CV - Søren Drivsholm

  • Published on
    08-Aug-2015

  • View
    54

  • Download
    3

Transcript

<ol><li> 1. 1/3 Curriculum Vitae Sren Drivsholm Sren Drivsholm Friheim 10 4047 Hafrsfjord, Norway Mobile: +47 401 01 482 Email: soren.drivsholm@drivsholm.no Born: 7th October 1978 SUMMARY Senior Mechanical Engineer with specialty in multi discipline project management on Greenfield and Brownfield projects for production platforms and mobile offshore drilling units. I have consulted for HESS, ConocoPhillips, Statoil, North Atlantic Drilling and GDF Suez E&amp;P with EPCM / EPCIC projects. My work have involved multi discipline project management, surveys, process design, specification of equipment and systems, plant layout, facility risk analysis, engineering, planning, procurement, organize and follow-up assigned work to suppliers, supplier single point of contact, cost estimating (CTR), budget control, change and interface management. Construction, installation and overhaul follow-up at fabrication sites and yards, ensure suppliers complies with governing HSE regulations, factory acceptance test, mechanical completion, commissioning, final documentation, handover to operation, technical and general support to Operation. Managing a MODU drilling package class renewal (SPS) and associated inspections, overhauls, OEM interface, DNV interface and re-certification. Plan to continue working with engineering and operational related challenges and management across cultural differences in multi-discipline and international environments. In long term, working with line management and operational challenges. For me, the obvious company to work for is a company with the vision to be among the market leaders within their area of business and in a job with opportunity for professional development. I am highly mobile and flexible in regards to traveling and expatriate work. EDUCATION Jan. - May 2014 Well Engineering (Brnnteknikk VG2) Offshoreutdanning.no, Stavanger 2008 2010 Graduate Certificate in Business Administration (HD part 1) University of Southern Denmark, Esbjerg 2004 - 2008 B.Sc. in Mechanical Engineering, Engineering Product Design Engineering College of Aarhus, Denmark 1996 2000 Apprenticeship as Industrial Engineer (machinist/mechanic) Maskinfabrikken ANK, Aarhus, Denmark / Aarhus Technical College, Denmark PROFESSIONAL POSITIONS Jan. 2015 - present Senior Project Engineer Modifications Coordination and follow up of studies and modification activities GDF Suez E&amp;P, Stavanger, Norway Dec. 2011 Jan. 2015 Senior Project Engineer / Package Owner Technical &amp; budget responsible for MODU modification &amp; class renewal projects North Atlantic Drilling, Stavanger, Norway Oct. 2011 Dec. 2011 Interface &amp; Change Coordinator sgard Subsea Compression Project Statoil, Oslo, Norway April 2011 - Oct. 2011 Senior Mechanical Engineer / Package Responsible Engineer Technical responsibility for multi discipline equipment packages Aker Solutions Engineering &amp; Technology, Oslo, Norway 2008 2011 Project Engineer / Project Manager Technical responsibility for multi discipline equipment packages Ramboll Oil &amp; Gas, Esbjerg, Denmark 2000 - 2008 Mechanical Service Engineer for offset presses Jysk Grafisk Service, Aarhus, Denmark 1996 - 2000 Apprenticeship as Industrial Engineer (machinist / mechanic) Maskinfabrikken ANK, Aarhus, Denmark / Aarhus Technical College, Denmark </li><li> 2. 2/3 PROJECT AND MODU CLASS RENEWAL EXPERIENCE GDF SUEZ E&amp;P January 2015 present. Senior Project Engineer - Modifications. Coordination and follow up of studies and EPCIC modification activities for the semi-submersible production platform Gja. Establish and implement project systems and procedures for effective follow up of modification activities. NORTH ATLANTIC DRILLING December 2011 January 2015. Senior Project Engineer / Package Owner. Multi discipline project management, technical and budget responsibility for MODU modification and class renewal projects including general support to operation. Main projects: Managing a 15th year MODU double RAM Rig drilling package Class Renewal and overhaul (SPS) and associated inspections, overhauls, OEM interface, DNV interface and re-certification. Engineering, interface and installation of a new Oil Based Mud Cuttings handling system. New Tubular Feeding Machines, SWL 20 &amp; 35T. Overhaul of Riser Tension Units and system. Replacing and overhaul of RAM Rig Cylinders. New Iron Roughneck &amp; Doper. New logistic system to Galley and Engine Rooms. Miscellaneous piping projects and studies. Miscellaneous mechanical modifications projects and studies. STATOIL October 2011 December 2011. Interface &amp; Change Coordinator for sgard Subsea Compression Project. Multi discipline interface, change and de-conflict management internal and towards suppliers. AKER SOLUTIONS ENGINEERING &amp; TECHNOLOGY April 2011 October 2011. Senior Mechanical Engineer / Package Responsible Engineer for multi discipline equipment packages on EPC contract for the topside of production platform Eldfisk 2/7S. Overall technical responsibility of equipment packages and coordinating the work from all disciplines from specification, bid evaluation, procurement, design verification, engineering, follow-up at suppliers during construction, installation at yard and commissioning. Client: ConocoPhillips. Main projects: Mud Process System &amp; the Cutting Re-injection High Pressure Pump (CRI); Complete facility for re- injection of liquid waste from drilling operations and drain systems. SIMOPS system; Skidding system for handling of well intervention equipment. Personnel and Goods Lifts; Counter weight based wire traction type lifts. RAMBOLL OIL &amp; GAS August 2008 April 2011. Working primarily for HESS with Brownfield EPCM projects for the South Arne production platform (SA). My work involved multi discipline project management, survey, specification, procurement, engineering, documentation, maintenance procedures, supplier follow-up and support to the on- and offshore construction teams. 2010-2011: Project Manager Main projects: Deluge modifications in SA process plant and re-construction of PFP and isolation on process vessels. Miscellaneous chemical injection packages. Modification of helideck firefighting &amp; deluge system. SA DNV ASTF, Annual Survey Topside Facilities, follow-up on all engineering related punch items and contact person to Certifying Agency (DNV). South Arne RMR Projects, DNV register for Repair, Modifications &amp; Replacements, follow- up of ongoing RMR projects and contact person to Certifying Agency. Client representative on board ROV inspection vessel, annual subsea inspection of SA structure and off-loading system. Replacement of corroded High Pressure Flare Line. Establish water and chemical drain from all decks on jack-up accommodation rig HAVEN L205. Part of editorial team for Ramboll Oil &amp; Gas Project Execution Manual (LEAN). 2008-2010: Project Engineer - Piping &amp; Mechanical Implementing CAA-DK (SLV) rules and regulations for offshore helidecks on SA, SIRI, NINNI and CECILIE. Study and modification job for SA Sulphate Removal Plant &amp; Dual Media Filters improvement. Concept Study Phase 2, New Flare III on Kalundborg Refinery, Statoil. LANGUAGES Danish, native proficiency. English, full professional proficiency. Norwegian, full professional proficiency. CIVIL STATUS I live together with Julie Jonstrup, age 31, in our home in Stavanger. Julie is a graduate Petroleum Geologist. We have no children and have no plans for children the next 4 years. Therefore, I am highly mobile and flexible in regards to traveling and expatriate work. LEISURE INTERESTS Mountain biking, running, climbing and everything else involving mountains and snow. </li><li> 3. 3/3 TERTIARY EDUCATION Well Engineering (Brnnteknikk VG2) Offshoreutdanning, Stavanger. January - May 2014. Modules: Drilling Technology. Well Control. Wellbore Fluid. Production. Geology. Health, Safety &amp; Environment. Graduate Certificate in Business Administration (HD part 1) University of Southern Denmark, Esbjerg. 2008 2010. Modules: Business Economics. Data Analysis. Business Law. Economics. Research Methods. International Economics &amp; Business. Negotiation. Organization &amp; Management. Project: Market Challenges for Ramboll Oil &amp; Gas Project Management course Ramboll Denmark Academy, Denmark. February - July 2009. Modules: Project Management &amp; Cooperation. Project Planning Tools. Project Economics, Law &amp; Quality Management. Sales &amp; Project Communication. Personal Leadership. B.Sc. in Mechanical Engineering Engineering College of Aarhus, Denmark. 2004 2008. In co-operation with Ramboll Oil &amp; Gas. Examination of dynamic coefficients and finite element analysis to increase lifting capacity on offshore cranes for offshore production platforms and drilling rigs. PROFESSIONAL EXPERIENCE Mechanical Service Engineer for sheet fed offset presses Jysk Grafisk Service, Aarhus, Denmark. 2000 2008. My job had focus on trouble shooting, repairs, servicing, installation, dismounting and refurbishment of Komori offset presses at clients in Denmark, Norway and Sweden. In this job, I developed profound independency and planning skills. My job included coordination between colleagues, locally hired technicians, equipment suppliers and client managers to keep a job effective and on schedule. My job also included: Electrolysis repairs of cylinders on sheet fed and heatset presses. Refurbishment of dry running pressure/vacuum pumps. Several courses at Komori Europes HQ in Utrecht, Netherlands. Basic courses in electronics and PLC. Aarhus Technical College and Vitus Bering, Horsens, Denmark. APPRENTIANCESHIP TRAINING Apprenticeship as Industrial Engineer (machinist/mechanic) Maskinfabrikken ANK, Aarhus, Denmark / Aarhus Technical College, Denmark. 1996 2000. My job/education had focus on the use of lathes, milling and welding to produce prototypes ordered by engineers, industrial designers and architects. In addition, fast track manufacturing and repairs of damaged spare parts from all kinds of machinery and industries, from biomedical, food, wood, tobacco, and graphic industries to contractors and container cranes. An apprenticeship giving a broad insight into a variety of industries and a very committing approach to producing high quality work. The 4-year apprenticeship where completed with a practical and theoretical exam at Aarhus Technical College. SAFETY, TECHNICAL AND MANAGEMENT TRAINING Offshore Health Certificate, valid through 09/2016 Offshore Basic Safety Training incl. HUET, valid through 08/2016 Marine Offshore Unit Superintendent Course (DNV-GL), May 2014 Advanced Well Control, 2014 Lubrication Fluids Management, 2014 Leadership Training: Conflict Management, 2014 Leadership Training: Business Performance Process, 2013 Leadership Training: ABCs of Behaviour, 2013 Leadership Training: What is Leadership, 2013 Barrier Management, 2013 Asset Management System, 2013 Hazard Recognition &amp; Work Permits, 2013 Lifting Operations, 2013 Drilling Technology, 2011 The 7 Habits of Highly Effective People, 2010 Out of the Box Thinking, 2009 LEAN course for Project Managers, 2009 Project Management course, Ramboll Denmark Academy, Feb. June 2009 Mechanical equipment on offshore installations, 2009 Valves in the Oil &amp; Gas Industry, 2009 Processing and Process Facilities for Oil &amp; Gas, 2008 PED 97/23/EC - Pressure Equipment Directive, 2008 PDS Plant Design Solution - Piping and Mechanical design, 2008 </li></ol>