DIN規格 --- 2019-10月新刊情報20607:2019); German version EN ISO 20607:2019 27,324円(本体24,840円) DIN EN ISO 4869-1:2019 Acoustics - Hearing protectors - Part 1: Subjective

DIN 2019-10 新刊情報(1/14page)

DIN規格 --- 　 2019-10 月　新刊情報　 ---

規格番号原文表題

DIN EN 14564:2019 Tanks for transport of dangerous goods - Terminology; German version EN 14564:2019 27,324円 (本体24,840円)

DIN EN ISO 14880-1:2019

Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019);German version EN ISO 14880-1:2019

21,318円 (本体19,380円)

DIN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Termsand definitions for surface defects on material measures (ISO 25178-73:2019); Germanversion EN ISO 25178-73:2019

18,018円 (本体16,380円)


DIN 5452-2:2019Aerospace series - Unmanned aircraft systems (UAS) - Part 2: Requirements forremote pilots

18,018円 (本体16,380円)

DIN EN 16844:2019Aesthetic medicine services - Non-surgical medical treatments; German version EN16844:2017+A2:2019

32,692円 (本体29,720円)

DIN EN 17229:2019Fitness centres - Requirements for centre amenities and operation - Operational andmanagerial requirements; German version EN 17229:2019

19,756円 (本体17,960円)

DIN EN 303364-3:2019

Primary Surveillance Radar (PSR) - Harmonised Standard for access to radio spectrum- Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500MHz to 10 000 MHz (X band) (Endorsement of the English version EN 303 364-3 V1.1.1(2019-07) as a German standard)

3,828円 (本体3,480円)


DIN ISO 12858-3:2019Optics and optical instruments - Ancillary devices for geodetic instruments - Part 3:Tribrachs (ISO 12858-3:2005)

18,018円 (本体16,380円)


DIN EN 13697:2019

Chemical disinfectants and antiseptics - Quantitative non-porous surface test for theevaluation of bactericidal and/or fungicidal activity of chemical disinfectants used infood, industrial, domestic and institutional areas - Test method and requirementswithout mechanical action (phase 2, step 2); German version EN 13697:2015+A1:2019

26,026円 (本体23,660円)

日本規格協会グループ

＊規格はICS分類別に掲載しております。分類は1つの規格に対して複数付けられる場合があります。　そのため、一覧の規格数は実際の出版規格数より多くなっていることがございますのでご注意ください。＊ここに掲載している規格は原則としてドイツ語版です。＊ご注文は末尾の注文書をご利用ください。

01 総論．用語．標準化．ドキュメンテーション

定価(本体価格)

07 数学．自然科学


11 医療技術


03 社会学．サービス．経営組織及び管理．行政．運輸


JSA Japanese Standards Association ＊本表記載の規格のご購入につきましては、当協会本部までFAXにてご注文願います。


DIN EN 14476:2019Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of virucidal activity in the medical area - Test method and requirements(Phase 2/Step 1); German version EN 14476:2013+A2:2019

28,556円 (本体25,960円)

DIN EN 14683:2019Medical face masks - Requirements and test methods; German version EN14683:2019+AC:2019

21,318円 (本体19,380円)

DIN EN 14885:2019Chemical disinfectants and antiseptics - Application of European Standards forchemical disinfectants and antiseptics; German version EN 14885:2018

36,652円 (本体33,320円)

DIN EN 16844:2019Aesthetic medicine services - Non-surgical medical treatments; German version EN16844:2017+A2:2019

32,692円 (本体29,720円)

DIN EN 303520:2019

Short Range Devices (SRD) - Ultra Low Power (ULP) wireless medical capsuleendoscopy devices operating in the band 430 MHz to 440 MHz - Harmonised Standardfor access to radio spectrum (Endorsement of the English version EN 303 520 V1.2.1(2019-06) as a German standard)

3,828円 (本体3,480円)

DIN EN ISO 16054:2019Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2019);German version EN ISO 16054:2019

16,368円 (本体14,880円)


DIN EN 1127-1:2019Explosive atmospheres - Explosion prevention and protection - Part 1: Basic conceptsand methodology; German version EN 1127-1:2019

29,964円 (本体27,240円)

DIN EN 13274-2:2019Respiratory protective devices - Methods of test - Part 2: Practical performancetests; German version EN 13274-2:2019

16,368円 (本体14,880円)


DIN EN 15269-1:2019Extended application of test results for fire resistance and/or smoke control for door,shutter and openable window assemblies, including their elements of building hardware- Part 1: General requirements; German version EN 15269-1:2019

18,018円 (本体16,380円)

DIN EN 15659:2019Secure storage units - Classification and methods of test for resistance to fire - Lightfire storage units; German version EN 15659:2019

18,018円 (本体16,380円)

DIN EN 16190:2019Soil, treated biowaste and sludge - Determination of dioxins and furans and dioxin-likepolychlorinated biphenyls by gas chromatography with high resolution mass selectivedetection (HR GC-MS); German version EN 16190:2018

28,556円 (本体25,960円)

DIN EN 17255-1:2019Stationary source emissions - Data acquisition and handling systems - Part 1:Specification of requirements for the handling and reporting of data; German versionEN 17255-1:2019

28,556円 (本体25,960円)

DIN EN 1822-1:2019High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performancetesting, marking; German version EN 1822-1:2019

21,318円 (本体19,380円)

DIN EN 1869:2019 Fire blankets; German version EN 1869:2019 18,018円 (本体16,380円)

DIN EN 45558:2019General method to declare the use of critical raw materials in energy-related products;German version EN 45558:2019

26,026円 (本体23,660円)

13 環境．健康予防．安全




DIN EN 50436-4*VDE0406-4:2019

Alcohol interlocks - Test methods and performance requirements - Part 4: Connectionand digital interface between the alcohol interlock and the vehicle; German version EN50436-4:2019

20,666円 (本体18,788円)

DIN EN IEC 61496-3*VDE 0113-203:2019

Safety of machinery - Electro-sensitive protective equipment - Part 3: Particularrequirements for active opto-electronic protective devices responsive to diffuseReflection (AOPDDR) (IEC 61496-3:2018); German version EN IEC 61496-3:2019

30,089円 (本体27,354円)

DIN EN ISO 20607:2019Safety of machinery - Instruction handbook - General drafting principles (ISO20607:2019); German version EN ISO 20607:2019

27,324円 (本体24,840円)

DIN EN ISO 4869-1:2019Acoustics - Hearing protectors - Part 1: Subjective method for the measurement ofsound attenuation (ISO 4869-1:2018); German version EN ISO 4869-1:2018

21,318円 (本体19,380円)

DIN EN ISO 4869-2:2019Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted soundpressure levels when hearing protectors are worn (ISO 4869-2:2018); German versionEN ISO 4869-2:2018

21,318円 (本体19,380円)

DIN ISO 4126-10:2019Safety devices for protection against excessive pressure - Part 10: Sizing of safetyvalves for gas/liquid two-phase flow (ISO 4126-10:2010)

31,262円 (本体28,420円)

DIN VDE 0833-2Berichtigung 1*VDE0833-2 Berichtigung1:2019

Alarm systems for fire, intrusion and hold up - Part 2: Requirements for fire alarmsystems; Corrigendum 1


DIN EN 50496*VDE0848-496:2019

Determination of workers' exposure to electromagnetic fields and assessment of risk ata broadcast site; German version EN 50496:2018

14,473円 (本体13,158円)

DIN EN ISO 11204:2019

Acoustics - Noise emitted by machinery and equipment - Determination of emissionsound pressure levels at a work station and at other specified positions applyingaccurate environmental corrections (ISO 11204:2010); German version EN ISO11204:2010

31,262円 (本体28,420円)

DIN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Termsand definitions for surface defects on material measures (ISO 25178-73:2019); Germanversion EN ISO 25178-73:2019

18,018円 (本体16,380円)

DIN ISO 12858-3:2019Optics and optical instruments - Ancillary devices for geodetic instruments - Part 3:Tribrachs (ISO 12858-3:2005)

18,018円 (本体16,380円)


DIN EN IEC 60746-4:2019

Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen inwater measured by membrane-covered amperometric sensors (IEC 60746-4:2018);German version EN IEC 60746-4:2019

26,026円 (本体23,660円)

DIN EN ISO 15549:2019Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019);German version EN ISO 15549:2019

18,018円 (本体16,380円)

17 度量衡及び測定．物理的現象


-

19 試験





DIN EN ISO 15480:2019Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO15480:2019); German version EN ISO 15480:2019

14,740円 (本体13,400円)

DIN EN ISO 7053:2019Fasteners - Hexagon washer head tapping screws (ISO 7053:2019); German version ENISO 7053:2019

14,740円 (本体13,400円)

DIN ISO 3547-2:2019Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters(ISO 3547-2:2017)

18,018円 (本体16,380円)

DIN ISO 3547-3:2019Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations(ISO 3547-3:2017)

16,368円 (本体14,880円)

DIN ISO 3547-4:2019 Plain bearings - Wrapped bushes - Part 4: Materials (ISO 3547-4:2017) 11,374円 (本体10,340円)


DIN 16728:2019Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X)- Determination of the degree of crosslinking through rheological measurement of thestorage modulus; Text in German and English

18,018円 (本体16,380円)

DIN 16892:2019Crosslinked polyethylene (PE-X) pipes - General quality requirements, testing; Text inGerman and English

18,018円 (本体16,380円)

DIN 16893:2019 Crosslinked polyethylene (PE-X) pipes - Dimensions; Text in German and English 18,018円 (本体16,380円)

DIN 28150:2019 Divided lapped flange for glass lined welding necks - PN 10 8,030円 (本体7,300円)

DIN 3866 Berichtigung1:2019

Refrigeration; threaded stem; 90ｰ flared flanges for solderless compression couplingsrated for PN 40; Corrigendum 1

DIN 8906 Berichtigung1:2019

PN 40 flared flange solderless compression couplings for use in refrigerating systems;Corrigendum 1


DIN EN 16436-2:2019Rubber and plastics hoses, tubing and assemblies for use with propane and butane andtheir mixture in the vapour phase - Part 2: Assemblies; German version EN 16436-2:2018

19,756円 (本体17,960円)

DIN EN ISO 14456:2019Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO14456:2015 + Amd.1:2019); German version EN ISO 14456:2016 + A1:2019

21,318円 (本体19,380円)

-

-

21 一般的に利用される機械的システム及びその構成要素


23 一般的に利用される流体システム及びその構成要素





DIN 6911:2019 Hexagon socket screw keys with pilot 9,768円 (本体8,880円)

DIN IEC/TR 63176*VDE0810-176:2019

Process analysis technology systems as part of safety instrumented systems (IEC TR63176:2019)

13,831円 (本体12,574円)


DIN EN 17066-1:2019Insulated means of transport for temperature sensitive goods - Requirements andtesting - Part 1: Container; German version EN 17066-1:2019

22,968円 (本体20,880円)


DIN EN 45558:2019General method to declare the use of critical raw materials in energy-related products;German version EN 45558:2019

26,026円 (本体23,660円)

DIN EN 60188:2019High-pressure mercury vapour lamps - Performance specifications (IEC 60188:2001);German version EN 60188:2001 + A11:2019

33,924円 (本体30,840円)

DIN EN 60335-2-95*VDE 0700-95:2019

Household and similar electrical appliances - Safety - Part 2-95: Particularrequirements for drives for vertically moving garage doors for residential use (IEC60335-2-95:2011, modified + A1:2015 + A2:2017); German version EN 60335-2-95:2015 + A1:2015 + A2:2019

16,295円 (本体14,814円)

DIN EN 60691*VDE0821:2019

Thermal-links - Requirements and application guide (IEC 60691:2015 + COR1:2016 +A1:2019); German version EN 60691:2016 + A1:2019

20,666円 (本体18,788円)

DIN EN 62560*VDE0715-13:2019

Self-ballasted LED-lamps for general lighting services by voltage 50 V -Safety specifications (IEC 62560:2011, modified + corrigendum Jan. 2012 + A1:2015,modified + A1:2015/Cor. 1:2015 + Cor. 2:2015); German version EN 62560:2012 +A1:2015 + A11:2019

16,882円 (本体15,348円)

DIN EN IEC 60076-22-3*VDE 0532-76-22-3:2019

Power transformers - Part 22-3: Power transformer and reactor fittings - Insulatingliquid to air heat exchangers (IEC 60076-22-3:2019); German version EN IEC 60076-22-3:2019

12,368円 (本体11,244円)

DIN EN IEC 60076-22-4*VDE 0532-76-22-4:2019

Power transformers - Part 22-4: Power transformer and reactor fittings - Insulatingliquid to water heat exchangers (IEC 60076-22-4:2019); German version EN IEC60076-22-4:2019

14,473円 (本体13,158円)

DIN EN IEC 60376*VDE0373-1:2019

Specification of technical grade sulfur hexafluoride (SF) and complementary gasesto be used in its mixtures for use in electrical equipment (IEC 60376:2018); Germanversion EN IEC 60376:2018

10,936円 (本体9,942円)

DIN EN IEC 60947-7-4*VDE 0611-7-4:2019

Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCBterminal blocks for copper conductors (IEC 60947-7-4:2019); German version EN IEC60947-7-4:2019

17,501円 (本体15,910円)

DIN EN IEC 61058-2-6*VDE 0630-2-6:2019

Switches for appliances - Part 2-6: Particular requirements for switches used inelectric motor-operated hand-held tools, transportable tools and lawn and gardenmachinery (IEC 61058-2-6:2018); German version EN IEC 61058-2-6:2019

12,368円 (本体11,244円)


25 生産工学


27 エネルギー及び熱伝達工学


29 電気工学



DIN EN IEC 62386-220*VDE 0712-0-220:2019

Digital addressable lighting interface - Part 220: Particular requirements for controlgear - Centrally supplied emergency operation (device type 19) (IEC 62386-220:2019);German version EN IEC 62386-220:2019

13,167円 (本体11,970円)

DIN VDE 0100-420*VDE0100-420:2019

Low voltage electrical installations - Part 4-42: Protection for safety - Protectionagainst thermal effects (IEC 60364-4-42:2010, modified + A1:2014); Germanimplementation HD 60364-4-42:2011 + A1:2015

17,501円 (本体15,910円)


DIN EN 16602-70-60:2019

Space product assurance - Qualification and Procurement of printed circuit boards;English version EN 16602-70-60:2019, only on CD-ROM

90,134円 (本体81,940円)

DIN EN 45559:2019Methods for providing information relating to material efficiency aspects of energy-related products; German version EN 45559:2019

22,968円 (本体20,880円)

DIN EN 61076-1:2019Connectors for electronic equipment - Product requirements - Part 1: Genericspecification (IEC 61076-1:2006 + A1:2019); German version EN 61076-1:2006 +A1:2019

27,324円 (本体24,840円)

DIN EN IEC 60122-4:2019

Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors (IEC60122-4:2019); German version EN IEC 60122-4:2019

22,968円 (本体20,880円)

DIN EN IEC 60825-12*VDE 0837-12:2019

Safety of laser products - Part 12: Safety of free space optical communicationsystems used for transmission of information (IEC 60825-12:2019); German version ENIEC 60825-12:2019

16,882円 (本体15,348円)

DIN EN IEC 61496-3*VDE 0113-203:2019

Safety of machinery - Electro-sensitive protective equipment - Part 3: Particularrequirements for active opto-electronic protective devices responsive to diffuseReflection (AOPDDR) (IEC 61496-3:2018); German version EN IEC 61496-3:2019

30,089円 (本体27,354円)

DIN EN ISO 14880-1:2019

Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019);German version EN ISO 14880-1:2019

21,318円 (本体19,380円)


DIN EN 300328:2019Wideband transmission systems - Data transmission equipment operating in the 2,4GHz band - Harmonised Standard for access to radio spectrum (Endorsement of theEnglish version EN 300 328 V2.2.2 (2019-07) as a German standard)

3,828円 (本体3,480円)

DIN EN 300392-7:2019Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 7: Security(Endorsement of the English version EN 300 392-7 V3.5.1 (2019-07) as a Germanstandard)

3,828円 (本体3,480円)

DIN EN 300674-2-2:2019

Transport and Traffic Telematics (TTT) - Dedicated Short Range Communication(DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHzto 5 815 MHz frequency band - Part 2: Harmonised Standard for access to radiospectrum - Sub-part 2: On-Board Units (OBU) (Endorsement of the English versionEN 300 674-2-2 V2.2.1 (2019-06) as a German standard)

3,828円 (本体3,480円)

DIN EN 303364-3:2019

Primary Surveillance Radar (PSR) - Harmonised Standard for access to radio spectrum- Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500MHz to 10 000 MHz (X band) (Endorsement of the English version EN 303 364-3 V1.1.1(2019-07) as a German standard)

3,828円 (本体3,480円)

DIN EN 303520:2019

Short Range Devices (SRD) - Ultra Low Power (ULP) wireless medical capsuleendoscopy devices operating in the band 430 MHz to 440 MHz - Harmonised Standardfor access to radio spectrum (Endorsement of the English version EN 303 520 V1.2.1(2019-06) as a German standard)

3,828円 (本体3,480円)

31 エレクトロニクス


33 電気通信工学．オーディオ及びビデオ工学




DIN EN 55016-1-2*VDE0876-16-1-2:2019

Specification for radio disturbance and immunity measuring apparatus and methods -Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices forconducted disturbance measurements (CISPR 16-1-2:2014 + A1:2017); Germanversion EN 55016-1-2:2014 + A1:2018

31,697円 (本体28,816円)

DIN EN 61291-5-2Berichtigung 1:2019

Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification foroptical fibre amplifiers (IEC 61291-5-2:2017/COR1:2019); German version EN 61291-5-2:2017/AC:2019-06

DIN EN IEC 60793-1-49*VDE 0888-249:2019

Optical fibres - Part 1-49: Measurement methods and test procedures - Differentialmode delay (IEC 60793-1-49:2018); German version EN IEC 60793-1-49:2018

17,501円 (本体15,910円)

DIN EN IEC 60794-1-31:2019

Optical fibre cables - Part 1-31: Generic specification - Optical cable elements -Optical fibre ribbon (IEC 60794-1-31:2018); German version EN IEC 60794-1-31:2018

21,318円 (本体19,380円)

DIN EN IEC 60794-4*VDE 0888-111-1:2019

Optical fibre cables - Part 4: Sectional specification - Aerial optical cables alongelectrical power lines (IEC 60794-4:2018); German version EN IEC 60794-4:2018

13,167円 (本体11,970円)

DIN EN IEC 61300-2-4:2019

Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-4: Tests - Fibre or cable retention (IEC 61300-2-4:2019); German version EN IEC 61300-2-4:2019

21,318円 (本体19,380円)

DIN EN IEC 61326-3-2*VDE 0843-20-3-2:2019

Electrical equipment for measurement, control and laboratory use - EMC requirements- Part 3-2: Immunity requirements for safety-related systems and for equipmentintended to perform safety-related functions (functional safety) - Industrialapplications with specified electromagnetic environment (IEC 61326-3-2:2017);German version EN IEC 61326-3-2:2018

17,501円 (本体15,910円)

DIN EN IEC 61753-1:2019

Fibre optic interconnecting devices and passive components - Performance standard -Part 1: General and guidance (IEC 61753-1:2018 + COR1:2019); German version ENIEC 61753-1:2018 + AC:2019

40,612円 (本体36,920円)

DIN EN IEC 62005-9-4:2019

Fibre optic interconnecting devices and passive components - Reliability - Part 9-4:High power qualification of passive optical components for environmental category C(IEC 62005-9-4:2018); German version EN IEC 62005-9-4:2018

21,318円 (本体19,380円)

DIN EN IEC 62343-3-4:2019

Dynamic modules - Part 3-4: Performance specification templates - Multicast opticalswitches (IEC 62343-3-4:2018); German version EN IEC 62343-3-4:2018

24,640円 (本体22,400円)

DIN EN IEC 63032:2019Fibre optic interconnecting devices and passive components - Fibre optic tuneablebandpass filters - Generic specification (IEC 63032:2018); German version EN IEC63032:2018

24,640円 (本体22,400円)


DIN EN 300674-2-2:2019

Transport and Traffic Telematics (TTT) - Dedicated Short Range Communication(DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHzto 5 815 MHz frequency band - Part 2: Harmonised Standard for access to radiospectrum - Sub-part 2: On-Board Units (OBU) (Endorsement of the English versionEN 300 674-2-2 V2.2.1 (2019-06) as a German standard)

3,828円 (本体3,480円)

DIN EN IEC 62386-220*VDE 0712-0-220:2019

Digital addressable lighting interface - Part 220: Particular requirements for controlgear - Centrally supplied emergency operation (device type 19) (IEC 62386-220:2019);German version EN IEC 62386-220:2019

13,167円 (本体11,970円)

DIN EN ISO 16757-1:2019

Data structures for electronic product catalogues for building services - Part 1:Concepts, architecture and model (ISO 16757-1:2015); German version EN ISO 16757-1:2019

28,556円 (本体25,960円)

DIN EN ISO 16757-2:2019

Data structures for electronic product catalogues for building services - Part 2:Geometry (ISO 16757-2:2016); German version EN ISO 16757-2:2019

50,094円 (本体45,540円)

-

35 情報技術．事務機械





DIN 52353:2019 Testing the abrasion resistance of automotive glazing with the windscreen wiper test 27,324円 (本体24,840円)

DIN EN 17186:2019Identification of vehicles and infrastructures compatibility - Graphical expression forconsumer information on EV power supply; German version EN 17186:2019

19,756円 (本体17,960円)

DIN EN 50436-4*VDE0406-4:2019


20,666円 (本体18,788円)

DIN VDE 0100-721*VDE0100-721:2019

Low-voltage electrical installations - Part 7-721: Requirements for special installationsor locations - Electrical installations in caravans and motor caravans (IEC 60364-7-721:2017, modified); German implementation HD 60364-7-721:2019

15,087円 (本体13,716円)


DIN EN 15152:2019 Railway applications - Windscreens for trains; German version EN 15152:2019 33,924円 (本体30,840円)


DIN EN ISO 11591:2019Small craft - Field of vision from the steering position (ISO 11591:2019); Germanversion EN ISO 11591:2019

18,018円 (本体16,380円)


DIN 5452-2:2019Aerospace series - Unmanned aircraft systems (UAS) - Part 2: Requirements forremote pilots

18,018円 (本体16,380円)

DIN EN 16602-70-60:2019

Space product assurance - Qualification and Procurement of printed circuit boards;English version EN 16602-70-60:2019, only on CD-ROM

90,134円 (本体81,940円)

DIN EN 303213-6-1:2019

Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 6:Harmonised Standard for access to radio spectrum for deployed surface movementradar sensors - Sub-part 1: X-band sensors using pulsed signals and transmittingpower up to 100 kW (Endorsement of the English version EN 303 213-6-1 V3.1.1(2019-07) as a German standard)

3,828円 (本体3,480円)

DIN EN 3155-015:2019Aerospace series - Electrical contacts used in elements of connection - Part 015:Contacts, electrical, female, type A, crimp, class S - Product standard; German andEnglish version EN 3155-015:2019

16,368円 (本体14,880円)

DIN EN 3155-078:2019Aerospace series - Electrical contacts used in elements of connection - Part 078:Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Productstandard; German and English version EN 3155-078:2019

16,368円 (本体14,880円)

DIN EN 3357:2019

Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum inductionmelted and consumable electrode remelted - Solution treated and precipitation treated- Bar for machining - a or D


DIN EN 3645-010:2019

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 ｰC or 200 ｰC continuous - Part 010: Receptacle,hermetic, round flange, jam nut mounting - Product standard; German and Englishversion EN 3645-010:2019

14,740円 (本体13,400円)

DIN EN 3645-013:2019Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 ｰC or 200 ｰC continuous - Part 013: Dummyreceptacle - Product standard; German and English version EN 3645-013:2019

14,740円 (本体13,400円)

DIN EN 4838-005:2019

Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated,rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 005: Withpolarized signal contact - Product standard; German and English version EN 4838-005:2019

18,018円 (本体16,380円)


DIN 55440-1:2019Packaging test - Determination of compression resistance - Part 1: Test with constantconveyance speed

9,768円 (本体8,880円)

DIN EN 17066-1:2019Insulated means of transport for temperature sensitive goods - Requirements andtesting - Part 1: Container; German version EN 17066-1:2019

22,968円 (本体20,880円)


DIN EN ISO 18218-2:2019

Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect method (ISO18218-2:2019); German version EN ISO 18218-2:2019

19,756円 (本体17,960円)

DIN EN ISO 1833-10:2019

Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate orpolylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019); German version EN ISO 1833-10:2019

11,374円 (本体10,340円)

DIN EN ISO 1833-12:2019

Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certainmodacrylics, certain chlorofibres, certain elastane fibres with certain other fibres(method using dimethylformamide) (ISO 1833-12:2019); German version EN ISO 1833-12:2019

14,740円 (本体13,400円)

DIN EN ISO 1833-16:2019

Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibreswith certain other fibres (method using xylene) (ISO 1833-16:2019); German versionEN ISO 1833-16:2019

13,112円 (本体11,920円)

DIN EN ISO 1833-18:2019

Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk with other proteinfibres (method using sulfuric acid) (ISO 1833-18:2019); German version EN ISO 1833-18:2019

13,112円 (本体11,920円)

DIN EN ISO 1833-21:2019

Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibres, certainmodacrylics, certain elastanes, acetates, triacetates and certain other fibres (methodusing cyclohexanone) (ISO 1833-21:2019); German version EN ISO 1833-21:2019

14,740円 (本体13,400円)

DIN EN ISO 1833-27:2019

Textiles - Quantitative chemical analysis - Part 27: Mixtures of cellulose fibres withcertain other fibres (method using aluminium sulfate) (ISO 1833-27:2018); Germanversion EN ISO 1833-27:2019

14,740円 (本体13,400円)

DIN EN ISO 1833-3:2019Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate with certainother fibres (method using acetone) (ISO 1833-3:2019); German version EN ISO 1833-3:2019

11,374円 (本体10,340円)

DIN EN ISO 23910:2019Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO23910:2019); German version EN ISO 23910:2019

13,112円 (本体11,920円)

55 包装及び物流


59 繊維及び皮革技術





DIN EN ISO 4254-9:2019Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018); Germanversion EN ISO 4254-9:2018

22,968円 (本体20,880円)

DIN ISO 15152:2019Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method (ISO 15152:2003 + Amd.1:2012 + Amd.2:2018)

18,018円 (本体16,380円)


DIN EN ISO 17678:2019Milk and milk products - Determination of milk fat purity by gas chromatographicanalysis of triglycerides (ISO 17678:2019); German version EN ISO 17678:2019

26,026円 (本体23,660円)


DIN 28140-2:2019Connections for bottom discharge valves - Part 2: On glass lined steel; connectingdimensions PN 10

9,768円 (本体8,880円)

DIN 28150:2019 Divided lapped flange for glass lined welding necks - PN 10 8,030円 (本体7,300円)

DIN EN 13697:2019

Chemical disinfectants and antiseptics - Quantitative non-porous surface test for theevaluation of bactericidal and/or fungicidal activity of chemical disinfectants used infood, industrial, domestic and institutional areas - Test method and requirementswithout mechanical action (phase 2, step 2); German version EN 13697:2015+A1:2019

26,026円 (本体23,660円)

DIN EN 14885:2019Chemical disinfectants and antiseptics - Application of European Standards forchemical disinfectants and antiseptics; German version EN 14885:2018

36,652円 (本体33,320円)

DIN EN 1650:2019

Chemical disinfectants and antiseptics - Quantitative suspension test for theevaluation of fungicidal or yeasticidal activity of chemical disinfectants and antisepticsused in food, industrial, domestic and institutional areas - Test method andrequirements (phase 2, step 1); German version EN 1650:2019

31,262円 (本体28,420円)

DIN EN 50436-4*VDE0406-4:2019


20,666円 (本体18,788円)

DIN EN IEC 60746-4:2019

Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen inwater measured by membrane-covered amperometric sensors (IEC 60746-4:2018);German version EN IEC 60746-4:2019

26,026円 (本体23,660円)


DIN 51724-1:2019 Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur 14,740円 (本体13,400円)

DIN EN 15940:2019Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment -Requirements and test methods; German version EN 15940:2016+A1:2018+AC:2019

22,968円 (本体20,880円)

65 農業


67 食品技術


71 化学技術


75 石油及び関連技術




DIN EN ISO 10418:2019Petroleum and natural gas industries - Offshore production installations - Processsafety systems (ISO 10418:2019); English version EN ISO 10418:2019

22,968円 (本体20,880円)

DIN EN ISO 19900:2019Petroleum and natural gas industries - General requirements for offshore structures(ISO 19900:2019); English version EN ISO 19900:2019

41,954円 (本体38,140円)

DIN EN ISO 19904-1:2019

Petroleum and natural gas industries - Floating offshore structures - Part 1: Ship-shaped, semi-submersible, spar and shallow-draught cylindrical structures (ISO 19904-1:2019); English version EN ISO 19904-1:2019, only on CD-ROM

85,074円 (本体77,340円)


DIN EN 10025-2:2019Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels; German version EN 10025-2:2019

27,324円 (本体24,840円)

DIN EN 10025-3:2019Hot rolled products of structural steels - Part 3: Technical delivery conditions fornormalized/normalized rolled weldable fine grain structural steels; German version EN10025-3:2019

22,968円 (本体20,880円)

DIN EN 10025-4:2019Hot rolled products of structural steels - Part 4: Technical delivery conditions forthermomechanical rolled weldable fine grain structural steels; German version EN10025-4:2019

22,968円 (本体20,880円)

DIN EN 10025-5:2019Hot rolled products of structural steels - Part 5: Technical delivery conditions forstructural steels with improved atmospheric corrosion resistance; German version EN10025-5:2019

24,640円 (本体22,400円)

DIN EN 10025-6:2019Hot rolled products of structural steels - Part 6: Technical delivery conditions for flatproducts of high yield strength structural steels in the quenched and temperedcondition; German version EN 10025-6:2019

22,968円 (本体20,880円)

DIN EN 10136:2019Steels and cast irons - Determination of nickel content - Flame atomic absorptionspectrometric method (FAAS); German version EN 10136:2019

16,368円 (本体14,880円)

DIN EN 10177:2019Steels - Determination of calcium content - Flame atomic absorption spectrometricmethod (FAAS); German version EN 10177:2019

16,368円 (本体14,880円)

DIN EN 10181:2019Steels - Determination of lead content - Flame atomic absorption spectrometricmethod (FAAS); German version EN 10181:2019

14,740円 (本体13,400円)

DIN EN 507:2019Roofing and cladding products from metal sheet - Specification for fully supportedproducts of aluminium sheet; German version EN 507:2019

14,740円 (本体13,400円)

DIN EN 573-3:2019Aluminium and aluminium alloys - Chemical composition and form of wrought products- Part 3: Chemical composition and form of products; German version EN 573-3:2019

26,026円 (本体23,660円)

DIN EN ISO 945-1:2019Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO945-1:2019); German version EN ISO 945-1:2019

26,026円 (本体23,660円)


DIN EN 14081-1:2019Timber structures - Strength graded structural timber with rectangular cross section -Part 1: General requirements; German version EN 14081-1:2016+A1:2019

27,324円 (本体24,840円)

77 金属工学


79 木材工業




DIN EN ISO 19085-10:2019

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO19085-10:2018); German version EN ISO 19085-10:2019

29,964円 (本体27,240円)

DIN EN ISO 19085-7:2019

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combinedsurface/thickness planing machines (ISO 19085-7:2019); German version EN ISO19085-7:2019

33,924円 (本体30,840円)


DIN EN ISO 10123:2019Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013); German version EN ISO 10123:2019

14,740円 (本体13,400円)

DIN EN ISO 11343:2019Adhesives - Determination of dynamic resistance to cleavage of high-strengthadhesive bonds under impact wedge conditions - Wedge impact method (ISO11343:2019); German version EN ISO 11343:2019

18,018円 (本体16,380円)

DIN EN ISO 13468-1:2019

Plastics - Determination of the total luminous transmittance of transparent materials -Part 1: Single-beam instrument (ISO 13468-1:2019); German version EN ISO 13468-1:2019

18,018円 (本体16,380円)


DIN EN ISO 1518-1:2019Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loadingmethod (ISO 1518-1:2019); German version EN ISO 1518-1:2019

18,018円 (本体16,380円)

DIN EN ISO 1518-2:2019Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loadingmethod (ISO 1518-2:2019); German version EN ISO 1518-2:2019

16,368円 (本体14,880円)

DIN EN ISO 9514:2019Paints and varnishes - Determination of the pot life of multicomponent coatingsystems - Preparation and conditioning of samples and guidelines for testing (ISO9514:2019); German version EN ISO 9514:2019

14,740円 (本体13,400円)


DIN EN 12390-15:2019Testing hardened concrete - Part 15: Adiabatic method for the determination of heatreleased by concrete during its hardening process; German version EN 12390-15:2019

18,018円 (本体16,380円)

DIN EN 12390-2:2019Testing hardened concrete - Part 2: Making and curing specimens for strength tests;German version EN 12390-2:2019

13,112円 (本体11,920円)

DIN EN 12390-3:2019Testing hardened concrete - Part 3: Compressive strength of test specimens; Germanversion EN 12390-3:2019

19,756円 (本体17,960円)

DIN EN 12390-5:2019Testing hardened concrete - Part 5: Flexural strength of test specimens; Germanversion EN 12390-5:2019

14,740円 (本体13,400円)

DIN EN 12390-7:2019Testing hardened concrete - Part 7: Density of hardened concrete; German version EN12390-7:2019

14,740円 (本体13,400円)

DIN EN 12390-8:2019Testing hardened concrete - Part 8: Depth of penetration of water under pressure;German version EN 12390-8:2019

11,374円 (本体10,340円)

83 ゴム及びプラスチック工業


87 塗料及び色材工業


91 建設材料及び建築物




DIN EN 15269-1:2019Extended application of test results for fire resistance and/or smoke control for door,shutter and openable window assemblies, including their elements of building hardware- Part 1: General requirements; German version EN 15269-1:2019

18,018円 (本体16,380円)

DIN EN 1993-1-5:2019Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements;German version EN 1993-1-5:2006 + AC:2009 + A1:2017 + A2:2019

36,652円 (本体33,320円)

DIN EN 507:2019Roofing and cladding products from metal sheet - Specification for fully supportedproducts of aluminium sheet; German version EN 507:2019

14,740円 (本体13,400円)

DIN EN 508-2:2019Roofing and cladding products from metal sheet - Specification for self-supportingproducts of steel, aluminium or stainless steel sheet - Part 2: Aluminium; Germanversion EN 508-2:2019

27,324円 (本体24,840円)

DIN EN 60335-2-95*VDE 0700-95:2019

Household and similar electrical appliances - Safety - Part 2-95: Particularrequirements for drives for vertically moving garage doors for residential use (IEC60335-2-95:2011, modified + A1:2015 + A2:2017); German version EN 60335-2-95:2015 + A1:2015 + A2:2019

16,295円 (本体14,814円)

DIN EN ISO 16535:2019Thermal insulating products for building applications - Determination of long-termwater absorption by immersion (ISO 16535:2019); German version EN ISO 16535:2019

18,018円 (本体16,380円)

DIN EN ISO 16757-1:2019

Data structures for electronic product catalogues for building services - Part 1:Concepts, architecture and model (ISO 16757-1:2015); German version EN ISO 16757-1:2019

28,556円 (本体25,960円)

DIN EN ISO 16757-2:2019

Data structures for electronic product catalogues for building services - Part 2:Geometry (ISO 16757-2:2016); German version EN ISO 16757-2:2019

50,094円 (本体45,540円)

DIN VDE 0100-420*VDE0100-420:2019

Low voltage electrical installations - Part 4-42: Protection for safety - Protectionagainst thermal effects (IEC 60364-4-42:2010, modified + A1:2014); Germanimplementation HD 60364-4-42:2011 + A1:2015

17,501円 (本体15,910円)


DIN EN 12697-2:2019Bituminous mixtures - Test methods - Part 2: Determination of particle sizedistribution; German version EN 12697-2:2015+A1:2019

11,374円 (本体10,340円)

DIN EN 12697-33:2019Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor;German version EN 12697-33:2019

19,756円 (本体17,960円)

DIN EN 12767:2019Passive safety of support structures for road equipment - Requirements and testmethods; German version EN 12767:2019

37,840円 (本体34,400円)

DIN EN 15885:2019Classification and characteristics of techniques for renovation, repair and replacementof drains and sewers; German version EN 15885:2018

32,692円 (本体29,720円)


DIN EN 14619:2019Roller sports equipment - Kick scooters - Safety requirements and test methods;German version EN 14619:2019

21,318円 (本体19,380円)

DIN EN 17214:2019 Visual assessment of furniture surfaces; German version EN 17214:2019 22,968円 (本体20,880円)

97 家庭用及び商業用装置．娯楽．スポーツ


93 土木工学




DIN EN 17229:2019Fitness centres - Requirements for centre amenities and operation - Operational andmanagerial requirements; German version EN 17229:2019

19,756円 (本体17,960円)

DIN EN 893:2019Mountaineering equipment - Crampons - Safety requirements and test methods;German version EN 893:2019

21,318円 (本体19,380円)

DIN EN IEC 60730-2-14*VDE 0631-2-14:2019

Automatic electrical controls - Part 2-14: Particular requirements for electricactuators (IEC 60730-2-14:2017); German version EN IEC 60730-2-14:2019

12,368円 (本体11,244円)


注文書年月日

【お申込み先】ご記入の上、ＦＡＸにてお申込みください。 ※有料会員の方は、JSA Webdesk（https://webdesk.jsa.or.jp/）からお申込みください。

日本規格協会グループ販売ｻｰﾋﾞｽﾁｰﾑ FAX ：03-4231-8665 /TEL：03-4231-8550

（ふりがな）【貴社名】【ご住所】（〒－）都・道府・県

【ご担当部署名】

【TEL】（日中連絡の取れる番号）

（ふりがな）【ご担当者名】

【FAX】

お支払い方法請求書を商品に同封・振込

（振込手数料はお客様ご負担にてお願いいたします。）

お支払い期限

請求書記載の日付から 60日以内に

お振込みください。

JSA-ID（不明の場合は空欄で結構です）

言語※1 規格番号若しくは書籍タイトル（ISBNコード）年号※2 部数金額

【通信欄】

(2019-09)

※1 言語の欄にご指定がない場合は原則として原文（ＪＩＳは和文、海外規格は英語等）を納品いたします。

※2 旧版、廃止規格をご希望の場合はその旨ご記入下さい。（ご指定のない場合は原則として最新版を納品いたします。）

※3 商品の返品・交換は、乱丁、落丁がある場合を除き、原則お受けできませんので予めご了承下さい。

※4 送付手数料は、ご注文の部数にかかわらず、１回のご注文につき一律463円(税抜)申受けます。

ただし、ご予約対象商品につきましては、発送毎に送料を申受けます。

(送付手数料は変更になる場合がございます。時間指定、航空便等の特別なご指定がある場合は、実費の送付手数料をご請求いたします。)

※5 PDF版のご購入は、JSA Webdesk (https://webdesk.jsa.or.jp)をご利用下さい。（PDF版のお取扱いがない商品もございます。）

※6 ご記入いただいた個人情報に基づき、日本規格協会グループから各種ご案内を送付させていただく場合がございます。詳細は個人情報

保護方針（https://www.jsa.or.jp/other/privacy/）をご覧ください。

※7 規格類は価格が変更される場合がございます。
https://webdesk.jsa.or.jp/https://www.jsa.or.jp/other/privacy/

Documents

DIN規格 --- 2019-10月 新刊情報20607:2019); German version EN ISO 20607:2019 27,324円(本体24,840円) DIN EN ISO 4869-1:2019 Acoustics - Hearing protectors - Part 1: Subjective

DIN規格 --- 2019-10月新刊情報20607:2019); German version EN ISO 20607:2019 27,324円(本体24,840円) DIN EN ISO 4869-1:2019 Acoustics - Hearing protectors - Part 1: Subjective