Embed Size (px)
Citation preview
ElectronicsQUICK REFERENCE GUIDE
HydraForce offers a rugged line of electronic valve drivers, control units, operator interfaces and sensors designed specifically for the demanding mobile hydraulic equipment markets.
Electronic Valve Drivers (ExDR) – Whether you need simple closed-loop speed control, a fan control, or lift/lower, extend/retract controls, there is a HydraForce ExDR valve driver for your application. Vigorously tested and durable enough for mobile applications, complete with SAE J1939 and CANopen networking, these drivers fit into any system architecture. Choose from pre-programmed (EFDR, EGDR, ETDR, EVDR) or custom configurable (ECDR) models. These units are configured with the HydraForce-authored software, HF-Impulse.
Electronic Control Units (ECU) – For more complex control functions, the HydraForce family of Elec-tronic Control Units (ECUs) feature flexible input and output configurations. These CE-certified units are programmed with CoDeSys but the ECU-0809 can also be programmed with HF-Impulse.
THE ECDR FAMILY:
THE ECU FAMILY:
THE EVDR FAMILY:
Model Part No. Output/Input CANECDR-0101A 4204820 1/1 -
EGDR-0101A 4204850 1/1 -
ETDR-0101A 4204810 1/1 -
EVDR-0101A 4204800 1/1 -
ECDR-0201A 4204740 2/1 1
Model Part No. Output/Input CANECU-0809 4000350 8/9 1
ECU-0809A 4002722 8/9 2
ECU-0814A 4002724 8/14 2
ECU-2415A 4000352 24/15 2
ECU-2820A 4000383 28/20 2
ECU-2434A 4002712 24/34 2
ECU-3233A 4000343 32/33 4
Model Part No. Output/Input CANEFDR-0201A 4204710 2/1 1
EVDR-0201A 4204700 2/1 1
ECDR-0203A 4208230 2/3 1
ECDR-0506A 4208560 5/6 1
This document is Copyright 2018 HydraForce Inc. All rights reserved. HydraForce and the HydraForce logo are registered trademarks of HydraForce Inc. • Electronic Quick Ref Guide • 10/2018
ECDR-0506A
ECDR-0203AECDR-0201A
EVDR-0101A
ECDR-0101A
ETDR-0101A
EVDR-0201A
ECU-2415A ECU-3233A
ECU-2820A ECU-2434A
ECU-0809
ECU-0814A
ElectronicsQUICK REFERENCE GUIDE
Operator Interfaces – Make your controls easy for the operator to use with a display or button panel switch.
Pressure Sensors (ERP) – All pressure sensor outputs from 0.5 to 4.5 V.
Sensors – Add a pressure, temperature, or frequency sensor to your machine application with the knowledge that it can handle the pressure and heat of hydraulic mobile equipment.
Displays CAN Button Panels
Temperature Sensor
AC Frequency Detector
OPERATOR INPUT:
SENSORS:
Model Part No. Supply Voltage Pressure RatingERP035-RM-ID-06 4000650 5 V 0 to 34 bar (500 psi)
ERP1 03-RM-ID-06 4000651 5 V 0 to 103 bar (1500 psi)
ERP207-RM-ID-06 4000652 5 V 0 to 207 bar (3000 psi)
ERP345-RM-ID-06 4000653 5 V 0 to 345 bar (5000 psi)
ERP414-RM-ID-06 4000654 5 V 0 to 424 bar (6000 psi)
ERP035-B-ID-06 4000655 9 to 36 V 0 to 34 bar (500 psi)
ERP103-B-ID-06 4000656 9 to 36 V 0 to 103 bar (1500 psi)
ERP207-B-ID-06 4000657 9 to 36 V 0 to 207 bar (3000 psi)
ERP345-B-ID-06 4000658 9 to 36 V 0 to 345 bar (5000 psi)
ERP414-B-ID-06 4000659 9 to 36 V 0 to 414 bar (6000 psi)
This document is copyright 2018 HydraForce Inc. All rights reserved. HydraForce and the HydraForce logo are registered trademarks of HydraForce Inc. • Electronic Quick Ref Guide • 10/2018
Model Part No. No. of SwitchesECBP-4 4000384 4
ECBP-5 4000385 5
ECBP-6 4000386 6
ECBP-7 4000387 7
ECBP-8 4000388 8
Model Part No. Temp Range Output Signal
ERT-120 4206200 -40 to 150 C (-40 to 300 F)
5428 to436 to Ω
Model Part No. Input Frequency RangeEACD-1 4208010 0 to 130 Hz
Model Part No. Display Size Outputs/Inputs Video InputsA3S 4000400 109 mm/4.3 in -/- -
A3F Touchscreen 4000401 109 mm/4.3 in 3/4 1
A6S 4000407 177 mm/7 in 1 -
A6F Touchscreen 4000408 177 mm/7 in 3/4 1
For more information about HydraForce Electronic Product: visit www.hydraforce.com/electronics or contact the following: North America, Asia and South America: Call 1-800-682-6875 Email [email protected] and Europe: Call 44-121-333-1800 Email [email protected]
A3Display Unit
A6Display Unit
(A3F shown) (A6F shown)
ECBP CANButton Panel
ERP-PressureSensor
EACD-1Frequency Detector
ERT TempSensor
