RDM2.0 GENSYS2.0 CORERemote display module and core unitfor all-in-one genset control and paralleling unit

The kit RDM 2.0 and GENSYS 2.0 CORE has the same properti es as the GENSYS 2.0 and allows several power plant possibiliti es. It is an extendable system that can be opti mized to your space facility. The display shows mechanical and electronical parameters for intuiti ve operati on and users can switch screens, set password, change setpoints and view history record.

GENSYS2.0GENSYS2.0 is a control unit designed for generator electrical panels. It combines all necessary functi ons:

• Three phase mains failure• Engine start/stop and protecti on• Alternator control and protecti on• Mechanical parameters display• Electrical parameters display• Genset synchronizati on• Load sharing and kW control• Load sharing and kVAR control

GENSYS2.0 is confi gurable via its front panel or via a PC with CRE Confi g Soft ware. The unit has analog load sharing lines and is compati ble with all types of analog load sharing modules.

MASTER2.0All-in-one mains paralleling unitwith integrated PLC

Master2.0 is a power plant controller for gensets in parallel with one or several mains.

This includes all necessary functi ons:• Several mains management• Three phase mains failure detecti on• Electrical protecti on• Electrical parameters display• Manual and automati c paralleling with mains

(frequency, phase and voltage)• kW power management with several modes• No break change over with load transfer• Permanent paralleling in base load• Permanent paralleling in peak shaving mode• Power factor control when paralleling with mains.• Dyn11 capabiliti es (HV phase compensati on)

Master2.0 also has analog load sharing lines and is compati ble with all type of analog load sharing modules.

O U R G E N S E T S S O L U T I O N SO U R G E N S E T S S O L U T I O N SO U R G E N S E T S S O L U T I O N S

• Permanent paralleling in peak shaving mode• Power factor control when paralleling with mains.• Dyn11 capabiliti es (HV phase compensati on)

Master2.0 also has analog load sharing lines and is compati ble with all type of analog load sharing modules.

Permanent paralleling in peak shaving modePower factor control when paralleling with mains.Dyn11 capabiliti es (HV phase compensati on)

Master2.0 also has analog load sharing lines and is compati ble

FEATURES• Minimum opti ons• Multi -functi on graphic display• Fully compati ble with all speed governors & AVRs• 5 isolated serial ports• J1939 communicati ons

FEATURES• Minimum opti ons• Multi -functi on graphic display• Fully compati ble with all speed governors & AVRs• 5 isolated serial ports• J1939 communicati ons

FEATURES• Several power plant possibiliti es• Multi -control HMI / HMI redundancy• I/O fl exibility• Internal logic sequences programmable by equati ons• Multi -functi on graphic display• 5 isolated serial ports• J1939 communicati ons• Fully compati ble with all speed governors & AVRs

C2SAuto synchronizer and safety column

This second generati on of microprocessor module combines all the visualizati on and control functi ons needed to couple a generator to a bus bar manually: display of the phase, frequency and voltage diff erences, a safety relay which monitors these three parameters and indicates the status of the installati on.

This new version does not need an external DC power supply. Indeed, the C2S is energized with the busbar. The reduced size allows the use of DIN92 format tools.

O U R G E N S E T S S O L U T I O N S

FEATURES• All types of digital or analog sensors : K & J

termocouples, PT 100, J1939 communicati ons, Ω, 0-20 A, 0-10 VDC

• Embedded PLC• Extended communicati on ports • Supply: 8-38 VDC• Dimensions: 260x160x90mm

FEATURES• Led synchronoscope: phase, frequency &

voltage diff erences and safety relay• Dimensions: 260x160x90mm• Manual & automati c modes• Dimensions: 160x96x68mm

GENSYS2.0 LTAll-in-one genset control and paralleling unit

GENSYS2.0 LT is a control unit designed for generator electrical panels. It combines all necessary functi ons:• Three phase mains failure• Engine start/stop and protecti on• Alternator control and protecti on• Mechanical parameters display• Electrical parameters display• Genset synchronizati on• Load sharing and kW control• Load sharing and kVAR control

GENSYS2.0 LT is confi gurable via its front panel or via a PC with CRE Confi g Soft ware. The unit has analog load sharing lines and is compati ble with all types of analog load sharing modules.

UNIGEN FAMILYManual & automati c synchroniser and load sharer

The modules of the UNIGEN FAMILY are used on generator sets that requires synchronising, load sharing, load and unload management as well as paralleling features.

UNIGEN PLUS & UNIGEN can be used to parallel up to 8 gensets together with the CANbus communicati on.

Advantages:• Power load sharer (kW/kVAR)• Load dependant start• Reverse kW protecti on• Compati ble with all AVR & speed governors• Super droop functi on• CANbus • Modbus communicati on (read & write)

CRE CONFIGConfi gurati on soft ware

CRE Technology developed a new PC soft ware which allows you to connect to multi ple GENSYS Family modules.

This user-friendly soft ware allows you to control, confi gure and monitor your power plant in real-ti me.

You will then have access to the soft ware interface, which is composed of three parts:• SCADA mode• Confi gurati on mode• System Mode

CRE Confi g soft ware allows you to confi gure and monitor up to 14 modules.

AFTER SALES SERVICE

All the CRE Technology products are delivered with one year warranty, and if necessary we will be happy to come on site for product commissioning or troubleshooti ng. The company also provides specifi c trainings on our products and soft wares.

Our team of dedicated engineers will help you on the fi eld or over the phone from Monday to Friday on:+33 492 38 86 86

BENEFITS FROM OUR EXPERIENCE

Thanks to a 30 year experience in the paralleling system and energy control, CRE Technology conti nues to develop soluti ons to meet market increasing expectati ons.

Our engineers develop high technol-ogy soluti ons combining reliability, modularity and intuiti vity. They also can customize our products to your wish.

COME AND JOINCRE TEAM

We are currently seeking partners to represent our range of products worldwide.

Joining our team represents a great opportunity to grow and develop your business, selling, promoti ng and supporti ng our products.

EASY PLCProgram and customize yourinternal logical sequences

CRE’s Easy PLC is a logic editor which provides graphical interface to program PLC equati ons. The tool is able to gene-rate CRE propriety equati ons for CRE’s products such as GENSYS2.0 family.

Easy PLC simplifi es the process of writi ng propriety equati ons thanks to a user-friendly graphic environment. That includes many sheets in which the user can create inputs and outputs equati ons through «operators».

CRE SOFTWARES

www.cretechnology.com

cONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT UScONTACT USCRE TECHNOLOGY

130, allée Charles-Victor Naudin Zone des Templiers • Sophia Anti polis

06410 BIOT • FRANCETel: +33 (0) 492 38 86 82 • Fax: +33 (0) 492 38 86 83info@cretechnology.com • www.cretechnology.com