Embed Size (px)
Citation preview
D-CAD Engineers & Consultants
Job Oriented - Hands on Internship course Program
( Jointly announced by DCAD Coimbatore & ECI New Delhi)
Copy Right and Proprietary
7/53, Nehru Street, Ramnagar, Coimbatore. Ph:9597218561
www.dcadengineers.com , [email protected], [email protected]
*** Certificate Course Accreditation by Engineering Council of India***
Real Time case Studies Explanation
Relevant codes and Software are taught
Course Features Work experience for UG/PG graduates while studying
Internship and project for curriculum
ECI Membership ( Membership fee included )
******* Placement / Job after Course completion *******
******* Flexible timing for practicing engineers / working professionals *******
COURSE CODE: ECI/INTERNSHIP/2021/1_1
JOB ROLE : STRUCTURAL ENGINEER
Learning Objectives
• To Impart with a comprehensive basic knowledge of structural analysis and design of buildings and industrial structures.
• To understand the behavior of structural systems and elements through lecture material, complemented by real time problems.
• To provide insight knowledge of structures carry loads, Analysis methods, Computer Modelling of structures and design process.
• To Inculcate real experience through a series of design problems and case studies.
• To provide expose to structural design of steel and concrete as per codes and standards ( Indian and International standards).
Real time Engineering drawing Reading & Interpretations: Symbols, Architectural / Mechanical / Structural / fabrication / shop drawings.
Load Calculations: Dead load / Live load / Wind load / Seismic load / Earth pressure / Fluid pressure / surge loads, Crane loads.
Mechanics: Necessary Concepts & application of Engineering Mechanics / Strength of materials / Soil Mechanics / Fluid Mechanics.
Analysis methods: Assumptions in Analysis, Elastic analysis, Plastic analysis.
Concrete Structural Elements design: Design Philosophies of Columns, beams, Slab & Footings.
Steel Structural Elements design: Design Philosophies of Compression / Tension /Bending members.
Module 1: Engineering basics and Mechanics Duration: 35 Hrs Credits: 35 Fee : ₹ 25000
Duration: 6 Months Class Room : 3 months (105hrs) Real time practice Onsite ( internship): 3 months (90hrs)
Fees : ₹ 60000 + Taxes **Limited seat only ** CPD Credits: 90points
Computation using Excel : Computation tools – Formulae – conditional formatting – Preparation of design Spreadsheets & Graph Plotting.
Computer Modelling for analysis : Modelling of _ 2D & 3DFramed structures – Connections – Supports – Loads - Check lists.
Analysis methods: Assumptions in Analysis, Elastic analysis, Plastic analysis and Finite Element Analysis
Module 2: Analysis Tools Duration: 15 Hrs Credits: 15 Fee : ₹ 10000
Wind Load Calculations as per IS 875, EC1,ASCE 7, NBCC, AS 1170
Seismic Load Calculations as per IS1893, EC8,ASCE7
Concrete Design : Column, beam, slab, walls, footings as per IS456, EC2, ACI, CSA A23.3, AS3600
Steel Design : Column, beam , Gratings, Baseplate : IS800, EC3, AISC, CSA-S16, AS4100
Module 3: Codes & Standards Duration: 25 Hrs Credits: 25 Fee : ₹ 15000
Steel Connection design : Shear & Moment Connections ( Column – beam , Beam-Beam, Column splices, Beam splices).
Steel Girder design : Gantry & Plate Girder beam design
Pile foundation design : Vertical Load Capacity – Lateral load capacity – Group Efficiency – Stiffness ( Spring Constants) calculation.
Structural Strength Assessment & Rehabilitation : Overview of NDT Methods – Process and Check lists of assessment.
Design philosophy of Dynamic analysis : Free Vibration ( Natural Frequency & Mode shapes) & Forced Vibration ( Response & Amplitudes)
Module 4: Special topics Duration: 15 Hrs Credits: 15 Fee : ₹ 15000
Concrete Detailing :
Detailing of Footings – Column – beam – Slab – walls – Staircase - Water tanks - Pilecap etc., Ductile detailing
Steel Detailing :
Detailing of Column – beam – Staircase - connections ( Column – beam , Beam-Beam, Column splices, Beam splices) , Cap plate,
Base plate, Anchor bolts etc.,
Module 5: Structural Detailing Duration: 15 Hrs Credits: 15 Fee : ₹ 10000
NOTE: 1. Participants can Register for any one of the module and corresponding duration & Fee are applicable, as mentioned.
2. Participants can Register for all modules and the total duration is 105 Hrs & fees INR: ₹ 60000.
3. Individual modules(2 to 5) can be opted however the module 1 is essential & mandatory.
For Registration : Contact - 1. D-CAD Engineers & Consultants(www.dcadengineers.com): +91 9597218561 (Mr.Shakivel Palani)
2. Engineering Council of India (www.ecindia.org) : +91 9313190011 (Shri . B.R.Jain )
D-CAD Engineers & Consultants, Coimbatore ( an Associate of D-CAD Technologies, New Delhi founded by Dr.K.G.Bhatia) is headed by Er.Shakivel Palani to provide Engineering services, Testing, Training program and Internship in the field of Civil and Structural Engineering(Static & Dynamics).
7/53, Nehru Street, Ramnagar, Coimbatore. Ph:9597218561 www.dcadengineers.com , [email protected], [email protected]
Er. Shakivel Palani M.Tech (IIT M), P.E(ECI)
Professional Engineer (P.E/000015/17) – Engineering. Council of India Member, Bureau of Indian Standards - CED 43 Foundations subjected to
Dynamic Loads (IS 2974) Member, Heritage Screening Committee, Hindu Religious & Charitable
Endowments department, Tirunelveli zone, Tamilnadu
Director - Technical,
Education : B.E (Civil Engg.) from PSG College of Technology, Coimbatore and M.Tech in Ocean Engg (Structures) from IIT Madras. Experience: 20+ Yrs in Industry & 6Yrs in academics - Analysis & Design as per Indian & International codes/Standards and NDT Methods Industry Exposure: Buildings, Cement plant & power plant structures, Oil & Gas structural systems, Structural Dynamics, Machine Foundation Services : MNCs (Mott Macdonald-UK, FLSmidth-Denmark, Bechtel-US etc..) consultancy & EPC companies. Current position: Director, D-CAD Coimbatore office & visiting faculty to Engineering colleges and Core Engineering training program.
Staffing Services For Engineering Service , EPC and Consultancy Industry For Engineering Software development companies
Skill Assessment - Competency Mapping - Mock Interview
Subject Skill - Personal Skill - Engineering Skills
Flagship training programs for students Job Oriented Program for Civil & Structural Engineers Engineering software : STAADPro, ANSYS, ETABS, NISA, AUTOCAD
D-CAD Engineers & Consultants Development Centre for Applied Dynamics
(An Associate Company of D-CAD Technologies, New Delhi)
Engineering Consultancy Testing Training Skill Assessment Troubleshooting
Formerly:
General Manager - Bharat Heavy Electrical Ltd. (BHEL) President - ISET (Indian Society of Earthquake Technology) Member – International Society of Soil Mechanics & Foundation Engineering. Member – Indian Society of Wind Engineering. Member – SERC-CSIR, DST(Committee on Noise and Vibration) Member - Bureau of Indian Standards (BIS) Committees
• CED 39 : Earthquake Engineering (IS 1893 Part 1) • CED 39-6 : Industrial Structures(Convener IS 1893 Part 4) • CED 37 : Structural Safety of Buildings (IS 875) • CED 43 : Foundations subjected to Dynamic Loads (Convener –
Panel for revision of IS2974 Part 1 to 5) • MED 28 : Mechanical Vibration and Shock.
Dr K G Bhatia, B.Sc. Engg., ME, PhD FIE, FISET, FIASE, MISWE, MICI Senior Professional Engineer(ECI) Chartered Engineer (IE-India); Honorary Engineer (IISEE-Japan) CEO, D-CAD Technologies, New Delhi. www.dcadtechnologies.com
Advisor
Dr. K G Bhatia is a well known research scientist in the field of Structural Dynamics, and an expert in Machine Foundation Design, Vibration analysis and Isolation, Dynamic Loading ( Wind , Blast & Impact), Seismic Qualification, Failure Analysis and Weight Optimization. He has about 50 Years of industry experience in dynamic analysis and Machine foundation design.
D-CAD Services and Specializations Consultation - Testing - Training : Structural Analysis ( Statics & Dynamics) & Strength Design
Specializations Machine foundation
( Rotary / Reciprocating/Impact Machines)
• Frame Foundation
• Block Foundation
• Vibration Isolation
• Vibration Troubleshooting
• Capacity up-gradation
Structural Dynamics • Earthquake Resistant Design
o Buildings
o Industrial Structures
o Treatment Plants
• Design _ Wind & Blast
o Plant Structures
o Equipment & Piping
• Seismic Qualifications
o Plant Structures
o Equipment & Piping
o Machines
NDT • Structural Health Assessment
• Rehabilitation & Strengthening
• Seismic Evaluation & Retrofitting
