DR.FIXIT EPOXY BONDING AGENT 2-part solvent free epoxy based bonding agent DESCRIPTION Dr.Fixit Epoxy Bonding Agent is 2 part solvent free epoxy based bonding agent. The unique formulation gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc., to old sound concrete. AREA OF APPLICATION • As a bonding agent for bonding old to new concrete / mortar •To extend or repair structural concrete •Can be used as a bonding agent of glazed brick, tiles, steel & structural members FEATURES & BENEFITS • Easily applied as a bonding agent for old to new concrete / mortar • Bond strength exceeds the tensile strength of concrete • Excellent adhesive strength • Comfortable open time to work with • Has very low shrinkage property INSTRUCTION OF USE • The surface for application must cleaned and free from dirt, grease, oil, and loose particles before application of Dr.Fixit Epoxy Bonding Agent. Any laitance etc. must be thoroughly removed by mechanical means Mixing & Application • The hardener part should be poured totally into the base. The two parts must be thoroughly mixed with a low speed mixer (150 to 200 rpm for about 3 to 4 minutes) to get uniform colour of the mixed material. Mixed material should be brushed applied on the prepared surface. • Overlay of concrete / mortar has to be placed on Dr.Fixit Epoxy Bonding Agent when it is tacky. If Dr.Fixit Epoxy Bonding Agent has dried, apply a 2 nd coat before placing the concrete / mortar. PRECAUTIONS & LIMITATIONS • Dr.Fixit Epoxy Bonding Agent should be applied with gloves and avoid contact with skin or eyes. • Any splashes into the eyes or skin have to be immediately washed only with clean water and medical advice should be taken. TECHNICAL INFORMATION • Appearance : Grey colour viscous liquid • Mix proportion : 1 : 0.87 (Base : Hardener) • Specific Gravity : 1.01 ± 0.02 • Pot Life : 1 hour at 30 o C • Coverage : 2 - 3 m 2 / kg depending on the substrate • Shelf life : 12 months when stored properly in a dry and cool place • Flexural Strength : 350 ksc at 7 days • Tensile Strength : 200 ksc at 7 days • Shear Strength : 200 ksc • Application Temp. : 15 o C to 35 o C PACKING : 9 kg DF EPOXY BONDING AGENT P1/1 ENG 16/06/08 Disclaimer : The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other materials used and on-site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained. The Company does not assume any liability or any consequential damage for unsatisfactory results, arising from the use of our products. 699 Modernform Tower 15 FL., Srinakarin Rd., Suan Luang, Bangkok 10250, THAILAND. Tel +662 722-8535 Fax +662 722-8381 website www.pidilitebamco.com E-mail [email protected] Pidilite Bamco Limited.

Epoxy bonding agent Eng 1-1 - Pidilite Bamco Bonding Agent Eng.pdfDR.FIXIT EPOXY BONDING AGENT 2-part solvent free epoxy based bonding agent DESCRIPTION Dr.Fixit Epoxy Bonding Agent

Download PDF Report

Upload
phungdiep
View
228
Download
3

Embed Size (px)

Citation preview

DR.FIXIT EPOXY BONDING AGENT2-part solvent free epoxy based bonding agent

DESCRIPTIONDr.Fixit Epoxy Bonding Agent is 2 part solvent free epoxy based bonding agent. The unique formulation gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc., to old sound concrete.

AREA OF APPLICATION• As a bonding agent for bonding old to new concrete / mortar•To extend or repair structural concrete•Can be used as a bonding agent of glazed brick, tiles, steel & structural members

FEATURES & BENEFITS• Easily applied as a bonding agent for old to new concrete / mortar• Bond strength exceeds the tensile strength of concrete • Excellent adhesive strength• Comfortable open time to work with • Has very low shrinkage property

INSTRUCTION OF USE• The surface for application must cleaned and free from dirt, grease, oil, and loose particles before application of Dr.Fixit Epoxy Bonding Agent. Any laitance etc. must be thoroughly removed by mechanical meansMixing & Application• The hardener part should be poured totally into the base. The two parts must be thoroughly mixed with a low speed mixer (150 to 200 rpm for about 3 to 4 minutes) to get uniform colour of the mixed material. Mixed material should be brushed applied on the prepared surface.• Overlay of concrete / mortar has to be placed on Dr.Fixit Epoxy Bonding Agent when it is tacky. If Dr.Fixit Epoxy Bonding Agent has dried, apply a 2nd coat before placing the concrete / mortar.

PRECAUTIONS & LIMITATIONS• Dr.Fixit Epoxy Bonding Agent should be applied with gloves and avoid contact with skin or eyes.• Any splashes into the eyes or skin have to be immediately washed only with clean water and medical advice should be taken.

TECHNICAL INFORMATION• Appearance : Grey colour viscous liquid• Mix proportion : 1 : 0.87 (Base : Hardener)• Specific Gravity : 1.01 ± 0.02• Pot Life : 1 hour at 30 oC• Coverage : 2 - 3 m2 / kg depending on the substrate• Shelf life : 12 months when stored properly in a dry and cool place• Flexural Strength : 350 ksc at 7 days• Tensile Strength : 200 ksc at 7 days • Shear Strength : 200 ksc• Application Temp. : 15 oC to 35 oC

PACKING : 9 kg

Y B

DIN

G A

P1/

1 E

16/

06/0

Disclaimer :The product information & application details given by the company & its agents has beenprovided in good faith & meant to serve only as a general guideline during usage. Users areadvised to carry out tests & take trials to ensure on the suitability of products meeting theirrequirement prior to full scale usage of our products. Since the correct identification of theproblems, quality of other materials used and on-site workmanship are factors beyond ourcontrol, there are no expressed or implied guarantee / warranty as to the results obtained. TheCompany does not assume any liability or any consequential damage for unsatisfactory results,arising from the use of our products.

699 Modernform Tower 15 FL., Srinakarin Rd., Suan Luang, Bangkok 10250, THAILAND. Tel +662 722-8535 Fax +662 722-8381website www.pidilitebamco.com E-mail [email protected]

Pidilite Bamco Limited.