Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-1
Contents of Part 4
Part 4 Local government infrastructure plan................................................... 4-2
4.1 Preliminary ............................................................................................................. 4-2
4.2 Planning assumptions .......................................................................................... 4-2
4.2.1 Population and employment growth ........................................................... 4-5 4.2.2 Development ............................................................................................... 4-6 (3) A summary of the assumptions about future residential and non-residential
development for the planning scheme area is stated in Table 4.2.2.1 ...... 4-6 4.2.3 Infrastructure demand ................................................................................. 4-6
4.3 Priority infrastructure area ................................................................................... 4-7
4.4 Desired standards of service ............................................................................... 4-7
4.4.1 Water supply network ..................................................................................... 4-7 4.4.2 Sewerage network ......................................................................................... 4-8 4.4.3 Transport network .......................................................................................... 4-9 4.4.4 Stormwater network .................................................................................. 4-10 4.4.5 Public parks and land for community facilities network ............................ 4-11
4.5 Plans for trunk infrastructure ............................................................................ 4-14
4.5.1 Plans for trunk infrastructure Maps .............................................................. 4-14 4.5.2 Schedule of Works .................................................................................... 4-15
Editors note ─ Extrinsic material ...................................................................................... 4-15
Tables in Part 4 Table 4.2.1 Relationship between LGIP development categories, LGIP development types and uses……………………………………………………4-3 Table 4.2.1.1 Population and employment assumptions summary…………………………4-6 Table 4.2.2.1 Residential dwellings and non-residential floor space assumptions summary…………………………………………………………………………..4-6 Table 4.4.1.1 Desired Standards of Service – Water Supply………………………….…….4-7 Table 4.4.2.1 Desired Standards of Service – Sewerage……………………….…………...4-8 Table 4.4.3.1 Desired Standards of Service – Transport………………………..…………...4-9 Table 4.4.4.1 Desired Standards of Service – Stormwater…………………………………4-11 Table 4.4.5.1 Desired Standards of Service – Public parks and land for community
facilities…………………………………………………………………………...4-12 Table 4.4.5.2 Public parks and community land design criteria……………………………4-13 Table 4.4.5.3 Standard embellishments for public parks…………………………………...4-14 Table 4.5.1 Planning horizon for a trunk infrastructure network…………………………4-15
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-2
Part 4 Local government infrastructure plan
4.1 Preliminary
(1) This local government infrastructure plan has been prepared in accordance with the requirements of the Sustainable Planning Act 2009.
(2) The purpose of the local government infrastructure plan is to: a) integrate infrastructure planning with the land use planning identified in the planning
scheme;
b) provide transparency regarding a local government’s intentions for the provision of
trunk infrastructure;
c) enable a local government to estimate the cost of infrastructure provision to assist its
long term financial planning;
d) ensure that trunk infrastructure is planned and provided in an efficient and orderly
manner;
e) provide a basis for the imposition of conditions about infrastructure on development
approvals.
(3) The local government infrastructure plan: a) states in Section 4.2 (planning assumptions) the assumptions about future
growth and urban development including the assumptions of demand for each
trunk infrastructure network;
b) identifies in Section 4.3 (priority infrastructure area) the prioritised area to
accommodate urban growth up to 2013 ;
c) states in Section 4.4 (desired standards of service) for each trunk infrastructure
network the desired standard of performance;
d) identifies in Section 4.5 (plans for trunk infrastructure) the existing and future trunk
infrastructure for the following networks:
i) Water Supply;
ii) Sewerage;
iii) Transport;
iv) Stormwater;
v) Public parks and land for community facilities1
e) Provides a list of supporting documents that assist in the interpretation of the local
government infrastructure plan in the Editor’s note – Extrinsic material at the end
of section 4.
4.2 Planning assumptions
(1) The planning assumptions state the assumptions about:
(a) population and employment growth;
1 The Public parks and land for community facilities network was referred to in previous Infrastructure Plans as the Public parks and community land network
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-3
(b) the type, scale, location and timing of development including the demand for
each trunk infrastructure network.
(2) The planning assumptions together with the desired standards of service form a basis
for the planning of the trunk infrastructure networks and the determination of the priority
infrastructure area.
(3) The planning assumptions have been prepared for:
(a) the base date 2011 and the following projection years to accord with future
Australian Bureau of Statistics census years:
(i) mid 2016
(ii) mid 2021
(iii) mid 2026
(iv) mid 2031
(v) mid 2036
(vi) mid 2041
(vii) Ultimate.
(b) the LGIP development types in column 2 that include the uses in column 3 of
table 4.2.1.
(c) The projection areas identified on Local Government Plan Priority Infrastructure
Area (PIA) Maps 1-7 in Schedule 3 – Local Government infrastructure plan
mapping and tables.
Table 4.2.1 —Relationship between LGIP development categories, LGIP development types and uses
Column 1
LGIP development category
Column 2
LGIP development type
Column 3
Uses
Residential development
Detached dwelling Caretaker’s accommodation
Dwelling house (including secondary dwelling)
Attached dwelling Dual occupancy
Dwelling unit
Multiple dwelling
Retirement facility
Short-term accommodation
Other dwelling Community residence
Home based business
Non-resident workforce accommodation
Relocatable home park
Residential care facility
Rooming accommodation
Rural workers accommodation
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-4
Column 1
LGIP development category
Column 2
LGIP development type
Column 3
Uses
Tourist Park
Non-residential development
Retail Adult store
Agricultural supplies store
Brothel
Bulk landscape supplies
Car wash
Food and drink outlet
Garden centre
Hardware and trade supplies
Market
Outdoor sales
Parking station
Sales office
Service station
Shop
Shopping Centre
Showroom
Wholesale nursery
Commercial Bar
Club
Function facility
Hotel
Indoor sport and recreation
Nature-based tourism
Nightclub entertainment facility
Office
Resort complex
Theatre
Tourist attraction
Veterinary services
Industry Extractive Industry
High impact industry
Low impact industry
Medium impact industry
Research and technology industry
Service industry
Special industry
Transport depot
Warehouse
Community Purposes Cemetery
Child care centre
Community care centre
Crematorium
Community use
Detention facility
Educational establishment
Emergency services
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-5
Column 1
LGIP development category
Column 2
LGIP development type
Column 3
Uses
Funeral parlour
Health care services
Hospital
Major sport
Recreation and entertainment facility
Motor sport facility
Outdoor sport and recreation
Park
Place of Worship
Rural and Other Uses Air services
Animal Husbandry
Animal keeping
Aquaculture
Cropping
Environment facility
Intensive animal industry
Intensive horticulture
Landing
Major electrical infrastructure
Permanent plantation
Renewable energy facility
Roadside stall
Rural industry
Substation
Telecommunications facility
Utility installation
Winery
(4) Details of the methodology used to prepare the planning assumptions are stated in
the extrinsic material.
4.2.1 Population and employment growth
(1) A summary of the assumptions about population and employment growth for the
planning scheme area is stated in Table 4.2.1.1 – Population and employment
assumptions summary.Table
Table 4.2.1.1—Population and employment assumptions summary
Column 1 Description
Column 2 Assumptions
Base date
(2011) 2016 2021 2026 2031 2036 2041
Ultimate development
Population* 33,473 37,141 40,115 42,793 45,462 48,114 51,036 75,975
Employment 15,389 16,593 17,569 18,448 19,325 20,195 21,155 29,342
* Existing and projected population includes a tourist population of 1,562 (2011) (projected to increase at the same rate of growth as resident population) and non-resident workers
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-6
population for urban areas of 2,370 (assumes 50% of 4,740 which is the total 2014 estimated non-resident workers population in CHRC based on projections obtained from the QGSO Bowen Basin non-resident population projections 2014 to 2020).
(2) Detailed assumptions about growth for each projection area and LGIP development
type category are identified in the following tables in Schedule 3 Local government
infrastructure plan mapping and tables:
(a) for population, Table SC3.2.1 – Existing and projected population
(b) for employment, Table SC3.2.2 – Existing and projected employees
4.2.2 Development
(1) The developable area is identified on Local Government Infrastructure Plan Priority
Infrastructure Area (PIA) Maps 1 – 7 in Schedule 3—Local government infrastructure
plan mapping and tables.2
(2) The planned density for future development is stated in SC3.2.3 in Schedule 3—Local
government infrastructure plan mapping and tables.
(3) A summary of the assumptions about future residential and non-residential development for the planning scheme area is stated in Table 4.2.2.1
Table 4.2.2.1—Residential dwellings and non-residential floor space assumptions summary
Column 1 Description
Column 2 Assumptions
Base date
(2011) 2016 2021 2026 2031 2036 2041
Ultimate development
Residential dwellings
12,178 13,601 14,690 15,664 16,585 17,553 18,619 27,717
Non-residential floor space (m2 GFA)
1,034,373 1,113,433 1,177,539 1,235,245 1,292,770 1,349,932 1,412,909 1,950,407
(4) Detailed assumptions about future development for each projection area and LGIP
development type are identified in the following tables in Schedule 3 Local government
infrastructure plan mapping and tables:
(a) for residential development, Table SC3.2.4
(b) for non-residential development, Table SC3.2.5
4.2.3 Infrastructure demand
(1) The demand generation rate for a trunk infrastructure network is stated in Column 4 of
SC3.2.3 in Schedule 3 Local government infrastructure plan mapping and tables.
2 The assessment of the planning scheme capacity and the ‘ultimate’ development have taken into account the following constraints to development: Airport environs; water resources; regional infrastructure; flood hazards; bushfire hazards; biodiversity, waterways & vegetation; extractive resources; easements.
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-7
(2) A summary of the projected infrastructure demand for each service catchment is stated
in:
(a) for the water supply network, Table SC3.2.6
(b) for the sewerage network, Table SC3.2.7
(c) for the transport network, Table SC3.2.8
(d) for the Public parks and land for community facilities network, Table SC3.2.9.
4.3 Priority infrastructure area
(1) The priority infrastructure area identifies the area prioritised for the provision of trunk
infrastructure to service the existing and assumed future urban development up to
2031.
(2) The priority infrastructure area is identified on Local Government Infrastructure Plan
Priority Infrastructure Area (PIA) Maps 1 – 7 in Schedule 3—Local government
infrastructure plan mapping and tables.
4.4 Desired standards of service
(1) This section states the key standards of performance for a trunk infrastructure
network.
(2) Details of the standard of service for a trunk infrastructure networks are identified in
the extrinsic material.
4.4.1 Water supply network
Table 4.4.1.1 Desired Standards of Service – Water Supply
Planning Standard
Community Outcome
Ensure drinking water complies with the NHMRC Australian Drinking water guidelines for colour, turbidity and microbiology. >95% water test compliance.
Provides uniform quality of water monitored in relation to recognised standards.
Provide a safe and reliable water supply.
Safeguards community health.
Comply with Integrated Environmental Management Strategy and associated Environmental Management Plans and (former) Department of Environment and Resource Management planning guidelines for water supply and sewerage.
Provides for system operation and monitoring in accordance with recognised standards.
Ensures environmental controls maintained.
Ensures potable water is provided in a manner consistent with environmental standards.
Reduce Non-Revenue Water (water that has been produced and is ‘lost’ before it reaches the customer, including physical losses or leakages, commercial losses such as water meter inaccuracies, unauthorised consumption, and data handling errors, and unbilled authorised consumption such as water used for firefighting)..
Extend asset life
Defer system augmentation
Improve environmental flows
Reduced greenhouse gas emissions
Reduce extraction of water from source
Defer requirement for new water source
Provide infrastructure which minimises power usage.
Reduced cost of energy
Cost effective service for community
Reduced greenhouse gas emission
Develop and maintain excellence in appropriate Reduced cost of energy and chemicals
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-8
new technologies.
Cost effective service for community
Reduced greenhouse gas emissions
Improve water quality.
Reduced environmental effects from chemical production
Provide infrastructure which minimises whole of life costs.
Cost effective service for community
Reduced energy cost
Reduced maintenance costs
Reduced overall operation costs
Reduced replacement costs
Reduction in disposal of waste
Reduced environmental effects from chemical production.
Design Standard
Community Outcome
Design water supply infrastructure to comply with:
The CHRC planning scheme; and
CMDG; and
IPEWA; and
Plans for Trunk Infrastructure – Water Supply; and
Water Act; and
Department of Energy and Water Supply planning guidelines for water supply and sewerage.
Provides uniform quality of water monitored in relation to recognised standards.
Provide a safe and reliable water supply.
Safeguards community health.
4.4.2 Sewerage network
Table 4.4.2.1 Desired Standards of Service – Sewerage
Planning Standard
Community Outcome
Ensure wastewater collection, transportation and treatment system remains effective.
Reduced impact from blockages, overflows and spills.
Reduced impact on residents
Minimises release of nitrogen and phosphorous to the environment
Improved community health
Reduced greenhouse gas emissions
Provide infrastructure which minimises power usage.
Reduced cost of energy
Cost effective service for community
Greenhouse gas reduction
Provide infrastructure which minimises whole of life costs.
Cost effective service for community
Reduced energy cost
Reduced maintenance costs
Reduced overall operation costs
Reduced replacement costs
Reduction in disposal of waste
Reduced greenhouse gas emissions
Reduced environmental effects from chemical production.
Achieve excellence in appropriate new technologies.
Reduced cost of energy and chemicals
Cost effective service for community
Minimise work, health and safety risks
Reduced greenhouse gases
Ensure optimal odour control
Reduced environmental effects from chemical production
Rapid response to breakages
Reuse effluent where possible.
Beneficial use of reclaimed water and biosolids
Opportunity for cost recovery for reclaimed water treatment
Reduction in use of potable water supply and treatment
Reduction in release of nitrogen and phosphorous to the
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-9
environment
Reduction of raw water extraction from source
Design Standard
Community Outcome
Design sewerage infrastructure to comply with:
The CHRC planning scheme;
CMDG;
WSA 02-2002 Sewerage Code of Australia;
WSA 02-2014 Gravity Sewerage Code of Australia;
WSA 04-2005 Sewage Pumping Station Code Of Australia;
WSA 06-2008 Vacuum Sewerage Code;
WSA 07-2007 Pressure Sewerage Code of Australia.
Environmental Protection Act 2009 and Environmental Protection (Water) Policy 2009 requirements and guidelines;
Plan for Trunk Infrastructure – Sewerage;
Department of Energy and Water Supply Planning Guidelines for Water supply and Sewerage 1-11 – March 2014 (as amended);
Water Supply (Safety and Reliability) Act
The Water Act and Standard Sewerage Law.
Noise control
No adverse visual effect
Control of overflows from system
Improves community health
Ensure odour control
Minimise environmental effects
Reduction in contaminated discharges
Ensure infiltration and inflow in the sewerage collection and transportation system remains within industry acceptable limits (compliance with Environmental licences, IEMS and associated EMPs).
Reduced cost of energy for effluent transport, treatment and disposal
Minimise customer overflow issues
Maximise life of system
Reduced overflows to local waterways
4.4.3 Transport network
Table 4.4.3.1 Desired Standards of Service – Transport
Planning Standard
Community Outcome
Road Network
Define the road network as a functional Urban and Rural hierarchy and freight routes which supports the urban and rural settlement patterns and commercial and economic activities.
Protects the amenity of residential communities by removing non-local traffic
Improves local safety by removing “through” traffic
Maintains reliability of connectivity.
Reduces fuel consumption and emission levels by sustaining efficient operating speeds
Maintains travel speeds in off-peak periods
Reduces vehicle operating costs.
Improves public transport operation by improving travel speeds.
Supports economic growth by developing efficient and integrated transport networks
Minimises through traffic and heavy vehicles in residential areas
Limits community severance.
Cycleway and Footpath Network
Provide safe and convenient pedestrian pathways and cycleways network in accordance with CMDG.
Reduces fuel consumption and emission levels through the use of efficient transport modes
Encouragement of cycling and walking has positive health outcomes
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-10
Promotes health benefits
Improves transport opportunities for local trips
Ensures an acceptable level of amenity for users
Lot reconfiguration layouts provides for a highly connected and permeable path network between home and key activity nodes.
Allows for high propensity to use walk and cycle options when convenient connections are provided;
Reduces the need for motor vehicle based trip making to daily needs;
Provides better connection to PT systems on major collector street and higher order roads
Design Standard
Community Outcome
Road Network
Road network system is designed and provided in accordance with;
CMDG; and
(Former) Department of Main Roads ‘Planning and Design Manual’.
Reduce delays during peak periods.
Improve safety by reducing vehicle speed differentials.
Supports efficient and integrated freight movement network.
Design bridges and culverts with appropriate flood immunity and capacity to convey floodwater, taking into account the Council’s road hierarchy and CMDG. Construction of bridges and culverts must not adversely impact on the natural environment, such as through the loss of vegetation and undesirable impacts on bio-diversity. Design bridges and culverts to maintain fauna and recreational links.
Ensures road crossings operate safely in times of inundation
Reduces the risk of flooding for upstream properties
Provides opportunities for extended pedestrian and bicycle links
Enhances ecological links
Cycleway and Footpath Network
Cycleway network is designed and provided in accordance with:
Plans for Trunk Infrastructure – Cycleway and Footpaths, and
the CMDG adopted by Council by resolution.
Encourage cycling and walking as acceptable alternatives.
Infrastructure provided meets recognised standards.
4.4.4 Stormwater network
Table 4.4.4.1 Desired Standards of Service – Stormwater
Planning Standard
Community Outcome
Provide system of shared stormwater infrastructure allowing free and safe drainage of urban land while maintaining or improving the quality of run-off.
Minimises inundation of habitable areas.
Minimises the damage and risk associated with flooding.
Minimises the impact of development on the ecological health and water quality within waterway corridor.
Minimises impact on the community of mosquitoes and biting midges.
Ensure the use of Water Sensitive Urban Design and other types of on-site infrastructure to minimise impact on trunk infrastructure
Provides waterways infrastructure at least life cycle cost.
Reduces the scale of shared infrastructure by optimising on site solutions.
Improves water quality at the point of discharge to benefit the waterway corridor’s health.
Ensure sufficient buffers from urban development along waterway corridors for ecological links (including rehabilitation of degraded waterway corridor banks, where required).
Maintain or improves environment amenity such as scenic values and natural construction.
Erosion and sedimentation is minimised.
Negative impacts on adjoining and downstream properties are minimised.
Protects environmentally sensitive areas from development.
Ensure natural stream processes are maintained within waterway corridors.
Reduces the need for costly structural treatments of waterway corridor banks.
Provides for natural processes of accretion, erosion and sedimentation and reduces environmental effects from pollution.
Increases regional water quality.
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-11
Design Standard
Community Outcome
Design stormwater infrastructure to comply with;
CMDG; and
Queensland Urban Drainage Manual,and
Department of Environment and Heritage Protection requirements and guidelines; and
Plans for Trunk Infrastructure – Stormwater.
Free and safe drainage of urban land.
Provision of infrastructure that is fit for purpose and has a viable whole of life cycle cost to the community.
Meets the performance requirements of the infrastructure to ensure water quantity and quality is appropriately managed.
Negative impacts on adjoining and downstream properties are minimised.
Implement Water Sensitive Urban Design principles (including use of bio-retention, trash racks and GPTs) to achieve maximum on site quantity and quality treatment and minimise offsite discharge.
Maximise the water quality within the system.
Maintain or improve water quality and ecological health.
Reduces pollution of waterways.
Provides for combined improvement of the riparian habitat as major ecological corridors within the urban context.
Implement regional and on-site detention facilities to minimise the impact of peak run-off for the full range of events (Q1 to Q100) from developments, taking into account safety and risk. Design detention basins to maintain pre-development peak flow levels from the development site for all flood events (Q1 to Q100) in accordance with Council’s CMDG. Design Detention Basins in the same catchment to ensure that the coincident peak discharge at downstream control points is not increased.
Reduces the cumulative impact from existing and future developments on peak flow levels.
Reduces the need to increase the size of waterway corridors and underground drainage.
Increases active and passive recreation opportunities.
Minimises the impact on the environmental values of downstream waterway corridors by maintaining pre-development flows and velocities.
Reduces downstream sedimentation by slowing flow velocities.
Ensures that cumulative discharge of attenuation systems do not adversely affect parts of the natural catchments.
Reduces pollution to waterways.
4.4.5 Public parks and land for community facilities network
Table 4.4.5.1 Desired Standards of Service – Public parks and land for community facilities
Planning Standard
Community Outcome
Provide a connected and accessible network of parks, open space, and community facilities that meets the needs of the local government’s residents and visitors.
Provides opportunities for access and increased usage of open space, recreational and community facilities.
Provides for an appropriate balance of land uses and ensures high levels of amenity in the urban form.
Provides a basis for a healthy and active community.
Ensure strong linkages and where possible co-location of existing and future parks, open space and community facilities.
Ensures utilisation of existing and future assets while maintaining maximum access.
Makes economic efficiency of land owned by the Community.
Provide a preferred level of development or embellishments to public parks, commensurate with the range of activities envisaged.
Provides safe open space embellishments that meet the needs of the community by providing a range of facilities for social activities and/or fitness/recreational pursuits.
Ensures activities are met and contained within designated areas – reducing potential off site impacts to other more sensitive areas in the Local government area.
Maximises the use of the land and provides the basis for a healthy community.
Ensure that existing and future parks, open space and community facilities with significant environmental, waterway or cultural heritage value are managed appropriately.
Protects and enhances items of cultural interest in the Local government for the benefit of current and future communities in the area.
Provides a basis for tourism opportunities.
Protection of the natural landscape ensures maintenance of quality of air, water and land resources reducing negative impacts requiring amelioration.
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-12
Design Standard
Community Outcome
Public parks and land for community facilities areas are provided in accordance with standard of provision (minimum park size) defined in Table 4.4.5.3 – Public parks and land for community facilities design criteria, and where identified in accordance with the Plans for Trunk Infrastructure – Public parks and land for community facilities .
Provides a standard of service for the Local government’s communities as identified in the Central Highlands Regional Council Open Space and Recreation Plan 2014.
Land and facilities are developed to optimise layout and use.
Facilities are provided in close proximity to the residents of the Local government and provide for a range of active and passive pursuits.
Access to public parks and community facilities are to be in accordance with Table 4.4.5.3 – Public parks and land for community facilities design criteria.
Provides community access to a range of park, open space and community facilities.
Land characteristics including shape, road frontage and gradient are in accordance with the desired land characteristics defined in with Table 4.4.5.3 – Public parks and land for community facilities design criteria.
Topography does not reduce or interfere with amenity and recreation use.
Flood immunity for parks and community lands are achieved in accordance with the provisions defined in Table 4.4.5.3 – Public parks and land for community facilities design criteria.
Ensure adequate provision of safe, accessible and usable facilities.
Public park embellishments are provided in accordance with:
the type and purpose of public park as identified in Table 4.4.5.4;
Plans for Trunk Infrastructure – Public parks and land for community facilities.
Provides a range of park types that are suitability embellished to meeting their purpose within the park hierarchy.
Open Space Provision Tiers
The CHRC Open Space and Recreation Plan (March 2014) established a four tier hierarchy of places that grouped towns and townships based on their size, population and location, as set out in the following table.
Tier Towns and Townships
One Emerald
Two
Blackwater
Capella
Springsure
Tieri
Three
Bauhinia
Bluff
Comet
Dingo
Duaringa
Gemfields (Anakie, Rubyvale, Sapphire and Gemfields Willows)
Rolleston
Four Arcadia Valley
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-13
Table 4.4.5.2 Public parks and land for community facilities design criteria
Park Type Hierarchy Min Park Size Accessibility (catchment)
Land Characteristics
Recreation Local 0.5Ha of usable space
400m (Tier 1 Places) 500m (Tier 2 Places)
Shape: Square to rectangular with sides no greater than 2:1 Gradient: Max 1:10 for 80% of park area Road frontage: 30-50% of perimeter to have direct frontage Flood immunity: 15% of area above Q105 and free of hazards.
District 2Ha of usable space (Tier 1 & 2 Places) 1Ha of usable space (Tier 3 & 4)
1000m (Tier 1 & 2 Places) Central Location (Tier 3 Places)
Shape: Square to rectangular with sides no greater than 2:1 Gradient: Max 1:10 for 80% of park area Road frontage: 30-50% of perimeter to have direct frontage on a collector road Flood immunity: At least 25% of total area to be above Q50 with main activity areas above Q105.
Regional 6Ha of usable space
Central Highlands Region (LGA)
Shape: Square to rectangular with sides no greater than 2:1 Gradient: Average 1:20 for main use areas, 1:50 for kick-about area, and variable for remainder Road frontage: 30-50% of perimeter to have direct frontage on a collector road Flood immunity: At least 50% of total area to be above Q50 with main activity areas above Q100.
Sportsgrounds and Courts
District 3Ha 5 minutes drive Shape: Square or rectangular Gradient: Average 1:80 for all playing surfaces Road frontage: approx.. 25% of perimeter to have direct road frontage Flood immunity: At least 20% of land above Q20, with fields and courts above Q50. Built facilities to be above Q105.
Sportsgrounds and Courts
Regional 6Ha (10Ha+ desirable)
Shape: Square or rectangular Gradient: Max. 1:100 Road frontage: approx.. 25% of perimeter to have direct road frontage Flood immunity: At least 90% of land above Q20, with fields and courts above Q50. Built facilities to be above Q105.
Recreation Corridors Average 6m wide NA Shape: Linear Gradient: As flat as possible to encourage walking and cycling. Road frontage: road frontage where possible for safety and access reasons.
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-14
Park Type Hierarchy Min Park Size Accessibility (catchment)
Land Characteristics
Flood immunity: Minimal, to be assessed on a case-by-case basis.
Table 4.4.5.3 Standard embellishments for public parks
Embellishment type Recreation Sportsgrounds and Courts Recreation Corridors Local District Regional District Regional
Recreation activity area
Bollard fencing
Post and rail fencing Park trees
Bike rack
Small park sign
Large park sign
Water bubbler
Bench seats
Picnic table
Picnic shelter (with table/chairs)
Bins
Park lighting
Barbecues
Shade structure
Irrigation
Amenity Block
Spectator seating
Pathway
Carparking
4.5 Plans for trunk infrastructure
(1) The plans for trunk infrastructure identify the trunk infrastructure networks intended to
service the existing and assumed future urban development at the desired standard of
service up to the planning horizon stated for a trunk infrastructure network in Table 4.5.1 –
Planning horizon for a trunk infrastructure network.
Table 4.5.1 Planning horizon for a trunk infrastructure network
Column 1
Trunk infrastructure network
Column 2
Planning horizon
Water supply 2041
Sewerage 2041
Transport 2061
Parks and land for community facilities 2041
4.5.1 Plans for trunk infrastructure Maps
(1) The existing and future trunk infrastructure networks are shown on the following maps
in Schedule 3—Local government infrastructure plan mapping and tables:
(a) Local Government Infrastructure Plan Maps WS001 – WS024 — Water Supply
plans for trunk infrastructure;
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-15
(b) Local Government Infrastructure Plan Maps SEW001 – SEW008 — Sewerage
plans for trunk infrastructure;
(c) Local Government Infrastructure Plan Maps TR001 – TR013 — Transport plans
for trunk infrastructure;
(d) Local Government Infrastructure Plan Maps SW001 – SW015 — Stormwater
plans for trunk infrastructure;
(e) Local Government Infrastructure Plan Maps PPCL001 – PPCL017 — Public
parks and land for community facilities plans for trunk infrastructure.
(2) The State infrastructure forming part of transport trunk infrastructure network has been
identified using information provided by the relevant State infrastructure supplier.
4.5.2 Schedule of Works
(1) Details of the existing and future trunk infrastructure networks are identified in the
electronic Excel schedule of works model which can be viewed here:
www.centralhighlands.qld.gov.au
(2) The future trunk infrastructure is identified in the following tables in Schedule 3—Local
government infrastructure plan mapping and tables3:
(a) for the water supply network, Table SC3.3.1
(b) for the sewerage network, Table SC3.3.2
(c) for the transport network, Table SC3.3.3
(d) for the parks and community land network, Table SC3.3.4
Editors note ─ Extrinsic material
The below table identifies the documents that assist in the interpretation of the local government infrastructure plan and are extrinsic material under the Statutory Instruments Act 1992. List of extrinsic material
Column 1 Title of document
Column 2 Date
Column 3 Author
Central Highlands Regional Council Basic Community
Profile and Working Population Profile
2011 Australian Bureau of
Statistics (ABS)
Estimated resident population by LGA March 2014 Queensland Government
Statistician’s Office
(QGSO)
Projected population by LGA, 2011 to 2036, 2013 Edition March 2014 QGSO
Bowen Basin Non-resident population projections 2014
to 2020
March 2014 QGSO
3 Due to incomplete network information, a schedule of works for the stormwater network is unable to be included. Recommendations identified as a result of future network planning is anticipated to be incorporated into future amendments to the LGIP
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-16
CHRC Open Space and Recreation Plan 2014 Ross Planning
CHRC Water and Sewerage Planning Study – Capella
Sewage Treatment Plant
2013 Aurecon
Capella Water Supply – Study of Source Supply
Reliability
2014 Aurecon
CHRC Water and Sewerage Planning Study – Capella
Water Treatment Review and Capacity Assessment
2013 Aurecon
CHRC Water and Sewerage Planning Study – Dingo
Water Treatment Plant
2013 Aurecon
CHRC Water and Sewerage Planning Study – Duaringa
Water Treatment Plant
2013 Aurecon
CHRC Water and Sewerage Planning Study – Rolleston
Water Treatment Plant
2013 Aurecon
CHRC Water and Sewerage Planning Study –
Springsure Sewage Treatment Plant
2014 Aurecon
CHRC Water and Sewerage Planning Study – Black
Gully Sewage Treatment Plant
2014 Aurecon
Tieri STP Audit and Upgrade Report 2007 Cardno
Tieri Township Water Treatment System Process
Review and Planning Report
2007 Simmonds and Bristow
CHRC Anakie Water Supply Network Model Build and
Infrastructure Planning
2013 GHD
CHRC Bauhinia Water Supply Network Model Build and
Infrastructure Planning
2013 GHD
CHRC Capella Water Supply and Wastewater Networks
Model Build and Infrastructure Planning
2013 GHD
CHRC Comet Water Supply Network Model Build and
Infrastructure Planning
2013 GHD
CHRC Dingo Water Supply Network Model Build and
Infrastructure Planning
2013 GHD
CHRC Duaringa Water Supply Network Model Build and
Infrastructure Planning
2013 GHD
CHRC Rolleston Water Supply and Wastewater
Networks Model Build and Infrastructure Planning
2013 GHD
CHRC Sapphire and Rubyvale Water Supply Network
Model Build and Infrastructure Planning
2013 GHD
CHRC Springsure Water Supply and Wastewater
Networks Model Build and Infrastructure Planning
2013 GHD
Central Highlands Regional Council Planning Scheme – Amendment No.3 – Gazettal – September 2017 Page 4-17
CHRC Tieri Water Supply and Wastewater Networks
Model Build and Infrastructure Planning
2013 GHD
Report for Blackwater Water and Sewer Model Build and
Infrastructure Planning
2011 GHD
CHRC Emerald Water Supply and Wastewater Networks
Model Build and Infrastructure Planning
2013 GHD
Draft CHRC Planning Scheme 2014 CHRC
CHRC Asset Registers and GIS Data Sets 2014 CHRC
CHRC DCDB and Property Rating/Land Use Data Sets 2014 CHRC
CHRC Development Approval Register and Data 2014 CHRC
Broad Hectare Study 2013 – Central Highlands Regional
Council
2013 Queensland Treasury and
Trade
Biodiversity and Regional Ecosystem Mapping 2014 Queensland Government
Extrinsic Material to the Local Government Infrastructure
Plan
2016 Integran