CURRICULUM VITAESECTION A - PERSONAL DETAILS

SECTION B - QUALIFICATION

Having more than 5 years experience in the areas of Instrument Engineering and Design, and Project Management in Oil and Gas Industries. Well knowledge and familiar with instrumentation & control system technology, such as DCS, PLC, SCADA, Instrument Field Device, etc at Onshore, Offshore (Wellhead Platform) and FPSO. Managed and worked on a diverse range of instrument engineering and design, construction, installation, Pre & commissioning and start-up, supply chain management, international code and standard implementation such as API, ISA, IEC, DEP SHEEL Standart with all of it’s aspects to oil and gas facility, production and operation.

Field Instruments Experienced in Field Instruments for Installation, Maintenance, Troubleshooting, Calibration and Configuration for field instruments: - Transmitter (Flow, Level, Temperature, Pressure), Recorder, Converter, Indicator,

Limit Switch, Manifold, flange, and various of Final Control Elements (Control Valves, Shutdown, Blow Down, actuator, positioner, Solenoid Valve and other supporting parts)

- Process Analyzer: Gas Chromatograph, Moisture, Hydrocarbon Dewpoint, Conductivity, pH, O2/NH3/CO analyzer.

- Fire & Gas Systems Detectors: Gas Detector, Open Path, Heat, Flame, Smoke, High Sensitive Smoke Detector (HSSD), Fusible Loops, Fire Water Deluge System, Fire and Smoke Damper.

- Instrument/Package Communication: Foundation FieldBus-H1/H2, Serial ModBus and HART.

- Field Instrument Tools: Emerson-375/475, Yokogawa (BT) 200. - Instrument Calibration at Site & Laboratory base on ISO 17025. - Instrument Management & Calculation Software: InstruCalc & INTools. - Inspection & Installation in Hazardous Area.

Process Control System - Distributed Control System (DCS): ABB Industrial AC 450 - Quality Control System (QCS) : ABB Industrial AC 450- PLC: Allen Bradley RSLogix5000; Siemens S5 & S7

T elecom : - Wireline System ( Fiber Optic, LAN, PA/GA, CCTV, PABX/Telephone System ).

Muhammad Husni Curriculum Vitae Page 1 of 5

Name : MUHAMMAD HUSNIPosition : Instrument Engineer/ InspectorDate of Birth : Tulungagung, 09 December 1985Marital Status : Married Nationality : IndonesianAddress : Perumahan Taman Melati Sawangan Blok FA no 19, Depok, Jawa Barat Mobile Phone : +628563053092/+6281210659814 Email : husnibinlatief@gmail.comEducation : Bachelor Degree, Engineering Physic

- Tenth of November Institute of Technology

- Wireless System (VSAT, INMARSAT, Global Maritime Distress and Safety System (GMDSS), VHF & UHF Radio, and Meteorological System.

-

Engineering Design Control System Architecture, Instrument & Control Philosophy, P&ID, Operational Test Procedure (OTP), Standard Operation Procedure (SOP), Technical Dossiers, Process Flow Diagram, Instrument Sizing/Calculation, Data Sheet, Inspection Test Record (ITR), Material Receive Inspection (MRI), Management of Change (MOC), Instrument Loop Diagram, Instrument Hookups, Instrument JB/Marshaling termination & Schedule, Internal Panel Wiring diagram, Logic Diagram, Safe Chart and Cause & Effect Matrix.

System Packages HV Switchgear, LV Switchgear, Gas Turbine Generator, Gas Turbine Compressor, Emergency Diesel Generator, Well Head Control Panel & HPU, Steam Turbine Generator, Flare System, Air Compressor, Gas Metering System, HVAC, Fire Water & Deluge System, SCADA, and Marine Telecommunication System.

SECTION C – PROFESSIONAL & TRAINING

(2013) Belden Signal Transmission Technology Seminar(2012) Reability & Safety of Tube & Accessories, By Parker (2011) PLC Siemens S7, By APP SInarmas (2010) DCS ABB , By ABB Indonesia

SECTION D – ENGINEERING SOFTWARE LITERACY

InstruCalc 5.1 & 7.1.0; Microsoft Office; MASTER FLO; AGA3 Software; Real Flow; AutoCAD; PLC Software (Siemens, Allen Bradley); Microsoft Visio Professional, etc.

SECTION E – EMPLOYMENT HISTORY

Oct 2015-Now Amec Foster Wheeler Asia Pacific PTE LTD (Contract By ACES-GQS Asia Pasific Corp)April 2013 – August 2015 PT. Singgar MuliaAugust 2011 – April 2013 PT. Indokomas Buana Perkasa (CEGELEC)December 2009 – August 2011 PT. Pindo Deli Pulp & Paper Sinarmas Karawang

SECTION F – EMPLOYMENT RECORD

1. AMEC FOSTER WHEELER ITALIANA (Contract By ACES-GQS Asia Pacific Corp)

Position : E&I Inspector/ExpeditorIndustry : Engineering, Procurement, Construction Oil & Gas CompanyDate Joined : October 2015Project : Exxon Mobile JURONG COGEN Refinery Project, SINGAPOREResponsibilities :

Review Engineering Progress Report Document Vendor Review Material Progress Report Status Vendor Review Fabrication/Manufacturing Progress Report Vendor

on Field Review QC and Fabrication Procedure

Muhammad Husni Curriculum Vitae Page 2 of 5

Inspect Material Vendor Inspect Fabrication/Manufacturing Material Inspect Material Routine Test FAT

2. PT. SINGGAR MULIA

Position : Instrument and Telecom EngineerIndustry : Oil & Gas Engineering, Consultant CompanyDate Joined : April 2013 – July 2015Responsibilities :

Performing preliminary engineering to develop P&ID, Instrument Calculation, hook up drawings, logic & schematic drawings, detail construction drawings, location plan, cable lay out, cable schedule, Instrument termination, and material take off.

Review, comments, and approved vendor drawings for instrumentation & control equipment and submit appropriate recommendation to the clients.

Support project engineers to finalized manhour estimation, Scope of work, Master Deliverables Register (MDR), Instrument Document completion, Site observation, and target project completion as necessary.

Generate instrument philosophy, Instrument & Control Design Basis, Control Logic Narrative, Instrument/Cable schedule, instrument specification, Instrument datasheet, Instrument calculation, Instrument list, instrument management activity as per project requirement.

Participate in HAZOP & HAZID activity as per project requirements.

Project :(1) EPCI -1 : PHE – 12, PHE – 24 AND CPP2 Platform and Pipeline project, Client PT.

PERTAMINA PHE WMO

(2) FEED Engineering of Ande Ande Lumut Project, FLOATING PRODUCTION STORAGE AND OFFLOADING (FPSO), Client SANTOS Pty Ltd

(3) FEED Engineering of Tegal Pancing Project, Client PT.PERTAMINA EP

(4) FEED Engineering of Jimbaran Tiung Biru Gas Project, Client PT.PERTAMINA EP

(5) EJ-EA & ECOM-FPRO Pipeline Project, Client PT.PERTAMINA PHE ONWJ

(6) OO-OC-OX Development Project, Client PT.PERTAMINA PHE ONWJ

(7) E/I Inpector of Peluang Development Project for SANTOS (West Madura Offshore) Pty Ltd

(8) Study, FEED, and Detail Engineering of Electrical/Instrument Reliability ORF Tanjung PriokClient PT.PERTAMINA PHE ONWJ

(9) Study, FEED, and Detail Engineering of Electrical/Instrument Reliability ORF Muara KarangClient PT.PERTAMINA PHE ONWJ

Muhammad Husni Curriculum Vitae Page 3 of 5

(10) FEED Engineering of Pakugajah Development Project, Client PT.PERTAMINA EP

(11) FEED Engineering of Kuang Development Project, Client PT.PERTAMINA EP

(12) FEED Engineering of YY Field development Project, Client PT.PERTAMINA PHE ONWJ

3. PT. INDOKOMAS BUANA PERKASA (CEGELEC)

Position : Instrument & Electrical Engineer/ InspectorIndustry : Engineering, Procurement, Construction Oil & Gas CompanyDate Joined : August 2011 – April 2013Responsibilities :

Electrical and Instrument Engineering Document Review, Detail Design Review

Detail Engineering Design Preparation and review for Construction: Shut down System, Cabling Block Diagram, Instrument Layout, Logic Diagram, Cause & Effect Diagram, Connection Diagram, Loop Connection Diagram, Schematic Diagram, Hook Up Drawing, Instrument Index, I/O List, Cable Schedule, etc

Develop Construction, Pre-Commissioning, and Commissioning Procedure

Preparation and Review of Project Bill of Material (BOM) Inspect Material Project for Construction Engineering Review, Over all Integrated System and

Instrument Scope related Factory Acceptance Test (FAT), Site Acceptance Test (SAT),

Material check & inspection Preparation of Factory Acceptance test and Site

Acceptance Test Procedures Assist Pre-Commissioning & Commissioning Team Project

Project :

(1) Upgrade F&G System for ECHO Flow Station, Client PT.PERTAMINA PHE ONWJ

(2) Upgrade F&G System for LIMA Flow Station, Client PT.PERTAMINA PHE ONWJ

(3) WORTEL Development Project, Client SANTOS (West Madura Offshore) Pty Ltd

(4) OYONG extension Wellhead Platform Project, Client SANTOS (West Madura Offshore) Pty Ltd

4. PT. PINDODELI SINARMAS KARAWANG

Position : Instrument Engineer/SupervisorIndustry : Pulp & Paper IndustryDate Joined : December 2009 – August 2011Responsibilities :

Plan & Supervisory Preventive & maintenance System Operation PLC Toshiba Operating DCS & QCS ABB Operating SAP System

Muhammad Husni Curriculum Vitae Page 4 of 5

5. OTHER

On The Job Training (OJT) at PT Indonesia Power Suralaya (2007)

6. RECOMMENDATIONS/REFERENCES

1. Mr. Puji Sulistyono, Sr. Instrument/Control Engineer, SANTOS Pty Ltd.E-Mail: Puji.Sulistyono@santos.com, Mobile: +62 8161475996

2. Mr. Toto Haksoro, Sr. Principal Instrument /Control Engineer, PETRONAS Pty Ltd.E-Mail: tohaksoro@gmail.com, Mobile: +62 8113548165

Muhammad Husni Curriculum Vitae Page 5 of 5