DSH 700 / 900 · Hilti DSH 700 / 900 hand-held petrol saws Hilti DSH 700 / 900 hand-held petrol saws The DSH 900-40 makes light work of cutting concrete pipes with a thickness of

Simply a cut above.

Hilti. Outperform. Outlast.

Hand-held petrol saws

Ordering designation

DSH 700 35 hand-held petrol saw

Petrol saw, tool set, set of consumable parts, operating instructions



Accessories

DSH 1l two-stroke oil Semi-synthetic oil in a practical dispensing/measuring bottle

DSH consumable parts kit Containing: 2 air filters, 1 spark plug, 1 fuel filter, 5 starter cords

DSH container For storing and transporting the petrol saw and accessories

DSH-FSC floor saw cart The practical accessory for extensive floor sawing

DWP-10 water supply unit For virtually dustless cutting

DSH hard hat With built-in ear protectors and face shield

Electric diamond cutters for use on mineral materials and steel

High-performance angle grinders for surface finishing

Powerful breakers for a wide variety of tough chiseling jobs

Blades and discs perfectly matched to Hilti machines for maximum performance and productivity

Productivity plus

HiltiDSH 700 / 900hand-held petrol saws


Blades and cutting discs

Superior Performance diamond blade for cutting concrete, synthetic or natural stone. Diameters 350 and 400 mm

Universal diamond blade for cutting concrete, synthetic or natural stone. Diameters 350 and 400 mm

Hilti (Aust.) Pty Ltd I Level 5, 1G Homebush Bay Drive I Rhodes I NSW 2138 I T 131 292 I F 1300 135 042 I www.hilti.com.au


Sparkling performance.Hilti diamond blades help your petrol saw achieve top performance and maximum productivity.

LIMITED

Engine and exhaust:A powerful match.Thanks to the tuned resonance exhaust, maximum power is developed at low revs and output remains virtually constant over the entire speed range. High torque in con-junction with diamond blades and abrasive discs perfectly matched to the machine’s characteristics guarantee exceptionally high cutting performance.

Performance data

DSH 700 DSH 900DSH 700 35 DSH 900 40

Blade / disc diameter (mm) 350 400Max. cutting depth (mm) 125 150Rated power (kW) 3.5 4.3Recommended dust control system DWP 10 water supply unitTriaxial vibration (m/s2) 4.7/5.0 5.2/4.5Weight (kg) 11.5 11.9Tank capacity (l) 0.9 0.9Right of technical changes reserved.



The DSH 900-40 makes light work of cutting concrete pipes with a thickness of up to 150 mm.

Fast and accurate cutting of concrete or masonry blocks on the job site using the Hilti DSH.

Advantages

•Maintenance-freecycloneairfilter•Semi-automaticdrivebelttensioning•2-strokeenginewithexhaustpressure

wave tuning•Integratedguidewheels•Combinedhalf-throttleandchokelever•Electronicallycontrolledignitiontiming•Variableblademount•Vibrationabsorptionsystem

Highlights

Long service intervals, low fuel consumption, consumable kit included with every tool purchase. Considerably cuts operating costs.

The DSH 900-40 in action on the DSH-FSCfloorsawcart.

Start, cut – job done. Cut quickly while cutting your costs. Experience freedom and exceptionally fast cutting power with the new Hilti DSH hand-held petrol saws. Cutting performance at up to 150mm depth, combined with the reliability and reduced operating costs you expect from Hilti make these machines perfect companions on every job site.

Working range

Pow

er in

kW

Engine speed

Hilti DSH 700

Applications

•Cuttingconcrete,andnaturalstonewith complete independence from electric supplies

•Cuttingcurbstonesandpavingslabsto size

•Perimetercutsinasphaltandconcrete•Cuttingexpansionjointsinfresh

concrete•Cuttingpre-castconcretecomponents

and blocks to size•Cuttingoutopeningsinbrickor

concrete walls

Simply a cut above.


Hand-held petrol saws

Ordering designation





Accessories

DSH 1l two-stroke oil Semi-synthetic oil in a practical dispensing/measuring bottle

DSH consumable parts kit Containing: 2 air filters, 1 spark plug, 1 fuel filter, 5 starter cords

DSH container For storing and transporting the petrol saw and accessories

DSH-FSC floor saw cart The practical accessory for extensive floor sawing

DWP-10 water supply unit For virtually dustless cutting

DSH hard hat With built-in ear protectors and face shield

Electric diamond cutters for use on mineral materials and steel

High-performance angle grinders for surface finishing

Powerful breakers for a wide variety of tough chiseling jobs

Blades and discs perfectly matched to Hilti machines for maximum performance and productivity

Productivity plus



Blades and cutting discs

Superior Performance diamond blade for cutting concrete, synthetic or natural stone. Diameters 350 and 400 mm

Universal diamond blade for cutting concrete, synthetic or natural stone. Diameters 350 and 400 mm

Hilti (Aust.) Pty Ltd I Level 5, 1G Homebush Bay Drive I Rhodes I NSW 2138 I T 131 292 I F 1300 135 042 I www.hilti.com.au


Documents

DSH 700 / 900 · Hilti DSH 700 / 900 hand-held petrol saws Hilti DSH 700 / 900 hand-held petrol saws The DSH 900-40 makes light work of cutting concrete pipes with a thickness of