Enterprise™ Bed Range Details

2

3

Contents5 Introduction

6 Falls Prevention

7 Infection Control

8 Pressure Area Care

10 Engineering / Servicing

11 Moving and Handling

12 Ease of Use

14 Bed Range

15 Features & Technical Data

4

electric profiling hospital bed range

5

The Enterprise™ bed range from Huntleigh Healthcare has been designed with risk management, ease of use andservicing in mind, and offers unique benefits in key areas:

Falls Prevention: The beds have an exceptional low height of 30cm.

Infection Control: The beds were designed with the aim of being the easiest in the world to clean and decontaminate.

Pressure Area Care: The patented Bio-Contour® profiling system gives superior pressure reduction.

Service / Engineering: Designed for “pit stop maintenance” – open accessibility means changes can be carried out in situ within a few minutes by one person.

Moving and Handling: The Enterprise beds are lightweight and very easy to manoeuvre.

6

Falls Prevention

The gaps in and around the safety sides are fully compliant with IEC 60601-2-38 (the International Standard for

Electrically Actuated Hospital Beds), to minimise entrapment risks. A zero transfer gap when the split safety sides are

folded down allows easier patient transfers.

Safety Sides

Falls prevention is a major risk management

consideration in hospitals today. Patient falls

can cause injuries to both staff and patients.

This can result in physical and psychological

distress and increased costs due to staff

sickness, longer hospital stays and litigation.

The exceptional low height of 30cm

significantly reduces the risk of injuries due

to falls.

Underbed lighting improves patient safety and security by illuminating the bed exit area.

7

Infection ControlThe Enterprise beds were designed with the specific aim of being the easiest hospital beds to clean in the world.

Open accessibility allows easy cleaning of all areas. They were purposely designed without a base cover to allow

full access for complete decontamination.

Lightweight, removable mattress platform sheets and head and foot panels give open access for cleaning

Steam cleaner compatible Smooth surfaces Linen shelf to reduce cross-infection risks

The unique patented Bio-Contour 3-Dimensional Profiling

System offers outstanding pressure, shear and friction

reduction. It consists of:

• Curved mattress platform

• Intelligent profiling system

• Unique combination of mattress platform movements

Curved Mattress Platform

The lateral curve on the Enterprise bed mattress platform

mimics the shape of a person’s back much more closely

than a flat surface. This results in lower pressures in the

middle of the patient’s back, both when the bed is flat

and through all profiles.

Intelligent Profiling System

To prevent the patient sliding down the bed, when the

auto-contour button is pressed, on descent the knee-

break stays raised until the backrest is at the same

angle. Both the backrest and knee-break then descend

together until they reach a flat position simultaneously.

Mattress Platform Movements

The mattress platform of the Enterprise beds mimics the

way a person’s tissues stretch as they move from a lying

to a sitting position and reduces mattress compression

at the seat section. This results in reduced pressure,

shear and friction, improved comfort and improved

postural support.

Pressure Maps (beds fully profiled)

Perimeter

The unique perimeter gives total mattress retention,

which secures the mattress in its correct position through

all profiles. Additionally, because the mattress is always

retained in the correct position, correct gaps are

maintained, reducing entrapment risks.

Interface pressure

8

Pressure Area CareBio-Contour 3-Dimensional Profiling System

Low High

Standard Bed

Enterprise

9

10

Engineering/ServicingThe Enterprise beds have been designed to give very easy access for maintenance and service. Open accessibility

means changes such as actuators, control box, battery and castors/brakes can be carried out in situ within a few

minutes by one person.

Easy brake /castor maintenance

Self lubricating joints

Easy battery removal/change

Plug in controls allow easy changes

Open accessibility

The head and the foot end panels, mattress platform and split safety

sides are made from blow-moulded plastic which is easy to clean,

resistant to aggressive chemicals, lightweight and very robust.

Easy actuator changes

11

Moving and Handling

The Enterprise beds significantly reduce moving and handling risks to staff by safely accommodating heavier patients

and being very easy to manoeuvre.

The safe working load of the beds is 250kg, to safely cater for heavier patients without the need to source specialist

equipment.

12

Ease of UseErgonomic, Intuitive Controls

Stability

The exceptionally rigid construction of the bed means

that the platform is very stable, even at the highest height

with a heavier patient. This allows procedures

to be carried out at the bed’s highest height safely

and efficiently.

Built in angle indicators on backrest and kneebreak Carer selection of calves raised/lowered

The bed controls have been ergonomically positioned to allow easy access by the patient and carer. They have been

specifically designed to be intuitive and very easy to use.

The unique position and shape of the patient control panel on the split safety sides was established following extensive

research into ergonomics and anthropometrics. It stays in the same position relative to the patient regardless of

backrest angle, allowing continuous trouble-free access and ease of use.

CPR

CPR levers are located on both sides of the bed. When

either of these is activated, the backrest lowers manually

and the other bed sections flatten electrically, placing

the bed in a flat, mid-height position suitable for CPR. In

addition, a CPR button on the Attendant Control Panel

flattens the bed electrically to a mid height position.

13

14

Bed Range

Head/ Foot Panel Infill Colour Options

Enterprise 8000

Blue Sea Blue Lilac

Green Peach Mushroom

Enterprise 5000

15

8000 5000

Split safety sides with built-in patient and nurse controls •

Folding safety sides with pendant controls •

Electrically operated backrest, knee-break and height adjustment • •

Electrically operated Trendelenberg / Reverse Trendelenberg tilt ±12° ±12°

Electrically operated calf section adjustment • •

Carer selection of calf section raised / lowered • •

Chair position at lowest height • •

Auto-contour button • •

Auto-CPR button • •

Battery back-up • •

Bio-Contour profiling system • •

Lockout switches on Attendant Control Panel • •

Dual-sided CPR levers • •

Height range 30 – 77 cm 30 – 77 cm

Angle indicators for backrest and knee-break • •

Built-in bed extension with mattress retainer • •

Pull-out linen shelf with duvet retainer • •

Removable head and foot panels with choice of colour infills • •

Locking mechanism for head and foot panels (•) (•)

Removable plastic deck sheets • •

Zero transfer gap •

Linked braking / steering system with four braking castors • •

125mm single-wheel castors • •

150mm single wheel castors, 150mm twin-wheel castors (•) (•)

Under-bed light • (•)

Backlighting on controls • •

Safe Working Load 250 kg 250 kg

Overall length 228 cm 228 cm

Overall length – extended 240 cm 240 cm

Platform size 88 x 203 cm 88 x 203 cm

Overall width (safety sides up) 104 cm 102 cm

Overall width (safety sides down) 99 cm 102 cm

• Standard (•) Optional

The Enterprise beds are compatible with a wide range of pressure reducing and pressure relieving mattresses from HuntleighHealthcare.

The Enterprise bed range has been designed to comply with IEC60601-2-38 (The International Standard for Electrically ActuatedHospital Beds)

Electrical Data

Power in: 3.0A max. at 230V a.c. 50/60 HzElectrical shock protection: Class 1, Type BLiquid ingress protection: IP54Batteries: 2 x 12V series connected, sealed, rechargeable, lead/acid gel 1.2 amp hrs

Features

HUNTLEIGH HEALTHCARE LIMITED Nesbit Evans Products Division310-312 Dallow Road, Luton, Bedfordshire, LU1 1TD, United KingdomT: +44 (0)1582 413104 F: +44 (0)1582 459100E: sales.admin@huntleigh-healthcare.comRental 24hr Helpline Lo-call T: 08457 342000W: www.huntleigh-healthcare.com

Registered No: 942245 England. Registered Office: As Above.

©Huntleigh Healthcare Limited 2006

® and ™ are trademarks of Huntleigh Technology PLC

As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. GENLIT 001/07 LIT 977/01