PyroGuard™ FR garments are made with

a tough, breathable, light weight, and cloth like

material. The material is wood pulp free for added

durability. Wood pulp disintegrates when exposed to

water or liquids. The material is topically treated with a

phosphate-based flame retardant chemical. The addition

of flame retardant chemistry causes the fabric to char at

temperatures below the fabric’s ignition point. This action

deprives flames with a fuel source and provides a rigid

structure for the component polymers to adhere to. The

result is no flaming or molten drip.

* PyroGuard™ FR garments are intended to be worn over primary flame resistant apparel and are flame retardant treated.

• Disposable garments that protect primary FR apparel

• Passes NFPA 701, 1989 and 1999 methods

• Generous sizing to prevent rip-outs

• Protect primary FR apparel from dirt, grease, and

non-toxic liquids

• High MVTR for increased worker comfort

2400 SKYLINE DR., SUITE 400 MESQUITE, TX 75149 1-800-345-5972int-enviroguard.com

© 2010 International Enviroguard, Inc.

2400 SKYLINE DR.SUITE 400 MESQUITE, TX 75149 1-800-345-5972int-enviroguard.com

Properties Testing Test Method Results

Basic Weight PFG Method 73.3 GSM

Grab / Tensile ASTM D5034-2001MD 34 lbs.XD 26 lbs.

Vertical Flammability NFPA 701 1989 Small Scale Pass

NFPA 701 1999 Pass

INITIAL TECHNICAL DATA

• Water Repellent• Flame Retardant• Wood Pulp Free

© 2010 International Enviroguard, Inc.

AVAILABLE GARMENTS

#9015

Hood only Coverall with elastic wrist and ankle25 per case

#9019

Hood and Boot coverall with elastic wrist25 per case

#9012

Standard Coverall with elastic wrist and open ankle25 per case

REV02012010