8/11/2019 Evolution Deluxe 6161 Full Brim Non-Vent Wheel
1/2
TECHNICALSPECIFICATION
HEAD PROTECTION
SHELL:High Density
Polyethylene (HDPE)
WEBBING SUSPENSION:HDPE Strap & Webbing Clips withPolyester
Webbing Straps
EVOLUTION DELUXE 6161 FULL BRIM HARD HAT - WHEEL RATCHET -
NON-VENT
TMFULL
BRIM
6100evoluti
on
WHEEL RATCHET:The Evolution Wheel Ratchetis the new easy to use
wheelratchet adjustment system tocreate a firm comfort fit with
added security
CHAMLON SWEATBAND:Egyptian cotton core with porousPU coating for
maximum sweat
absorption. PH neutral,
dermatologically tested
CONFORMITY
Conforms to EN397:2012 & EN50365:2002
Also conforms to ANSI/ISEA Z89.1-2009 Type I Class E (Class
CVented)
Meets optional Class E Electrical Insulation requirements
Wheel Ratchet for wide size range adjustment - High comfort
fit
Suspension can be removed and refitted for reverse wearing
Vented and Non-Vented Options. Compatible with Evospec
Company personalisation available by printing
FULL BRIM:The full brim provides additionalprotection to the
neck and ears
against sun, glare, rain, snow andfalling debris.
EVO6161 FULL BRIM IS A TRUE EVOLUTION OF THE LONG ESTABLISHED
MK2 & MK3 HARD HATS
CLEANING & MAINTENANCE
The shell may be cleaned with soap and warm water and driedwith
a soft cloth
The hard hat should not be cleaned with chemical or
abrasivecleaners
The hard hat should be stored out of direct sunlight
The hard hat should be stored away from chemicals and extremesof
temperature
INSTRUCTIONS FOR USE
Fit hard hat on head and fasten strap to ensure fit
For adequate protection this hard hat must be worn with thewheel
ratchet at the rear of the head
Ensure the hard hat is adjusted to the size of the users
head
MANUFACTURING FOR SAFETYWWW.JSP.CO.UK
T
[email protected]: +44 (0)1993 826050
Issued 02/05/13, V1
8/11/2019 Evolution Deluxe 6161 Full Brim Non-Vent Wheel
2/2
LIMITATIONS OF USEProtection will only be offered if the hard
hat is fittedcorrectly
Any hard hat subjected to severe impact should bereplaced
immediately. Do not apply paint, solvents oradhesive labels except
in accordance with instructionsfrom the manufacturer
The suspension, when in contact with the skin maycause allergic
reactions to susceptible individuals. Ifthis occurs leave the
hazard area, remove the helmetand seek medical advice
The attention of users is also drawn to the dangersof modifying
or removing any of the originalcomponent parts, other than as
recommended by themanufacturer
STANDARDS EN397:2012EN50365:2002ANSI/ISEA Z89.1- 2009, Type I
Class E(Class C Vented)
YesYesYes
PERFORMANCE Lower Temp (-22F)Reverse Donning
Yes 54 JoulesYes: Class E20,000 Volts
SHELLMATERIAL
HDPERecyclable
YesYes
SUSPENSIONMATERIAL
HDPETextile
YesYes
OPTIONS Universal Accesories
Reflective CR2 optionIntegrated Eyewear
Yes
YesYes
SUSPENSIONSYSTEMOPTIONS
JSP 3DWheel Ratchet6 pts
YesYesYes
CHINSTRAP 4 pts Yes
LOGOOPTIONS
FrontRearSideMOQ Logo
YesYesYes20
HARD HAT FEATURES
TECHNICALSPECIFICATION
HEAD PROTECTION
MANUFACTURING FOR SAFETYWWW.JSP.CO.UK
T
[email protected]: +44 (0)1993 826050
HEIGHT:17.9 Inches
WIDTH:12.6 Inches
LENGTH:21.65 Inches
01 White 02 Yellow 03 Green 05 Blue 06 Red 09 Bright
Lime Green
10 Bright
Orange
EVO6161 FULL BRIM IS A TRUE EVOLUTION OF THE LONG ESTABLISHED
MK2 & MK3 HARD HATS
EVOLUTION DELUXE 6161 FULL BRIM HARD HAT - WHEEL RATCHET -
NON-VENT
Issued 02/05/13, V1
HARD HAT COLORS
All colours available on non-vented version
Only White and Yellow colour options available onthe vented
version
DIMENSIONS OF OUTER PACKAGING
Quantity: 10
Weight: 152oz (Approx.)
DIMENSIONS OF HARD HAT
Size: 20 - 25 Inches
Weight: 15.2oz (Approx.)
