densities is
critical in ensuring the safety of a case contents. Our
capabilities to design, develop and manufacture the most effective
foam support or pack for each individual application involves
processes such as punching, stamping, CNC routing, hand forming and
sculpturing.
Our many years of experience are brought to bear when advising
customers on equipment support, layout and requisite attenuation
against shock, impact and vibration.
Foam Engineering
1
Unit 11, Worton Hall Ind. Est.Worton Road, Isleworth,
MiddlesexTW7 6ER EnglandTel: +44 (0) 20 8568 1881 Fax: +44 (0) 20
8568 1141E-mail – [email protected] – www.cpcases.com
The Information in this brochure is accurate as of time of going
to print. CP Cases reserve the right to make changes without prior
notice due to industry conditions. CP accepts no liability for any
errors found in this document.
Version 1.1 Until 31st December 2009
Whatever your foam packaging requirement, be it military
specifica-tion, commercial protection for an industrial product, or
an enhance-ment to your sales presentation, we can offer choices in
colour, mul-tiple laminations and foam materials, including those
with anti-static, conductive and self-extinguishing properties.
Our foam engineers are specialists and are always on hand to
advise you on foam choices and applications.
LD18 LD33 LD45
Density (Kg/m³) 18 33 45
Working Temperature
-70°C to +95°C
-70°C to +105°C
-70°C to +110°C
50% compression (Kpa) 95 115 135
Shearing stress (N/m) 400 690 1030
Tensile stress (Kpa) 280 455 600
Stretched to breaking point (%)
95 135 150
