A new generation of mooring bollards

E J Bean

Enterprise House, Harveys Lane, Seething, Norfolk NR15 1EN, United Kingdom

Tel: +44 1508 482691 Fax: +44 1508 482710

Email: sales@fendercare.com www.fendercare.com

FenderCAre divisions & ProduCts

Providing the complete range of mooring solutions from the seabed to the quayside with

a wide range of products all designed, engineered and manufactured to international

standards. The divisions trading these products are as follows

Turners Marine Trading Design, manufacture and supply a full range of

deck equipment including bollards, fairleads,

chocks, rollers and smit brackets.

Hippo Marine Design and manufacture foam elastomer floating

aids to navigation, berthing & mooring as well

as lightweight fender systems for the military,

commercial & leisure sector. Products include

mooring buoys, navigation buoys, anchor pendant

buoys, chain support buoys, sub-surface buoys,

floating foam fenders & vessel fendering systems.

Marine Equipment Supply Supply a complete range of chain, wire & fibre

ropes along with anchors, sinkers, shackles &

other associated mooring hardware.

FenderCare Limited Supply, distribute & operate marine fenders

including Yokohama pneumatic rubber fenders

with or without chain nets. Fenders can be

bought, rented, leased and refurbished via a

24hour service. Also provided are fixed fender

systems, ship to ship transfer hoses & hose testing.

FenderCare IMS Consolidate the supply and through life

service project management of our extensive

range of products and services for safe berthing

and mooring to the shipping and offshore

industries worldwide.

FenderCare Marine The leading global operator of ship-to-ship (STS)

services to the oil and shipping industry. These

services are provided from a network of over 25

worldwide bases managed by offices in the UK,

Singapore, Nigeria and UAE.

FenderCare Naval Solutions Supplies marine equipment to the navies of

the world, including naval lightweight grey

pneumantic rubber fenders, submarine fenders,

RAS equipment, fire fighting equipment, jetty

equipment and shipboard equipment.

Des

ign

ed a

nd

pro

du

ced

by

The

Pro

du

ctio

n H

ou

se -

Tel

: 01

60

3 42

422

2

02 03

E.J. Bean & Co was founded in 1949 by Captain E.J. Bean – a pilot with the Port of London Authority.

Over the course of its history the company has developed an unrivalled reputation in the quayside

mooring marketplace. Today, E J Bean designs & manufactures one of the most comprehensive lines

in spheriodal graphite, cast iron & cast steel marine bollards worldwide. The product range includes

various types & designs of mooring bollards in all sizes and capacities.

tHe neW GenerAtion MoorinG BoLLArds

E J Bean also designs and manufactures custom castings

for special applications. This brochure has been compiled

in order to provide a framework which will allow an engineer

or designer to select, purchase and install bollards which

meet the project requirements.

A thorough mooring analysis should be performed by a

qualified engineer to determine the actual mooring line loads

and the required load rating of the bollard. Load factors for

determining the bollard rating from the mooring line typically

have a safety factor ranging from 1.5 to 3.

The actual load factor used will depend on variables including,

but not limited to, availability of accurate wind and current

data, project specifications, and choice of casting material.

Proper selection of a bollard given a specific loading

requires an understanding of how that load acts on the

casting. T’ Head bollards usually have a large lobe extending

towards the back of the bollard, whereas Twin Horn bollards,

as the name implies, have horns to each side.

All E J Bean bollards are rated for mooring lines acting

under the horns and lobes to a maximum of 45 degrees.

For mooring angles greater than 45 degrees, please contact

us for engineering & design verification.

ProduCt deveLoPMent And testinG

E J Bean is constantly developing existing designs in line with

current legislation for maritime structures. Utilising cast iron,

spheroidal graphite and cast steel, we are able to design bollards

to facilitate the accommodation of larger vessels with more acute

mooring angles at quaysides worldwide.

As part of this development E J Bean have launched the new

Triton range of bollards which was commissioned with the aim

of producing the most cost effective and technically advanced

bollard on the market.

The new range of bollards have been designed using the latest

Finite Element Analysis (FEA) techniques combined with physical

testing to verify the design performance.

04

J

G

D

A E

C

B

triton BoLLArd

The Triton bollard has been developed as the new generation of

mooring bollards.

By utilisation of FEA and physical testing we have been able to optimise the

design of the product to meet the strengths requirements of the market, the

mooring angles of the vessels and in turn offer an economic advantage over

the current bollards on the market.

05

TRITON BOLLARD

Metric tonne Dimensions mm Bolts

A B C D E G J No. Dia.

50 250 555 400 363 340 75 400 4 36

75 311 690 500 465 425 102 500 4 42

100 394 880 625 485 535 120 630 4 48

150 467 1020 720 545 613 125 720 4 56

200 482 1070 750 565 642 130 750 4 64

G

CB

K

E

A

J

DF

H

C

FH

E

D

G

ØAB

J

06 07

tWin Horn BoLLArd

A well-proven design which facilitates mooring & releasing two lines independently

tee HeAd BoLLArd

Probably the most commonly utilised bollard with kind wrap angles & ease

of release.

TwIN hORN BOLLARD

Metric tonne Dimensions mm Bolts

A B C D E F G H J K No. Dia.5 127 57 48 152 19 305 152 76 222 76 4 20

10 178 127 108 362 57 349 305 102 382 115 5 24

15 178 152 118 401 64 400 349 133 420 127 5 24

20 203 203 140 476 70 483 406 165 407 165 5 24

30 254 254 152 533 76 610 572 267 508 184 6 24

40 305 305 152 617 127 610 610 305 610 210 4 36

50/60 317 298 178 597 83 762 660 279 559 229 7 30

75 355 355 191 743 95 851 724 305 761 241 7 36

100 356 356 202 774 114 965 838 356 762 242 7 48

150 432 432 254 851 114 1016 914 381 838 278 7 48

200 432 432 254 857 120 1016 914 381 838 278 7 56

TEE hEAD BOLLARD

Metric tonne Dimensions mm BoltsA B C D E F G H J No. Dia.

10 157 350 305 241 286 127 45 91 248 5 24

15 172 400 350 275 330 135 51 105 300 5 24

20 190 483 410 290 360 145 50 125 360 5 24

30 250 600 540 380 476 190 65 155 460 5 30

50 300 800 650 480 570 245 80 206 600 5 36

60 300 800 650 490 570 245 90 206 600 5 36

75 343 800 720 510 620 260 90 222 650 6 48

100 374 1000 813 600 710 306 100 265 750 7 45

125 376 1000 813 600 710 306 100 265 750 7 48

150 430 1080 900 670 830 350 110 283 800 7 48

200 460 1080 930 685 848 320 125 287 830 7 56

ProteCtive CoAtinGs

Bollards are subjected to some of the most extreme

corrosive conditions. Typical coatings for the protection

of bollards include:

- Black Bitumastic

- Epoxy

- Polyurethane

Bollards should always be supplied from the manufacturer

with at least a rust preventative primer, compatible with the

expected top coating, to protect the product from corrosion

until final coating can be completed on site. Since the installation

includes filling the anchor bolt counter bores with bitumen or

non-shrink grout, it is recommended that the top coat(s) of the

coating system be applied after installation.

MountinG & instALLAtion

All bollards have a recommended anchor diameter and

material grade. The type of anchorage to be supplied will be

based on suitability to the deck design. The bollard manufacturer

should always supply mounting hardware to ensure

conformance to the project specifications.

Cast in Through deck Resin anchor

A new generation of mooring bollards

E J Bean

Enterprise House, Harveys Lane, Seething, Norfolk NR15 1EN, United Kingdom

Tel: +44 1508 482691 Fax: +44 1508 482710

Email: sales@fendercare.com www.fendercare.com

FenderCAre divisions & ProduCts

Providing the complete range of mooring solutions from the seabed to the quayside with

a wide range of products all designed, engineered and manufactured to international

standards. The divisions trading these products are as follows

Turners Marine Trading Design, manufacture and supply a full range of

deck equipment including bollards, fairleads,

chocks, rollers and smit brackets.

Hippo Marine Design and manufacture foam elastomer floating

aids to navigation, berthing & mooring as well

as lightweight fender systems for the military,

commercial & leisure sector. Products include

mooring buoys, navigation buoys, anchor pendant

buoys, chain support buoys, sub-surface buoys,

floating foam fenders & vessel fendering systems.

Marine Equipment Supply Supply a complete range of chain, wire & fibre

ropes along with anchors, sinkers, shackles &

other associated mooring hardware.

FenderCare Limited Supply, distribute & operate marine fenders

including Yokohama pneumatic rubber fenders

with or without chain nets. Fenders can be

bought, rented, leased and refurbished via a

24hour service. Also provided are fixed fender

systems, ship to ship transfer hoses & hose testing.

FenderCare IMS Consolidate the supply and through life

service project management of our extensive

range of products and services for safe berthing

and mooring to the shipping and offshore

industries worldwide.

FenderCare Marine The leading global operator of ship-to-ship (STS)

services to the oil and shipping industry. These

services are provided from a network of over 25

worldwide bases managed by offices in the UK,

Singapore, Nigeria and UAE.

FenderCare Naval Solutions Supplies marine equipment to the navies of

the world, including naval lightweight grey

pneumantic rubber fenders, submarine fenders,

RAS equipment, fire fighting equipment, jetty

equipment and shipboard equipment.

Des

ign

ed a

nd

pro

du

ced

by

The

Pro

du

ctio

n H

ou

se -

Tel

: 01

60

3 42

422

2