5
ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer), Abu Dhabi, UAE. Mobile:+971-5666 30570, Email:[email protected] ----------------------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------- Page 1 of 5 KEY QUALIFICATIONS Total 16 years of experience in the field of Plant Operations, Technical HSE, Fire Gas & Detection, Active Fire Protection Design (as per NFPA, IP codes and Shell DEP), Process Safety Engineering / Consultancy in Oil & Gas production and Petroleum Refining. Engineering Consulting and PMC experience in Process Safety, Loss Prevention and Fire Safety system design in oil & gas industries. Strong education in Chemical Engineering (8 Years of university education in Chemical Engineering). Familiar with technical risk management techniques such as Hazard Identification (HZAID), Hazard and Operability (HAZOP), Quantitative Risk Assessment (QRA) and HSE Design Engineering. Tapping new projects, preparing / submitting the proposals and man-hours estimations. EDUCATION AND PROFESSIONAL STATUS Master of Applied Sciences in Chemical Engineering (with Majors in Fire & Explosion Prevention and Protection) (Jan 2003 - Apr 2004) DelTech, Dalhousie University, Canada. Bachelor of Chemical Engineering (Jan 1997 - Dec 2000), Punjab Technical University, India. Diploma in Petro-Chemical Technology (July 1992 - July 1995), MS University of Baroda, India. SOFTWARE SKILLS: Shell (Fire, Radiation, Explosion and Dispersion) FRED and DNV’s PHAST / PHAST Risk Sunrise Systems PIPENET, PHA Pro _______________________________________________________________________________________________ EXPERIENCE RECORD April 2014 Present - ZADCO PMC (Woodgroup Kenny), ZADCO, Abu Dhabi. HSE Technical & Loss Prevention Engineer Sr. Technical HSE & Loss Prevention Engineer for various ZADCO Offshore Brown Field Projects. A) Upper Zakum Offshore Brown Field Projects: 1) P8341 - Water Injection Plant Upgrade 3) P8401 - Halon Replacement for ZADCO Offshore facilities. 4) P8401-A - Water Mist and CO2 fire protection system upgrade for ZADCO Offshore facilities. 4) P8453 B - New Gas Injection / Gas lift / Oil Facilities B) ZADCO ZIRKU Island Project: 1) P8363 - F&G Upgrade for ZADCO Facilities. April 2012 April 2014 - TR (Técnicas Reunidas) Engineering ( LLC, Oman Sr. Safety & Loss Prevention Engineer For following QP (Qatar Petroleum) Projects: 1) EPIC of Injection of Kuff gas to Arab-D gas cap using North Field Injection Station 2) FEED for Replacement of 30-inch ONSAG Pipeline from Station B to Station S. 3) FEED for Expansion of Fuel gas supply and Ethane Headers at Ras Laffan Industrial City, Qatar. Prepared / Reviewed: HSE Plan, Safety and Fire Protection Philosophy, F&G detector layout and Cause & Effect, Safety and Fire fighting equipment layout, Datasheets & Specification for Fire and Safety Equipment Layouts, Participation in ENVID,HAZID & HAZOP study workshop. ENVID and HAZID Reports and Close-out Report, Environmental Waste minimization report, Construction Environmental Management Plan.

CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

Embed Size (px)

DESCRIPTION

cv

Citation preview

Page 1: CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer), Abu Dhabi, UAE. Mobile:+971-5666 30570, Email:[email protected]

-----------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------Page 1 of 5

KEY QUALIFICATIONS

Total 16 years of experience in the field of Plant Operations, Technical HSE, Fire Gas & Detection,

Active Fire Protection Design (as per NFPA, IP codes and Shell DEP), Process Safety Engineering /

Consultancy in Oil & Gas production and Petroleum Refining.

Engineering Consulting and PMC experience in Process Safety, Loss Prevention and Fire Safety

system design in oil & gas industries.

Strong education in Chemical Engineering (8 Years of university education in Chemical Engineering).

Familiar with technical risk management techniques such as Hazard Identification (HZAID), Hazard

and Operability (HAZOP), Quantitative Risk Assessment (QRA) and HSE Design Engineering.

Tapping new projects, preparing / submitting the proposals and man-hours estimations.

EDUCATION AND PROFESSIONAL STATUS

Master of Applied Sciences in Chemical Engineering (with Majors in Fire & Explosion Prevention and

Protection) (Jan 2003 - Apr 2004) DelTech, Dalhousie University, Canada.

Bachelor of Chemical Engineering (Jan 1997 - Dec 2000), Punjab Technical University, India.

Diploma in Petro-Chemical Technology (July 1992 - July 1995), MS University of Baroda, India.

SOFTWARE SKILLS: Shell (Fire, Radiation, Explosion and Dispersion) FRED and DNV’s PHAST / PHAST Risk

Sunrise Systems PIPENET, PHA Pro

_______________________________________________________________________________________________

EXPERIENCE RECORD

April 2014 – Present - ZADCO – PMC (Woodgroup Kenny), ZADCO, Abu Dhabi.

HSE Technical & Loss Prevention Engineer

Sr. Technical HSE & Loss Prevention Engineer for various ZADCO Offshore Brown Field Projects.

A) Upper Zakum Offshore Brown Field Projects:

1) P8341 - Water Injection Plant Upgrade

3) P8401 - Halon Replacement for ZADCO Offshore facilities.

4) P8401-A - Water Mist and CO2 fire protection system upgrade for ZADCO Offshore facilities.

4) P8453 B - New Gas Injection / Gas lift / Oil Facilities

B) ZADCO ZIRKU Island Project:

1) P8363 - F&G Upgrade for ZADCO Facilities.

April 2012 – April 2014 - TR (Técnicas Reunidas) Engineering ( LLC, Oman

Sr. Safety & Loss Prevention Engineer

For following QP (Qatar Petroleum) Projects:

1) EPIC of Injection of Kuff gas to Arab-D gas cap using North Field Injection Station

2) FEED for Replacement of 30-inch ONSAG Pipeline from Station B to Station S.

3) FEED for Expansion of Fuel gas supply and Ethane Headers at Ras Laffan Industrial City, Qatar.

Prepared / Reviewed: HSE Plan, Safety and Fire Protection Philosophy, F&G detector layout and Cause &

Effect, Safety and Fire fighting equipment layout, Datasheets & Specification for Fire and Safety Equipment

Layouts, Participation in ENVID,HAZID & HAZOP study workshop. ENVID and HAZID Reports and Close-out

Report, Environmental Waste minimization report, Construction Environmental Management Plan.

Page 2: CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer), Abu Dhabi, UAE. Mobile:+971-5666 30570, Email:[email protected]

-----------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------Page 2 of 5

4) Project: QP Automation Upgrade of five (5) Stations in Dukhan, QP (Fahail Main, South and North

Degassing Stations and Fahail Stripping Plant)

Review & Rationalisation of hundred and twenty (120) Fire and Gas Detector Layout drawings and respective

Cause and Effect diagram, F&G Detection Study Reports for five stations, HAZID review and close out report,

Hazardous Equipment Schedule, Hazard & Effect Register, Flare radiation and dispersion calculation, Fire &

Safety Equipment and Safety Sign Layouts, Construction Environment Management Plan, Technical

specifications for fire protection and safety equipment.

5) PDO Nimr-G & Karim West Waterflood and Zuliya Gas Plant Projects of PDO – Prepared following

projects deliverables & documents as per Shell DEP:

HSE Plan, Fire Protection & Safety Philosophy, HAZID review and closeout report, Safety Critical Element

Identification and Performance Standards (HSECS), Fire Dispersion and Explosion Consequence Modelling

Report, Datasheets and Specifications for Safety Equipment and F&G layouts and Cause-Effect,

Firewater & Foam system P&ID and Layouts, Flare Radiation & Noise Study Report, Human Factor

Engineering Review, SIMOPS report with MOPO, Participation in PDMS 3-D Model reviews, participations in

Design reviews, HAZOP, SIL / IPF reviews and Shell “Flawless Project Delivery” drive.

6) Inter Discipline Check (IDC) on other discipline deliverables: Interacted with other disciplines and with

clients on technical safety matters. Participated and provided Safety at project meetings and design review

sessions. Attended weekly Project review meetings.

7) Preparation of CTRs for various Proposals for ITB of Oil & Gas Industry Projects.

May 2011 - Feb 2012 - NAMA MOTT MACDONALD - Oil, Gas & Petrochem Unit, Abu Dhabi

Sr. HSE Engineer

1) Project: ADMA OPCO Power Upgrade for Zakum Offshore Super Complexs (Offshore Oil & Gas).

Prepared: HSE Philosophy, HAZID participation and Report, Fire Risk Assessments & Fire Protection adequacy

report (as per NFPA Codes), Emergency Escape & Rescue report, Hazardous Area Classification Drawings.

2) Project: Zakum Development Company (ZADCO) Zakum facilities, EPCM Project – Thammama II, WAD

Phase 1 (Oil & Gas handling Platforms - Offshore).

Prepared and Updated: HSE Action Tracking Register, Reviewed: Dropped Object Study, Hazardous Area

Classification Drawings, Fire & Gas Detector layout, Escape route drawings, Fire fighting equipment layout.

Reviewed: PHSER-1 (FEDD Phase) & PHSER -2 (DD Engineering Phase).

3) Project: Zakum Development Company (ZADCO) - Arzanah Power Generation Facilities (Oil & Gas

handling facility - Offshore).

Prepared: Safety and Fire fighting MTO, HSE Plan, HSE and Fire Protection & Alarm Philosophy, Specs for

Water Mist Fire Protection System, F&G Detector layout, Fire & Gas Cause and Effect and Effect, Escape

route, safety and Fire fighting equipment layout, Fire Water Demand Calculations, Fire water Sprinkler systems.

Participated and generated HAZID, MOPO and SIMOPS Report.

4) Project: South Pars Phase 11 (Oil & Gas handling facility - Onshore) of National Iran oil company, EPC

by CNPC, China.

Reviewed / Prepared: Fireproofing of equipment supports & structures, active & passive Fire Protection

philosophy, Firewater and Foam Demand Calculations (as per NFPA and IP codes), Fire water Spray systems

Firewater network, PFD & P&ID, Hydraulic Calculation with PIPENET for Firewater & Foam protection system

for Condensate Stabilization Unit and Condensate tank farm.

Page 3: CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer)

----------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------Page 3 of 5

June 2010 – May 2011 WorleyParsons – Oman Engineering,

Safety and Risk Engineer

Was involved in various Oil & Gas Handling projects of Petroleum Development Oman & Oman Oil Refinery:

1) Performed Fire safety assessment, Fire & Gas detector layout and Cause & Effect mapping (with Shell

Standards and Shell (FRED software) Fire, Radiation, Explosion, and Dispersion.

2) ALARP Sheets generation and ALARP demonstrations for various issues involving higher risk.

3) Fire Risk Assessments, Fire proofing and hazardous area classification.

4) HSE Plan, HSE Philosophy, Design Safety Case, Fire proofing requirements for new projects.

5) 3-D Model review for HSE relevant issues and HSE actions close out with other Engineering disciplines.

6) Generated Matrix of Permitted Operation (MOPO), SIMOPS report, HSE Inputs to Project Design Basis.

7) Fire, Explosion and Dispersion analysis report, and Review of Qualitative Risk Assessment Reports.

8) Fire Risk Assessments & Fire protection adequacy report (as per Shell DEP and NFPA codes).

9) Developed Safety Critical Element Identification and Performance Standards (HSECS).

10) Prepared HSE part of Engineering and Construction Scope of Work. Conducted HAZID study (using

PHAPRO) HabHab Chemical Injection Project.

11) Inter Discipline Check (IDC) on other discipline deliverables. Interacted with other disciplines and clients on

technical safety matters. Participated and provided safety inputs in design review

June 2009 – May 2010 Petrofac – Chennai office,

Senior HSE Engineer

Was involved with 1) Aramco’s – Yanu Refinery Hydrocracker Unit, 2) Takreer Refinery Expansion Project and 3)

Algiers Refinery – Algeria expansion project and 4) ADMA OPCO - Offshore Extension and Modifications Projects.

Prepared / Reviewed:

1) Active Fire protection, Fire & Gas detection system layout reviews with dispersion modelling (with PHAST).

2) Reviewed HSE Plan, HSE and Fire Protection & Alarm Philosophy, F&G Detector layout and MTO for F&G

and safety equipments.

3) Design of active protection system and passive fire proofing details.

4) Prepared Firewater Demand and Input to Firewater Layout PFDs and P&IDs (as per NFPA).

5) Prepared and Reviewed Fire protection, Fire & Gas Detection and HSE Philosophies.

6) Fire Fighting and Safety Equipment Drawings, Firewater and Foam Demand Calculations (as per NFPA and

IP codes),

7) Fire Water Spray systems Design, Firewater network PFD & P&ID.

8) 3-D Model review with other Engineering disciplines.

9) Fire proofing and hazardous area classification drawings.

10) Fire water layout, Fire water demand calculation (as per NFPA) and sprinkler system design and layout (with

PIPENET).

April 2005 – May 2009 Chilworth Technology / Chilworth Safety & Risk Consultancy

Senior Consulting Engineer

1) Co-Chaired HAZOP study of entire Petroleum Refinery (650 P&ID) HPCL, Mumbai Refinery.

2) HAZOP study of Sulphur recovery unit of HEML Refinery - EPC by TOYO Engineering.

3) Quantitative Risk Assessment (QRA) of Mangalore refinery.

4) Safety, Health and Environment Audit for Oil and Natural Gas Commission (ONGC) for their five assets which

consisted of more than oil production 80 Installation, 150 connected wells and 30 drilling rigs.

Page 4: CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer)

----------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------Page 4 of 5

April 2005 – May 2009 Chilworth Technology (Experience Continued) ….

Senior Consulting Engineer

5) Quantitative risk assessment of LPG gas bottling station of ELF gas.

6) Quantitative risk assessment Sterlite Optical Technology Aurangabad

7) QRA Study of cross country Methane gas pipeline & booster stations for Reliance Oil & Gas.Safety, Fire Risk

Assessments and Fire Protection Requirements for Anabond Tantulum project handling radioactive nuclear

waste (Niobium).

8) Quantitative risk assessment for layout of Natural gas Pipeline for Mahanagar Gas Mumbai.

9) Review of design and construction plans, drawings, and specifications for Fire protection systems for of

United Phosphorus Bharuch, Gujarat.

10) On site emergency plan of SABIC Research and Technology Pvt. Ltd, Vadodara, India.

11) Corrosion prevention and control study for JOL’s three sites Nira, Samalaya and Nujangud.

12) HAZID Study (using PHAPRO) of Jubilant Oil and Gas plant.

13) Fire Risk Assessments and Fire Fighting and Safety Equipment Layout Drawings of JOL’s three sites Nira,

Samalaya and Nujangud.

14) Fire Risk Assessments & Fire safety audit of HPCL, Mumbai Refinery.

15) HSE Audit and assisted HAZOP for Indian Oil Corporation Limited – Gujarat & Haldia.

16) Conducted the training on HAZOP software at Hindustan Petroleum Corporation Limited (Mumbai Refinery).

17) Review of design drawings and specifications for Fire protection systems, access, water supplies, processes,

and hazardous materials and other Fire and safety issues for Bihar caustics and chemicals.

18) HAZID and HAZOP study of Bihar Caustics and Chemicals.

19) Fire Audit of Abhishek Industries (Trident Group) three power plants.

20) Fire Risk Audit of Ranbaxy labs and review of Fire protection measures in the plant.

21) Fire and dust explosion study (as Per NFPA codes) for Aarti Industries, Mumbai.

22) With teams of Lurgi and EIL participated in five days HAZOP study of Haldia Refinery’s offsite and utilities of

Indian Oil Corp Ltd.

23) With team of UOP, EIL and Bharat petroleum refinery, participated in HAZOP study for Continuous Cracker

units of Bina & Cochi Refineries.

24) HAZID Study (using PHAPRO) HAZOP and SIL study of Indian Rayon’s power plant at Veraval, Gujarat

25) Attended five day training Quantitative Risk Analysis Safety and Risk Management program at IIT, Mumbai.

26) Gave two day HAZOP training to IPCA labs supervisors, production and management at Ratlam.

27) Fire safety and electrostatic hazard assessment (as Per NFPA codes) for Sandoz Pharma.

28) Fire & explosion and electrostatic hazards assessment (as Per NFPA codes) for the Riddhi Siddhi Gluco Biols

(RSGB) Ltd of their Gokak, Karnataka site.

29) Safety, Health and Environment Audit for Oil and Natural Gas Commission for their five assets namely which

consisted of more than oil production 80 Installation, 150 connected wells and 30 drilling rigs.

30) Participated in HAZOP Study for Power Plant & Utilities of Indian Oil Corporation Limited, Mathura.

31) Seminar presentation on Fire & Explosion prevention and protection at Matrix Pharma Labs at Hyderabad.

32) Seminar presentations on the topics of “fire / explosion prevention and protection”, “electrostatic hazard

assessment & control” and “chemical reaction hazard” – At Federation of Indian Chamber of Commerce and

Industries – New Delhi and various other companies in India.

33) Review of design drawings and specifications for Fire protection systems, Fire and safety issues for Matrix

Pharma Labs at Hyderabad.

34) Fire Risk Assessment of Lupin Pharma Limited, Mandideep Bhopal.

35) HAZID and Mini QRA of United Phosphorus Ltd., Ankleshwar

36) Fire Risk Assessment & Quantitative Risk Assessment study of Pidilite Industries, Mumbai & Vapi Plants.

37) COMAH / Disaster Management Plan for Abhishek Industries (Trident Group)

Page 5: CV-Alok-Sr. Safety & Loss Prevention Engg (June-2015)

ALOK SINGH (CV - Sr. Safety & Loss Prevention Engineer)

----------------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------Page 5 of 5

April 2004 – March 2005 Alfa-Projects, India HSE Engineer

1) HAZID Study and HSE Audit for Pidilite industries high pressure batch reaction.

2) HAZID Study and Quantitative Risk Analysis for Chlorine, Ammonia tonne for SRF Ltd Rajasthan.

3) Review of design and construction plans, drawings, water supplies, processes, and hazardous materials and

other fire and safety issues for of United Phosphorus Bharuch, Gujarat.

4) Quantitative Risk Assessment of Navin Fluorine Industries - Surat.

5) Fire audit and Disaster Management Plan of Navin Fluorine Industries - Surat.

6) COMAH / Disaster Management Plan and Hazard and Operability Study for Galaxy surfactants- Taloga

7) GIDC, Maharashtra. Which including design and specification of relief and venting systems.

8) Consequence and Risk analysis, of Jubilant Oil and Gas plant.

2003 – 2004 STUDY DURATION FOR MASTER OF APPLIED SCIENCES IN CHEMICAL ENGINEERING AT

DELTECH, DALHOUSIE UNIVERSITY, CANADA.

Jan 2001 – Dec 2002 Gujarat Narmada Valley Fertilizer (Topse Process), Bharuch, India

HSE Officer

Supervised a team of 2 supervisors and 10 production assistants for daily production issues and continuous

process improvements by using Statistical Process Control and helped in implementing HSE plans.

Facilitate and document process hazard analyses, maintained and updated safety policies / procedure and did

Process Safety Management audits.

Documented production process for improved production efficiency.

1997 – 2000 STUDY DURATION FOR BACHELOR OF CHEMICAL ENGINEERING AT PUNJAB TECHNICAL UNIVERSITY, INDIA.

Aug 1995 – Dec 1996 Indian Oil Corporation Limited, Baroda, India

Production Engineer

Worked as a production Engineer:

Was involved with daily production operations, monitored process and product quality in collaboration with QC.

Implemented action plans for achieving ISO-9000 certification

SIX MONTHS INDUSTRIAL TRAININGS / CO-OP TERMS:

Trainee at Gujarat State Fertilizers Corporation, Polymer Unit, Baroda, India trained in production of methyl

methacrylate monomer (MMA) and manufacture of ploy MMA sheets and pellets. – 6 Months

Trainee at Gujarat Narmada Valley Fertilizer (Topse Process), Bharuch, India. GNFC – trained in manufacturing of

methanol, urea, and ammonium sulfate. Evaluation by Production Manager: graded A+. 6 Months

AWARDS AND ACHIEVEMENTS:

Two years as Research and Teaching Assistance at Department of Chemical Engineering, DalTech, Dalhousie

University, Canada.

Graduate Scholarship from Faculty of Graduate Studies, Dalhousie University

TRAININGS & CERTIFICATES:

(1) Critical National Infrastructure Authority (CNIA) Pass, (2) Fire Fighting & H2S/BA Awareness & (3) Sea Survival and

Helicopter Underwater Egress (T-BOSIET)

LANGUAGE CAPABILITY: English : Spoken – fluent; written – fluent; reading – fluent.

PERSONAL DETAILS: (1) Year of Birth: 1974, (2) Citizen of India, (3) Married.