Fero Strata product brochure 2013_strata-support-plates

Fero Strata Plates offer optimal surface support when used in conjunction with Fero friction stabilisers, wriggle bolts, solid bolts and cable bolts.

A Division of Fero Group

Strata Support Plates

2 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.

Fero strata plates are designed in-house and quality tested to a high-load capacity to ensure optimal surface support in a range of ground conditions. Each plate type is available in a range of dimensions to suit any bolt type and diameter in the Fero range.

All strata plates are available with hanger lugs for the support of service products and are available untreated or hot-dip galvanised for protection of the plate in corrosive environments. Field testing has proven Fero Strata plates to be highly effective.

Strata plates are manufactured to our strict quality standards, and meet if not exceed Australian quality standards and are subject to stringent in-house quality testing.

Fero Strata has also been developed as a research and development unit and can assist in the development of specific product requirement. The 225 stabiliser plate is an example of this. Having been developed as a cost effective alternative to the duplex stabiliser plate for a specific client the plate is now a staple in the Fero strata plates range.

Contact the Fero Strata technical services team for technical and product advice and operator training for any or all of our products.

Contact the Fero Strata team for more information at [email protected]

1.1 Features

Comprehensive range

Quality tested in-house

Hot-dip galvanised and untreated steel available

Various packing quantities available on request

Supplied bundled and strapped on wooden pallets

All plates incorporate hanging lug for service lines (other than Flat plate)

1.0 Fixing Plates Fero Strata manufactures and supplies a comprehensive range of strata plates for use with Fero friction stabilisers, wriggle bolts, solid bolts, cable bolts and other specialty bolts

3www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.

1.2 Plate Range

Fero strata plates are designed in-house and quality tested to an effective load capacity to provide optimal surface support in a range of ground conditions. Fero strata plates are available to suit any bolt type and diameter in the Fero range.

125 and 150 Stabiliser Plates A general purpose plate, both the 125 and 150 stabiliser plates are manufactured from 4mm material to suit 33mm and 39mm friction stabilisers; and can be used with a 47mm friction stabiliser. The dome assists in stabiliser alignment and provides additional strength. The hanger lug provides support of service products.

300 Strata plate This lighter gauge 1.9mm plate is used when greater surface coverage is required in fractured ground. The plate is manufactured with four pressed rib sections on the outer perimeters of the plate to provide more strength to the lighter gauge material. The 300 strata plate can be used with any size bolt and in conjunction with smaller diameter plate

Duplex Stabiliser Plate The duplex plate is a 4mm thick 125 or 150 stabiliser plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.

200 and 225 Stabiliser Plates A specialised plate, the 200 and 225 stabiliser plate is also manufactured from 4mm material. The 225 stabiliser plate was developed as a cost saving alternative to the duplex stabiliser plate. The 225 plate provides slightly less surface coverage than the duplex plate. However, as it is made entirely from 4mm material, it provides higher grade coverage over a larger surface area than the larger 1.9mm material area of the duplex plate. The plate is designed to deform during the installation process to prevent damage to strata-mesh and to eliminate point loading of the Friction Stabiliser ring. The 200 or 225 plate is typically used with 47 mm stabiliser but can also be used with 33mm and 39mm friction stabiliser. Dual hanger lugs provide extra versatility for support of service products.

www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.

4

Franklin Plate Fero’s Franklin plate is another purpose designed product developed in-house. The Franklin plate is a 5mm ribbed support plate that provides a high load capacity but is more cost effective and stronger than the similar load bearing capacity 8mm dome plate. This high load and ribbed support plate is used in conjunction with a domed barrel and wedge or dome ball washer in the installation of wriggle bolts, solid bolts and cable bolts. The ribs provide additional strength to the 5mm material, enabling the plate to carry loads in excess of 200kN – therefore eliminating the need to use an 8mm dome plate.

Duplex Franklin Plate The Duplex plate is a 5mm thick Franklin plate welded to a 1.9mm thick 300 x 280mm strata plate, the pressed rib sections in the 1.9mm material provide additional strength and minimise deformation upon installation. The Duplex plate gives greater surface coverage when supporting strata-mesh or when used directly on rock surface. User friendly round edges for increased safety and mesh protection.

Dome Plates Dome plates are primarily used when increased load capacity is required. It is the dome shape of this 150 x 8mm general purpose plate that increases the load capacity. Dome plates are primarily used in conjunction with domed barrel and wedge or a dome ball washer in the installation of solid bolts and cable bolts. Fero can also supply Dome plates in a range of thickness and size as per customer requests.

Flat Plates Available in standard sizes of 8-12mm thick and from 150mm to 300mm, with 22mm hole diameter and either one, two or slot holes for tensioning, this general purpose plate is used with flat barrel and wedges in cable bolt installations. Fero can also supply flat plates in a range of thickness and size as per customer requests.


3.0 Physical Properties, Product Codes, Weights & Pack Sizes

Fero Product Code

Fero Product Description

Hole Diameter (mm)

Length x Width (mm)

Material Thickness (mm)

Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

FSP1504-33 150 Stabiliser Plate (33) 35.5 150x150 4 Un-Treated 0.72 1200 865

FSP1504-33G 150 Stabiliser Plate (33) - HDG 35.5 150x150 4 Hot Dip Galvanised 0.78 1200 930











FSP2254-45G 225 Stabiliser Plate (45) - HDG 48 225x225 4 Hot Dip Galvanised 1.70 600 1020



Fero Product Code


Hole Diameter (mm)

Length x Width (mm)


Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

FDP15008 150 Dome Plate x 8mm (32) 32 150x150 8 Un-Treated 1.52 600 910

FDP15008G 150 Dome Plate x 8mm (32) - HDG 32 150x150 8 Hot Dip Galvanised 1.56 600 935

FDP20008 200 Dome Plate x 8mm (32) 32 200X200 8 Un-Treated 2.55 400 1020

FDP200084 200 Dome Plate x 8mm (32) - HDG 32 200x200 8 Hot Dip Galvanised 2.76 400 1105

Stabiliser Plates

Dome Plates

6 www.fero.com.auAll specifications are applicable at the time of publication and may be amended from time to time.

Fero Product Code


Hole Diameter (mm)

Length x Width (mm)


Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

FFP1500822-1 150 Flat Plate x 8mm (22), 1 Hole 1 x 22 150x150 8 Un-Treated 1.42 1000 1415

FFP1500822-2 150 Flat Plate x 8mm (22), 2 Holes 2 x 22 150x150 8 Un-Treated 1.42 1000 1415


FFP1501022-1G 150 Flat Plate x 10mm (22), 1 Hole - HDG 1 x 22 150x150 10 Hot Dip Galvanised 1.79 700 1255


FFP1501022-2G 150 Flat Plate x 10mm (22), 2 Holes - HDG 2 x 22 150x150 10 Hot Dip Galvanised 1.88 700 1315


FFP15012SL-1 150 Flat Plate x 12mm Slot Hole 1 x Slot Hole 150x150 12 Un-Treated 2.14 700 1500















Fero Product Code


Hole Diameter (mm)

Length x Width (mm)


Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

FFRP1504-43 150 Franklin Plate (43) 39 150x150 4 Un-Treated 0.72 1200 865

FFRP1504-439 150 Franklin Plate 43 150x150 4 Hot Dip Galvanised 0.78 1200 930

FFRP1505-43 150 Franklin Plate (43) 43 150x150 5 Un-Treated 0.90 1200 1085

FFRP1505-434 150 Franklin Plate (43)-HDG 43 150x150 5 Hot Dip Galvanised 0.97 1200 1165

Flat Plates

Franklin Plates


Fero Product Code


Hole Diameter (mm)

Length x Width (mm)


Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

FSP324-50 300 Strata Plate x 240 (50) 50 300x240 1.9 Un-Treated 1.17 700 820

FSP324-50G 300 Strata Plate x 240 (50) - HDG 50 300x240 1.9 Hot dip Galvanised 1.25 700 875

FSP324-50PG 300 Strata Plate 240 (50) - Galv 50 300x240 1.9 Galvanised 1.17 700 820FSP328-50 300 Strata Plate (50) 50 300x280 1.9 Un-Treated 1.28 700 895FSP328-50PG 300 Strata Plate (50) - Galv 50 300x280 1.9 Hot dip Galvanised 1.28 700 895

FSP328-50G 300 Strata Plate (50) - HDG 50 300x280 1.9 Galvanised 1.36 700 955

Strata Plates

Fero Product Code


Hole Diameter (mm)

Length x Width (mm)


Surface Finish

Weight Each (kg)

Pack Size

Pack Weight (kg)

Top Bottom Top Bottom

FDSP32815-33300 Duplex Stabiliser Plate (33)

35.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610

FDSP32815-33G300 Duplex Stabiliser Plate (33) - HDG

35.5 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640


42.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610




49.5 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610



FDDP328158-32300 Duplex Dome Plate (32)

32 150 x 150 300 x 280 8 1.9 Un-Treated 2.72 300 815

FDDP328158-32G300 Duplex Dome Plate (32) - HDG

32 150 x 150 300 x 280 8 1.9 Hot dip Galvanised 2.90 300 870

FDFP328154-43300 Duplex Franklin Plate (43)

43 150 x 150 300 x 280 4 1.9 Un-Treated 2.03 300 610

FDFP328154-43G300 Duplex Franklin Plate (43) - HDG

43 150 x 150 300 x 280 4 1.9 Hot dip Galvanised 2.13 300 640

Duplex Plates

A Division of Fero Group

For further information and ordering contact: [email protected]

www.fero.com.au

Corporate Office & Manufacturing Facility WESTERN AUSTRALIA44 Chisholm Crescent Kewdale WA 6105Tel: +618 9453 0000 Fax: +618 9453 0050

Manufacturing Facility QUEENSLAND9 Boron Street Narangba QLD 4504Tel: +617 3888 4533 Fax: +617 3888 4790

Branch Locations AUSTRALIAKalgoorlie WABurnie TASBendigo VICMount Isa QLDTownsville QLD

Documents

Fero Strata product brochure 2013_strata-support-plates