EXPLOSIVES CCCOMPLIANCEOMPLIANCEOMPLIANCE Godley, … · P.O. Box 765 Godley, TX 76044-0765 Tel: +1 (817) 551-0660 Fax: +1 (817) 396-4584 e-mail: [email protected] 1.4 EXPLOSIVES

Page 1

HAZLIST Update To: HAZLIST Distribution

From: David W. Boston

CC: OOT Responsible Persons (Godley), OOT Product Update Notifications Group,

OOT-APRV-055 Igniter Group

File: 0100.055

Date: July 16, 2019

Re: DOT Approval Notice: OOT-APRV-055 Igniter Family, EX2008120360

4th Revision adds Type E (Power charge igniter) to approval

DOT has added Type E (Power charge igniter) to the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. This revision affects future products added to this family and does not change the classification previously assigned to members of the OOT-APRV-055 Igniter Family

Table 1 provides approval specifics and Table 2, marking and labeling instructions.

Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family

Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) Type E (Power charge igniter) As depicted on drawing OOT-APRV-055A, Rev.3

EX-Number: EX2008120360, 4th Revision

ID Number: UN0454

Proper Shipping Name: Igniters

Division and Compatibility Group:

1.4S

Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A, Rev.3

P.O. Box 765 Godley, TX 76044-0765 Tel: +1 (817) 551-0660 Fax: +1 (817) 396-4584 e-mail: [email protected]

1.4EXPLOSIVES

1

S

OOOWENWENWEN

CCCOMPLIANCEOMPLIANCEOMPLIANCE

SSSERVICES, ERVICES, ERVICES, IIINC.NC.NC.

http://www.ocsresponds.com/ref/hazlist/db/drawings/oot-aprv-055_igniter_family.pdf

http://www.ocsresponds.com/ref/hazlist/db/exletters/EX2008120360,_OOT-APRV-055_Igniter_Family.pdf


Page 2 http://www.ocsresponds.com/ref/hazlist/db/hazlistupdates/IgniterFamily.pdf

Packaging: As depicted in drawing OOT-APR0V-055B

Outer: UN 4G fiberboard box, each containing not more than fifty (50) inner packagings uniformly segregated from one another and the box sidewalls by not less that three layers of corrugated fiberboard divider pieces and with top and bottom fiberboard pads.

Inner: Boxes, chipboard, each containing one igniter.

Marking and Labeling Requirements:

See Table 2

Placarding 1: EXPLOSIVE 1.4

Authorized Modes of Transportation:

Highway, rail, vessel, passenger air

Segregation Requirements (highway, only) 2

Explosives of Compatibility group S3 may be loaded on the same vehicle with explosives of Compatibility groups B, C, D, E, F, G4, H, J, K, N, and/or S . See Notes.

Explosives of Compatilitiy group S may not be loaded on the same vehicle with explosives of Compatibility groups A and/or L.

Federal Insurance Requirements 5:

Security Plan Requirements 6:

Placardable quantities only

Routing Requirements 7: Placardable quantities only

Other Requirements: None

1 49 CFR 172.500 – 172.560 2 49 CFR 177.848, for other modes consult ICAO/IATA DGR or IMO IMDG Code 3 See 49 CFR 177.835(g) when transporting detonators 4 When transporting explosives of C, D, and/or E with G, explosive substances may not be on the same vehicle 5 49 CFR 387.1 – 387.17 6 49 CFR 172.800 – 172.822 7 49 CFR 397.61 – 397.77

1.1, 1.2, 1.3 Explosives 1.4 Explosives

GVWR Interstate Intrastate Interstate Intrastate

≥10,001 LBS $5 million $5 million $1 million

<10,001 LBS $5 million $1 million $1 million

http://www.ocsresponds.com/ref/hazlist/db/hazlistupdates/IgniterFamily.pdf


http://www.ecfr.gov/cgi-bin/retrieveECFR?gp=&SID=f529fafe1fdda233076272d63d1da839&r=PART&n=49y2.1.1.3.9#49:2.1.1.3.9.6

http://www.ecfr.gov/cgi-bin/retrieveECFR?gp=&SID=f529fafe1fdda233076272d63d1da839&r=PART&n=49y2.1.1.3.14#49:2.1.1.3.14.3.39.1


http://www.fmcsa.dot.gov/regulations/title49/part/387




Notes:

Placarding

Placarding of combination (multiple compatibility groups) shipments

Compatibility group letters are not required on placards used for transport by highway or rail; however, they may be used, if desired.

Compatibility group letters are required on placards used for transport by air or vessel.

Placarding considerations are significantly simpler if using Division placards (placards without the Compatibility group letter).

The DANGEROUS placard cannot be used when transporting only 1.4C and 1.4D on a transport vehicle

Placard considerations for combination shipments when utilizing Compatibility group placards.

For any shipment of C, D, and/or E, you must use a compatibility group E placard.

For any shipment of C, D, and/or E with G articles (excluding fireworks), you must use a

compatibility group E placard.

For any shipment of C, D, and/or E with N, you must use a compatibility group D placard.

Placard considerations for combination shipments when utilizing Division placards.

For any shipment of an authorized combination of compatibility groups (see Segregation), use the lowest numbered (highest risk) placard. Examples:

1.1D + 1.4D = 1.1 1.2C +1.3C + 1.4D = 1.2 1.2C + 1.4G = 1.2 1.4C + 1.4D + 1.4S = 1.4



Table 2: Marking and Labeling Summary (UN0454 /1.4S Products)

Device Carton/Container Inner Packing (Tray/Bag)

Outer Package

EXPLOSIVE - EXPLOSIF - DANGER - DÉTONATEUR - BLASTING CAP

CE Mark (certified items only)

Part number

Name of manufacturer

Location, date, and shift of manufacture

DANGER – EXPLOSIVE – KEEP FROM CHILDREN

Part number




EU CLP (OOT-GHS-1.4)

Part number


EX number

Net quantity & total package net explosive weight


Hazard label

Proper shipping name

ID number

Name and address of consignee or consignor

UN POP specification mark


CE Label (certified items only)


Page 1




OOT-APRV-055 Igniter Group, Ian Morrison (OOT UK), Bernadette Reyes (SCE)

File: 0100.055

Date: September 16, 2015


3rd Revision adds drawing number to product description (authorized BKNO3 as component in Types A and C)

DOT has issued a 3rd Revision to EX2008120360. In this revision, a reference to the applicable drawing number and revision level has been added to the family description provided in th PRODUCT DESCRIPTION/PART NUMBER section of the EX document. This revision affects future products added to this family and does not change the classification previously assigned to members of the OOT-APRV-055 Igniter Family.

Table 1 provides approval specifics and Table 2, marking and labeling instructions.


Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) As depicted on drawing OOT-APRV-055A, Rev.2

EX-Number: EX2008120360, 3rd Revision

ID Number: UN0454



1.4S



1.4EXPLOSIVES

1

S

OOOWENWENWEN











See Table 2



Highway, rail, vessel, passsenger air























Notes:

Placarding













1.1D + 1.4D = 1.1 1.2C +1.3C + 1.4D = 1.2 1.2C + 1.4G = 1.2 1.4C + 1.4D + 1.4S = 1.4



Outer Package



Part number




Part number




Part number



Hazard label


ID number

EX number






Page 1




OOT-APRV-055 Igniter Group, Ian Morrison (OOT UK), Bernadette Reyes (SCE)

File: 0100.055

Date: April 30, 2014


Type D (Swing Jet Release) added to approval

DOT has added Type D (Swing Jet Release) to the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. Table 1 provides approval specifics and Table 2, marking and labeling instructions.


Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) As depicted on drawing OOT-APRV-055A, Rev.1

EX-Number: EX2008120360, 2nd Revision

ID Number: UN0454



1.4S



1.4EXPLOSIVES

1

S

OOOWENWENWEN











See Table 2



Highway, rail, vessel, passsenger air























Notes:

Placarding













1.1D + 1.4D = 1.1 1.2C +1.3C + 1.4D = 1.2 1.2C + 1.4G = 1.2 1.4C + 1.4D + 1.4S = 1.4



Outer Package



Part number




Part number




Part number



Hazard label


ID number

EX number








Page 1



CC: OOT Responsible Persons (Godley), OOT-APRV-055 Igniter Group, Ian Morrison (OOT UK),

Bernadette Reyes (SCE)

File: 0100.055

Date: April 6, 2009


DOT has approved the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. Table 1 provides approval specifics and Table 2, marking and labeling instructions.


Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) As depicted on drawing OOT-APRV-055A

EX-Number: EX2008120360

ID Number: UN0454



1.4S

Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A


1.4EXPLOSIVES

1

S

OOOWENWENWEN






Page 2

Packaging: As depicted in drawing OOT-APRV-055B




See Table 2

Other Requirements: N/A

Notes: NA



Outer Package



Part number




Part number




Part number



Hazard label


ID number

EX number








Documents

EXPLOSIVES CCCOMPLIANCEOMPLIANCEOMPLIANCE Godley, … · P.O. Box 765 Godley, TX 76044-0765 Tel: +1 (817) 551-0660 Fax: +1 (817) 396-4584 e-mail: [email protected] 1.4 EXPLOSIVES