EMERALD SYNTHETIC BLEND MOTOR OILExtra protection and peace of mind when compared with conventional oil

Copyright © 2019 | Emerald Lubricants | An O’Rourke Petroleum ProductPerformance and Protection You Can Trust.

EMERALD 5W-20 SYNTHETIC BLEND - API SN PLUSEMERALD 5W-30 SYNTHETIC BLEND - API SN PLUSEMERALD 10W-30 SYNTHETIC BLEND - API SN PLUS

PROTECTION controls friction and wear 65% greater than the latest API requirements.1

POWER provides a strong film barrier to control friction, resist wear, and prevent metal-to-metal contact.

ENDURANCE stands up to heat and shearing which extends oil life. 1 As measured against the Sequence IV Average Cam Wear Limit for API SN.

EMERALD LUBRICANTS are engineered to provide greater overall value and unsurpassed protection for today’s engines and equipment designs.

Meets or exceeds API SN PLUS and ILSAC GF-5 requirements.

APPLICATIONS

Provides extra performance benefits for passenger cars, light trucks and sport utility vehicles, plus new and rebuilt engines.

(800) 683.1331www.orpp.com

BENEFITS

Delivers better oxidation and deposit control. New engine design strategies for some OEMs result in higher operating temperatures and the need for greater protection.

Includes additives technology that helps to keep engines clean.

Meets or exceeds US and import car and light truck warranty requirements for most automotive gasoline engines currently in use.

E M E R A L D L U B E S

EMERALD SYNTHETIC BLEND MOTOR OIL TYPICAL PHYSICAL PROPERTIES

Gravity, OAPISpecific Gravity at 60OF (15.6OC) Flash Point, OCFlash Point, OFViscosity at 40OC, cStViscosity at 100OC, cStViscosity IndexPour Point, OC (OF)Cold Cranking Simulator at (OC), cPHigh Temperature / High Shear Vis at 100OC, cPHigh Temperature / High Shear Vis at 150OC, cPNoack Volatility, % lossColorZinc, wt. %Phosphorus, wt. %Calcium, wt. %Sulfur, wt. %Magnesium, wt. %Boron, wt. %Molybdenum, wt. %Sulfated Ash, wt. %Nitrogen, wt. %Pumping Viscosity at (OC), cPShear Stability, Final Viscosity in cStFoam Seq. I (Tendency/Stability), mLFoam Seq. II (Tendency/Stability), mLFoam Seq. III (Tendency/Stability), mLHigh Temperature Foaming, static foamTBN, mgKOH/g

ASTM D287ASTM D4052ASTM D92ASTM D92ASTM D445ASTM D445ASTM D2270ASTM D5950ASTM D5293ASTM D6616ASTM D5481ASTM D6375ASTM D1500ASTM D5185ASTM D5185ASTM D5185ASTM D4951ASTM D5185ASTM D5185ASTM D5185ASTM D874ASTM D4629ASTM D4684ASTM D6278ASTM D892 (Opt. A)ASTM D892 (Opt. A)ASTM D892 (Opt. A)ASTM D6082 (Opt. A)ASTM D2896

33.090.859720640351.338.738149-45OC (-49OF)6305 (-30OC)6.012.7214.830.0850.0770.1320.30.0430.0180.0040.920.08623,600 (-35OC)7.310/00/00/030/07.0

33.320.858521842466.9211.11159-45OC (-49OF)6119 (-30OC)6.943.1414.230.0850.0770.1320.30.0430.0180.0040.920.08628,400 (-35OC)8.50/00/00/020/07.0

32.370.863520640363.8510.35150-42OC (-44OF)4000 (-25OC)7.043.0814.530.0850.0770.1320.30.0430.0180.0040.920.08615,900 (-30OC)8.540/00/00/020/07.0

5W-20 SYNTHETIC BLENDAPI SN PLUS

5W-30 SYNTHETIC BLENDAPI SN PLUS

10W-30 SYNTHETIC BLENDAPI SN PLUS

API SJ, SH, SG, SF, SE, SD, SCAPI SL, SMAPI SN, SN PLUSChrysler MS-6395Chrysler MS-10797Ford WSS M2C945-B1, M2C945-A, M2C930-A, M2C153GM 6094MILSAC GF-4, GF-3, GF-2, GF-1ILSAC GF-5VM Standard 504 00VM Standard 507 00

Meets RequirementsMeets RequirementsApprovedMeets RequirementsMeets RequirementsMeets RequirementsMeets RequirementsMeets RequirementsApproved--

Meets RequirementsMeets RequirementsApprovedMeets Requirements-Meets RequirementsMeets RequirementsMeets RequirementsApprovedApprovedApproved

Meets RequirementsMeets RequirementsApprovedMeets Requirements--Meets RequirementsMeets RequirementsApproved--

Copyright © 2019 | Emerald Lubricants | An O’Rourke Petroleum ProductPerformance and Protection You Can Trust.

(800) 683.1331www.orpp.com

INDUSTRY / OEM APPROVALS

TYPICAL RESULTSTEST METHODPROPERTIES

E M E R A L D L U B E S