FlexFrame Speciw cation Guide - Steelcase · FlexFrame Speciw cation Guide Availability Electronic price list updated with release 190.A (U.S.) and 151.A (Canada), dated April 15,

FlexFrameSpeci cation Guide

AvailabilityElectronic price list updated with release 190.A (U.S.) and 151.A (Canada), dated April 15, 2019.

Spec News is available on village.steelcase.com. Search Steelcase Marketing Resources (Adstock) and download the current release’s Spec News.

Tip: Steelcase Marketing Resources is a new global platform for ordering Steelcase marketing materials that replaces Adstock.

View or download Steelcase Speci cation Guides at https://www.steelcase.com/resources/documents?tax-[doctype]=spec-guide.

Transitional products in this speci cation guide are main-tained for existing customers only and are likely to be phased out over time. These products are indicated with a S. Products that are scheduled to be culled are indi-cated with an G, followed by the last order entry date.

Surface MaterialsThe surface materials team has announced the launch of the Finish Library, found at http:// nishlibrary.steelcase.com.

cFor a list of all trademarks, refer to the last page of this speci cation guide. © 2019 Steelcase Inc.

For Canadian PricingCanadian factor can be found at steelcase.com/CADpricing.Calculate in the following order to avoid rounding errors:• Multiply the base price and each option by the

Canadian factor.• Round each to the nearest dollar.• Add base and options for total list price.

Working With This Speci cation Guide

Ten Tips: How to Get the Most Out of This Book 2

Additional Resources 4

Understanding 5

FlexFrame General Overview 6

Building Wall Requirements and Workwall Weight Capacity 7

Thought Starters and Applications 8

Blending With Other Products 18

Workwall Buildups 20

Workwall Frames 21

Shelves, Bins, and Drawers 29

Skins 37

Electrical 55

Lighting 63

Cantilever Desks and Tables 71

Victor2 79

Specifying 85

Con guration Options For Workwall Perimeter Frames 86

Workwall Perimeter Frames 87

Inner Vertical Frame Pieces 88

Shelves 89

Bins and Drawers 92

Skins 94

Accessories 102

Electrical 103

Lighting 106


Victor2 116

Surface Materials 121

Resources 129

Style Number Index 130

Steelcase April 2019

http://www.steelcase.com/resources/documents?tax-%5bdoctype%5d=spec-guide&tax%5bdoctype%5d=spec-guide

https://www.steelcase.com/canadian-pricing-factor

https://village.steelcase.com

http://www.steelcase.com/resources/documents?tax-%5bdoctype%5d=spec-guide&tax%5bdoctype%5d=spec-guide

19

Pa

ne

ls

Base Junctions

18

Base Junctions

Base junctions completethe structure of panel pack-ages and panel buildups.Answer panels always sharea junction with adjacent pan-els. You order the style ofjunction you need separately .cSpecifying, pages 312–316

Junction cap is includedwith junction when needed.

Opening in top of junctionallows lay-in cable routingbeneath top caps.

Slots in junction accept thepanel’s horizontal bars,cable trays and powerkits.

Slotted channels injunction accommodate work-surface supports and over-head storage components at1" increments.

Trim is included with L, T,V, and end-of-run junctionsto exposed surfaces.Trim is standard with paintand available with fabricwrapped or wood veneeroptions.

Leveling glides adjust toinstall panels on uneven

Range is 2".

Aligners ensure correctwith adjacent panel top caps.

Product Details

End-of-run base junc-tion includes junction, verti-cal trim, and junction cap.End-of-run trim adds 1" tofootprint.

In-line base junctionincludes junction and plastictop cap aligner.

L-base junction includesjunction, vertical trim, junc-tion cap, and plastic top capaligner.

T-base junction includesjunction, vertical trim, junc-tion cap, and two plastic topcap aligners.

X-base junction includesjunction, junction cap, andthree plastic top cap aligners.

V-base junction includesjunction, vertical trim, junc-tion cap, and plastic top capaligner.

Actual DimensionsDepth 3"

(76 mm)

Height 2913 16", 403 4", 531 8", 6531 64", and 7727 32"(757 mm, 1035 mm, 1349 mm, 1663 mm,and 1977 mm)

*Note: Wall start junctions are not available 2913 16"H.

Y-base junction includesjunction, junction cap, andtwo plastic top cap aligners.

Wall start junctionsecures to the stud in astructural wall or drywallfasteners can be used.Vertical trim is not needed.Also used in off-moduleapplications. Wall startjunction does not add anydimension to panel run.

An in-line top capaligner is included within-line junctions.

Top cap aligners areincluded with L, T, V, X,and Y junctions.cPages 313 and 315

Connections

Quick lock on both endsof the panel’s horizontalconnecting bars engage thejunction in a tight structuralconnection.

Base junctions canaccept a stacking junctionof the same type only.Example: An L-base junc-tion will accept an L-stack-ing junction.

Skins extend onto junctionand meet skin of adjacentpanel. The slotted channelof the junction is accessiblebetween these two skins.

Panels can support work-surfaces, shelves, and bins.

Wiring and Cablingin

Horizontal routingthrough junctions is accom-modated by openings formodular harnesses andcables. Openings at top ofjunction accept lay-in cablerouting.

Lay-in junction cablesleeves can be addedin the to cover theexposed metal edges inlay-in cable space.

Modular harnessesthat are 43" or 80" are avail-able to change the height atwhich you are routing powerkits or to route power fromthe panel base to differentheights.

Modular harness is usedto route power through anL, T, V, X, or Y junction.Only the large opening inthe junction at worksurfaceheight allows enough spaceto accommodate the bend inthe harness . Modular har-ness is not needed to routepower at worksurfaceheight.

Large opening at work-surface height in 42"H,54"H, 66"H, and 78"H junc-tions must be used to routepower through an L, T, V,X, or Y base junction. Amodular harness is requiredif power is routed at anylocation other than worksur-face height.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Skins attach to junctionwith concealed hardware.

30"H junction does nothave a large opening. Amodular harness must beused to route power in a30"H L, T, V, X, or Y junc-tion. Only the base of thejunction allows enoughspace to accommodate thebend in the harness.

Surface MaterialsBase junction• Black paintJunction is hidden whenproperly installed.

Vertical trim• Paint (standard)• Fabric (option)• Wood (option only if woodjunction cap is

Application TopicsStacking junctions canbe used with any heightbase junction.

Stability Guidelinesfor application rules.See page 47

Answer Solutions Specification Guide Answer Solutions Specification Guide

.

Ten Tips: How to Get the Most Out of This Book

Tip 4Study the product detail pages in the Understanding section to learn everything an expert knows about specific products. Each product detail page in this section contains the following features, where applicable:• Product Drawing• Actual Dimensions• Product Details• Connections• Wiring and Cabling• Surface Materials• Application Topics

Tip 1

Ch

ap

ter N

am

e

Watch the tabs on the right-hand edges of the pages. They’ll always indi-cate which chapter you are in.

Tip 2

8 Answer Specification Guide

PanelsStatement of Line

Understandingc Page 14

Specifyingc Pages 162–170,

179


Specifyingc Pages 184–185


Specifyingc Pages 171–174

Stacking JunctionsStacking Stacking Stacking L Stacking T Stacking X Stacking V Stacking Y StackingEnd-of-Run In-line Junctions Junctions Junctions Junctions Junctions Wall StartJunctions Junctions Junctions

12"H • • • • • • • •24"H • • • • • • • •

Base JunctionsEnd-of-Run In-line L-Base T-Base X-Base V-Base Y-Base Wall-StartBase Base Junctions Junctions Junctions Junctions Junctions JunctionsJunctions Junctions

30"H • • • • • • •42"H • • • • • • • •54"H • • • • • • • •66"H • • • • • • • •78"H • • • • • • • •

Top cap

Cable tray

Horizontalbars

Basecovers

Base Horizontal Frame Package18"W 24"W 30"W 36"W 42"W 48"W 60"W 72"W

• • • • • • • •

Use the Statement of Line pages for an over view of the available components, their sizes, and page refer-ences for additional infor-mation. Each Under standing chapter includes a statement of line after the table of contents.

Tip 3

Find cross references by looking for page numbers flagged with an arrow.

Product Drawing shows you what the product looks like and points out important features.

Product Details gives specific information on the product and how it is used.

Connections describes how the product is assembled or how it attaches to another product.

Actual Dimensions table lists the dimensions of the product.

Wiring and Cabling details the power and cable-management and cable routing capabilities of the product.

Surface Materials lists what material is used for each part of the product.

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

2 FlexFrame Speci cation Guide


Ten Tips:How to Get the Most

Out of This Book

Tip 6

Italic typeface on speci-fying pages usually identifies wording that you should use in your order.

Tip 7

To determine how manyskins are needed to com-plete a panel, consult thetable at the right.Tip: Remember to orderskins for both sides of thepanel buildup.

Watch for tips throughout the text that give you expla-nations and helpful instructions.

Tip 8

Learn what you cannot do by looking for drawings crossed out with an “X.”

Tip 9Use the surface mate-rials listings in the Surface Materials section of this book to find surface material color numbers.

Tip 10

StyleNumber

TS7042BL

TS7042S

TS7048BL

TS7048S

TS7060BL

TS7060S

TS7072BL

Page

131

130

131

130

131

130

131

Refer to the style num-ber index when you know a style number and you need to find the page that has more details about the product.

Tip 5Refer to the specifying pages for all the information needed to order a product. Each product specifying page contains a variety of elements to help you complete a specification:• Product Drawing• Standard Includes• Required to Specify• Options• Related Products• Specification Information • Dimensions • Style Number • Price

Product Drawingshows you what the product looks like.

Related Productsprovide specification infor-mation for products that are directly related.

Standard Includes(under the red or dark grey band) provides a list of what comes standard with the product.

Required to Specify(under the red or dark grey band) itemizes the informa-tion that you must provide to order the standard product and the preferred sequence for specification.

Specification Information(under the teal or light grey band) provides product dimensions, style numbers, and prices for the standardproduct and any surface material choices that are available.

Options(under the black band) lists all the options that apply to the product, their price, and what is required to specify.

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

··

FlexFrame Speci cation Guide 3



Additional Resources

FlexFrame products are supported with informa-tional materials, tools, and software to help you plan, specify, and order an installation ef ciently.

Many Steelcase wood products are Cradle to CradleTM and/or Indoor AdvantageTM certi ed. FSC CoC Certi cation Steelcase Wood harvesting practices are just one of the steps in achieving Forest Stewardship Council Chain of Custody (FSC CoC) certi cation. FSC certi ed wood (veneer and core) is available on most Steelcase wood products through the Specials RFQ process.

Environmental Steelcase's proprietary Clarity ultraviolet (UV) water-borne nish is unique to the industry. In 2001, with the introduction of our rst water-borne nish, we reduced our Volatile Organic Compounds by an estimated 91%. Since 2007, with virtually no emissions, the Clarity process protects the environment while providing exceptional durability and clarity.

Product brochures and planning tools can be ordered through your Steelcase area of ce by calling 1.800.784.0358 or through the Marketing Resources web site at village.steelcase.com.

Planning Ideas is your resource to help inspire, envision, and plan Steelcase wood solutions. cSee www.steelcase.com, resources, design center, planning ideas.

Wood Solutions Interactive Tool has everything you need to talk about wood solutions com-bined in one interactive tool. www.steelcase.com/woodinteractive

Environmental Brochure Brochure sharing the envi-ronmental story behind Steelcase wood solutions. Includes a timeline of our achievements to date and shares the story behind some of our larger accom-plishments like the rst LEED certi ed facility in the world and the recently planted Steelcase forest. Form number 09-0000201

Product BrochuresSteelcase Inc. Corporate Capabilities BrochureThis publication offers a concise overview of Steelcase including insights into the attitudes and com-mitments that make the corporation unique. In addi-tion, the brochure provides an illustrated listing of all the products and services offered, and international activities are described.Form number 03-0003362

Wood Overview Brochure Overview of the Wood Solutions available from Steelcase. Includes images and high level bullet points on aesthetics, planning, per-formance, and environment.Form number 09-0000206

Wood Solutions Catalog Catalog including Walden, Garland, Elective Elements, Norfolk, and select Wood Seating products. The cata-log provides images, render-ings for each product with speci cations and pricing, and an abbreviated state-ment of line.Form number 09-0000250

Printed MaterialsSurface Materials Reference ManualThis publication provides:• An explanation of the surface materials • "Available on" matrices• Surface material selection listing• Technical data for surface materials• Surface material care and cleaning instructions

Hard Surfaces Card The card provides an over-view of:• Finish levels• An explanation of Flat Cut, Rift Cut and Quarter Cut• Veneer lay-up techniques on exterior surfaces• Wood nishes• Certi cationsForm number 09-0000483

Speci cation GuidesThe following speci cation guides contain products that complement FlexFrame:

Elective Elements Speci cation Guide

c:scape Speci cation Guide

Wood Casegoods and Tables Speci cation Guide

Seating Speci cation Guide

Steelcase Worktools Speci cation Guide

Smart and Connected Speci cation Guide

Computer ToolsElectronic CatalogAccurate sales quotations and purchase orders for Steelcase products are created with speci cation software that uses Steelcase Electronic Catalog data. Use the data to specify and price style numbers and options for every Steelcase product. The data is updated bimonthly by Steelcase and provided to software programs including: the Hedberg Business System, SmartTools — Steelcase's design and speci cation software (for more informa-tion on SmartTools, please email [email protected]), the ProjectMatrix ProjectSymbols libraries, as well as 20-20 CAP Studio.

Furniture Symbol Graphic DataSteelcase creates 2D and 3D furniture symbols (with attributes) for planning and initially specifying Steelcase products. This data is incor-porated into several add-on software packages that work in either a Microstation or an AutoCAD drafting environment.

Instructions for plan-ning with FlexFrame using AutoCAD are available on village.steelcase.com.

Digital PublicationsYou can access these dig-ital publications at www.steelcase.com or village.steelcase.com.

SupportSteelcase CapabilitiesSteelcase products are distributed, installed, and serviced through a network of more than 600 dealers worldwide. Steelcase is also represented with of ces and corporate showrooms in 26 U.S. cities, 4 Canadian cities, and in France, Germany, Great Britain, and Japan. Every Steelcase product meets our exception-ally high standards of quality and durability and comes with the Steelcase assurance of excellence in service.

For ordering or prod-uct assistance, please call your local dealer, the Steelcase Solutions Resource Team, or the Steelcase Solutions Ful llment Team at 1.888.STEELCASE (1.888.783.3522) or send an e-mail to [email protected].

Call the Steelcase Solutions Resource Team prior to placing an order, when working on a bid, or when you need information about product applications and speci cations.

Call the Steelcase Solutions Ful llment Team if you have submitted an order to Steelcase and you need to speak to your Solutions Ful llment Team Representative about the order. Also call if you have any post-shipment quality concerns or service parts questions.

For warranty information, please go to http://www.steelcase.com/warranty/.

Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call 1.616.247.2500.

For information about Steelcase, the name of your nearest Steelcase dealer,or for product literature, call 1.800.333.9939 or visit ourWeb site: www.steelcase.com.

Related Products

Steelcase worktools include a full line of ergo-nomically designed products that enhances and improves the work setting. cFor additional information, refer to Steelcase Worktools Speci cation Guide or contact Steelcase at 1.888.STEELCASE (1.888.783.3522) or send an email to [email protected].

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................




https://www.steelcase.com




Fle

xF

ram

e

UnderstandingFlexFrame

Application Topics

FlexFrame General Overview 6

Building Wall Requirements and Workwall Weight Capacity 7

Thought Starters and Applications 8

Blending With Other Products 18

Workwall Buildups 20

Product Details

Workwall Frames 21


Skins 37

Electrical 55

Lighting 63


Victor2 79



FlexFrame

FlexFrame General Overview

FlexFrame is a wall mounted, frame based, recon gurable system of storage, skins, and technology components.

FlexFrame workwalls maximize storage, make information accessible, and connect people with technology.

FlexFrame workwalls are designed to blend with a variety of product lines to create complete applications.

FlexFrame workwalls create high performance private of ces, collabora-tive spaces, project rooms, media walls, and more.

FlexFrame workwalls are designed to be applied with or without skins.

Frames come in a variety of heights and widths and can be divided into 24", 30", and 36"W sections.

Skins are available in wood, Low-Pressure Laminate, fabric, and glass.

FlexFrame workwalls integrate technology with wire management, power and data distribution, and attachment of monitors.

Shelves, bins, and drawers are available in wood and Low-Pressure Laminate.

................................................................................................................................................

................................................................................................................................................



Fle

xF

ram

e

Building Wall RequirementsStructuralWhen mounting workwall frames to hollow wall construction the following conditions must be met:• Drywall must be at least 5/8" thick and attached securely to studs with screws• Studs must be at least 26 gauge or thicker for metal• Studs must be spaced 24" on center maximum

Secure workwall frame directly to wall using customer supplied 1/4" diameter Toggler brand (or equivalent) hollow wall fasteners with bolts per manufacturer’s recommendations.

Building walls require additional reinforcement when a 225/8" workwall frame is used to support:• Bins• 19"D double shelves• More than one 19"D single shelf in any section• One 19"D single shelf and two 123/4"D shelves in any section

FlexFrame workwalls cannot attach to Privacy Wall.

FlatnessWorkwalls look and work best when attached to building walls that are at and plumb. Workwall frames except, 225/8"H frames, can be adjusted up to maximum of 5/8" to accommodate wall conditions. When adjusted away from building wall, the wall attachment strip will be visible between the building wall and the back edge of the vertical frame pieces, and a space will be present between the horizontal frame pieces and the building wall.

Other Building Wall ConsiderationsConsider the location of moldings, HVAC, electrical outlets, switches, and other building features when planning workwall locations.

Workwall Weight CapacityShelves and bins can hold up to 200 pounds each.

When all building wall requirements above are met, maximum weight capacity per section is as follows:• 225/8"H workwall — 300 pounds per section• 4715/16"H workwall — 450 pounds per section• 647/16"H workwall — 600 pounds per section• 8015/16"H workwall — 700 pounds per section

A structural or building engineer should be consulted when approaching any of the upper limits outlined above or when attaching a workwall to a building wall of a construction type other than hollow wall construction.

FlexFrame

Building Wall Requirements and Workwall Weight Capacity

5/8" max

Building Wall

Building Wall

5/8" max

CAUTION! Adequate wall construction is required to support the weight of the loaded Workwall.

Building Wall Requirements and

Workwall Weight Capacity

................................................................................................................................................

................................................................................................................................................


FlexFrame

Thought Starters and Applications


647/16"H workwall with tackable fabric skins and a mix of open and closed storage is ideal for project rooms and team spaces.

Workwall Storage With Skins................................................................................................................................................

................................................................................................................................................


FlexFrame

FlexFrame Speci cation Guide cThought Starters and Applications, continued 9

Fle

xF

ram

e


Workwall Storage With SkinsRecommended Components

Quantity Style Number Description

1 1 FFPF6472 Workwall Perimeter Frame — 647/16"H x 727/8"W

2 1 FFVF63 Workwall Inner Vertical Frame Piece — 637/16"H

3 2 FFAT35 Top Cap — 351/16"W

4 2 FFSH193516B Wood Bin — 19"D x 351/16"W x 161/2"H

5 2 FFKB3414 Wood Skin for Bin — 3411/16"W x 14"H

6 2 FFSH193516U Wood Single Upper Shelf — 19"D x 351/16"W x 161/2"H

7 2 FFKS3415 Wood Skin for Single Upper Shelf — 19"D x 3411/16"W x 151/4"H

8 2 FFKK358 Fabric Skin — 351/16"W x 81/4"H

9 2 FFKK3516 Fabric Skin — 351/16"W x 161/2"H

9

8

6

7

2

5

1

3

4

................................................................................................................................................

................................................................................................................................................



Workwall Storage Without Skins

FlexFrame

Thought Starters and Applications, continued

8015/16"H workwall without skins maximizes storage space for binders, paper, boxes, and other objects.

................................................................................................................................................

................................................................................................................................................


FlexFrame


Fle

xF

ram

e

Workwall Storage Without SkinsRecommended Components




3 3 FFSH192916W Lower Single Shelf — 19"D x 291/16"W x 161/2"H

4 3 FFSH19298W Lower Single Shelf — 19"D x 291/16"W x 81/4"H

5 3 FFSH192916B Bin — 19"D x 291/16"W x 161/2"H

6 3 FFSH192916U Upper Single Shelf — 19"D x 291/16"W x 161/2"H

7 3 FFSH122916U Upper Single Shelf — 123/4"D x 291/16"W x 161/2"H

7

6

5

4

3

2

1


................................................................................................................................................

................................................................................................................................................


FlexFrame



Workwall Open Shelves

225/8"H workwall provides piling and display space.

................................................................................................................................................

................................................................................................................................................


FlexFrame


Fle

xF

ram

e


Workwall Open ShelvesRecommended Components




3 3 FFSH12358C Double Shelf — 123/4"D x 351/16"W x 81/4"H


5 3 FFKS347 Skin for Upper Single Shelf — 3411/16"W x 7"H

6 3 FFKD345 Skin for Double Shelf — 3411/16"W x 53/4"H

6

5

4

3

2

1

................................................................................................................................................

................................................................................................................................................


FlexFrame


Workwall Media Wall


4715/16"H workwall integrates technology for informal collaborative spaces.

................................................................................................................................................

................................................................................................................................................


Workwall Media WallRecommended Components


1 1 FFPF4790 Workwall Perimeter Frame Assembly — 4715/16"H x 907/8"W


3 3 FFSH19298D Drawer — 19"D x 291/16"W x 81/4"H


5 4 FFKS287 Wood Skin for 81/4"H Single Shelf — 2811/16"W x 7"H

6 2 FFAT29 Top Cap — 291/16"W

7 1 FFKT2933S Fabric Skin Pair For TV Attachment, Spanning Application—291/16"W x 33"H

3

2

7

6

1

5

4


FlexFrameF

lex

Fra

me


................................................................................................................................................

................................................................................................................................................


FlexFrame



Workwall Conference Space

647/16"H workwall provides technology support, storage, and display for conference rooms.

................................................................................................................................................

................................................................................................................................................


................................................................................................................................................

FlexFrame


Fle

xF

ram

e


Workwall Conference SpaceRecommended Components




3 4 FFSH193516B Bin — 19"D x 351/16"W x 161/2"H

4 4 FFSH19358U Single Upper Shelf — 19"D x 351/16"W x 81/4"H

5 4 FFKS347 Wood Skin for 81/4"H Single Shelf — 3411/16"W x 7"H

6 2 FFSH193516U Single Upper Shelf — 19"D x 351/16"W x 161/2"H

7 2 FFKS3415 Wood Skin for 161/2"H Upper Shelf — 19"D x 351/16"W x 161/2"H

8 4 FFAT35 Top Cap — 351/16"W

9 4 FFKK358 Wood Skin — 351 16"W x 81 4"H

0 1 FFKT3533S Fabric Skin Pair For TV Attachment, Spanning Application — 351/16"W x 33"H

0

6

9

8

7

4

3

2

5

1

................................................................................................................................................


FlexFrame

Blending With Other Products


Height AlignmentWorkwall frames can be mounted at any height on a wall. The top of the frame can be positioned to align with freestanding storage. For example a 647/16"H workwall mounted 13/16" off the oor will align with 655/8"H Elective Elements storage.

Elective Elements Storage and FlexFrame

13/16"

771/2"

655/8"

29"23"17"

Towers Storage FlexFrame

13/16"

771/2"

655/8"

29"23"17"

Towers Storage FlexFrame

Center to Center PlanningWorkwall frames plan on a 6" module measured from center of vertical to center of vertical.

Perimeter frames are 7/8" wider than nominal. When placing components of the same nominal width in front of the workwall, a space may result on either side.

607/8"

30"

60"

................................................................................................................................................

................................................................................................................................................


FlexFrame


Blending With Other Products

Fle

xF

ram

e

Wire ManagementIf freestanding storage is placed in front of a workwall with skins, the skins directly behind the storage may be omitted to allow for wire management.

................................................................................................................................................

................................................................................................................................................



FlexFrame

Workwall Buildups

Order workwall and components separately to create unique con gurations.Tip: Instructions for planning with FlexFrame using AutoCAD are available on village.steelcase.com.

1. Begin by selecting the workwall perimeter frame. Next, select the con guration option which will determine the number of sections and the width of each section. The sections can be placed in any order left to right. Tip: The workwall can be recon gured into different sections at a later date. Additional parts may be required.

2. Order inner vertical frame pieces to separate the sections.

3. Order skins, shelves, bins, or drawers for each section.

4. Specify power if needed.

................................................................................................................................................

................................................................................................................................................




Wo

rkw

all

UnderstandingWorkwall Frames

Statement of Line 22




225/8"H

4715/16"H647/16"H

8015/16"H

FlexFrame

Statement of Line


Perimeter Frame Assemblies 225 8"H 4715 16"H 647 16"H 8015 16"H

247 8"W • • • •307 8"W • • • •367 8"W • • • •487 8"W • • • •547 8"W • • • •607 8"W • • • •667 8"W • • • •727 8"W • • • •787 8"W • • • •847 8"W • • • •907 8"W • • • •967 8"W • • • •1027 8"W • • • •1087 8"W • • • •1147 8"W • • • •1207 8"W • • • •1267 8"W • • • •1327 8"W • • • •1387 8"W • • • •1447 8"W • • • •

Understandingc Page 24 Specifyingc Page 87


FlexFrame


Se

ctio

n N

am

e

Statement of Line

219/16"H

4615/16"H637/16"H

7915/16"H

Wo

rkw

all

Inner Vertical Frame Pieces 219 16"H 4615 16"H 637 16"H 7915 16"H

7 8"W • • • •



................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame

Workwall Perimeter Frames

Actual DimensionsDepth 31 8"

Width 247 8", 307 8", 367 8", 487 8", 547 8", 607 8", 667 8", 727 8", 787 8", 847 8", 907 8", 967 8", 1027 8", 1087 8", 1147 8", 1207 8", 1267 8", 1327 8", 1387 8", or 1447 8"

Height 225 8", 4715 16", 647 16", or 8015 16"


Workwalls are always wall mounted.

Horizontal and vertical frame pieces create the outside perimeter of work-wall perimeter frames.

Corner brackets connect horizontal and vertical frame pieces.

Spacer brackets ensure accurate spacing of vertical frame pieces.

Inner vertical frame pieces are speci ed sepa-rately. They must be added to the workwall perimeter frame to divide the frame into sections.

Product Details24"W to 144"W

225/8"H to 8015/16"H

Workwall perimeter frames are available in widths from 24" to 144" and four heights from 225 8" to 8015 16". Frames can be divided into 24", 30", and 36" sections.Tip: The 24", 30", and 36"W frames do not require an inner vertical frame piece.

607/8"

30"

60"

Overall width of work-wall perimeter frame is greater than nominal. Nominal width dimensions are calculated from center of outer vertical to center of outer vertical.

Workwall perimeter frame consists of left and right outside vertical frame pieces, top and bottom hor-izontal frame pieces, corner brackets, spacer brackets, and wall attachment strips.

Workwalls are assembled in the eld.

Workwall can accept shelves, bins, drawers, and skins in a variety of combinations.

Workwall perimeter frames de ne the outside dimensions of a workwall. They can be divided into multiple sections using inner vertical frame pieces, speci-ed separately.

cSpecifying, page 87


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame



Wo

rkw

all

25/8"

31/8"

29/16"

29/16"There will always be a space between the top of the uppermost compo-nent and the frame and the bottom of the lowest com-ponent and the frame. For a 225 8"H frame the space is 29 16" at the top and bottom. For 4715 16", 647 16", and 8015 16"H frames the space at the top is 25 8" and the space at the bottom is 31 8".

Workwall components allow for segmentation on a 81 4" vertical module. Each height workwall frame can hold a speci c combination of components. For more detail refer to Shelves, Bins, Drawers, and Skins Arrangements on page 50.

Workwall can be used without skins.Tip: If skins are not speci-ed, use wire management

cut-out covers if wire routing is needed.

Workwall frames are always wall-mounted. For speci c requirements see Building Wall Requirements on page 7.

Section con guration is determined during speci -cation of workwall perimeter frames. The speci cation determines the number of sections and the width of each section. The actual order of the sections from left to right is determined in the eld.

Section widths are mea-sured from center of vertical to center of vertical.

Inner vertical frame pieces are ordered separately depending on how many sections are selected when specifying the workwall perimeter frame. Additional inner vertical frame pieces can be ordered later to recon gure.

Inner vertical frame pieces are available in four heights to coincide with the four heights of workwall perimeter frames.

Application Topics

A 647 16"H workwall mounted 13 16" off the oor will align with 655 8"H

Elective Elements storage.

13/16"

The maximum length of workwall is 144". Multiple workwalls can be placed side by side. A 13 16" space is recommended between the two frames to facilitate installation.Tip: Overall width of perim-eter frame is greater than nominal. Width dimension is center of outer vertical to center of outer vertical.

PlanningInstructions for plan-ning with FlexFrame using AutoCAD are available on village.steelcase.com.

Surface MaterialsFrame• 8043 Clear Anodized

Aluminum

Corner Bracket• 4799 Platinum Metallic

Threaded Strip• Black

Basemolding

Base moldings should be considered when locat-ing the workwall perimeter frame. Moldings can be removed, trimmed to t around the workwall, or the workwall can be mounted above the base molding.Tip: If mounted above base molding misalignment with freestanding furniture may occur.

A threaded strip comes installed in each vertical frame piece and has holes along its entire length to attach components. The threaded strip can be adjusted to level shelves. Outside vertical frame pieces have the threaded strip on the inside only.

13/16"

13/16"

13/16"

Clearance of at least 13 16" is recommended between workwall frames and oors, walls, and ceilings.

ConnectionsVertical frame pieces attach to the building wall and carry the structural load of the workwall. Horizontal frame pieces attach to the vertical frame pieces and do not mechanically attach to the building wall.

T-bracketT-shaped wall brackets attach to the building wall using customer installer supplied fasteners.

Workwall frame verti-cals attach to T-shaped wall brackets using supplied set screws. The top most screw will go through a slot in the T-shaped wall bracket to serve as a safety catch.

225/8" 4715/16" 647/16" 8015/16"Four set screws are vis-ible on both sides of every workwall frame vertical.Tip: Set screws may be concealed on inside edge of frame vertical by workwall components.



................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame

Inner Vertical Frame Pieces


Actual DimensionsDepth 31 8"

Width 7 8"

Height 219 16", 4615 16", 637 16", or 7915 16"

Product Details

Inner vertical frame pieces are available in four heights to coincide with the four heights of workwall perimeter frames.Tip: The 24", 30", and 36"W frames do not require inner vertical frame pieces.

An inner vertical frame piece must be added at each location where sec-tions occur.Tip: Sections are decided when specifying workwall perimeter frames.

Spacer brackets ship with the workwall perimeter frame to assure accurate spacing between inner verti-cal frame pieces.Tip: The number and width of spacer brackets is depen-dent on section con guration speci ed on the workwall perimeter frame.

Inner vertical frame pieces have threaded strips on both sides to allow installation of shelves, bins, drawers, and skins.

Wire management cut-out allows cords and cables to be routed between sections.

Inner vertical frame pieces, ordered separately, must be added to the workwall perimeter frame to divide it into sections.�cSpecifying, page 88


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame



Surface MaterialsInner Vertical Frame Piece• 8043 Clear Anodized Aluminum

Threaded Strip• Black

Threaded strips can be adjusted to level shelves, bins, drawers, and skins.

Connections

T-bracketT-shaped wall brackets attach to the building wall using customer installer supplied fasteners.

Workwall frame verti-cals attach to T-shaped wall brackets using supplied set screws. The top most screw will go through a slot in the T-shaped wall bracket to serve as a safety catch.

225/8" 4715/16" 647/16" 8015/16" Four set screws are vis-ible on both sides of every workwall frame vertical.Tip: Set screws may be concealed on inside edge of frame vertical by workwall components.

Wiring and Cabling

13/4"

15/16"

Inner vertical frame pieces used with 4715 16", 647 16", or 8015 16"H workwall frames come standard with a cut-out for wire manage-ment near the bottom of the vertical frame piece.

5/8"

1"

Inner vertical frame pieces used with 225 8"H workwall frames have a smaller cut-out designed to manage LED light cords and not power cords.

Wo

rkw

all





Sh

elve

s, Bin

s, an

d

Dra

we

rs

UnderstandingShelves, Bins, and Drawers



Application Topics

Storage Capacities 35

Shelves, Bins, Drawers, and Skins Arrangements 50

Removable Skins and Access to Electrical Connections 52


FlexFrame

Statement of Line


161/2"H Double Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

81/4"H Double Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

161/2"H Lower Single Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

81/4"H Lower Single Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

161/2"H Upper Single Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

81/4"H Upper Single Shelves 231/16"W 291/16"W 351/16"W

123/4"D • • •19"D • • •

123/4"D 19"D123/4"D 19"D

123/4"D 19"D123/4"D 19"D

123/4"D 19"D 123/4"D 19"D








FlexFrame


Se

ctio

n N

am

e

Statement of Line

81/4"H Drawers 231/16"W 291/16"W 351/16"W

19"D • • •

161/2"H Bins 231/16"W 291/16"W 351/16"W

19"D • • •

231/16"W 291/16"W 351/16"W

231/16"W 291/16"W 351/16"W

Sh

elve

s, Bin

s, an

d

Dra

we

rs




FlexFrame

Shelves, Bins, and Drawers


Double Shelves

Upper Single Shelves

Lower Single Shelves

Drawer Bin

Shelves, bins, and drawers are available in Low-Pressure Laminate or wood.

Shelves, bins, and drawers have an optional wire management cut-out.

Actual Dimensions Double Shelf Single Shelf- Bin Drawer Lower or Upper

Depth 123 4" or 19" 123 4" or 19" 19" 19"

Width 231 16", 291 16", 231 16", 291 16", 231 16", 291 16", 231 16", 291 16", or 351 16" or 351 16" or 351 16" or 351 16"

Height 81 4" or 161 2" 81 4" or 161 2" 161 2" 81 4"

Painted metal blades are standard on each side of shelves, bins, and drawers.

Bin doors recess into the case when opened.

Product DetailsShelves, bins, and drawers are available in Low-Pressure Laminate or wood.

A painted metal blade on each side is standard on all shelves, bins, and drawers to create a consis-tent aesthetic with skins.

Bins and drawers come standard with a ush pull.

Shelves, bins, and drawers come standard with a wire management cut-out to route cords and cables. An option of no cut-out is available. The cut-out is not nished. An optional wire cut-out cover is available.Tip: Double shelves, bins, and drawers have two wire cut-outs, one on the top and one on the bottom of the unit.

Shelves, bins, and drawers are available in a variety of sizes and con gu-rations to provide storage.cSpecifying, pages 89–92

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

FlexFrame Speci cation Guide cShelves, Bins, and Drawers, continued 33

Shelves, Bins, and Drawers

Sh

elve

s, Bin

s, an

d

Dra

we

rs

Drawers come standard with two adjustable dividers that run the depth of the drawer.

Drawers are wood con-struction and feature dove-tail joinery.

Drawers have full exten-sion drawer slides.

LED lights are available as an option on shelves, bins, and drawers. On double shelves lights are available on one or both shelves.

The LED lights are ush mounted on the underside of the shelves, bins, or drawers.

Lights ship installed in the shelves, bins, or drawers.

A light kit must be speci- ed with ordering LED lights. See Determining LED Light Wattage chart to determine the light kit needed, on page 68.

When skins are used the wire management cut-out will be concealed, but still usable for vertical routing cables behind skins.

A space will always be present when shelves are in adjacent sections.

Shelves, bins, and drawers are available as single lower, single upper, and double.

Shelves are 11/8" thick.

Back edge of shelves is un nished.

Shelves, bins, and drawers ship knocked down and are assembled at installation.

Bins and drawers do not lock.

Sides of the bin and drawers are metal and n-ish must be speci ed.

Bin doors recess into the case when opened.

Bin doors have a soft close mechanism.

Do not stack shelves on top of each other so shelves are touching.

Place shelves consistently on adjacent sections of the workwall to prevent mis-alignment across sections.

Bins placed directly on top of each other will create a stacking appearance.

Shelves, bins, and drawers can be arranged to create a continuous vertical strip of painted metal blades.

Shelves, bins, and drawers can be arranged to allow the frame verticals to be visible between components.

45/16"Floor

The component installed at the bottom most position will have a minimum 45/16" space between the bottom of the unit and the oor when the frame is installed 13/16" from the oor.

Application Topics

With skins

Without skinsShelves, bins, and drawers can be applied with or without skins.

If a single shelf is speci ed without skins, two fasteners will be visible on each blade.

153/8"

141/4"

The opening height of a double shelf is slightly smaller than the opening of a single shelf placed above or below another shelf.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Shelves, Bins, and Drawers, continued


Wiring and Cabling

3/4"

Wire management cut-outs allow cord heads and connectors to pass through. A 3/4" space between back edge of shelf, bin, or drawer allows for cable and cord passage.

Skins are aligned at the front of the frame allowing 21/2" behind the skin for rout-ing of cables. This will con-ceal the wire management cut-out. The wire manage-ment cut-out is still usable for vertical routing of cables and cords behind the skins.

A wire cut-out cover lls the wire management cut-out.

When skins are used the wire management cut-out will be concealed but still usable.Tip: Wire cut-out cover is not needed when skins conceal wire management cut-out.

A drawer can be placed directly above another drawer.

Connections

Shelves, bins, and drawers attach to metal brackets through the bottom of the unit using four screws. The screws will be visible when the shelf, bin, or drawer is above eye level.

Shelves, bins, and drawers attach to the workwall frame securely and cannot be dislodged.

Shelves, bins, and drawers can be recon g-ured with simple tools. The recon guration can be done without damaging the shelf, bin, drawer, frame, or wall.

Surface MaterialsShelves, Bins, and Drawers• Low-Pressure Laminate• Wood

Blades• Paint

Flush Pulls• 4799 Platinum Metallic• 7207 Textured Black• 7241 Textured Arctic White• 7246 Midnight Metallic

Contemporary, Bar, or Handle Pulls• 0835 Black• 9201 Polished Chrome• 9211 Nickel• 9212 Silver

Jazz Pulls• 0835 Black• 4799 Platinum Metallic• 9201 Polished Chrome• 9211 Nickel• 9212 Silver

Nile Pulls• 0835 Black• 4799 Platinum Metallic• 9201 Polished Chrome• 9211 Nickel

Wire Cut-out Cover• Paint

Tip: Grain direction on wood bin and drawer fronts is available horizontally or vertically. Grain direction on directional laminate fronts runs vertically.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Storage Capacities

FlexFrame Speci cation Guide cStorage Capacities, continued 35

Storage Capacities

Sh

elve

s, Bin

s, an

d

Dra

we

rs

Shelves — With and Without Skins

Double Shelf Size Inside Dimensions Without Skin With Skin D W H D W H D W H

123/4" 231/16" 81/4" 123/4" 23" 6" 93/4" 23" 6"

123/4" 291/16" 81/4" 123/4" 29" 6" 93/4" 29" 6"

123/4" 351/16" 81/4" 123/4" 35" 6" 93/4" 35" 6"

123/4" 231/16" 161/2" 123/4" 23" 141/4" 93/4" 23" 141/4"

123/4" 291/16" 161/2" 123/4" 29" 141/4" 93/4" 29" 141/4"

123/4" 351/16" 161/2" 123/4" 35" 141/4" 93/4" 35" 141/4"

19" 231/16" 81/4" 19" 23" 6" 16" 23" 6"

19" 291/16" 81/4" 19" 29" 6" 16" 29" 6"

19" 351/16" 81/4" 19" 35" 6" 16" 35" 6"

19" 231/16" 161/2" 19" 23" 141/4" 16" 23" 141/4"

19" 291/16" 161/2" 19" 29" 141/4" 16" 29" 141/4"

19" 351/16" 161/2" 19" 35" 141/4" 16" 35" 141/4"

Single Shelf — Upper Size Inside Dimensions Without Skin With Skin D W H D W H D W H

123/4" 231/16" 81/4" 123/4" 23" N.A. 93/4" 23" N.A.

123/4" 291/16" 81/4" 123/4" 29" N.A. 93/4" 29" N.A.

123/4" 351/16" 81/4" 123/4" 35" N.A. 93/4" 35" N.A.

123/4" 231/16" 161/2" 123/4" 23" N.A. 93/4" 23" N.A.

123/4" 291/16" 161/2" 123/4" 29" N.A. 93/4" 29" N.A.

123/4" 351/16" 161/2" 123/4" 35" N.A. 93/4" 35" N.A.

19" 231/16" 81/4" 19" 23" N.A. 16" 23" N.A.

19" 291/16" 81/4" 19" 29" N.A. 16" 29" N.A.

19" 351/16" 81/4" 19" 35" N.A. 16" 35" N.A.

19" 231/16" 161/2" 19" 23" N.A. 16" 23" N.A.

19" 291/16" 161/2" 19" 29" N.A. 16" 29" N.A.

19" 351/16" 161/2" 19" 35" N.A. 16" 35" N.A.

................................................................................................................................................

................................................................................................................................................


Shelves — With and Without Skins, continued

Single Shelf — Lower Size Inside Dimensions Without Skin With Skin D W H D W H D W H

123/4" 231/16" 81/4" 123/4" 23" 71/8" 93/4" 23" 71/8"

123/4" 291/16" 81/4" 123/4" 29" 71/8" 93/4" 29" 71/8"

123/4" 351/16" 81/4" 123/4" 35" 71/8" 93/4" 35" 71/8"

123/4" 231/16" 161/2" 123/4" 23" 153/8" 93/4" 23" 153/8"

123/4" 291/16" 161/2" 123/4" 29" 153/8" 93/4" 29" 153/8"

123/4" 351/16" 161/2" 123/4" 35" 153/8" 93/4" 35" 153/8"

19" 231/16" 81/4" 19" 23" 71/8" 16" 23" 71/8"

19" 291/16" 81/4" 19" 29" 71/8" 16" 29" 71/8"

19" 351/16" 81/4" 19" 35" 71/8" 16" 23" 71/8"

19" 231/16" 161/2" 19" 23" 153/8" 16" 23" 153/8"

19" 291/16" 161/2" 19" 29" 153/8" 16" 29" 153/8"

19" 351/16" 161/2" 19" 35" 153/8" 16" 35" 153/8"

Bins and Drawers

Bin Size Inside Dimensions Without Skin With Skin With Cable Management Skin D W H D W H D W H D W H

19" 231/16" 161/2" 173/4" 223/4" 12" 153/4" 223/4" 12" 143/4" 223/4" 12"

19" 291/16" 161/2" 173/4" 283/4" 12" 153/4" 283/4" 12" 143/4" 283/4" 12"

19" 351/16" 161/2" 173/4" 343/4" 12" 153/4" 343/4" 12" 143/4" 343/4" 12"

Drawer Size Inside Dimensions D W H D W H

19" 231/16" 81/4" 12" 201/4" 31/4"

19" 291/16" 81/4" 12" 261/4" 31/4"

19" 351/16" 81/4" 12" 321/4" 31/4"


FlexFrame

Storage Capacities, continued

................................................................................................................................................

................................................................................................................................................



Sk

ins

UnderstandingSkins


Skins 40

Worksurface Attachment Skins 44

Cantilever Desk and Table Attachment Skins 46

Application Topics

Shrouds For Skins and Shroud Monitor Relationships 48

Shelves, Bins, Drawers, and Skins Arrangements 50

Removable Skins and Access to Electrical Connections 52


FlexFrame

Statement of Line


Skins 231 16"W 291 16"W 351 16"W

81 4"H

161 2"H

33"H

491 2"H

= Skin = Technology Skin = Cable Management Skin

Skins for Double Shelves 2211 16"W 2811 16"W 3411 16"W

53 4"H

14"H


Skins for Single Shelves 2211 16"W 2811 16"W 3411 16"W

7"H

151 4"H


Skins for Bins 2211 16"W 2811 16"W 3411 16"W

14"H

= Skin = Cable Management Skin

TV Attachment Skin — Centered Application 231 16"W 291 16"W 351 16"W

33"H

TV Attachment Skin, Pair — Spanning Application 231 16"W 291 16"W 351 16"W

33"H

Tip: Width dimension is per skin. Skins are sold in pairs.

Skin TechnologySkin

Cable ManagementSkin

Skin TechnologySkin


TechnologySkin


Skin Skin Cable ManagementSkin








FlexFrame


Se

ctio

n N

am

e

Statement of Line

Sk

ins

Worksurface Attachment Skins 231 16" 291 16" 351 16"

81 4"H • • •

Skin Pair for Cantilever Table Attachment 231 16" 291 16" 351 16"

243 4"H • • •

Cantilever Desk Attachment Skins 351 16"

243 4"H •





................................................................................................................................................

................................................................................................................................................

...............................................................................................................

FlexFrame

Skins


Actual Dimensions

Width

Height

Thickness

Skin

231 16", 291 16", or 351 16"

81 4", 161 2", 33", or 491 2"

1 2"

Technology Skin and Cable Management Skin

231 16", 291 16", or 351 16"

161 2"

1 2"

Double Shelf Skin

2211 16", 2811 16", or 3411 16"

53 4" or 14"

1 2"

Double Shelf Technology Skin and Cable Management Skin

2211 16", 2811 16", or 3411 16"

14"

1 2"

Single Shelf Skin

2211 16", 2811 16", or 3411 16"

7" or 151 4"

1 2"

Single Shelf Technology Skin and Cable Management Skin

2211 16", 2811 16", or 3411 16"

151 4"

1 2"

Bin Skin and Cable Management Bin Skin

2211 16", 2811 16", or 3411 16"

14"

1 2"

TV Attachment Skin

231 16", 291 16", or 351 16"

33"

1 2"

Technology skins provide connections to power, data, and LED light switches.

Skins come in a variety of heights and widths to t 24", 30", and 36"W sections.

Cable management skins have a exible strip to allow for easy removal and for cords and cables to pass through.

Skins are available for shelves and bins.

TV attachment skins support monitors up to 65" and up to 200 pounds on the workwall.

Product Details

Fabric Low-PressureLaminate

GlassWoodSkins are available in fab-ric, Low-Pressure Laminate, wood, or glass.Tip: Glass skins are only available 33"H and 491/2"H.

Fabric skins are available in warp horizontal or warp vertical direction.

Fabric skins are tackable.Tip: Fabric technology skins are not tackable.

Grain direction on wood skins is available horizontally or vertically.

Grain direction runs vertically on Low-Pressure Laminate skins.

Glass skins are back painted. Dry erase markers can be used on glass skins.

Skins nish the appear-ance of a workwall. Skin combinations can vary to accommodate a variety of needs. Skins also create a cable management space behind them.�cSpecifying, pages 94–99


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame

FlexFrame Speci cation Guide cSkins, continued 41

Skins

Sk

ins

Corded technology skins have an 8' cord with a 15 amp grounded plug.

Hardwire technology skins have an 8' length of exible metal conduit.

Modular technology skins have an 8' length of modular harness with a male connector. Modular technol-ogy skins include an inline and H connector to allow it to connect to modular power in a variety of applications. Modular technology skins are always wired to Line 1. cSee Using Modular Power on page 61 for diagram examples.

Technology skins accommodate data and power needs. Technology skins are available with Data Power Power or Data Power Switch con gurations.

Technology skins thathave Data/Power/Power have space for two customer supplied Extron AAP plates and two simplex receptacles, 91 2"W X 27 20"H.

Technology skins that have Data/Power/Switch have space for two customer supplied Extron AAP plates, one simplex receptacle, and one opening for the LED light switch included with the light kit. The LED light switch is eld installed in the technology skin.

Skins that are not used in a shelf or bin come standard with painted metal blades on the sides. This is to provide a consistent aesthetic with other components.

Skins for use with shelves and bins are unique and do not have a blade. The blade is already standard on the shelf or bin.

Skins ship with attachment hardware.

Skins can be removed and recon gured.

Skins align with the front edge of the workwall frame.Tip: Except the skin for bin is set back an additional 1" to allow for more storage space.

Technology skins allow convenient user access to power, data, and light switches.

Technology skins are available in corded, hard-wire, and modular versions.

Shrouds are available as an option on TV attachment skins to support one 32", 42", 55", or 65" monitor (not included).

Shrouds are painted alu-minum and available in plati-num, arctic white gloss, near black, and midnight metallic.

Shrouds connect to the TV attachment skin with included hardware and include a mount for the size monitor speci ed.

Connections

Skins for use with shelves t in between the blades and attach with provided hardware.

Skins attach using spring clips and can be easily removed, replaced, and repositioned.

Spanning TV attach-ment skins are speci ed as a left and right pair. This allows a TV to be centered over two skins in two adja-cent sections.Tip: Adjacent sections must be of the same width.

Cut-outs on TV attach-ment skins allow wires to run behind the workwall. The cut-out is not nished but will be concealed behind the TV.

TV attachment skins are available with either a small bracket for monitors 32" or smaller or a large bracket for monitors over 32" and up to 65", and up to 200 pounds. Monitors can be adjusted vertically above or below centerline. Additional adjustment is available in the TV bracket itself.Tip: For small bracket, mounting holes cannot exceed 566 mm x 333 mm. Recommended display sizes 26"–32". For large bracket, mounting holes cannot exceed 770 mm x 485 mm. Recommended display sizes 32"–65". If a monitor does not meet these mounting hole speci cations, please contact Steelcase Specials Engineering to help secure the monitor to FlexFrame.

Architectural Adapter Plates (AAPs) provide access to data, audio, video, telephone, and other tech-nologies. AAPs are available from Extron Electronics. For information on AAPs and to nd an Extron Electronics dealer, contact Extron at 800.633.9876 or online at www.extron.com.

3/4"

Cable management skins feature a 3 4"H ex-ible strip that allows cords and cables to be routed behind the skin. The exible strip also allows for the skin to be easily removed without tools.Tip: The exible strip is on the bottom edge of the skin. A cable management skin for double shelf or bin may be ipped so the exible strip is on the top edge of the skin.

TV attachment skins are available as centered or spanning.

Centered TV attach-ment skins are used to center a TV on one skin in one section.


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Skins, continued

Surface MaterialsSkins• Fabric• Low-Pressure Laminate• Wood• Glass

Technology Skin Power Unit• Black

Cable Management Strip• 6694 Slate

Blades• Paint

Application Topics

21/2"

Skins are aligned at the front of the frame. This allows 21 2" behind the skin for the routing of cables. A wire cut-out should be used when routing cords and cables behind skins.

Skins for bins are not aligned with the front edge of the workwall frame. The skins set back an additional 1" to allow for more room in the bins. Base power tray will not t behind these skins.

Cable management skins for bins are aligned at the front edge of the work-wall frame. This allows for wiring and base power trays behind the skin. Consider this when determining the storage capacities of the bins.

A painted metal top cap may be used to ll the space between the wall and the skin when the top of the skin is exposed. Thickness of the top cap matches metal blades.



FlexFrame

Skins

Sk

ins


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame

Worksurface Attachment Skins


Actual DimensionsWidth 231 16", 291 16", or 351 16"

Height 81 4"

Brackets are height adjustable to accommodate a range of worksurface heights and thicknesses.

Wire management cut-out allows cords and cables to pass through.

Product Details

Worksurface attach-ment skins are available in fabric, Low-Pressure Laminate, or wood.

Fabric skins are availablein warp horizontal or warpvertical direction.

Fabric worksurface attachment skins are not tackable.


Grain direction runsvertically on Low-PressureLaminate skins.

Worksurface attach-ment skins come stan-dard with painted metal blades on the sides. This is to provide a consistent aesthetic with other components.

Skins ship with attachmenthardware.

21/2"

Skins align at the front of the workwall frame. This allows 21 2" behind the skin for the routing of cables. A wire cut-out should be used when routing cords and cables behind skins.

Worksurface attach-ment skins allow work-surfaces from a variety of product lines to attach to workwall. Worksurface attachment skins nish the appearance of a workwall.cSpecifying, pages 100


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame


Worksurfaces with a coped edge cannot connect to worksurface attachment skin.

Wiring and Cabling

Worksurface attach-ment skin has a wire pass through for cords and cables.

Receptacle kits should not be used directly behind worksurface attachment skins.

Application TopicsWorksurface attach-ment skins may be used in adjacent sections.

Centerlineof frame

Worksurfaces will align with the center of workwall frame verticals.

Surface MaterialsSkins• Fabric• Low-Pressure Laminate• Wood

Blades• Paint

Connections

Worksurface attach-ment skins are designed to support one end of a worksurface.

Worksurface must be the same width as the workwall section.

A worksurface may not be supported by multiple worksurface attachment skins.

The end of the work-surface that is not sup-ported by the worksurface attachment skin must be supported by a leg, table base, end panel, storage, or other support.

1/2"

Worksurface attach-ment skin has height adjustable brackets to sup-port a range of worksurface heights and worksurface thicknesses.

Bracket is adjustable in 1 2" increments.

When workwall is installed in its lowest posi-tion, 13 16" above the oor, 11 2" thick worksurfaces can be supported between 271 2" and 291 2" worksurface height.

Worksurface will not always align with the top edge of the skin depending on worksurface height, thickness, and workwall application. Tip: Follow guidelines for worksurface center supports and braces.

Worksurfaces supported by a worksurface attachment skin should not be used to support upper storage.

If attaching Elective Elements worksur-faces, support guidelines are equivalent to worksur-faces attached using ush mount brackets. �cRefer to Worksurface Support Guidelines in the Elective Elements Speci cation Guide.

Worksurface Attachment Skins

Sk

ins


................................................................................................................................................

................................................................................................................................................

FlexFrame

Cantilever Desk and Table Attachment Skins


Actual Dimensions Desk Table Attachment Attachment Skins Skins

Width 351 16" 231 16", 291 16", or 351 16"

Height 243 4" 243 4"

Skin pairs for cantilever table attachment provide a structural connection for cantilever tables to FlexFrame.�cSpecifying, page 101

Desk attachment skins provide a structural connec-tion for cantilever desks to FlexFrame.�cSpecifying, page 101


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

FlexFrame


Skins for cantilever table attachment include two adjustable brackets to support both corners of the worksurface attached to workwall.

Wiring and Cabling

Wire pass through is concealed by the TechBox when installed.

Receptacle kits should not be located behind desk and table attachment skins.Tip: Refer to removable skins and access to electri-cal connections section.

Surface MaterialsSkins• Fabric• Low-Pressure Laminate• Wood• Glass

Blades• Paint

Product Details

Desk and table attach-ment skins are available in fabric, Low-Pressure Laminate, or wood.

Fabric skins are availablein warp horizontal or warp vertical direction.

Fabric desk and table attachment skins are not tackable.


Grain direction runsvertically on Low-PressureLaminate skins.

Desk and table attach-ment skins come stan-dard with painted metal blades on the sides. This is to provide a consistent aesthetic with other components.

Skins ship with attachmenthardware.

21/2"

Skins align at the front of the workwall frame. This allows 21 2" behind the skin for the routing of cables. A wire cut-out should be used when routing cords and cables behind skins.

Desk attachment skins are handed.

Skins for cantilever table attachment are speci ed as left and right pairs. This allows a cantile-ver table to be centered in two adjacent sections.Tip: Adjacent sections mustbe of the same width.

Connections

TechBox connects to the desk or table attachment skin.

Skins for cantilever desk attachment include one adjustable bracket to support the corner of the worksurface attached to workwall.

Cantilever Desk and Table Attachment Skins

Sk

ins


................................................................................................................................................

................................................................................................................................................


FlexFrame

Shrouds For Skins and Shroud Monitor Relationships

Dimensions — Shrouds For SkinsDFeatures DOverall DOverall DOverall DOveralld dInterior dHeight dDepth dLengthd dLength d d dWith Flapsd d d d d d d� d� d� d

Shrouds For Skins32" Shroud 291 2" 231 2" 61 2" 35"

42" Shroud 39" 271 2" 61 2" 44"

46" Shroud 431 2" 301 2" 61 2" 481 2"

55" Shroud 51" 35" 61 2" 56"

65" Shroud 60" 401 2" 61 2" 65"d d� d� d� d

Dimensions — Shroud Monitor RelationshipsDRecommended D32" D42" D46" D55" D65"dMonitor d d d d� ddDimensions d d d d� dd d d d d� d

Shroud Monitor RelationshipsMinimum width 303 4" 39" 44" 511 2" 601 2"

Maximum width 321 4" 411 2" 46" 531 2" 62"

Minimum height 191 4" 23" 26" 31" 351 2"

Maximum height 211 2" 26" 281 2" 33" 38"d d d d d� d

Tip: External speakers should be included when determining dimensions. Tip: FlexFrame does not support monitors that are larger than 65" or over 200 pounds.

OverallHeight

Overall Length With Flaps

Overall Interior Length

OverallDepth

Top View


FlexFrame


Sk

ins

Shrouds For Skins and Shroud Monitor

Relationships


................................................................................................................................................

................................................................................................................................................


FlexFrame

Shelves, Bins, Drawers, and Skins Arrangements

Shelves, Bins, Drawers, and Skins ArrangementsWorkwall components allow for segmentation on an 81 4" vertical module. Each height workwall frame can hold a speci c combination of components. Components include shelves, bins, drawers, and skins. Workwalls can be used without skins. Heights of components are multiples of 81 4".

Some examples of how to ll a 161/2"H vertical segment

161/2"H Skin 161/2"H Single Shelf with Skin 161/2"H Double Shelf with Skin 161/2"H Bin with Skin

225/8"H workwall frames hold one 161 2"H component or any combination of two 81 4"H components.

161/2"81/4"

81/4"

A B A B

4715/16"H workwall frames hold two 161 2"H components and one 81 4"H component or any equivalent combination.

161/2"

81/4"

161/2"

81/4"

81/4"

81/4"161/2"

81/4"

81/4"

81/4" 81/4"

33"

161/2"

A B C D A B C D

647/16"H workwall frames hold three 161 2"H components and one 81 4"H component or any equivalent combination.

A B C D

161/2"

81/4"

161/2"

33"

81/4"

491/2"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

A B C D

161/2"

161/2"

161/2"


................................................................................................................................................

................................................................................................................................................

FlexFrame


Shelves, Bins, Drawers, and Skins Arrangements

Sk

ins

Shelves, Bins, Drawers, and Skins ArrangementsWorkwall components allow for segmentation on an 81 4" vertical module. Each height workwall frame can hold a speci c combination of components. Components include shelves, bins, drawers, and skins. Workwalls can be used without skins. Heights of components are multiples of 81 4".

8015/16"H workwall frames hold four 161 2"H components and one 81 4"H component or any equivalent combination.

A B C D

161/2"

81/4"

161/2"

161/2"

33"

81/4"

491/2"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

81/4"

A B C D

161/2"

161/2"

161/2"

161/2"

Note: Examples shown indicate only a few possibilities.


................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

Removable Skins and Access to Electrical Connections


FlexFrame

Removable Skins and Access to Electrical Connections

S

kin

C

able

Man

agem

ent

Ski

n

T

echn

olog

y S

kin

Component

161 2"H Lower Single Shelf NAN

161 2"H Upper Single Shelf AAN

161 2"H Double Shelf NAN

161 2"H Bin NAN

81 4"H Skin ANN

161 2"H Skin AAN

33"H Skin ANN

491 2"H Skin ANN

Legend

˜ = Not removableÅ = Removable

Shelves

161 2"H Lower Single Shelf with Cable Management Skin 161 2"H Upper Single Shelf with Cable Management Skin

Many FlexFrame skins have been designed to allow easy removal for access to power and data connections and other features located behind the workwall. Skins use spring clips to attach, allowing them to be removed and replaced without tools in many applications. Whenever a receptacle kit is placed behind a skin, that skin must be easily remov-able for easy access and code compliance.

Cable management skins are always remov-able and are recommended for use in front of base power and receptacle kits. Many other skins can be easily removed when used in the bottom most position of the workwall. Consult the matrix for details.


................................................................................................................................................

................................................................................................................................................

FlexFrame Speci cation Guide cRemovable Skins and Access to Electrical Connections, continued 53

FlexFrame

Removable Skins and Access to Electrical

Connections

Sk

ins

Removable Skins and Access to Electrical Connections, continued

Shelves, continued

161 2"H Upper Single Shelf with Skin 161 2"H Double Shelf with Cable Management Skin

Bin

161 2"H Bin with Cable Management Skin


................................................................................................................................................

................................................................................................................................................


FlexFrame



Skins

161 2"H Skin 161 2"H Cable Management Skin



Ele

ctric

al

UnderstandingElectrical


Electrical 58

Application Topics

Using Modular Power 61


FlexFrame

Statement of Line


Workwall Wire ManagersUnderstandingc Page 58Specifyingc Page 105

2-Circuit Receptacle KitUnderstandingc Page 58Specifyingc Page 104

1-Circuit Receptacle KitUnderstandingc Page 58Specifyingc Page 103

Modular HarnessUnderstandingc Page 58Specifyingc Page 103

Workwall Base TraysUnderstandingc Page 58Specifyingc Page 104

Hardwire Power InfeedUnderstandingc Page 58Specifyingc Page 104


FlexFrame


Se

ctio

n N

am

e

Statement of Line

Ele

ctric

al


FlexFrame

Electrical


TV Attachment Skins

Technology Skins

Power Infeed

Modular Harness

Base Power Tray and Receptacle Kits

Actual Dimensions

Width

Height

Depth

Modular Harness

24", 30", 36", 42", 48", 54", 60", 66", 72", 78", 84", 90", 96", 102", 108", 114", or 120"

N.A.

N.A.

Receptacle Kits

113/4"

1"

13/4"

Power Infeed

94"

N.A.

N.A.

Base Power Tray

231/16", 291/16", or 351/16"

33/4"

2"

Workwall Wire Manager

231/16", 291/16", or 351/16"

1"

2/3"

Workwalls are designed to support technology. Electrical needs can be solved in a variety of ways.

A modular power sys-tem includes base power trays, modular harnesses, receptacle kits, a base power infeed, and modular technology skins.�cSpecifying, pages 103–105.

Receptacle kits are intended to provide con-cealed connections for devices that are plugged in for long periods of time and accessed occasionally.

Technology skins are intended to provide easy connections for devices that are connected and discon-nected frequently.

................................................................................................................................................

................................................................................................................................................


FlexFrame

FlexFrame Speci cation Guide cElectrical, continued 59

Electrical

Ele

ctric

al

Receptacle kits face upward.

Receptacle kits snap into the center of the base power tray. 1-circuit recep-tacle kits include two duplex receptacles wired to Line 1. 2-circuit receptacle kits include one duplex recepta-cle wired to Line 1 and one duplex receptacle wired to Line 2.

Receptacle kits must have a removable skin installed in front of them. Cable management skins are recommended.cSee Removable Skins and Access to Electrical Connections on page 52.Tip: If modular harnesses or receptacle kits are used in a section, some exible metal conduit will be visible when skins are removed.

Multiple receptacle kits in different work-wall sections can be connected using modular harnesses.

Modular harnesses are available in lengths from 24" to 120" to accommodate connection of modular components in different workwall sections. Modular harnesses are compatible with 1-circuit and 2-circuit receptacle kits.

Technology skins allow convenient user access to power, data, and light switches.

Technology skins are available in corded, hard-wire, and modular versions.

Corded technology skins have an 8' cord and a 15 amp grounded plug.

Product DetailsModular power cannot be used on workwalls without skins.Tip: Plan workwalls without skins to allow access to building outlets.cSee Removable Skins and Access to Electrical Connections, page 52.

Hardwire power infeeds bring the power from the building power source into the workwall.

Power infeeds can connect to modular har-nesses, technology skins, or 1-circuit or 2-circuit receptacle kits.

A base power tray is required whenever a recep-tacle kit or modular harness is used in a section.

1"

1"Lowercomponent

The base power tray will hang approximately 1" below the lower most component.

Workwall wire manager does not hang below the shelf.

Application TopicsBase power tray should only be used in the lower most position of the workwall.

Workwall wire manager should only be used in the lower most position of a workwall.

Base power tray can be installed on the back edge of the bottom position of a double shelf, bin, or lower single shelf.

Base power tray may also be installed behind the skin of an upper single shelf.

Base power tray may be installed behind a skin.

Workwall wire manager may be used on 4715/16", 647/16", and 8015/16" H work-wall frames to prevent wires from hanging below a lower single shelf, double shelf, bin, or drawer in the lower most position on the work-wall, but will not allow cords and cables to pass through the cut-out on the inner vertical frame piece. Tip: Specify a base power tray instead to allow cords and cables to be passed through the cut-out.

Workwall wire manager must be installed on the back edge of a lower single shelf, the bottom position of a double shelf, bin, or drawer.

Workwall wire managers cannot hold receptacle kits.

Local electrical codes vary, so consult with your local authority having juris-diction as they have nal say if the products as installed are compliant with local code.

Corded technology skins can plug into a recep-tacle kit or into a building receptacle. Connection must be accessible.

Hardwire technology skins have an 8' length of exible metal conduit.

Modular technology skins have an 8' length of modular harness with a male connector. Modular technol-ogy skins include an inline and H connector to allow it to connect to modular power in a variety of applications. Modular technology skins are always wired to Line 1.cSee Using Modular Power on page 61 for diagram examples.

Technology skins accommodate data and power needs. Technology skins are available with Data/Power/Power or Data/Power/Switch con gurations.

Technology skins that have Data/Power/Power have space for two customer supplied Extron AAP plates and two simplex receptacles.

Technology skins that have Data/Power/Switch have space for two customer supplied Extron AAP plates, one simplex receptacle, and one open-ing for the LED light switch included with the light kit. The LED light switch is eld installed in the technology skin.

Architectural Adapter Plates (AAPs) provide access to data, audio, video, telephone, and other tech-nologies. AAPs are available from Extron Electronics. For information on AAPs and to nd an Extron Electronics dealer, contact Extron at 800.633.9876 or online at www.extron.com.

Workwall wire manager can route wires for lights and other cables through the cut-out on a 225/8"H workwall frame and prevents wires and cables from hanging below the shelf.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Electrical, continued


Technology skins can not be used in front of receptacle kits.

Skins for bins are not aligned with the front edge of the workwall frame. The skins set back an additional 1" to allow for more room in the bins. Base power tray will not t behind these skins.

Cable management skins for bins are aligned at the front edge of the work-wall frame. This allows for wiring and base power trays behind the skin. Consider this when determining the storage capacities of the bins.

A base power tray without a receptacle kit can be used to route modular harnesses and cords through a section.

Cords and cables can pass through the bottom of a base power tray.

Base power tray should not be used in 225/8"H workwalls because the wire management cut-out in the inner vertical frame piece cannot accommodate modu-lar power. Tip: Use workwall wire man-ager for 225/8"H workwalls.

Receptacle kits may not be placed behind a drawer.

Surface MaterialsReceptacle kits• 6000 Black

Base Power Tray• 7237 Slate

Workwall Wire Manager• 7237 Slate

13/4"

15/16"

Inner vertical frame pieces used with 4715 16", 647 16", or 8015 16"H workwall frames come standard with a cut-out for wire manage-ment near the bottom of the vertical frame piece.

5/8"

1"

Inner vertical frame pieces used with 225/8"H workwall frames have a smaller cut-out designed to manage LED light cords and not power cords.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Using Modular Power

FlexFrame Speci cation Guide cUsing Modular Power, continued 61

Using Modular Power

Ele

ctric

al

Legend = Receptacle Kit

= Modular Harness

= Hardwire Power Infeed

= Technology Skin

Determining Modular Harness Lengths

To determine the length of a modular harness, add up the width of each section the modular harness passes through and half the width of each section where the modular harness connects to a receptacle kit.

24"24"24"

24"

36"24"36"

60"

Using Power Infeed

Connecting at End of Receptacle Kit

24"24"24"

24" 24"

Connecting In-line at Receptacle Kit

36"24"36"

30" 30"

Connecting In-line with Modular Harnesses

36"24"36"

30" 30"

Tip: Hardwire infeed includes inline and H connector.

................................................................................................................................................

................................................................................................................................................


FlexFrame

Using Modular Power, continued


Using Modular Technology Skins

Connecting at End of Receptacle Kit

24"24"24"

48"

Connecting In-line at Receptacle Kit

36"24"36"

30" 30"

Connecting In-line with Modular Harnesses

36"24"36"

30" 30"

Tip: Modular technology skins include inline and H connector.

Legend = Receptacle Kit

= Modular Harness

= Hardwire Power Infeed

= Technology Skin

................................................................................................................................................

................................................................................................................................................



Lig

htin

g

UnderstandingLighting


Lighting 66

Application Topics

Determining LED Light Wattage 68

Wiring Diagram For Lights 69


FlexFrame

Statement of Line


30-Watt Remote Control Light Kit with DimmerUnderstandingc Page 67Specifyingc Page 107

Light Dimming KitsUnderstandingc Page 67Specifyingc Page 106

Light KitsUnderstandingc Page 67Specifyingc Page 106


FlexFrame


Se

ctio

n N

am

e

Statement of Line

Lig

htin

g


FlexFrame

Lighting


Switch

Terminal Blocks

Power Transformer

LED Lights

Lights align on shelves of different depths.

Workwalls have an optional integrated lighting system.�cSpecifying, page 106

................................................................................................................................................

................................................................................................................................................


FlexFrame


Lighting

Lig

htin

g

A 60-watt light kit includes two power trans-formers, one switch, and two terminal blocks that can accommodate up to sixteen total shelves with lights. A 60-watt light kit requires two power receptacles.

A 30-watt remote control light kit with dimmer includes one power transformer, a remote control, a receiver, and a terminal block that accom-modates up to eight shelves with lights or 30 watts, whichever comes rst.

The remote control has functions for power, a dial for dimming, and preset high and low light levels.

Remote control and receivers are coded to operate as a pair to prevent interference from other light kits.

The light switch (black) controls all lights connected to the power kit. Light switches must be installed in a technology skin (ordered separately).

Dimming kits include everything included in a light kit plus an additional dimming module for each transformer. The 60-watt light dimming kit allows two groups of lights to be dimmed independently.

Dimming control has a 79" cord allowing it to be placed conveniently for peri-odic adjustment.

Product Details

LED lights are available as an option on shelves, bins, and drawers. On double shelves lights are available on one or both shelves.

A light kit must be speci- ed when ordering LED lights.cSee Determining LED Light Wattage chart to deter-mine the light kit needed, page 68.

A technology skin must be speci ed to house the switch from a light kit. The switch controls the lights connected to the light kit.

When a remote con-trol light kit is speci ed, a technology skin is not required because the remote control acts as the switch.

The LED lights are ush mounted on the underside of the shelves, bins, or drawers.

Lights ship installed in the shelves, bins, or drawers.

Shelves, bins, or drawers speci ed with LED light option include the lights, lens cover, and a 192" length of low voltage cord to plug into a light kit.

Light temperature is 4100K.

A 30-watt light kit includes one power trans-former, one switch, and one terminal block that can accommodate up to eight shelves with lights. A 30-watt light kit requires one power receptacle.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame

Determining LED Light Wattage


Determining LED Light Wattage

Light WattageLED lights are optional for shelves, bins, and drawers. A light kit must be speci ed to connect the shelf lights to power and switch them on and off. The light kit needed depends on the total wattage of all of the LED lights used for a workwall. Different width shelves have different wattages:

To Calculate Total Wattage For A Workwall:• Determine how many shelves of each width have been speci ed with LED lights.• Multiply quantity of shelves by light wattage for each width.• Add up total watts.• If total watts is 30 watts or less, the 30-watt light kit should be speci ed. If the total watts is between 30W and 60W, the 60-watt light kit should be speci ed.

4 Shelves with LED Lights

4 (lights) x 5.6W = 22.4WUse 30W light kit

9 Shelves with LED Lights

9 (lights) x 5.6W = 50.4WUse 60W light kit

30" 30" 30" 30" 30"

Legend = LED Light

Shelf Width Light Wattage231 16" 4.8

291 16" 5.6

351 16" 7.3

................................................................................................................................................

................................................................................................................................................


FlexFrame

Wiring Diagram For Lights

FlexFrame Speci cation Guide cWiring Diagram For Lights, continued 69

Wiring Diagram For Lights

Lig

htin

g

30-Watt Light Kit

Terminalblock

Terminalblock

Switch

Power transformer

LED Lights

30-Watt Light with Dimming Kit

Dimming module

LED Lights

Terminalblock

Terminalblock

Terminalblock

Switch

Power transformer

Dimming control

60-Watt Light Kit

Terminalblock

Terminalblock

Switch

Power transformer

LED Lights

Terminalblock

Terminalblock

................................................................................................................................................

................................................................................................................................................



FlexFrame

Wiring Diagram For Lights, continued

60-Watt Light with Dimming Kit

Dimming module

Terminalblock

Terminalblock

Power transformer

Dimming control

Switch

LED Lights

Terminalblock

Terminalblock

30-Watt Light Kit with Remote Control

Terminalblock

Terminalblock

Power transformer

Receiver

LED Lights

................................................................................................................................................

................................................................................................................................................



Ca

ntile

ver D

esk

s a

nd

Ta

ble

s

UnderstandingCantilever Desks and Tables



Cantilever Desks and Tables with media:scape 76


FlexFrame

Statement of Line


36"D

Cantilever Desks 72"W 78"W 84"W 90"W

36"D • • • •*Left-hand is shown, right-hand is also available.

48"D

Cantilever Tables 72"W 90"W

48"D • •




FlexFrame


Se

ctio

n N

am

e

Statement of Line

Lig

htin

gC

an

tileve

r De

sks

an

d T

ab

les


FlexFrame

Cantilever Desks and Tables


Cantilever desks and tables connect to FlexFrame workwall using attachment skins.

Grommet features a dual direction hinged lid and has connections for power, data, and available media:scape technology.

Worksurface in wood or laminate is cantilevered to encourage collaboration.

TechBox supports the worksurface and conceals cords, cables, andmedia:scape electronic components.

Actual Dimensions Cantilever Cantilever Desks Tables

Depth 36" 48"

Width 72", 78", 84", or 90" 72" or 90"

Height 291 2" 291 2"

Cantilever desks and tables are not approved to be freestanding or attached to drywall without the use of a FlexFrame workwall.

................................................................................................................................................

................................................................................................................................................



Lig

htin

gC

an

tileve

r De

sks

an

d T

ab

les

FlexFrame


Wiring & CablingLid on grommet opens in both directions affording easy access from either side.

Lid can be completely removed for servicing of electronics.

Grommet has six power outlets. Two outlets are located on the side to accommodate large power adapters.

Grommets utilize Extron Electronics Architectural Adapter Plates (AAPs) to provide access to data, audio, video, and telephone.

Each grommet can accommodate up to two customer provided single space AAPs.

Grommets ship with blank cover plates. AAPs are avail-able from Extron Electronics. For information on AAPs and to nd an Extron Electronics dealer, contact Extron at 800.633.9876 or online at www.extron.com.

Power unit in grommet is available in corded, hard-wired, and modular versions.

If corded version con-nects to workwall base power, it must be located behind a removable skin. See skins section for details. cSee Skins page 40 for details.

Cord is 9 feet with a 15 amp grounded plug.

Modular version is a two circuit male connector designed to connect to the workwall power system only.

Modular version is always wired to circuit 1.

Product DetailsDesks and tables have three main components: worksurface, TechBox, and grommet.

TechBox is 51" wide. Wider worksurfaces cantile-ver a great distance from the TechBox.

Desks have one cantile-ver bracket supporting the worksurface. The cantilever bracket is painted black.

Tables have two cantilever brackets supporting each corner of the worksurface. The cantilever brackets are painted black.

Grommets can support one Eyesite monitor arm using the FrameOne mount.

Worksurface is 11 2" thick.

ConnectionsCantilever desks must attach to workwall using a desk attachment skin.

Cantilever desks must attach to a 36" wide section of workwall.

Cantilever tables must attach centered on an inner vertical frame piece with sections of equal width on each side. Sections can be 24", 30", or 36" wide.

Cantilever tables must attach to workwall using a skin pair for cantilever table attachment.

Desk and tables cannot be used freestanding or attached to a building wall.

SOTO worktools and lighting can be attached to the rail. SOTO shelves inter-fere with the swing of the lid and should not be used.

Grommets include an opening for the LED light switch included in work-wall light kits.

If not using LED lighting, this opening can be used as an additional simplex data port.

Grommets in desks without media:scape have an accessory tray convenient for personal electronics.

Surface MaterialsWorksurface• Wood veneer with 3 mm wood square edge• Laminate with plastic edge• Customiz stain (option on wood)

TechBox• Wood Veneer• Laminate• Customiz stain (option on wood)

Grommet• 4799 Platinum• 7207 Textured Black• 7241 Textured Arctic White• 7246 Midnight Metallic

Cantilever Bracket• 7207 Textured Black

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................



FlexFrame

Cantilever Desks and Tables with media:scape

Scaler insures consistent image resolution to the displays. For power man-agement, the media:scape setting will automatically go into standby mode when media:scape is not in use. The system can be reacti-vated by simply connecting a device to one of the PUCKs.

Power cable to detached power cord is provided within monitor.

PUCK (Personal User Control Key) plugs into the user s laptop and allows them to send their content to the display by touching an illuminated display number.

The switcher connects to the PUCKs, and controls which user’s laptop content is shown on the display(s). Up to four displays can be accommodated.

Sequence

Legend

P = Power

Switcher

PUCKs sendsignal to Switcher

Switcher sendssignal from PUCKs

to Display(s)

HDMI Cable

Scaler

P

Dis

play

Integrated pulley system allows PUCKs to be fully retracted into the TechBox to manage cables and stow PUCKs safely when not in use.

Actual Dimensions Cantilever Cantilever Desks Tables

Depth 36" 48"

Width 72", 78", 84", or 90" 72" or 90"

Height 291 2" 291 2"

Cantilever desks and tables with media:scape create high-performance collab-orative applications in private of ces and meeting spaces.

HDMI cable receives information from the switcher and sends that information to the scaler. Note: When integrating with video confer-encing, an additional HDMI cable and scaler is required.

................................................................................................................................................

................................................................................................................................................


FlexFrame Speci cation Guide cCantilever Desks and Tables with media:scape, continued 77

FlexFrame

Cantilever Desks and Tables with media:scape

media:scape Switcher

Inputs 5-8from PUCKs

Inputs 1-4from PUCKs

AudioInput 3

Outputs1-4

AuxiliaryInput 3

Auxiliary Inputs1 and 2

Audio Inputs1 and 2

Power

Control

Network(RJ-45)

AuxiliaryAudio Out

Inputs 1-4 and inputs 5-8 support up to eight PUCKs that can be con-nected to the media:scape switcher. Although they look like HDMI cables inputs, plugging standard HDMI cables into these sockets can harm the switcher.

Switcher outputs are the output jacks to the monitors and projectors.The switcher can handle up to four output displays via HDMI cables.

Cantilever desks and tables with media:scape provide two specialized audio/video inputs. For integration with video con-ferencing, cable television, document cameras, and other devices, please refer to switcher user manual.

Ca

ntile

ver D

esk

s a

nd

Ta

ble

s

................................................................................................................................................

................................................................................................................................................


FlexFrame

Cantilever Desks and Tables with media:scape, continued


PUCK tray has space for three PUCKs and connectors.

Integrated pulley system allows PUCKs to be fully retracted into the TechBox to manage cables and stow PUCKs safely when not in use.

Indicator light on PUCK tray communicates system status.

Steelcase Maintenance Agreement

Cantilever desks and tables with media:s-cape include a one year Steelcase maintenance agreement to provide an enhanced support system for media:scape settings with digital components. The maintenance agreement covers:• software/ rmware

enhancements• expedited shipping for

hardware replacements• prioritized technical

support

Grommets include an opening for the LED light switch included in workwall light kits.

If not using LED light-ing, this opening can be used as an additional sim-plex data port.

Surface MaterialsWorksurface• Wood veneer with 3 mm wood square edge• Laminate with plastic edge• Customiz stain (option on wood)

TechBox• Wood Veneer• Laminate• Customiz stain (option on wood)

Grommet• 4799 Platinum• 7207 Textured Black• 7241 Textured Arctic White• 7246 Midnight Metallic

Cantilever Bracket• 7207 Textured Black

Wiring & CablingLid on grommet opens in both directions affording easy access from either side.

Lid can be completely removed for servicing of electronics.

Grommet has six power outlets. Two outlets are located on the side to accommodate large power adapters.

Grommets utilize Extron Electronics Architectural Adapter Plates (AAPs) to provide access to data, audio, video, and telephone.

Each grommet can accommodate up to two customer provided single space AAPs.

Grommets ship with blank cover plates. AAPs are avail-able from Extron Electronics. For information on AAPs and to nd an Extron Electronics dealer, contact Extron at 800.633.9876 or online at www.extron.com.

Power unit in grommet is available in corded, hard-wired, and modular versions.

If corded version con-nects to workwall base power, it must be located behind a removable skin. cSee Skins, page 40 for details.

Cord is 9 feet with a 15 amp grounded plug.

Modular version is a two circuit male connector designed to connect to the workwall power system only.

Modular version is always wired to circuit 1.

ConnectionsCantilever desks must attach to workwall using a desk attachment skin.

Cantilever desks must attach to a 36" wide section of workwall.

Cantilever tables must attach centered on an inner vertical frame piece with sections of equal width on each side. Sections can be 24", 30", or 36" wide.

Cantilever tables must attach to workwall using a skin pair for cantilever table attachment.

Desk and tables cannot be used freestanding or attached to a building wall.

SOTO worktools and lighting can be attached to the rail. SOTO shelves inter-fere with the swing of the lid and should not be used.

Product DetailsDesks and tables have three main components: worksurface, TechBox, and grommet.

TechBox is 51" wide. Wider worksurfaces cantile-ver a great distance from the TechBox.

Desks have one cantile-ver bracket supporting the worksurface. The cantilever bracket is painted black.

Tables have two cantilever brackets supporting each corner of the worksurface. The cantilever brackets are painted black.

Grommets can support one Eyesite monitor arm.

Worksurface is 11 2" thick.

One scaler is included with each desk and table.

Refer to Smart and Connected Speci cation Guide for additional scal-ers and HDMI cables as needed. Cantilever desks and tables come with three PUCKs. PUCKS are avail-able with VGA, HDMI, DisplayPort, and Mini DisplayPort connections.

PUCK plugs into the user s laptop and allows them to send their content to the display by touching an illuminated display num-ber. The switcher connects to the PUCKs and controls which user s laptop content is shown on the display.

Virtual PUCK allows easy and ef cient wireless content sharing from lap-tops and tablets on multiple media:scape displays.cSee Smart and Connected Speci cation Guide for fur-ther details. One retractable audio cable is included with each desk and table.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


Vic

tor2

UnderstandingVictor2



Understanding 82



Victor2

Statement of Line

Mobile Unit Freestanding Unit

Tray Shelf Display

UnderstandingcPage 83Specifyingc Page 120






Victor2

Statement of Line

Vic

tor2



Victor2

Victor2

Actual Dimensions Mobile Unit Freestanding Unit

Depth 18" 25"

Width 36" 48" or 60"

Height 36" 36"

PAPEL

PAPER

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

RETO

RNAB

LE

RETURN

ABLE

Soft-touch integral handle allows easy move-ment from one location to another.

Four non-locking cast-ers are standard. Two cast-ers swivel, and two casters are xed.

Receptacles t bags from 30 gallon size and larger.

Leveling glides are fully adjustable up to 11/2".

Mobile unit has three openings. Eight insert options are available to pick for the openings. These eight insert options con-tain English, Spanish, and French.

Freestanding unit has four or ve openings. Eight insert options are available to pick for the openings. These eight insert options contain both English, Spanish, and French.

Receptacles contain features to accommodate oversized bags.

Victor2 is a recycling solu-tion that is appropriate for supporting larger work groups, conference rooms, and cafés. A mobile unit and two free-standing units are available.c�Specifying, pages 116–120

................................................................................................................................................

................................................................................................................................................



Vic

tor2

Victor2

Victor2

MIXTOS

MIXED

PAPEL

PAPER

PAPEL

PAPER

ABONO

COMP

OST

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

BASUR

A

WASTE

Freestanding unit is standard with either four or ve openings for inserts on the top of the unit.

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

Hinged doors on the front are standard on the freestanding unit for easy access to the receptacles.

Leveling glides on freestanding units are fully adjustable to 11/2".

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

Tray shelf can only be used with the freestanding unit.

Tray shelf ts most trays up to 203/4" x 12".

MIXTOS

MIXED

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

Freestanding four- or ve-slot opening will

accommodate two tray shelves.Tip: A gap of 15" will sepa-rate the two tray shelves on a ve-opening unit.

Maximum capacity of tray is 20 food trays with maximum size of tray 20" x 20".

BASUR

A

WASTE

Display holds two 81/2" x 11" papers or one 11" x 17" paper.Tip: Paper will be between two acrylic plates. Paper can easily be replaced with-out tools.

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

Display can only be used with the freestanding unit.

MIXTOS

MIXED

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

Freestanding four- or ve-slot opening will

accommodate two displays.Tip: A gap of 181/2" will sep-arate the two displays on a ve-opening unit.

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

BASUR

A

WASTE

One tray shelf and one display can be used on the freestanding unit.

Surface MaterialsTop and sides• Paint

Back and front• Wood• Laminate (HPL)• Customiz stain (option on wood)

Product Details

Mobile and freestand-ing units are standard with a metal case and top. Front and back of unit are avail-able in wood or laminate.

PAPEL

PAPER

ABONO

COMP

OST

RETOR

NABLE

RETUR

NABLE

Acrylic inserts etched with recycling icons are standard on mobile and freestanding units. The verbiage for each icon is in English/Spanish/French on the same insert.

Mobile unit is standard with three openings for inserts and sloped recepta-cles with built-in bagholding system.

Top on the mobile unit can be used for food service use or tray storage.

Hinged doors on the back are standard on the mobile unit for easy access to receptacles.

Four non-locking con-cealed casters, two swivel and two xed, are standard on the mobile unit.

Receptacles in mobile unit can accommodate 12 gallons each. Receptacles in freestanding unit can accommodate 30 gallon size and larger.

Soft-touch integral handle on mobile unit allows for easy movement from one location to another.

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................





Fle

xF

ram

e

Specifying FlexFrame

Con guration Options For Workwall Perimeter Frames 86



Double Shelves 89

Single Shelves 90

Bins and Drawers 92

Skins 94

Skins for Shelves and Bins 96

TV Skins 99

Worksurface Attachment Skins 100

Cantilever Desk and Tables Attachment Skins 101

Accessories 102

Electrical 103

Lighting 106


Cantilever Desks 108

Cantilever Desks with media:scape 110

Cantilever Tables 112

Cantilever Tables with media:scape 114

Victor2

Mobile Unit 116

Freestanding Units 118

Tray Shelf and Display 120


24

78"

30

78"

36

78"

48

78"

54

78"

60

78"

66

78"

72

78"

78

78"

84

78"

90

78"

96

78"

10

278"

10

878"

11

478"

12

078"

12

678"

13

278"

13

878"

14

478"


FlexFrame

Con guration Options For Workwall Perimeter Frames

................................................................................................................................................

................................................................................................................................................

Sections

One 24" ANNNNNNNNNNNNNNNNNNN

One 30" NANNNNNNNNNNNNNNNNNN

One 36" NNANNNNNNNNNNNNNNNNN

Two 24" NNNANNNNNNNNNNNNNNNN

One 24", one 30" NNNNANNNNNNNNNNNNNNN

One 24", one 36" NNNNNANNNNNNNNNNNNNN

Two 30" NNNNNANNNNNNNNNNNNNN

One 30", one 36" NNNNNNANNNNNNNNNNNNN

Two 36" NNNNNNNANNNNNNNNNNNN

Three 24" NNNNNNNANNNNNNNNNNNN

Two 24", one 30" NNNNNNNNANNNNNNNNNNN

One 24", two 30" NNNNNNNNNANNNNNNNNNN

Two 24", one 36" NNNNNNNNNANNNNNNNNNN

Three 30" NNNNNNNNNNANNNNNNNNN

One 24", one 30", one 36" NNNNNNNNNNANNNNNNNNN

Two 30", one 36" NNNNNNNNNNNANNNNNNNN

One 24", two 36" NNNNNNNNNNNANNNNNNNN

One 30", two 36" NNNNNNNNNNNNANNNNNNN

Three 36" NNNNNNNNNNNNNANNNNNN

Four 24" NNNNNNNNNNNANNNNNNNN

Three 24", one 30" NNNNNNNNNNNNANNNNNNN

Three 24", one 36" NNNNNNNNNNNNNANNNNNN

Two 24", two 30" NNNNNNNNNNNNNANNNNNN

One 24", three 30" NNNNNNNNNNNNNNANNNNN

Two 24", one 30", one 36" NNNNNNNNNNNNNNANNNNN

Four 30" NNNNNNNNNNNNNNNANNNN

Two 24", two 36" NNNNNNNNNNNNNNNANNNN

One 24", two 30", one 36" NNNNNNNNNNNNNNNANNNN

Three 30", one 36" NNNNNNNNNNNNNNNNANNN

One 24", one 30", two 36" NNNNNNNNNNNNNNNNANNN

One 24", three 36" NNNNNNNNNNNNNNNNNANN

Two 30", two 36" NNNNNNNNNNNNNNNNNANN

One 30", three 36" NNNNNNNNNNNNNNNNNNAN

Four 36" NNNNNNNNNNNNNNNNNNNA

Five 24" NNNNNNNNNNNNANNNNNNN

Four 24", one 30" NNNNNNNNNNNNNNNNANNN

Four 24", one 36" NNNNNNNNNNNNNNNNNANN

Three 24", one 30", one 36" NNNNNNNNNNNNNNNNNNAN

Three 24", two 36" NNNNNNNNNNNNNNNNNNNA

One 24", four 30" NNNNNNNNNNNNNNNNNNNA

Six 24" NNNNNNNNNNNNNNNNNNNA

Legend

˜ = Not availableÅ = Available

c See page 87 for

specifying information.

W

idth

of

Pe

rim

ete

r F

ram

es


FlexFrame



Wo

rkw

all


Standard Includes Required to Specify• Workwall perimeter frame: 8043 Clear Anodized Aluminum• Corner bracket: 4799 Platinum Metallic• Wall attachment brackets

1 Style number2 Con guration option

For Canadian PricingMultiply U.S. Price by the Canadian price factor.

See page 1 for details.

Tip: Inner vertical frame pieces must be ordered separately to create sections within the workwall perimeter frame. The exception is 247/8", 307/8", and 367/8" do not use an inner vertical frame piece.

Tip: Spacer brackets are shipped with workwall perimeter frame to provide accurate spacing for inner vertical frame pieces.

Speci cation Information 225/8"H 4715/16"H 647/16"H 8015/16"H

DDimensions DStyle DU.S. DStyle DU.S. DStyle DU.S. DStyle DU.S.dD W dNumber dPrice dNumber dPrice dNumber dPrice dNumber dPriced d d d d d d d d

Workwall Perimeter Frames31 8" 247 8" FFPF2224 $ 851 FFPF4724 $ 994 FFPF6424 $1174 FFPF8024 $1351

31 8" 307 8" FFPF2230 $ 877 FFPF4730 $1021 FFPF6430 $1201 FFPF8030 $1381





31 8" 667 8" FFPF2266 $1014 FFPF4766 $1159 FFPF6466 $1339 FFPF8066 $1517













31 8" 1447 8" FFPF22144 $1375 FFPF47144 $1517 FFPF64144 $1697 FFPF80144 $1877d d d d d d d d d

Required Selections (No Additional Cost) Required to Specify • Con guration c�See Con guration Options, page 86.

c Need help?Product details,page 24


FlexFrame



Standard Includes Required to Specify• Inner vertical frame, 8043 Clear Anodized Aluminum• Attachment hardware

Style number



Tip: Height of inner vertical frame pieces must coincide with height of workwall perimeter frame.

Tip: Spacer brackets are shipped with workwall perimeter frame to provide accurate spacing for inner vertical frame pieces.

Tip: Number of inner verti-cal frame pieces needed is determined during speci -cation of con gurations for workwall perimeter frame.

Speci cation InformationDDimensions DStyle DU.S.dD W H dNumber dPriced d d

For Use with 225/8"H Workwall Perimeter Frames31 8" 7 8" 219 16" FFVF21 $333 d d d






Options U.S. Price Required to SpecifySurface • Wood group 2 Prices below Specify wood color number.Materials • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.

Wire • Delete wire management No cost Specify with no cut-out.Management cut-outCut-Out

LED Lights • One shelf with lights Prices below Specify with 1 shelf with lights. • Two shelves with lights Prices below Specify with 2 shelves with lights.

Related • Skins for shelves c�Page 96Products • Wire management c�Page 102 cut-out cover

Speci cation InformationDDimensions DStyle DU.S. DOptionsdD W H dNumber dBase d(Add $ tod d dPrices� dBase Price)d d d dd d d dWood dOne dTwo d d dLPL dWood dWood dWood dShelf dShelvesd d d dGroup 1 dGroup 2 dGroup 3 dWith dWithd d d d d d dLights dLightsd d d d d d d d

123 4" 231 16" 81 4" FFSH12238C $542 $ 753 +$ 50 +$176 +$278 +$556

123 4" 291 16" 81 4" FFSH12298C $574 $ 794 +$ 74 +$260 +$310 +$620

123 4" 351 16" 81 4" FFSH12358C $603 $ 835 +$ 74 +$260 +$345 +$690d d d d d d d d

123 4" 231 16" 161 2" FFSH122316C $618 $ 855 +$ 50 +$176 +$278 +$556

123 4" 291 16" 161 2" FFSH122916C $652 $ 899 +$ 74 +$260 +$310 +$620

123 4" 351 16" 161 2" FFSH123516C $677 $ 937 +$ 74 +$260 +$345 +$690d d d d d d d d

19" 231 16" 81 4" FFSH19238C $644 $ 890 +$ 74 +$260 +$278 +$556

19" 291 16" 81 4" FFSH19298C $673 $ 932 +$ 74 +$260 +$310 +$620

19" 351 16" 81 4" FFSH19358C $704 $ 973 +$103 +$360 +$345 +$690d d d d d d d d

19" 231 16" 161 2" FFSH192316C $720 $ 994 +$ 74 +$260 +$278 +$556

19" 291 16" 161 2" FFSH192916C $750 $1036 +$ 74 +$260 +$310 +$620

19" 351 16" 161 2" FFSH193516C $778 $1076 +$103 +$360 +$345 +$690d d d d d d d d


Standard Includes Required to Specify• Shelf: Low-Pressure Laminate or wood group 1• Blades: painted metal• Wire management cut-out

FlexFrame

Double Shelves



Double Shelves

Tip: Skins can be applied between upper and lower shelves. Specify skins for use with double shelves.

Tip: Shelves are assembled in the eld.

Tip: Specify a wire cut-out cover when a skin is not speci ed above the top shelf and between the shelves.

Sh

elve

s, Bin

s, an

d

Dra

we

rs

1 Style number2 Finish color number for shelf3 Paint color number for blades4 Options, if selected (see below)c�See Surface Materials, page 122.




Standard Includes Required to Specify• Shelf: Low-Pressure Laminate or wood group 1• Blades: painted metal• Wire management cut-out

FlexFrame

Single Shelves



Tip: Shelves are assembled in the eld.

Tip: A light kit must be speci-ed when ordering lights.

Tip: Skins can be applied directly below shelf. Specify skin for use with single shelf.

Tip: Specify a wire cut-out cover when a skin is not speci ed above the shelf.

Options U.S. Price Required to SpecifySurface • Wood group 2 Prices below and at right Specify wood color number.Materials • Wood group 3 Prices below and at right Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.

Wire • Delete wire management No cost Specify with no cut-out.Management cut-outCut-out

LED Lights • One shelf with lights Prices below and at right Specify with 1 shelf with lights.


Speci cation InformationDDimensions DStyle DU.S. DOptionsdD W H dNumber dBase d(Add $ tod d dPrices dBase Price)d d d dd d d dWood dOne Shelfd d dLPL dWood dWood Wood dWith Lightsd d d dGroup 1 dGroup 2 Group 3 dd d d d d d

Upper Shelves123 4" 231 16" 81 4" FFSH12238U $284 $393 +$30 +$101 +$278

123 4" 291 16" 81 4" FFSH12298U $298 $415 +$30 +$101 +$310

123 4" 351 16" 81 4" FFSH12358U $315 $437 +$50 +$176 +$345

123 4 " 231 16" 161 2" FFSH122316U $308 $427 +$30 +$101 +$278

123 4" 291 16" 161 2" FFSH122916U $323 $448 +$30 +$101 +$310

123 4" 351 16" 161 2" FFSH123516U $340 $470 +$50 +$176 +$345

19" 231 16" 81 4" FFSH19238U $333 $462 +$50 +$176 +$278

19" 291 16" 81 4" FFSH19298U $350 $484 +$50 +$176 +$310

19" 351 16" 81 4" FFSH19358U $364 $503 +$50 +$176 +$345

19" 231 16" 161 2" FFSH192316U $359 $496 +$50 +$176 +$278

19" 291 16" 161 2" FFSH192916U $373 $517 +$50 +$176 +$310

19" 351 16" 161 2" FFSH193516U $391 $539 +$50 +$176 +$345d d d d d d d

cSpeci cation Information, continued on next page

1 Style number2 Finish color number for shelf3 Paint color number for blades4 Options, if selected (see below)c�See Surface Materials, page 122.




FlexFrame

Single Shelves

cSpeci cation Information, continued from previous page



Tip: Skins can be applied directly above shelf. Specify skin for use with single shelf.

Sh

elve

s, Bin

s, an

d

Dra

we

rs


Lower Shelves123 4" 231 16" 81 4" FFSH12238W $284 $393 +$30 +$101 +$278

123 4" 291 16" 81 4" FFSH12298W $298 $415 +$30 +$101 +$310

123 4" 351 16" 81 4" FFSH12358W $315 $437 +$50 +$176 +$345

123 4" 231 16" 161 2" FFSH122316W $308 $427 +$30 +$101 +$278

123 4" 291 16" 161 2" FFSH122916W $323 $448 +$30 +$101 +$310

123 4" 351 16" 161 2" FFSH123516W $340 $470 +$50 +$176 +$345

19" 231 16" 81 4" FFSH19238W $333 $462 +$50 +$176 +$278

19" 291 16" 81 4" FFSH19298W $350 $484 +$50 +$176 +$310

19" 351 16" 81 4" FFSH19358W $364 $503 +$50 +$176 +$345

19" 231 16" 161 2" FFSH192316W $359 $496 +$50 +$176 +$278

19" 291 16" 161 2" FFSH192916W $373 $517 +$50 +$176 +$310

19" 351 16" 161 2" FFSH193516W $391 $539 +$50 +$176 +$345d d d d d d d


Standard Includes Required to Specify• Bins or drawers: Low-Pressure Laminate or wood group 1• Pull: painted metal• Blades: painted metal

FlexFrame

Bins and Drawers


Tip: A light kit must be speci-ed when ordering lights.

Tip: Skins can be used in a bin. Specify skin for use with bin.

Tip: Specify a cable man-agement skin when putting receptacles behind a bin.

Tip: Specify a wire cut-out cover when a skin is not speci ed above the shelf.

Tip: Receptacle kits can not be used behind a drawer.

Required SelectionsPull Shape

Jazz NileBar Contemporary HandleFlush

Options U.S. Price Required to SpecifySurface • Wood group 2 Prices below Specify wood color number.Materials • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.

Wood Veneer • Horizontal grain direction No cost Specify with horizontal application.Grain Direction on fronts • Vertical grain direction No cost Specify with vertical application. on fronts

Wire • Delete wire management No cost Specify with no cut-out.Management cut-outCut-out

LED Lights • One shelf light Prices below Specify with 1 shelf with lights.



Bins19" 231 16" 161 2" FFSH192316B $1192 $1649 +$ 74 +$260 +$278

19" 291 16" 161 2" FFSH192916B $1219 $1690 +$103 +$360 +$310

19" 351 16" 161 2" FFSH193516B $1254 $1732 +$134 +$468 +$345d d d d d d d

Drawers19" 231 16" 81 4" FFSH19238D $ 744 $1030 +$ 50 +$176 +$278

19" 291 16" 81 4" FFSH19298D $ 772 $1069 +$ 74 +$260 +$310

19" 351 16" 81 4" FFSH19358D $ 804 $1111 +$ 74 +$260 +$345d d d d d d d

1 Style number2 Finish color number for shelf3 Paint color number for blades4 Pull shape (see below under required

selections)5 Finish color number for pull c�See Surface Materials, page 122.



FlexFrame


Bins and Drawers

Sh

elve

s, Bin

s, an

d

Dra

we

rs



Standard Includes Required to Specify• Skin: fabric, Low-Pressure Laminate, glass, or

wood group 1• Blades: painted metal

FlexFrame

Skins



Tip: These skins are not for use with shelves and bins. See skins for shelves and bins to specify, page 96.

Tip: Skins come standard with blades.

Options U.S. Price Required to SpecifySurface Horizontal or vertical No cost Specify with horizontal or vertical Materials application application. • Fabric price group A No cost Specify fabric color number. • Fabric price group 1 No cost Specify fabric color number. • Fabric price group 2 +$ 29 Specify fabric color number. • Fabric price group 3 +$ 50 Specify fabric color number. • Fabric price group 4 +$ 81 Specify fabric color number. • Fabric price group 5 +$126 Specify fabric color number. • Fabric price group 6 +$173 Specify fabric color number. • Fabric price group 7 +$218 Specify fabric color number. • Fabric price group COM +$ 16 Specify fabric color number. • Wood group 2 Prices at right Specify wood color number. • Wood group 3 Prices at right Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.

Wood Veneer • Horizontal grain direction No cost Specify with horizontal application.Grain Direction • Vertical grain direction No cost Specify with vertical application.

Power Unit • Data Power Power No cost Specify with Data/Power/Power.Con guration • Data Power Switch No cost Specify with Data/Power/Switch.On TechnologySkins

Power Unit • Corded No cost Specify with corded.Type on • Hardwire No cost Specify with hardwire.Technology • Modular No cost Specify with modular.Skins

1 Style number2 Finish color number for skin3 Paint color number for blades4 Power unit configuration on technology

skins, if selected5 Power unit type on technology skins, if

selected6 Options, if selected (see below)c�See Surface Materials, page 122.




FlexFrame

Skins



Sk

ins

Speci cation InformationDDimensions DStyle DU.S. DOptionsdW H dNumber dBase d(Add $ tod d dPrices dBase Price)d d d dd d d dWood d d dFabric dLPL dWood dGlass dWood dWood d d d d dGroup 1 d dGroup 2 dGroup 3 d d d d d d d d

81/4" High Skins231 16" 81 4" FFKK238 $269 $288 $398 N.A. +$ 59 +$211

291 16" 81 4" FFKK298 $278 $296 $410 N.A. +$ 59 +$211

351 16" 81 4" FFKK358 $288 $306 $424 N.A. +$ 59 +$211 d d d d d d d d

161/2" High Skins231 16" 161 2" FFKK2316 $299 $317 $439 N.A. +$ 59 +$211

291 16" 161 2" FFKK2916 $306 $327 $452 N.A. +$ 59 +$211

351 16" 161 2" FFKK3516 $317 $337 $466 N.A. +$ 59 +$211 d d d d d d d d

33" High Skins231 16" 33" FFKK2333 $324 $346 $478 $ 862 +$100 +$353

291 16" 33" FFKK2933 $336 $360 $496 $ 936 +$100 +$353

351 16" 33" FFKK3533 $342 $368 $508 $ 998 +$100 +$353 d d d d d d d d

491/2" High Skins231 16" 491 2" FFKK2349 $351 $375 $519 $1021 +$100 +$353

291 16" 491 2" FFKK2949 $362 $388 $535 $1088 +$100 +$353

351 16" 491 2" FFKK3549 $373 $400 $551 $1228 +$100 +$353 d d d d d d d d

Technology Skins231 16" 161 2" FFKK2316T $714 $732 $854 N.A. +$ 59 +$211

291 16" 161 2" FFKK2916T $721 $742 $867 N.A. +$ 59 +$211

351 16" 161 2" FFKK3516T $732 $752 $881 N.A. +$ 59 +$211 d d d d d d d d

Cable Management Skins231 16" 161 2" FFKK2316M $437 $455 $577 N.A. +$ 59 +$211

291 16" 161 2" FFKK2916M $444 $465 $590 N.A. +$ 59 +$211

351 16" 161 2" FFKK3516M $455 $475 $604 N.A. +$ 59 +$211 d d d d d d d d



Standard Includes Required to Specify• Skin: fabric, Low-Pressure Laminate, glass, or

wood group 1• Blades: painted metal

FlexFrame

Skins For Shelves and Bins



Tip: These skins are only for use with shelves and bins.

Tip: Skins do not have blades. Blades are standard on shelves and bins.

Options U.S. Price Required to SpecifySurface Horizontal or vertical No cost Specify with horizontal or vertical Materials application application. • Fabric price group A No cost Specify fabric color number. • Fabric price group 1 No cost Specify fabric color number. • Fabric price group 2 +$ 29 Specify fabric color number. • Fabric price group 3 +$ 50 Specify fabric color number. • Fabric price group 4 +$ 81 Specify fabric color number. • Fabric price group 5 +$126 Specify fabric color number. • Fabric price group 6 +$173 Specify fabric color number. • Fabric price group 7 +$218 Specify fabric color number. • Fabric price group COM +$ 16 Specify fabric color number. • Wood group 2 Prices below Specify wood color number. and at right • Wood group 3 Prices below Specify wood color number. and at right • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.


Power Unit • Data Power Power No cost Specify with Data/Power/Power.Con guration • Data Power Switch No cost Specify with Data/Power/Switch.On TechnologySkins

Power Unit • Corded No cost Specify with corded.Type on • Hardwire No cost Specify with hardwire.Technology • Modular No cost Specify with modular.Skins

Speci cation InformationDDimensions DStyle DU.S. DOptionsdW H dNumber dBase d(Add $ tod d dPrices dBase Price)d d d dd d d dWood d d dFabric dLPL dWood dWood dWood d d d d dGroup 1 dGroup 2 dGroup 3 d d d d d d d

Skins For 81/4"H Double Shelves2211 16" 53 4" FFKD225 $214 $233 $343 +$59 +$211

2811 16" 53 4" FFKD285 $223 $241 $355 +$59 +$211

3411 16" 53 4" FFKD345 $233 $251 $369 +$59 +$211 d d d d d d d


1 Style number2 Finish color number for skin3 Paint color number for blades4 Power unit configuration on technology

skins, if selected5 Power unit type on technology skins, if

selected6 Options, if selected (see below)c�See Surface Materials, page 122.



FlexFrame Speci cation Guide cSkins For Shelves and Bins, continued 97

FlexFrame

Skins For Shelves and Bins




Sk

ins


Skins For 161/2"H Double Shelves2211 16" 14" FFKD2214 $244 $262 $384 +$59 +$211

2811 16" 14" FFKD2814 $251 $272 $397 +$59 +$211

3411 16" 14" FFKD3414 $262 $282 $411 +$59 +$211 d d d d d d d

Technology Skins For 161/2"H Double Shelves2211 16" 14" FFKD2214T $659 $677 $799 +$59 +$211

2811 16" 14" FFKD2814T $666 $687 $812 +$59 +$211

3411 16" 14" FFKD3414T $677 $697 $826 +$59 +$211 d d d d d d d

Cable Management Skins For 161/2"H Double Shelves2211 16" 14" FFKD2214M $382 $400 $522 +$59 +$211

2811 16" 14" FFKD2814M $389 $410 $535 +$59 +$211

3411 16" 14" FFKD3414M $400 $420 $549 +$59 +$211 d d d d d d d

Skins For 81/4"H Single Shelves2211 16" 7" FFKS227 $214 $233 $343 +$59 +$211

2811 16" 7" FFKS287 $223 $241 $355 +$59 +$211

3411 16" 7" FFKS347 $233 $251 $369 +$59 +$211 d d d d d d d

Skins For 161/2"H Single Shelves2211 16" 151 4" FFKS2215 $244 $262 $384 +$59 +$211

2811 16" 151 4" FFKS2815 $251 $272 $397 +$59 +$211

3411 16" 151 4" FFKS3415 $262 $282 $411 +$59 +$211 d d d d d d d

Technology Skins For 161/2"H Single Shelves2211 16" 151 4" FFKS2215T $659 $677 $799 +$59 +$211

2811 16" 151 4" FFKS2815T $666 $687 $812 +$59 +$211

3411 16" 151 4" FFKS3415T $677 $697 $826 +$59 +$211 d d d d d d d

Cable Management Skins For 161/2"H Single Shelves2211 16" 151 4" FFKS2215M $382 $400 $522 +$59 +$211

2811 16" 151 4" FFKS2815M $389 $410 $535 +$59 +$211

3411 16" 151 4" FFKS3415M $400 $420 $549 +$59 +$211 d d d d d d d



FlexFrame

Skins For Shelves and Bins, continued






Skins For Bins2211 16" 14" FFKB2214 $244 $262 $384 +$59 +$211

2811 16" 14" FFKB2814 $251 $272 $397 +$59 +$211

3411 16" 14" FFKB3414 $262 $282 $411 +$59 +$211 d d d d d d d

Cable Management Skins For Bins2211 16" 14" FFKB2214M $383 $401 $523 +$59 +$211

2811 16" 14" FFKB2814M $391 $412 $537 +$59 +$211

3411 16" 14" FFKB3414M $400 $420 $549 +$59 +$211 d d d d d d d

Tip: Skins for bins are set back 1" from front edge of frame. Receptacle kits can not be placed behind skins for bins.

Tip: Specify a cable man-agement skin when placing a receptacle kit behind the bin.



Standard Includes Required to Specify• Skin: fabric, Low-Pressure Laminate, or wood group 1• Blades: painted metal

FlexFrame

TV Skins TV Skins

Tip: TV attachment skins support monitors up to 65" and up to 200 pounds.

Sk

ins

Options U.S. Price Required to SpecifySurface Horizontal or vertical No cost Specify with horizontal or vertical Materials application application. • Fabric price group A No cost Specify fabric color number. • Fabric price group 1 No cost Specify fabric color number. • Fabric price group 2 +$ 29 Specify fabric color number. • Fabric price group 3 +$ 50 Specify fabric color number. • Fabric price group 4 +$ 81 Specify fabric color number. • Fabric price group 5 +$ 126 Specify fabric color number. • Fabric price group 6 +$ 173 Specify fabric color number. • Fabric price group 7 +$ 218 Specify fabric color number. • Fabric price group COM +$ 16 Specify fabric color number. • Wood group 2 Prices below Specify wood color number. • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c�See Surface Materials Reference Manual.


Brackets with • Bracket for 32" or No cost Specify with small bracket.No Shroud smaller monitor • Bracket for larger No cost Specify with large bracket. than 32" monitor

Brackets with • 32"s shroud +$1704 Specify with 32" shroud.Shroud • 42" shroud +$2014 Specify with 42" shroud. • 46" shroud +$2181 Specify with 46" shroud. • 55" shroud +$2553 Specify with 55" shroud. • 65" shroud +$2968 Specify with 65" shroud.

Speci cation InformationDDimensions DStyle DU.S. DOptionsdW H dNumber dBase d(Add $ tod d dPrices dBase Price)d d d dd d d dWood d d dFabric dLPL dWood dWood dWood d d d d dGroup 1 dGroup 2 dGroup 3d d d d d d d

TV Attachment Skins — Centered Application231 16" 33" FFKT2333C $463 $485 $ 617 +$100 +$353

291 16" 33" FFKT2933C $473 $497 $ 633 +$100 +$353

351 16" 33" FFKT3533C $481 $507 $ 647 +$100 +$353 d d d d d d d

TV Attachment Skins, Pair — Spanning Application231 16" 33" FFKT2333S $788 $833 $1098 +$148 +$522

291 16" 33" FFKT2933S $806 $853 $1126 +$148 +$522

351 16" 33" FFKT3533S $826 $871 $1153 +$148 +$522 d d d d d d d

1 Style number2 Finish color number for skin3 Paint color number for blades4 Options, if selected (see below)c�See Surface Materials, page 122.






FlexFrame

Worksurface Attachment Skins G10/19

Standard Includes Required to Specify• Skin: wood group 1, Low-Pressure Laminate, or fabric • Brackets: painted metal


Options U.S. Price Required to SpecifySurface Horizontal or vertical No cost Specify with horizontal or verticalMaterials application application. • Fabric price group A No cost Specify fabric color number. • Fabric price group 1 No cost Specify fabric color number. • Fabric price group 2 +$ 29 Specify fabric color number. • Fabric price group 3 +$ 50 Specify fabric color number. • Fabric price group 4 +$ 81 Specify fabric color number. • Fabric price group 5 +$126 Specify fabric color number. • Fabric price group 6 +$173 Specify fabric color number. • Fabric price group 7 +$218 Specify fabric color number. • Fabric price group COM +$ 16 c See Surface Materials Reference Manual. • Wood group 2 Prices below Specify wood color number. • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 No cost Specify full- ll nish number.

Wood Veneer • Horizontal grain direction No cost Specify with horizontal grain direction.Grain Direction • Vertical grain direction No cost Specify with vertical grain direction.

Speci cation InformationDDimensions DStyle DU.S. Base DOptionsdW H dNumber dPrices d(Add $ tod d d dBase Price)d d d dd d d dWoodd d dFabric dLPL dWood dWood dWoodd d d d dGroup 1 dGroup 2 dGroup 3d d d d d d d

231 16" 81 4" FFKW238 G10/19 $558 $577 $687 +$59 +$211

291 16" 81 4" FFKW298 G10/19 $571 $589 $703 +$59 +$211

351 16" 81 4" FFKW358 G10/19 $584 $602 $720 +$59 +$211 d d d d d d d

1 Style number2 Finish color number for skin3 Paint color number for brackets4 Options, if selected (see below)c�See Surface Materials, page 122.

G10/19 = Last order entryOctober 20, 2019





FlexFrame

Cantilever Desk and Tables Attachment Skins G10/19

Cantilever Desk and Tables Attachment Skins

Standard Includes Required to Specify• Skin: fabric, Low-Pressure Laminate, or wood group 1• Brackets: painted metal

Sk

ins


Options U.S. Price Required to SpecifySurface Horizontal or vertical No cost Specify with horizontal or verticalMaterials application application. • Fabric price group A No cost Specify fabric color number. • Fabric price group 1 No cost Specify fabric color number. • Fabric price group 2 +$ 29 Specify fabric color number. • Fabric price group 3 +$ 50 Specify fabric color number. • Fabric price group 4 +$ 81 Specify fabric color number. • Fabric price group 5 +$126 Specify fabric color number. • Fabric price group 6 +$173 Specify fabric color number. • Fabric price group 7 +$218 Specify fabric color number. • Fabric price group COM +$ 16 c See Surface Materials Reference Manual. • Wood group 2 Prices below Specify wood color number. • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 No cost Specify full- ll nish number.

Wood Veneer • Horizontal grain direction No cost Specify with horizontal grain direction.Grain Direction • Vertical grain direction No cost Specify with vertical grain direction.

Speci cation InformationDDimensions DStyle DU.S. Base DOptionsdW H dNumber dPrices d(Add $ tod d d dBase Price)d d d dd d d dWoodd d dFabric dLPL dWood dWood dWoodd d d d dGroup 1 dGroup 2 dGroup 3d d d d d d d

Left-Hand Cantilever Desk Attachment Skin351 16" 243 4" FFKQ3524L G10/19 $ 607 $ 625 $ 739 +$100 +$353d d d d d d d

Right-Hand Cantilever Desk Attachment Skin351 16" 243 4" FFKQ3524R G10/19 $ 607 $ 625 $ 739 +$100 +$353 d d d d d d d

Skin Pair - Cantilever Table Attachment231 16" 243 4" FFKC2324 G10/19 $1196 $1229 $1429 +$100 +$353

291 16" 243 4" FFKC2924 G10/19 $1225 $1256 $1464 +$100 +$353

351 16" 243 4" FFKC3524 G10/19 $1257 $1287 $1501 +$100 +$353 d d d d d d d

1 Style number2 Finish color number for skin3 Paint color number for brackets4 Options, if selected (see below)c�See Surface Materials, page 122.




FlexFrame

Accessories

Standard Includes Required to Specify• Wire cut-out cover: paint



Wire Management Cut-out Cover

Standard Includes Required to Specify• Top cap: paint

Top Caps

Speci cation InformationDDimensions DStyle DU.S.dD W dNumber dPriced d d

31 8" 231 16" FFAT23 $ 96

31 8" 291 16" FFAT29 $104

31 8" 351 16" FFAT35 $110d d d

1 Style number2 Paint color number for top capc�See Surface Materials, page 122.


Speci cation InformationDDimensions DStyle DU.S.dD W H dNumber dPriced d d

11 8" 37 8" 11 8" FFAC $55 d d d

1 Style number2 Paint color number for coverc�See Surface Materials, page 122.



FlexFrame Speci cation Guide cElectrical, continued 103

Ele

ctric

al

Standard Includes Required to Specify• Non-PVC modular harness Style number

FlexFrame

Electrical



Modular Harnesses

Standard Includes Required to Specify• (2) duplex receptacles for Line 1: 6000 Black Style number

1-Circuit Receptacle Kit

Electrical

Tip: Specify a base power tray when using a receptacle kit.

Speci cation InformationDDimensions DStyle DU.S.dW dNumber dPriced d d

113 4" FFVR1 $83d d d



24" FFVH24 $206

30" FFVH30 $210

36" FFVH36 $214

42" FFVH42 $218

48" FFVH48 $225

54" FFVH54 $229

60" FFVH60 $233

66" FFVH66 $237

72" FFVH72 $241

78" FFVH78 $244

84" FFVH84 $249

90" FFVH90 $253

96" FFVH96 $256

102" FFVH102 $260

108" FFVH108 $264

114" FFVH114 $269

120" FFVH120 $275 d d d




Standard Includes Required to Specify• (1) duplex receptacle for Line 1 and (1) duplex receptacle

for Line 2: 6000 Black Style number

2-Circuit Receptacle Kit

Standard Includes Required to Specify• 1-circuit or 2-circuit hardwired, base power-in, 94" long x

3 8" diameter exible galvanized steel conduit• Male modular connector

Style number

Hardwire Power Infeed

Standard Includes Required to Specify• Metal: 7237 Slate Style number

FlexFrame

Electrical, continued



Tip: Specify a base power tray when using a receptacle kit.

Tip: For designation of con-trolled receptacles, order permanent ink stamp with controlled icon; service part (1063909001SR). It includes a pair of stamps, one white and one black. Appropriate receptacles can be stamped at the job site during installation.

Workwall Base Trays

Speci cation InformationDDimensions DStyle DU.S.dW dNumber dPriced d d231 16" FFVT23 $ 96

291 16" FFVT29 $104

351 16" FFVT35 $110d d d



94" FFVIH $138d d d



113 4" FFVR2 $104d d d




FlexFrame

Electrical



Standard Includes Required to Specify• Metal: 7237 Slate• Attachment hardware

Style number

Workwall Wire Managers

Ele

ctric

al


231 16" FFAA23 $68

291 16" FFAA29 $77

351 16" FFAA35 $83d d d




Standard Includes Required to Specify• 30-watt light kit: one power transformer, one switch, and

one terminal block• 60-watt light kit: two power transformers, one switch, and

two terminal blocks

Style number

FlexFrame

Lighting

Tip: A light kit or light dim-ming kit must be speci ed when ordering lights on shelves, bins, or drawers.

Tip: Specify a technology skin when using light kits.

Light Kits

Standard Includes Required to Specify• 30-watt light dimming kit: one power transformer, one

switch, one terminal block, and one dimming module• 60-watt light dimming kit: two power transformers, one

switch, two terminal blocks, and one dimming module

Style number

Tip: A light kit or dimming kit must be speci ed when ordering lights on shelves, bins, or drawers.

Tip: Specify a technology skin when using light kits.

Light Dimming Kits



Speci cation InformationDStyle DU.S.dNumber dPriced d

30 Watt Light Dimming KitFFLD30 $345 d d

60 Watt Light Dimming KitFFLD60 $690 d d



30 Watt Light KitFFLK30 $310 d d

60 Watt Light KitFFLK60 $448 d d




FlexFrame

Lighting



Standard Includes Required to Specify• One power transformer, one remote control and receiver,

and terminal block Style number

30-Watt Remote Control Light Kit with Dimmer

Lig

htin

g


FFLK30E $484 d d




FlexFrame

Cantilever Desks G10/19

Standard Includes Required to Specify• Worksurface: wood group 1 veneer or laminate

price group 1• Plastic edge on laminate worksurface, if selected• TechBox: wood veneer or laminate price group 1• Grommet: paint

Options U.S. Price Required to SpecifySurface Wood veneer worksurfaceMaterials • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 +$103 Specify full- ll nish number. • Wood group 2 +$103 Specify wood color number. • Wood group 3 +$362 Specify wood color number.

Laminate worksurface • Laminate price group 1 –$482 Specify laminate color number. worksurface • Laminate price group 2 See information to left Specify laminate color number. worksurface • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate

Wood veneer TechBox • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Wood group 2 +$ 74 Specify wood color number. • Wood group 3 +$258 Specify wood color number.

Laminate TechBox • Laminate price group 1 –$489 Specify with laminate TechBox and TechBox specify nish number. • Laminate price group 2 See information to left Specify with laminate TechBox and TechBox specify nish number. • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate

Wood Veneer • Horizontal grain direction No cost Specify with horizontal application.Grain Direction on TechBox on TechBox • Vertical grain direction No cost Specify with vertical application. on TechBox

Power Unit • Corded No cost Specify with corded.Type • Hardwired No cost Specify with hardwired. • Modular No cost Specify with modular.

For laminate price group 2 pricing, please refer to the electronic cata-log or SmartTools.



Tip: Cantilever desks are not approved to be freestanding.

Tip: Cantilever desks con-nect to FlexFrame workwall using attachment skins and cannot be attached directly to drywall.


1 Style number2 Wood or laminate color number for

worksurface3 Plastic edge for laminate worksurface, if

selected4 Wood or laminate color number for

TechBox, and grain direction on wood, if selected

5 Finish color for grommet6 Power unit type7 Options, if selected (see below)cSee Surface Materials, page 122.




FlexFrame



Cantilever Desks

Ca

ntile

ver D

esk

s a

nd

Ta

ble

s

Speci cation InformationDDimensions DStyle DU.S. BasedD W H dNumber dPriced d d

Left-Hand Desks36" 72" 291 2" FFDC3672L G10/19 $6245

36" 78" 291 2" FFDC3678L G10/19 $6346

36" 84" 291 2" FFDC3684L G10/19 $6625

36" 90" 291 2" FFDC3690L G10/19 $6917d d d

Right-Hand Desks36" 72" 291 2" FFDC3672R G10/19 $6245

36" 78" 291 2" FFDC3678R G10/19 $6346

36" 84" 291 2" FFDC3684R G10/19 $6625

36" 90" 291 2" FFDC3690R G10/19 $6917d d d






FlexFrame

Cantilever Desks with media:scape G10/19


price group 1• Plastic edge on laminate worksurface, if selected• TechBox: wood veneer or laminate price group 1• Grommet: paint• media:scape with 3 PUCKs

Required Selections U.S. Price Required to SpecifyMaintenance • One year +$ 714 Specify with one year maintenance Agreement agreement. • Two years +$1285 Specify with two year maintenance agreement. • Three years +$1821 Specify with three year maintenance agreement. • Four years +$1999 Specify with four year maintenance agreement.

Options U.S. Price Required to SpecifySurface Wood veneer worksurfaceMaterials • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 +$ 103 Specify full- ll nish number. • Wood group 2 +$ 103 Specify wood color number. • Wood group 3 +$ 362 Specify wood color number.

Laminate worksurface • Laminate price group 1 –$ 482 Specify laminate color number. worksurface • Laminate price group 2 See information to left Specify laminate color number. worksurface • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate

Wood veneer TechBox • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Wood group 2 +$ 74 Specify wood color number. • Wood group 3 +$ 258 Specify wood color number.

Laminate TechBox • Laminate price group 1 –$ 489 Specify with laminate TechBox and TechBox specify nish number. • Laminate price group 2 See information to left Specify with laminate TechBox and TechBox specify nish number. • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate



cOptions, continued on next page


Tip: Cantilever desks are not approved to be freestanding.

Tip: Cantilever desks con-nect to FlexFrame workwall using attachment skins and cannot be attached directly to drywall.






5 Finish color for grommet6 Power unit type7 PUCK option8 Maintenance agreement (see below

under Required Selections)9 Options, if selected (see below)cSee Surface Materials, page 122.




FlexFrame



Cantilever Desks with media:scape

Options U.S. Price Required to SpecifyPUCKs • PUCK 1 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK. • PUCK 2 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK. • PUCK 3 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK.

Speci cation InformationDDimensions DStyle DU.S. BasedD W H dNumber dPriced d d

Left-Hand Desks36" 72" 291 2" FFDD3672L G10/19 $19,377

36" 78" 291 2" FFDD3678L G10/19 $19,478

36" 84" 291 2" FFDD3684L G10/19 $19,757

36" 90" 291 2" FFDD3690L G10/19 $20,049d d d

Right-Hand Desks36" 72" 291 2" FFDD3672R G10/19 $19,377

36" 78" 291 2" FFDD3678R G10/19 $19,478

36" 84" 291 2" FFDD3684R G10/19 $19,757

36" 90" 291 2" FFDD3690R G10/19 $20,049d d d

cOptions, continued from previous next page

Ca

ntile

ver D

esk

s a

nd

Ta

ble

s






FlexFrame

Cantilever Tables G10/19


price group 1• Plastic edge on laminate worksurface, if selected• TechBox: wood group 1 veneer or laminate price

group 1• Grommet: paint

Tip: Cantilever tables are not approved to be freestanding.

Tip: Cantilever tables con-nect to FlexFrame workwall using attachment skins and cannot be attached directly to drywall.


Options U.S. Price Required to SpecifySurface Wood veneer worksurfaceMaterials • Wood group 2 Prices below Specify wood color number. • Wood group 3 Prices below Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 Prices below Specify full- ll nish number.

Laminate worksurface • Laminate price group 1 –$482 Specify laminate color number. worksurface • Laminate price group 2 See information to left Specify laminate color number. worksurface • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate

Wood veneer TechBox • Wood group 2 +$ 74 Specify wood color number. • Wood group 3 +$258 Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual.

Laminate TechBox • Laminate price group 1 –$489 Specify with laminate TechBox and TechBox specify nish number. • Laminate price group 2 See information to left Specify with laminate TechBox and TechBox specify nish number. • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate



Speci cation InformationDDimensions DStyle DU.S. DOptionsdD W H dNumber dBase d(Add $ tod d dPrice dBase Price)d d d dd d d dWoodd d d dWood dWood dFull-Fill d d d dGroup 2 dGroup 3 dFinish ond d d d d dWoodd d d d d dGroup 1

48" 72" 291 2" FFTC4872 G10/19 $6799 +$134 +$467 +$134

48" 90" 291 2" FFTC4890 G10/19 $7623 +$134 +$467 +$156d d d d d d






5 Finish color for grommet6 Power unit type7 Options, if selected (see below)cSee Surface Materials, page 122.




FlexFrame

Cantilever Tables

Ca

ntile

ver D

esk

s a

nd

Ta

ble

s





FlexFrame

Cantilever Tables with media:scape G10/19


price group 1• Plastic edge on laminate worksurface, if selected• TechBox: wood group 1 veneer or laminate price

group 1• Grommet: paint• media:scape with 3 PUCKs

Required Selections U.S. Price Required to Specify • One year +$ 714 Specify with one year maintenance agreement. • Two years +$1285 Specify with two year maintenance agreement. • Three years +$1821 Specify with three year maintenance agreement. • Four years +$1999 Specify with four year maintenance agreement.

Options U.S. Price Required to SpecifySurface Wood veneer worksurfaceMaterials • Wood group 2 Prices at right Specify wood color number. • Wood group 3 Prices at right Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual. • Full- ll nish on wood group 1 Prices at right Specify full- ll nish number.

Laminate worksurface • Laminate price group 1 –$ 482 Specify laminate color number. worksurface • Laminate price group 2 See information to left Specify laminate color number. worksurface • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate

Wood veneer TechBox • Wood group 2 +$ 74 Specify wood color number. • Wood group 3 +$ 258 Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual.

Laminate TechBox • Laminate price group 1 –$ 489 Specify with laminate TechBox and TechBox specify nish number. • Laminate price group 2 See information to left Specify with laminate TechBox and TechBox specify nish number. • Open Line laminate +$ 74 c See Surface Materials Reference Manual. plus cost of laminate



cOptions, continued on next page

Tip: Cantilever tables are not approved to be freestanding.

Tip: Cantilever tables con-nect to FlexFrame workwall using attachment skins and cannot be attached directly to drywall.



worksurface3 Plastic edge for laminate worksurface,

if selected4 Wood or laminate color number for


5 Finish color for grommet6 Power unit type7 PUCK option8 Maintenance agreement (see below

under Required Selections)9 Options, if selected (see below)c�See Surface Materials, page 122.




Options U.S. Price Required to SpecifyPUCKs • PUCK 1 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK. • PUCK 2 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK. • PUCK 3 - VGA No cost Specify with VGA PUCK. - HDMI No cost Specify with HDMI PUCK. - DisplayPort No cost Specify with DisplayPort PUCK. - Mini DisplayPort No cost Specify with Mini DisplayPort PUCK.

Speci cation InformationDDimensions DStyle DU.S. DOptionsdD W H dNumber dBase d(Add $ tod d dPrice dBase Price)d d d dWoodd d d dWood dWood dFull-Fill d d d dGroup 2 dGroup 3 dFinish ond d d d d dWoodd d d d d dGroup 1

48" 72" 291 2" FFTD4872 $19,931 G10/19 +$134 +$467 +$134

48" 90" 291 2" FFTD4890 $20,755 G10/19 +$134 +$467 +$156d d d d d d


FlexFrame



Cantilever Tables with media:scape

cOptions, continued from previous next page

Ca

ntile

ver D

esk

s a

nd

Ta

ble

s




Victor2

Mobile Unit

Standard Includes Required to Specify• Mobile unit: - Front and back: wood group 1 - Sides and top: paint• Finished back hinged doors• Three slot opening with sloped receptacles and built

in bag holding system• Acrylic inserts etched with recycling icons and

wording• Three 100% recycled plastic rigid recycling bins –

12 gallon capacity each• Four non-locking black casters: two swivel / two xed

Tip: Receptacle contains features to accommodate oversized bags.

Tip: Soft-touch integral han-dle allows easy movement from one location to another.

Tip: Acrylic inserts lift out without tools for ease of cleaning and changeability.

Tip: Verbiage on each insert contains English, Spanish, and French.



Required SelectionsAcrylic Inserts (Pick three)

MIXTOS

MIXED

ABONO

COMPOST

MIXTOS

MIXED

BASURA

WASTE

PAPEL

PAPER

RETORNABLE

RETURNABLE

RETORNABLE

RETURNABLE

RETORNABLE

RETURNABLE

Plastic Compost Mixed Waste Paper Aluminum Returnables Glass

Options U.S. Price Required to SpecifySurface Wood front and backMaterials • Wood group 2 +$ 74 Specify wood color number. • Wood group 3 +$258 Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual.

Laminate front and back • Laminate price group 1 –$345 Specify laminate color number. • Laminate price group 2 See information to left Specify laminate color number. • Open Line laminate –$271 c See Surface Materials Reference Manual. plus cost of laminate

Paint on case • Paint price group 1 No cost Specify paint color number. • Paint price group 2 +$ 80 Specify paint color number. • Paint price group 3 +$138 Specify paint color number.

Speci cation InformationDDimensions DStyle DU.S.dD W H dNumber dBased d dPriced d d

Mobile Unit — 3 Openings18" 36" 36" AWRM183636 $4192d d d

1 Style number2 Wood color number for front and back 3 Paint color number for sides and top

(case)4 Three acrylic inserts (see below under

Required Selections)5 Options, if selected (see below)c�See Surface Materials, page 122.





Vic

tor2

Mobile Unit

Victor2



Standard Includes Required to Specify• Freestanding unit: - Front and back: wood group 1 - Side and top: paint• Finished back• Four or ve top slot openings with receptacles• Acrylic inserts etched with recycling icons and

wording• Four or ve recycling bins (capacity of 23 gallon each

receptacle) – ts 30 gallon size bags and larger• Leveling glides: black only

Victor2

Freestanding Units

Tip: Tray shelf and display are ordered separately.

Tip: Acrylic inserts lift out without tools for ease of cleaning and changeability.

Tip: Verbiage on each insert contains English, Spanish, and French.



Required SelectionsAcrylic Inserts (Pick four or ve)

MIXTOS

MIXED

ABONO

COMPOST

MIXTOS

MIXED

BASURA

WASTE

PAPEL

PAPER

RETORNABLE

RETURNABLE

RETORNABLE

RETURNABLE

RETORNABLE

RETURNABLE

Plastic Compost Mixed Waste Paper Aluminum Returnables Glass

Options U.S. Price Required to SpecifySurface Wood front and backMaterials • Wood group 2 Prices at right Specify wood color number. • Wood group 3 Prices at right Specify wood color number. • Customiz stain No cost Specify with Customiz stain. c See Surface Materials Reference Manual.

Laminate front and back • Laminate price group 1 - Four opening –$575 Specify laminate color number. - Five opening –$805 Specify laminate color number. • Laminate price group 2 - Four opening See information to left Specify laminate color number. - Five opening See information to left Specify laminate color number. • Open Line laminate - Four opening –$501 c See Surface Materials Reference Manual. plus cost of laminate - Five opening –$731 c See Surface Materials Reference Manual. plus cost of laminate

Paint on case • Paint price group 1 No cost Specify paint color number. • Paint price group 2 +$ 80 Specify paint color number. • Paint price group 3 +$138 Specify paint color number.

Related • Tray shelf c Page 120Products • Display c Page 120

1 Style number2 Wood color number for front and back 3 Paint color number for sides and top

(case)4 Four or five acrylic inserts (see below

under Required Selections)5 Options, if selected (see below)c�See Surface Materials, page 122.





Victor2

Freestanding Units



Vic

tor2

Speci cation InformationDDimensions DStyle DU.S. DOptionsdD W H dNumber dBase d(Add $ tod d dPrice dBase Price)d d d dd d d dWood d d d dWood front and back d d d d d d d dWood dWood d d d dGroup 2 dGroup 3

Freestanding Unit — 4 Openings25" 48" 36" AWRF254836 $5989 +$134 +$467

Freestanding Unit — 5 Openings25" 60" 36" AWRF256036 $7547 +$169 +$587 d d d d d



Standard Includes Required to Specify• Tray shelf: paint

Victor2

Tray Shelf and Display



Tip: Tray shelf ts most trays up to 203/4" x 12".

Tip: Tray shelf cannot be used with the mobile unit.

Tip: Two tray shelves can be used on the freestanding 4 or 5 slot opening. A 15" gap will separate the two tray shelves if used on the freestanding 5 unit.

Tip: Maximum tray storage is 20 food trays.

Standard Includes Required to Specify• Display• Attachment brackets: paint

Tip: Display holds two 81/2" x 11" papers or one 11" x 17".

Tip: Display cannot be used with the mobile unit.

Tip: Two displays can be used on the freestanding 4 or 5 slot opening. A gap of 181/2" will separate the two displays if used on the Freestanding 5 unit.

Tip: Paper is placed between the two acrylic plates.

Display

Tray Shelf

Options U.S. Price Required to SpecifySurface • Paint price group 1 No cost Specify paint color number. Materials • Paint price group 2 +$11 Specify paint color number. • Paint price group 3 +$25 Specify paint color number.

Related • Freestanding units c Page 118Products


13 16" 203 4" 151 2" AWDR $418d d d

1 Style number2 Paint color number for bracket3 Options, if selected (see below)c�See Surface Materials, page 121.


Options U.S. Price Required to SpecifySurface • Paint price group 1 No cost Specify paint color number. Materials • Paint price group 2 +$11 Specify paint color number. • Paint price group 3 +$25 Specify paint color number.

Related • Freestanding units c Page 118Products


123 4" 221 4" 915 16" AWTS $418d d d

1 Style number2 Paint color number for tray3 Options, if selected (see below)c�See Surface Materials, page 122.



Surface Materials


Su

rfac

e M

ate

rials

Surface Materials 122

Specification Guidelines for Directional Fabrics 126

Wood Veneer Grain and Directional Laminate Application 127


Textured Metallic Paint7246 Midnight Metallic

Applies to:• Shrouds4140 Arctic White Gloss4799 Platinum Metallic4803 Near Black Metallic7245 Midnight Metallic

Laminatec�See Surface Materials Reference Manual for a listing of available laminates for Victor2.

Steelcase SurfacesApplies to:• Shelves, bins, and

drawers• Laminate skins

Low-Pressure LaminatePrice Group 1 247L Black V2 LPL24L0 Graphite Walnut LPL25L1 Winter on Maple LPL25L5 Virginia Walnut LPL25L6 Blackwood LPL25L8 Clear Walnut LPL25L9 Warm Oak LPL E262L Marbled Maple LPL264L Chocolate Walnut

LPL267L Marbled Cherry V2

LPL26L1 Natural Cherry V2

LPL275L Warm White LPL E2L03 Brushed Silver LPL E2L09 Clear Maple LPL2L30 Arctic White LPL2L50 Vanadium Fiber LPL2L52 Tungsten Fiber LPL2L83 Seagull LPL2L84 Milk LPL2L85 Dune LPL2LAN Ash Noce LPL2LAW Ash Wenge LPL2LBN Bisque Noce LPL2LBW Bisque Wenge LPL2LCN Clay Noce LPL2LCW Clay Wenge LPL2LMG Merle LPL2LSN Storm Noce LPL2LSW Storm Wenge LPL

Tip: Some wood veneer nishes and woodgrain laminates share the same name. Because of the difference in materials, veneers and laminates of the same name are not an exact match but do coordinate with each other.

Applies to:• Cantilever desks and

tables

Steelcase SurfacesHigh-Pressure LaminatePrice Group 1

Fiber Laminate2850 Vanadium Fiber2851 Rhyme Fiber E2852 Tungsten Fiber2854 Vellum Fiber2859 Novell Fiber2860 Granite Fiber2861 Coconut Fiber2862 Stucco Fiber

Micro Laminate2920 Marl Micro2921 Gypsum Micro2922 Clay Micro2923 Shadow Micro E

Patina Laminate2870 Blonde Bronze Patina2871 Blackened Bronze

Patina2873 Instant Iron Patina

Solid Laminate2722 Cream E2730 Arctic White2746 Black2759 Warm White E2811 Mist E2883 Seagull2884 Milk2885 Dune2HMG Merle

Speckle Laminate2820 Coffee Speckle E2822 Woodrose Speckle E2823 Driftwood Speckle2824 Smoke Speckle2825 Vanadium Speckle

Tip: Some wood veneer nishes and woodgrain laminates share the same name. Because of the difference in materials, veneers and laminates of the same name are not an exact match but do coordinate with each other.

Woodgrain Laminate2406 Clear Cherry2409 Clear Maple2410 Graphite Walnut2412 Natural Cherry2422 Medium Cherry2511 Winter on Maple2535 Virginia Walnut2538 Clear Walnut2539 Warm Oak E2592 Blonde on Maple2614 Chocolate Walnut2714 Natural Walnut2772 Medium Mahogany on

Walnut E2HAK Clear Oak2HAN Ash Noce2HAT Acacia2HAW Ash Wenge2HBN Bisque Noce2HBW Bisque Wenge2HCN Clay Noce2HCW Clay Wenge2HSN Storm Noce2HSW Storm Wenge

turnstone Laminate Collection2536 Blackwood 2612 Marbled Maple2615 Marbled Cherry

Select SurfacesHigh-Pressure LaminatePrice Group 2 Textured Woodgrain Laminate2TH2 Fawn Cypress2TH3 Weathered Char2TH4 Saddle Oak2TH5 Veranda Teak2TH6 Persian Cherry2TH7 Walnut Heights

This listing includes all the surface material choices that are available for the products in this speci cation guide.

ResourcesFor more information about surface materials, refer to the following resources:

Additional surface materials speci cation tools are available toassist you in the speci cation process — the Surface Materials Binders.

The global surface materials palette is a core collection of nishes that is available across multiple geographies (Americas/EMEA – Europe, Middle East, and Africa/APAC – Asia Paci c) and on global product lines, where applicable. For a list of nishes included in the offering, see the Surface Materials Reference Manual. Additional details, like product approvals by geography and nish number conversions, can also be found in the Surface Materials Reference Manual or see steelcase.com/surface-materials.

Surface Materials Binders include: • Surface Materials

Reference Manual• A complete set of swatch

cards for hard surfaces, vertical surface fabrics, and seating upholstery

Paintc�See Surface Materials Reference Manual for a listing of available paints for Victor2.

Applies to:• Blades on shelves, bins,

drawers, and skins• Wire cut-out cover• Top caps

Steelcase SurfacesTextured Paint7207 Black7241 Arctic White

Smooth Metallic Paint4799 Platinum Metallic


Surface Materials

E = Established

Plastic

Applies to:• Plastic edge on laminate

worksurfaces

Steelcase Surfaces

6000 Black6001 Coffee 6009 Arctic White6034 Natural Cherry6036 Medium Cherry6037 Winter on Maple6038 Blonde on Maple6041 Natural Walnut6045 Medium Mahogany

on Walnut E6052 Milk6053 Seagull6213 Acacia6219 Clear Oak6231 Graphite Walnut6234 Clear Cherry6237 Clear Maple6242 Virginia Walnut6243 Blackwood6245 Clear Walnut6246 Warm Oak E6249 Platinum Solid6271 Plywood6527 Merle6612 Grey V2 E6615 Grey V56619 Ice E6631 Cream6635 Dawn E6636 Mist6654 Sand6655 Warm White6676 Marbled Maple6677 Chocolate Walnut6678 Marbled Cherry6694 Slate6695 Midnight 6697 Fog 6698 Fieldstone 6703 Ash Wenge6704 Storm Wenge6705 Bisque Wenge6706 Clay Wenge6707 Ash Noce6708 Bisque Noce6709 Clay Noce6710 Storm Noce

Select Surfaces6T02 Fawn Cypress6T03 Weathered Char6T04 Saddle Oak6T05 Veranda Teak6T06 Persian Cherry6T07 Walnut Heights

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame Speci cation Guide cSurface Materials, continued 123

Surface Materials

Quarter-cut open-pore nish choices

Wood Group 13042 QC/OP Ash*3222 QC/OP Clear Maple*3272 QC/OP Amber on Maple E3292 QC/OP Blonde on Maple3302 QC/OP Clear Walnut3312 QC/OP Natural Walnut3322 QC/OP Dark Mahogany on Walnut3352 QC/OP Medium Walnut3362 QC/OP Dark Walnut3372 QC/OP Medium Mahogany on Walnut3382 QC/OP Graphite Walnut

Rift-cut open-pore nish choices

Wood Group 13602 RC/OP Desert Oak3612 RC/OP Warm Oak E3692 RC/OP Espresso Oak

Full- ll nish is a medium-gloss nish that completely lls the grain texture, yet allows the grain pattern to be seen. The wood has a lustrous, satiny look, and it is smooth to the touch. This nish is available on the wood top only.

Flat-cut full- ll nish choices

Wood Group 13064 FC/FF Graphite Walnut3404 FC/FF Clear Cherry (Aged)3414 FC/FF Natural Cherry E3424 FC/FF Medium Cherry3524 FC/FF Clear Maple*3544 FC/FF Blonde on Maple3574 FC/FF Amber on Maple E3704 FC/FF Clear Walnut3714 FC/FF Natural Walnut3724 FC/FF Dark Mahogany on Walnut3754 FC/FF Medium Walnut3764 FC/FF Dark Walnut3774 FC/FF Medium Mahogany on Walnut

Quarter-cut full- ll nish choices

Wood Group 13224 QC/FF Clear Maple*3274 QC/FF Amber on Maple E3294 QC/FF Blonde on Maple3304 QC/FF Clear Walnut3314 QC/FF Natural Walnut3324 QC/FF Dark Mahogany on Walnut3354 QC/FF Medium Walnut3364 QC/FF Dark Walnut3374 QC/FF Medium Mahogany on Walnut3384 QC/FF Graphite Walnut

Rift-cut full- ll nish choices

Wood Group 13604 RC/FF Desert Oak3614 RC/FF Warm Oak E3694 RC/FF Espresso Oak

*To ensure an understanding of the color ranges and characteristic variations of natural veneer, a sign-off sheet is required prior to orders being accepted for this clear-coat nish. The sign-off sheet is available through Steelcase advertising stock. Please use form number 09-0000756 for 3042, form number 05-0001370 for 3222 and 3224.

Premium VeneersA selection of Premium veneers in this collection are available on most Steelcase brand products. The collection will be available as close to standard leadtimes as possible. However, because adequate supplies of veneer and solids must be secured, all orders will be scheduled individually. Leadtimes will vary based on Premium veneer and Premium solids availability at the time the order is placed. The collection is Graded-In as Wood Group 2 and Wood Group 3, and supported like standard veneers to make ordering easy. Please see the Steelcase surface materials section on village.steelcase.com for sample information and product line availability. All premium veneers are in clear-coat.


Wood Group 23032 QC/OP Dark Thin Line Bamboo3052 QC/OP Ribbon Sapele

Wood Group 33832 QC/OP Figured Anegre3842 QC/OP Figured Makore

To ensure an understanding of the color ranges and characteristic variations of natural veneer, a sign-off sheet is required prior to orders being accepted for this clear-coat nish. The sign-off sheet is available through Steelcase advertising stock. Please use form number 09-0000755 for 3032, form number 09-0000757 for 3052, form number 09-0000758 for 3832, and form number 09-0000759 for 3842.

Select SurfacesFor information on products within Select Surfaces, including accent paints and fabrics from Designtex, Gabriel, Kvadrat, and Pollack, please refer to the Surface Materials Reference Manual or visit steelcase.com/surface-materials under the Select Surfaces section.

Composite VeneerComposite veneers are an engineered wood intended to create speci c grain patterns and characteristics. They are pre-stained and nished with Steelcase’s Clarity water-borne UV topcoat, which protects the environment while providing durability and clarity. Only open-pore nishes are available on composite wood. Composite veneer and matching edge bands are available on most Steelcase brand products. Composites, for us as a solid nosing substitute, are not available. Steelcase does not recommend mixing composite veneers with natural solid nosings because composite and natural wood grain and color matching are rarely compatible. Composite veneers are Graded-In as Wood Group 1 pricing.

Flat-cut open-pore nish choices

Wood Group 13JDX FC/OP Oak Composite3JFX FC/OP Maple Composite3JHX FC/OP Cherry Composite3JJX FC/OP Walnut Composite

E = Established

WoodApplies to:• Wood skins• Wood shelves• Wood drawers• Wood bins

Steelcase carefully selects veneer and solid wood for consistent color and grain structure. Wood is a natural material and variations will occur in color, grain and texture. These variations are part of the inherent natural beauty of wood and are not considered defects.

All wood products will darken with age and exposure to ultraviolet light. This is especially apparent with cherry and maple veneer. We recommend that desk accessories be rearranged periodically to ensure even aging of wood surfaces.

When storing your wood furniture, please follow the following guidelines:• Do not store products in trailers• Store products in areas that simulate of ce

temperatures (60°F to 90°F)• Store products in areas that maintain constant,

of ce-like humidity levels• Keep product away from light. Cover products to

make sure they are not exposed to light.

Steelcase SurfacesVeneer Veneers are matched for proper balance and consistency. Veneers are available at cut or quarter cut, except for Oak, which is rift cut. Refer to the Surface Materials Reference Manual for descriptions of each cut.

Open-pore nish is a medium gloss nish that leaves the wood grain texture visible to the eye and distinguishable to the touch.

c�See Surface Materials Reference Manual for a listing of available veneers for Victor2.


Wood Group 13062 FC/OP Graphite Walnut3402 FC/OP Clear Cherry (Aged)3412 FC/OP Natural Cherry E3422 FC/OP Medium Cherry3522 FC/OP Clear Maple*3572 FC/OP Amber on Maple E3592 FC/OP Blonde on Maple3702 FC/OP Clear Walnut3712 FC/OP Natural Walnut3722 FC/OP Dark Mahogany on Walnut3752 FC/OP Medium Walnut3762 FC/OP Dark Walnut3772 FC/OP Medium Mahogany on Walnut

Su

rfac

e M

ate

rials

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


https://www.steelcase.com/resources/surface-materials/


http://www.designtex.com

http://www.pollackassociates.com


Surface Materials, continued

Quarter-cut full- ll nish choices

Wood Group 13394 QC/FF Black Walnut

Rift-cut open-pore nish choices

Wood Group 136A2 RC/OP Volcanic Oak

Planked VeneerPlanked veneer is available in the Select Surfaces offering. Planked veneer may have extended leadtimes. Place your order as you normally would for any other nish, calling out the appropriate nish code.

The following nishes are available through the planked veneer offering:

Wood Group 13P41 OP Planked Cherry3P51 OP Planked Maple3P61 OP Planked Oak3P71 OP Planked WalnutTip: Known for its uniqueness, planked veneer has intentional and natural variations that include, but are not limited to: character marks, grain pattern, color, and natural color aging.

Custom SurfacesCustomiz stain is a service that allows you to create your own stain colors and nishes on standard veneer. Customiz stain color is available on all product lines that offer wood veneer.

A $500 stain matching fee applies on all CUSTOMIZ requests. (Exception: The $500 fee does not apply on matches to Coalesse standard nishes or for a low-gloss nish request on a standard color.) The $500 fee covers the cost of formulating the Customiz color nish and applies regardless of whether or not an order for product is placed.

In addition, an approval form must be signed to indicate customer acceptance of Customiz match. A $1,500 initiation fee will be charged prior to rst order entry. This initiation fee activates the nish for unlimited use on any Steelcase product for an 18 month time period. After the 18 month time period has lapsed, the Customiz nish may be reactivated for another 18 months for a $1,000 fee at any point within ve years after the $1,500 initiation fee was paid. If the nish is not reactivated within ve years after the $1,500 initiation fee was paid, the nish will be culled and the customer will need to pay the $1,500 initiation fee again. All style number related Customiz charges on products are no cost as of April 2014. The matching and initiation fees are not discountable.

Customiz stain takes 10 days to formulate. Consult the Surface Materials Reference Manual for more information. Custom veneers are also available and must be quoted by Steelcase specials group. Customiz stain on custom veneers takes 2 to 5 weeks to formulate. Requirements and information on ordering a Customiz stain color are found in the Surface Materials Reference Manual.

Glass

Steelcase SurfacesApplies to:• Glass skins6580 Ice White

Vertical Surface Fabric

Applies to:• Fabric skins

Steelcase SurfacesPrice Group A Sprite5540 Khaki5541 Snow5542 Butter5543 Linen5544 Sherbet5545 Powder5546 Harvest5547 Sky5548 Kiwi

Price Group 1 Abacus E P122 Entasis P123 Portico P124 Opus P125 Cusp P126 ArtifactP129 Atlas

Alloy P525 Polar P526 Skim P527 Bubbly P528 Tern P529 Shore P530 Asti P531 Silver P532 Oxide P533 Element P534 Construct P535 Currency P536 Iron

BoccieP200 New Rice P201 New Almond P202 New Nutmeg P203 New CamelP204 New OpalP205 New MistP206 New PlumP207 New LichenP208 New SpearmintP209 New Sky

Buzz25F03 Tomato5F04 Red E5F05 Burgundy5F06 Sky E5F07 Blue5F08 Navy5F10 Grape E5F11 Eggplant E5F15 Stone5F16 Grey5F17 Black5G50 Dunegrass5G51 Sable5G52 Barley5G53 Sunrise5G54 Carrot5G55 Pumpkin5G56 Timber5G57 Rouge5G58 Chocolate5G59 Meadow5G60 Ivy5G61 Cyan5G62 Atlantic5G63 Crocus5G64 Alpine5G65 Tornado

CharmP504 TintP505 Shell P506 Mimosa P507 Birch P508 Sparkle P509 Ginkgo P510 Debut P511 Clover P513 Twilight

LapelP409 Cement P410 Pebble P411 Beech P412 Dune P413 Grain P414 Sprout P415 Misty Blue P416 Maple P417 Slate

OpticP540 Hazel P541 Twinkle P542 Orion P543 Seaglass P544 Shine P545 Halo P546 Whiskey P547 Bath P548 Whisper P549 Breezy P550 Wry P551 Glimmer

E = Established


Wood Group 13F8X QC/OP European Walnut Composite3GAX QC/OP Gold Teak Composite3GFX QC/OP Rosewood Composite3GGX QC/OP Zebrano Composite3HGX QC/OP Oak Composite3HVX QC/OP Walnut Composite3JEX QC/OP Maple Composite3JGX QC/OP Cherry Composite3ZNX QC/OP Night Cerused Oak Composite

Natural VeneerNatural veneer is available in the Select Surfaces offering. Natural veneer may have extended leadtimes. Place your order as you normally would for any other nish, calling out the appropriate nish code.

The following nishes are available through the natural veneer offering:


Wood Group 13342 FC/OP Black Walnut35A2 FC/OP Blanch Maple37A2 FC/OP Thunder Walnut

Wood Group 33082 FC/OP Washed Walnut

Flat-cut full- ll nish choices

Wood Group 13734 FC/FF Black Walnut

Wood Group 33084 FC/FF Washed Walnut


Wood Group 132A2 QC/OP Blanch Maple33A2 QC/OP Thunder Walnut3392 QC/OP Black Walnut

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................



PianistaP420 SandP421 MistP422 RainP423 NaturalP424 CaféP425 DenimP426 CarbonP427 StoneP428 FlaxP429 OatP430 WheatP431 Maize

Rhythm P555 Allegro P556 Tempo P557 Refrain P558 Pitch P559 Harmony P560 Melody P561 Stanza P562 Opus

Tinsel P515 SugarP516 LitP517 EgoP518 FizzP519 MuseP520 DepthP521 BlissP522 GrowP523 DolceP524 Boost

Price Group 2Bariolage G200 New Etude G201 New Andante G202 New Cantata G203 New Adagio G205 New Ballata G206 New Sonata

Bouquet E P165 HostaP166 DundeeP169 ArgentaP170 HoyaP173 Camomile

Code5FA1 Fossil5FA2 Gabbro5FA3 Reed5FA4 Bluff5FA5 Sea Salt5FA6 Cannon5FA7 Tussah5FA8 Mica5FA9 Ecru5FB1 Bamboo

Flip: Orbit5F85 Mud Pie5F86 Hummus5F87 Petoskey5F88 Pluto5F89 Papyrus5F91 Blizzard5F92 Briquette

Flip: TexHex5F75 Mud Pie 5F76 Hummus 5F77 Petoskey 5F78 Pluto 5F79 Papyrus 5F97 Blizzard5F98 Briquette

Fresco G001 SandriftG002 MistibluG003 FaonG006 ChamolineG007 GrapenutG017 Flint

LatchP600 SeashellP601 ClamP602 EggshellP603 ZenP604 Cool GrayP605 ArmorP606 SentinelP607 RyeP608 BillowP609 Nimbus

Milano EN002 DelftN003 WoodlandN004 SunshadowN005 OlivineN012 Teakwood

Price Group 3Billiard Multi-Use by Designtex5H10 Bone5H11 Poppy5H12 Tangelo5H13 Citron5H14 Avocado5H15 Hunter5H16 Indigo5H17 Mallard5H18 Teak5H19 Cumulus5H20 Pewter5H21 Gunmetal5H22 Ink

Select SurfacesFor information on products within Select Surfaces, including accent paints and fabrics from Designtex, Gabriel, Kvadrat, and Pollack, please refer to the Surface Materials Reference Manual or visit steelcase.com/surface-materials under the Select Surfaces section.

Custom SurfacesPrice Group COM(Customer’s Own Material)

Fabric Approval and YardageTo con rm whether a particular COM material has already been tested for use on a speci c Steelcase product or to determine actual yardage requirements:• Visit www.steelcase.com

For additionalinformation regarding Customer’s Own Material, call 1.888.STEELCASE (1.888.783.3522) or send an e-mail to [email protected].

c�See Surface Materials Reference Manual for a listing of available seating upholstery colors.

Su

rfac

e M

ate

rials

Surface Materials

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................E = Established





http://www.pollackassociates.com


66" F

abric

Wid

th

Warp Direction Warp Horizontal

One application direction of fabric on FlexFrame skins is warp horizontal. Standard Steelcase fabrics were designed for this application direction.

Warp Vertical66" F

abric

Width

War

p D

irect

ion

The other application direction of fabrics on FlexFrame skins is warp vertical. This is most commonly used on COMs designed for warp vertical application.

For more information about the warp direction of fabrics, see the Surface Materials Reference Manual.

Speci cation Guidelines for Directional Fabrics

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


Wood Veneer Grain and Directional Laminate Application


Wood Veneer Grain and Directional Laminate

Application

Su

rfac

e M

ate

rials

Wood veneer and directional laminates are standard with the grain directions shown.

The appearance of wood veneer may change slightly depending on the angle from which it is viewed. The natural phenomenon is called polar-ization, and it can be seen on natural veneer, and to a lesser extent on composite veneer. Polarization is often noticed on surfaces installed at a 90 degree angle with each other.

Some wood veneer nishes and woodgrain

laminates share the same name. Because of the differ-ence in materials, veneers and laminates of the same name are not an exact match but do coordinate with each other.

Tech Box can have direc-tional change of horizontal and vertical.

Wood Veneer Grain

Horizontal

Horizontal

Vertical

Vertical

Directional Laminate

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................




Resources


Re

sou

rce

s

Style Number Index 130



StyleNumber Page Description


AWDR 120 Victor2 Display

AWRF254836 119 Victor2 Freestanding Unit

AWRF256036 119 Victor2 Freestanding Unit

AWRM183636 116 Victor2 Mobile Unit

AWTS 120 Victor2 Tray Shelf

FFAA23 105 Workwall Wire Manager



FFAC 102 Wire Management Cut-out Cover

FFAT23 102 Top Cap

FFAT29 102 Top Cap

FFAT35 102 Top Cap

FFDC3672L 109 Cantilever Desk

FFDC3672R 109 Cantilever Desk







FFDD3672L 111 Cantilever Desk with media:scape

FFDD3672R 111 Cantilever Desk with media:scape







FFKB2214 98 Skin For Bin

FFKB2214M 98 Cable Management Skin For Bin





FFKC2324 101 Cantilever Desk and Table Attachment Skin



FFKD2214 97 Skin For 161 2"H Double Shelf

FFKD2214M 97 Cbl Mgmt Skin For 161 2"H Double Shelf

FFKD2214T 97 Tech Skin For 161 2"H Double Shelf










FFKK2316 95 161 2" High Skin

FFKK2316M 95 Cable Management Skin

FFKK2316T 95 Technology Skin

FFKK2333 95 33" High Skin















FFKQ3524L 101 Cantilever Desk and Table Attachment Skin

FFKQ3524R 101 Cantilever Desk and Table Attachment Skin

FFKS2215 97 Skin For 161 2"H Single Shelf

FFKS2215M 97 Cbl Mgmt Skin For 161 2"H Single Shelf

FFKS2215T 97 Tech Skin For 161 2"H Single Shelf










FFKT2333C 99 TV Attachment Skin, Centered

FFKT2333S 99 TV Attachment Skin—Pair, Spanning





FFKW238 100 Worksurface Attachment Skin



FFLD30 106 30 Watt Light Dimming Kit

FFLD60 106 60 Watt Light Dimming Kit

FFLK30 106 30 Watt Light Kit

FFLK30E 107 30 Watt Remote Ctrl Light Kit w Dimmer

FFLK60 106 60 Watt Light Kit

FFPF22102 87 Workwall Perimeter Frame















Style Number Index

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................


FlexFrame Speci cation Guide cStyle Number Index, continued 131

Style Number Index


































































FFSH122316C 89 Double Shelf

FFSH122316U 90 Single Shelf

FFSH122316W 91 Single Shelf
















FFSH192316B 92 Bin





FFSH19238D 92 Drawer



FFSH192916B 92 Bin








FFSH193516B 92 Bin








FFTC4872 112 Cantilever Table

FFTC4890 112 Cantilever Table

FFTD4872 115 Cantilever Table with media:scape

Re

sou

rce

s

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................





Style Number Index, continued

FFTD4890 115 Cantilever Table with media:scape

FFVF21 88 Inner Vertical Frame Piece




FFVH102 103 Modular Harness

















FFVIH 104 Hardwire Power Infeed

FFVR1 103 1-Circuit Receptacle Kit

FFVR2 104 2-Circuit Receptacle Kit

FFVT23 104 Workwall Base Power Tray



................................................................................................................................................

................................................................................................................................................

................................................................................................................................................




Style Number Index

Re

sou

rce

s


Trademark List

................................................................................................................................................

................................................................................................................................................

................................................................................................................................................

® The following are registered trademarks for products of Steelcase Inc. or one of its

® The following registered trademarks are under


® The following is a registered trademark of





Toggler.

® The following is a registered trademark

Microsoft.








®

™ The following are trademarks for products of Steelcase Inc. or one of its related corporate

I

™ The following is a trademark of Microsoft

™ The following trademarks are under license

™ The following trademark is used under license






3

e3

Trademarks used here in are the property of Steelcase, Inc. or of their respective owners.

................................................................................................................................................


Documents

FlexFrame Speciw cation Guide - Steelcase · FlexFrame Speciw cation Guide Availability Electronic price list updated with release 190.A (U.S.) and 151.A (Canada), dated April 15,