MJJIS2013 MJIIT-JUC Joint International Symposium 2013

A memorial event celebrating the 40th Year of ASEAN-Japan Friendship and Cooperation

Nov. 6-8, Shonan Campus, Tokai University, Hiratsuka, JAPAN

Organized by

JUC (Japanese University Consortium) MJIIT (Malaysia-Japan International Institute of Technology)

Supported by Tokai University

Universiti Teknologi Malaysia MEXT (Ministry of Education, Culture, Sports, Science and Technology in Japan)

MOFA (Ministry of Foreign Affairs of Japan) JICA (Japan International Cooperation Agency)

Welcoming Messages from General Co-chairs

It is my great pleasure to welcome all participants to this MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), which is a memorial event celebrating the 40th Year of ASEAN-JAPAN Friendship and Cooperation. This symposium is held at Tokai University, Hiratsuka, Kanagawa, JAPAN between November 6th and 8th. Japan University Consortium consists of 25 Japanese universities participating not only in steering of this symposium but also in the establishment and further development of MJIIT. International collaboration nowadays has been a widely acknowledged, research trend. In such research endeavor, multi-cultural and interdisciplinary

atmosphere is a key factor to incubate challenging spirits and supporting environment for pioneering a new research field. This symposium exactly serves such a purpose because the main objective of the symposium is to promote communication and dialogue among young researchers, engineers and students from different countries. This symposium covers the fields of Electronic Systems Engineering, Mechanical and Precision Engineering, Environmental and Green Technology, Management of Technology, Information Technology and Communications, and Medical Biotechnology. Three keynote speeches and approximately 190 research papers will be presented. I would like to take the opportunity to thank the researchers and postgraduate students for their contribution and dedication to MJJIS2013. I also would like to express my sincere gratitude to all of the hardworking committee members and the secretariat for materializing this symposium. Last but not least, our special appreciation goes to MOFA, MEXT, and JICA for giving their strong support for MJJIS2013. Hiromu Hashimoto, Professor Vice Chancellor, Tokai University

Both the Malaysian and Japanese governments have established the Malaysia Japan International Institute of Technology (MJIIT) with the aim to provide engineering education with greater emphasis and focus towards the ASEAN region. The formation of MJIIT is the climax of the first wave of the Look East Policy observed by Malaysia. MJIIT is liken to a “Japanese University” operating off shore, in Malaysia, which is considered unthinkable in the past. The support from a consortium of 25 Japanese Universities (JUC), organized through the Japanese Ministry of Foreign Affairs (MoFA), is indeed immense in ensuring that Japanese style engineering education is established, and inculcating and deeply rooting the Japanese work culture.

The cooperation, which started well before 10th August 2010, the official launching date of the MJIIT, has seen a tremendous growth and stability with respect to the placement of Japanese academic staff at MJIIT and undertakings of joint supervision of postgraduate students, in strengthening the teaching and research thrust at MJIIT.

The joint symposium between MJIIT and JUC is indeed amalgamating further the established strong linkages. It is a pleasure to note that this second symposium between the MJIIT and the JUC is organized by Tokai University, as a continuing effort to bring academic staff and students from participating universities as well as outside the consortium to discuss on advanced research and development work carried out. It is also worth noting that this platform of MJIIT-JUC International Symposium (MJJIS) is part of the celebration of the 40th year of ASEAN-Japan Cooperation.

Finally, I would like to thank the MJIIT-JUC committee and the local organizing committee from Tokai University for making this symposium a reality, continuing from the first symposium at MJIIT in 2012. I am indebted to Professor Hashimoto for bringing the 2013 MJJIS to this lovely campus of Tokai University. To all paper presenters and participants, I would like to wish an interesting and fruitful symposium! Arigato gozaimasu. Megat Johari Megat Mohd Noor, Professor Dean of MJIIT

We welcome all participants attending MJIIT-JUC Joint International Symposium 2013. This is the second symposium jointly organized between MJIIT and Japanese University Consortium (JUC). MJIIT prepares unique educational programs for undergraduate and graduate students and staff with support by 25 Japanese universities in order to become the only one organization in ASEAN. Promotion and recommendation to attend this symposium for students and staff is a typical example of those programs. One of objectives of this symposium is to provide opportunities to young researchers and students of both MJIIT and Japanese universities to establish the networks and to breed seeds of collaboration among researchers. MJJIS2013

will surely provide all symposium participants with the opportunity to discuss together topics such as university-industry collaboration, technology partnership between Malaysia-Japan, internationalization of universities, and other hot topics. It will be required that young students and researchers absorb and assimilate a variety of knowledge from foreign countries in those proceeding research fields and that they utilize those information in regeneration and activation for own nations. From this view point, MJJIS2013 will offer an adequate opportunity to promote and accelerate the face-to-face relationship for exchange of information.

I would like to express sincere thanks to all committee members and the secretariat, especially, Professor Yoshio Yamamoto and Tokai University for preparing this valuable and important symposium. Takashi Yamamoto, Professor Deputy Dean (Liaison and Internationalization) of MJIIT

Organizing Committee General Co-chairs Hiromu Hashimoto (Tokai University), Megat Johari Megat Mohd Noor (MJIIT), Takashi Yamamoto (MJIIT) Technical Program Yoshio Yamamoto (Tokai University), Ryu-ichiro Ohyama (Tokai University), Masao Kohzaki (Tokai University), Hideyuki Horisawa (Tokai University), Ai Kotani (Tokai University), Azran Azhim Noor Azmi (MJIIT), Hafizal bin Yahaya (MJIIT) Publicity Osamu Uchida (Tokai University), Masayuki Morimoto (Tokai University), Kazumi Terada (Tokai University), Kentaro Takemura (Tokai University), Naoki Oshima (MJIIT), Toshio Wakabayashi (MJIIT) Finance Kunio Okimura (Tokai University), Satoru Iwamori (Tokai University), Akihiko Azetsu (Tokai University) Local Arrangement Masayuki Ochiai (Tokai University), Kazuyoshi Tsuchiya (Tokai University), Shinjiro Umezu (Tokai University), Registration Yuta Sunami (Tokai University), Tsutomu Sekine (Tokai University)

JUC Committee Kyushu University, Keio University (Shinnosuke Obi), Saitama University (Takeshi Mizuno), Shibaura Institute of Technology (Masahiko Tachibana), Takushoku University (Yuji Watanabe), Tokai University (Yoshio Yamamoto), Tokyo University of Agriculture and Technology (Yoshiyuki Yamashita, Koji Ikeda), Nagaoka University of Technology (Kanji Yasui), Nagoya Institute of Technology (Yutaka Tada), Japan Advanced Institute of Science and Technology (Akio Makishima), Meiji University (Jun Sakakibara), Ritsumeikan University (Masahisa Koyama), Ritsumeikan Asia Pacific University, Osaka University (Masaharu Imai, Toshihiro Tanaka), Yamaguchi University (Yoshiyuki Matsuura), Kinki University (Takayoshi Kimura), Tokyo University of Technology (Hiroyuki Kameda), Tokyo Denki University, Tokyo University of Science, Okayama University of Science (Toshiaki Kaneeda), Kyushu Institute of Technology (Kenichi Urabe), Kanazawa University (Minoru Yamada), Toyohashi University of Technology, Yamagata University (Kenji Inoue), University of Tsukuba (Yoshihiro Shiraiwa)

Reviewers Kiyoshi Ando, Hidenori Aoki, Masaki Asobe, Akihiko Azetsu, Bidisha Chanda, Zhili Chen, Kazuhiko Hamamoto, Nao Hodoshima, Hideyuki Horisawa, Koji Ikeda, Satoru Iwamori, Yoshihiro Kai, Mitsuhiko Karashima, Takeo Kato, Hiroshi Kimura, Kiyoteru Kobayashi, Masao Kohzaki, Ai Kotani, Hirosi Kuwahata, Kazushige Magatani, Akio Makishima, Yoshiyuki Mastuura, Takeshi Mizuno, Masayuki Morimoto, Shinnosuke Obi, Masayuki Ochiai, Jun Ogata, Hirokazu Ohtagaki, Ryu-ichiro Ohyama, Hiroo Okanaga, Kunio Okimura, Atsushi Okuyama, Kazuki Okuyama, Jun Sakakibara, Tsutomu Sekine, Takehisa Shibuya, Yuta Sunami, Masakazu Suzuki, Yutaka Tada, Syun Takahashi, Kentaro Takemura, Kazuyoshi Tsuchiya, Osamu Uchida, Shinjiro Umezu, Yuji Watanabe, Minoru Yamada, Natsuko Yamakawa, Yoshio Yamamoto, Yoshiyuki Yamashita, Kanji Yasui

Map of Shonan Campus, Tokai University

COM SQUARE (Banquet)

#12 Building

(Room C, D, E, F)

#17 Building

(Nexus Hall, Room A, B,

Registration Desk)

East Gate

Keiji-mon Gate

South Gate

North Gate

Floor Maps

Room C

Room D

Room E

Room F

5th Floor, #12th Building

2nd Floor, #17th Building

Room A

Room B

Nexus Hall

stairs

elevator

women's toilet

men's toilet

women's toilet men's toilet elevator

Time Table Wednesday, Nov. 6, 2013

Nexus Hall Room A Room B Room C Room D Room E Room F

10:00-11:00 Opening Ceremony [Nexus Hall]

11:00-11:40 Keynote Speech I [Nexus Hall] Prof. Megat Johari Megat Mohd Noor (MJIIT)

11:40-12:00 Photo Session [Nexus Hall] 12:00-14:00 Lunch [Room C] 14:00-15:40 MB-1 MP-1 ES-1 IT-1 EG-1 MP-2 15:40-16:00 Coffee Break

16:00-17:40 Poster

Session* MP-3 ES-2 MT-1 (15:40-17:40) MP-4

18:30-20:30 Banquet [Com Square]

Thursday, Nov. 7, 2013

9:30-10:10 Keynote Speech II [Nexus Hall] Prof. Ai Kotani (Tokai University)

10:10-10:50 Keynote Speech III [Nexus Hall] Dr. Tadaaki Nagao (National Institute for Materials Science)

10:50-11:20 Coffee Break

11:20-13:00 Special

Session* MP-5 ES-3 IT-2 EG-2 MP-6

13:00-14:00 Lunch [Room C] 14:00-15:40 MB-2 MP-7 ES-4 IT-3 EG-3 MP-8 15:40-16:00 Coffee Break 16:00-17:40 MP-9 ES-5 MT-2 IT-4 EG-4 MP-10 18:00-18:30 Closing Ceremony [Nexus Hall]

Friday, Nov. 8, 2013

Optional: Factory visit tour (Fuji Film Corporation) Technical Sessions:

ES: Electronic System Engineering MP: Mechanical and Precision Engineering EG: Environmental and Green Technology MT: Management of Technology IT: Information Technology and Communications MB: Medical Biotechnology

Special Session: Japanese-Style Human Resource Development in ASEAN Countries Room A: Seminar room 1, #17 Building, Room B: Seminar room 2, #17 Building Room C: Conference room1, #12 Building, Room D: Conference room2, #12 Building Room E: Conference room3, #12 Building, Room F: Conference room4, #12 Building * Poster Session and Special Session are open to public. Everybody is welcome to attend without a

registration fee.

Keynote Speech I

Teaching and Research Challenges at

Malaysia Japan International Institute of Technology

(MJIIT)

Megat Johari Megat Mohd Noor

Malaysia Japan International Institute of Technology Universiti Teknologi Malaysia

Abstract

The idea of setting up MJIIT was mooted in 2000 by then the Prime Minister of Malaysia, Mahathir Mohamed, who has been instrumental in forging Malaysia’s Look East Policy in the early 1980s. The Look East Policy has attained its 30th anniversary and had produced many Malaysian graduates from Japanese and Korean universities. Initially, Mahathir Mohamed envisaged the establishment of a Japanese university on Malaysian soil, such as the likes of British and Australian universities operating in Malaysia. The discussion at times became cold and the idea of setting of a Malaysia Japan institution was reactivated again in 2006 with an anticipated acronym MAJU (Malaysia Japan University). Due to the enormous cost in establishing another public university to the existing 20, as the Japanese government wanted this entity be a public institution instead of a private one, it was scaled down to an institute with an acronym MJIIT (Malaysia Japan International Institute of Technology). MJIIT was established on 10th of August 2010 and allocated within the Kuala Lumpur Campus of Universiti Teknologi Malaysia (UTM), with funding coming directly from the then Malaysia Ministry of Higher Education (now Ministry of Education). The MJIIT project is worth over MYR 800 million excluding emolument, to be developed over a period of seven years. JICA has been designated as the implementing agency for the Japanese government and UTM for the Malaysian government. MJIIT governance is thus that of the UTM and MJIIT is answerable to the UTM senate, but having a special Advisory Committee comprising Malaysian and Japanese representatives. Although MJIIT is to be a research focus entity, it is also expected to undertake teaching of undergraduate students. Four major disciplines agreed upon are namely; Mechanical Precision Engineering, Electronic Systems Engineering, Environment and Green Technology, and Management of Technology. The first three are engineering and the latter is management oriented. Presently, full research programmes (PhD and MPhil), two Master programmes and three undergraduate programmes are on offered, with student enrolment reaching nearly 600 students

and academic staff strength exceeding 70. MJIIT is on track with regard to its blueprint for development on staffing and student enrolment. The KES model; knowledge, experience and self-learning, is a unique learning model adopted at MJIIT with greater emphasis placed on industry involvement. Ningen Ryoku subjects to help built the human skills becomes the signature of the undergraduate programmes and rinkou for the postgraduate students. Students are encouraged to undertake academic outbound in the form of internship, research attachment, transfer credits or short visits to Japan. This is part of the effort to expose students further to the Japanese work culture. It is MJIIT’s noble mission to inculcate the Japanese work culture apart from becoming an excellent teaching and research institute in advanced technology. Efforts to ultimately establish over 40 innovative kozhas (ikozhas) are ongoing and presently there are 13 ikozhas in operation. Undergraduate students are highly encouraged to be involved with the ikozhas, to develop the interest for research much earlier, and eventually continue their studies at the ikozhas. The emphasis on sustainability is beyond doubt and a challenging one, with its tag line “Engineering the Nation with Precision towards Sustainable Development”. The MJIIT undertaking is a challenging task of “Japonising” an education institution while striving for excellence in research and development. It has to begin with all the academic, technical and administrative staff of MJIIT, leading by example, and infused in the students through the environment and work ethics. With the medium of instruction in English, it makes the effort to be a “Japanese university in Malaysia” even more challenging. On the other hand, MJIIT is a melting pot for internationalization with its English medium. It is the only public entity that is allowed to take in up to 40% foreign students, unlike the norm of less than 10% for all public universities in Malaysia. The presentation will highlight the plan, possible collaborations and challenges faced by the newly developed MJIIT, which is aspiring to be a leader in education and research in advanced technology in the ASEAN region within seven years.

Keynote Speech II

Lesson from a Trial for Cooperation of

Medicine and Engineering

Ai Kotani

School of Medicine Tokai University

Abstract

“Collaboration between different fields” is recently claimed as a critical factor for development of science and innovation of technology. It is sure that sometimes it happens in case of collaboration, something different stimulates each other and makes some big chemical reaction. What is the key factor for such a big success happening to them? Dr. Shinjiro Umezu from School of Engineering of Tokai University developed the unique cell printing method by using ink jet which is called “PELID” and studies the basic research of regeneration of the whole organ by patterning cells using the PELID method. I, from School of Medicine of Tokai University, am studying the interaction between tumor and non-tumor cells in the human lymphoma and the final goal of the research is to develop the novel therapy against lymphoma by regulating the non-tumor cells. In 2012, we met each other and now we are doing the project which is called “Reconstitution of human lymphoma tissue in vitro”. Before we started the collaboration, we had experienced a lot of things like understanding each other, sharing each own knowledge, participating in each other events (cooperation for the events for each other), and making a good human relationship. I would like to introduce our trial (and error) project which we are doing for last one and half year and trying to take lessons from it.

Keynote Speech III

Plasmon-enhanced Vibrational Spectroscopy

for the Detection of Dilute Bio-molecules and

Toxic Substances in Water

Tadaaki Nagao

Group Leader, Nano-system Photonics Group National Institute for Materials Science (NIMS)

Abstract

Surface plasmon polaritons and its low-dimensional variants as well as their confined standing waves (antenna resonances) have become increasingly important in nanotechnology since their optical properties are strongly dependent on the size and the shape of the small objects. This perfectly fits to the directions of nanotechnology which is to provide appropriate building blocks to embody nano-architecture with desired functions for novel electronics/photonics devices. Even down to the subnanometer-scale thin objects plasmon propagation was detected recently and revealed a rich diversity of physics. One of the application in plamonic nano-objects are, antenna resonaces in closed plasmonic structures (nanoparticles, nanowires, nanodisks) wich strongly coulple with light and exhibit wide variety of applications in the field of nanophotonics, environmental science, and light harvesting technology, by utilising the strong electromagnetic field-enhancement associated with the antenna resonances of the optical nanoantennas. In this talk I present some fundamental aspects of realizing plasmonic resonators with both narrow-band and broad-band optical response, and then introduce some applications in photocatalysis as well as bio/environmental sensing with excellent specificity and extremely high sensitivity (< attomolar sensitivity) in aqueous solution. We introduce our recent study on the detection of mercuric ion and dioxin toxicants in environmental water by studying the conformational change and the relevant changes in the vibrational signal induced by the absorption of toxicants in bio-molecules which play important roles as efficient linker molecules for detection as well as detoxical materials.

Wednesday, Nov. 6, 2013 Registration Nov. 6, Wednesday 9:00 – 17:00 Ground-floor, #17Building Opening Ceremony Nov. 6, Wednesday 10:00 – 11:00 Nexus Hall Chair: Prof. Yoshio Yamamoto (Tokai Univ.) Opening Remarks Professor Jiro Takano, Chancellor of Tokai University Words of Welcome Professor Hiromu Hashimoto, Vice-Chancellor of Tokai University Ceremonial Addresses ・Mr. Yoshiaki Sato, Ministry of Education, Culture, Sports, Science and Technology, Director for Overseas Cooperation, International Affairs Division, Senior Analyst for Policy Information Policy Division, Minister's Secretariat ・Mr. Kenji Kanasugi, Ministry of Foreign Affairs,

Deputy Director-General, Asian and Oceanian Affairs Bureau ・Ms. Nobuko Kayashima, JICA, Director General, Human Development Department ・Prof. Masahiko Horie, Former Ambassador of Japan to Malaysia, Meiji University ・Prof. Chiken Kinoshita, Former Vice-dean of MJIIT, Emeritus Prof., Kyushu University Keynote Speech I Nov. 6, Wednesday 11:00 – 11:40 Nexus Hall Chair: Prof. Hiromu Hashimoto (Tokai Univ.) Title: Teaching and Research Challenges at Malaysia Japan International Institute of

Technology (MJIIT) Prof. Megat Johari Megat Mohd Noor (MJIIT) Medical Biotechnology (1) Nov. 6, Wednesday 14:00 – 15:40 Nexus Hall Chair: Takashi Yahata (Tokai Univ.) MB-1-1 Affection of Semiconducting and Metallic Carbon Nanotubes to Human Cell for

Biocompatibility Evaluation Sachiko Iimori, Kagemasa Kajiwara, Minoru Kimura, Kazuyoshi Tsuchiya (Tokai Univ.) MB-1-2 Computational Fluid Simulation in Living Body Yosuke Otsuki, Sho Hanida (JAIST), Futoshi Mori (Univ. Tokyo.), Takeshi Nishimura (Kyoto Univ.), Hiroshi

Ohtake, Go Watanabe (Kanazawa Univ.), Shigeru Ishikawa (Kanazawa Municipal Hospital), Teruo Matsuzawa (JAIST)

MB-1-3 Plasminogen Activator Inhibitor Type-1 is a Negative Regulator of Hematopoietic

Regeneration Abd Aziz Ibrahim, Takashi Yahata, Toshio Miyata, Kiyoshi Ando (Tokai Univ.) MB-1-4 In Vivo Study of Implanted Aortic Scaffolds Decellularized by Sonication Treatment Azran Azhim, Nurul Syazwani (Univ. Tek. Malaysia), Yuji Morimoto (National Defense Medical College),

Katsuko Furukawa, Takashi Ushida (Univ. Tokyo.) MB-1-5 Characteristics of Ago1 Specific Small RNAs: A New Functional Small RNA Jun Ogata (Tokai Univ.), Kohei Takakura (Tokai Univ., Kitasato Univ.), Ai Kotani (Tokai Univ.)

Mechanical and Precision Engineering (1) Nov. 6, Wednesday 14:00 – 15:40 Room A Chair: Akihiko Azetsu (Tokai Univ.) MP-1-1 Development of Monitoring Tool of Active Oxygen Species Using Fluorocarbon Thin Film -

Etching Behavior of Sputtered PTFE Thin Film - Kei Oya, Yuki Ikeda, Satoru Iwamori (Tokai Univ.) MP-1-2 Tire Modeling For Vehicle Dynamic Analysis Muhammad Afandi Nordin (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia), Wira Jazair Yahya (MJIIT),

Mohd Hatta Ariff (Univ. Tek. Malaysia) MP-1-3 Application of High Frequency Air-Coupled Ultrasound To Evaluate Paper Surface

Roughness Muhammad Nur Farhan Saniman, Ikuo Ihara (Nagaoka Univ. of Tech.) MP-1-4 Numerical Simulation of Airfoil in Unsteady Motion Hikaru Takano, Tatsuki Ito, Kota Fukuda (Tokai Univ.) MP-1-5 Fuzzy-PID Controller with Parallel Structure Application in Semiactive Suspension System

Using Magnetorheological Damper Mohammadjavad Zeinali, Saiful Amri Mazlan (MJIIT) Electronic System Engineering (1) Nov. 6, Wednesday 14:00 – 15:40 Room B Chair: Yuji Watanabe (Takushoku Univ.) ES-1-1 2-Dimensional Measurement of Electric Potential due to Spark Discharge on Water Surface Muhammad Khairul Amzar Bin Muhamad, Nurul Shahida Midi, Ryu-ichiro Ohyama (Tokai Univ.) ES-1-2 Simulation for Evaluation: A Study on the Performance Evaluation of WSNs MAC Protocols Mahdi Zareei, A.K.M. Muzahidul Islam, Sabariah Baharun, Shozo Komaki (Univ. Tek. Malaysia) ES-1-3 Neighbor Discovery in Dynamic Cluster Based Wireless Sensor Network Asim Zeb, Nur Syazwani Ghazali, A.K.M. Muzahidul Islam, Shozo Komaki, Sabariah Baharun (Univ. Tek.

Malaysia) ES-1-4 Slow and Variable Group Velocity in a Metamaterial Mimicking Electromagnetically

Induced Transparency Yasuhiro Tamayama, Kanji Yasui (Nagaoka Univ. of Tech.), Toshihiro Nakanishi, Masao Kitano (Kyoto

Univ.) ES-1-5 Electrodeposited Zinc Oxide on Graphene: Effects of Hexamethylenetetramine, Heat and

Current Density Nur Suhaili Abd Aziz (Univ. Tek. Malaysia), Nurul Izni Rusli (Univ. Malaysia Perlis), Mohamad Rusop

Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ. Tek. Malaysia)

Information Technology and Communications (1) Nov. 6, Wednesday 14:00 – 15:20 Room D Chair: Osamu Mikami (Tokai Univ.) IT-1-1 Generation Methods of Separate Points Set for mm-GNAT Xie Pingfang, Kensuke Onishi (Tokai Univ.) IT-1-2 Development of Artificial Biomimetic Wing of Dragonfly Yoshiaki Tanaka, Shinjiro Umezu, Hiromu Hashimoto (Tokai Univ.) IT-1-3 A Study on Tri-Band Notch Characteristics of A UWB Planar Antenna with Triple Slots

Elliptical Element Siti Fatimah Jainal, Toshio Wakabayashi (MJIIT), Mohd Kamal Abd Rahim (Univ. Tek. Malaysia),

Yasuyuki Okamura (Osaka Univ.) IT-1-4 Kernel Density Bandwidth Control for DOA Estimation in the Presence of Spatial Aliasing Ai Kijima, Yasue Mitsukura, Nozomu Hamada (Keio Univ.) Environmental and Green Technology (1) Nov. 6, Wednesday 14:00 – 15:40 Room E Chair: Effie Papargyropoulou (MJIIT) EG-1-1 Fabrication of Titania Layer of Dye-Sensitized Solar Cell (DSC) Kyousuke Kosugi, Yuki Shimoyama, Shinjiro Umezu, Yoshihito Kunugi (Tokai Univ.), Hitoshi Ohmori

(RIKEN) EG-1-2 Development of Convenient Preparation Methods of Precisely Structure-controlled Pt

Nanocrystals and Their Application as Designed Catalysts for Green Technology Mikio Miyake (JAIST), Keiko Miyabayashi (Shizuoka Univ.) EG-1-3 Trial of Glass Recycling by Hydrothermal Processing Masanori Suzuki, Aiman Bin Mohd Halil, Yasuo Takahashi, Toshihiro Tanaka (Osaka Univ.) EG-1-4 Nano-structured Zinc Oxide Films Prepared by Solution Methods for Polymer-based Solar

Cell Application Cheahli Leow (Osaka Univ.), Toshihiro Ohnishi (Sumitomo Chemical Co. Ltd), Michio Matsumura (Osaka

Univ.) EG-1-5 TiN Film Coatings on Inner Wall of Narrow Tube for Hydrogen Impermeation Mao Amano, Akitaka Sakai, Yuta Kohtani, Yoshihito Matsumura (Tokai Univ.) Mechanical and Precision Engineering (2) Nov. 6, Wednesday 14:00 – 15:40 Room F Chair: Hiroo Okanaga (Tokai Univ.) MP-2-1 Fabrication of Artificial Wing with Deformation and Vibration Characteristics Similar to

Dragonfly Wing Hisayoshi Naka, Hiromu Hashimoto (Tokai Univ.)

MP-2-2 Aerodynamics of Dragonfly with Flapping and Feathering Movements Fuma Sakai, Hiromu Hashimoto (Tokai Univ.) MP-2-3 Solution of Dragonfly's Flight Mechanism: Interaction between Aerodynamic Force and

Current Around the Wings Akio Kobayashi, Hiromu Hashimoto (Tokai Univ.) MP-2-4 Flow Visualization and Aerodynamics Characteristics of a Gyroball Gou Yagi, Hiroo Okanaga, Katsumi Aoki (Tokai Univ.) MP-2-5 Preparation and Deformation of Tin Single Crystal Marina Lias, Noriyuki Kuwano (MJIIT) Mechanical and Precision Engineering (3) Nov. 6, Wednesday 16:00 – 17:40 Room A Chair: Hiroyuki Moriyama (Tokai Univ.) MP-3-1 Characteristics of Swing Impact Response of Film Bearing for 2.5"HDD Spindle Motonari Mochiduki, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.) MP-3-2 Measurement of Kinetic Friction between Plastic Film and Steel Roller Yusuke Kotobuki, Yuta Sunami, Hiromu Hashimoto (Tokai Univ.) MP-3-3 Experimental Study on the Effectiveness of Helical Strakes in Suppressing Vortex-Induced

Vibration of a Flexible Cylinder Lee Kee Quen, Aminudin Abu (Univ. Tek. Malaysia), Naomi Kato (Osaka Univ.), Pauziah Muhamad,

Asnizah Sahekhaini, Hanida Abdullah (Univ. Tek. Malaysia) MP-3-4 Influences of Orthogonal Lapping and Its Angle Effect on Mirror-Like Surface Finishing

Process Aung Lwin Moe, Kanao Fukuda, Aminudin Bin Abu, Soe Phyu Lin (MJIIT) MP-3-5 Modeling and Simulation of Magnetorheological Damper with Novel Bypass Valve Fitrian Imaduddin (Univ. Tek. Malaysia), Saiful Amri Mazlan (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia),

Abdul Yasser Abdul Fatah (Univ. Tek. Malaysia) Electronic System Engineering (2) Nov. 6, Wednesday 16:00 – 17:20 Room B Chair: Shozo Komaki (Univ. Tek. Malaysia) ES-2-1 Low Power FPGA Design Using Dynamic Partial Reconfiguration with Power Gating Maryam Afaf Abdul Karim, Fuminori Kobayashi, Ooi Chia Yee, Nordinah Ismail (MJIIT) ES-2-2 Electrical Properties of VO2 Thin Films and Post-Annealing Effects on the Growth of

Non-Stoichiometric VOX Nurul Hanis Azhan, Kunio Okimura (Tokai Univ.)

ES-2-3 A Quantum Mechanical Analysis of Free-Electron Lasers Based on Electron Wave Representation

Hesham Fares, Minoru Yamada (Kanazawa Univ.), Kazuhito Ohmi (National Laboratory for High Energy Physics (KEK))

ES-2-4 Influence of Growth Time and Current Density on the Morphological and Compositional of

Zinc Oxide Nanostructures Deposited on Graphene by Electrochemical Nur Ashikyn Hambali, Hafizal Yahaya (Univ. Tek. Malaysia), Mohamad Rusop Mahmood (Univ. Tek.

MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ. Tek. Malaysia) Management of Technology (1) Nov. 6, Wednesday 15:40 – 17:40 Room C Chair: Mohd Yusri Bin Mohd Yusof (MJIIT) MT-1-1 Towards the Attainment of a High Income Nation by 2020: The Need for New Leadership

Styles and Characteristics in the ICT Industry in Malaysia Mas Bambang Baroto, Mohd Taib Hashim, Sabirin bin Jaafar (Univ. Tek. Malaysia), Ahmad Rahman

Songip (MJIIT) MT-1-2 Leadership's Effect on Creativity and Innovation: Is Japan Unique? Shazlinda Md Yusof (MJIIT) MT-1-3 An Innovative Thinking on the Concepts of Ex-ante Value, Ex-post Value and the Realized

Value (Price) Saburo Horimoto (Shiga Univ.), Maulud Hj Latif (Univ. Tek. Malaysia), Mohammad Ali Tareq (MJIIT) MT-1-4 Technology and Investment: Does Japanese Portfolio Investment in Asia Follow the Flying

Geese Model of Development? Ian Bisset (Ritsumeikan Asia Pacific Univ.) MT-1-5 Sustainable Balanced Scorecard as Performance Measurement System at Malaysian

Private Hospitals: A Literature Review Ahmad Ezainuddin Badarudin, Nooh Abu Bakar (Univ. Tek. Malaysia) MT-1-6 Influence of Screw Pile Penetration into the Ground Visualized by Infrared Thermography Mauricio Jun Arai (System Measure Co., Ltd.), Mamoru Fujii, Ken Watanabe (Tokai Univ.) Mechanical and Precision Engineering (4) Nov. 6, Wednesday 16:00 – 17:40 Room F Chair: Hideyuki Horisawa (Tokai Univ.) MP-4-1 Effects of Flow Around Dragonfly Wing of the Glide Flying Yutaro Kawamura, Hiromu Hashimoto (Tokai Univ.) MP-4-2 Aerodynamics of Dragonfly's Hovering Taisuke Sako, Hiromu Hashimoto (Tokai Univ.) MP-4-3 Development of High-energy Propellant for Laser Microthrusters Keisuke Kondo, Hideyuki Horisawa (Tokai Univ.)

MP-4-4 Simulation of Serpentine Flux Path in Magnetorheological Valve using Finite Element Method Magnetics (FEMM)

Abdul Yasser Abd Fatah, Saiful Amri Mazlan (MJIIT), Tsuyoshi Koga (Yamaguchi Univ.) MP-4-5 Generation of Acoustic Waves and Its Directivity Pattern Utilizing Evanescent Light Kento Matozaki, Iwao Matsuya, Ikuo Ihara (Nagaoka Univ. of Tech.) Poster Session Nov. 6, Wednesday 16:00 – 17:40 Nexus Hall [For poster presenters] Each poster presentation is provided with one A0 (A-zero) poster size area. Pins to put up a poster will also be provided, but there will be neither table nor electricity. Your poster can be put up any time after the venue becomes available. You need to take off your poster immediately after the session is over. PS-1 Crystalline Structure of ZNO Thin Films Grown on A- and C-Plane Sapphires Using

High-Energy H2O Generated by a Catalytic Reaction Kanji Yasui, Eichi Nagatomi, Souichi Satomoto, Hitoshi Miura (Nagaoka Univ. of Tech.) PS-2 Peculiar Amplification Characteristics of the Signal and Noise in the Semiconductor Optical

Amplifier Kazuki Higuchi, Nobuhito Takeuchi, Minoru Yamada (Kanazawa Univ.) PS-3 Optical Properties of MgF2 Composite Films Dispersed with Au or Ag Nanoparticles

Synthesized by Sol-gel Method Shoichi Sato, Eisuke Yokoyama, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.) PS-4 Optical Properties of ZnO Thin Films Dispersed with Noble Metal Nanoparticles

Synthesized by Sol-gel Method Takuji Noguchi, Eisuke Yokoyama, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.) PS-5 A Study on High Frequency Ultrasonic Metal Joining by Use of Surface Acoustic Wave

Device Di Sun (Takushoku Univ.), Kengo Naruse (Seidensha Electronics Co., Ltd), Yuji Watanabe (Takushoku

Univ.) PS-6 Synthesis of Gallium Oxyhydroxide Nanostructures by Hydrothermal and Electrochemical

Techniques Norizzawati Mohd Ghazali (MJIIT), Mohamad Rusop Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka

Univ. of Tech.), Abdul Manaf Hashim (MJIIT) PS-7 Fundamental Study on Controlling Linearization Error in 5-Axis CNC Milling Tsutomu Sekine (Tokai Univ.), Toshiyuki Obikawa (Univ. Tokyo) PS-8 Effects of Oxygen Plasma Exposure on the Aromatic Polymer Surface Shou Seino, Satoru Iwamori (Tokai Univ.)

PS-9 Behavior Change of Water Adsorption by Surface Modification of Fluorocarbon Thin Film Yuki Ikeda, Takahiro Yukawa, Kei Oya, Satoru Iwamori (Tokai Univ.) PS-10 Performance Evaluation of 20cc Hydrogen Rotary Engine for Development of New Micro

Power Source Shogo Yokoyama, Satoshi Ariyama, Kaishu Kawana, Shingo Mizota, Masao Kohzaki (Tokai Univ.) PS-11 Evaluation of Mechanical Properties and Electrical Conductivity of Carbon Nanotube Yarn Kento Takeuchi, Tatsuya Morimoto (Tokai Univ.), Toru Iijima, Yasuhiro Inagaki, Yasuhiko Hayashi

(Okayama Univ.), Toru Kuzumaki (Tokai Univ.) PS-12 Aerodynamic Characteristics Around Square Cylinder with Various Grooves Shapes Afiq Johari, Hiroo Okanaga (Tokai Univ.) PS-13 In Situ Measurement of Water Adsorption on Optical Thin Films Ryou Okuda, Toshiki Harada, Hiroshi Murotani (Tokai Univ.) PS-14 Influence of the Surface-Roughness of the Substrate on the Surface-Roughness of Optical

Thin Films Toshinori Harada, Ryo Okuda, Hiroshi Murotani (Tokai Univ.) PS-15 Characterization of Zinc Oxide Thin Films Prepared by r. f. Sputtering and Laser Ablation

Water Tatsuru Hatta, Ken Koizumi, Sergei Kulinich, Satoru Iwamori, Shigeru Yamaguchi (Tokai Univ.) PS-16 Biodegradable Chelant-assisted Decontamination of Metal-laden Bentonite Ismail M. M. Rahman, Zinnat A. Begum, Hikaru Sawai, Manabu Kobayash, Hiroshi Hasegawa (Kanazawa

Univ.) PS-17 Metabolism of Polychlorinated Biphenyls in Rhodococcus Jostii RHA1 is Closely Related to

Alkane Metabolism Yuki Atago (Okayama Univ.), Masao Fukuda (Nagaoka Univ. of Tech.), Junichiro Futami (Okayama Univ.),

Hirofumi Hara (MJIIT) PS-18 A Photovoltaic System Using Tapped Transformer Suitable for Energy Harvesting Jun Ishikawa, Akihiro Torii (Aichi Inst. of Tech.), Atsushi Nakata (Shizuoka Inst. of Sci. and Tech.), Kae

Doki (Aichi Inst. of Tech.) PS-19 Fertigation with Extracts of Vermicomposts of Palm Mill Waste Parveen Fatemeh Rupani (MJIIT), Asha Embrandiri, Mahamd Hakimi Ibrahim (Univ. Sains Malaysia),

Effie Papargyropoulou (MJIIT) PS-20 Green Nanofibrous Adsorbent Sheet from Electrospinning of Chitosan/poly (Glycidyl

Methacrylate) Blends for Boron Removal from Solutions Nadiah Khairul Zaman, Mohamed Mahmoud Nasef (Univ. Teknologi Malaysia)

PS-21 Reduction Time Transesterification of Vegetable Oil into Biodiesel Using Ultrasound Assisted

Muh Irwan (Poli Teknik Samarinda), Mahyudin Abdul Rachman (MJIIT), Hamdani Saidi (Univ. Tek. Malaysia), Ramli, Marlinda (Poli Teknik Samarinda)

PS-22 Extraction of Personal Name Aliases Using Wikipedia Daiki Saito, Yuji Wakebe, Osamu Uchida (Tokai Univ.) PS-23 An Information Service System at the Time of Large-Scale Disaster Using Twitter Toshihiro Rokuse, Suguru Nagashima, Osamu Uchida (Tokai Univ.), Fujio Toriumi (Univ. Tokyo) PS-24 Construction of a Web-Based System to Present the Status of the Earthquake Disaster

Recovery Yutaro Aoki, Osamu Uchida, Kazumi Terada (Tokai Univ.), Yuki Sato (Sendai Technical High School),

Kiyonari Fukue, Kohei Cho (Tokai Univ.) PS-25 A Topic Providing System Based on the Personal Preference Estimated from Tweets Naoto Kondo, Osamu Uchida (Tokai Univ.) PS-26 Development of the High-Speed Processor for LSI Functional Test Hokuto Ogihara, Tomokatsu Yoshinari, Yuki Takebayashi, Aizuddin bin Shaali Masri, Satoshi Matsuno,

Takeshi Asakawa (Tokai Univ.) PS-27 Extraction of Effective Feature for False Rumor Detection by Analysis of Tweets at the Time

of Great East Japan Earthquake Hikaru Enomoto, Osamu Uchida (Tokai Univ.), Fujio Toriumi (Univ. Tokyo) PS-28 Automatic Emoji Generation Method from Facial Expression Using Kinect Thongkam Chaiyapruk, Osamu Uchida (Tokai Univ.) PS-29 Global Land Cover Classification Using MODIS Surface Reflectance Products Yuji Yamada, Kiyonari Fukue (Tokai Univ.) PS-30 Tensile Test and Atomic Microscopic Analysis on Regenerative Tendon Biomaterial Katsufumi Yamazaki, Ryota Sato, Daiki Morita, Kojun Torigoe, Toru Kuzumaki (Tokai Univ.) PS-31 Construction of Epstein - Barr Virus Infected Tumor Microenvironment In The Three

Dimensions Culture Yudai Kawai, Kazuki Okuyama (Tokai Univ.), Haruna Yamamoto (Tokai Univ., Kitasato Univ.), Shinjiro

Umezu, Ai Kotani (Tokai Univ.) PS-32 Comparison of Carbohydrate Preferences of C-type Lectin SIGNR1 and SIGNR3 as

Phagocytic Receptors Yoko Kawauchi, Yasuhiro Kuroda, Naoya Kojima (Tokai Univ.) PS-33 Development of Tubular Bridges with Steel Pipes Jarwali Turki, Shunichi Nakamura (Tokai Univ.)

PS-34 Influence of a Pre-existing Maar on the Eruptive Activity of the Barombi Mbo Maar, Cameroon Volcanic Line

Chako Tchamabe Boris, Issa, Takeshi Ohba (Tokai Univ.) PS-35 Skid Control of Small Electric Vehicle with Hydraulic-Mechanical Hybrid Brake System Mohamad Heerwan Bin Peeie, Hirohiko Ogino, Yasuo Oshinoya (Tokai Univ.) PS-36 Improvement of the PD Control for an Electromagnetic GSU Yasushi Yamamoto, Shinya Hasegawa, Yasuo Oshinoya (Tokai Univ.) PS-37 Stationary Numerical Calculation of Spark Discharge on Water Surface using Surface

Potential as Boundary Condition Nur Shahida Midi, Ryu-ichiro Ohyama (Tokai Univ.) PS-38 Power Restoration Service Considering Switching Factor Mohd Shahrin Abu Hanifah, Kyoushi Nosu, Hidenori Aoki (Tokai Univ.) PS-39 Study on a Soil Classification Using Electrical Resistivity in Residential Sites Yuanhao Gao, Mamoru Fujii (Tokai Univ.) PS-40 Characteristics of Recombination Plasma with Pulse Plasma Flow Takaaki Iijima, Suguru Tanaka, Hiroaki Kobayashi, Akira Tonegawa (Tokai Univ.), Kohnosuke Sato

(Chubu Electric Power Co.Inc.), Kazutaka Kawamura (Tokai Univ.) PS-41 Evaluating Suction Rate of Coastal Dike Backfilling Materials by Large Waves Masafumi Ioroi, Yoshimichi Yamamoto (Tokai Univ.) PS-42 Structural Characteristics of Multi-span Cable-stayed Bridges Yutaka Okamoto, Shunichi Nakamura (Tokai Univ.) PS-43 Neural Information Processing Models for Consumer Behaviour Analysis Ryozo Kitajima, Ryotaro Kamimura (Tokai Univ.) PS-44 Effect of Added Salt on Aggregates and Adsorbed Film of Crown-ether Surfactants Maki Suzuki, Katsuhiko Fujio (Tokai Univ.) PS-45 A Study of Trace Gas Detection Based on Cavity Enhanced Absorption Spectroscopy (CEAS)

for Power Transformer Diagnosis Ryuta Someya (Toshiba Corp., Tokai Univ.), Takeshi Imamura (Toshiba Corp.), Yusuke Imai, Kazuyoku Tei,

Shigeru Yamaguchi (Tokai Univ.) PS-46 Morphology Control and Characterization of Functional Ceramics by Solution Methods Soichi Takasugi, Koji Tomita, Michio Iwaoka (Tokai Univ.) PS-47 Cutting Out Polygons with Lines from Minimum Axis-aligned Rectangle Pochara Patthamalai, Xuehou Tan (Tokai Univ.)

PS-48 Fiber Tip Heat Source Excited by A Low Power Semiconductor Laser for Clinical Applications

Masahiko Miyara, Yusuke Imai (Tokai Univ.), Takahiro Fujimoto (Clinic F), Naoki Shinyashiki, Kazuyoku Tei, Shigeru Yamaguchi (Tokai Univ.)

PS-49 Identification of Formation Mechanism of Faults Through the 3D Shallow Geological

Structure Models Mapped by Ultra-high-resolution Single-channel Sonic Survey Masatoshi Yagi, Ömer Aydan, Izumi Sakamoto (Tokai Univ.) PS-50 Study of Airflow Patterns within Real and Simplified Models of Nasal Cavities Erny Afiza, Yoko Takakura (Tokai Univ.) PS-51 Research on Four Wheel Independent Steering of an All Wheel Drive In-Wheel Small

Electric Vehicle Muhammad Izhar Ishak, Hirohiko Ogino, Yasuo Oshinoya (Tokai Univ.) PS-52 Temperature and Molecular Weight Dependences of Thermal Diffusion for Aqueous

Solutions of Saccharides Kousaku Maeda, Rio Kita, Naoki Shinyashiki, Shin Yagihara (Tokai Univ.) PS-53 Study on Haptic Rendering for Virtual Palpation System Satoshi Suzuki, Kazuhiko Hamamoto (Tokai Univ.) PS-54 Zero-mass Dirac Hamiltonian of Graphene Tomohisa Uchida (Tokai Univ.), Kazuhiro Yamada (Matsushige Tekken Industory, Ltd.) PS-55 Characterisitics of Bi2Sr2CaCu2O8+x THz Oscillator Stack Fabricated by a Dilute Acid

Solutionoscillator Stack Fabricated by a Dilute Acid Solution Tubasa Nishikata, Takahiro Kato, Yukio Kotaki (Nagaoka Univ. of Tech.), Akira Kawakami (NICT), Kanji

Yasui (Nagaoka Univ. of Tech.)

Thursday, Nov. 7, 2013 Registration Nov. 7, Thursday 9:00 – 13:00 2nd-floor, #17Building Keynote Speech II Nov. 7, Thursday 9:30 – 10:10 Nexus Hall Chair: Dr. Muhamad Kamal Mohammed Amin (MJIIT) Title: Lesson from a Trial for Cooperation of Medicine and Engineering Prof. Ai Kotani (Tokai Univ.) Keynote Speech III Nov. 7, Thursday 10:10 – 10:50 Nexus Hall Chair: Prof. Dr. Satoru Matsumoto (MJIIT) Title: Plasmon-enhanced Vibrational Spectroscopy for the Detection of Dilute Bio-molecules and

Toxic Substances in Water Dr. Tadaaki Nagao (National Institute for Materials Science) Special Session Nov. 7, Thursday 11:20 – 13:00 Nexus Hall Chair: Yoshio Yamamoto (Tokai Univ.) Theme: Japanese-Style Human Resource Development in ASEAN Countries SS-1 Look East Policy: Aspects of the Past 30 Years and Future Challenges Yoshiteru Okamoto (Utsunomiya Univ.) SS-2 Outcome Based Education (OBE) – Malaysia’s Journey in Engineering Education Megat Johari Megat Mohd Noor (MJIIT) SS-3 Group and Global: One Furukawa Initiatives Takahide Kimura (Furukawa Electric Co., LTD.) SS-4 Japanese Small Company's Way of Engineer Development Kenji Fuchiwaki (Hatano Seimitsu Co., LTD.) Mechanical and Precision Engineering (5) Nov. 7, Thursday 11:20 – 12:40 Room A Chair: Aung Lwin Moe (MJIIT) MP-5-1 Simulation and Optimization Studies of Front and Rear Upright in a Suspension System

Under Static Load Conditions N. Raihan Radzi, B. A Aminudin (MJIIT), M. Haniff Mat (ARTEC) MP-5-2 Combustion and Emission Characteristics of FAME Blended Diesel Oil Mohammad Haris Bin Mokhtar, Yoshihiro Uemura, Akihiko Azetsu (Tokai Univ.) MP-5-3 Electrostatic Inkjet Phenomena When the Ejection Angle is Tilted Shigeto Kawata, Masafumi Ogawa, Takumi Hasegawa, Yoshihito Kunugi, Shinjiro Umezu (Tokai Univ.),

Hitoshi Ohmori (Inst. of Physical and Chemical Research)

MP-5-4 Realization of Diamagnetic Levitation of Pencil Leads Yoshinori Narisawa, Tomohiro Akiyama, Takeshi Mizuno, Masaya Takasaki, Yuji Ishino (Saitama Univ.) Electronic System Engineering (3) Nov. 7, Thursday 11:20 – 13:00 Room B Chair: Fuminori Kobayashi (MJIIT) ES-3-1 Development of Simplified Fabrication Technique of Metamaterials Using Toner Resist Shoichi Sato, Takehisa Shibuya, Moriaki Wakaki (Tokai Univ.) ES-3-2 Zinc Oxide Grown on Graphene by Thermal Evaporation: Effects of Substrate Temperatures

and Oxygen Flow Rates Nurul Fariha Ahmad (Univ. Tek. Malaysia), Nurul Izni Rusli (Univ. Malaysia Perlis), Mohamad Rusop

Mahmood (Univ. Tek. MARA), Kanji Yasui (Nagaoka Univ. of Tech.), Abdul Manaf Hashim (Univ.Tek. Malaysia)

ES-3-3 Backside Drill of Si/SiO2 Supporting Structure Using PCB Prototyping Engraver for

Graphene Nanopore Devices Application Nur Hamizah binti Zainal Ariffin, Abdul Manaf Hashim, Hafizal Yahaya (MJIIT) ES-3-4 Graphene Formation from Evaporated Palm Oil Using Dual Tube Chemical Vapor

Deposition System Desrino Jalani (MJIIT), Shaharin Fadzli Abdul Rahman (Univ. Tek. Malaysia), Mohammad Rusop

Mahmood (Univ. Tek. MARA) , Abdul Manaf Hashim (Univ.Tek. Malaysia) ES-3-5 Modeling of Biomedical Information Sensing System USING SystemC-AMS Arif Ullah Khan, Yoshinori Takeuchi, Masaharu Imai (Osaka Univ.) Information Technology and Communications (2) Nov. 7, Thursday 11:20 – 12:40 Room D Chair: A.K.M. Muzahidul Islam (MJIIT) IT-2-1 Multi-Factor Authentication Methods for Mobile Cloud Computing Mojtaba Alizadeh, Wan Haslina Hassan (MJIIT) IT-2-2 Fabrication of V-groove for Optical Interconnects from UV-curable Resin by the

Mask-transfer Self-written Method Tadayuki Enomoto, Yukinobu Soeda, Osamu Mikami (Tokai Univ.) IT-2-3 Construction of Finite State Machine for Myanmar Noun Phrase Myintzu Phyo Aung, Khin Thidar Lynn (Univ. of Computer Studies, Mandalay) IT-2-4 Project-Based Learning Approach Applied to Embedded Software Development Taichi Kajihara, Naohiko Shimizu (Tokai Univ.) Environmental and Green Technology (2) Nov. 7, Thursday 11:20 – 13:00 Room E Chair: Mikio Miyake (JAIST) EG-2-1 Opportunities and Challenges of Commercial Food Waste Management in Malaysia Effie Papargyropoulou, Rory Padfield, Parveen Fatemeh Rupani, Zuriati Zakaria (MJIIT)

EG-2-2 Irradiation Treatment Effects on Hydrogen Storage Alloy Shinnosuke Tokuhira, Shun Ohnuki, Hirohisa Uchida, Yoshihito Matsumura (Tokai Univ.), Hiroshi Abe

(Japan Atomic Energy Agency) EG-2-3 Solid Waste Management in Malaysia: Status, Challenges and Future Strategies Zaipul Anwar Zainu, Wan Md Syukri Wan Mohamad Ali, Ahmad Rahman Songip, Nooh Abu Bakar (MJIIT) EG-2-4 Developing Multiple Linear Regression Model for Dioxin Furan Emission in the

Incineration Process W. Asma Awatif, B. Sabariah, M. Rashid, M. Normah (Univ. Tek. Malaysia) EG-2-5 The Effect of Lime on Ammonia Removal from Leachate of a Schedule Waste Landfill A. Sani, M. Rashid (MJIIT), C.M Hasfalina (Univ. Putra Malaysia) Mechanical and Precision Engineering (6) Nov. 7, Thursday 11:20 – 13:00 Room F Chair: Matsuya Iwao (Nagaoka Univ. of Tech.) MP-6-1 Experimental Study of Safety Supply Flow Rate on a Small Bore Cylindrical Journal Oil

Film Bearing Yuta Naruse, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.) MP-6-2 Optimization of Groove Geometry for Improving Angular Stiffness of Thrust Air Bearing Hayato Sasaki, Yuta Sunami, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.) MP-6-3 Verification of Impact Resistance on Thrust Air Bearing Having Optimized Groove

Geometry Shouhei Yoshino, Hayato Sasaki, Yuta Sunami, Masayuki Ochiai, Hiromu Hashimoto (Tokai Univ.) MP-6-4 A Review on Micro-Explosion Phenomena in Water-in-Diesel Emulsion Fuel Ahmad Muhsin bin Ithnin, Wira Jazair bin Yahya (MJIIT) MP-6-5 Compensation of Stribeck-type Nonlinearity Using Equivalent-Input-Disturbance Approach Qi Shi (Tokyo Univ. of Tech.), Liyu Ouyang (Central South Univ.), Jinhua She, Junya Imani, Yasuhiro

Ohyama (Tokyo Univ. of Tech.) Medical Biotechnology (2) Nov. 7, Thursday 14:00 – 15:20 Nexus Hall Chair: Teruo Matsuzawa (JAIST) MB-2-1 Patterning Collagen Utilizing PELID (Patterning with Electrostatically-injected Droplet)

Method Ryosuke Araki, Shinjiro Umezu (Tokai Univ.), Hitoshi Ohmori (RIKEN) MB-2-2 Measurement of Solution Parameters on Sonication Decellularization Treatment Azran Azhim, Mohammad Shafiq (Univ. Tek. Malaysia), Yuji Morimoto (Physi & Bio- Nano Medi.), Katsuko

Furukawa,Takashi Ushida (Univ. Tokyo) MB-2-3 Simplification of Signal Processing in Magnetic Resonance Temperature Imaging Based on

Spin-Lattice Relaxation Times of Fat Proton Signals Shuhei Morita, Kagayaki Kuroda (Tokai Univ.)

MB-2-4 Visualization of Cerebrospinal Fluid Propagation based on Correlation Time Mapping Satoshi Yatsushiro, Akihiro Hirayama, Mitsunori Matsumae, Hideki Atsumi, Kagayaki Kuroda (Tokai

Univ.) Mechanical and Precision Engineering (7) Nov. 7, Thursday 14:00 – 15:40 Room A Chair: Kei Oya (Tokai Univ.) MP-7-1 Plasma Acceleration Characteristics of a Rectangular Laser-Electromagnetic Acceleration

Thruster Yuji Oigawa, Mizuki Karima, Nao Akashi, Hiroshi Hosokawa, Hideyuki Horisawa (Tokai Univ.), Ikkoh

Funaki (ISAS) MP-7-2 A Pre-Review Study of Ocean Thermal Energy Conversion Cycle with Different Working

Fluids Norazreen Samsuri, Sheikh Ahmad Zaki Shaikh Salim (MJIIT), Md Nor Musa, Abu Bakar Jaafar (Univ.

Tek. Malaysia), Mohamed Sukri Mat Ali (MJIIT) MP-7-3 Harvesting Electric Power from Kinetic Energy Xiaotian Ni, Yoshio Yamamoto (Tokai Univ.) MP-7-4 Designing a Mixed Mode Magnetorheological Cell Mohd Jamalullail Mughni, Saiful Amri Mazlan (MJIIT), Hairi Zamzuri (Univ. Tek. Malaysia) MP-7-5 Auto-Tuning Quadcopter Using Loop Shaping Ahmad Ataka, Hilton Tnunay, M. Qodar Abdurrohman, Yuliyanto Nugroho, Reka Inovan, Adha Cahyadi

(Gadjah Mada Univ.), Yoshio Yamamoto (Tokai Univ.) Electronic System Engineering (4) Nov. 7, Thursday 14:00 – 15:40 Room B Chair: Masaharu Imai (Osaka Univ.) ES-4-1 Energy Minimization for Built-In Self-Test in System On-Chip Ayub Chin Abdullah, Ooi Chia Yee, Nordinah Bt Isamil, Fuminori Kobayashi (MJIIT) ES-4-2 Dynamic Reconfiguration of Circuits Using PSoC Analog FPGAs Fuminori Kobayashi (MJIIT), Shintaro Higuchi (Kyushu Inst. of Tech.), Ooi Chia Yee, Nordinah Binti

Ismail (MJIIT) ES-4-3 Toward a Green Electronic World: A Low Power Design-For-Testability Architecture Mahshid Mojtabavi Naeini, Chia Yee Ooi (MJIIT) ES-4-4 Spectrum Agile Cluster-Based Architecture for Cognitive Radio Ad-hoc Networks Nafees Mansoor, A.K.M. Muzahidul Islam, Mahdi Zareei, Sabariah Baharun, Shozo Komaki (Univ. Tek.

Malaysia) ES-4-5 Run-Time Network-on-Chip Thermal and Power Balancing Mohd Shahrizal Rusli (Univ. Tek. Malaysia), Ooi Chia Yee, Fuminori Kobayashi (MJIIT), Nasir Shaikh

Husin, Muhammad Nadzir Marsono (Univ. Tek. Malaysia)

Information Technology and Communications (3) Nov. 7, Thursday 14:00 – 15:20 Room D Chair: Hiroshi Nakanishi (Osaka Univ.) IT-3-1 Safety Problems of Smartphone Usage While Driving Muhammad Idham Adli bin Musa (Tokyo Univ. of Agriculture and Tech.), Kazumoto Morita, Daisuke

Yamaguchi, Michiaki Sekine (National Traffic Safety and Environment Lab.) IT-3-2 A Compact Thin-Film Monopole Rectangular Patch Antenna for Ultra-Wideband Sutham Satthamsakul (King Mongkut's Inst. of Tech. Ladkrabang) IT-3-3 Rogue Access Points Detection and Localization Techniques Mardiana Mohamad Noor, Wan Haslina (MJIIT) IT-3-4 Control of Multi-Agent Dynamic Systems Toward Stable Matching Mohd Syakirin Ramli, Shigeru Yamamoto (Kanazawa Univ.) Environmental and Green Technology (3) Nov. 7, Thursday 14:00 – 15:40 Room E Chair: Takayoshi Kimura (Kinki Univ.) EG-3-1 Durability Studies of Single Cylinder Diesel Engine Running on Emulsion Fuel Hasannuddin Bin Abd Kadir, Ahmad Muhsin Bin Ithnin, Aizam Shahroni Bin Arshad, Wira Jazair bin

Yahya (MJIIT) EG-3-2 Energy Harvesting Using Vibroacoustic Coupling Phenomenon K. Nishikawa, S. Tanaka, H. Moriyama (Tokai Univ.) EG-3-3 Research Priorities for the Study of Tropical Peatland: a Stakeholder Engagement Exercise

in Malaysia Rory Padfield, Khadijah Mohd Syayuti, Zuriati Zakaria, Effie Papargyropoulou (MJIIT) EG-3-4 Exploring of Induction Condition of Secondary Metabolites Production in Soil Actinomycetes,

Rhodococcus Jostii RHA1 Masanobu Okumura, Li Wen, Hirokazu Ishida (Okayama Univ.), Hirofumi Hara (MJIIT) EG-3-5 Effect of Mechanical and Chemical Extraction Method on Tensile Properties of Pineapple

Leaf Fiber for Soil Cover Application Sarah S (MJIIT), Rahman W. A. W. A (Univ. Tek. Malaysia), Noor Azian M (MJIIT), Nadia A (Univ. Tek.

Malaysia) Mechanical and Precision Engineering (8) Nov. 7, Thursday 14:00 – 15:20 Room F Chair: Yoshihito Matsumura (Tokai Univ.) MP-8-1 Experimental Study of Effect of Web Thickness Variation on Internal Stress in Wound Roll Hikaru Sugiishi, Hiromu Hashimoto (Tokai Univ.) MP-8-2 Internal Stress Analysis of Wound Roll Considering Web Thickness Variation and

Experimental Verification Kazuhisa Yoda, Hiromu Hashimoto (Tokai Univ.) MP-8-3 Measurement of Static Friction Force between Plastic Film and Steel Roller Yasushi Fujiwara, Yuta Sunami, Hiromu Hashimoto (Tokai Univ.)

MP-8-4 Implementation of a Secured Dynamic Wireless Sensor Network in OMNeT++ Modular Lalitha Bhavani Jivanadham, A.K.M. Muzahidul Islam (MJIIT), Yoshiaki Katayama (Nagoya Inst. of

Tech.), Sabariah Baharun, Shozo Komaki (MJIIT) Mechanical and Precision Engineering (9) Nov. 7, Thursday 16:00 – 17:40 Room A Chair: Wira Jazair bin Yahya (MJIIT) MP-9-1 Magnetostrictive Characterization of Supersaturated Fe-Al Alloy Mao Amano, Maki Hashimoto, Yoshiaki Shinohara, Yoshihito Matsumura (Tokai Univ.) MP-9-2 Seismic Vibration Control of a Multi-Story Building Considering Damage Risk of

Accommodated Computer Servers Takanori Ito, Masayuki Kohiyama (Keio Univ.) MP-9-3 Pipe Friction Loss Reduction by Microbubbles -The Relationship between Pipe Friction Loss

and Shearing Force- Satoshi Sekine, Hiroo Okanaga (Tokai Univ.) MP-9-4 A FEM Modal Analysis Study of Exhaust System Using MSC. PATRAN and NASTRAN M.S.Noorazizi, B. A. Aminudin (MJIIT) MP-9-5 Derivation of Optimal Values in Cushion and Back Angles for Lower Limb Blood Flow Saori Sone (Tokai Univ.), Daisuke Sannan (Keio Univ.), Takeo Kato (Tokai Univ.), Yoshiyuki Matsuoka

(Keio Univ.), Hiromu Hashimoto (Tokai Univ.) Electronic System Engineering (5) Nov. 7, Thursday 16:00 – 17:40 Room B Chair: Kanji Yasui (Nagaoka Univ. of Tech.) ES-5-1 Fast Processing Tongue Image Segmentation Algorithm Nur Diyana Kamarudin, Ooi Chia Yee, Nordinah Ismail, Fuminori Kobayashi (MJIIT) ES-5-2 Real-time Web-based Sensor Monitoring and Forecasting System in a Building Mohd Anuar Abu Bakar, Shahrum Shah Abdullah (MJIIT) ES-5-3 A Body Implement Able Early Heart Attack Detection System Ishtiak Al Mamoon, Ahmad Shahrizal Sani, A.K.M Muzahidul Islam, Ooi Chia Yee, Fuminori Kobayashi,

Sabariah Baharun, Shozo Komaki (MJIIT) ES-5-4 Wireless Capsule Endoscopy Image Enhancement Using Anisotropic Contrast Diffusion Rosdiana Shahril, Sabariah Baharun, A.K.M. Muzahidul Islam (Univ. Tek. Malaysia) ES-5-5 Investigation of Gold-Graphene Surface in Surface Plasmon Resonance Biosensor Hamid Toloue, Anthony Ceteno (MJIIT)

Management of Technology (2) Nov. 7, Thursday 16:00 – 17:40 Room C Chair: Mas Bambang Baroto (Univ. Tek. Malaysia) MT-2-1 Prioritization of Balanced Scorecard Aspects Using Analytical Hierarchy Process: A Case

Study of Industrial Organization Neda Jalaliyoon, Nooh Abu Bakar (MJIIT), Hamed Taherdoos (Univ. Tek. Malaysia) MT-2-2 Leadership for Innovation: A One Size Does Not Fit All Al-Junaidi Mohamad, Akbariah Mahdzir (MJIIT) MT-2-3 The Attribute Dimensions on Product Quality, the Effect on Thai Consumer Buying

Decision Pajaree Ackaradejruangsri (Ritsumeikan Asia Pacific Univ.) MT-2-4 The Effect of Lean Manufacturing to Competitive Capability in Product Module Assembly

Process Mohd Yusri Bin Mohd Yusof (MJIIT) MT-2-5 Talent Definition and Talent Review in Talent Management Zumalia Norzailan (MJIIT) Information Technology and Communications (4) Nov. 7, Thursday 16:00 – 17:20 Room D Chair: Toshio Wakabayashi (MJIIT) IT-4-1 A Conceptualization of Intelligent Lab Tutor (ILT) for Virtual Laboratory Norzaidah Md Noh (Univ. Tek. MARA), Rubiyah Yusof (Univ. Tek. Malaysia) IT-4-2 Procedure Guided Crawling and Knowledge Analysing of Syllabuses of Universities Hiroshi Nakanishi (Osaka Univ.), Tetsuo Oka (Tresbind Corp.), Yoshiaki Kanaya (Osaka Univ.) IT-4-3 Extraction of Linguistic Patterns for Feature Identification in Customer Reviews Su Su Htay, Khin Thidar Lynn (Univ. of Computer Studies, Mandalay) IT-4-4 Mobile Cloud Computing in Healthcare Cik Ku Haroswati Che Ku Yahaya, Wan Haslina Hassan (MJIIT) Environmental and Green Technology (4) Nov. 7, Thursday 16:00 – 17:20 Room E Chair: Hirofumi Hara (MJIIT) EG-4-1 Preliminary Survey of Household Energy-use Behaviour in Malaysia Hirda Lailani Khalid, Sheikh Ahmad Zaki Shaikh Salim (MJIIT) , Aya Hagishima (Kyushu Univ.) EG-4-2 Formulation of a New Pre-Coating Material for Fabric Filtration in Air Filtration System Siti Hajar Binti Abd Rahim, M. Rashid, Nurnadia Binti Andenan (MJIIT), Ammar M. Rashid (AMR

Environmental Sdn Bhd) EG-4-3 Comparative Fractional Efficiency Prediction of MR-deDuster H. Norelyza, M. Rashid (MJIIT) EG-4-4 Effect of Applying Negative DC Cathode Bias in RF Magnetron Sputtering Kohei Osuga, Toshinori Yamada, Haruo Shindo, Masao Isomura (Tokai Univ.)

Mechanical and Precision Engineering (10) Nov. 7, Thursday 16:00 – 17:40 Room F Chair: Masao Kohzaki (Tokai Univ.) MP-10-1 Effects of Environmental Gas and Lubricant on Structural Change in Steel Under Rolling

Contact Hiroyoshi Tanaka, Kakeru Enami, Masaaki Hashimoto, Joichi Sugimura (Kyusyu Univ.) MP-10-2 Tribological Behaviours of Austenitic Stainless Steel and OFHC Cu in the Earliest Stage of

Sliding Zaid Ali Subhi (Univ. Tek. Malaysia), Kanao Fukuda (MJIIT), Takehiro Morita, Joichi Sugimura (Kyusyu

Univ.) MP-10-3 High-repetition Rate Operation of a Laser-assisted Pulsed Plasma Thruster Mizuki Karima, Hideyuki Horisawa (Tokai Univ.) MP-10-4 Fabrication and Evaluation of Mechanical Properties of C/C-HfC-SiC Composites Yuki Yano, Kazuya Wada (Tokai Univ.), Takuya Aoki, Toshio Ogasawara (JAXA), Shinjiro Umezu (Tokai

Univ.), Hitoshi Omori (RIKEN) MP-10-5 Characterization and Improvement of a Laser-Assisted Pulsed Plasma Thruster Hiroshi Hosokawa, Osamu Yamada, Haruki Koyabayashi, Hideyuki Horisawa (Tokai Univ.)